Application of DET (diffusive equilibrium in thin films) and DGT (diffusive gradients in thin films) techniques in the study of the mobility of sediment-bound metals in the outer section of Songkhla Lake, Southern Thailand

The techniques of diffusive equilibrium in thin films (DET) and diffusive gradients in thin films (DGT) were used in the outer section of Songkhla Lake, Thailand in order to obtain high-resolution profiles of total dissolved and labile trace metals in the sediment pore water and investigate benthic fluxes. Six DET probes and six DGT probes were deployed at the mouths of the Phawong, Samrong and U-Taphao canals. A close correspondence could be observed between the high-resolution profiles of Fe and As, revealing a close link between the reductive remobilization of Fe oxides and the reduction of As(V). Co and Ni DGT profiles showed a close correspondence with Mn, but a narrow mobilization zone. Reductive mobilization of Mn oxides and associated metals and sulfide precipitation control the behaviour of these metals. The DGT profiles of Cu, Zn, Cd and Pb show surface maximum, probably linked to organic matter degradation. Important benthic fluxes, especially for As, were found at the mouths of the U-Taphao and Phawong canals.

Reproducibility of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) measurements in mussel shells and comparison with micro-drill sampling and solution ICP-MS

The accumulation of trace elements (Mg, Mn, Sr, Ba) in Unio pictorum L. mussel shells from Lake Balaton has been assessed using a Laser Ablation (LA) system coupled to either a quadrupole-based or a sector-field inductively coupled plasma-mass spectrometer (ICP - MS), as well as by a combination of micro-drill sampling and solution ICP-MS. The LA-ICP-MS measurements were carried out in the holes made by the micro-drilling system. The longitudinal concentration profiles obtained with the different methods show similar patterns. However, the absolute concentrations determined at individual spots (holes) can be quite different. Especially Ba shows erratic peaks at a very small spatial scale. A paired, two-sample t-test between LA-ICP-MS longitudinal profiles and between LA-ICP-MS and micro-drill/solution ICP-MS profiles indicates that, in most cases, there is no significant difference between the concentration profiles of Ba, Mg, Mn and Sr. Average shell concentrations of Mg, Mn, Sr and Ba, as obtained by LA-ICP-MS and micro-drill/solution ICP-MS, compare well with bulk shell concentrations as obtained by acid digestion/ICP-MS of larger shell pieces. Next to the four elements mentioned above, also the concentrations of Cd, Co, Cr, Cu, Ni, Pb and Zn could be determined by bulk shell analysis. The element concentrations in 11 shells, all sampled at the same site, show a relative standard deviation (RSD) between 2% (Ni) and 46% (Zn). LA-ICP-MS and micro-drill solution ICP-MS are not sensitive enough for the determination of ultra-trace elements in Lake Balaton's mussel shells. We estimated the amount of shell material necessary to determine Ni, Pb, Cr and Cu by micro-drilling ICP-MS (for a concentration that equals 3 times their limit of detection) at, respectively, 0.04, 0.82, 2.7 and 0.4 mg, while the amount sampled by micro-drilling is about 0.06 mg.

Neurobehavioral function and low-level exposure to brominated flame retardants in adolescents: a cross-sectional study

BACKGROUND

Animal and in vitro studies demonstrated a neurotoxic potential of brominated flame retardants, a group of chemicals used in many household and commercial products to prevent fire. Although the first reports of detrimental neurobehavioral effects in rodents appeared more than ten years ago, human data are sparse.

METHODS

As a part of a biomonitoring program for environmental health surveillance in Flanders, Belgium, we assessed the neurobehavioral function with the Neurobehavioral Evaluation System (NES-3), and collected blood samples in a group of high school students. Cross-sectional data on 515 adolescents (13.6-17 years of age) was available for the analysis. Multiple regression models accounting for potential confounders were used to investigate the associations between biomarkers of internal exposure to brominated flame retardants [serum levels of polybrominated diphenyl ether (PBDE) congeners 47, 99, 100, 153, 209, hexabromocyclododecane (HBCD), and tetrabromobisphenol A (TBBPA)] and cognitive performance. In addition, we investigated the association between brominated flame retardants and serum levels of FT3, FT4, and TSH.

RESULTS

A two-fold increase of the sum of serum PBDE's was associated with a decrease of the number of taps with the preferred-hand in the Finger Tapping test by 5.31 (95% CI: 0.56 to 10.05, p = 0.029). The effects of the individual PBDE congeners on the motor speed were consistent. Serum levels above the level of quantification were associated with an average decrease of FT3 level by 0.18 pg/mL (95% CI: 0.03 to 0.34, p = 0.020) for PBDE-99 and by 0.15 pg/mL (95% CI: 0.004 to 0.29, p = 0.045) for PBDE-100, compared with concentrations below the level of quantification. PBDE-47 level above the level of quantification was associated with an average increase of TSH levels by 10.1% (95% CI: 0.8% to 20.2%, p = 0.033), compared with concentrations below the level of quantification. We did not observe effects of PBDE's on neurobehavioral domains other than the motor function. HBCD and TBBPA did not show consistent associations with performance in the neurobehavioral tests.

CONCLUSIONS

This study is one of few studies and so far the largest one investigating the neurobehavioral effects of brominated flame retardants in humans. Consistently with experimental animal data, PBDE exposure was associated with changes in the motor function and the serum levels of the thyroid hormones.

Persistent organic pollutants (POPs) in human milk: a biomonitoring study in rural areas of Flanders (Belgium)

To collect information on the concentrations of persistent organic pollutants (POPs) in the rural areas in Flanders (Belgium), 84 breastfeeding mothers were recruited in rural communities in East and West Flanders and Flemish Brabant in 2009-2010. Polychlorinated biphenyl (PCB) congeners, organochlorine pesticides, brominated flame retardants, perfluorinated compounds, polychlorinated dibenzodioxines and dibenzofurans, and dioxin-like PCBs were measured in individual milk samples and in a pooled milk sample, while some additional pollutants were only measured in the pooled sample. For most pollutants, the concentrations in this study were lower or comparable to the concentrations measured in the pooled Belgian sample of the WHO human milk study of 2006, except for the pesticides dichlorodiphenyltrichloroethane DDT (+25% for ΣDDT and metabolites) and trans-nonachlor (+94%), and for the brominated flame retardant hexachlorocyclododecane HBCD (+153%). Perfluorinated compounds were for the first time determined in human milk samples from Belgium and the concentrations were comparable to those from other European countries. Also, interesting associations were found between the concentrations of POPs measured in human milk and personal characteristics as well as dietary habits of the study population. PFOS en PFOA concentrations were significantly higher in milk of primiparous participants compared to mothers who gave birth to their second child. Lower brominated PBDE congeners increased with increasing BMI of the mothers (p=0.01 for BDE 47, p=0.02 for BDE 99 and p=0.02 for BDE 100). Participants consuming milk or dairy products daily had significant higher concentrations of ΣDDTs (p=0.03) and oxychlordane (p=0.047) in their human milk samples.

Importance of clean-up for comparison of TEQ-values obtained by CALUX and chemo-analysis

This paper presents Chemically Activated LUciferine gene eXpression (CALUX) TEQ-values obtained for nine plasma samples following two different purification procedures, one of them involving fractionation. CALUX results obtained for the dioxin (DX) and dioxin + PCB (DX + PCB) fractions were then compared to the GC-HRMS TEQ-values calculated for the 17 polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (17 PCDD/F) and 17 PCDD/F + 4 cPCB congeners, respectively. The overestimation of the CALUX (DX fraction) TEQ-values in comparison with the chemo-analyses of the 17 PCDD/F is mainly explained by the presence of other AhR agonists, like brominated compounds. Otherwise, the constancy of the CALUX (DX + PCB fraction) TEQ-value which compares to increasing the GC-HRMS (17 PCDD/F + 4 cPCB) TEQ results raises questions concerning (1) the significance of CALUX results obtained without fractionation as well as (2) the toxicological effect of a cocktail of contaminants on the human health.

Analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples from the Flemish measurement network: correlation between the CALUX bioassay and GC-HRMS

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast, sensitive and inexpensive tool for the analysis of a high number of samples, the use of this technique in routine analysis of atmospheric deposition samples may be a valuable alternative for GC-HRMS. In this study, a validated CALUX method was used for the analysis of PCDD/Fs and dioxin-like PCBs in more than 90 atmospheric deposition samples for different locations in Flanders. The samples were taken in residential and agricultural areas, where a threshold limit of 21pgWHO-TEQm(-2)d(-1) for the sum of PCDD/Fs and dioxin-like PCBs was set, and in industrial zones and natural reserves, where no official threshold limit is available. The results from the Flemish measurement program showed correlation between CALUX and GC-HRMS for all the samples, originating from the different areas (R(2) of 0.81, 0.53 and 0.64 for dl-PCBs, PCDD/Fs and sum of both fractions, respectively). Median CALUX/GC-HRMS ratios of 2.0, 0.9 and 1.3 were reported for the PCDD/Fs, dioxin-like PCBs and the sum of both fractions, respectively. The results show that the CALUX bioassay is a valuable alternative tool for the classic GC-HRMS analysis of atmospheric deposition samples in the Flemish measurement network.

Multiple testing of food contact materials: a predictive algorithm for assessing the global migration from silicone moulds

For reasons of food safety, packaging and food contact materials must be submitted to migration tests. Testing of silicone moulds is often very laborious, since three replicate tests are required to decide about their compliancy. This paper presents a general modelling framework to predict the sample's compliance or non-compliance using results of the first two migration tests. It compares the outcomes of models with multiple continuous predictors with a class of models involving latent and dummy variables. The model's prediction ability was tested using cross and external validations, i.e. model revalidation each time a new measurement set became available. At the overall migration limit of 10 mg dm(-2), the relative uncertainty on a prediction was estimated to be ~10%. Taking the default values for α and β equal to 0.05, the maximum value that can be predicted for sample compliance was therefore 7 mg dm(-2). Beyond this limit the risk for false compliant results increases significantly, and a third migration test should be performed. The result of this latter test defines the sample's compliance or non-compliance. Propositions for compliancy control inspired by the current dioxin control strategy are discussed.

Effect of bacterial mineralization of phytoplankton-derived phytodetritus on the release of arsenic, cobalt and manganese from muddy sediments in the Southern North Sea. A microcosm study

Muddy sediments of the Belgian Continental Zone (BCZ) are contaminated by metals such as Co, As, Cd, Pb, and Ni. Previous studies have suggested that mineralization of phytodetritus accumulating each year on sediments might cause secondary contaminations of the overlying seawater (metal effluxes). The aim of the present research was to investigate these effluxes using a microcosm approach. Muddy sediments were placed in microcosms (diameter: 15 cm) and overlaid by phytodetritus (a mix of Phaeocystis globosa with the diatom Skeletonema costatum). The final suspension was 130.6 mg L(-1) (dw) and the final chlorophyll a content was 750 ± 35 μg L(-1) (mean ± SD). Natural seawater was used for controls. Microcosms were then incubated in the dark at 15°C during 7 days. Metals were monitored in overlying waters and microbial communities were followed using bacterial and nanoflagellate DAPI counts, thymidine incorporation, community level physiological profiling (CLPP) and fluorescein diacetate analysis (FDA). Benthic effluxes observed in sediments exposed to phytodetritus were always more elevated than those observed in controls. Large effluxes were observed for Mn, Co and As, reaching 1084 nmol m(-2)day(-1) (As), 512 nmol m(-2)day(-1) (Co), and 755 μmol m(-2)day(-1) (Mn). A clear link was established between heterotrophic microbial activity and metal effluxes. The onset of mineralization was very fast and started within 2h of deposition as revealed by CLPP. An increased bacterial production was observed after two days (8.7 mg Cm(-2)day(-2)) and the bacterial biomass appeared controlled by heterotrophic nanoflagellates. Calculations suggest that during phytoplankton blooms the microbial activity alone may release substantial amounts of dissolved arsenic in areas of the BCZ covered by muddy sediments.

Links between bacterial communities in marine sediments and trace metal geochemistry as measured by in situ DET/DGT approaches

Our current view about the relationship between metals and bacteria in marine sediments might be biased because most studies only use ex situ approaches to quantify metals. The aim of the present research was to compare ex situ and in situ methods of metal measurement (DET and DGT--diffusive equilibration or diffusive gradients in thin-films) and relate the results with two commonly used microbiological variables (bacterial biomass and bacterial diversity as revealed by DGGE). No previous studies have used such in situ approaches in microbial ecology. For biomass and most of the investigated trace metals (Ag, Cd, Sn, Cr, Ni, Cu, Pb, and Al) no significant correlations were found. The exceptions were Fe, Mn, Co, and As which behave like micronutrients. For bacterial diversity, no relevant relationships were found. We conclude that in situ methods are more adapted tools for microbial ecologists but that ex situ approaches are still necessary.

Quantification of PCDD/Fs and dioxin-like PCBs in small amounts of human serum using the sensitive H1L7.5c1 mouse hepatoma cell line: optimization and analysis of human serum samples from adolescents of the Flemish human biomonitoring program FLEHS II

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast and inexpensive tool for the throughput analysis of dioxin-like compounds in a large number of samples and requires only small sample volumes, the use of this technique in human biomonitoring programs provides a good alternative to GC-HRMS. In this study, a method for the separate analysis of PCDD/Fs and dioxin-like PCBs (dl-PCBs) in human serum with the new sensitive H1L7.5c1 mouse hepatoma cell line was optimized. Sample dilution factors of 5 and 2.4 were selected for routine analysis of respectively the PCDD/Fs and dl-PCBs. The validation studies showed that repeatability and within-lab reproducibility for the quality control (QC) standard were within the in-house criteria. A long-term within-lab reproducibility of 25% for the PCDD/F fraction and 41% for the dl-PCB fraction for the analysis of pooled serum samples, expressed as pg BEQ/g fat, was determined. CALUX recoveries of the spiked procedural blanks were within the acceptable in-house limits of 80-120% for both fractions and the LOQ was 30.3 pg BEQ/g fat for the PCDD/Fs and 14.5 pg BEQ/g fat for the dl-PCBs. The GC-HRMS recovery of a C13-spiked pooled serum sample was between 60 and 90% for all PCDD/F congeners and between 67 and 82% for the non-ortho PCBs. An adequate separation between both fractions was found. The CALUX/GC-HRMS ratio for a pooled serum sample was respectively 2.0 and 1.4 for the PCDD/Fs and the dl-PCBs, indicating the presence of additional AhR active compounds. As expected, a correlation was found between human serum samples analyzed with both the new H1L7.5c1 cell line and the more established H1L6.1c3 cell line. The geometric mean CALUX-BEQ values, reported for the adolescents of the second Flemish Environment and Health Study (FLEHS II) recruited in 2009-2010, were 108 (95% CI: 101-114) pg CALUX-BEQ/g fat for the PCDD/Fs and 32.1 (30.1-34.2) pg CALUX-BEQ/g fat for the dioxin-like PCBs.

Sources of PCDD/Fs, non-ortho PCBs and PAHs in sediments of high and low impacted transboundary rivers (Belgium-France)

PAHs, PCDD/Fs and non-ortho PCBs have been assessed in Yser and Upper-Scheldt river sediments. Higher contamination levels were observed in the Upper-Scheldt sediments: maximum concentrations for the 16 US-EPA PAHs, PCDD/Fs and non-ortho PCBs respectively amount to 8.9 mg kg(-1), 12 ng TEQ kg(-1) and 5.1 ng TEQ kg(-1). Diagnostic PAH ratios in sediments and atmospheric samples suggest that the PAH compounds are from pyrolytic origin, more specifically combustion processes. The huge consumption of coal in cokes-ovens and smelters and its use for house-heating in Northern France, although decreasing during the last decades, are in support of that suggestion. PCDD/F fingerprints in sediments and deposition material indicate that OCDD is the dominant congener. In addition use of pentachlorophenol (PCP) in the past led to a minor contribution of PCDD/Fs in our sediment samples. Non-ortho PCBs form a substantial fraction of the total TEQ concentrations observed in the sediments. Since the 1980s and 1990s a substantial reduction of the PCDD/F sediment concentrations is observed, but this is not the case for the PAHs.

CALUX measurements: statistical inferences for the dose-response curve

Chemical Activated LUciferase gene eXpression [CALUX] is a reporter gene mammalian cell bioassay used for detection and semi-quantitative analyses of dioxin-like compounds. CALUX dose-response curves for 2,3,7,8-tetrachlorodibenzo-p-dioxin [TCDD] are typically smooth and sigmoidal when the dose is portrayed on a logarithmic scale. Non-linear regression models are used to calibrate the CALUX response versus TCDD standards and to convert the sample response into Bioanalytical EQuivalents (BEQs). Several complications may arise in terms of statistical inference, specifically and most important is the uncertainty assessment of the predicted BEQ. This paper presents the use of linear calibration functions based on Box-Cox transformations to overcome the issue of uncertainty assessment. Main issues being addressed are (i) confidence and prediction intervals for the CALUX response, (ii) confidence and prediction intervals for the predicted BEQ-value, and (iii) detection/estimation capabilities for the sigmoid and linearized models. Statistical comparisons between different calculation methods involving inverse prediction, effective concentration ratios (ECR(20-50-80)) and slope ratio were achieved with example datasets in order to provide guidance for optimizing BEQ determinations and expand assay performance with the recombinant mouse hepatoma CALUX cell line H1L6.1c3.

Internal exposure to pollutants and sex hormone levels in Flemish male adolescents in a cross-sectional study: associations and dose-response relationships

Flanders is densely populated with much industry and intensive farming. Hormonal status of 14- to 15-year-old male adolescents was studied in relation to internal exposure to pollutants. A total of 887 participants were selected as a random sample of the adolescents residing in the study areas. Confounding factors and significant covariates were taken into account. Serum levels of testosterone, free testosterone and estradiol, and the aromatase index showed significant positive associations with serum levels of marker polychlorobiphenyls (sum of PCBs 138, 153, and 180) and of hexachlorobenzene (HCB) and a negative association with urinary cadmium concentration. Serum levels of estradiol also showed a positive association with serum levels of dichlorodiphenyldichloroethylene (DDE). A doubling of serum concentrations of marker PCBs and HCB and of urinary concentration of cadmium were, respectively, associated with an increase of 16.4% (P<0.00001) and 16.6% (P<0.001) and a decrease of 9.6% (P<0.001) in serum testosterone concentration. Similar findings were made after additional adjustment for concurrent exposures. Associations between biological effects and internal exposures were, in terms of the regression coefficient, often stronger at exposures below the median. Environmental exposures to pollutants resulting in "normal" levels of internal exposure were associated with quite substantial differences in hormone concentrations.

Internal exposure to pollutants and sex hormone levels in Flemish male adolescents in a cross-sectional study: associations and dose-response relationships

Flanders is densely populated with much industry and intensive farming. Hormonal status of 14- to 15-year-old male adolescents was studied in relation to internal exposure to pollutants. A total of 887 participants were selected as a random sample of the adolescents residing in the study areas. Confounding factors and significant covariates were taken into account. Serum levels of testosterone, free testosterone and estradiol, and the aromatase index showed significant positive associations with serum levels of marker polychlorobiphenyls (sum of PCBs 138, 153, and 180) and of hexachlorobenzene (HCB) and a negative association with urinary cadmium concentration. Serum levels of estradiol also showed a positive association with serum levels of dichlorodiphenyldichloroethylene (DDE). A doubling of serum concentrations of marker PCBs and HCB and of urinary concentration of cadmium were, respectively, associated with an increase of 16.4% (P<0.00001) and 16.6% (P<0.001) and a decrease of 9.6% (P<0.001) in serum testosterone concentration. Similar findings were made after additional adjustment for concurrent exposures. Associations between biological effects and internal exposures were, in terms of the regression coefficient, often stronger at exposures below the median. Environmental exposures to pollutants resulting in "normal" levels of internal exposure were associated with quite substantial differences in hormone concentrations.

Analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples from the Flemish measurement network: Optimization and validation of a new CALUX bioassay method

Since the CALUX (Chemically Activated LUciferase gene eXpression) bioassay is a fast, sensitive and inexpensive tool for the analysis of a high number of samples, validation of new methods is urgently needed. In this study, a new method for the analysis of PCDD/Fs and dioxin-like PCBs in atmospheric deposition samples with the CALUX bioassay was developed, optimized and validated. The method consists of 4 steps: filtration, extraction, clean up and bioassay analysis. To avoid the use of large amounts of toxic solvents, new techniques were used for filtration and extraction: a C18 filter was used instead of a liquid/liquid extraction and an Accelerated Solvent Extractor (ASE) was used instead of the traditional soxhlet extraction. After pre-oxidation of the sample extract, clean up was done using a multi-layer silica gel column coupled to a carbon column. The PCDD/F and PCB fractions were finally analyzed with the H1L7.5c1 and/or the H1L6.1c3 mouse hepatoma cell lines. The limit of quantification was 1.4pg CALUX-BEQm(-2)d(-1) for the PCBs and 5.6pgCALUX-BEQm(-2)d(-1) for the PCDD/Fs, when using the new sensitive H1L7.5c1 cell line. The GC-HRMS recovery for all PCDD/F congeners was between 55% and 112%, with a mean recovery of 90%. CALUX recoveries of spiked procedural blanks were between the accepted ranges of 80-120%. Repeatability and reproducibility were satisfactory and no interferences from metals were detected. The first results from the Flemish measurement program showed good correlation between CALUX and GC-HRMS.

[The use of platelet concentrates: platelet-rich plasma (PRP) and platelet-rich fibrin (PRF) in bone reconstruction prior to dental implant surgery]

The autologous platelet concentrates--Platelet-Rich Plasma (PRP) and Platelet-Rich Fibrin (PRF)--are used in various medical fields, particularly in oral and maxillofacial surgery. These concentrates contain high levels of growth factors, including the 3 isomers of PDGF (platelet-derived growth factor), 2 of the numerous transforming growth factors (TGF-beta), the insulinlike growth factor (IGF), the epithelial growth factor (EGF) and the vascular endothelial growth factor (VEGF), which are the key elements in wound healing, particularly in bone regeneration. Platelet concentrates are easy to apply in clinical practice and offer potential benefits including rapid wound healing and bone regeneration, and can therefore be considered to be new therapeutic adjuvants. In dental implant surgery they are used in bone reconstruction prior or concomitant to implant procedures, and also for dental extraction socket preservation. Their use result in enhanced bone graft density and maturation. A literature review on the use of PRP/PRF in maxillofacial and dental implant surgery is proposed.

Mercury accumulation in fish species from the Persian Gulf and in human hair from fishermen

Total and methylmercury concentrations were assessed in muscle and liver of 141 fish samples from the northern part of the Persian Gulf. All fish samples belonged to five different species: grunt, flathead, greasy grouper, tiger-tooth croaker, and silver pomfret. In addition, Hg and methylmercury were analyzed in scalp hair of 19 fishermen living in the same coastal stations of the Persian Gulf and consuming several fish meals a week. Total mercury concentrations in fish muscle and liver ranged from 0.01 to 1.35 microg g(-1) w.w. and from 0.02 to 1.30 microg g(-1) w.w., respectively. In fish muscle, 3% of the Hg concentrations were higher than 0.5 microg g(-1) w.w., which corresponds to the maximum acceptable WHO level, while 9% were in the range of polluted fish (between 0.3 and 0.5 microg g(-1) w.w.). The highest mercury concentrations in fish muscle were observed in flathead fish at Abadan (average of 0.68 microg g(-1) w.w.). Methylmercury fractions in fish muscle and liver amount to 34-99% (median 64%) and 24-70% (median 43%), respectively. The mean total Hg concentration in the fishermen's scalp hair amounted to 2.9 +/- 2.2 microg g(-1), with 68% in the form of methylmercury. Ninety-five percent of the Hg levels in the fishermen's hair were below 10 microg g(-1), which is the WHO warning limit. In addition, relationships between the mercury levels in hair, on the one hand, and exposure-related factors such as Hg levels in specific fish species, regional differences, and number of fish meals, on the other hand, are discussed. It appears that a significant correlation for example exists between Hg levels human hair and fish muscle or human hair and age and that mean mercury levels in fish muscle and human hair decreased from western (Abadan) to eastern (Abbas port) coastal sites.