Helmholtz Resonator Applied to Nanocrystal-Based Infrared Sensing

While the integration of nanocrystals as an active medium for optoelectronic devices progresses, light management strategies are becoming required. Over recent years, several photonic structures (plasmons, cavities, mirrors, etc.) have been coupled to nanocrystal films to shape the absorption spectrum, tune the directionality, and so on. Here, we explore a photonic equivalent of the acoustic Helmholtz resonator and propose a design that can easily be fabricated. This geometry combines a strong electromagnetic field magnification and a narrow channel width compatible with efficient charge conduction despite hopping conduction. At 80 K, the device reaches a responsivity above 1 A·W^-1 and a detectivity above 10¹¹ Jones (3 μm cutoff) while offering a significantly faster time-response than vertical geometry diodes.

Quantum Confined High-Entropy Lanthanide Oxysulfide Colloidal Nanocrystals

We have synthesized the first reported example of quantum confined high-entropy (HE) nanoparticles, using the lanthanide oxysulfide, Ln2SO2, system as the host phase for an equimolar mixture of Pr, Nd, Gd, Dy, and Er. A uniform HE phase was achieved via the simultaneous thermolysis of a mixture of lanthanide dithiocarbamate precursors in solution. This was confirmed by powder X-ray diffraction and high-resolution scanning transmission electron microscopy, with energy dispersive X-ray spectroscopic mapping confirming the uniform distribution of the lanthanides throughout the particles. The nanoparticle dispersion displayed a significant blue shift in the absorption and photoluminescence spectra relative to our previously reported bulk sample with the same composition, with an absorption edge at 330 nm and a λmax at 410 nm compared to the absorption edge at 500 nm and a λmax at 450 nm in the bulk, which is indicative of quantum confinement. We support this postulate with experimental and theoretical analysis of the bandgap energy as a function of strain and surface effects (ligand binding) as well as calculation of the exciton Bohr radiii of the end member compounds.

Cd3P2/Zn3P2 Core-Shell Nanocrystals: Synthesis and Optical Properties

II-V semiconductor nanocrystals such as Cd₃P₂ and Zn₃P₂ have enormous potential as materials in next-generation optoelectronic devices requiring active optical properties across the visible and infrared range. To date, this potential has been unfulfilled due to their inherent instability with respect to air and moisture. Core-shell system Cd₃P₂/Zn₃P₂ is synthesized and studied from structural (morphology, crystallinity, shell diameter), chemical (composition of core, shell, and ligand sphere), and optical perspectives (absorbance, emission-steady state and time resolved, quantum yield, and air stability). The improvements achieved by coating with Zn₃P₂ are likely due to its identical crystal structure to Cd₃P₂ (tetragonal), highlighting the key role crystallographic concerns play in creating cutting edge core-shell NCs.

Color-Switchable Nanosilicon Fluorescent Probes

Fluorescent probes are vital to cell imaging by allowing specific parts of cells to be visualized and quantified. Color-switchable probes (CSPs), with tunable emission wavelength upon contact with specific targets, are particularly powerful because they not only eliminate the need to wash away all unbound probe but also allow for internal controls of probe concentrations, thereby facilitating quantification. Several such CSPs exist and have proven very useful, but not for all key cellular targets. Here we report a pioneering CSP for in situ cell imaging using aldehyde-functionalized silicon nanocrystals (SiNCs) that switch their intrinsic photoluminescence from red to blue quickly when interacting with amino acids in live cells. Though conventional probes often work better in cell-free extracts than in live cells, the SiNCs display the opposite behavior and function well and fast in universal cell lines at 37 °C while requiring much higher temperature in extracts. Furthermore, the SiNCs only disperse in cytoplasm not nucleus, and their fluorescence intensity correlated linearly with the concentration of fed amino acids. We believe these nanosilicon probes will be promising tools to visualize distribution of amino acids and potentially quantify amino acid related processes in live cells.

The Formation Mechanism of Nanocrystals after Martensitic Transformation

Understanding the ultrafine substructure in freshly formed Fe-C martensite is the key point to reveal the real martensitic transformation mechanism. As-quenched martensite, whose transformation temperature is close to room temperature, has been investigated in detail by means of transmission electron microscopy (TEM) in this study. The observation results revealed that the freshly formed martensite after quenching is actually composed of ultrafine crystallites with a grain size of 1−2 nm. The present observation result matches well with the suggestion based on X-ray studies carried out one hundred years ago. Such nanocrystals are distributed throughout the entire martensite. The whole martensite shows a uniform contrast under both bright and dark field observation modes, irrespective of what observation directions are chosen. No defect contrast can be observed inside each nanocrystal. However, a body-centered cubic {112}<111>-type twinning relationship exists among the ultrafine α-Fe grains. Such ultrafine α-Fe grains or crystallites are the root cause of the fine microstructure formed in martensitic steels and high hardness after martensitic transformation. The formation mechanism of the ultrafine α-Fe grains in the freshly formed martensite will be discussed based on a new γ → α phase transformation mechanism.

Efficient Nanocrystal Photovoltaics with PTAA as Hole Transport Layer

The power conversion efficiency (PCE) of solution-processed CdTe nanocrystals (NCs) solar cells has been significantly promoted in recent years due to the optimization of device design by advanced interface engineering techniques. However, further development of CdTe NC solar cells is still limited by the low open-circuit voltage (V_oc) (mostly in range of 0.5-0.7 V), which is mainly attributed to the charge recombination at the CdTe/electrode interface. Herein, we demonstrate a high-efficiency CdTe NCs solar cell by using organic polymer poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA) as the hole transport layer (HTL) to decrease the interface recombination and enhance the V_oc. The solar cell with the architecture of ITO/ZnO/CdS/CdSe/CdTe/PTAA/Au was fabricated via a layer-by-layer solution process. Experimental results show that PTAA offers better back contact for reducing interface resistance than the device without HTL. It is found that a dipole layer is produced between the CdTe NC thin film and the back contact electrode; thus the built-in electric field (V_bi) is reinforced, allowing more efficient carrier separation. By introducing the PTAA HTL in the device, the open-circuit voltage, short-circuit current density and the fill factor are simultaneously improved, leading to a high PCE of 6.95%, which is increased by 30% compared to that of the control device without HTL (5.3%). This work suggests that the widely used PTAA is preferred as the excellent HTL for achieving highly efficient CdTe NC solar cells.

Application of perovskites in bioimaging: the state-of-the-art and future developments

BACKGROUND

Recently, the development of perovskite-based nanocrystals for sustainable applications in bioimaging and clinical diagnostics have become a very active area of research. From 2D hybrid to zero-dimensional quantum dots (QDs), perovskites along with a variety of characteristic features, specifically non-linear optoelectronics properties, have attracted enormous research attention. These characteristics can be tuned by the type of cations or anions and their ratio used in host perovskites. Carrier doping and chemical modifications are additional alternatives to control optical and magnetism in radiodiagnostics.

AREA COVERED

This review begins by explaining the physical phenomena associated with luminescence or optical features of novel perovskites in diagnostic applications. Moreover, reported oxide, halide, doped, and QDs-based nanoprobes were elaborated. At last, the need for novel perovskite development, for example, persistent luminescent and low cytotoxicity is discussed, and the futuristic perspective of perovskites in clinical diagnostics with real-time demonstration is explained.

EXPERT OPINION

Our article concludes that hybrid perovskites, including metal-free, core-shell nanocomposites-based, and alloy-based perovskites, exhibit tunable bandgap and high photoluminescence quantum yields which ultimately result in high optical features. However, given limited understanding of ion transport mechanisms and dependency on environmental conditions of the perovskites, more research is needed.

Superionic Conduction in One-Dimensional Nanostructures

Nanostructuring has become a powerful tool for tuning the electronic properties of materials and enhancing transport. As an example of relevance to next-generation battery technologies, nanocrystals have shown promise for realizing fast-ion conduction in solids; however, dissipationless ion transport over extended length scales is hindered by lossy interfaces formed between nanocrystals in a solid. Here we address this challenge by exploiting one-dimensional nanostructures for ion transport. Superionic conduction, with a record-high ionic conductivity of ∼4 S/cm at 150 °C, is demonstrated in solid electrolytes fabricated from nanowires of the earth-abundant solid copper selenide. This quasi-one-dimensional ionic conductivity is ∼5× higher than that in bulk cuprous selenide. Nanoscale dimensions in the radial direction lower ion-hopping barriers, while mesoscopically long, interface-free transport paths are available for ion transport in the axial direction. One-dimensional nanostructures can exceptionally boost solid-state devices that rely on ion transport.

Crystal Structure and Optical Properties of ZnO:Ce Nano Film

ZnO and cerium-doped ZnO on a glass substrate have been prepared by the sol–gel method using the spin coating technique and water bath growth process. Ce-doping concentration on film structure, morphology, and optical properties is investigated. The result indicated that the hexagonal wurtzite ZnO with high crystalline quality formed on the substrate. The crystal parameters a and c decreased, crystal size increased, and the compressive strain formed after Ce-doping. Formed un-, 3%, 6%, 12% Ce-doped ZnO film has a spherical shape with a size between 8.6–31, 14–52, 18–56, and 20–91 nm, respectively. All films had good absorption of 300–400 nm ultraviolet light, in particular, the absorption of near ultraviolet (370–400 nm) increased after doping of Ce. The transmittance of light between 400–800 nm decreased with Ce-doping concentration. The band gap energy increased after Ce-doping reaching better optical behavior for preparing ZnO heterostructured thin-film. All film emitted intense blue emission under 375 nm excitation at room temperature. This indicated the film can have application in optoelectronic devices.

Cs4CuSb2Cl12-xIx(x = 0-10) nanocrystals for visible light photodetection

Lead-free layered double perovskite nanocrystals (NCs) with tunable visible range emission, high carrier mobility and low trap density are the need of the hour to make them applicable for optoelectronic and photovoltaic devices. Introduction of Cu²⁺in the high band gap Cs₃Sb₂Cl₉lattice transforms it to the monoclinic Cs₄CuSb₂Cl₁₂(CCSC) NCs having a direct band gap of 1.96 eV. The replacement of 50% Cl^-by I^-ions generates <5 nm Cs₄CuSb₂Cl₆I₆(C6I6) monodispersed NCs with an unchanged crystal system but with further lowering of the band gap to 1.92 eV. Thep-type C6I6 NCs exhibit emission spectra, lower trap density, appreciable hole mobility and most importantly a lower exciton binding energy of only 50.8 ± 1.3 meV. The temperature dependent photoluminescence (PL) spectra of the C6I6 NCs show a decrease in non-radiative recombination from 300 K down to 78 K. When applied as the photoactive layer in out-of-plane photodetector devices, C6I6 NC devices exhibit an appreciable responsivity of 0.67 A W^-1at 5 V, detectivity of 4.55 × 10⁸Jones (2.5 V), and fast photoresponse with rise and fall time of 126 and 94 ms, respectively. On the other hand, higher I^-substitution in Cs₄CuSb₂Cl₂I₁₀NCs (C2I10) degrades the lattice into a mixture of monoclinic and trigonal crystal phases, which also lowers the device performance.

Nanocrystal Ordering Enhances Thermal Transport and Mechanics in Single-Domain Colloidal Nanocrystal Superlattices

Colloidal nanocrystal (NC) assemblies are promising for optoelectronic, photovoltaic, and thermoelectric applications. However, using these materials can be challenging in actual devices because they have a limited range of thermal conductivity and elastic modulus, which results in heat dissipation and mechanical robustness challenges. Here, we report thermal transport and mechanical measurements on single-domain colloidal PbS nanocrystal superlattices (NCSLs) that have long-range order as well as measurements on nanocrystal films (NCFs) that are comparatively disordered. Over an NC diameter range of 3.0-6.1 nm, we observe that NCSLs have thermal conductivities and Young's moduli that are up to ∼3 times higher than those of the corresponding NCFs. We also find that these properties are more sensitive to NC diameter in NCSLs relative to NCFs. Our measurements and computational modeling indicate that stronger ligand-ligand interactions due to enhanced ligand interdigitation and alignment in NCSLs account for the improved thermal transport and mechanical properties.

Zwitterionic Block Copolymers for the Synthesis and Stabilization of Perovskite Nanocrystals

Traditional hot injection methods for the preparation of cesium lead halide perovskite nanocrystals (CsPbX₃ PNCs, where X=Cl, Br, or I) rely on small molecule surfactants to produce PNCs with cube, plate, or rod-like morphologies. Here, we describe a new method whereby zwitterionic block copolymers are employed as macromolecular ligands in PNC synthesis, affording PNCs with excellent colloidal stability, high photoluminescence quantum yield, and in some cases distinctly non-cubic shapes. The block copolymers used in this study - composed of a poly(n-butyl methacrylate) hydrophobic block and zwitterionic methacrylate hydrophilic blocks - dissolve in useful solvents for PNC growth despite containing large mole percentages of zwitterionic groups. PNCs prepared with block copolymer ligands were found to disperse and retain their fluorescence in a range of polar organic solvents and were amenable to direct integration into optically transparent nanocomposite thin films with high PNC content.

Optoelectronic Neural Interfaces Based on Quantum Dots

Optoelectronic modulation of neural activity is an emerging field for the investigation of neural circuits and the development of neural therapeutics. Among a wide variety of nanomaterials, colloidal quantum dots provide unique optoelectronic features for neural interfaces such as sensitive tuning of electron and hole energy levels via the quantum confinement effect, controlling the carrier localization via band alignment, and engineering the surface by shell growth and ligand engineering. Even though colloidal quantum dots have been frontier nanomaterials for solar energy harvesting and lighting, their application to optoelectronic neural interfaces has remained below their significant potential. However, this potential has recently gained attention with the rise of bioelectronic medicine. In this review, we unravel the fundamentals of quantum-dot-based optoelectronic biointerfaces and discuss their neuromodulation mechanisms starting from the quantum dot level up to electrode-electrolyte interactions and stimulation of neurons with their physiological pathways. We conclude the review by proposing new strategies and possible perspectives toward nanodevices for the optoelectronic stimulation of neural tissue by utilizing the exceptional nanoscale properties of colloidal quantum dots.

Nanoformulated Remdesivir with Extremely Low Content of Poly(2-oxazoline) - Based Stabilizer for Aerosol Treatment of COVID-19

The rise of the novel virus SARS-CoV2 which causes the disease known as COVID-19 has led to a global pandemic claiming millions of lives. With no clinically approved treatment for COVID-19, physicians initially struggled to treat the disease, and a need remains for improved anti-viral therapies in this area. We conceived early in the pandemic that an inhalable formulation of the drug remdesivir which directly targets the virus at the site of infection could improve therapeutic outcomes in COVID-19. We developed a set of requirements that would be conducive to rapid drug approval: 1) try to use GRAS reagents 2) minimize excipient concentration and 3) achieve a working concentration of 5 mg/mL remdesivir to obtain a deliverable dose which is 5-10% of the IV dose. In this work, we discovered that Poly(2-oxazoline) block copolymers can stabilize drug nanocrystal suspensions and provide suitable formulation characteristics for aerosol delivery while maintaining anti-viral efficacy. We believe POx block copolymers can be used as a semi-ubiquitous stabilizer for the rapid development of nanocrystal formulations for new and existing diseases. This article is protected by copyright. All rights reserved.

Quantum Shells Boost the Optical Gain of Lasing Media

Auger decay of multiple excitons represents a significant obstacle to photonic applications of semiconductor quantum dots (QDs). This nonradiative process is particularly detrimental to the performance of QD-based electroluminescent and lasing devices. Here, we demonstrate that semiconductor quantum shells with an "inverted" QD geometry inhibit Auger recombination, allowing substantial improvements to their multiexciton characteristics. By promoting a spatial separation between multiple excitons, the quantum shell geometry leads to ultralong biexciton lifetimes (>10 ns) and a large biexciton quantum yield. Furthermore, the architecture of quantum shells induces an exciton-exciton repulsion, which splits exciton and biexciton optical transitions, giving rise to an Auger-inactive single-exciton gain mode. In this regime, quantum shells exhibit the longest optical gain lifetime reported for colloidal QDs to date (>6 ns), which makes this geometry an attractive candidate for the development of optically and electrically pumped gain media.

Nanosized-Loratadine Embedded Orodispersible Films for Enhanced Bioavailability: Scalable Preparations and Characterizations

The patient-centric strategy urges the pharmaceutical companies to develop orodispersible films (ODF) as a new approach for pediatrics. However, the most common ODF-fabricated method, solvent casting, is facing the safety challenges of safety during manufacturing. To obtain favorable formulations with the ease of use and rapid dissolution, nanotechnology has been accounted for the development process. In this work, we investigated the wet-milling technique in preparing nanocarriers for loratadine-a hydrophobic anti-histamine drug. The results showed that the wet-milling technique could produce nanocarriers at the size of 400 nm. The reduction of particle size induced the increase of solubility and the dissolution rate of loratadine. Moreover, the pre-formulation of nanosized materials could adapt to the preparation of orodispersible films that disintegrated (less than 60s) and dissolved quickly. The DSC results showed that after the milling process, the crystallinity of loratadine was unchanged; however, the reduction in size induced an enhancement of drug bioavailability. After orally administrated to rats, the drug was quickly reached to the blood circulation, just after 30 min. C_max increased from 44.97 ng/mL for the raw drug to 101.02 ng/mL for the nanocrystal leading to an enhancement of the AUC_0-24h by 5.69-fold when the nanocrystal ODF was administrated. The ease of formulation and the improvement of drug solubility as well as bioavailability potentiated orodispersible films as a promising drug delivery for loratadine. Graphical abstract.

Designing Efficient Si Quantum Dots and LEDs by Quantifying Ligand Effects

The impact of colloidal silicon quantum dots (SiQDs) on next-generation light sources is promising. However, factors determining the efficiency of SiQDs, such as the photoluminescence (PL) wavelength, PL quantum yield (PLQY), and the SiQD LED performance based on the type of ligand, ligand coverage, stress, and dangling bonds, have not been quantified. Characterizing these variables would accelerate the design and implementation of SiQDs. Herein, colloidal SiQDs were synthesized by pyrolyzing hydrogen silsesquioxane and their surfaces were terminated with 1-decene by either thermal hydrosilylation (HT-SiQDs) or room-temperature hydrosilylation using PCl₅ (RT-SiQD). As a result, PL, PL-excitation, and ultraviolet-visible absorption spectra were similar, but their PLQYs were significantly different: 54% (RT-SiQDs) vs 19% (HT-SiQDs). To understand their similarities and differences, surface coverages (dangling bonds, Si-H (≡Si-H₁, ═Si-H₂, and -Si-H₃), Si-O-Si, Si-C, Si-Cl) were determined. A core stress analysis established that a single ligand terminated to a SiQD bond site stretched the Si-Si bond length by 0.3%. From the two well-defined SiQDs, the PLQY and SiQD LED efficiency were attributed to four factors: low coverage of insulator ligands, the Cl ligand effect on radiative and nonradiative rates, negligible dangling bonds, and a SiQD core with low tensile stress. The PLQY of the RT-SiQDs in toluene was 80%. In addition, the 20× electroluminescence intensity difference of the LEDs originated from a 10× difference in current density and a 2× difference in Auger recombination. The concepts demonstrated here can be applied to further improve the PLQY and LED efficiencies of SiQDs with other ligands.

Flexible Scintillation Silica Fiber with Engineered Nanocrystals for Remote Real-Time X-ray Detection

Scintillation fibers based on rare-earth ion-doped crystal materials have attracted significant attention for applications in a wide range of areas from security to healthcare. However, the scintillation performance of crystal fibers is severely limited owing to the complex preparation process. Here, we report a modified preparation process of the transparent Ce/Tb co-doped yttrium pyrosilicate (YPS) nanocrystal silica fiber for the first time, which was fabricated by the CO₂ laser-heated method assisted with optimal thermal annealing. An YPS nanocrystal phase with an average size of approximately 38 nm is obtained by controlling the diffusion concentration of SiO₂ in the fiber core region. Both Ce³⁺ and Tb³⁺ ions were successfully embedded into YPS nanocrystals, which enhanced the energy transfer with an efficiency of 59.87% between the dopants as well as brighter green light emission. Furthermore, the X-ray-excited remote radioluminescence response of the obtained YPS nanocrystal fiber with a length of 20 m was approximately 1 order of magnitude larger than that of the precursor fiber, while the dose rate response exhibited excellent linearity. It is believed that the novel transparent YPS nanocrystal-doped silica optical fibers, combined with their excellent fluorescent properties, could be promising candidates for scintillators, fiber lasers, and phosphors.

The Evaluation of Meloxicam Nanocrystals by Oral Administration with Different Particle Sizes

Meloxicam (MLX) is a non-steroidal anti-inflammatory drug used to treat rheumatoid arthritis and osteoarthritis. However, its poor water solubility limits the dissolution process and influences absorption. In order to solve this problem and improve its bioavailability, we prepared it in nanocrystals with three different particle sizes to improve solubility and compare the differences between various particle sizes. The nanocrystal particle sizes were studied through dynamic light scattering (DLS) and laser scattering (LS). Transmission electron microscopy (TEM) was used to characterize the morphology of nanocrystals. The sizes of meloxicam-nanocrystals-A (MLX-NCs-A), meloxicam-nanocrystals-B (MLX-NCs-B), and meloxicam-nanocrystals-C (MLX-NCs-C) were 3.262 ± 0.016 μm, 460.2 ± 9.5 nm, and 204.9 ± 2.8 nm, respectively. Molecular simulation was used to explore the distribution and interaction energy of MLX molecules and stabilizer molecules in water. The results of differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) proved that the crystalline state did not change in the preparation process. Transport studies of the Caco-2 cell model indicated that the cumulative degree of transport would increase as the particle size decreased. Additionally, plasma concentration-time curves showed that the AUC0-∞ of MLX-NCs-C were 3.58- and 2.92-fold greater than those of MLX-NCs-A and MLX-NCs-B, respectively. These results indicate that preparing MLX in nanocrystals can effectively improve the bioavailability, and the particle size of nanocrystals is an important factor in transmission and absorption.

Resveratrol Nanocrystal Incorporated into Mesoporous Material: Rational Design and Screening through Quality-by-Design Approach

Bioflavonoids from grape seeds feature powerful antioxidant and immunostimulant activities, but they present problems related to solubility and bioavailability. Nanocrystal (NC) incorporated into a mesoporous carrier is a promising strategy to address these issues. However, the preparation of this formulation involves the selection of factors affecting its critical quality attributes. Hence, this study aimed to develop an NC formulation incorporating resveratrol into a soluble mesoporous carrier based on rational screening design using a systematic and continuous development process, the quality-by-design paradigm. A mesoporous soluble carrier was prepared by spray-drying mannitol and ammonium carbonate. The NC was obtained by introducing the evaporated solvent containing a drug/polymer/surfactant and mesoporous carrier to the medium. A 2^6-2 fractional factorial design (FFD) approach was carried out in the screening process to understand the main effect factors. The type and concentration of polymer and surfactant, resveratrol loading, and solvent were determined on the NC characteristics. The results indicated that drug loading, particle size, and solubility were mainly affected by RSV loading, PEG concentration, and Kolliphor EL concentration. The polymer contributed dominantly to reducing the particle size and enhancing solubility in this screening design. The presence of surfactants in this system made it possible to prolong the supersaturation process. According to the 2^6-2 FFD, the factors selected to be further developed using a statistical technique according to the quality-by design-approach, Box Behnken Design, were Kolliphor EL, PEG400, and RSV loading.

Improved One- and Multiple-Photon Excited Photoluminescence from Cd2+-Doped CsPbBr3 Perovskite NCs

Metal halide perovskite nanocrystals (NCs) attract much attention for light-emitting applications due to their exceptional optical properties. More recently, perovskite NCs have begun to be considered a promising material for nonlinear optical applications. Numerous strategies have recently been developed to improve the properties of metal halide perovskite NCs. Among them, B-site doping is one of the most promising ways to enhance their brightness and stability. However, there is a lack of study of the influence of B-site doping on the nonlinear optical properties of inorganic perovskite NCs. Here, we demonstrate that Cd²⁺ doping simultaneously improves both the linear (higher photoluminescence quantum yield, larger exciton binding energy, reduced trap states density, and faster radiative recombination) and nonlinear (higher two- and three-photon absorption cross-sections) optical properties of CsPbBr₃ NCs. Cd²⁺ doping results in a two-photon absorption cross-section, reaching 2.6 × 10⁶ Goeppert-Mayer (GM), which is among the highest reported for CsPbBr₃ NCs.

Folate-functionalized SMMC-7721 liver cancer cell membrane-cloaked paclitaxel nanocrystals for targeted chemotherapy of hepatoma

In this study, we prepared a folic acid-functionalized SMMC-7721 liver cancer cell membrane (CM)-encapsulated paclitaxel nanocrystals system (FCPN) for hepatoma treatment. Transmission electron microscopy (TEM) characterization showed that FCPN was irregular spherical shapes with a particle size larger than 200 nm and a coated thickness of approximately 20 nm. In an in vitro release experiment, FCPN indicated a slowly release effect of paclitaxel (PTX). Cell experiments demonstrated that FCPN was taken up by SMMC-7721 cells and significantly inhibited the proliferation of SMMC-7721 cells, which illustrated that FCPN had good targeting ability compared with PN and CPN. According to the results of in vivo animal experiments, FCPN significantly inhibited tumor growth. Tissue distribution experiments proved that FCPN could accumulate significantly in tumor tissues, which further explained why FCPN had good targeting ability. These results clearly suggested that folate-functionalized homotypic CM bionic nanosystems might represent a very valuable method for liver cancer treatment in the future.

Facile and Scalable Synthesis and Self-Assembly of Chitosan Tartaric Sodium

Chitosan-based nanostructures have been widely applied in biomineralization and biosensors owing to its polycationic properties. The creation of chitosan nanostructures with controllable morphology is highly desirable, but has met with limited success yet. Here, we report that nanostructured chitosan tartaric sodium (CS-TA-Na) is simply synthesized in large amounts from chitosan tartaric ester (CS-TA) hydrolyzed by NaOH solution, while the CS-TA is obtained by dehydration-caused crystallization. The structures and self-assembly properties of CS-TA-Na are carefully characterized by Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (1H-NMR), X-ray diffraction (XRD), differential scanning calorimeter (DSC), transmission electron microscopy (TEM), a scanning electron microscope (SEM) and a polarizing optical microscope (POM). As a result, the acquired nanostructured CS-TA-Na, which is dispersed in an aqueous solution 20-50 nm in length and 10-15 nm in width, shows both the features of carboxyl and amino functional groups. Moreover, morphology regulation of the CS-TA-Na nanostructures can be easily achieved by adjusting the solvent evaporation temperature. When the evaporation temperature is increased from 4 °C to 60 °C, CS-TA-Na nanorods and nanosheets are obtained on the substrates, respectively. As far as we know, this is the first report on using a simple solvent evaporation method to prepare CS-TA-Na nanocrystals with controllable morphologies.

Magnetically Controllable Flowerlike, Polyhedral Ag-Cu-Co3O4 for Surface-Enhanced Raman Scattering

Syntheses of Cu-, Ag-, and Ag-Cu-Co₃O₄ nanomaterials are of interest for a wide range of applications including electrochemistry, thermal catalysis, energy storage, and electronics. However, Co₃O₄-based nanomaterials have not been explored for surface-enhanced Raman scattering (SERS). Here, we present Cu-, Ag-, and Ag-Cu-Co₃O₄ nanomaterials of a hierarchical flower shape comprising two separate phases: a pure Cu or Ag core and multiple Co₃O₄ branches, in which the optical properties of the core and the magnetic properties of the branches are integrated. In addition, a series of nonmagnetic Cu-dominant Cu-Co-O polyhedra without Co₃O₄ branches were derived from Cu-Co₃O₄. The polyhedron morphology can be controlled and transformed among cubes, cuboctahedra, and truncated octahedra by tuning the amounts of ligands and additives to vary the potential energy and growth rate of specific crystal facets. The flowerlike Cu-, Ag-, and Ag-Cu-Co₃O₄ were characterized for SERS enhancement, showing that Ag-Cu-Co₃O₄ does not enhance SERS from 4-mercaptobenzoic acid (4-MBA) but dramatically and selectively does so for adsorbed rhodamine 6G. Obviously, the synergy of Ag and Cu within the Co₃O₄ flower constraint promotes the SERS activity. This type of spinel with not only excellent SERS activity but also ferromagnetism could be of great potential in tandem SERS detection/magnetic separation and related applications.

Cow-to-cow variation in nanocrystal synthesis: learning from technical-grade oleylamine

Many technical-grade reagents, including oleylamine, are broadly used as ligands in nanocrystal synthesis, allowing for cost-effective, and more environmentally friendly, preparation of materials in useful quantities. Impurities can represent 30% or more of these reagent blends, and have frequently emerged as substantial drivers of nanocrystal morphology, assembly, or other physical properties, making it important to understand their composition. Some functional alkyl reagents are derived from natural sources (e.g. often beef tallow, in the case of oleylamine), introducing alkyl chain structures very different than those that might be expected as side products of synthesis from pure feedstocks. Additionally, impurities can exhibit variations based on biological factors (e.g. species, diet, season). In biology, blends of alkyl chains allow for surprisingly sophisticated function of amphiphiles in the cell membrane, pointing to the possibility of similar control in synthetic materials if reagent composition were either better controlled or better understood. Here, we provide brief context on the breadth of roles technical-grade impurities have played in nanocrystal materials, followed by a perspective on oleylamine impurities, their physical properties, and their potential contributions to nanomaterial function.