Equilibrium distribution of diethyl phthalate plasticiser in cellulose acetate-based materials: Modelling and parameter estimation of temperature and composition effects

Understanding the transport and fate of semi-volatile organic compounds (SVOCs) such as phthalates in indoor environments is fundamental for quantifying levels of human exposure and preventing adverse health effects. In this context, the partition coefficient of phthalates between indoor built materials and/or consumer goods and the surrounding atmosphere represents a key parameter for determining concentration distributions. Partition coefficients are also of fundamental importance for describing degradation phenomena associated with plasticiser loss from polymeric materials. However, this key parameter has only been determined for a limited number of systems and environmental conditions. Here, we assess the partitioning behaviour of the diethyl phthalate (DEP) plasticiser in cellulose acetate (CA)-based materials for the first time, determining the effects of temperature and plasticiser composition on equilibrium distributions at temperatures between 20 and 80 °C and using CA samples with DEP contents ranging from 6 to 22 wt%. Additionally, we propose a model to describe and quantify the effect of temperature and plasticiser composition, with model parameters being estimated using non-linear regression and measurements from 130 distinct experiments. Finally, we assess the suitability of our developed model to simulate the migration of DEP from CA-based materials.

Polycaprolactone-blended cellulose acetate thin-film composite membrane for dairy waste treatment using forward osmosis

In recent years new sustainable technology for wastewater treatment has emerged, and among them, forward osmosis (FO) has gained importance. FO utilizes osmotic pressure difference across the semipermeable membrane as the driving force to concentrate the wastewater. Further, the surface and physical properties of the semipermeable FO membrane play a crucial role during the FO process in reducing the internal concentration polarization. In general, FO membranes are prepared using cellulose acetate (CA) polymer due to their high hydrophilic nature. However, CA membranes are mechanically unstable for the FO process. Hence, to increase the mechanical strength and flexibility of CA, other polymers are blended along with it. In this present study, we have prepared a phase-inversion membrane using CA blended with polycaprolactone (PCL) polymers. Further, to increase the hydrophilicity of the membrane, a thin-film composite (TFC) layer of polyamide is coated using interfacial polymerization. To increase the antifouling properties of the membrane, graphene oxide (GO) and copper oxide (CuO) nanoparticles (NPs) are incorporated inside the TFC matrix. The prepared NPs and membrane were characterized using Fourier-transform infrared spectroscopy (FTIR), wide-angle X-ray scattering (WAXD), and contact angle. Further, the GO-CuO incorporated TFC coating has improved the hydrophilicity and antifouling properties of the membrane. It was observed that the water flux has increased up to 5 LMH, and reverse solute flux has reduced to 4 GMH. Further, the membrane was utilized to concentrate in situ prepared dairy waste. It was observed that after 60 min of the FO process, the concentration of dairy waste had increased to 23%, with a concentration factor of 0.903. Thus, a prepared TFC phase inversion membrane is potential for dairy wastewater treatment.

Environmental monitoring of trace metal pollutants using cellulosic-paper incorporating color change of azo-chromophore

An essential requirement for colorimetric paper-sensor is to allow the target analytes (heavy metal ions) to access the chromophore while maintaining strong chromophore immobilization on the porous substrate surface. This work evaluates the selection of sensitive chromophores (dithizone, 1-(2-pyridylazo) 2-naphthol and 4-(2-pyridylazo)-resorcinol) and their immobilization strategies on paper sensors. Dithizone (DTz) are capable of producing a significant color transition at unadjusted pH, observed by UV-Vis absorption spectroscopy and visible recognition. After immobilizing DTz on a paper substrate (cellulose acetate/chitosan substrate), the DTz-paper sensor showed a distinctive color change from blue-green to peach-pink upon reaction with Pb²⁺ ions, and the color intensity was proportional to the metal concentration. Quantitative analysis using RGB (R:Red; G:Green; B:Blue) plots showed that increasing DTz concentration on the CA/CS paper sensor increases the difference in total color intensity (∆I_T) and the difference in red code intensity (∆I_R). This is due to the formation of more DTz-Pb²⁺ complexes on the CA/CS paper substrate. The CA/CS paper strips immobilized with 100 ppm DTz showed practical potential for rapid detection of heavy metal ions. The DTz-CA/CS paper sensor showed significant color change when detecting spiked heavy metals ions (0.1 ppm Pb²⁺, 2.0 ppm Zn²⁺, and 0.2 ppm Cu²⁺) in river water samples that prepared at the maximum permissible limit for industrial effluent in Malaysia.

Effects of cellulose-based bio-plastics on the aerobic biological stabilization treatment of mixed municipal solid waste: A lab-scale assessment

The aim of this work is to assess how the presence of cellulose-based bio-plastics influence the biological stabilization of mixed Municipal Solid Waste (MSW). For the scope, two cellulose acetate bio-plastics have been mixed with a synthetic mixed waste to create samples with and without bio-plastics. A self-induced biostabilization has been carried out for 7 and 14 days where temperature and off-gas have been monitored continuously. Results about temperature evolution, O₂ consumption, CO₂ production and respiratory quotient did not show a substantial difference regarding both the duration of the process and the presence of cellulose-based bio-plastics on the mixture. On the average, the temperature peak and the maximum daily O₂ consumption and CO₂ production were 52.2 °C, 35.81 g O₂/kg DM *d and 48.95 g CO₂/kg DM *d respectively. Disintegration of bio-plastics samples after 7 and 14 days were comparable (on the average 23.13%). The self-induced biostabilization gave its main contribution after 4 days and resulted almost finished at the end of the day 7 of the process. Results showed that cellulose-based bio-plastics did not give a negative effect on mixed MSW biological stabilization and suggest a possible management, aiming at energy recovery of the outputs.

Different faces of cigarette butts, the most abundant beach litter worldwide

Cigarette butts (CBs) are non-biodegradable residues of synthetic origin, prevalent on beaches all over the world. The study evaluates discarded CBs on an intensely used urban beach, determining variations in physical and chemical characteristics. CBs collected were observed, classified, and visually separated according to a proposed scale of four levels of degradation to test the potential match between physical and chemical decay. CBs (un-smoked, smoked, and discarded) were used to determine the average length (cm) and mass (g) in order to observe changes in these parameters among the levels. Cigarette butts experience consecutive mass loss during environmental exposure. Scanning electron microscopy (SEM) images were obtained to assess physical changes in fibers due to smoking. FTIR-ATR was used to assess CBs new (un-smoked), smoked, and discarded samples in relation to cellulose acetate decay. The FTIR-ATR spectroscopy of the most visually degraded cigarette butts indicated modifications in the spectra when compared to un-smoked cigarettes.

Cellulose-acetate coating of carbon cloth diffusion layer for liquid-fed fuel cell applications

Direct glucose fuel cells (DGFCs) and direct methanol fuel cells (DMFCs) commonly supply the reducing agent in liquid (aq.) form. In this work, we present key characteristics of implementing cellulose acetate (CA) coatings, which can subsequently be deacetylated toward cellulose, on carbon cloth used as a fuel diffusion layer in aqueous fuel-fed cells. Specifically, we illustrate functionality with an abiotic glucose fuel cell. Carbon cloth with and without a CA coating (with varying deacetylation) was characterized in terms of liquid permeation rate, electronic conductivity, and roll-off angle wetting characteristics. Additionally, fuel cell power production was measured over a variety of fuel concentrations and alkalinities by generating polarization curve data. These coatings facilitated a significant increase in aqueous solution permeation and adhesion properties, as well as providing up to two-fold increases in maximum power generation in an alkaline DGFC, despite experiencing some decreased conductivity of the carbon cloth diffusion layer.

Culture and maintenance of neural progressive cells on cellulose acetate/graphene‑gold nanocomposites

In this study, the first CA nanofibers were fabricated by electrospinning under optimal conditions: flow rate of 0.5 ml/h, a voltage of 20 kV, electrospinning distance of 15 cm, and an internal temperature of 25 °C, and humidity of 38%. The used Graphene/gold nanoparticles for CA performance improvement were examined by TGA, XRD, and SEM analysis. Then the CA/graphene‑gold nanocomposite was synthesized under optimum electrospinning conditions: flow rate 3 ml/h, voltage 20 kV, electrospinning distance 15 cm, internal temperature 26 °C, and humidity 36%. The SEM images revealed that the nanofibers' thicknesses of Graphene‑gold NPs (CA₁) and Chitosan (CA₂) were 350 and 120 nm, respectively. The XRD diagrams of CA₀, CA₁ and CA₂ revealed the peaks at 2θ, 8°, and 21° with Miller indices of (001) and (110) are related to CA (CA₀), which proves its presence in other scaffolds. The FTIR analysis of samples indicated the presence of graphene‑gold NPs in scaffolding CA₁ and CA₂. The CA₂ nanofibers exhibited a high-water absorption capacity of about 2500% with the water contact-angle and Swelling method. The antibacterial properties of this nanocomposite were also confirmed by an antibacterial test on Staphylococcus aureus bacteria. The growth of Schwann cells on three scaffolds showed the highest growth of cells on CA₁ scaffolds.

Development and characterization of biodegradable ultraviolet protective and antibacterial polylactic acid-cellulose acetate film modified by phenyl salicylate

The polylactic acid composite films were successfully fabricated via the technique of solvent casting using cellulose acetate (20%, wt) as the reinforcing material and phenyl salicylate as the ultraviolet (UV) absorbent and antibacterial agent. Polylactic acid-cellulose acetate-phenyl salicylate composite films displayed complete absorption effect at the region of UV-C (280-100 nm) and UV-B (315-280 nm), and more than 95% UV absorption effect at the region of UV-A (400-315 nm). These results indicate that the UV shielding performance of the composite films could be significantly improve by addition of phenyl salicylate. Moreover, the addition of 20% phenyl salicylate could improve the steam resistance, mechanical properties and thermal stability of the films, and the composite films had also better antibacterial activity against Escherichia coli. The composite films could reduce the decay rate of fresh lilies and extend their storage time. The degradation characteristics of the films were explored in the natural environment and the laboratory level, which provided application prospect for the development of degradable food packaging materials with anti-ultraviolet and anti-bacteria effect.

The influence of bio-plastics for food packaging on combined anaerobic digestion and composting treatment of organic municipal waste

The use of bio-plastic-based packaging as an alternative to conventional plastic packaging is increasing. Among the plethora of different bio-based plastics, the most relevant ones are those that, at the end of their life, can be treated with the organic fraction of municipal solid waste. Even in these cases, their impact on the waste processing and recycling is not always positive. This study aim to assess on a laboratory scale the influence on combined anaerobic digestion and composting industrial processes of a bio-based plastic film, namely cellulose acetate (CA), in pure and modified (additions of additive) forms. CA films were mixed with organic waste and subjected to: (i) anaerobic digestion; (ii) active composting and (iii) two stages of curing composting. Anaerobic digestion and composting were monitored through methane yield and oxygen uptake respectively; additionally, the bio-plastics degree of disintegration was assessed during all the processes. The final disintegration of pure and modified CA was 73.82% and 54.66%, respectively. Anaerobic digestion contributes to the disintegration of the material, while aerobic treatment appears to be nearly ineffective, especially for modified CA. The presence of cellulose acetate during anaerobic digestion of food waste increased the methane yield by about 4.5%. Bioassay confirmed the absence of possible toxic effects on the final compost from the bio-plastic treatment. Although bio-based materials are not the only solution to plastic pollution, the findings confirm the need to upgrade the organic waste treatment plants and the necessity to revise the requirements for the use of compost in agriculture.

Cellulose acetate in fabrication of polymeric membranes: A review

Developing biodegradable polymers to fabricate filtration membranes is one of the main challenges of membrane science and technology. Cellulose acetate (CA) membranes, due to their excellent film-forming property, high chemical and mechanical stability, high hydrophilicity, eco-friendly, and suitable cost, are extensively used in water and wastewater treatment, gas separation, and energy generation purposes. The CA is one of the first materials used to fabricate filtration membranes. However, in the last decade, the possibility of modification of CA to improve permeability and stability has attracted the researcher's attention again. This review is focused on the properties of cellulose derivatives and especially CA membranes in the fabrication of polymeric separation membranes in various applications such as filtration, gas separation, adsorption, and ion exchange membranes. Firstly, a brief introduction of CA properties and used molecular weights in the fabrication of membranes will be presented. After that, different configurations of CA membranes will be outlined, and the performance of CA membranes in several applications and configurations as the main polymer and as an additive in the fabrication of other polymer-based membranes will be discussed.

Bioactive tri-component nanofibers from cellulose acetate/lignin//N-vanillidene-phenylthiazole copper-(II) complex for potential diaper dermatitis control

Current research targets innovative medical textiles of nanofibrous nature and antibacterial activity to prevent diaper dermatitis. The work is based on electrospun nanofibers from cellulose acetate (CA) and lignin (Lig) polymers. A series of new copper complexes were synthesized and loaded to the CA/Lig solution mix then subjected to electrospinning, giving rise to the tricomponent bioactive mats CA/Lig/Cu-complex. The surface morphology of electrospun nanofiber mats was smooth and homogenous as the concentration of lignin increased in the mixture. The incorporation of lignin improved the electrospinnability of the cellulose acetate; however, it increased the fiber diameter. The water contact angle, absorption underload were significantly improved as lignin content increased. The incorporation of Cu-complex in electrospun CA and CA/Lig fiber mats occurred without any substantial change in the surface morphology, indicating well encapsulation of the complex. The electrospun mats were active against Pseudomonas aeruginosa, Acinetobacter baumannii, Staphylococcus epidermidis, and Streptococcus faecalis. The cytotoxicity, protein leakage, and biological results, together with the above studies, would advocate copper complex loaded CA/Lig nanofibers as a potential candidate for hygienic applications.

High-performance cellulose acetate-based gas barrier films via tailoring reduced graphene oxide nanosheets

Improving the gas molecule barrier performance and structural stability of bio-plastic films dramatically contribute to packaging and protective fields. Herein, we proposed a novel nanocomposite film consisting of cellulose acetate (CA)/polyethyleneimine (PEI)/reduced graphene oxide (rGO)-NiCoFeO_x) with high gas barrier property by applying "molecular glue" and "nano-patching" strategies. Systematical investigations demonstrated that the CA/rGO interfacial interaction was effectively enhanced due to the "molecular glue" role of PEI chains via physical/chemical bonds and the defective regions in rGO plane were nano-patched through hydrophilic interactions between edged oxygen-containing functional groups and ultrafine NiCoFeO_x nanoparticles (~3 nm). As a result, the oxygen and moisture transmission rates of the prepared CA/PEI/rGO-NPs hybrid film were significantly reduced to 0.31 cm³ ∗ μm/(m² ∗ d ∗ kPa) and 314.23 g/m² ∗ 24 h, respectively, which were 99.60% and 54.69% lower than pristine CA films. Meanwhile, the tensile strength of hybrid film was increased from 25.90 MPa to 40.67 MPa. More importantly, the designed nanocomposite film possesses excellent structural stability without obvious GO layer shedding and hydrophobicity attenuation after persistent bending at least 100 times. The exceptional robust and high gas barrier film displays great promising application in food, agriculture, pharmaceuticals and electronic instruments packaging industry.

Novel reusable amine-functionalized cellulose acetate beads impregnated aminated graphene oxide for adsorptive removal of hexavalent chromium ions

In this study, a multi-featured adsorbent was developed for the adsorptive removal of hexavalent chromium (Cr⁶⁺) ions. Herein, aminated graphene oxide (GO-NH₂) was firstly synthetized and incorporated into cellulose acetate beads (CA) which were followed by surface amine-functionalization process. Varies characterization tools such as FT-IR spectroscopy, SEM, TGA, XRD, BET, XPS and zeta potential were employed to ensure the successful fabrication of GO-NH₂@CA-NH₂ composite beads. An enhancement in the adsorption performance was attained, while the adsorption equilibrium was closely gotten within only 60 min. Therefore, the adsorption capacity was boosted with increasing GO-NH₂ ratio in the beads matrix from 10 to 25%. Furthermore, the adsorption process agreed with Freundlich isotherm model with a supreme adsorption capacity of 410.21 mg/g at pH 2, while data followed the pseudo-second-order kinetic model. Besides, thermodynamic studies denoted that the adsorption process was endothermic, randomness and spontaneous. The composite beads retained better adsorption characteristics for seven sequential cycles with ease of separation. The proposed adsorption of Cr⁶⁺ onto GO-NH₂@CA-NH₂ surface occurred via the electrostatic interactions, reduction process and coordinate-covalent bonds. These findings hypothesize that the fabricated GO-NH₂@CA-NH₂ beads could be act as easy-separable and reusable adsorbent for efficient adsorption of Cr⁶⁺ ions.

Highly sensitive formaldehyde sensors based on CuO/ZnO composite nanofibrous mats using porous cellulose acetate fibers as templates

An innovative formaldehyde sensor based on CuO/ZnO composite nanofibrous mats (C-NFMs) coated quartz crystal microbalance (QCM), which is capable of stable determination of formaldehyde gas at ambient temperatures sensitively and selectively, has been successfully fabricated. Triaxial and highly porous C-NFMs with high surface area (126.53 m² g^-1) were synthesized by electrospinning a sol-gel cellulose acetate (CA)/CuAc₂/ZnAc₂ complex solution and following by calcination process. Benefiting from the unique heterojunction structure, immense pore interconnectivity and large surface area of C-NFMs, the as-developed QCM sensors exhibited an extremely low limit of detection (LOD) down to 26 ppb and a limit of quantification value equals to 87 ppb. Besides, the C-NFMs coated QCM sensors also demonstrated short response times (80s), the long-term stability during 3 weeks as well as good selectivity to formaldehyde over diverse volatile organic compounds. The sorption equilibrium in the adsorption process of QCM coated sensors was well met with the Freundlich model, which certified the heterogeneous adsorption between formaldehyde gas and C-NFMs.

Fabrication, characterization and in vitro evaluation of disulfiram-loaded cellulose acetate/poly(ethylene oxide) nanofiber scaffold for breast and colon cancer cell lines treatment

Cancer and microbial infections threaten human health. Currently, chemotherapeutic drugs for cancer lack selectivity between normal and cancer cells, exacerbating this problem. Effective anticancer drug encapsulation is the golden key to solving this issue. Disulfiram (DS), an anticancer drug, has low solubility and selectivity and to tackle this concern, cellulose acetate (CA) and poly (ethylene oxide) (PEO) was selected as a matrix to prepare nanofiber containing DS (DS@CA/PEO) via electrospinning technique. DS@CA/PEO nanofiber was characterized by SEM, FTIR, TGA, and X-rd patterns and the results confirmed DS incorporation in CA/PEO nanofiber. DS@CA/PEO nanofiber scaffold showed higher safety than DS-free on human normal cells (Wi-38) with revealing similar anticancer activity of DS-free against colon cancer line (Caco-2) and breast cancer line (MDA-MB 231). This higher selectivity of DS@CA/PEO towards cancer cells than normal cells was associated with maintaining apoptotic activity and aldehyde dehydrogenase-inhibitory potency of DS. The latter efficacy led to eradicating colon and breast cancer stem cells, as evidenced by flow cytometry. Moreover, DS@CA/PEO nanofiber scaffold showed potent antibacterial activity (in vitro) against both Gram-negative and Gram-positive bacteria. These results investigated that DS@CA/PEO nanofiber scaffold could be a potential dual candidate as a selective anticancer and antimicrobial agent.

Enhanced water flux and bacterial resistance in cellulose acetate membranes with quaternary ammoniumpropylated polysilsesquioxane

An enhanced water flux and anti-fouling nanocomposite ultrafiltration membrane based on quaternary ammoniumpropylated polysilsesquioxane (QAPS)/cellulose acetate (QAPS@CA) was fabricated by in situ sol-gel processing via phase inversion followed by quaternization with methyl iodide (CH₃I). Membrane characterizations were performed based on the contact angle, FTIR, SEM, and TGA properties. Membrane separation performance was assessed in terms of pure water flux, rejection, and fouling resistance. The 7%QAPS@CA nanocomposite membrane showed an increased wettability (46.6° water contact angle), water uptake (113%) and a high pure water permeability of ∼370 L m^-2 h^-1 bar^-1. Furthermore, the 7%QAPS@CA nanocomposite membrane exhibited excellent bactericidal properties (∼97.5% growth inhibition) against Escherichia coli (E. coli) compared to the bare CA membrane (0% growth inhibition). The 7%QAPS@CA nanocomposite membrane can be recommended for water treatment and biomedical applications.

Cellulose acetate fibres loaded with daptomycin for metal implant coatings

Multifunctional polymeric coatings containing drug delivery vehicles can play a key role in preventing/reducing biofilm formation on implant surfaces. Their requirements are biocompatibility, good adhesion, and controllable drug release. Although cellulose acetate (CA) films and membranes are widely studied for scaffolding, their applications as a protective coating and drug delivery vehicle for metal implants are scarce. The reason is that adhesion to stainless steel (SS) substrates is non-trivial. Grinding SS substrates enhances the adhesion of dip-coated CA films while the adhesion of electrospun CA membranes is improved by an electrosprayed chitosan intermediate layer. PMMA microcapsules containing daptomycin have been successfully incorporated into CA films and fibres. The released drug concentration of 3 × 10^-3 mg/mL after 120 min was confirmed from the peak luminescence intensity under UV radiation of simulated body fluid (SBF) after immersion of the fibres.

Quantification of microplastics in sediments from Narragansett Bay, Rhode Island USA using a novel isolation and extraction method

Microplastics are small plastic particles found ubiquitously in marine environments. In this study, a hybridized method was developed for the extraction of microplastics (45-1000 μm) from sediments using sodium bromide solution for density separation. Method development was tested using spiked microplastics as internal standards. The method was then used to extract microplastics from sediments in Narragansett Bay, Rhode Island, USA. Suspect microplastics were analyzed with Raman spectroscopy. Microplastic abundance ranged from 40 particles/100 g sediment to 4.6 million particles/100 g sediment (wet weight). Cellulose acetate fibers were the most abundant microplastic. These results are some of the first data for microplastics in Rhode Island sediments.

Efficient separation of acetylated cellulose from eucalyptus and its enhancement on the mechanical strength of polylactic acid

A simplified and green strategy was provided for the synthesis of cellulose acetate. Cellulose acetate (CA) was isolated from the directly acetylated eucalyptus powder after hydrothermal treatment to selectively remove hemicellulose without delignification. The conversion rate of cellulose (90.75%) and the yield of the acetylated product (61.34%) were greatly improved by hydrothermal treatment, while the re-condensation of lignin during hydrothermal treatment made no adverse difference. The characterization results verified that the acetylated product was cellulose acetate with uniform molecular weight, good thermal stability and semi-crystalline structure. Moreover, CA was used to reinforce polylactic acid (PLA) films prepared by solvent casting. The PLA-CA composite with 5 wt% CA showed an increase of 80.63% in tensile strength and 59.51% in Young's modulus, and their density decreased from 1.2427 g/cm³ to 1.0028 g/cm³. The lightweight and excellent mechanical properties promote the application potential of biodegradable composites to replace petroleum-based plastics.

3D-cellulose acetate-derived hierarchical network with controllable nanopores for superior Li+ transference number, mechanical strength and dendrites hindrance

The dendrites is deemed to be one of the most crucial problems for lithium-ion batteries because it hampers their safety and cycling performance severely. Herein, a cellulose acetate-based separator with uniformly distributed nanopores was engineered and successfully prepared through a simple one-step process. The controlled nanopores promoted uniform transmission of ions and the cellulose acetate backbone inhibited the transference of anions, and prevented large-scale accumulation of lithium ions, thereby restricting the nucleation and growth of dendrites. The 3D-networked separator exhibited capacity retention of 78.6% after 900 cycles at 1C, with the breaking elongation and the strength increased by 620% and 28.4%, respectively, which originated from the porosity controlling of the nanofiber inter-bridging. The nanopore-assembled structure of 3D-hierarchy with MOFs provided the channels for the lithium ions transference through the separator and hence tackled the major challenge of mechanical vulnerability and electrochemical instability, which have never been reported before. Therefore, the developed strategy may offer a powerful and effective alternative for conventional approach of occurring dendrites post-treatments for higher ionic conductivity.

Deacetylated cellulose acetate nanofibrous dressing loaded with chitosan/propolis nanoparticles for the effective treatment of burn wounds

Every year, about 1 out of 9 get burnt in Egypt, with a mortality rate of 37%, and they suffer from physical disfigurement and trauma. For the treatment of second-degree burns, we aim at making a smart bandage provided with control of drug release (using chitosan nanoparticles) to enhance the healing process. This bandage is composed of natural materials; namely, cellulose acetate (CA), chitosan, and propolis (bee resin) as the loaded drug. Cellulose acetate nanofibers were deacetylated by NaOH after optimizing the reaction time and the concentration of NaOH solution, and the product was confirmed with FTIR analysis. Chitosan/propolis nanoparticles were prepared by ion gelation method with size ranging from 100 to 200 nm and a polydispersity index of 0.3. Chitosan/propolis nanoparticles were preloaded in the CA solution to ensure homogeneity. Loaded deacetylated cellulose nanofibers have shown the highest hydrophobicity measured by contact angle. Cytotoxicity of propolis and chitosan/propolis nanoparticles were tested and the experimental IC₅₀ value was about 137.5 and 116.0 μg/mL, respectively, with p-value ≤0.001. In addition, chitosan/propolis nanoparticles loaded into cellulose nanofibers showed a cell viability of 89.46% in the cell viability test. In-vivo experiments showed that after 21 days of treatment with the loaded nanofibers repairing of epithelial cells, hair follicles and sebaceous glands in the skin of the burn wound were found in albino-mice model.

Preparation of bio-based cellulose acetate/chitosan composite film with oxygen and water resistant properties

Plastic pollution has inspired the preparation of environmentally friendly bio-based plastics that can replace petroleum-based plastics. Herein, a composite film with oxygen and water resistant properties was prepared by a fluidized bed method, employing bio-based cellulose acetate (CA) as raw material, glycerol as a plasticizer, and chitosan and silica as additives. The addition of 15% chitosan greatly reduced the oxygen transmission rate of the CA film by 83.5%, and increased the tensile stress and tensile strain of the composite membrane, reaching 26.5 MPa and 22.2%, respectively. The deposition of silica particles is able to compensate for the undesired increase in the hydrophilicity caused by the addition of chitosan, and tune the hydrophilic nature of the surface of the CA/CS films to the hydrophobic nature, which is desirable for water-resistant applications. The prepared composite film displays good oxygen and water resistant properties and can be used for food packaging and related applications.

Cellulose acetate-based membranes by interfacial engineering and integration of ZIF-62 glass nanoparticles for CO2 separation

Composite membranes typically used for gas separation are susceptible to interfacial voids and CO₂ plasticization which adversely affects the gas permeation performance. This paper evaluates routes towards the enhancement of CO₂ permeation performance and CO₂ plasticization resistance of composite membranes using non-stoichiometric ZIF-62 MOF glass and cellulose acetate (CA). Single and mixed gas permeation results, obtained with CO₂ and CH₄, demonstrate that the presence of ZIF-62 glass in CA polymer enhanced the CO₂ permeability and CO₂/CH₄ ideal selectivity from 15.8 to 84.8 Barrer and 12.2-35.3, respectively. The composite membrane loaded with 8 wt% of ZIF-62 glass showed the highest CO₂ permeability and CO₂/CH₄ ideal selectivity of 84.8 Barrer and 35.3, which were 436.7% and 189.3% higher compared to the pristine CA membrane, respectively. A CO₂ plasticization pressure of 26 bar was achieved for the composite membranes, which is 160% higher compared to the pristine CA membranes, at about 10 bar. The mechanisms for the materials stabilization and greater separation performance were attributed to higher pore size (7.3 Å) and significant CO₂ adsorption on the unsaturated metal nodes followed by metal cites electrostatic interaction with CO₂. These findings confirm the potential of ZIF-62 glass materials as promising materials solutions towards the design of composite membranes for CO₂ separation at industrial scale.

Observable removal of pharmaceutical residues by highly porous photoactive cellulose acetate@MIL-MOF film

Pharmaceutical products are used tremendously worldwide and subsequently released into wastewater even at very low concentration caused serious environmental problem due to their high activity. Therefore, the present work focuses on remarkable removal of paracetamol as one from the most used pharmaceutical intermediates, by using porous film based on cellulose acetate@metal organic framework (CA@Ti-MIL-NH₂). The film was designed to achieve extreme removal of paracetamol by action of both of adsorption and degradation. Metal organic frame work was directly synthesized and inserted within the pre-prepared porous CA film to obtain porous CA@Ti-MIL-NH₂ film. The synthesized films were applied in adsorption and photo-degradation of paracetamol separately and together. Due to the photocatalytic activity of Ti-MIL-NH_2, the photo-degradation of paracetamol in visible-light was much effective and considerably high degradation of paracetamol was observed (k₁ = 760.0 m^-1) comparing to the adsorption (k₁ = 160.0 m^-1). The overall removal of paracetamol was significantly enlarged from 82.7 mg/g for CA film to 519.1 mg/g for porous CA@Ti-MIL-NH₂ film. The used film exhibited quite good reusability and the removal of paracetamol was lowered from 96% to 85% after 5 regeneration cycles. Results of total organic carbon confirmed that paracetamol was fully degraded to CO₂ and water.

Cost-effective and recyclable aerogels from cellulose acetate for oil spills clean-up

Cigarette butts are the most known variety of anthropogenic litter on Earth, which consists mainly of cellulose acetate. It can be prepared as aerogel which can be used to remove oil pollution caused by heavy shipping traffic in the Baltic Sea. It is prepared as a solution in acetone which then is poured into water and oven-dried afterwards. The hydrophobicity can be simply improved by wetting with a little amount of oil. Aerogel's sorption capacity, as well as its regeneration for sorption of crude oil, marine diesel oil, and biodiesel sorption from water surface, has been estimated. Their recyclability to fresh samples with re-characterization has been also determined. It has been found that multiple use of cellulose acetate aerogels is not effective because the sorption capacity decreases by up to 80% after a single use. However, the sorption capacity of recycled samples decreases by only 20% on average compared to the samples from the first batch. This capacity could be fully exploited during the life cycle of cellulose acetate.