Optimum condition of anisotropic plasma etching for improving bending properties of ionic polymer-metal composites

We presented an anisotropic plasma etching technique by reactive ion etcher (RIE) as a new pretreatment method of fabrication of ionic polymer-metal composite (IPMC). We already found that the new technique provided large displacement to the fabricated IPMC in the presence of low applied voltage. However, we did not examine the optimum condition for the anisotropic plasma etching. In this research, we tried to figure out optimum treatment condition of film in etcher. Nafion (by DuPont) films were etched using various etching time and shadow masks with various slit and space sizes. The etched samples were plated with Pt at top and bottom side by Oguro's reduction method. The surface morphology of fabricated IPMCs was characterized by SEM. And, we've measured surface resistance, bending displacement, and driving force in order to check the IPMC properties out. Here, we found that optimum condition for pre-treatment of Nafion was 1 min for etching time under shadow mask with 200 microm slit and 100 microm space.

High sensitive NO2 gas sensor with low power consumption using selectively grown ZnO nanorods

The noble gas sensor using multiple ZnO nanorods was fabricated with CMOS compatible process and sol-gel growth method on selective area and gas response characteristics to NO2 gas of the sensor device were investigated. We confirmed the sensors had high sensitive response denoted by the sensitivity of several tens for NO2 gas sensing and also showed pretty low power consumption close to 20 mW even though the recovery of resistance come up to almost the initial value.

Low power consumption and high sensitivity carbon monoxide gas sensor using indium oxide nanowire

In this paper, micro gas sensor was fabricated using indium oxide nanowire for effective gas detection and monitoring system. Indium oxide nanowire was grown using thermal CVD, and their structural properties were examined by the SEM, XRD and TEM. The electric properties for microdropped indium oxide nanowire device were measured, and gas response characteristics were examined for CO gas. Sensors showed high sensitivity and stability for CO gas. And with below 20 mw power consumption, 5 ppm CO could be detected.

Electron beam induced current measurements on single-walled carbon nanotube devices

We report on electron beam induced current (EBIC) from individual carbon nanotubes (CNTs) which are in contact with metal electrodes. The EBIC signals originate from the diffusion of excess carriers induced by the electron beam bombardment. The EBIC image enables us to locate the individual CNTs efficiently. From the polarity of the EBIC signals we can identify the electrical contacts to the metal electrodes. More importantly, we demonstrate that the EBIC can be used to characterize the local electrical properties of CNT-based devices, such as asymmetry in metal contacts and the presence of defects. EBIC is also observed regardless of the presence of insulating surfaces, indicating that the EBIC is a result of the direct interaction between the CNTs and the electron beams.

Inhibitory effects on mushroom tyrosinase by flavones from the stem barks of Morus lhou (S.) Koidz

Five flavones displaying tyrosinase inhibitory activity were isolated from the stem barks of Morus lhou (S.) Koidz., a cultivated edible plant. The isolated compounds were identified as mormin (1), cyclomorusin (2), morusin (3), kuwanon C (4), and norartocarpetin (5). Mormin (1) was characterized as a new flavone possesing a 3-hydroxymethyl-2-butenyl at C-3. The inhibitory potencies of these flavonoids toward monophenolase activity of mushroom tyrosinase were investigated. The IC50 values of compounds 1-5 for monophenolase activity were determined to be 0.088, 0.092, 0.250, 0.135 mM, and 1.2 microM, respectively. Mormin (1), cyclomorusin (2), kuwanon C (4) and norartocarpetin (5) exhibited competitive inhibition characteristics. Interestingly norartocarpetin (5) showed a time-dependent inhibition against oxidation of L-tyrosine: it also operated under the enzyme isomerization model (k5 = 0.8424 min(-1), k6 = 0.0576 min(-1), K(app)(i) = 1.354 microM).

Electroactive polymer actuator with high response speed through anisotropic surface roughening by plasma etching

Plasma etching was performed to improve displacement and response speed of IPMC actuator through homogeneous roughening and anisotropic surface treatment. We found that the anisotropic surface treatment by plasma etching of Nafion in the pre-treatment process gave the response speed and displacement of resulting IPMC which was 2 times faster and 1.5 times larger than those manufactured by the sandblasting, respectively.

Electrical characterization of ZnO single nanowire device for chemical sensor application

Vertically well-aligned high quality ZnO nanowires were grown on GaN epilayer on c-plane sapphire via a vapor-liquid-solid (VLS) process by introducing an Au thin film (3 nm) as a catalyst. ZnO single nanowire device was ingenuously fabricated by combining conventional optical lithography and high resolution electron beam lithography and its current-voltage characteristics were measured with doing the post process to acquire reproducible performance as a chemical gas sensor. And its temperature dependent current-voltage characteristics were measured to investigate temperature dependant electrical transport. The ZnO nanowire device showed slightly non-ohmic current-voltage characteristics which may be due to back-to-back configuration of the diodes with the insulating contact barriers and showed an relatively small activation energy of 0.2 eV. To test our device as a chemical sensor, the NO2 gas response was reported at the elevated temperature.

Kurarinol, tyrosinase inhibitor isolated from the root of Sophora flavescens

It is well known that flavanones, sophoraflavanone G 1, kurarinone 2, and kurarinol 3, from the root of Sophora flavescens, have extremely strong tyrosinase inhibitory activity. This study delineates the principal pharmacological features of kurarinol 3 that lead to inhibition of the oxidation of l-tyrosine to melanin by mushroom tyrosinase (IC(50) of 100 nM). The inhibition kinetics analyses unveil that compounds 1 and 2 are noncompetitive inhibitors. However similar analysis shows kurarinol 3 to be a competitive inhibitor. Compounds 1 and 2 exhibited potent antibacterial activity with 10 microg/disk against Gram-positive bacteria, whereas kurarinol 3 did not ostend any antibacterial activity. Interestingly, kurarinol 3 inhibits production of melanin in S. bikiniensis without affecting the growth of microorganism. It is thus distinctly different from the other tyrosinase inhibitors 1 and 2. In addition, kurarinol 3 manifests relatively low cytotoxic activity (EC(50)>30 microM) compared to 1 and 2. To account for these observations, we conducted molecular modeling studies. These suggested that the lavandulyl group within 3 is instrumental in the interaction with the enzyme. More specifically, the terminal hydroxy function within the lavandulyl group is most important for optimal binding.

Retrobulbar optic neuritis and meningoencephalitis following progressive outer retinal necrosis due to CMV in a patient with AIDS

We report on a 34-year-old male patient with AIDS who developed retrobulbar optic neuritis and meningoencephalitis following bilateral progressive outer retinal necrosis (PORN) caused by cytomegalovirus (CMV). This case documents the presumed association of PORN with retrobulbar optic neuritis, and CMV meningoencephalitis in an AIDS patient.

Osseointegration of anodized titanium implants under different current voltages: a rabbit study

The oxide layer that covers a titanium surface is extremely stable and appears to have excellent biocompatibility, which can result in successful osseointegration. The aim of this study was to analyse the characteristics of an oxide layer formed by anodic oxidation (anodization), and to evaluate the extent of bone healing around the anodized implant. The screw-type implants were made of commercially pure titanium (Grade 2). The Group 1 samples had a turned surface, and three other types of experimental specimens were anodized under constant voltages of 190 V (Group 2), 230 V (Group 3) and 270 V (Group 4). The surface characteristics of each sample type were inspected. Removal torque was measured after a 4-week healing period and the histomorphometric analysis was performed 6 weeks after implantation in rabbit tibiae. There was an increase in both the size and number of pores as the anodizing voltage increased. The Ra value of the Group 4 samples was higher than those in the Group 1 and 2 samples (P < 0.05). Group 3 showed a difference compared with Group 1 (P < 0.05). A thicker oxide layer, which contained crystalline (anatase) TiO(2) with the inclusion of some electrolytes (Ca, P), was formed at the higher anodizing voltage. Group 4 had higher removal torque values and percentages of bone-to-implant contact than the other groups (P < 0.05). The anodized titanium implants showed more intimate and stronger connections with peri-implant bone during early osseointegration than the turned titanium implants in this experimental model.

Attentional distractibility by optokinetic stimulation in Alzheimer disease

OBJECTIVE

Unilateral temporoparietal injury may result in an attentional deficit for stimuli presented in contralesional space. Thus, bilateral temporoparietal degeneration associated with Alzheimer disease (AD) might result in a bilateral attentional disturbance. Tests for hemispatial neglect, however, primarily assess spatial attentional asymmetries, and a bilateral attentional disorder might not be detected with these tests. The goal of this study was to learn whether optokinetic stimulation (OKS) would perturb the balanced attentional deficits of AD patients and alter their spatial allocation of attention.

METHODS

In Experiment I, 10 AD patients with bilateral temporoparietal glucose hypometabolism on PET and 10 controls bisected lines in two conditions: stationary solid lines superimposed on a moving background and "striped lines" where the whole line was stationary but the stripes within the line moved. The background OKS or the stripes within the line moved leftward or rightward or were stationary. In Experiment II, to investigate whether the influence of background movements would increase with AD severity, we conducted a similar experiment in 56 patients with various stages of AD.

RESULTS

In Experiment I, the line bisection errors (LBEs) of AD subjects, but not of the controls, were markedly influenced by both background and within line stripe motions, deviations occurring in the same direction of movement. In Experiment II, LBEs also occurred in the same direction as background movement and increased with dementia severity.

CONCLUSIONS

These results demonstrate that patients with Alzheimer disease are spatially distracted by moving stimuli.

Three dimensional reconstruction of conventional stereo optic disc image

Stereo disc photograph was analyzed and reconstructed as 3 dimensional contour image to evaluate the status of the optic nerve head for the early detection of glaucoma and the evaluation of the efficacy of treatment. Stepwise preprocessing was introduced to detect the edge of the optic nerve head and retinal vessels and reduce noises. Paired images were registered by power cepstrum method and zero-mean normalized cross-correlation. After Gaussian blurring, median filter application and disparity pair searching, depth information in the 3 dimensionally reconstructed image was calculated by the simple triangulation formula. Calculated depth maps were smoothed through cubic B-spline interpolation and retinal vessels were visualized more clearly by adding reference image. Resulted 3 dimensional contour image showed optic cups, retinal vessels and the notching of the neural rim of the optic disc clearly and intuitively, helping physicians in understanding and interpreting the stereo disc photograph.

Treatment of non-biodegradable cutting oil wastewater by ultrasonication-Fenton oxidation process

To treat cutting oil wastewater produced in metal surface treatment industry, Ultrasonication (US)-Fenton process, which is one of the advanced oxidation processes, was used. The optimum conditions to treat non-biodegradable pollutants using the US-Fenton process were that the application rates of H2O2 and FeSO4 were 10% and 3 g/L, respectively, the value of pH was 3, and the ultrasonication time was 30 min. It identified non-degradable pollutants such as ethylene diamine tetraacetic acid (EDTA) and Triethanolamine (TEA) in the cutting oil wastewater. TLC analysis of two compounds of treated water by the coagulation process was similar to that of raw water. However, TLC analysis of two compounds of US-Fenton process was different from that of raw water, meaning that US-Fenton process decomposed the EDTA and TEA. To study the possibility of application with the US-Fenton process to pilot plant, the pollutants treatment efficiency of three different methods, such as US-Fenton process, activated sludge process and coagulation process, in continuous experiments were compared. The removal rate of pollutants by the US-Fenton process according to the effluent time was higher than any other processes. The removal rates of COD, SS, T-N and T-P by US-Fenton process were 98, 93, 75 and 95%, respectively.

Development and evaluation of triplex PCR for direct detection of mycobacteria in respiratory specimens

AIMS

To develop a method for the simultaneous detection of Mycobacterium tuberculosis, Mycobacterium avium-intracellularecomplex (MAC), and other mycobacteria in clinical specimens using triplex PCR.

METHODS AND RESULTS

The target of amplification was the internal transcribed spacer region between the l6S and 23S rDNA genes. Twenty-two mycobacterial type strains, 118 M. tuberculosis, 87 other mycobacteria, 75 nonmycobacterial pathogens, 115 respiratory specimens from confirmed cases of tuberculous or other mycobacterial diseases, and sputa from 50 patients with nonmycobacterial respiratory diseases were tested. In M. tuberculosis, 322 bp pan-mycobacterial and 133 bp species-specific bands were observed. In MAC, the respective bands were 322 and 84 bp. The other mycobacteria showed single pan-mycobacterial bands of approx. 300-350 bp. Nonspecific amplicons were not found in any of the nonmycobacterial pathogens. In the tuberculosis specimens, 96.4% of smear-positive specimens and 70.2% of smear-negative specimens showed positive reactions. Specimens from two patients with MAC infection were MAC positive. Only 1 of 50 specimens from nonmycobacterial diseases was positive (2.0%).

CONCLUSION, SIGNIFICANCE AND IMPACT OF THE STUDY

Triplex PCR enables accurate and rapid diagnosis of tuberculosis and probably is useful for the detection of MAC and other mycobacteria in respiratory specimens.

Increased telomerase activity and human telomerase reverse transcriptase mRNA expression in the endometrium of patients with endometriosis

BACKGROUND

Endometriosis is considered a frequent, benign disease with the ability to undergo neoplastic processes. The aim of this study was to evaluate the limitless replication potential of the endometrium in patients with endometriosis by examining human telomerase reverse transcriptase (hTERT) mRNA expression and telomerase activity.

METHODS

Endometrium samples from 30 endometriosis patients and 30 patients without endometriosis were obtained via endometrial biopsy. The expression of hTERT mRNA was determined by real-time RT-PCR assay, and telomerase activity was measured by telomerase repeat amplification protocol (TRAP) assay.

RESULTS

The mean normalized hTERT (N hTERT) mRNA level was significantly higher in the endometriosis than in the control group (P = 0.013). The mean hTERT mRNA levels during the proliferative phase and during the secretory phase were higher in the endometriosis group than in the control group, although the difference was only significant for the secretory phase (P = 0.036). We found a prominent difference in endometrial telomerase activity between moderate-to-severe endometriosis and the control group (P = 0.048). The levels of hTERT mRNA and telomerase activity increased as the disease became more severe (P = 0.038, P = 0.016).

CONCLUSIONS

This study showed the overexpression of hTERT mRNA and telomerase activity in the endometrium of endometriosis patients. These finding suggest that replication potential of endometrial cells may have an important role in the pathogenesis of endometriosis.

Use of hydrocyclone and flotation column for reducing the volume of contaminated dredged material

As sediment contamination problems have recently been raised in Korea, the need for technologies to clean contaminants in sediments has increased. Although the recalcitrant organic matters and heavy metals in the contaminated sediments are of primary concern, large amounts of sediment makes the removal of the contaminants in them more difficult. In this study, the performance of hydrocyclone and flotation column was tested to reduce the volume of contaminated dredged materials (CDMs) prior to treating recalcitrant matters, such as various organic chemicals and heavy metals, in an integrated treatment system. When hydrocyclone was operated with 10% (w/v) solids concentration of the feed slurry, the total solids of upflow products were 4 to 7% (w/v) when the inlet pressure was changed from 1.0 to 2.0 kg/cm2. The volume reduction ratio of CDMs by hydrocyclone was approximately 90% (v/v). When the upflow products in hydrocyclone was then spiked with automobile transmission oil and fed to the flotation colum to see the performance of the column flotation on the volume reduction and the TPH removal, 44% of the TPHs in feed were removed at the tails and the volume reduction ratio of CDMs by column flotation was 18% at 200 L/min of wash water. The flotation column could be proposed as a potential preliminary treatment process of CDMs prior to subsequent biological treatments.

Docetaxel (Taxotere), cisplatin, UFT, and leucovorin combination chemotherapy in advanced gastric cancer

We conducted this study to ascertain the efficacy and toxicity of docetaxel and cisplatin combined with oral UFT and leucovorin as a first-line treatment for patients with advanced gastric cancer. In all, 52 patients received courses of docetaxel 60 mg m(-2) intravenously (i.v.) for 1 h and then cisplatin 75 mg m(-2) i.v. for 2 h on day 1. Oral UFT at 400-600 mg day(-1), as determined by body surface area, and leucovorin at 75 mg day(-1) were administered for 21 consecutive days from day 1, and this was followed by a 7-day drug-free interval. A total of 225 courses were administered, and the median number of courses per patient was four. Four complete responses (7.7%) and 22 partial responses (42.3%) were achieved, giving an overall response rate of 50% (95% Confidence Interval: 36.4-63.6%). The major toxicity was neutropenia, which reached grade 3/4 in 36 patients (69.3%). Grade 3/4 nausea and vomiting was observed in 12 patients (23.1%). Median time to progression was 22 weeks (4 to 156+ weeks), median survival duration was 48 weeks (4 to 156+ weeks), and median response duration was 24 weeks (6-152 weeks). We conclude that docetaxel, cisplatin, oral UFT, and leucovorin combination chemotherapy is effective and tolerable for the treatment of advanced gastric cancer.

Efficacy of amblyopia therapy initiated after 9 years of age

AIMS/PURPOSE

To evaluate the efficacy of occlusion therapy initiated after 9 years of age.

METHODS

A total of 16 amblyopes of 9 years or older (range, 9.0-14.5 years; mean, 10.5 years) with a difference in visual acuity of over two lines between the eyes alter 4 weeks of first full-time spectacle wear were included. None of the children had undergone a previous ocular examination, had ever worn spectacles, received occlusion therapy, or had strabismus surgery. Initial worst visual acuity after 4 weeks of full-time spectacle wear was 20/100 in three patients, between 20/80 and 20/40 in 11 patients, and 20/30 in two patients. Full-time occlusion was performed in 14 patients and part-time occlusion in two patients.

RESULTS

The final visual acuity of 15 out of 16 patients (94%) improved at least two lines. The final visual acuities ranged from 20/30 to 20/20 in 14 patients, 20/40 in one patient, and 20/50 in one remaining patient who began amblyopia therapy at 14.5 years of age, with the poorest compliance among the patients.

CONCLUSIONS

Occlusion therapy for anisometropic and strabismic amblyopia can be successful even if initiated after the age of 9 years.

Granulocytic sarcoma of the uterine cervix

Granulocytic sarcoma (GS) is a rare manifestation of leukemia and has been reported in 3-5% of acute myelogenous leukemia (AML) patients. GS in the uterine cervix is very rare and is also called chloroma because of its greenish appearance. We present the case of a patient whose disease relapsed as chloroma of the uterine cervix after bone marrow transplantation (BMT). She remained in continuous complete remission for 2 years after allogeneic BMT. However, she visited the hospital because of painless vaginal bleeding. She was diagnosed as having chloroma by cervical smear and colposcopically directed biopsy of the cervix. Systemic chemotherapy was administered on the presumption that myelogenous leukemia had recurred as chloroma, and a good clinical response was achieved. We describe the first case of AML that relapsed as chloroma of the uterine cervix after complete remission of the AML, which had complete response to only systemic chemotherapy.

Misidentification of Aeromonas veronii biovar sobria as Vibrio alginolyticus by the Vitek system

AIMS

To find the cause of misidentification of aeromonads when using the Vitek system.

METHODS AND RESULTS

Two Aeromonas veronii biovar sobria isolates were misidentified as Vibrio alginolyticus by the Vitek system. Both strains' identification was confirmed by biochemical testing, API 20E/20NE kits and/or 16S RFLP analysis. Thirty-one known Aeromonas species were tested by the Vitek system using 0.45 and 0.85% saline in the suspension medium. It was not clear whether low salinity causes misidentification of Aeromonas species more frequently.

CONCLUSIONS

The specified reaction time may be inappropriately short for some critical biochemical tests of some strains. An ingenious reading strategy regarding incubation time is necessary to improve identification of Aeromonas species by the Vitek system.

SIGNIFICANCE AND IMPACT OF THE STUDY

To our knowledge, this is the first report of misidentification of A. veronii biovar sobria as V. alginolyticus in the Vitek system.