Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells

Sodium alginate hydrogel, stabilized with gelatin, is a suitable, biologically inert matrix that can be used for encapsulating and 3D bioprinting of bone-related SaOS-2 cells. However, the cells, embedded in this matrix, remain in a non-proliferating state. Here we show that addition of an overlay onto the bioprinted alginate/gelatine/SaOS-2 cell scaffold, consisting of agarose and the calcium salt of polyphosphate [polyP·Ca(2+)-complex], resulted in a marked increase in cell proliferation. In the presence of 100 μm polyP·Ca(2+)-complex, the cells proliferate with a generation time of approximately 47-55 h. In addition, the hardness of the alginate/gelatin hydrogel substantially increases in the presence of the polymer. The reduced Young's modulus for the alginate/gelatin hydrogel is approximately 13-14 kPa, and this value drops to approximately 0.5 kPa after incubation of the cell containing scaffolds for 5 d. In the presence of 100 μm polyP·Ca(2+)-complex, the reduced Young's modulus increases to about 22 kPa. The hardness of the polyP·Ca(2+)-complex containing hydrogel remains essentially constant if cells are absent in the matrix, but it drops to 3.2 kPa after a 5 d incubation period in the presence of SaOS-2 cells, indicating that polyP·Ca(2+)-complex becomes metabolized, degraded, by the cells. The alginate/gelatine-agarose system with polyP·Ca(2+)-complex cause a significant increase in the mineralization of the cells. SEM analyses revealed that the morphology of the mineral nodules formed on the surface of the cells embedded in the alginate/gelatin hydrogel do not significantly differ from the nodules on cells growing in monolayer cultures. The newly developed technique, using cells encapsulated into an alginate/gelatin hydrogel and a secondary layer containing the morphogenetically active, growth promoting polymer polyP·Ca(2+)-complex opens new possibilities for the application of 3D bioprinting in bone tissue engineering.

Biocalcite, a multifunctional inorganic polymer: Building block for calcareous sponge spicules and bioseed for the synthesis of calcium phosphate-based bone

Calcium carbonate is the material that builds up the spicules of the calcareous sponges. Recent results revealed that the calcium carbonate/biocalcite-based spicular skeleton of these animals is formed through an enzymatic mechanism, such as the skeleton of the siliceous sponges, evolutionarily the oldest animals that consist of biosilica. The enzyme that mediates the calcium carbonate deposition has been identified as a carbonic anhydrase (CA) and has been cloned from the calcareous sponge species Sycon raphanus. Calcium carbonate deposits are also found in vertebrate bones besides the main constituent, calcium phosphate/hydroxyapatite (HA). Evidence has been presented that during the initial phase of HA synthesis poorly crystalline carbonated apatite is deposited. Recent data summarized here indicate that during early bone formation calcium carbonate deposits enzymatically formed by CA, act as potential bioseeds for the precipitation of calcium phosphate mineral onto bone-forming osteoblasts. Two different calcium carbonate phases have been found during CA-driven enzymatic calcium carbonate deposition in in vitro assays: calcite crystals and round-shaped vaterite deposits. The CA provides a new target of potential anabolic agents for treatment of bone diseases; a first CA activator stimulating the CA-driven calcium carbonate deposition has been identified. In addition, the CA-driven calcium carbonate crystal formation can be frozen at the vaterite state in the presence of silintaphin-2, an aspartic acid/glutamic acid-rich sponge-specific protein. The discovery that calcium carbonate crystals act as bioseeds in human bone formation may allow the development of novel biomimetic scaffolds for bone tissue engineering. Na-alginate hydrogels, enriched with biosilica, have recently been demonstrated as a suitable matrix to embed bone forming cells for rapid prototyping bioprinting/3D cell printing applications.

Modulation of the initial mineralization process of SaOS-2 cells by carbonic anhydrase activators and polyphosphate

Ca-phosphate/hydroxyapatite (HA) crystals constitute the mineral matrix of vertebrate bones, while Ca-carbonate is the predominant mineral of many invertebrates, like mollusks. Recent results suggest that CaCO₃ is also synthesized during early bone formation. We demonstrate that carbonic anhydrase-driven CaCO₃ formation in vitro is activated by organic extracts from the demosponge Suberites domuncula as well as by quinolinic acid, one component isolated from these extracts. Further results revealed that the stimulatory effect of bicarbonate (HCO₃ (-)) ions on mineralization of osteoblast-like SaOS-2 cells is strongly enhanced if the cells are exposed to inorganic polyphosphate (polyP), a linear polymer of phosphate linked by energy-rich phosphodiester bonds. The effect of polyP, administered as polyP (Ca²⁺ salt), on HA formation was found to be amplified by addition of the carbonic anhydrase-activating sponge extract or quinolinic acid. Our results support the assumption that CaCO₃ deposits, acting as bio-seeds for Ca-carbonated phosphate formation, are formed as an intermediate during HA mineralization and that the carbonic anhydrase-mediated formation of those deposits is under a positive-negative feedback control by bone alkaline phosphatase-dependent polyP metabolism, offering new targets for therapy of bone diseases/defects.

Isoquercitrin and polyphosphate co-enhance mineralization of human osteoblast-like SaOS-2 cells via separate activation of two RUNX2 cofactors AFT6 and Ets1

Isoquercitrin, a dietary phytoestrogen, is a potential stimulator of bone mineralization used for prophylaxis of osteoporotic disorders. Here we studied the combined effects of isoquercitrin, a cell membrane permeable 3-O-glucoside of quercetin, and polyphosphate [polyP], a naturally occurring inorganic polymer inducing bone formation, on mineralization of human osteoblast-like SaOS-2 cells. Both compounds isoquercitrin and polyP induce at non-toxic concentrations the mineralization process of SaOS-2 cells. Co-incubation experiments revealed that isoquercitrin (at 0.1 and 0.3μM), if given simultaneously with polyP (as Ca(2+) salt; at 3, 10, 30 and 100μM) amplifies the mineralization-enhancing effect of the inorganic polymer. The biomineralization process induced by isoquercitrin and polyP is based on two different modes of action. After incubation of the cells with isoquercitrin or polyP the expression of the Runt-related transcription factor 2 [RUNX2] is significantly upregulated. In addition, isoquercitrin causes a strong increase of the steady-state-levels of the two co-activators of RUNX2, the activating transcription factor 6 [ATF6] and the Ets oncogene homolog 1 [Ets1]. The activating effect of isoquercitrin occurs via a signal transduction pathway involving ATF6, and by that, is independent from the induction cascade initiated by polyP. This conclusion is supported by the finding that isoquercitrin upregulates the expression of the gene encoding for osteocalcin, while polyP strongly increases the expression of the Ets1 gene and of the alkaline phosphatase. We show that the two compounds, polyP and isoquercitrin, have a co-enhancing effect on bone mineral formation and in turn might be of potential therapeutic value for prevention/treatment of osteoporosis.

The marine sponge-derived inorganic polymers, biosilica and polyphosphate, as morphogenetically active matrices/scaffolds for the differentiation of human multipotent stromal cells: potential application in 3D printing and distraction osteogenesis

The two marine inorganic polymers, biosilica (BS), enzymatically synthesized from ortho-silicate, and polyphosphate (polyP), a likewise enzymatically synthesized polymer consisting of 10 to >100 phosphate residues linked by high-energy phosphoanhydride bonds, have previously been shown to display a morphogenetic effect on osteoblasts. In the present study, the effect of these polymers on the differential differentiation of human multipotent stromal cells (hMSC), mesenchymal stem cells, that had been encapsulated into beads of the biocompatible plant polymer alginate, was studied. The differentiation of the hMSCs in the alginate beads was directed either to the osteogenic cell lineage by exposure to an osteogenic medium (mineralization activation cocktail; differentiation into osteoblasts) or to the chondrogenic cell lineage by incubating in chondrocyte differentiation medium (triggering chondrocyte maturation). Both biosilica and polyP, applied as Ca²⁺ salts, were found to induce an increased mineralization in osteogenic cells; these inorganic polymers display also morphogenetic potential. The effects were substantiated by gene expression studies, which revealed that biosilica and polyP strongly and significantly increase the expression of bone morphogenetic protein 2 (BMP-2) and alkaline phosphatase (ALP) in osteogenic cells, which was significantly more pronounced in osteogenic versus chondrogenic cells. A differential effect of the two polymers was seen on the expression of the two collagen types, I and II. While collagen Type I is highly expressed in osteogenic cells, but not in chondrogenic cells after exposure to biosilica or polyP, the upregulation of the steady-state level of collagen Type II transcripts in chondrogenic cells is comparably stronger than in osteogenic cells. It is concluded that the two polymers, biosilica and polyP, are morphogenetically active additives for the otherwise biologically inert alginate polymer. It is proposed that alginate, supplemented with polyP and/or biosilica, is a suitable biomaterial that promotes the growth and differentiation of hMSCs and might be beneficial for application in 3D tissue printing of hMSCs and for the delivery of hMSCs in fractures, surgically created during distraction osteogenesis.

Enzyme-accelerated and structure-guided crystallization of calcium carbonate: role of the carbonic anhydrase in the homologous system

The calcareous spicules from sponges, e.g. from Sycon raphanus, are composed of almost pure calcium carbonate. In order to elucidate the formation of those structural skeletal elements, the function of the enzyme carbonic anhydrase (CA), isolated from this species, during the in vitro calcium carbonate-based spicule formation, was investigated. It is shown that the recombinant sponge CA substantially accelerates calcium carbonate formation in the in vitro diffusion assay. A stoichiometric calculation revealed that the turnover rate of the sponge CA during the calcification process amounts to 25 CO2s(-1) × molecule CA(-1). During this enzymatically driven process, initially pat-like particles are formed that are subsequently transformed to rhomboid/rhombohedroid crystals with a dimension of ~50 μm. The CA-catalyzed particles are smaller than those which are formed in the absence of the enzyme. The Martens hardness of the particles formed is ~4 GPa, a value which had been determined for other biogenic calcites. This conclusion is corroborated by energy-dispersive X-ray spectroscopy, which revealed that the particles synthesized are composed predominantly of the elements calcium, oxygen and carbon. Surprising was the finding, obtained by light and scanning electron microscopy, that the newly formed calcitic crystals associate with the calcareous spicules from S. raphanus in a highly ordered manner; the calcitic crystals almost perfectly arrange in an array orientation along the two opposing planes of the spicules, leaving the other two plane arrays uncovered. It is concluded that the CA is a key enzyme controlling the calcium carbonate biomineralization process, which directs the newly formed particles to existing calcareous spicular structures. It is expected that with the given tools new bioinspired materials can be fabricated.

Carbonic anhydrase: a key regulatory and detoxifying enzyme for Karst plants

Karstification is a rapid process during which calcidic stones/limestones undergo dissolution with the consequence of a desertification of karst regions. A slow-down of those dissolution processes of Ca-carbonate can be approached by a reforestation program using karst-resistant plants that can resist alkaline pH and higher bicarbonate (HCO₃⁻) concentrations in the soil. Carbonic anhydrases (CA) are enzymes that mediate a rapid and reversible interconversion of CO₂ and HCO₃⁻. In the present study, the steady-state expression of a CA gene, encoding for the plant carbonic anhydrase from the parsley Petroselinum crispum, is monitored. The studies were primarily been performed during germination of the seeds up to the 12/14-day-old embryos. The CA cDNA was cloned. Quantitative polymerase chain reaction (qPCR) analysis revealed that the gene expression level of the P. crispum CA is strongly and significantly affected at more alkaline pH in the growth medium (pH 8.3). This abolishing effect is counteracted both by addition of HCO₃⁻ and by addition of polyphosphate (polyP) to the culture medium. In response to polyP, the increased pH in the vacuoles of the growing plants is normalized. The effect of polyP let us to propose that this polymer acts as a buffer system that facilitates the adjustment of the pH in the cytoplasm. In addition, it is proposed that polyP has the potential to act, especially in the karst, as a fertilizer that allows the karstic plants to cope with the adverse pH and HCO₃⁻ condition in the soil.

Dissection of the structure-forming activity from the structure-guiding activity of silicatein: a biomimetic molecular approach to print optical fibers

The enzymatically inactive silicatein was used as the platform for the enzymatically active silicatein, which synthesized the silica waveguide.

A novel TiO2-assisted magnetic nanoparticle separator for treatment and inactivation of bacterial contaminants in aquatic systems

The photocatalytic method and the magnetic nanoparticle separator, described here, allow a fast and efficient elimination of bacteria from aqueous solution and can be applied for remediation of aquatic environments.

Polyoxometalates active against tumors, viruses, and bacteria

Polyoxometalates (PMs) as discrete metal-oxide cluster anions with high solubility in water and photochemically and electrochemically active property have a wide variety of structures not only in molecular size from sub-nano to sub-micrometers with a various combination of metals but also in symmetry and highly negative charge. One of the reasons for such a structural variety originates from their conformation change (due to the condensed aggregation and the structural assembly) which strongly depends on environmental parameters such as solution pH, concentration, and coexistent foreign inorganic and/or organic substances. In the course of the application of the physicochemical properties of such PMs to the medical fields, antitumoral, antiviral, and antibacterial activities have been developed for realization of a novel inorganic medicine which provides a biologically excellent activity never replaced by other approved medicines. Several PMs as a candidate for clinical uses have been licensed toward the chemotherapy of solid tumors (such as human gastric cancer and pancreatic cancer), DNA and RNA viruses (such as HSV, HIV, influenza, and SARS), and drug-resistant bacteria (such as MRSA and VRSA) in recent years: [NH3Pr(i)]6[Mo7O24]∙3H2O (PM-8) and [Me3NH]6[H2Mo(V) 12O28(OH)12(Mo(VI)O3)4]∙2H2O (PM-17) for solid tumors; K7[PTi2W10O40]∙6H2O (PM-19), [Pr(i)NH3]6H[PTi2W10O38(O2)2]∙H2O (PM-523), and K11H[(VO)3(SbW9O33)2]∙27H2O (PM-1002) for viruses; and K6[P2W18O62]∙14H2O (PM-27), K4[SiMo12O40]∙3H2O (SiMo12), and PM-19 for MRSA and VRSA. The results are discussed from a point of view of the chemotherapeutic clarification in this review.

The enzyme carbonic anhydrase as an integral component of biogenic Ca-carbonate formation in sponge spicules

The inorganic scaffold of the spicules, the skeletal elements of the calcareous sponges, is formed of calcium carbonate (CaCO3). The growth of the approximately 300-μm large spicules, such as those of the calcareous sponge Sycon raphanus used in the present study, is a rapid process with a rate of about 65 μm/h. The formation of CaCO3 is predominantly carried out by the enzyme carbonic anhydrase (CA). The enzyme from the sponge S. raphanus was isolated and prepared by recombination. The CA-driven deposition of CaCO3 crystallites is dependent on temperature (optimal at 52 °C), the pH value of the reaction assay (7.5/8.0), and the substrate concentration (CO2 and Ca(2+)). During the initial phase of crystallite formation, ≈40 μm large round-shaped deposits are formed that remodel to larger prisms. These crystal-like prisms associate to each other and form either rope-/bundle-like aggregates or arrange perfectly with their smaller planes along opposing surfaces of the sponge spicule rays. The CA-dependent CaCO3 deposition can be inhibited by the CA-specific inhibitor acetazolamide. The Michaelis-Menten constant for the CA-driven mineralization has been determined to be around 8 mM with respect to CaCO3. The deposits formed have a Martens hardness of ≈5 GPa. The data presented here highlights for the first time that calcite deposition in the sponge system is decisively controlled enzymatically. This data will contribute to the development of new strategies applicable for the fabrication of novel biomaterials.

Induction of carbonic anhydrase in SaOS-2 cells, exposed to bicarbonate and consequences for calcium phosphate crystal formation

Ca-phosphate/hydroxyapatite crystals constitute the mineralic matrix of vertebrate bones, while Ca-carbonate dominates the inorganic matrix of otoliths. In addition, Ca-carbonate has been identified in lower percentage in apatite crystals. By using the human osteogenic SaOS-2 cells it could be shown that after exposure of the cells to Ca-bicarbonate in vitro, at concentrations between 1 and 10 mm, a significant increase of Ca-deposit formation results. The crystallite nodules formed on the surfaces of SaOS-2 cells become denser and larger in the presence of bicarbonate if simultaneously added together with the mineralization activation cocktail (β-glycerophosphate/ascorbic acid/dexamethasone). In parallel, with the increase of Ca-deposit formation, the expression of the carbonic anhydrase-II (CA-II) gene becomes upregulated. This effect, measured on transcriptional level is also substantiated by immunohistological studies. The stimulatory effect of bicarbonate on Ca-deposit formation is prevented if the carbonic anhydrase inhibitor acetazolamide is added to the cultures. Mapping the surface of the Ca-deposit producing SaOS-2 cells by scanning electron microscopy coupled with energy-dispersive X-ray analysis revealed an accumulation of the signals for the element carbon and, as expected, also for phosphorus. Finally, it is shown that ortho-phosphate and hydrolysis products of polyphosphate inhibit CA-II activity, suggesting a feedback regulatory system between the CA-driven Ca-carbonate deposition and a subsequent inactivation of this process by ortho-phosphate. Based on the presented data we suggest that Ca-carbonate deposits act as bioseeds for a downstream Ca-phosphate deposition process. We propose that activators for CA, especially for CA-II, might be beneficial for the treatment of bone deficiency diseases.

Cryptochrome in sponges: a key molecule linking photoreception with phototransduction

Sponges (phylum: Porifera) react to external light or mechanical signals with contractile or metabolic reactions and are devoid of any nervous or muscular system. Furthermore, elements of a photoreception/phototransduction system exist in those animals. Recently, a cryptochrome-based photoreceptor system has been discovered in the demosponge. The assumption that in sponges the siliceous skeleton acts as a substitution for the lack of a nervous system and allows light signals to be transmitted through its glass fiber network is supported by the findings that the first spicules are efficient light waveguides and the second sponges have the enzymatic machinery for the generation of light. Now, we have identified/cloned in Suberites domuncula two additional potential molecules of the sponge cryptochrome photoreception system, the guanine nucleotide-binding protein β subunit, related to β-transducin, and the nitric oxide synthase (NOS)-interacting protein. Cryptochrome and NOSIP are light-inducible genes. The studies show that the NOS inhibitor L-NMMA impairs both morphogenesis and motility of the cells. Finally, we report that the function of primmorphs to produce reactive nitrogen species can be abolished by a NOS inhibitor. We propose that the sponge cryptochrome-based photoreception system, through which photon signals are converted into radicals, is coupled to the NOS apparatus.

In vivo ozone exposure does not increase DNA single-strand breaks in human peripheral lymphocytes

In this randomized parallel study, we examined whether an acute ozone (O3) exposure leads to increased DNA strand breaks in human lymphocytes. The groups were exposed to 0.21 ppm O3 or filtered air for two hours. 30min and 4.5 h after exposure, DNA damage was determined in isolated lymphocytes using the Fast Micromethod. There was no detectable effect after O3 exposure. We conclude that an acute O3 exposure at the tested concentration does not lead to persistent DNA damage.

Principles of biofouling protection in marine sponges: a model for the design of novel biomimetic and bio-inspired coatings in the marine environment?

The process of biofouling of marine structures and substrates, such as platforms or ship hulls, proceeds in multiple steps. Soon after the formation of an initial conditioning film, formed via the adsorption of organic particles to natural or man-made substrates, a population of different bacterial taxa associates under the formation of a biofilm. These microorganisms communicate through a complex quorum sensing network. Macro-foulers, e.g., barnacles, then settle and form a fouling layer on the marine surfaces, a process that globally has severe impacts both on the economy and on the environment. Since the ban of tributyltin, an efficient replacement of this antifouling compound by next-generation antifouling coatings that are environmentally more acceptable and also showing longer half-lives has not yet been developed. The sponges, as sessile filter-feeder animals, have evolved antifouling strategies to protect themselves against micro- and subsequent macro-biofouling processes. Experimental data are summarized and suggest that coating of the sponge surface with bio-silica contributes to the inhibition of the formation of a conditioning film. A direct adsorption of the surfaces by microorganisms can be impaired through poisoning the organisms with direct-acting secondary metabolites or toxic peptides. In addition, first, compounds from sponges have been identified that interfere with the anti-quorum sensing network. Sponge secondary metabolites acting selectively on diatom colonization have not yet been identified. Finally, it is outlined that direct-acting secondary metabolites inhibiting the growth of macro-fouling animals and those that poison the multidrug resistance pump are available. It is concluded that rational screening programs for inhibitors of the complex and dynamic problem of biofilm production, based on multidisciplinary studies and using sponges as a model, are required in the future.

Bacterial sensors based on biosilica immobilization for label-free OWLS detection

In the last years, a new group of enzymes, the so-called silicateins, have been identified and characterized, which form the axial filaments of the spicules of the siliceous sponges, consisting of not only amorphous silica among others. These enzymes are able to catalyze the polycondensation and deposition of silica at mild conditions. Silicateins can be expressed in Escherichia coli. The recombinant proteins are expressed on the surface of the cell wall and are able to catalyze the formation of a polysilicate net around the bacterial cells providing the possibility for further attachment to the surface of SiO2 containing sensor chips. With this mild immobilization process it is now possible to prepare novel microbial sensors based on Optical Waveguide Lightmode Spectroscopy. In the present study, the immobilization of silicatein modified E. coli BL21AI cells onto the SiO2-type chips was optimized (buffer concentration, pH, temperature, reaction time, and so on) and then the biological properties, in particular the inhibitory effect of stressors/environmental pollutants on the novel bacterial sensor were studied in real time. The effect of oxidative stress was investigated by exposing the sensors containing biosilica-immobilized E. coli BL21AI cells to various concentrations of hydrogen peroxide. The effect of antibiotics was tested using chloramphenicol (CAP) which is effective against a variety of Gram-positive and Gram-negative bacteria and penicillin G which destroys the bacterial cell wall. In addition, the inhibition by carbofuran (CF) pesticide was also tested. CF is a highly toxic compound which inhibits cholinesterase activity. According our results we can conclude that the novel bacterial sensor consisting of the silicatein modified E. coli BL21AI cells immobilized on OWLS sensor surface could be an effective tool to detect the presence of different type of pollutants in real time measurement. However penicillin G and CF are not specifically inhibitors of E. coli strain, but some inhibitory effect could be still determined beside the well expressed signals for H2O2 and CAP obtained with the novel microbial sensor.

Silicateins--a novel paradigm in bioinorganic chemistry: enzymatic synthesis of inorganic polymeric silica

The inorganic matrix of the siliceous skeletal elements of sponges, that is, spicules, is formed of amorphous biosilica. Until a decade ago, it remained unclear how the hard biosilica monoliths of the spicules are formed in sponges that live in a silica-poor (<50 μM) aquatic environment. The following two discoveries caused a paradigm shift and allowed an elucidation of the processes underlying spicule formation; first the discovery that in the spicules only one major protein, silicatein, exists and second, that this protein displays a bio-catalytical, enzymatic function. These findings caused a paradigm shift, since silicatein is the first enzyme that catalyzes the formation of an inorganic polymer from an inorganic monomeric substrate. In the present review the successive steps, following the synthesis of the silicatein product, biosilica, and resulting in the formation of the hard monolithic spicules is given. The new insight is assumed to open new horizons in the field of biotechnology and also in biomedicine.

Self-healing, an intrinsic property of biomineralization processes

The sponge siliceous spicules are formed enzymatically via silicatein, in contrast to other siliceous biominerals. Originally, silicatein had been described as a major structural protein of the spicules that has the property to allow a specific deposition of silica onto their surface. More recently, it had been unequivocally demonstrated that silicatein displays a genuine enzyme activity, initiating and maintaining silica biopolycondensation at low precursor concentrations (<2 mM). Even more, as silicatein becomes embedded into the biosilica polymer, formed by the enzyme, it retains its functionality to enable a controlled biosilica deposition. The protection of silicatein through the biosilica mantel is so strong that it conserves the functionality of the enzyme for thousands of years. The implication of this finding, the preservation of the enzyme function over such long time periods, is that the intrinsic property of silicatein to display its enzymatic activity remains in the biosilica deposits. This self-healing property of sponge biosilica can be utilized to engineer novel hybrid materials, with silicatein as a functional template, which are more resistant toward physical stress and fracture. Those hybrid materials can even be used for the fabrication of silica dielectrics coupled to optical nanowires.

The deep-sea natural products, biogenic polyphosphate (Bio-PolyP) and biogenic silica (Bio-Silica), as biomimetic scaffolds for bone tissue engineering: fabrication of a morphogenetically-active polymer

Bone defects in human, caused by fractures/nonunions or trauma, gain increasing impact and have become a medical challenge in the present-day aging population. Frequently, those fractures require surgical intervention which ideally relies on autografts or suboptimally on allografts. Therefore, it is pressing and likewise challenging to develop bone substitution materials to heal bone defects. During the differentiation of osteoblasts from their mesenchymal progenitor/stem cells and of osteoclasts from their hemopoietic precursor cells, a lineage-specific release of growth factors and a trans-lineage homeostatic cross-talk via signaling molecules take place. Hence, the major hurdle is to fabricate a template that is functioning in a way mimicking the morphogenetic, inductive role(s) of the native extracellular matrix. In the last few years, two naturally occurring polymers that are produced by deep-sea sponges, the biogenic polyphosphate (bio-polyP) and biogenic silica (bio-silica) have also been identified as promoting morphogenetic on both osteoblasts and osteoclasts. These polymers elicit cytokines that affect bone mineralization (hydroxyapatite formation). In this manner, bio-silica and bio-polyP cause an increased release of BMP-2, the key mediator activating the anabolic arm of the hydroxyapatite forming cells, and of RANKL. In addition, bio-polyP inhibits the progression of the pre-osteoclasts to functionally active osteoclasts. Based on these findings, new bioinspired strategies for the fabrication of bone biomimetic templates have been developed applying 3D-printing techniques. Finally, a strategy is outlined by which these two morphogenetically active polymers might be used to develop a novel functionally active polymer.

Silicate modulates the cross-talk between osteoblasts (SaOS-2) and osteoclasts (RAW 264.7 cells): inhibition of osteoclast growth and differentiation

It has been shown that inorganic monomeric and polymeric silica/silicate, in the presence of the biomineralization cocktail, increases the expression of osteoprotegerin (OPG) in osteogenic SaOS-2 sarcoma cells in vitro. In contrast, silicate does not affect the steady-state gene expression level of the osteoclastogenic ligand receptor activator of NF-κB ligand (RANKL). In turn it can be expected that the concentration ratio of the mediators OPG/RANKL increases in the presence of silicate. In addition, silicate enhances the growth potential of SaOS-2 cells in vitro, while it causes no effect on RAW 264.7 cells within a concentration range of 10-100 µM. Applying a co-cultivation assay system, using SaOS-2 cells and RAW 264.7 cells, it is shown that in the presence of 10 µM silicate the number of RAW 264.7 cells in general, and the number of TRAP(+) RAW 264.7 cells in particular markedly decreases. The SaOS-2 cells retain their capacity of differential gene expression of OPG and RANKL in favor of OPG after exposure to silicate. It is concluded that after exposure of the cells to silicate a factor(s) is released from SaOS-2 cells that causes a significant inhibition of osteoclastogenesis of RAW 264.7 cells. It is assumed that it is an increased secretion of the cytokine OPG that is primarily involved in the reduction of the osteoclastogenesis of the RAW 264.7 cells. It is proposed that silicate might have the potential to stimulate osteogenesis in vivo and perhaps to ameliorate osteoporotic disorders.