Translational Organic Neural Interface Devices at Single Neuron Resolution

Recording from the human brain at the spatiotemporal resolution of action potentials provides critical insight into mechanisms of higher cognitive functions and neuropsychiatric disease that is challenging to derive from animal models. Here, organic materials and conformable electronics are employed to create an integrated neural interface device compatible with minimally invasive neurosurgical procedures and geared toward chronic implantation on the surface of the human brain. Data generated with these devices enable identification and characterization of individual, spatially distribute human cortical neurons in the absence of any tissue penetration (n = 229 single units). Putative single-units are effectively clustered, and found to possess features characteristic of pyramidal cells and interneurons, as well as identifiable microcircuit interactions. Human neurons exhibit consistent phase modulation by oscillatory activity and a variety of population coupling responses. The parameters are furthermore established to optimize the yield and quality of single-unit activity from the cortical surface, enhancing the ability to investigate human neural network mechanisms without breaching the tissue interface and increasing the information that can be safely derived from neurophysiological monitoring.

Not All Aggregates Are Made the Same: Distinct Structures of Solution Aggregates Drastically Modulate Assembly Pathways, Morphology, and Electronic Properties of Conjugated Polymers

Tuning structures of solution-state aggregation and aggregation-mediated assembly pathways of conjugated polymers is crucial for optimizing their solid-state morphology and charge-transport property. However, it remains challenging to unravel and control the exact structures of solution aggregates, let alone to modulate assembly pathways in a controlled fashion. Herein, aggregate structures of an isoindigo-bithiophene-based polymer (PII-2T) are modulated by tuning selectivity of the solvent toward the side chain versus the backbone, which leads to three distinct assembly pathways: direct crystallization from side-chain-associated amorphous aggregates, chiral liquid crystal (LC)-mediated assembly from semicrystalline aggregates with side-chain and backbone stacking, and random agglomeration from backbone-stacked semicrystalline aggregates. Importantly, it is demonstrated that the amorphous solution aggregates, compared with semicrystalline ones, lead to significantly improved alignment and reduced paracrystalline disorder in the solid state due to direct crystallization during the meniscus-guided coating process. Alignment quantified by the dichroic ratio is enhanced by up to 14-fold, and the charge-carrier mobility increases by a maximum of 20-fold in films printed from amorphous aggregates compared to those from semicrystalline aggregates. This work shows that by tuning the precise structure of solution aggregates, the assembly pathways and the resulting thin-film morphology and device properties can be drastically tuned.

High mobility and ON/OFF ratio of solution-processable p-channel OFETs from arylacetylene end-capped alkoxyphenanthrenes

New arylacetylene end-capped alkoxyphenanthrenes were synthesized and demonstrated as the best active layer for solution-processable p -channel organic field-effect transistors. The alkoxy chain embedded compounds exhibited enhanced solubility and induced non-covalent interactions resulting in effective molecular packing. The 'Lewis soft' heteroatoms direct the most stable conformation with dihedral angles possible for molecular interactions, and energy levels. DFT studies supported the finetuning of FMOs, with high HOMO levels ~-5.2 eV ensuring a low barrier for charge injection. OFET devices exhibited a maximum charge carrier mobility up to 1.30 cm 2 /Vs with the highest ON/OFF ratio of 10 7 . The strong π-π interactions and the crystallinity of the films are well supported by GIXRD and SEM analysis.

Benchmarking organic electrochemical transistors for plant electrophysiology

Plants are able to sense and respond to a myriad of external stimuli, using different signal transduction pathways, including electrical signaling. The ability to monitor plant responses is essential not only for fundamental plant science, but also to gain knowledge on how to interface plants with technology. Still, the field of plant electrophysiology remains rather unexplored when compared to its animal counterpart. Indeed, most studies continue to rely on invasive techniques or on bulky inorganic electrodes that oftentimes are not ideal for stable integration with plant tissues. On the other hand, few studies have proposed novel approaches to monitor plant signals, based on non-invasive conformable electrodes or even organic transistors. Organic electrochemical transistors (OECTs) are particularly promising for electrophysiology as they are inherently amplification devices, they operate at low voltages, can be miniaturized, and be fabricated in flexible and conformable substrates. Thus, in this study, we characterize OECTs as viable tools to measure plant electrical signals, comparing them to the performance of the current standard, Ag/AgCl electrodes. For that, we focused on two widely studied plant signals: the Venus flytrap (VFT) action potentials elicited by mechanical stimulation of its sensitive trigger hairs, and the wound response of Arabidopsis thaliana. We found that OECTs are able to record these signals without distortion and with the same resolution as Ag/AgCl electrodes and that they offer a major advantage in terms of signal noise, which allow them to be used in field conditions. This work establishes these organic bioelectronic devices as non-invasive tools to monitor plant signaling that can provide insight into plant processes in their natural environment.

Synthesis of n-Type [60]Fullerene Derivatives with Sterically Bulky tert-Butyl Groups for Vacuum Deposition Processes

[60]Fullerene derivatives with high thermal stability can be used for  vacuum deposition   under heating to fabricate thin films for organic electronic devices. Here we investigated the thermal stability of [60]fullerene derivatives   with various bulky substituents for thermal  evaporation under vacuum by means of thermogravimetric analysis under reduced and normal pressure. We found sterically bulky groups such as  tert -butyl groups of [60]fullerene derivatives lowered the vacuum deposition temperature. Also, we performed isothermal thermogravimetric analysis   to examine the long-term thermal stability of the designed compounds under heating conditions. Furthermore,  we investigated the UV-Vis absorption patterns of the deposited films. Absorption in the blue wavelength range, which was attributed to intermolecular HOMO-LUMO transitions among the molecular orbitals of adjacent [60]fullerenes, was dramatically modified. These results were associated with the prevention of aggregation among neighboring [60]fullerene by the sterically bulky groups. This concept could contribute to expanding the use of evaporable [60]fullerene derivatives in organic thin-film electronics research fields.

Virtual Screening for Organic Solar Cells and Light Emitting Diodes

The field of organic semiconductors is multifaceted and the potentially suitable molecular compounds are very diverse. Representative examples include discotic liquid crystals, dye-sensitized solar cells, conjugated polymers, and graphene-based low-dimensional materials. This huge variety not only represents enormous challenges for synthesis but also for theory, which aims at a comprehensive understanding and structuring of the plethora of possible compounds. Eventually computational methods should point to new, better materials, which have not yet been synthesized. In this perspective, it is shown that the answer to this question rests upon the delicate balance between computational efficiency and accuracy of the methods used in the virtual screening. To illustrate the fundamentals of virtual screening, chemical design of non-fullerene acceptors, thermally activated delayed fluorescence emitters, and nanographenes are discussed.

In Situ Studies of the Swelling by an Electrolyte in Electrochemical Doping of Ethylene Glycol-Substituted Polythiophene

Organic mixed ionic electronic conductors (OMIECs) have the potential to enable diverse new technologies, ranging from biosensors to flexible energy storage devices and neuromorphic computing platforms. However, a study of these materials in their operating state, which convolves both passive and potential-driven solvent, cation, and anion ingress, is extremely difficult, inhibiting rational material design. In this report, we present a novel approach to the in situ studies of the electrochemical switching of a prototypical OMIEC based on oligoethylene glycol (oEG) substitution of semicrystalline regioregular polythiophene via grazing-incidence X-ray scattering. By studying the crystal lattice both dry and in contact with the electrolyte while maintaining potential control, we can directly observe the evolution of the crystalline domains and their relationship to film performance in an electrochemically gated transistor. Despite the oEG side-chain enabling bulk electrolyte uptake, we find that the crystalline regions are relatively hydrophobic, exhibiting little (less than one water per thiophene) swelling of the undoped polymer, suggesting that the amorphous regions dominate the reported passive swelling behavior. With applied potential, we observe that the π-π separation in the crystals contracts while the lamella spacing increases in a balanced fashion, resulting in a negligible change in the crystal volume. The potential-induced changes in the crystal structure do not clearly correlate to the electrical performance of the film as an organic electrochemical transistor, suggesting that the transistor performance is strongly influenced by the amorphous regions of the film.

Dual-Mode Organic Electrochemical Transistors Based on Self-Doped Conjugated Polyelectrolytes for Reconfigurable Electronics

Reconfigurable organic logic devices are promising candidates for next generations of efficient computing systems and adaptive electronics. Ideally, such devices would be of simple structure and design, be power efficient, and compatible with high-throughput microfabrication techniques. This work reports an organic reconfigurable logic gate based on novel dual-mode organic electrochemical transistors (OECTs), which employ a self-doped conjugated polyelectrolyte as the active material, which then allows the transistors to operate in both depletion mode and enhancement mode. Furthermore, mode switching is accomplished by simply altering the polarity of the applied gate and drain voltages, which can be done on the fly. In contrast, achieving similar mode-switching functionality with other organic transistors typically requires complex molecular design or multi-device engineering. It in shown that dual-mode functionality is enabled by the concurrent existence of anion doping and cation dedoping of the films. A device physics model that accurately describes the behavior of these transistors is developed. Finally, the utility of these dual-mode transistors for implementing reconfigurable logic by fabricating a logic gate that may be switched between logic gates AND to NOR, and OR to NAND on the fly is demonstrated.

Mixed Ionic-Electronic Conduction, a Multifunctional Property in Organic Conductors

Organic mixed ionic-electronic conductors (OMIECs) have gained recent interest and rapid development due to their versatility in diverse applications ranging from sensing, actuation and computation to energy harvesting/storage, and information transfer. Their multifunctional properties arise from their ability to simultaneously participate in redox reactions as well as modulation of ionic and electronic charge density throughout the bulk of the material. Most importantly, the ability to access charge states with deep modulation through a large extent of its density of states and physical volume of the material enables OMIEC-based devices to display exciting new characteristics and opens up new degrees of freedom in device design. Leveraging the infinite possibilities of the organic synthetic toolbox, this perspective highlights several chemical and structural design approaches to modify OMIECs' properties important in device applications such as electronic and ionic conductivity, color, modulus, etc. Additionally, the ability for OMIECs to respond to external stimuli and transduce signals to myriad types of outputs has accelerated their development in smart systems. This perspective further illustrates how various stimuli such as electrical, chemical, and optical inputs fundamentally change OMIECs' properties dynamically and how these changes can be utilized in device applications.

Solution-Processable Semiconducting Conjugated Planar Network

After the emergence of graphene in the material science field, top-down and bottom-up studies to develop semiconducting organic materials with layered structures became highly active. However, most of them have suffered from poor processability, which hampers device fabrication and frustrates practical applications. Here, we suggest an unconventional approach to fabricating semiconducting devices, which avoids the processability issue. We designed a soluble amorphous network using a solution process to form a thin film on a substrate. We then employed heat treatment to develop a flattened organic structure in the thin film, as an active layer for organic thin-film transistors (TFTs). The fabricated TFTs showed good performance in both horizontal and vertical charge transport, suggesting a versatile and useful approach for the development of organic semiconductors.

Efficient Fabrication of Organic Electrochemical Transistors via Wet Chemical Processing

A wet processing method to fabricate high-performance organic electrochemical transistors (OECTs) is reported. Wet chemical processing enables a simple and reliable patterning step, substituting several complex and expensive cleanroom procedures in the fabrication of OECTs. We fabricate depletion-mode OECTs based on poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and enhancement-mode OECTs based on a conjugated polyelectrolyte PCPDTBT-SO₃K on rigid and flexible substrates using this wet processing method. We show that the wet chemical processing step can also serve as a chemical treatment to enhance the electrical properties of the active material in OECTs. To highlight the potential of the fabrication process in applications, a transistor-based chemical sensor is demonstrated, capable of detecting methylene blue, a popular redox reporter in biodetection and immunoassays, with good detectivity. Given the tremendous potential of OECTs in emerging technologies such as biosensing and neuromorphic computing, this simple fabrication process established herein will render the OECT platform more accessible for research and applications.

Intrinsically Stretchable Block Copolymer Based on PEDOT:PSS for Improved Performance in Bioelectronic Applications

The conductive polyelectrolyte complex poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is ubiquitous in research dealing with organic electronic devices (e.g., solar cells, wearable and implantable sensors, and electrochemical transistors). In many bioelectronic applications, the applicability of commercially available formulations of PEDOT:PSS (e.g., Clevios) is limited by its poor mechanical properties. Additives can be used to increase the compliance but pose a risk of leaching, which can result in device failure and increased toxicity (in biological settings). Thus, to increase the mechanical compliance of PEDOT:PSS without additives, we synthesized a library of intrinsically stretchable block copolymers. In particular, controlled radical polymerization using a reversible addition-fragmentation transfer process was used to generate block copolymers consisting of a block of PSS (of fixed length) appended to varying blocks of poly(poly(ethylene glycol) methyl ether acrylate) (PPEGMEA). These block copolymers (PSS₍₁₎-b-PPEGMEA_(x), where x ranges from 1 to 6) were used as scaffolds for oxidative polymerization of PEDOT. By increasing the lengths of the PPEGMEA segments on the PEDOT:[PSS₍₁₎-b-PPEGMEA_(1-6)] block copolymers, ("Block-1" to "Block-6"), or by blending these copolymers with PEDOT:PSS, the mechanical and electronic properties of the polymer can be tuned. Our results indicate that the polymer with the longest block of PPEGMEA, Block-6, had the highest fracture strain (75%) and lowest elastic modulus (9.7 MPa), though at the expense of conductivity (0.01 S cm^-1). However, blending Block-6 with PEDOT:PSS to compensate for the insulating nature of the PPEGMEA resulted in increased conductivity [2.14 S cm^-1 for Blend-6 (2:1)]. Finally, we showed that Block-6 outperforms a commercial formulation of PEDOT:PSS as a dry electrode for surface electromyography due to its favorable mechanical properties and better adhesion to skin.

Long-Wavelength Instabilities Impact Alignment during Blade Coating of a Stretchable Organic Transistor Blend

The use of polymer-polymer blends to tailor mechanical properties and improve electrical performance is becoming widespread in the field of printed electronics. Similarly, meniscus-guided coating can be used to tailor electrical properties through alignment of the semiconducting material. We report on a long-wavelength instability during blade coating of a semiconducting polymer/elastomer blend for organic transistor applications that results in significant variation of the semiconducting polymer nanofibril alignment across the instability period. By correlating measurements over diverse (nm to mm) length scales, we can directly relate the charge transport in top-gate transistors to the local polymer nanofibril alignment. Hole mobility is directly correlated to the local alignment and shows an ≈2 × variation across the instability for devices aligned with the coating direction. The potential for long-wavelength instabilities to create device-relevant morphology variations should be considered when optimizing coating conditions. These results reveal considerable potential for error in assuming that smooth films are necessarily structurally uniform; material structure may spatially vary for some coating methods, leading to a correlated, spatially varying device performance.

Molecular Weight Tuning of Organic Semiconductors for Curved Organic-Inorganic Hybrid X-Ray Detectors

Curved X-ray detectors have the potential to revolutionize diverse sectors due to benefits such as reduced image distortion and vignetting compared to their planar counterparts. While the use of inorganic semiconductors for curved detectors are restricted by their brittle nature, organic-inorganic hybrid semiconductors which incorporated bismuth oxide nanoparticles in an organic bulk heterojunction consisting of poly(3-hexylthiophene-2,5-diyl) (P3HT) and [6,6]-phenyl C71 butyric acid methyl ester (PC₇₀ BM) are considered to be more promising in this regard. However, the influence of the P3HT molecular weight on the mechanical stability of curved, thick X-ray detectors remains less well understood. Herein, high P3HT molecular weights (>40 kDa) are identified to allow increased intermolecular bonding and chain entanglements, resulting in X-ray detectors that can be curved to a radius as low as 1.3 mm with low deviation in X-ray response under 100 repeated bending cycles while maintaining an industry-standard dark current of <1 pA mm^-2 and a sensitivity of ≈ 0.17 μC Gy^-1 cm^-2 . This study identifies a crucial missing link in the development of curved detectors, namely the importance of the molecular weight of the polymer semiconductors used.

Diels-Alder Cycloaddition with CO, CO2, SO2, or N2 Extrusion: A Powerful Tool for Material Chemistry

Phenyl, naphthyl, polyarylphenyl, coronene, and other aromatic and polyaromatic moieties primarily influence the final materials' properties. One of the synthetic tools used to implement (hetero)aromatic moieties into final structures is Diels-Alder cycloaddition (DAC), typically combined with Scholl dehydrocondensation. Substituted 2-pyranones, 1,1-dioxothiophenes, and, especially, 1,3-cyclopentadienones are valuable substrates for [4 + 2] cycloaddition, leading to multisubstituted derivatives of benzene, naphthalene, and other aromatics. Cycloadditions of dienes can be carried out with extrusion of carbon dioxide, carbon oxide, or sulphur dioxide. When pyranones, dioxothiophenes, or cyclopentadienones and DA cycloaddition are aided with acetylenes including masked ones, conjugated or isolated diynes, or polyynes and arynes, aromatic systems are obtained. This review covers the development and the current state of knowledge regarding thermal DA cycloaddition of dienes mentioned above and dienophiles leading to (hetero)aromatics via CO, CO2, or SO2 extrusion. Particular attention was paid to the role that introduced aromatic moieties play in designing molecular structures with expected properties. Undoubtedly, the DAC variants described in this review, combined with other modern synthetic tools, constitute a convenient and efficient way of obtaining functionalized nanomaterials, continually showing the potential to impact materials sciences and new technologies in the nearest future.

Influence of π-Endcaps on the Performance of Functionalized Quinolines for p-Channel OFETs

This study investigates the influence of aryl and ethynyl linkers as well the effect of various pi-end-groups on the performance of the quinoline-based organic field-effect transistors. A series of new functionalized quinolines with D-π-A-π-D and A-π-A-π-A architectures are designed and synthesized via the Sonagashira cross-coupling reaction. All the new compounds are well characterized and their photophysical properties are studied. The bottom gate-top contact-organic field-effect transistors devices are fabricated using the spin-coating technique. By employing the pre and post-annealing technique, films with uniform surface coverage are obtained. The variation in the end-groups results in versatile packing arrangements which determine their good charge transport properties. The p-channel transistor behavior is observed for all the new compounds. Among the molecules studied, methoxyphenyl and thiophen-2-yl terminal functionalized with D-π-A-π-D architecture exhibit the higher p-channel transistor characteristics with hole mobilities of 1.39 and 1.33 cm² V^-1 s^-1 , respectively. The good charge carrier mobilities are supported by an electron-donating methoxy group and thiophene as the end-groups with high highest occupied molecular orbitals (HOMO) and lowest unoccupied molecular orbitals (LUMO) levels, extensive π-conjugation, and better self-assembly.

Flexible Polymer X-ray Detectors with Non-fullerene Acceptors for Enhanced Stability: Toward Printable Tissue Equivalent Devices for Medical Applications

There is growing interest in the development of novel materials and devices capable of ionizing radiation detection for medical applications. Organic semiconductors are promising candidates to meet the demands of modern detectors, such as low manufacturing costs, mechanical flexibility, and a response to radiation equivalent to human tissue. However, organic semiconductors have typically been employed in applications that convert low energy photons into high current densities, for example, solar cells and LEDs, and thus existing design rules must be re-explored for ionizing radiation detection where high energy photons are converted into typically much lower current densities. In this work, we report the optoelectronic and X-ray dosimetric response of a tissue equivalent organic photodetector fabricated with solution-based inks prepared from polymer donor poly(3-hexylthiophene) (P3HT) blended with either a non-fullerene acceptor (5Z,5'Z)-5,5'-((7,7'-(4,4,9,9-tetraoctyl-4,9-dihydro-s-indaceno[1,2-b:5,6-b']dithiophene-2,7-diyl)bis(benzo[c][1,2,5]thiadiazole-7,4-diyl))bis(methanylylidene))bis(3-ethyl-2-thioxothiazolidin-4-one) (o-IDTBR) or a fullerene acceptor, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). Indirect detection of X-rays was achieved via coupling of organic photodiodes with a plastic scintillator. Both detectors displayed an excellent response linearity with dose, with sensitivities to 6 MV photons of 263.4 ± 0.6 and 114.2 ± 0.7 pC/cGy recorded for P3HT:PCBM and P3HT:o-IDTBR detectors, respectively. Both detectors also exhibited a fast temporal response, able to resolve individual 3.6 μs pulses from the linear accelerator. Energy dependence measurements highlighted that the photodetectors were highly tissue equivalent, though an under-response in devices compared to water by up to a factor of 2.3 was found for photon energies of 30-200 keV due to the response of the plastic scintillator. The P3HT:o-IDTBR device exhibited a higher stability to radiation, showing just an 18.4% reduction in performance when exposed to radiation doses of up to 10 kGy. The reported devices provide a successful demonstration of stable, printable, flexible, and tissue-equivalent radiation detectors with energy dependence similar to other scintillator-based detectors used in radiotherapy.

An Informatics Approach for Designing Conducting Polymers

Doping conjugated polymers, which are potential candidates for the next generation of organic electronics, is an effective strategy for manipulating their electrical conductivity. However, selecting a suitable polymer-dopant combination is exceptionally challenging because of the vastness of the chemical, configurational, and morphological spaces one needs to search. In this work, high-performance surrogate models, trained on available experimentally measured data, are developed to predict the p-type electrical conductivity and are used to screen a large candidate hypothetical data set of more than 800 000 polymer-dopant combinations. Promising candidates are identified for synthesis and device fabrication. Additionally, new design guidelines are extracted that verify and extend knowledge on important molecular fragments that correlate to high conductivity. Conductivity prediction models are also deployed at www.polymergenome.org for broader open-access community use.

Molecular Encapsulation of Naphthalene Diimide (NDI) Based π-Conjugated Polymers: A Tool for Understanding Photoluminescence

Conjugated polymers are an important class of chromophores for optoelectronic devices. Understanding and controlling their excited state properties, in particular, radiative and non‐radiative recombination processes are among the greatest challenges that must be overcome. We report the synthesis and characterization of a molecularly encapsulated naphthalene diimide‐based polymer, one of the most successfully used motifs, and explore its structural and optical properties. The molecular encapsulation enables a detailed understanding of the effect of interpolymer interactions. We reveal that the non‐encapsulated analogue P(NDI‐2OD‐T) undergoes aggregation enhanced emission; an effect that is suppressed upon encapsulation due to an increasing π‐interchain stacking distance. This suggests that decreasing π‐stacking distances may be an attractive method to enhance the radiative properties of conjugated polymers in contrast to the current paradigm where it is viewed as a source of optical quenching.

Butterfly-Like Triarylamines with High Hole Mobility and On/Off Ratio in Bottom-Gated OFETs

Highly π-extended butterfly-shaped triarylamine dyads with aryleneethynylene spacer were constructed using an efficient synthetic route. These aryleneethynylene-bridged dyads are highly fluorescent and exhibited high HOMO levels, and low bandgaps, which are suitable for high-performance p-type OFETs. The field-effect transistors were fabricated through a solution-processable method and exhibited promising p-type performance with field-effect mobility up to 4.3 cm² /Vs and high I_on/off of 10⁸ under ambient conditions.

Fused Bithiophene Imide Dimer-Based n-Type Polymers for High-Performance Organic Electrochemical Transistors

The development of n-type organic electrochemical transistors (OECTs) lags far behind their p-type counterparts. In order to address this dilemma, we report here two new fused bithiophene imide dimer (f-BTI2)-based n-type polymers with a branched methyl end-capped glycol side chain, which exhibit good solubility, low-lying LUMO energy levels, favorable polymer chain orientation, and efficient ion transport property, thus yielding a remarkable OECT electron mobility (μ_e ) of up to ≈10^-2  cm²  V^-1  s^-1 and volumetric capacitance (C*) as high as 443 F cm^-3 , simultaneously. As a result, the f-BTI2TEG-FT-based OECTs deliver a record-high maximum geometry-normalized transconductance of 4.60 S cm^-1 and a maximum μC* product of 15.2 F cm^-1  V^-1  s^-1 . The μC* figure of merit is more than one order of magnitude higher than that of the state-of-the-art n-type OECTs. The emergence of f-BTI2TEG-FT brings a new paradigm for developing high-performance n-type polymers for low-power OECT applications.

Programmable Assembly of π-Conjugated Polymers

π-Conjugated polymers have numerous applications due to their advantageous optoelectronic and mechanical properties. These properties depend intrinsically on polymer ordering, including crystallinity, orientation, morphology, domain size, and π-π interactions. Programming, or deliberately controlling the composition and ordering of π-conjugated polymers by well-defined inputs, is a key facet in the development of organic electronics. Here, π-conjugated programming is described at each stage of material development, stressing the links between each programming mode. Covalent programming is performed during polymer synthesis such that complex architectures can be constructed, which direct polymer assembly by governing polymer orientation, π-π interactions, and morphological length-scales. Solution programming is performed in a solvated state as polymers dissolve, aggregate, crystallize, or react in solution. Solid-state programming occurs in the solid state and is governed by polymer crystallization, domain segregation, or gelation. Recent progress in programming across these stages is examined, highlighting order-dependent features and assembly techniques that are unique to π-conjugated polymers. This should serve as a guide for delineating the many ways of directing π-conjugated polymer assembly to control ordering, structure, and function, enabling the further development of organic electronics.

Understanding Interface Dipoles at an Electron Transport Material/Electrode Modifier for Organic Electronics

Interface dipoles formed at an electrolyte/electrode interface have been widely studied and interpreted using the "double dipole step" model, where the dipole vector is determined by the size and/or range of motion of the charged ions. Some electron transport materials (ETMs) with lone pairs of electrons on heteroatoms exhibit a similar interfacial behavior. However, the origin of the dipoles in such materials has not yet been explored in great depth. Herein, we systematically investigate the influence of the lone pair of electrons on the interface dipole through three pyridine derivatives B2-B4PyMPM. Experiments show that different positions of nitrogen atoms in the three materials give rise to different hydrogen bonds and molecular orientations, thereby affecting the areal density and direction of the lone pair of electrons. The interface dipoles of the three materials predicted by the "double dipole step" model are in good agreement with the ultraviolet photoelectron spectroscopy results both in spin-coated and vacuum-deposited films. These findings help to better understand the ETMs/electrode interfacial behaviors and provide new guidelines for the molecular design of the interlayer.

Sweet Electronics: Honey-Gated Complementary Organic Transistors and Circuits Operating in Air

Sustainable harnessing of natural resources is key moving toward a new-generation electronics, which features a unique combination of electronic functionality, low cost, and absence of environmental and health hazards. Within this framework, edible electronics, of which transistors and circuits are a fundamental component, is an emerging field, exploiting edible materials that can be safely ingested, and subsequently digested after performing their function. Dielectrics are a critical functional element of transistors, often constituting their major volume. Yet, to date, there are only scarce examples of electrolytic food-based materials able to provide low-voltage operation of transistors at ambient conditions. In this context, a cost-effective and edible substance, honey, is proposed to be used as an electrolytic gate viscous dielectric in electrolyte-gated organic field-effect transistors (OFETs). Both n- and p-type honey-gated OFETs (HGOFETs) are demonstrated, with distinctive features such as low voltage (<1 V) operation, long-term shelf life and operation stability in air, and compatibility with large-area fabrication processes, such as inkjet printing on edible tattoo-paper. Such complementary devices enable robust honey-based integrated logic circuits, here exemplified by inverting logic gates and ring oscillators. A marked device responsivity to humidity provides promising opportunities for sensing applications, specifically, for moisture control of dried or dehydrated food.

An organic transistor matrix for multipoint intracellular action potential recording

Electrode arrays are widely used for multipoint recording of electrophysiological activities, and organic electronics have been utilized to achieve both high performance and biocompatibility. However, extracellular electrode arrays record the field potential instead of the membrane potential itself, resulting in the loss of information and signal amplitude. Although much effort has been dedicated to developing intracellular access methods, their three-dimensional structures and advanced protocols prohibited implementation with organic electronics. Here, we show an organic electrochemical transistor (OECT) matrix for the intracellular action potential recording. The driving voltage of sensor matrix simultaneously causes electroporation so that intracellular action potentials are recorded with simple equipment. The amplitude of the recorded peaks was larger than that of an extracellular field potential recording, and it was further enhanced by tuning the driving voltage and geometry of OECTs. The capability of miniaturization and multiplexed recording was demonstrated through a 4 × 4 action potential mapping using a matrix of 5- × 5-μm² OECTs. Those features are realized using a mild fabrication process and a simple circuit without limiting the potential applications of functional organic electronics.