Local Intra-arterial Thrombolysis during Mechanical Thrombectomy for Refractory Large-Vessel Occlusion: Adjunctive Chemical Enhancer of Thrombectomy

BACKGROUND AND PURPOSE

Data on adjunctive intra-arterial thrombolysis during mechanical thrombectomy for refractory thrombus are sparse. The aim of this study was to evaluate the efficacy and safety of local intra-arterial urokinase as an adjunct to mechanical thrombectomy for refractory large-vessel occlusion.

MATERIALS AND METHODS

We retrospectively evaluated patients with acute ischemic stroke who underwent mechanical thrombectomy for anterior circulation large-vessel occlusion between January 2016 and December 2019. Patients were divided into 2 groups based on the use of intra-arterial urokinase as an adjunctive therapy during mechanical thrombectomy for refractory thrombus: the urokinase and nonurokinase groups. Herein, refractory thrombus was defined as the target occlusion with minimal reperfusion (TICI 0 or 1) despite >3 attempts with conventional mechanical thrombectomy. The baseline characteristics, procedural outcomes, and clinical outcome were compared between the 2 groups.

RESULTS

One hundred fourteen cases of refractory thrombus were identified. A total of 45 and 69 patients were in the urokinase and the nonurokinase groups, respectively. The urokinase group compared with the nonurokinase group showed a higher rate of successful reperfusion (82.2% versus 63.8%, P = .034), with lower procedural times (54 versus 69 minutes, P = .137). The rates of good clinical outcome, distal embolism, and symptomatic intracranial hemorrhage were similar between the 2 groups. The use of intra-arterial urokinase (OR = 3.682; 95% CI, 1.156-11.730; P = .027) was an independent predictor of successful reperfusion.

CONCLUSIONS

The use of local intra-arterial urokinase as an adjunct to mechanical thrombectomy may be an effective and safe method that provides better recanalization than the conventional mechanical thrombectomy for refractory thrombus in patients with embolic large-vessel occlusion.

Constraints on the Initial State of Pb-Pb Collisions via Measurements of Z-Boson Yields and Azimuthal Anisotropy at sqrt[s_{NN}]=5.02 TeV

The CMS experiment at the LHC has measured the differential cross sections of Z bosons decaying to pairs of leptons, as functions of transverse momentum and rapidity, in lead-lead collisions at a nucleon-nucleon center-of-mass energy of 5.02  TeV. The measured Z boson elliptic azimuthal anisotropy coefficient is compatible with zero, showing that Z bosons do not experience significant final-state interactions in the medium produced in the collision. Yields of Z bosons are compared to Glauber model predictions and are found to deviate from these expectations in peripheral collisions, indicating the presence of initial collision geometry and centrality selection effects. The precision of the measurement allows, for the first time, for a data-driven determination of the nucleon-nucleon integrated luminosity as a function of lead-lead centrality, thereby eliminating the need for its estimation based on a Glauber model.

Battery-free, wireless soft sensors for continuous multi-site measurements of pressure and temperature from patients at risk for pressure injuries

Capabilities for continuous monitoring of pressures and temperatures at critical skin interfaces can help to guide care strategies that minimize the potential for pressure injuries in hospitalized patients or in individuals confined to the bed. This paper introduces a soft, skin-mountable class of sensor system for this purpose. The design includes a pressure-responsive element based on membrane deflection and a battery-free, wireless mode of operation capable of multi-site measurements at strategic locations across the body. Such devices yield continuous, simultaneous readings of pressure and temperature in a sequential readout scheme from a pair of primary antennas mounted under the bedding and connected to a wireless reader and a multiplexer located at the bedside. Experimental evaluation of the sensor and the complete system includes benchtop measurements and numerical simulations of the key features. Clinical trials involving two hemiplegic patients and a tetraplegic patient demonstrate the feasibility, functionality and long-term stability of this technology in operating hospital settings.

Phosphorylation of OGFOD1 by Cell Cycle-Dependent Kinase 7/9 Enhances the Transcriptional Activity of RNA Polymerase II in Breast Cancer Cells

Simple Summary

Among the causes of accelerating cancer properties, dysregulated transcription is considerably prominent in many cancers. However, it is difficult to target transcriptional machineries due to their fundamental importance. Compared to breast cancer cell lines, we found that OGFOD1 aggravates cancers by enhancing RNA polymerase II transcriptional activity and it is improved by cell cycle-dependent kinases. Overall, we uncovered the novel mechanism for how OGFOD1 maliciously functions in breast cancers, suggesting it as a rational cancer treatment target protein.

Abstract

2-oxoglutarate and iron-dependent oxygenase domain-containing protein 1 (OGFOD1) expression is upregulated in a variety of cancers and has been related to poor prognosis. However, despite this significance to cancer progression, the precise oncogenic mechanism of OGFOD1 is not understood. We demonstrated that OGFOD1 plays a role in enhancing the transcriptional activity of RNA polymerase II in breast cancer cells. OGFOD1 directly binds to the C-terminal domain of RNA polymerase II to alter phosphorylation status. The elimination of OGFOD1 resulted in decreased tumor development. Additionally, cell cycle-dependent kinase 7 and cell cycle-dependent kinase 9, critical enzymes for activating RNA polymerase II, phosphorylated serine 256 of OGFOD1, whereas a non-phosphorylated mutant OGFOD1 failed to enhance transcriptional activation and tumor growth. Consequently, OGFOD1 helps promote tumor growth by enhancing RNA polymerase II, whereas simultaneous phosphorylation of OGFOD1 by CDK enzymes is essential in stimulating RNA polymerase II-mediated transcription both in vitro and in vivo, and expression of target genes.

Miniaturized electromechanical devices for the characterization of the biomechanics of deep tissue

Evaluating the biomechanics of soft tissues at depths well below their surface, and at high precision and in real time, would open up diagnostic opportunities. Here, we report the development and application of miniaturized electromagnetic devices, each integrating a vibratory actuator and a soft strain-sensing sheet, for dynamically measuring the Young's modulus of skin and of other soft tissues at depths of approximately 1-8 mm, depending on the particular design of the sensor. We experimentally and computationally established the operational principles of the devices and evaluated their performance with a range of synthetic and biological materials and with human skin in healthy volunteers. Arrays of devices can be used to spatially map elastic moduli and to profile the modulus depth-wise. As an example of practical medical utility, we show that the devices can be used to accurately locate lesions associated with psoriasis. Compact electronic devices for the rapid and precise mechanical characterization of living tissues could be used to monitor and diagnose a range of health disorders.

Measurement of the Wγ Production Cross Section in Proton-Proton Collisions at sqrt[s]=13 TeV and Constraints on Effective Field Theory Coefficients

A fiducial cross section for Wγ production in proton-proton collisions is measured at a center-of-mass energy of 13 TeV in 137  fb^{-1} of data collected using the CMS detector at the LHC. The W→eν and μν decay modes are used in a maximum-likelihood fit to the lepton-photon invariant mass distribution to extract the combined cross section. The measured cross section is compared with theoretical expectations at next-to-leading order in quantum chromodynamics. In addition, 95% confidence level intervals are reported for anomalous triple-gauge couplings within the framework of effective field theory.

Observation of a New Excited Beauty Strange Baryon Decaying to Ξ_{b}^{-}π^{+}π^{-}

The Ξ_{b}^{-}π^{+}π^{-} invariant mass spectrum is investigated with an event sample of proton-proton collisions at sqrt[s]=13  TeV, collected by the CMS experiment at the LHC in 2016-2018 and corresponding to an integrated luminosity of 140  fb^{-1}. The ground state Ξ_{b}^{-} is reconstructed via its decays to J/ψΞ^{-} and J/ψΛK^{-}. A narrow resonance, labeled Ξ_{b}(6100)^{-}, is observed at a Ξ_{b}^{-}π^{+}π^{-} invariant mass of 6100.3±0.2(stat)±0.1(syst)±0.6(Ξ_{b}^{-})  MeV, where the last uncertainty reflects the precision of the Ξ_{b}^{-} baryon mass. The upper limit on the Ξ_{b}(6100)^{-} natural width is determined to be 1.9  MeV at 95% confidence level. The low Ξ_{b}(6100)^{-} signal yield observed in data does not allow a measurement of the quantum numbers of the new state. However, following analogies with the established excited Ξ_{c} baryon states, the new Ξ_{b}(6100)^{-} resonance and its decay sequence are consistent with the orbitally excited Ξ_{b}^{-} baryon, with spin and parity quantum numbers J^{P}=3/2^{-}.

Differential cardiopulmonary monitoring system for artifact-canceled physiological tracking of athletes, workers, and COVID-19 patients

Soft, skin-integrated electronic sensors can provide continuous measurements of diverse physiological parameters, with broad relevance to the future of human health care. Motion artifacts can, however, corrupt the recorded signals, particularly those associated with mechanical signatures of cardiopulmonary processes. Design strategies introduced here address this limitation through differential operation of a matched, time-synchronized pair of high-bandwidth accelerometers located on parts of the anatomy that exhibit strong spatial gradients in motion characteristics. When mounted at a location that spans the suprasternal notch and the sternal manubrium, these dual-sensing devices allow measurements of heart rate and sounds, respiratory activities, body temperature, body orientation, and activity level, along with swallowing, coughing, talking, and related processes, without sensitivity to ambient conditions during routine daily activities, vigorous exercises, intense manual labor, and even swimming. Deployments on patients with COVID-19 allow clinical-grade ambulatory monitoring of the key symptoms of the disease even during rehabilitation protocols.

Airflow limitation as a risk factor for vascular stiffness

BACKGROUND: Cardiovascular disease is one of the main causes of mortality in patients with chronic obstructive pulmonary disease (COPD), and atherosclerosis is a cause of cardiac comorbidities in COPD. However, it is not clear whether airflow limitation is associated with atherosclerosis irrespective of smoking.OBJECTIVE: To investigate whether airflow limitation is independently associated with vascular stiffness.METHODS: We enrolled 18 893 participants (male 70.5%; mean age 47.5 ± 9.8 years; never smokers 44.2%) who underwent spirometry and brachial-ankle pulse wave velocity (baPWV) as part of a standard health examination at Ajou University Hospital, Suwon, South Korea, from January 2010 to December 2015.We defined vascular peripheral atherosclerosis as baPWV ≥ 1400 cm/s and airflow limitation as pre-bronchodilator ratio of forced expiratory volume in 1 sec (FEV₁) to forced vital capacity (FVC) <70%.RESULTS: Mean baPWV was higher in subjects with airflow limitation (1477.6 ± 331.7 cm/sec, n = 638) than in those without airflow limitation (1344.1 ± 231.8 cm/sec, n = 18255, P < 0.001). In multivariate logistic regression analysis, the following were independent predictors associated with peripheral atherosclerosis (P < 0.05): age, male sex, fasting serum glucose, mean blood pressure, serum leukocyte count, serum low density lipoprotein level and FEV₁.CONCLUSION: Airflow limitation was an independent predictor of vascular stiffness irrespective of smoking history, which suggests that airflow limitation is linked with atherosclerosis.

Effect of feeding corn distillers dried grains with solubles naturally contaminated with deoxynivalenol on growth performance, meat quality, intestinal permeability, and utilization of energy and nutrients in broiler chickens

The objective of this experiment was to investigate the effect of feeding corn distillers dried grains with solubles (DDGS) naturally contaminated with deoxynivalenol (DON) on growth performance, meat quality, intestinal permeability, and utilization of energy and nutrients in broiler chickens. Two trials (growth and metabolism trials) were conducted. In the growth trial, a total of four hundred 7-day-old Ross 308 broiler chicks were allotted to 1 of 5 dietary treatments with 8 replicates in a completely randomized design. The diets were formulated to contain 5 inclusion levels of 0, 5, 10, 15, or 20% DON-contaminated DDGS in diets and were fed to birds for 21 d. Results indicated that increasing inclusion levels of DON-contaminated DDGS decreased (linear, P < 0.01) BW gain and feed efficiency of broiler chickens. The relative organ weights of the liver and breast were decreased (linear and quadratic, P < 0.05) by increasing inclusion levels of DON-contaminated DDGS in diets. The transepithelial electrical resistance values as a measure of intestinal permeability were decreased (linear, P < 0.05) by increasing inclusion levels of DON-contaminated DDGS in diets. In the metabolism trial, a total of twenty four 22-day-old Ross 308 broiler chickens were allotted to 1 of 3 dietary treatments consisting of 0, 10, or 20% inclusion of DON-contaminated DDGS in diets. Each treatment had 8 replicates. Increasing inclusion levels of DON-contaminated DDGS in diets decreased (linear and quadratic, P < 0.05) ME_n (AME_n and TME_n) and apparent total tract retention of nitrogen and acid-hydrolyzed ether extract in diets. In conclusion, feeding diets containing more than 10% DON-contaminated DDGS to broiler chickens has negative effects on growth performance, intestinal permeability, and utilization of energy and nutrients in diets. Therefore, it is suggested that if DDGS is contaminated with DON, inclusion level of DDGS should be limited, possibly at less than 5.0% in broiler diets.

Masking of High-Translucency Zirconia for Various Cores

CLINICAL RELEVANCE

Various core materials with different shades affect the final color of high-translucency monolithic zirconia restorations. The blue core shows the greatest color difference in final zirconia restorations followed by metal, A3 dentin-shade resin core, and white core.

SUMMARY

The purpose of this study was to evaluate the masking ability of high-translucency monolithic zirconia for various core materials. A computer-aided design-computer-aided manufacturing system was used to design a zirconia disc with a diameter of 10 mm and a thickness of 1.0 mm. Four groups of cores (n=15 each) were fabricated with blue-colored dual-cure resin, white-colored dual-cure resin, A3 dentin-shade composite resin, and titanium block with 10-mm diameter and 5-mm thickness.Dual-cure, self-adhesive resin cement discs with a thickness of 25.0 ± 0.02 μm were fabricated. The color was measured using a handheld spectrophotometer. Color measurements of all specimens were performed on a white background. To assess the masking ability of zirconia, the difference between the values measured with zirconia on a white background and the values measured with zirconia on each of the four types of core material as a background with the cement specimens interposed (zirconia + cement + core) was determined. To enhance the optical connection between the specimens, distilled water was applied between each layer during each measurement.The results showed that the value of ΔE was highest for the blue core followed by metal, A3 dentin-shade resin core, and white-resin core. No significant differences were observed between the metal core and the A3 dentin-shade resin core or between the A3 dentin-shade resin core and the white core. The blue core had the significantly highest ΔE value based on Tukey's honest significant difference test.Different core materials affect the final color of high-translucency monolithic zirconia restorations. Thus, our study showed that the final color of high-translucency monolithic zirconia restorations could be affected by the type of core material used.

Determining the Degree of Dopaminergic Denervation Based on the Loss of Nigral Hyperintensity on SMWI in Parkinsonism

BACKGROUND AND PURPOSE

Nigrostriatal dopaminergic function in patients with Parkinson disease can be assessed using ¹²³I-2β-carbomethoxy-3β-(4-iodophenyl)-N-(3-fluoropropyl)-nortropan dopamine transporter (¹²³I-FP-CIT) SPECT, and a good correlation has been demonstrated between nigral status on SWI and dopaminergic denervation on ¹²³I-FP-CIT SPECT. Here, we aim to correlate quantified dopamine transporter attenuation on ¹²³I-FP-CIT SPECT with nigrosome-1 status using susceptibility map-weighted imaging (SMWI).

MATERIALS AND METHODS

Between May 2017 and January 2018, consecutive patients with idiopathic Parkinson disease (n = 109) and control participants (n = 29) who underwent ¹²³I-FP-CIT SPECT with concurrent 3T SWI were included. SMWI was generated from SWI. Two neuroradiologists evaluated nigral hyperintensity from nigrosome-1 on each side of the substantia nigra. Using consensus reading, we compared the ¹²³I-FP-CIT-specific binding ratio according to nigral hyperintensity status and the ¹²³I-FP-CIT specific binding ratio threshold to confirm the loss of nigral hyperintensity was determined using receiver operating characteristic curve analysis.

RESULTS

The concordance rate between SMWI and ¹²³I-FP-CIT SPECT was 65.9%. The ¹²³I-FP-CIT-specific binding ratios in the striatum, caudate nucleus, and putamen were significantly lower when nigral hyperintensity in the ipsilateral substantia nigra was absent than when present (all, P < .001). The ¹²³I-FP-CIT-specific binding ratio threshold values for the determination of nigral hyperintensity loss were 2.56 in the striatum (area under the curve, 0.890), 3.07 in the caudate nucleus (0.830), and 2.36 in the putamen (0.887).

CONCLUSIONS

Nigral hyperintensity on SMWI showed high positive predictive value and low negative predictive value with dopaminergic degeneration on ¹²³I-FP-CIT SPECT. In patients with Parkinson disease, the loss of nigral hyperintensity is prominent in patients with lower striatal specific binding ratios.

APTES monolayer coverage on self-assembled magnetic nanospheres for controlled release of anticancer drug Nintedanib

The use of an appropriate delivery system capable of protecting, translocating, and selectively releasing therapeutic moieties to desired sites can promote the efficacy of an active compound. In this work, we have developed a nanoformulation which preserves its magnetization to load a model anticancerous drug and to explore the controlled release of the drug in a cancerous environment. For the preparation of the nanoformulation, self-assembled magnetic nanospheres (MNS) made of superparamagnetic iron oxide nanoparticles were grafted with a monolayer of (3-aminopropyl)triethoxysilane (APTES). A direct functionalization strategy was used to avoid the loss of the MNS magnetization. The successful preparation of the nanoformulation was validated by structural, microstructural, and magnetic investigations. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) were used to establish the presence of APTES on the MNS surface. The amine content quantified by a ninhydrin assay revealed the monolayer coverage of APTES over MNS. The monolayer coverage of APTES reduced only negligibly the saturation magnetization from 77 emu/g (for MNS) to 74 emu/g (for MNS-APTES). Detailed investigations of the thermoremanent magnetization were carried out to assess the superparamagnetism in the MNS. To make the nanoformulation pH-responsive, the anticancerous drug Nintedanib (NTD) was conjugated with MNS-APTES through the acid liable imine bond. At pH 5.5, which mimics a cancerous environment, a controlled release of 85% in 48 h was observed. On the other hand, prolonged release of NTD was found at physiological conditions (i.e., pH 7.4). In vitro cytotoxicity study showed dose-dependent activity of MNS-APTES-NTD for human lung cancer cells L-132. About 75% reduction in cellular viability for a 100 μg/mL concentration of nanoformulation was observed. The nanoformulation designed using MNS and monolayer coverage of APTES has potential in cancer therapy as well as in other nanobiological applications.

Influence of Gingival Contour on Marginal Fit of CAD-CAM Zirconia Copings on Implant Stock Abutments

PURPOSE

Intraoral scanning subgingival finish lines has been described as challenging. The purpose of this study was to assess the impact of gingival contour around margins of implant stock abutments on marginal fit of Computer-aided Design - Computer-aided Manufacturing (CAD-CAM) zirconia copings. This in-vitro study was conducted on 40 analogues of implant stock abutments that were embedded into individual phantoms composed by a resin block. All 40 phantoms underwent two intraoral scans - one with (test group) and one without artificial gingiva (control group) - using a closed system intraoral scanner. Zirconia copings were then digitally designed and milled, followed by high-speed sintering, before being analyzed for marginal adaptation and internal surface roughness with scanning electron microscopy. Statistically significant differences between groups were assessed with the Mann-Whitney test. Median marginal gap values were 149.78 μm (95% CI: 112.39-216.66) for the test group and 94.90 μm (95% CI: 83.89-107.74) for the control group. A statistically significant difference was found between groups (p=0.0001). However, there were no subjective differences between groups for internal surface roughness. Within the limitations of this study, the present findings suggest that a gingival contour one millimeter higher than the finishing line affects marginal adaptation of CAD-CAM zirconia copings.

Liposomal irinotecan plus fluorouracil/leucovorin versus FOLFIRINOX as the second-line chemotherapy for patients with metastatic pancreatic cancer: a multicenter retrospective study of the Korean Cancer Study Group (KCSG)

Background

There is no clear consensus on the recommended second-line treatment for patients with metastatic pancreatic cancer who have disease progression following gemcitabine-based therapy. We retrospectively evaluated the clinical outcomes of liposomal irinotecan (nal-IRI) plus fluorouracil/leucovorin (FL) and FOLFIRINOX (fluorouracil, leucovorin, irinotecan, and oxaliplatin) in patients who had failed on the first-line gemcitabine-based therapy.

Patients and methods

From January 2015 to August 2019, 378 patients with MPC who had received nal-IRI/FL (n = 104) or FOLFIRINOX (n = 274) as second-line treatment across 11 institutions were included in this retrospective study.

Results

There were no significant differences in baseline characteristics between groups, except age and first-line regimens. With a median follow-up of 6 months, the median progression-free survival (PFS) was 3.7 months with nal-IRI/FL versus 4.6 months with FOLFIRINOX (P = 0.44). Median overall survival (OS) was 7.7 months with nal-IRI/FL versus 9.7 months with FOLFRINOX (P = 0.13). There was no significant difference in PFS and OS between the two regimens in the univariate and multivariate analyses. The subgroup analysis revealed that younger age (<70 years) was associated with better OS with FOLFIRINOX. In contrast, older age (≥70 years) was associated with better survival outcomes with nal-IRI/FL. Adverse events were manageable with both regimens; however, the incidence of grade 3 or higher neutropenia and peripheral neuropathy was higher in patients treated with FOLFIRINOX than with nal-IRI/FL.

Conclusions

Second-line nal-IRI/FL and FOLFIRINOX showed similar effectiveness outcomes after progression following first-line gemcitabine-based therapy. Age could be the determining factor for choosing the appropriate second-line therapy.

•

This multicenter retrospective study investigated nal-IRI/FL and FOLFIRINOX outcomes after gemcitabine-based therapy.

•

We found no significant differences in outcome between nal-IRI/FL and FOLFIRINOX treatment.

•

Both regimens were well tolerated; however, neutropenia and peripheral neuropathy were more frequent with FOLFIRINOX.

•

Age (cut-off, 70 years) showed differential efficacy between chemotherapy regimens.

Paratenon of the cruciate ligaments of the knee: a macroscopic and histological study of human fetuses

BACKGROUND

The paratenon is a sheath-like connective tissue that allows the tendon to move with minimal friction. The careful removal of the paratenon along the cruciate ligaments is a critical step of knee surgery. Thus, orthopedic surgeons and interventional radiologists consider the paratenon as a basic anatomical tissue along a ligament, not along a tendon.

MATERIALS AND METHODS

We performed macroscopic and histological observations of cruciate ligament-associated paratenons in 43 human fetuses.

RESULTS

This tissue usually had a thick armor-like appearance that was distant from the infrapatellar fat pad. The anterior cruciate ligament, rather than the posterior ligament, was deeply embedded in the paratenon. The paratenon contained abundant arteries and veins and, at and near the crossing between the cruciate ligaments, had a well-developed venous plexus. Notably, there were abundant fused veins in the paratenon venous plexus, and prenatal knee movements (especially rotation) seemed to restrict its blood supply, leading to the development of a large cavity by way of advancing fusion of veins in the degenerating plexus. This unique manner of cavitation likely expanded the joint cavity.

CONCLUSIONS

Differences in knee movements in utero seemed to cause differences in the thickness of the paratenon among fetuses. New-borns might have limited knee flexion due to a mass-effect of the thick paratenon around the cruciate ligaments. A slight twisting or rotation at the knee may help to release the knee, because it can break the fetal paratenon and accelerate cavitation.

Effects of Microbes from Coal-Related Commercial Humic Substances on Hydroponic Crop Cultivation: A Microbiological View for Agronomical Use of Humic Substances

Here, coal-related humic substances (HSs) were examined to confirm whether sterilization treatments induce their inferior ability to stimulate lettuce in hydroponic cultivations. Interestingly, a drastic reduction in both lettuce biomass and microbial colony-forming units of the crop culture solutions was observed when the autoclaved HSs were treated. Some microbial genera (i.e., Bacillus and Aspergillus) identifiable in the bare HS-treated hydroponic systems were able to be isolated by direct inoculation of bare HS powders on conventional microbial nutrients, supporting that flourishing microbes in the hydroponic cultivations derive from bare HSs-treated. Moreover, coincubation of some isolated bacterial and fungal strains (i.e., Bacillus and Aspergillus genera) from HSs with lettuce resulted in a significant increase in plant biomass and enhanced resistance to NaCl-related abiotic stresses. Microbial volatile organic compounds renowned for plant stimulation were detected by using solid-phase microextraction coupled with gas chromatography-mass spectrometry. It was finally confirmed that the isolates are capable of utilizing carbon substrates such as pectin and tween 20 or 40, which are relevant to those of microbes isolated from peat and leonardite (i.e., HS extraction sources). Overall, our results suggest that microbiological factors could be considered when commercial coal-related HSs are applied in hydroponic crop cultivations.

Three-Dimensional Printing of Natural Materials Involving Loess-Based Composite Materials Designed for Ecofriendly Applications

In this work, loess-based materials were designed based on a multicomponent composite materials system for ecofriendly natural three-dimensional (3D) printing involving quick lime, gypsum, and water. The 3D printing process was monitored as a function of gypsum content; in terms of mechanical strength and electrical resistance, in the cube-shaped bulk form. After initial optimization, the 3D printing composition was refined to provide improved printability in a 3D printing system. The optimal 3D fabrication allowed for reproducible printing of rectangular columns and cubes. The development of 3D printing materials was scrutinized using a multitude of physicochemical probing tools, including X-ray diffraction for phase identification, impedance spectroscopy to monitor setting behaviors, and mercury intrusion porosimetry to extract the pore structure of loess-based composite materials. Additionally, the setting behavior in the loess-based composite materials was analyzed by investigating the formation of gypsum hydrates induced by chemical reaction between quick lime and water. This setting reaction provides reasonable mechanical strength that is sufficient to print loess-based pastes via 3D printing. Such mechanical strength allows utilization of robotic 3D printing applications that can be used to fabricate ecofriendly structures.

Role of the RNF213 Variant in Vascular Outcomes in Patients With Intracranial Atherosclerosis

Background

The RNF213 (ring finger protein 213 gene) variant R4810K is a susceptibility allele not only for Moyamoya disease (MMD) but also for intracranial atherosclerosis (ICAS) in East Asian populations. We hypothesized that this variant would affect the distribution of ICAS and recurrence of cerebrovascular events.

Methods and Results

We conducted a prospective study of patients with ICAS and MMD using high‐resolution magnetic resonance imaging and RNF213 R4810K genotyping. Patients were included in the ICAS group when relevant plaques existed on high‐resolution magnetic resonance imagingand in the MMD group when they carried the variant and high‐resolution magnetic resonance imaging showed no plaques but characteristic features of MMD. We compared clinical and neuroimaging features of patients with ICAS‐RNF213+ with patients with ICAS‐RNF213− and of patients with MMD. Of 477 patients, 238 patients were in the ICAS group and 239 were in the MMD group. Among patients with ICAS, 79 patients (33.2%) were in the ICAS‐RNF213+ group and 159 (66.8%) in the ICAS‐RNF213− group. Tandem lesions were significantly more common in the ICAS‐RNF213+ group than in the ICAS‐RNF213− group (40.3% versus 72.2%, P<0.001), and their distributions were similar between the ICAS‐RNF213+ and MMD groups. The presence of the R4810K variant (hazard ratio [HR], 3.203; 95% CI, 1.149–9.459; P=0.026) and tandem lesions (≥3) (HR, 8.315; 95% CI, 1.930–39.607; P=0.005) were independently associated with recurrent cerebrovascular events.

Conclusions

Patients with ICAS carrying the RNF213 R4810K variant showed clinical and imaging features distinct from patients with ICAS without the variant, suggesting that the R4810K variant plays a role in intracranial atherosclerosis in East Asian patients.

Evidence for Top Quark Production in Nucleus-Nucleus Collisions

Ultrarelativistic heavy ion collisions recreate in the laboratory the thermodynamical conditions prevailing in the early universe up to 10^{-6}  sec, thereby allowing the study of the quark-gluon plasma (QGP), a state of quantum chromodynamics (QCD) matter with deconfined partons. The top quark, the heaviest elementary particle known, is accessible in nucleus-nucleus collisions at the CERN LHC, and constitutes a novel probe of the QGP. Here, we report the first evidence for the production of top quarks in nucleus-nucleus collisions, using lead-lead collision data at a nucleon-nucleon center-of-mass energy of 5.02 TeV recorded by the CMS experiment. Two methods are used to measure the cross section for top quark pair production (σ_{tt[over ¯]}) via the selection of charged leptons (electrons or muons) and bottom quarks. One method relies on the leptonic information alone, and the second one exploits, in addition, the presence of bottom quarks. The measured cross sections, σ_{tt[over ¯]}=2.54_{-0.74}^{+0.84} and 2.03_{-0.64}^{+0.71}  μb, respectively, are compatible with expectations from scaled proton-proton data and QCD predictions.