Metagenomic analysis reveals the efficient digestion mechanism of corn stover in Angus bull rumen: Microbial community succession, CAZyme composition and functional gene expression

Ruminant rumen is a biological fermentation system that can efficiently degrade lignocellulosic biomass. The knowledge about mechanisms of efficient lignocellulose degradation with rumen microorganisms is still limited. In this study, composition and succession of bacteria and fungi, carbohydrate-active enzymes (CAZymes), and functional genes involved in hydrolysis and acidogenesis were revealed during fermentation in Angus bull rumen via metagenomic sequencing. Results showed that degradation efficiency of hemicellulose and cellulose reached 61.2% and 50.4% at 72 h fermentation, respectively. Main bacterial genera were composed of Prevotella, Butyrivibrio, Ruminococcus, Eubacterium, and Fibrobacter, and main fungal genera were composed of Piromyces, Neocallimastix, Anaeromyces, Aspergillus, and Orpinomyces. Principal coordinates analysis indicated that community structure of bacteria and fungi dynamically changed during 72 h fermentation. Bacterial networks with higher complexity had stronger stability than fungal networks. Most CAZyme families showed a significant decrease trend after 48 h fermentation. Functional genes related to hydrolysis decreased at 72 h, while functional genes involved in acidogenesis did not change significantly. These findings provide a in-depth understanding of mechanisms of lignocellulose degradation in Angus bull rumen, and may guide the construction and enrichment of rumen microorganisms in anaerobic fermentation of waste biomass.

Volatile fatty acid production from primary and secondary sludges to support efficient nutrient management

Enhanced hydrolysis of sludges during fermentation is an important factor to achieve solubilization of complex carbon sources and increase the amount of soluble COD that microorganisms could use as food during biological nutrient removal processes. This research shows that a combination of mixing, bioaugmentation, and co-fermentation can be used to increase the hydrolysis of sludges and enhanced the production of volatile fatty acids (VFA). Mixing of primary sludge (PS) at 350 revolutions per minute (RPM) during fermentation increased the hydrolysis of the sludge and increased the soluble chemical oxygen demand (sCOD) by 72% compared to no mixing. Mixing also increased the production of VFA by 60% compared to no mixing conditions. PS hydrolysis was also evaluated using bioaugmentation with the bacteria Bacillus amyloliquefacients, a known producer of the biosurfactant surfactin. Results showed that bioaugmentation enhanced the hydrolysis of the PS by increasing the amount of soluble carbohydrates and soluble proteins present in the form of sCOD. Methanogenesis experiments performed with co-fermentation of decanted primary sludge (PS) and raw waste-activated sludge (WAS) at 75:25 and 50:50 ratios displayed a decreased in production of total biogas by 25.58% and 20.95% and a reduction on methane production by 20.00% and 28.76% respectively, compared to co-fermentation of raw sludges. Compared to fermentation of the sludges separately, co-fermentation of PS and WAS increased the production of VFA and it was determined that 50:50 was the optimum co-fermentation ratio for production of VFA while reducing the reintroduction of nutrients produced during the fermentation process to BNR processes.

The preparation of Diacylglycerol-rich soybean oil by acetylated modification of arachin nanoparticles for W/O Pickering emulsion system

Pickering emulsion catalytic system (PEC) stabilized by nanoparticles is an efficient catalytic platform. Herein, a high-performance PEC was constructed by acetylated modification of arachin nanoparticles (AAPs). The results showed the pI of arachin was decreased from pH 5.5 to pH 3.5. The surface hydrophobicity index was significantly increased (from 56.28 ± 4.23 to 120.77 ± 0.79) after acetylated modification. The three-phase contact angle of AAPs was 91.20 ± 0.98°. AAPs were used as lipase immobilization carriers to increase the activity of free lipase fabricating lipase-AAPs. The immobilization efficiency and activity of lipase-AAPs were 12.95 ± 0.03% and 1.74 ± 0.07 U/mg, respectively. Enzymatic reaction kinetics showed that V_m of lipase-AAPs was twice of free lipase. K_m was 1/5 of free lipase. The catalytic efficiency of PEC to prepare DAG was 2.36 times of biphasic catalytic system (BCS). This work provided a promising way to promote the efficiency of DAG preparation.

Production of antifungal iturins from vegetable straw: A combined chemical-bacterial process

A combined chemical-bacterial process was developed to convert vegetable straw waste to high value antifungal iturins. Straws from three widely cultivated vegetable (cucumber, tomato and pepper) were evaluated as feedstocks for iturin production. Microwave assisted hydrolysis with very dilute acid (0.2% w/w H₂SO₄) achieved efficient reducing sugar recovery. The high glucose concentration in non-detoxified hydrolysate from pepper straw facilitated the optimal growth of Bacillus amyloliquefaciens strain Cas02 and stimulated the production of iturin. The fermentation parameters were optimised to enhance the iturin production efficiency. The obtained fermentation extract was further purified using macroporous adsorption resin, resulting in an iturin-rich extract that exhibited strong antifungal activity against Alternaria alternata with an IC50 of 176.44 μg/mL. Each iturin homologue was identified using NMR. Overall, 1.58 g iturin-rich extract containing 164.06 mg/g iturins was obtained from 100 g pepper straw, illustrating the great potential of valorising pepper straw via this process.

CuCoO2 Nanoparticles as a Nanoprotease for Selective Proteolysis with High Efficiency at Room Temperature

Many nanoproteases contain tetravalent metal ions and catalyze peptide-bond hydrolysis only at high temperature (60 °C). Here, we report a new and effective strategy to explore nanoproteases from the nanoparticles containing low valent metal ions. We found that flower-like CuCoO2 nanoparticles (CuCoO2 NPs) containing low valent Cu+ possessed excellent catalytic activity towards selective cleavage of peptide bonds with hydrophobic residues in bovine serum albumin (BSA) at room temperature. CuCoO2 NPs exhibited excellent stability and had great reuse performance. CuCoO2 NPs also hydrolyzed heat-denatured and surfactant-denatured BSA. Mechanism analysis revealed that the high Lewis acidity of Co3+ and the low valence of Cu+ were both essential for the high protease activity of CuCoO2 NPs. The flower-like structure of CuCoO2 NPs and the strong nucleophilicity of Cu+-bound hydroxyl endue them with excellent catalytic performance. The findings open a new way for design and discovery of high-efficiency nanoproteases.

Catalytic degradation of propetamphos and azamethiphos using silver ion

In this study, the degradation of two organophosphate pesticides, namely, propetamphos and azamethiphos, in the presence of Ag⁺ at different mole ratios was investigated. Moreover, the kinetic and degradation pathways of both chemicals in the range of 0-60 min were explored. Gas chromatography equipped with a thermionic specific detector was used to investigate the pesticide degradation kinetics and mechanism. The results show that the degradation rate of both pesticides follows first-order kinetic. The first-order rate constant and the half-life of reaction were in the range of 0.002-0.143 min^-1, 187-2.1 min, and 0.005-0.164 min^-1 and 60-1.8 min, for propetamphos and azamethiphos, respectively, at ambient temperature (25 ºC). Because group containing sulfur atom is a better leaving group than group containing nitrogen, the rate of degradation of azamethiphos is higher than propetamphos. In a higher mole ratio of Ag⁺ to pesticides, the degradation rate was increased, and it is possible to predict the rate of degradation of pesticides according to the chemical composition of leaving group.

The prediction of hydrolysis and biodegradation of Novichoks using in silico toxicology methods

Novichoks constitute a relatively new class of nerve agents of extreme toxicity that we have had the opportunity to experience three times already. After the first case (Salisbury, UK), a public debate about Novichoks began, which resulted in the realisation of the nature of these chemicals. From a social security point of view, examining their properties, especially toxicological and environmental aspects, are crucial. After the CWC (Chemical Warfare Agent) list update, the candidate structures for the Novichoks may be over 10,000 compounds. It would be extremely laborious to conduct experimental research for each. Understanding their environmental persistence and health hazards is an essential national issue. Moreover, due to the high risk posed by contact with hazardous Novichok substances, in silico research was applied to estimate hydrolysis and biodegradation safely. The present study elucidates, using QSAR models, the environmental fate of the Novichoks studied (n = 17). The results indicate that Novichoks released into the environment hydrolyse at various rates, from extremely fast (<1 day) to very slow (more than a year). Furthermore, ultimate biodegradation from weeks to months is expected for most compounds, which classifies them as relatively difficult biodegradable. Applying reliable in silico methods (QSAR Toolbox and EPI Suite) for predicting various parameters is crucial to prepare for the upcoming usage of Novichoks.

Overlooked effect of ordinary inorganic ions on polyaluminum-chloride coagulation treatment

Application of poly-aluminum chloride (PACl) coagulant is a popular mode of water treatment worldwide because of the high capacity of PACl to neutralize charge. The manufacture and use of PACls with various basicities in different regions around the world suggest that the characteristics of the raw water are important determinants of the efficacy of PACl application. However, attention has not been fully paid to the effects of water quality other than the substances to be removed. In this study, two typical PACls with different basicities were used to investigate why the performance of PACls depends on the characteristics of the raw water. We focused on the concentrations of inorganic ions in the raw water. Use of high-basicity PACl (HB-PACl) with a high content of polymeric-colloidal species (Al_b+Al_c) resulted in very slow floc formation and little turbidity removal in raw water with low concentrations of sulfate ions. The performance of the HB-PACl was inferior to that of normal-basicity PACl (NB-PACl), although the charge-neutralization capacity of the HB-PACl was higher. Rates of floc formation were strongly correlated with the rate of aluminum precipitation by hydrolysis reaction, which was identified as an indicator for evaluating the compatibility of raw water with PACl treatment. Among the common ions in natural water, the sulfate ion had the greatest ability to hydrolyze and precipitate PACl because of its divalency and tetrahedral structure. This conclusion followed from experimental results showing similar effects for selenate and chromate ions as for sulfate ions and somewhat smaller effects for thiosulfate ions. Bicarbonate ions and natural organic matter affected PACl hydrolysis-precipitation, but chloride ions, nitrate ions, and cations had little effect on PACl hydrolysis-precipitation. Interestingly, the abilities of sulfate ions to hydrolyze HB-PACl and NB-PACl were very similar, but bicarbonate ions were less effective in hydrolyzing HB-PACl than NB-PACl, and bicarbonate ions contributed little to the hydrolysis-precipitation of HB-PACl in raw water with normal alkalinity. Therefore, sufficient coagulation with HB-PACl therefore usually requires a certain concentration of sulfate ions in water to be treated. The implication is that which anions are most influential to the hydrolysis-precipitation of PACl, and thus to PACl's coagulation ability depends on the constituents of the PACl.

Synergetic effect of Au nanoparticles and transition metal phosphides for enhanced hydrogen evolution from ammonia-borane

The hydrogen evolution from ammonia borane is intriguing but challenging due to its sluggish kinetics. In this regard, the gold nanoparticles amalgamation with metal phosphides is speculated to be more efficient catalysts. Here, the catalysts Au/Ni₂P and Au/CoP with the high synergetic effect of Au nanoparticles and metal phosphides were synthesized for ammonia borane hydrolysis. The activity of Au/Ni₂P increases 4.8-fold (i.e., 0.08 to 0.40 L∙h^-1) compared to pristine Ni₂P, and the activity of Au/CoP increases 1.7-fold (i.e., 0.74 to 1.27 L∙h^-1) compared to pristine CoP. This reveals that the synergetic effect of Au^δ+ and (Ni₂P) ^δ- is stronger than Au^δ+ and (CoP) ^δ- which is manifested by XPS analysis. The kinetics exposes that the activation energy of Au/Ni₂P (45.28 kJ∙mole^-1) is greater than Au/CoP (31.45 kJ∙mole^-1) and the TOF of Au/Ni₂P is less than Au/CoP. This research work presents an effective approach for producing active sites of Au^δ+ and (Ni₂P & CoP) ^δ- for ammonia borane hydrolysis to enhance the H₂ evolution rate.

Improving microbial and lipid oxidative stability of cheddar cheese using cricket protein hydrolysates pre-treated with microwave and ultrasonication

The study was carried out to investigate cricket protein hydrolysates' (CPH) potential to enhance the storage stability of cheddar cheese. The cricket protein (CP) samples pre-processed with microwave (T₁), ultrasonication (T₂) or without pre-treatment (T₀) were used for developing the CPH using alcalase enzyme (3%). Freeze-dried CPH were incorporated in the cheese samples (CPH-T₁, CPH-T₂ and CPH-T₀) at the maximum level of 1.5% and were analysed for quality during 3 months of storage (4 ± 1 °C) compared to the control samples without CPH. The pre-treatments significantly improved the antimicrobial and antioxidant potential of the CPH. The CPH exhibited a significant positive effect on antioxidant potential, lipid stability, protein oxidation, microbial growth, and sensory quality of the cheddar cheese during storage. Digestion simulation showed a significant positive impact on the antioxidant activity of the cheddar cheese. Our results indicate the potential of CPH to enhance the quality of fat-rich foods during storage.

Facile construction of robust Ru-Co3O4 Mott-Schottky catalyst enabling efficient dehydrogenation of ammonia borane for hydrogen generation

Developing efficient catalysts for the dehydrogenation of ammonia borane (AB) is important for the safe storage and controlled release of hydrogen, but it is a challenging task. In this study, we designed a robust Ru-Co₃O₄ catalyst using the Mott-Schottky effect to induce favorable charge rearrangement. The self-created electron-rich Co₃O₄ and electron-deficient Ru sites at heterointerfaces are indispensable for the activation of the B-H bond in NH₃BH₃ and the OH bond in H₂O, respectively. The synergistic electronic interaction between the electron-rich Co₃O₄ and electron-deficient Ru sites at the heterointerfaces resulted in an optimal Ru-Co₃O₄ heterostructure that exhibited outstanding catalytic activity for the hydrolysis of AB in the presence of NaOH. The heterostructure had an extremely high hydrogen generation rate (HGR) of 12238 mL min^-1 g_cat^-1 and an expected high turnover frequency (TOF) of 755 mol_H2 mol_Ru^-1 min^-1 at 298 K. The activation energy needed for the hydrolysis was low (36.65 kJ mol^-1). This study opens up a new avenue for the rational design of high-performance catalysts for AB dehydrogenation based on the Mott-Schottky effect.

Investigating the synergic role of asynchronous dosed protease and lysozyme for facilitating excess sludge solubilization and acidogenic fermentation

Improving the anaerobic fermentation (AF) efficiency of excess sludge (ES) is essential for attaining biosolid minimization, stabilization, resource recovery, and carbon-emission reduction. Along these lines, here, the synergistic mechanism of protease and lysozyme for enhancing hydrolysis and AF efficiency with better recovery of volatile fatty acids (VFAs) was thoroughly investigated. Single lysozyme was capable of reducing the zeta potential and fractal dimension when dosed into the ES-AF system, which was beneficial for increasing the contact probability between proteases and extracellular proteins. Moreover, the weight-averaged molecular weight of the loosely-bound extracellular polymeric substance (LB-EPS) reduced from 1867 to 1490 in the protease-AF group, which facilitated the penetration of EPS by the lysozyme. The soluble DNA and extracellular DNA (eDNA) of the enzyme cocktail pretreated group increased by 23.24 % and 77.09 %, and the cell viability decreased after 6-hour hydrolysis, demonstrating a better hydrolysis efficiency. Remarkably, the asynchronous dosed enzyme cocktail pretreatment was proven a better strategy to enhance both the solubilization and hydrolysis processes since the synergistic effect of these two enzymes can exclude the mutual interference. As a result, the VFAs were increased by 1.26 times higher than the blank group. The underlying mechanism of an environmental-friendly and effective strategy was examined to promote ES hydrolysis and acidogenic fermentation, which was beneficial for the recovery of VFAs and carbon-emission reduction.

Conversion of polyethylene terephthalate waste into high-yield porous carbon adsorbent via pyrolysis of dipotassium terephthalate

A method for conversion of polyethylene terephthalate (PET) waste into porous carbon material is proposed. The recycling of PET bottle waste includes the stages of low-temperature hydrolysis of the polymer and subsequent pyrolysis at 800 °C. To provide PET hydrolysis at ∼150 °C and atmospheric pressure, the polymer was pre-dissolved in dimethyl sulfoxide and then an aqueous solution of potassium hydroxide was added. The potassium terephthalate formed as a result of the alkaline hydrolysis of PET allows the carbon-containing precursor to be preserved for further activation to temperatures beyond 600 °C. The proposed method leads to the formation of a porous carbon material, increasing the yield of carbon residue to 25 wt%, which is higher compared to the yield of carbon residue in the direct pyrolysis of PET. The obtained porous carbon is characterized by graphite-like structure and specific surface area of ∼1100 m² g^-1. It has been shown that PET-derived carbon material can be used to remove pollutants from aqueous media. The adsorption properties of the carbon material were demonstrated by adsorption of methylene blue from an aqueous solution. The capacity of the carbon material was found to be 443 mg g^-1.

Optimization and scale up of the enzymatic hydrolysis of Californian red worm protein (Eiseniafoetida)

Although the best-known use of the different species of earthworm is the production of organic fertilizer, they can also be considered a rich source of biologically and pharmacologically-active compounds, for use in the treatment of various diseases. In recent decades, with the development of biochemical technologies, research on the pharmaceutical effects of compounds extracted from different species of earthworms has begun. Enzymatic hydrolysis is the most common and widely used technique for producing bioactive hydrolysates, because it uses moderate operating conditions, with a certain specificity for the substrate. In the present study, the objective was to optimize and scale up the enzymatic hydrolysis of Eisenia foetida protein to obtain peptides with biological activity. The substrate characterization was carried out according to AOAC, a response surface design was performed for the optimization of the enzymatic hydrolysis and then the scaling was performed by means of dimensional analysis. The results show that the major component of the paste is protein, 65% of which is albumin, and the absence of pathogenic microorganisms was also found. Regarding optimization, it was found that the optimal hydrolysis conditions are achieved with pH = 8.5; temperature = 45 °C; amount of substrate = 125 g and volume of enzyme = 1245μL. For the scaling, 4 dimensionless pi-numbers were calculated which describe the process with no statistically significant differences between the model and the prototype; it can be concluded that the enzymatic hydrolysate of Eisenia foetida presents high values of antioxidant activity evaluated by different methodologies.

The calcium channel modulator 2-APB hydrolyzes in physiological buffers and acts as an effective radical scavenger and inhibitor of the NADPH oxidase 2

2-aminoethoxydiphenyl borate (2-APB) is commonly used as a tool to modulate calcium signaling in physiological studies. 2-APB has a complex pharmacology and acts as activator or inhibitor of a variety of Ca²⁺ channels and transporters. While unspecific, 2-APB is one of the most-used agents to modulate store-operated calcium entry (SOCE) mediated by the STIM-gated Orai channels. Due to its boron core structure, 2-APB tends to readily hydrolyze in aqueous environment, a property that results in a complex physicochemical behavior. Here, we quantified the degree of hydrolysis in physiological conditions and identified the hydrolysis products diphenylborinic acid and 2-aminoethanol by NMR. Notably, we detected a high sensitivity of 2-APB/diphenylborinic acid towards decomposition by hydrogen peroxide to compounds such as phenylboronic acid, phenol, and boric acid, which were, in contrast to 2-APB itself and diphenylborinic acid, insufficient to affect SOCE in physiological experiments. Consequently, the efficacy of 2-APB as a Ca²⁺ signal modulator strongly depends on the reactive oxygen species (ROS) production within the experimental system. The antioxidant behavior of 2-APB towards ROS and its resulting decomposition are inversely correlated to its potency to modulate Ca²⁺ signaling as shown by electron spin resonance spectroscopy (ESR) and Ca²⁺ imaging. Finally, we observed a strong inhibitory effect of 2-APB, i.e., its hydrolysis product diphenylborinic acid, on NADPH oxidase (NOX2) activity in human monocytes. These new 2-APB properties are highly relevant for Ca²⁺ and redox signaling studies and for pharmacological application of 2-APB and related boron compounds.

Abiotic transformation of synthetic progestins in representative soil mineral suspensions

Altrenogest (ALT), drospirenone (DRO), and melengestrol acetate (MLA) are three highly potent synthetic progestins that can be released into agricultural soils, while their fate in soil minerals remains unclear. This study explored the transformation of these progestins in MnO₂, SiO₂, and ferrihydrite suspensions and identified their transformation products (TPs) via high resolution mass spectrometry and density functional theory calculations. Transformations were only observed for DRO and MLA in SiO₂ suspension and ALT in MnO₂ suspension (half-lives = 0.86 min - 9.90 day). ALT transformation was facilitated at higher MnO₂ loadings, while DRO and MLA transformations were inhibited at higher SiO₂ loadings. These data indicated that hydrophobic partitioning interaction was dominant at higher SiO₂ loadings rather than specific interaction, which limited subsequent surface-catalyzed transformation. ALT transformation rate decreased with increasing pH because MnO₂ reduction requires proton participation. In contrast, relatively high pH facilitated MLA and DRO transformation, indicating that base-catalyzed hydrolysis occurred in SiO₂ suspension. The clustermap demonstrated the formation of abundant TPs. Lactone ring and acetoxy group hydrolysis was the major transformation pathway for DRO and MLA, with estimated yields of 57.7% and 173.2% at 6 day, respectively. ALT experienced C12 hydroxylation and formed the major TP 326g (yield of 15.4% at 8 hr). ALT also experienced allyl group oxidation and subsequent C5 hydroxylation, forming the major TP 344a (yield of 14.1% at 8 hr). This study demonstrates that TPs of metastable progestins are likely the main species in soils and that TP identification is a particular priority for risk assessment.

Strigolactones: diversity, perception, and hydrolysis

Strigolactones (SLs) are a unique and novel class of phytohormones that regulate numerous processes of growth and development in plants. Besides their endogenous functions as hormones, SLs are exuded by plant roots to stimulate critical interactions with symbiotic fungi but can also be exploited by parasitic plants to trigger their seed germination. In the past decade, since their discovery as phytohormones, rapid progress has been made in understanding the SL biosynthesis and signaling pathway. Of particular interest are the diversification of natural SLs and their exact mode of perception, selectivity, and hydrolysis by their dedicated receptors in plants. Here we provide an overview of the emerging field of SL perception with a focus on the diversity of canonical, non-canonical, and synthetic SL probes. Moreover, this review offers useful structural insights into SL perception, the precise molecular adaptations that define receptor-ligand specificities, and the mechanisms of SL hydrolysis and its attenuation by downstream signaling components.

Recovery of zinc and extraction of calcium and sulfur from zinc-rich gypsum residue by selective reduction roasting combined with hydrolysis

A novel process that includes selective reduction roasting followed by hydrolysis was proposed in this work to recover zinc, and efficiently extract calcium and sulfur from hazardous zinc-rich gypsum residue (ZGR) waste for high-purity of CaCO₃ and sulfur production. The selective reduction behaviors of ZGR during the reduction roasting were investigated in detail based on thermodynamic analysis and roasting experiments. The effect of roasting temperature, carbon dosage and time on the selective reduction of ZGR was comprehensively investigated, and the results indicated that ZnO and CaSO₄ in the ZGR can be selectively reduced to Zn(g) and CaS, respectively. The volatile Zn(g) was oxidized to ZnO and enriched in the dust, which can be used as a secondary zinc resource. Moreover, the hydrolysis behaviors and leaching kinetic of CaS during hydrolysis were studied intensively. Results depicted that in the H₂S-H₂O system, the CaS in the roasted product can be selectively and efficiently dissolved into the leachate. Furthermore, the kinetic analysis revealed that the hydrolysis of CaS conformed to the internal diffusion reaction control model in the shrinking core model and the apparent activation energy Ea = -12.02 kJ/mol. The obtained hydrolysate with low impurities could be used to capture CO₂ for the production of high-purity sulfur and CaCO₃. Iron and other impurities in the roasted product were concentrated into the leaching slag in the form of metallic iron and akermanite. The whole process realized the recovery of zinc, and the selective and effective extraction of calcium and sulfur, which could provide an alternative process for the large-scale treatment of these hazardous wastes.

A chemoenzymatic process for preparation of highly purified dehydroepiandrosterone in high space-time yield

Dehydroepiandrosterone (DHEA) is an important neurosteroid hormone to keep human hormonal balance and reproductive health. However, DHEA was always produced with impurities either by chemical or biological method and required high-cost purification before the medical use. To address this issue, a novel chemoenzymatic process was proposed and implemented to produce DHEA. An acetoxylated derivate of 4-androstene-3,17-dione (4-AD) was generated by chemical reaction and converted into DHEA by an enzyme cascade reaction combining a hydrolysis reaction with a reduction reaction. The hydrolysis reaction was catalyzed by a commercial esterase Z03 while the reduction reaction was catalyzed by E. coli cells co-expressing a 3β-hydroxysteroid dehydrogenase SfSDR and a glucose dehydrogenase BtGDH. After the condition optimization, DHEA was synthesized at a 100 mL scale under 100 mM of substrate loading and purified as white powder with the highest space-time yield (4.80 g/L/h) and purity (99 %) in the biosynthesis of DHEA. The successful attempt in this study provides a new approach for green synthesis of highly purified DHEA in the pharmaceutical industry.

Lipidomics analysis of Sanhuang chicken during cold storage reveals possible molecular mechanism of lipid changes

Lipidomic profiles changes of the Sanhuang chicken breast meat during cold storage (4 °C) were analyzed using ultra-high performance liquid chromatography coupled with mass spectrometry (UHPLC-MS)-based lipidomic analysis. Total lipids content decreased 16.8% after storage. Triacylglycerol (TAG), phosphatidylcholine (PC) and phosphatidylethanolamine (PE) significantly decreased, while lysophosphatidylcholine (LPC) and lysophosphatidylethanolamine (LPE) increased. Particularly, there was a trend that TAGs with fatty acids of 16:0 and 18:1, and phospholipids containing 18:1, 18:2 and 20:4 were more likely to be downregulated. The increase in the ratio of lysophospholipids/phospholipids and the degree of lipid oxidation demonstrated oxidation and enzymatic hydrolysis are potentially responsible for the lipid transformation. Moreover, 12 lipid species (P < 0.05, VIP > 1, FC < 0.8 or >1.25) were identified to be associated with the spoilage of meat. Glycerophospholipid metabolism and linoleic acid metabolism were the key metabolic pathways involved in the lipid transformations of chilled chicken.

Sulfite altered permanganate effects on acetate-enriched short-chain fatty acids production during sludge anaerobic fermentation

Anaerobic fermentation is a promising method for waste activated sludge (WAS) treatment, but ineffective solubilization and hydrolysis limit its application. The current study examined the function of sodium sulfite (SDS) in potassium permanganate (PP)-conditioned WAS fermentation for short-chain fatty acids (SCFAs) biosynthesis. The presence of SDS in the PP system (PP/SDS) reduced the positive effects of PP on total SCFAs yield (2755 versus 3471 mg COD/L), while effectively increasing the proportion of acetate (from 41 to 81 %). Not only did SDS decrease the promoting effects of PP on WAS solubilization and hydrolysis efficiency by 5-42 %, it also shifted microbial metabolic pathways to favor acetate production. In addition, the amino acid metabolism with acetate as end product was enhanced. Moreover, PP/SDS inhibited methanogenesis, resulting in an accumulation of acetate in high quantities. Thus, the current study a provided insight and direction for effective WAS treatment with acetate-enriched SCFAs production.

Photocatalytic investigation of textile dyes and E. coli bacteria from wastewater using Fe3O4@MnO2 heterojunction and investigation for hydrogen generation on NaBH4 hydrolysis

Various impurities found nowadays in water can be detrimental to human health. This work focused on utilizing Fe₃O₄@MnO₂ nanocomposite for cleaning organic contaminants from water, including rhodamine B (RhB) and Escherichia coli (E. coli). Analysis methods such as XRD, UV-vis, TEM, and FTIR were used to describe the nanocomposite. The results showed that the developed nanocomposite has good photocatalytic activity against pollutants in wastewater. The E. coli was destroyed after 90 min, and the RhB photodegradation rate was 75%. Moreover, the Fe₃O₄@MnO₂ efficiency as a catalyst for producing hydrogen as an alternative energy source was tested. According to the calculations, the nanomaterial's turnover frequency, activation energy, enthalpy, and entropy are 1061.3 h^-1, 28.93 kJ/mol, 26.38 kJ/mol, and -128.41 J/mol.K, respectively. Four reusability tests were completed, and the average reusability was 78%. The obtained data indicated the excellent potential for the developed Fe₃O₄@MnO₂ nanomaterial to act as an adsorbent, thus representing an alternative to the classical depollution methods. This study showed that nanoparticles have a photocatalytic effect against pathogenic bacteria and RhB azo dye in polluted waters and offer an effective catalytic activity to produce hydrogen as an alternative energy source.

Microbial β-glucanases: production, properties, and engineering

Lignocellulosic biomass, which mainly consists of cellulose and hemicellulose, is the most abundant renewable biopolymer on earth. β-Glucanases are glycoside hydrolases (GHs) that hydrolyze β-glucan, one of the dominant components of the plant cell wall, into cello-oligosaccharides and glucose. Among them, endo-β-1,4-glucanase (EC 3.2.1.4), exo-glucanase/cellobiohydrolase (EC 3.2.1.91), and β-glucosidase (EC 3.2.1.21) play critical roles in the digestion of glucan-like substrates. β-Glucanases have attracted considerable interest within the scientific community due to their applications in the feed, food, and textile industries. In the past decade, there has been considerable progress in the discovery, production, and characterization of novel β-glucanases. Advances in the development of next-generation sequencing techniques, including metagenomics and metatranscriptomics, have unveiled novel β-glucanases isolated from the gastrointestinal microbiota. The study of β-glucanases is beneficial for research and development of commercial products. In this study, we review the classification, properties, and engineering of β-glucanases.

Hydrolysis of dibutyl phthalate and di(2-ethylhexyl) phthalate in human liver, small intestine, kidney, and lung: An in vitro analysis using organ subcellular fractions and recombinant carboxylesterases

Phthalates are widely used plasticizers that are primarily and rapidly metabolized to monoester phthalates in mammals. In the present study, the hydrolysis of dibutyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP) in the human liver, small intestine, kidney, and lung was examined by the catalytic, kinetic, and inhibition analyses using organ microsomal and cytosolic fractions and recombinant carboxylesterases (CESs). The V_max (y-intercept) values based on the Eadie-Hofstee plots of DBP hydrolysis were liver > small intestine > kidney > lung in microsomes, and liver > small intestine > lung > kidney in cytosol, respectively. The CL_int values (x-intercept) were small intestine > liver > kidney > lung in both microsomes and cytosol. The V_max and CL_int or CL_max values of DEHP hydrolysis were small intestine > liver > kidney > lung in both microsomes and cytosol. Bis(4-nitrophenyl) phosphate (BNPP) effectively inhibited the activities of DBP and DEHP hydrolysis in the microsomes and cytosol of liver, small intestine, kidney, and lung. Although physostigmine also potently inhibited DBP and DEHP hydrolysis activities in both the microsomes and cytosol of the small intestine and kidney, the inhibitory effects in the liver and lung were weak. In recombinant CESs, the V_max values of DBP hydrolysis were CES1 (CES1b, CES1c) > CES2, whereas the CL_max values were CES2 > CES1 (CES1b, CES1c). On the other hand, the V_max and CL_max values of DEHP hydrolysis were CES2 > CES1 (CES1b, CES1c). These results suggest an extensive organ-dependence of DBP and DEHP hydrolysis due to CES expression, and that CESs are responsible for the metabolic activation of phthalates.

Radiolysis effect on Eu(III)-superplasticiser interactions in artificial cement and squeezed cement pore waters

In the framework of the French deep geological repository for radioactive waste, cement-based materials are envisaged to immobilize radionuclides and/or provide protection from radiation to the environment. Superplasticisers (SPs) are added to these materials to increase their workability. SPs will undergo degradation by coupled radiolytic and hydrolytic effects in the pore solution leading to the formation of potentially complexing degradation products. The objective was to study the potential effect of radiolyzed superplasticizers contained in cement-based materials on radionuclide uptake. The Eu speciation and solubility with organic ligands resulting from the degradation of SPs were studied for the two solutions and the results were compared. Two different SPs were selected, a polycarboxylate ether and a polynapthalene sulfonate. Two different protocols were followed: direct irradiation of the solution containing the superplasticizer, and irradiation of the compacted cement sample followed by extraction of the pore water. Solubility enhancements observed in artificial cement waters are not representative of real cement pore water interactions, in agreement with other studies. Finally, the effects of alkaline hydrolysis and radiolysis of SPs on Eu solubility in pore water are limited.

Drug Stability and Minimized Acid-/Drug-Catalyzed Phospholipid Degradation in Liposomal Irinotecan

Therapeutics at or close to the nanoscale, such as liposomal irinotecan, offer significant promise for the treatment of solid tumors. Their potential advantage over the unencapsulated or free form of the drug is due in part to their altered biodistribution. For slow and sustained release, significant optimization of formulation is needed to achieve the required level of stability and allow long-term storage of the drug product. Gradient-based liposomal formulation of camptothecins such as irinotecan poses unique challenges owing to the camptothecin- and acid-catalyzed hydrolysis of phospholipid esters in the inner monolayer of the liposomal membrane. We demonstrated that a narrow set of conditions related to the external pH, temperature, intraliposomal concentration, identity of the drug-trapping agent, physical form of the drug inside the liposomes, and final drug load have a marked impact on the stability of the liposome phospholipid membrane. The physical form of the drug inside the liposome was shown to be an insoluble gel with an irinotecan-to-sulfate ratio approximating 1:1, reducing the potential for irinotecan-catalyzed phospholipid hydrolysis in the internal phospholipid monolayer. As a result of this work, a stable and active liposome formulation has been developed that maintains phospholipid chemical stability following long-term storage at 2-8°C.

Crystal structure analysis of pyrrolidone carboxyl peptidase from Thermus thermophilus

Pyrrolidone carboxyl peptidase (PCP) hydrolytically removes the L-pyroglutamic acid from the amino terminal region of pyroglutamyl proteins or peptides. So far, only a limited number of structures of PCP have been solved. Here we report the crystal structure of pyrrolidone carboxyl peptidase from Thermus thermophilus (TtPCP) which has been solved using the molecular replacement method and refined at 1.9 Å resolution. TtPCP follows the α/β/α architecture in which the central β-sheets are surrounded by α-helices on both sides. The inter subunit contact between two monomers consists of two short antiparallel β-strands and part of a long protrusion loop. By comparing the TtPCP with its structural homologs, we identified the putative catalytic triad residues as Glu76, Cys139 and His160. A unique disulfide link found in some homologs of TtPCP, formed between two monomers that provide thermal stability to the protein, is not observed in TtPCP. Hence, being a thermophilic protein, the putative thermal stability of TtPCP could be due to more intra and inter-molecular hydrogen bonds, hydrophobic and ion pair interactions when compared with its mesophilic counterpart. The structural details of TtPCP will be helpful to understand the basis of the intrinsic stability of thermophilic proteins. Also, it could be useful for protein engineering.

Effect of air mixing on high-solids anaerobic digestion of cow manure: Performance and mechanism

This study aimed to further investigate the effect of air mixing on the performance of a high-solids anaerobic digestion system and reveal its underlying mechanisms via analyses of carbon conversion, microbial communities and key functional genes. When the air mixing intensity was 12.5, 37.5 and 62.5 mL/(L‧min), compared with the anaerobic digestion without air mixing, the methane yield was increased by 6 %, 13 % and 6 %, respectively. The improved performance was partly attributed to the increased hydrolysis rate of macromolecular substances by 5 %-16 % and carbon recovery in the form of methane by 6 %-7% compared with the controls. Functional flora (Magnetospirillum, Synergistaceae) and hydrolytic metabolism-related enzymes (cellulose, α-amylase) demonstrated higher abundance under air mixing condition, thus promoting the degradation of organic matter and methane production. This work provides some new insights into the use of air mixing to improve anaerobic digestion of high-solids waste.

Haloacetonitrile stability in cell culture media used in vitro toxicological studies

Haloacetonitriles (HANs) are an emerging class of nitrogenous disinfection by-products (DBPs) formed in disinfected drinking water and have been reported to be more cyto- and genotoxic than the regulated DBPs. HANs are also known to hydrolyze under neutral pH and normal room temperature. However, the stability of HANs has not been well characterized in DBP toxicological assessments. Most toxicological assessments expose DBPs up to several days which may result in a mixture of HANs and degradation products that might have underestimated HAN toxicity. In this study, HANs stability was characterized in 1) a buffer solution in sealed vials, 2) cell culture media (CCM) in sealed vials, and 3) CCM in 96 sealed well plates with 5% CO₂. Solutions were incubated at 37 °C for 3 days. MonoHANs were found to be stable in buffer and CCM except when HANs were incubated in CCM in plates where they could possibly be affected by volatilization and photodegradation during sample handling. However, di- and tri- HANs degraded between 70 and 100% in both buffer solution and CCM. They were also found to be less stable in CCM than in buffer solution possibly from HANs reacting with nucleophiles present in CCM (i.e., amino acids). Identified degradation products include corresponding haloacetamides and haloacetic acids for buffer solutions and only haloacetic acids and an unknown brominated compound for CCM. Results of this study suggests that reported toxicity values might have been underestimated and should consider changing CCM and DBP on a daily basis for a more accurate toxicity measurement.

Utility of a Systematic Approach to Selecting Candidate Prodrugs: A case Study using Candesartan Ester Analogues

Development of prodrugs is a useful strategy to overcome some disadvantages of candidate drugs. Recently, we established a systematic approach to selecting appropriate prodrugs, and validated the utility of this approach using oseltamivir analogues. In this study, the utility of the approach was further examined using candesartan cilexetil and 20 kinds of its analogues having various types of side chain as model compounds. Log D values of analogues (2.5 to 4.7) were higher than that of candesartan (1.0), their active metabolite, and the results were reasonable for the purpose of improving permeability of candesartan. The analogues tended to be more soluble in artificial intestinal fluids than in artificial gastric fluid, owing to their acidic physicochemical characteristics. Their membrane permeabilities were not correlated with log D values, which can be attributed to the metabolism in Caco-2 cells used in this system. In human hepatocytes and enterocytes, 11 out of the 20 analogues were immediately hydrolyzed to candesartan, and species differences were observed in the hydrolysis efficiency. This study confirmed the utility of the systematic approach for selection of appropriate prodrugs that could be proceeded to in vivo pharmacokinetics study, with selection of suitable experimental animals.

Assay of inorganic pyrophosphatase activity based on a fluorescence "turn-off" strategy using carbon quantum dots@Cu-MOF nanotubes

A highly sensitive and selective sensor for the quantitative assay of inorganic pyrophosphatase (PPase) activity was developed based on a fluorescence "turn-off" strategy. Carbon quantum dots@Cu(II)-based metal-organic framework nanotubes (CQDs@Cu-MOF) with length less than 300 nm and width less than 20 nm were synthesized. CQDs in the nanotubes exhibited weak fluorescence owing to static quenching. The coordination reaction between pyrophosphate ion (PPi) and Cu(II) decomposed CQDs@Cu-MOF and led to the release of CQDs, of which the fluorescence recovered. In the presence of PPase, the hydrolysis of PPi generated phosphate ion (Pi). CQDs@Cu-MOF remained their structural stability and the fluorescence turned off. The fluorescence intensity difference of the mixture of CQDs@Cu-MOF and PPi in the absence and presence of PPase (-ΔF) was proportional to the PPase concentration from 0.1 to 5 mU mL^-1 and that from 5 to 50 mU mL^-1, and a limit of detection at 0.03 mU mL^-1 was obtained. PPase activity in human serum was analyzed using the proposed fluorescence sensor and the recovery values were found to vary from 95.0% to 104 %.

Hydrolysis of lignocellulose to succinic acid: a review of treatment methods and succinic acid applications

Succinic acid (SA) is an intermediate product of the tricarboxylic acid cycle (TCA) and is one of the most significant platform chemicals for the production of various derivatives with high added value. Due to the depletion of fossil raw materials and the demand for eco-friendly energy sources, SA biosynthesis from renewable energy sources is gaining attention for its environmental friendliness. This review comprehensively analyzes strategies for the bioconversion of lignocellulose to SA based on the lignocellulose pretreatment processes and cellulose hydrolysis and fermentation principles and highlights the research progress on acid production and SA utilization under different microbial culture conditions. In addition, the fermentation efficiency of different microbial strains for the production of SA and the main challenges were analyzed. The future application directions of SA derivatives were pointed out. It is expected that this research will provide a reference for the optimization of SA production from lignocellulose.

Tannery waste as a renewable source of nitrogen for production of multicomponent fertilizers with biostimulating properties

The studies presented in this work show that solid tannery waste-like shavings can be used as high-protein materials for fertilizer production following the concept of the circular economy. To select appropriate process parameters (mass ratio of shavings meal to the hydrolyzing agent (S:L), hydrolysis medium concentration, temperature) and to ensure the highest possible hydrolysis efficiency, it is useful to apply the well-known response surface methodology (RSM). The analyses revealed that chromium shavings (SCr) were most preferably treated with 10% KOH in a ratio of S:L 1:1 with the process being carried out at 160 °C (6.59% N). The optimal hydrolysis conditions for non-chromium (S) shavings were: S:L ratio 1:2, 10% H₂SO₄, and temperature 160 °C (4.08% N). Chromium concentrations in hydrolysates from S and SCr shavings obtained under optimal conditions were 15.2 mg/kg and 9483 mg/kg, respectively. Hydrolysate samples were analyzed by reversed-phase high-pressure liquid chromatography (RP-HPLC) that revealed that the type of hydrolysis (acidic/alkaline) affects the amino acid profile. Approximately 4.5 times more amino acids were extracted in the KOH environment than during acidic treatment. The hydrolysates contained mainly glycine, alanine, and proline, which are primarily responsible for stimulating plant growth by supporting chlorophyll synthesis, chelating micronutrients, improving pollen fertility, or resistance to low temperatures. The conversion of tannery waste into fertilizer requires the control of contaminant levels, especially chromium, which can oxidize to the carcinogenic form Cr(VI) that is hazardous to humans and the environment.

Enhanced mesophilic fermentation of waste activated sludge by integration with in-situ nitrate reduction

This study investigated the reduction of nitrate in a mesophilic waste activated sludge (WAS) fermentation system and determined the effect of nitrate reduction on the hydrolysis, acidogenesis and acetogenesis. Experimental results showed that the initial nitrate concentrations of 100, 200 and 400 mg/L were completely reduced in 1, 2 and 7 days, respectively. The destruction of volatile suspended solids was 1.2, 1.8 and 2.8 times, respectively, that without nitrate, demonstrating nitrate promoted the release of organic matter in sludge and enhanced the biodegradability of sludge organics. Moreover, batch tests using model substrates illustrated nitrate reduction promoted sludge hydrolysis and acetogenesis, but slightly inhibited acidogenesis. This study offers a feasible method to address two major problems currently faced by biological wastewater treatment plants, i.e. the overabundance of WAS and the lack of carbon sources for the denitrification process.

Effects of ultrasound assisted cell wall disruption on physicochemical properties of camellia bee pollen protein isolates

Camellia bee pollen protein isolates were extracted by cell wall disruption using ultrasonication, freeze-thawing, enzymatic hydrolysis, and their combinations. The effects of these methods on microstructure of cell wall, protein release, protein yield, physiochemical properties and structure of proteins were investigated. As compared with physical treatments (ultrasonication, freeze-thawing and their combination), the enzymatic hydrolysis significantly improved the yield of proteins, because it not only promoted the release of proteins from the inside of pollen, but also released proteins in pollen wall. The proteins extracted by enzymatic hydrolysis method also exhibited better solubility, emulsifying and gelation properties due to the partial hydrolysis of proteins by protease. In addition, when ultrasound was combined with freeze-thawing or enzymatic hydrolysis, it could further improve the yield of proteins and the functional properties of proteins, which was mainly related to the changes of protein structure induced by cavitation effect of ultrasound.

Dissolvable polymeric microneedles loaded with aspirin for antiplatelet aggregation

To reduce mucosal damage in the gastrointestinal tract caused by aspirin, we developed a dissolvable polymeric microneedle (MN) patch loaded with aspirin. Biodegradable polymers provide mechanical strength to the MNs. The MN tips punctured the cuticle of the skin and dissolved when in contact with the subcutaneous tissue. The aspirin in the MN patch is delivered continuously through an array of micropores created by the punctures, providing a stable plasma concentration of aspirin. The factors affecting the stability of aspirin during MNs fabrication were comprehensively analyzed, and the hydrolysis rate of aspirin in the MNs was less than 2%. Compared to oral administration, MN administration not only had a smoother plasma concentration curve but also resulted in a lower effective dose of antiplatelet aggregation. Aspirin-loaded MNs were mildly irritating to the skin, causing only slight erythema on the skin and recovery within 24 h. In summary, aspirin-loaded MNs provide a new method to reduce gastrointestinal adverse effects in patients requiring aspirin regularly.

Enzymes and enzymatic mechanisms in enzymatic degradation of lignocellulosic biomass: A mini-review

Enzymatic hydrolysis is the key step limiting the efficiency of the biorefinery of lignocellulosic biomass. Enzymes involved in enzymatic hydrolysis and their interactions with biomass should be comprehended to form the basis for looking for strategies to improve process efficiency. This article updates the contemporary research on the properties of key enzymes in the lignocellulose biorefinery and their interactions with biomass, adsorption, and hydrolysis. The advanced analytical techniques to track the interactions for exploiting mechanisms are discussed. The challenges and prospects for future research are outlined.

Fast screening method to determine metabolites of nitrofurans in chicken meat using partitioned dispersive liquid-liquid microextraction combined with HPLC/DAD

Methods have been developed for the hydrolysis and derivatisation of protein-bound metabolites of nitrofurans and for the extraction of 2-nitrobenzaldehyde derivatives of the metabolites from chicken meat. In this work, the time needed for hydrolysis and derivatisation was reduced from the conventional 16 h to 90 min. Based on partitioned dispersed liquid-liquid microextraction, a method for extracting 2-nitrobenzaldehyde derivatives of metabolites from crude chicken meat has been developed. Under the optimised experimental conditions, enrichment factors (EFs) ranging from 92.8 to 208.9 were obtained. The method was linear over the range of 10-600 µg kg^-1 with determination coefficients (r²) between 0.9979 and 0.9996. Intraday and interday repeatability expressed as a percentage RSD, ranged from 2.2% to 11.2%, and 2.7% to 12.4%, respectively. LOD of 1.07-2.25 µg kg^-1 and LOQ of 3.09-6.2 µg kg^-1 were obtained. The proposed method was applied in the analysis of metabolites of nitrofurans in chicken meat obtained from farmers using them for their domestic consumption and proved free of the analytes. A recovery of 85.2-109.4% with a %RSD ranging between 3.4% and 13.7% was obtained at three spiking levels. The proposed method was successfully further applied for the analysis of target analytes in chicken meat samples purchased from different supermarkets around Roodeport, Gauteng (South Africa). There was no target analyte detected in the analysed samples. Therefore, the developed methods can be used for monitoring the corresponding metabolites of nitrofurans in chicken meat.

Growing of fungi on the stored low denatured defatted soybean meals and the hydrolysis of proteins and isoflavone glycosides by fungal enzymes

Recently, more and more attention has been paid to the effects of fungal contamination and fungal enzymes secreted in raw grain on product quality. As the starting material of protein and active components, the quality of low denatured defatted soybean meals (LDSM) directly determines the qualities of subsequent products. In previous studies, we have revealed that infection with Aspergillus ochraceus protease causes significant hydrolysis of proteins. In this study, growing of fungi on the stored low denatured defatted soybean meals (LDSM) was analyzed by high-throughput sequencing and real-time PCR, which revealed that the abundance of Aspergillus increased significantly after storage. Twenty fungal proteases and 9 fungal glucosidases were found in stored LDSM and zymography showed that the proteases were of serine-type with some cysteine and aspartic activities. Proteolysis of the soybean storage proteins mainly occurred after the hydration of LDSM and the average molecular weight of soy proteins decreased from 57.9 kDa to 30.7 kDa after 60 min's of hydrolysis. Two-dimensional electrophoresis (2-DE) analysis found the polypeptide fragments from soybean 7S and 11S proteins with molecular weight around 10-25 kDa in the hydrated LDSM. Glycosylated isoflavones were hydrolyzed in both dry and hydrated stored LDSM which resulted in significant (p < 0.05) increase in the contents of isoflavone aglycones. This study suggested that fungi contamination be a new factor affecting the properties of LDSM derived soy protein products.

Prospects of thermotolerant Kluyveromyces marxianus for high solids ethanol fermentation of lignocellulosic biomass

Simultaneous saccharification and fermentation (SSF) is effective for minimizing sugar inhibition during high solids fermentation of biomass solids to ethanol. However, fungal enzymes used during SSF are optimal between 50 and 60 °C, whereas most fermentative yeast, such as Saccharomyces cerevisiae, do not tolerate temperatures above 37 °C. Kluyveromyces marxianus variant CBS 6556 is a thermotolerant eukaryote that thrives at 43 °C, thus potentially serving as a promising new host for SSF operation in biorefineries. Here, we attempt to leverage the thermotolerance of the strain to demonstrate the application of CBS 6556 in a high solids (up to 20 wt% insoluble solid loading) SSF configuration to understand its capabilities and limitations as compared to a proven SSF strain, S. cerevisiae D5A. For this study, we first pretreated hardwood poplar chips using Co-Solvent Enhanced Lignocellulosic Fractionation (CELF) to remove lignin and hemicellulose and to produce cellulose-enriched pretreated solids for SSF. Our results demonstrate that although CBS 6556 could not directly outperform D5A, it demonstrated similar tolerance to high gravity sugar solutions, superior growth rates at higher temperatures and higher early stage ethanol productivity. We discovered that CBS 6556's membrane was particularly sensitive to higher ethanol concentrations causing it to suffer earlier fermentation arrest than D5A. Cross-examination of metabolite data between CBS 6556 and D5A and cell surface imaging suggests that the combined stresses of high ethanol concentrations and temperature to CBS 6556's cell membrane was a primary factor limiting its ethanol productivity. Hence, we believe K. marxianus to be an excellent host for future genetic engineering efforts to improve membrane robustness especially at high temperatures in order to achieve higher ethanol productivity and titers, serving as a viable alternative to D5A.

Substrate concentration: A more serious consideration than the amount of 5-hydroxymethylfurfural in acid-catalyzed hydrolysis during bioethanol production from starch biomass

5-hydroxymethylfurfural (5-HMF) yield during bioethanol production from starch was determined using spectrophotometry and chromatography. Increasing acid concentration and time favored 5-HMF production with HCl while yield decreased after 45-minute hydrolysis time for HNO₃ and H₂SO₄ hydrolyzed samples. Impacts of glucose (substrate) concentration and produced 5-HMF on bioethanol yield were studied with different sulphuric acid concentrations and different α-amylase and amyloglucosidase activities. A central composite rotational design was utilized to determine the conditions of hydrolysis for optimum glucose production. The results showed that maximum glucose yield occurred at 0.5 M acid concentration and 45-minute hydrolysis time, while maximum yield was achieved at 120 and 280 units of α-amylase and amyloglucosidase activities respectively. It was shown that 5-HMF did not exhibit much inhibition on ethanol yield at low acid concentrations but became pronounced at higher acid concentrations, while high glucose concentrations had a pronounced negative effect on ethanol yield and fermentation efficiency.

Enhancing resource recovery via cranberry syrup waste at the Wisconsin Rapids WRRF: An experimental and modeling study

The Wisconsin Rapids Wastewater Treatment Plant (WRWWTP) is faced with a more stringent effluent phosphorus requirement that will drive capital investment between 2020 and 2025. The facility will need to achieve a monthly average value of 0.36 mg L^-1 of total phosphorus (TP). While the facility has sufficient influent carbon to drive a conventional enhanced biological phosphorus removal (EBPR) configuration, the existing infrastructure makes the addition of influent selector zones cost prohibitive. Underutilized aeration basin capacity was repurposed for testing return activated sludge (RAS) fermentation. The WRWWTP began pilot testing of RAS fermentation in April 2021. The facility moved through a series of operational setpoints to optimize phosphorus removal in a sidestream RAS (SSR) configuration, including RAS diversion, decrease of DO in aeration basins and chemical dosing shutoff. One of the key implementations was the addition of cranberry syrup waste to provide additional carbon for RAS fermentation, converting the process to a SSR plus carbon (SSRC) configuration. By the end of the testing period, effluent total phosphorus was averaging less than 0.4 mg L^-1 with no chemical addition. A model was developed in the SUMO platform and was used to capture orthophosphate trends during the testing period. The model investigated microbial population dynamics and found that the operational changes including RAS diversion, chemical dosing shutoff and cranberry syrup waste addition impacted the enrichment of phosphorus accumulating organisms (PAO). After performing a sensitivity analysis on hydrolysis parameters, the predicted hydrolysis rate around 1.8-1.9 mg COD g VSS^-1 hr^-1 was found to match the batch rate testing data. This is the first study where cranberry syrup waste was used to successfully enhance EBPR performance, resulting in 90% TP removal. While further research is needed regarding the composition of the waste matrix and the microbial community composition, this expands the routes for resource recovery in the field of wastewater treatment.

Salivary esterases dramatically reduce biostability of dentin collagen treated with galloylated polyphenols

OBJECTIVE

To investigate the effects of salivary esterases on biostability of collagen treated by galloylated polyphenols.

METHODS

Human dentin was microtomed into 6-μm-thick films, which were demineralized and treated for 60 s using solutions containing 0.6% and 2% of one of the crosslinkers: tannic acid (TAC), epigallocatechin gallate (EGCG), epigallocatechin (EGC), and N-[3-dimethylaminopropyl]-N'-ethylcarbodiimide hydrochloride (EDC)/N-hydroxysuccinimide (NHS), and for 1 h using EDC/NHS. Half of the treated and untreated (control) films were subjected to human saliva incubation. Collagen biostability was assessed via exogenous protease biodegradation by weight loss and hydroxyproline release, and endogenous MMPs by in situ zymography. The degradation products of galloylated polyphenols (TAC and EGCG) by saliva were monitored using proton nuclear magnetic resonance (1H NMR) and gel permeation chromatography (GPC). The esterase activity of saliva induced by the crosslinkers was also assessed.

RESULTS

Collagen films treated with TAC and EGCG exhibited significantly improved biostability (p < 0.05); however, the enhanced biostability was severely reduced after saliva incubation (p < 0.001). For EDC/NHS treated collagen, saliva incubation showed negligible effect on the biostability. 1H NMR studies confirmed the esterase-catalyzed hydrolysis of the galloyl. GPC measurements showed decreased molecular weight of TAC in saliva indicating its chemical degradation. Both TAC and EGCG showed much higher esterase activity than other treatment groups.

SIGNIFICANCE

The galloyl group plays important role in collagen crosslinking, inducing higher biostability. However, galloylated polyphenols crosslinked on collagen are highly susceptible to metabolism of human saliva by salivary esterase, dramatically compromising the enhanced biostability.

Enhanced biohydrogen generation through calcium peroxide engendered efficient ultrasonic disintegration of waste activated sludge in low temperature environment

Waste activated sludge is a renewable source for biohydrogen production, whereas the presence of complex biopolymers limits the hydrolysis step during this process, and thus pretreatment is required to disintegrate the sludge biomass. In this study, the feasibility of utilizing waste activated sludge to produce biohydrogen by improving the solubilization by means of thermo CaO₂ engendered sonication disintegration (TCP-US) was studied. The optimized condition for extracellular polymeric substance (EPS) dissociation was obtained at the CaO₂ dosage of 0.05 g/g SS at 70 °C. The maximum disintegration after EPS removal was achieved at the sonic specific energy input of 1612.8 kJ/kg TS with the maximum solubilization and SS reduction of 23.7% and 18.14%, respectively, which was higher than the US alone pretreatment. Thus, this solubilization yields higher biohydrogen production of 114.3 mLH₂/gCOD in TCP-US sample.

Passivation and Interlayer Effect of Zr(i-PrO)4 on Green CuGaS2/ZnS/Zr(i-PrO)4@Al2O3 and Red CuInS2/ZnS/Zr(i-PrO)4@Al2O3 QD Hybrid Powders

Broadband emissive I-III-VI quantum dots (QDs) are synthesized as efficient and stable I-III-VI QDs to be used as eco-friendly luminescent materials in various applications. Here, we introduce the additional passivation of zirconium isopropoxide (Zr(i-PrO)₄) to improve the optical properties and environmental stability of green-emitting CuGaS₂/ZnS (G-CGS/ZnS) and red-emitting CuInS₂/ZnS (R-CIS/ZnS) QDs. The photoluminescence quantum yield (PLQY) of both resultant Zr(i-PrO)₄-coated G-CGS/ZnS and R-CIS/ZnS QDs reaches similar values of ~ 95%. In addition, the photostability and thermal-stability of G-CGS/ZnS/Zr(i-PrO)₄ and R-CIS/ZnS/Zr(i-PrO)₄ QDs are improved by reducing the ligand loss via encapsulation of the ligand-coated QD surface with Zr(i-PrO)₄. It is also proved that the Zr(i-PrO)₄-passivated interlayer mitigates the further degradation of I-III-V QDs from ligand loss even under harsh conditions during additional hydrolysis reaction of aluminum tri-sec-butoxide (Al(sec-BuO)₃), forming easy-to-handle G-CGS/ZnS and R-CIS/ZnS QD-embedded Al₂O₃ powders. Therefore, the introduction of a Zr(i-PrO)₄ complex layer potentially provides a strong interlayer to mitigate degradation of I-III-VI QD-embedded Al₂O₃ hybrid powders as well as passivation layer for protecting I-III-VI QD.

Hydrolysis of norfloxacin in the hyporheic zone: kinetics and pathways

Understanding the hydrolysis behavior and pathway of norfloxacin (NOR) in the hyporheic zone (HZ) is important for predicting its environmental persistence. Therefore, the effects of different environmental factors on NOR hydrolysis were investigated, and the hydrolysis pathway of NOR in the HZ was determined by DFT calculations and UPLC/TOF-MS. The hydrolysis process of NOR was consistent with the first-order kinetic. The experiment of environmental factors showed that DO was an important factor to affect NOR hydrolysis, and its hydrolysis rate was positively correlated with DO concentration. The superoxide radical (·O2-) was the main active species for NOR hydrolysis. The hydrolysis rates of NOR under neutral and alkaline conditions were higher than that under acidic conditions in both aerobic and anoxic environments. The ions of Ca2+, Mg2+, HCO3-, CO32-, and NO3- in simulated water samples inhibited the hydrolysis of NOR, while Cl- promoted its hydrolysis. In addition, the electronegativity of NOR was determined by DFT calculations, and it was speculated that the active sites of NOR hydrolysis were mainly located in the piperazine ring and quinolone ring. The main hydrolysis pathway of NOR in aerobic environment was piperazine ring cracking and quinolone ring decomposition, and that in anoxic environment was piperazine ring cracking. The results are of great significance to evaluate the environmental fate of NOR in the HZ and provide a theoretical basis for further understanding the degradation and governance of fluoroquinolones in water environment.

Development and validation of a TaqMan® probe- based real-time PCR assay for detection of Ehrlichia canis

Ehrlichiosis is a potentially fatal zoonotic tick-borne disease, caused by a pleomorphic Gram-negative bacterium. It occurs worldwide and affects humans, domestic and wild animals. Dogs infected with Ehrlichia canis develop canine monocytic ehrlichiosis (CME), a significant infectious disease of canines. TaqMan® based real-time PCR assays to detect Ehrlichia spp. affecting dogs were developed and a real-time PCR assay specific for E. canis validated. The efficiency of the assay was 93% and the 95% limit of detection was 33 E. canis plasmid copies/µl of blood (95% confidence interval: 23 - 58). The assay was specific for E. canis when tested against other haemoparasites. Consistent repeatability was observed, with an inter-run standard deviation (SD) range between 0.33 and 1.29 and an intra-run SD range between 0.04 and 1.14. Field samples were tested in parallel by both the E. canis real-time PCR assay and a reverse line blot hybridization assay. The results were in agreement for the two assays, with an exception of two out of 121 samples. Bayesian latent class analysis was used to calculate a diagnostic sensitivity of the E. canis real-time PCR assay of 90% and a specificity of 92%. This assay is a sensitive and reliable molecular detection method for E. canis and will be a useful tool for early diagnosis and timely treatment for this haemoparasite.

Hydrolytic activity of new bioinspired MnIIIMnII and FeIIIMnII complexes as mimetics of PAPs: Biological and environmental interest

Coordination compounds that mimic Purple Acid Phosphatases (PAPs) have drawn attention in the bioinorganic field due to their capacity to cleave phosphodiester bonds. However, their catalytic activity upon phosphate triesters is still unexplored. Thus, we report the synthesis and characterization of two binuclear complexes, [Mn^IIMn^III(L₁)(OAc)₂]BF₄ (1) and [Mn^IIFe^III(L₁)(OAc)₂]BF₄ (2) (H₂L₁ = 2-[N,N-bis-(2- pyridilmethyl)aminomethyl]-4-methyl-6-[N-(2-hydroxy-3-formyl-5-methylbenzyl)-N-(2-pyridylmethyl)aminomethyl]phenol), their hydrolytic activity and antioxidant potential. The complexes were fully characterized, including the X-Ray diffraction (XRD) of 1. Density functional theory (DFT) calculations were performed to better understand their electronic and structural properties and phosphate conjugates. The catalytic activity was analyzed for two model substrates, a diester (BDNPP) and a triester phosphate (DEDNPP). The results suggest enhancement of the hydrolysis reaction by 170 to 1500 times, depending on the substrate and complex. It was possible to accompany the catalytic reaction of DEDNPP hydrolysis by phosphorus nuclear magnetic resonance (³¹P NMR), showing that both 1 and 2 are efficient catalysts. Moreover, we also addressed that 1 and 2 present a relevant antioxidant potential, protecting the yeast Saccharomyces cerevisiae, used as eukaryotic model of study, against the exposure of cells to acute oxidative stress.

Effects of hawthorn addition on the physicochemical properties and hydrolysis of corn starch

Hawthorn powder were mixed with corn starch and heated in water to make corn starch-hawthorn mixtures (CS-Haw) and then the physicochemical properties and hydrolysis characteristics of the mixtures were measured. Results showed that the addition of hawthorn powder decreased the viscosity of corn starch, and prolonged the pasting temperature, while the microstructure analysis indicated that hawthorn particles aggregated on the surfaces of starch granules, reducing the chance of starch contacting with water, then delayed the starch gelatinization. The presence of hawthorn powder also reduced the G' value to varying degrees and the loss tangent of CS-Haw was significantly higher than that of corn starch. The addition of hawthorn powder in large amounts also increased the rapidly digestible starch, while decrease the slowly digestible starch and resistant starch. The present research will provide basic theoretical support for the application of hawthorn in healthy starch food processing.

Acidogenic fermentation of food waste in a leachate bed reactor (LBR) at high volumetric organic Loading: Effect of granular activated carbon (GAC) and sequential enrichment of inoculum

This study investigated the impact of different granular activated carbon (GAC) loadings and inoculum enrichment on acidogenic fermentation of food waste in a leachate bed reactor (LBR) operated at a high volumetric organic loading of 49 g VS/L_reactor. LBR with a high GAC loading of 0.51 g GAC/g VS_{food waste} achieved hydrolysis yield of 620 g SCOD/kg VS_added, significantly (P ≤ 0.05) higher to that obtained for LBRs with low or no GAC loading. A high GAC loading also resulted in a higher acidification yield of 507 g COD_SCFA/kg VS_added. Butyrate dominated the short-chain fatty acid (SCFA) composition by constituting 57-60 % of total SCFA at high GAC loadings, while the composition of acetate (38-40 %) and butyrate (36-38 %) were similar at lower GAC loadings. Inoculum enrichment further improved the hydrolysis and acidogenesis yields by 10-22 % resulting in the final hydrolysis yield of 683 g SCOD/kg VS_added and acidification yield of 617 g COD_SCFA/kg VS_added.