Valence-State-Engineered Electrochemiluminescence from Au Nanoclusters

To determine the intrinsic effects of body elements on the electrochemiluminescence (ECL) of metal nanoclusters (NCs), herein, a valence-state engineering strategy is developed to adjust the NCs' ECL with bovine serum albumin (BSA)-stabilized AuNCs as a model, in which engineering the valence state of the Au body element, i.e., Au(0) and Au(I), is performed via successively reducing the precursor AuCl₄^- to Au(I) and Au(0) with BSA. The obtained BSA-AuNCs/N₂H₄ system leads to three anodic ECL processes at 0.37 (ECL-1), 0.85 (ECL-2), and 1.45 V (ECL-3). ECL-1 is generated from the BSA-Au(0) section of BSA-AuNCs in a surface-defect-involved route and is much stronger and red-shifted compared to ECL-2 and ECL-3, which are generated from the BSA-Au(I) section of BSA-AuNCs in the band-gap-engineered route. Each of the anodic ECL processes can be selectively generated and/or suppressed via adjusting the Au(I)/Au(0) ratio of BSA-AuNCs, tunable ECL generation route, and triggering potential, and the emission intensity and waveband of metal NCs are conveniently achieved in body-element-involved valence-state engineering.

Electrochemiluminescence Sensor based on Electrospun Crosslinked Carbon Nanofibers for the Detection of Difenidol Hydrochloride

BACKGROUND

Cross-linked porous carbon nanofibers (CNF) were successfully prepared by electrospinning and high-temperature carbonization. Polyacrylonitrile (PAN) as the carbon source and genipin as the cross-linking agent were used to prepare cross-linked porous carbon nanofibers (CNF).

MATERIALS AND METHODS

The field emission scanning electron microscopy (SEM), transmission electron microscope (TEM), automatic specific surface and porosity analyzer Brunner Emmet Teller (BET), X-ray diffraction (XRD), and a laser confocal microspectroscope (Raman, XploRA PLUS, Horiba) were used to characterize the materials. The CNF suspension was dropped on the surface of the bare glassy carbon electrode by the drip coating method to obtain a CNF-modified electrode. Cyclic voltammetry was used to study the electrochemiluminescence behavior of difenidol hydrochloride on CNF-modified glassy carbon electrode (Glassy Carbon Electrode, GCE).

RESULTS AND DISCUSSION

Herein, we synthesised a kind of crosslinked carbon nanofibers and designed a novel ECL biosensor. Under the optimal conditions, the concentration of difenidol hydrochloride exhibited a linear relationship with the peak current in the range of 8.0×10^-8 to 1.0×10^-4 mol/L, with the correlation coefficient of R²=0.997, and a low detection limit (1.2×10^-8 mol/L). Difenidol hydrochloride in difenidol hydrochloride tablets was tested, and the recovery rate of sample addition was estimated to be 83.17%-92.17%, and the RSD value to be <5.0%. The designed platform exhibited excellent analytical performance for difenidol hydrochloride determination.

Ultrasensitive Electrochemiluminescence Immunoassay Based on Signal Amplification of 0D Au-2D WS2 Nano-Hybrid Materials

In this study, we proposed a novel Ru(bpy)₃²⁺-Au-WS₂ nanocomposite (Ru-Au-WS₂ NCs) nano-hybrid electrochemiluminescence (ECL) probe for the highly sensitive detection of carcinoembryonic antigen (CEA). This system utilizes Au nanoparticles (Au NPs) as a bridge to graft the high-performance of a Ru(bpy)₃²⁺ ECL emitter and WS₂ nanosheet with excellent electrochemical performance into an ECL platform, which shows outstanding anodic ECL performance and biosensing platform due to the synergetic effect and biocompatibility of Au NPs and WS₂ nanosheet. Because the ECL intensity of Ru(bpy)₃²⁺ is sensitively affected by the antibody-antigen insulator, a preferable linear dependence was obtained in the concentration range of CEA from 1 pg·mL^-1 to 350 ng·mL^-1 with high selectivity (LOD of 0.3 pg·mL^-1, S/N = 3). Moreover, the ECL platform had good reproducibility and stability and exhibited excellent anti-interference performance in the detection process of CEA. We believe that the platform we have developed can expand the opportunities for the detection of additional high specificity-related antibodies/antigens and demonstrate broad prospects for disease diagnosis and biochemical research.

Electrochemiluminescence Aptasensor Based on Gd(OH)3 Nanocrystalline for Ochratoxin A Detection in Food Samples

In the present study, the electrochemiluminescence (ECL) properties of Gd(OH)₃ nanocrystals with K₂S₂O₈ as the cathode coreactant were studied for the first time. Based on the prominent ECL behavior of this material and the excellent specificity of the aptamer technique, an ECL aptasensor for the detection of ochratoxin A (OTA) was formulated successfully. Over an OTA concentration range of 0.01 pg mL^-1 to 10 ng mL^-1, the change in the ECL signal was highly linear with the OTA concentration, and the limit of detection (LOD) was 0.0027 pg mL^-1. Finally, the ECL aptasensor was further used to detect OTA in real samples (grapes and corn) and satisfactory results were obtained, which indicated that the built method is expected to be applied in food detection.

Rapid determination of SARS-CoV-2 nucleocapsid proteins based on 2D/2D MXene/P–BiOCl/Ru(bpy)32+ heterojunction composites to enhance electrochemiluminescence performance

At the end of 2019, the novel coronavirus disease 2019 (COVID-19), a cluster of atypical pneumonia caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has been known as a highly contagious disease. Herein, we report the MXene/P–BiOCl/Ru(bpy)₃²⁺ heterojunction composite to construct an electrochemiluminescence (ECL) immunosensor for SARS-CoV-2 nucleocapsid protein (CoVNP) determination. Two-dimensional (2D) material ultrathin phosphorus-doped bismuth oxychloride (P–BiOCl) is exploited and first applied in ECL. 2D architectures MXene not only act as “soft substrate” to improve the properties of P–BiOCl, but also synergistically work with P–BiOCl. Owing to the inimitable set of bulk and interfacial properties, intrinsic high electrochemical conductivity, hydrophilicity and good biocompatible of 2D/2D MXene/P–BiOCl/Ru(bpy)₃²⁺, this as-exploited heterojunction composite is an efficient signal amplifier and co-reaction accelerator in the presence of tri-n-propylamine (TPA) as a coreactant. The proposed MXene/P–BiOCl/Ru(bpy)₃²⁺-TPA system exhibits a high and stable ECL signal and achieves ECL emission quenching for “signal on-off” recognition of CoVNP. Fascinatingly, the constructed ECL biosensor towards CoVNP allows a wide linear concentration range from 1 fg/mL to 10 ng/mL and a low limit of detection (LOD) of 0.49 fg/mL (S/N = 3). Furthermore, this presented strategy sheds light on designing a highly efficient ECL nanostructure through the combination of 2D MXene architectures with 2D semiconductor materials in the field of nanomedicine. This ECL biosensor can successfully detect CoVNP in human serum, which can promote the prosperity and development of diagnostic methods of SARS-CoV-2.

Nanomaterials-Based Electrochemiluminescence Biosensors for Food Analysis: Recent Developments and Future Directions

Developing robust and sensitive food safety detection methods is important for human health. Electrochemiluminescence (ECL) is a powerful analytical technique for complete separation of input source (electricity) and output signal (light), thereby significantly reducing background ECL signal. ECL biosensors have attracted considerable attention owing to their high sensitivity and wide dynamic range in food safety detection. In this review, we introduce the principles of ECL biosensors and common ECL luminophores, as well as the latest applications of ECL biosensors in food analysis. Further, novel nanomaterial assembly strategies have been progressively incorporated into the design of ECL biosensors, and by demonstrating some representative works, we summarize the development status of ECL biosensors in detection of mycotoxins, heavy metal ions, antibiotics, pesticide residues, foodborne pathogens, and other illegal additives. Finally, the current challenges faced by ECL biosensors are outlined and the future directions for advancing ECL research are presented.

Studies on Annihilation and Coreactant Electrochemiluminescence of Thermally Activated Delayed Fluorescent Molecules in Organic Medium

Very recently, there is a great research interest in electrochemiluminescence (ECL) featuring thermally activated delayed fluorescence (TADF) properties, i.e., TADF-ECL. It is appealing since the earlier reports in this topic well-confirmed that this strategy has a great potential in achieving all-exciton-harvesting ECL efficiency under electrochemical excitation, which is a breakthrough in the topic of organic ECL. However, organic phase electrochemistry and ECL studies surrounding TADF-ECL are still extremely rare. Especially, the ECL spectra of previous reported TADF emitters are still very different from their PL spectra. In this work, we systematically measure and discuss the liquid electrochemistry and ECL behavior of two typical TADF molecules in organic medium. Most importantly, we verify for the first time that the ECL spectra of them (coreactant ECL mode) are identical to their PL spectra counterparts, which confirms the effectiveness of TADF photophysical properties in the coreactant ECL mode in practice.

Schiff Base Complexes with Covalently Anchored Luminophores: Self-Enhanced Electrochemiluminescence Detection of Neomycin

A novel electrochemiluminescence (ECL) amplification strategy was established aiming to overcome the inherent shortcomings of the current oxygen (O₂) coreactant ECL systems. Macrocyclic Schiff base Fe complexes were rationally designed as a novel integrated ECL emitter by iminium linkage between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and 1,10-phenanthroline-2,9-dicarbaldehyde (PDL) and postmetalation of the macrocyclic Schiff base. Covalently combining luminophore ABEI with a catalytic center endowed the novel ECL emitter with both remarkable redox electrocatalytic properties and significantly enhanced ECL efficiency. The high content of ferrous iron and the dominantly active low-spin Fe state greatly contributed to the inherent catalytic activity for O₂ activation. The rational modification of luminophore optimized the spatial distribution and simultaneously shortened the species transport distance of coreactant radicals generated in situ from dissolved O₂, resulting in significantly self-enhanced ECL efficiency. Neomycin, which posed a growing threat to aquatic biodiversity and environmental safety, as the model antibiotic was successfully detected with a detection limit of 0.21 pM (S/N = 3), clarifying a promising application prospect of this new luminophore-embedded ECL amplification strategy in biological analysis and environmental monitoring.

Ultrahighly Sensitive Sandwich-Type Electrochemical Immunosensor for Selective Detection of Tumor Biomarkers

Herein, a novel sandwich-type immunosensor was designed using Pt nanoparticle-decorated SnS₂ nanoplates (Pt@SnS₂) as a matrix and N,B-doped Eu MOF (N,B-Eu MOF) nanospheres as a signal amplifier. In Pt@SnS₂, Pt nanoparticles (NPs) enhance the surface electron transport capability and electrochemiluminescence (ECL) performance of SnS₂ nanoplates. The dual "antenna" effect of 5-boronoisophthalic acid (5-bop) and 5-nitroisophthalic acid (5-nop) enables the N,B-Eu MOFs to show very good ECL performance at the cathode. In the presence of the target carcinoembryonic antigen (CEA), the sandwich-type immunosensor provides specific immune responses, and the ECL signal of the immunosensor is greatly amplified by the signal probe N,B-Eu MOFs. In view of the above, the immunosensor was successfully applied for highly sensitive and selective detection of CEA with a detection limit of 0.06 pg·mL^-1. This sensor exhibits high sensitivity and specificity, excellent stability, good reproducibility, and good practicability in real human serum.

Comparison of Mobile Phone and CCD Cameras for Electrochemiluminescent Detection of Biogenic Amines

Biogenic amines are an important and widely studied class of molecules due to their link to the physiological processes of food-related illnesses and histamine poisoning. Electrochemiluminescent (ECL) detection offers an inexpensive and portable analytical method of detection for biogenic amines when coupled with recent advancements in low-cost carbon-based electrodes and a smartphone camera. In this work, a mobile phone camera was evaluated against a piece of conventional instrumentation, the charge-coupled device, for the detection of ECL from the reaction of biogenic amines with the luminescent compound tris(2,2'-bipyridyl)ruthenium(II). Assisted by a 3D-printed light-tight housing, the mobile phone achieved limits of detection of 127, 425 and 421 μM for spermidine, putrescine, and histamine, respectively. The mobile phone's analytical figures of merit were lesser than the CCD camera but were still within the range to detect contamination. In an exploration of real-world samples, the mobile phone was able to determine the contents of amines in skim milk on par with that of a CCD camera.

Shell-Isolated Nanoparticle-Enhanced Electrochemiluminescence

Enhanced electrochemiluminescence (ECL) aims to promote higher sensitivity and obtain better detection limit. The core-shell nanostructures, owing to unique surface plasmon resonance (SPR) enabling distance-dependent strong localized electromagnetic field, have attracted rising attention in enhanced ECL research and application. However, the present structures usually with porous shell involve electrocatalytic activity from the metal core and adsorption effect from the shell, which interfere with practical SPR enhancement contribution to ECL signal. Herein, to exclude the interference and unveil exact SPR-enhanced effect, shell-isolated nanoparticles (SHINs) whose shell gets thicker and becomes pinhole-free are developed by modifying pH value and particles concentration. Furthermore, allowing for the distribution of hotspots and stronger enhancement, excitation intensity and ECL reaction layer thickness are mainly investigated, and several types of SHINs-enhanced ECL platforms are prepared to fabricate distinct hotspot distribution via electrostatic attraction (submonolayer) and a layer-by-layer deposition method (monolayer). Consequently, the strongest enhancement up to ≈250-fold is achieved by monolayer SHINs with 10 nm shell, and the platform is applied in a "turn-off" mode sensing for dopamine. The platform provides new guidelines to shell preparation, interface engineering and hotspots fabrication for superior ECL enhancement and analytical application with high performance.

Highly Efficient PTCA/Co3O4/CuO/S2O82- Ternary Electrochemiluminescence System Combined with a Portable Chip for Bioanalysis

Herein, we reported an efficient electrochemiluminescence (ECL) biosensor chip for sensitive detection of neuron-specific enolase (NSE). First, 3,4,9,10-perylenetetracarboxylic acid with good luminescence characteristics was used as a luminophore to obtain a stable ECL signal. Subsequently, hollow porous Co₃O₄/CuO concave polyhedron nanocages (CPNCs) were designed as co-reaction promoters to amplify the luminescence signals for highly sensitive trace detection of NSE. In brief, the rapid cyclic conversion of Co³⁺/Co²⁺ and Cu²⁺/Cu⁺ redox pairs could continuously catalyze the reduction of persulfate (S₂O₈^2-), thus providing a large number of essential active intermediates (SO₄^•-) for ECL emission. Meanwhile, the unique structure of Co₃O₄/CuO CPNCs possessed a large specific surface area, which greatly improved its catalytic efficiency. Third, NKFRGKYKC was developed as an affinity ligand for specific antibody fixation, which improved incubation efficiency and protected bioactivity of antibodies. Finally, we independently designed a microchip and applied it for ECL detection to improve the practical application ability of the sensor. The developed biosensor exhibited good sensitivity with a wide linear range (10 fg/mL to 100 ng/mL) and a low detection limit (3.42 fg/mL), which played an active role in the clinical application of sensing analysis.

Enhanced Sensing Performance of a Microchannel-Based Electrochemiluminescence Biosensor for Adenosine Triphosphate via a dsDNA Superstructure Amplification Strategy

The sensing performance of a microchannel-based electrochemiluminescence (ECL) biosensor is related to the change ratio of charge density on the surface of microchannels caused by a target recognition reaction. In this study, adenosine triphosphate (ATP) served as a model target. The dsDNA superstructures containing a capture probe (CP, containing an ATP aptamer sequence) and alternating units of ssDNA probes of P1 and P2, CP/(P1/P2)_n, were grafted onto the inner wall of microchannels first. The CP in dsDNA superstructures captured ATP molecules, causing the release of dsDNA fragments containing alternating units of P1 and P2, (P1/P2)_n. The target recognition reaction significantly changed the charge density of microchannels, which altered the ECL intensity of the (1,10-phenanthroline)ruthenium(II)/tripropylamine system in the reporting interface. The ECL intensity of the constructed system had a linear relationship with the logarithm of ATP concentration ranging from 1 fM to 100 pM with a detection limit of 0.32 fM (S/N = 3). The biosensor was successfully applied to detect ATP in rat brains.

Recent Advances in Single Cell Analysis by Electrochemiluminescence

Understanding biological mechanisms operating in cells is one of the major goals of biology. Since heterogeneity is the fundamental property of cellular systems, single cell measurements can provide more accurate information about the composition, dynamics, and regulatory circuits of cells than population-averaged assays. Electrochemiluminescence (ECL), the light emission triggered by electrochemical reactions, is an emerging approach for single cell analysis. Numerous analytes, ranging from small biomolecules such as glucose and cholesterol, proteins and nucleic acids to subcellular structures, have been determined in single cells by ECL, which yields new insights into cellular functions. This review aims to provide an overview of research progress on ECL principles and systems for single cell analysis in recent years. The ECL reaction mechanisms are briefly introduced, and then the advances and representative works in ECL single cell analysis are summarized. Finally, outlooks and challenges in this field are addressed.

Photoswitchable CRISPR/Cas12a-Amplified and Co3O4@Au Nanoemitter Based Triple-Amplified Diagnostic Electrochemiluminescence Biosensor for Detection of miRNA-141

In this work, a CRISPR/Cas12a initiated switchable ternary electrochemiluminescence (ECL) biosensor combined with a Co3O4@Au nanoemitter is presented for the in vitro monitoring of miRNA-141. Benefiting from the advantages of high-throughput cargo payload capability and superconductivity, three-dimensional reduced graphene oxide (3D-rGO) was designated as an introductory conducting stratum of a paper working electrode (PWE). With the collaborative participation of Co3O4@Au NPs, the transmutation of TPrA in the Ru(bpy)32+/TPrA system can be riotously expedited into exorbitant free radical ions TPrA•, which provoked the exaggeration of the ECL signal. Moreover, the programmable enzyme-free hybrid chain reaction (HCR) amplifier on the PWE surface accurately anchored the assembly of nucleic acid tandem and accomplished the secondary recursion of the signal. Impressively, the multifunctional CRISPR/Cas12a with nonspecific cis/trans-splitting decomposition manipulated the photoswitch of the "on-off" signal state that avoided the false-positive diagnosis. The presented multistrategy cooperative biosensor demonstrated extraordinary sensitivity and specificity, with a low detection limit of 3.3 fM (S/N = 3) in the concentration scope from 10 fM to 100 nM, which fully corresponded to the expectation. Overall, this innovative methodology paved a generous avenue for evaluating multifarious biotransformations and provided a tremendous impetus to the development of real-time diagnosis and clinical detection of other biomarkers.

A novel nanosponge-hydrogel system-based ECL biosensor for uric acid detection

In this work, a highly efficient electrochemiluminescence (ECL) biosensor has been developed based on the nanosponge-hydrogel system for uric acid (UA) detection. Firstly, the nanosponge consists of PLGA nanoparticles immobilized with MoS₂ QDs and urate oxidase (UAO). The remarkable loading capability of PLGA nanoparticles can load much biomolecules and QDs for the specific recognition of uric acid. Urate oxidase on the nanosponge can catalyze uric acid to generate H₂ O₂ in situ, which further trigger the ECL signal of MoS₂ QDs. Furthermore, the biocompatible acrylamide-based hydrogel not only effectively retains the functionalities of the chimeric nanosponge-hydrogel, but also provides the structural integrity and engineering flexibility on the electrode in the ECL sensing application. Meanwhile, there are plenty of ester groups and amide bonds in the nanosponge-hydrogel structure. So, much electron can be excited due to a large number of lone electron pairs on oxygen and nitrogen atom in the ECL process. It results in 7-fold ECL enhancement of MoS₂ QDs. Finally, the nanosponge-hydrogel structure-based ECL biosensor has been successfully used in actual clinical serum assays. It shows a good analytical performance for the uric acid detection (100 ~ 500 μmol/L) with a detection limit of 20 μmol/L.

Band-Edge Effect-Induced Electrochemiluminescence Signal Amplification Based on Inverse Opal Photonic Crystals for Ultrasensitive Detection of Carcinoembryonic Antigen

Photonic crystals (PCs) have emerged as a promising electrochemiluminescence (ECL) matrix in the domain of immunoassay. Making maximum use of light manipulation properties of PCs is highly desired for improving the sensitivity. In this work, we proposed a band-edge effect-induced ECL enhancement strategy based on silica inverse opal PCs (SIOPCs). By fine-tuning the lattice constant and carefully calibrating the stopband position, we found that the band edge of the stopband exerted significant influences on the ECL intensity and spectral distribution. The high density of states at the blue edge of the photonic band gap increased the radiative transition probability of ECL emitters and enhanced the photon extraction during propagation, giving rise to ∼20-fold ECL signal amplification accompanied by a redistributed ECL spectrum for the Ru(bpy)₃²⁺-TPrA system. In combination with the intrinsic structural superiority, like large specific surface area and interconnected macropores, the developed SIOPC electrode was successfully applied in constructing a sandwich-type immunosensor. The fabricated immunosensor displayed a very low detection limit of 0.032 pg/mL and a wide linear range of 0.1 pg/mL-150 ng/mL for a carcinoembryonic antigen assay, showing its potential application in disease diagnosis.

Electrochemiluminescence Biosensor for Hyaluronidase Based on the Adjustable Electrostatic Interaction between the Surface-Charge-Controllable Nanoparticles and Negatively Charged Electrode

A novel electrochemiluminescence (ECL) biosensor for hyaluronidase (HAase) based on the adjustable electrostatic interaction between the surface-charge-controllable nanoparticles and negatively charged electrode has been devised. Hyaluronic acid (HA)-coated amino-modified ruthenium bipyridine-doped silica nanoparticles (Ru@SiO₂-NH₂@HA NPs) have been synthesized and act as ECL indicators, and the surface of this particle is negatively charged because HA contains a large amount of OH- and COO-. The strong electrostatic repulsion between the Ru@SiO₂-NH₂@HA NPs and negatively charged indium tin oxide (ITO) electrode surface leads to the detection of a low-intensity ECL signal. In the presence of HAase, the HA on the surface of the Ru@SiO₂-NH₂@HA NPs can be decomposed, and the particles can be transformed into positively charged amino-modified ruthenium bipyridine-doped silica nanoparticles (Ru@SiO₂-NH₂ NPs), which can be concentrated near the surface of the ITO electrode through electrostatic attraction, and result in the detection of an enhanced ECL signal. The ECL of the system has a good linear relationship with HAase concentration in the range of 2.0-60 U/mL, and the limit of detection was 0.37 U/mL. The designed biosensor had been applied to detect the target in real samples with satisfied results.

A simple electrochemiluminesecence aptasenor using a GCE/NCQDs/aptamers for detection of Pb

An electrochemiluminescence (ECL) aptasensor was prepared to detect Pb²⁺ with nitrogen-doped carbon quantum dots (NCQDs) as ECL materials. To prepare the working electrode, NCQDs with carboxyl groups were loaded on a glassy carbon electrode (GCE) and then Pb²⁺ aptamers were covalently bound to the NCQDs to form a stable GCE/NCQDs/aptamers. On addition of Pb²⁺, the chain aptamers change to a pb²⁺ G-quadruplex conformation, which lead to a large decrease in the ECL intensity. The variation of intensity and the logarithm of the Pb²⁺ concentration had a good linear relationship (R² = 0.998). The detection range was wide (50 pM to 387.9 nM) with a low detection limit (18.9 pM). In interference experiments, the ECL Pb²⁺ aptasensor did not suffer from interference and it had good stability. The NCQDs ECL aptasensor can detect Pb²⁺ quickly and accurately, and provides a fast and efficient method for detection of Pb²⁺. Compared with literatures, the Pb²⁺ aptasensor has simpler preparation process, lower cost; furthermore, it is more environmentally friendly.

Controllable Enhanced Ru(bpy)32+ Electrochemiluminescence Detection Systems Based on Eu@MOF253@AuNPs/GCE for the Sensitive Detection of Carbaryl in Food

In this study, an electrochemiluminescence detection system for the sensitive detection of carbaryl was constructed based on the dual identification of Eu@MOF253, which has a recognition effect on carbaryl, and the electrochemiluminescence system of Ru(bpy)₃²⁺/S₂O₈^2-, which can react with carbaryl in a redox reaction. This method not only overcame the weakness of the electrochemiluminescence instability of the Ru(bpy)₃²⁺/S₂O₈^2- system but also changed the sensitivity of the sensing detection system to the target by adjusting the concentration of Ru(bpy)₃²⁺ and then proposed a detection strategy with a controllable detection range. After analyzing the electrochemiluminescence signal change mechanism of this system and optimizing the detection conditions, it was concluded that the strategy has good linear detection of carbaryl in the range of 1-1000 and 0.02-0.3 μg L^-1, and the detection limits were 0.058 and 0.014 μg L^-1. Finally, the strategy was also successfully applied to the detection of actual samples.

Validation and performance of a multiplex serology assay to quantify antibody responses following SARS-CoV-2 infection or vaccination

Objectives

Robust, quantitative serology assays are required to accurately measure antibody levels following vaccination and natural infection. We present validation of a quantitative, multiplex, SARS‐CoV‐2, electrochemiluminescent (ECL) serology assay; show correlation with two established SARS‐CoV‐2 immunoassays; and present calibration results for two SARS‐CoV‐2 reference standards.

Methods

Precision, dilutional linearity, ruggedness, analytical sensitivity and specificity were evaluated. Clinical sensitivity and specificity were assessed using serum from prepandemic and SARS‐CoV‐2 polymerase chain reaction (PCR)‐positive patient samples. Assay concordance to the established Roche Elecsys® Anti‐SARS‐CoV‐2 immunoassay and a live‐virus microneutralisation (MN) assay was evaluated.

Results

Standard curves demonstrated the assay can quantify SARS‐CoV‐2 antibody levels over a broad range. Assay precision (10.2−15.1% variability), dilutional linearity (≤ 1.16‐fold bias per 10‐fold increase in dilution), ruggedness (0.89−1.18 overall fold difference), relative accuracy (107−118%) and robust selectivity (102−104%) were demonstrated. Analytical sensitivity was 7, 13 and 7 arbitrary units mL⁻¹ for SARS‐CoV‐2 spike (S), receptor‐binding domain (RBD) and nucleocapsid (N) antigens, respectively. For all antigens, analytical specificity was > 90% and clinical specificity was 99.0%. Clinical sensitivities for S, RBD and N antigens were 100%, 98.8% and 84.9%, respectively. Comparison with the Elecsys® immunoassay showed ≥ 87.7% agreement and linear correlation (Pearson r of 0.85, P < 0.0001) relative to the MN assay. Conversion factors for the WHO International Standard and Meso Scale Discovery® Reference Standard are presented.

Conclusions

The multiplex SARS‐CoV‐2 ECL serology assay is suitable for efficient, reproducible measurement of antibodies to SARS‐CoV‐2 antigens in human sera, supporting its use in clinical trials and sero‐epidemiology studies.

Patients with severe COVID-19 do not have elevated autoantibodies against common diagnostic autoantigens

OBJECTIVES

Infection by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), the causative pathogen of coronavirus disease 2019 (COVID-19) presents occasionally with an aberrant autoinflammatory response, including the presence of elevated circulating autoantibodies in some individuals. Whether the development of autoantibodies against self-antigens affects COVID-19 outcomes remains unclear. To better understand the prognostic role of autoantibodies in COVID-19, we quantified autoantibodies against 23 markers that are used for diagnosis of autoimmune disease. To this end, we used serum samples from patients with severe [intensive care unit (ICU)] and moderate (ward) COVID-19, across two to six consecutive time points, and compared autoantibody levels to uninfected healthy and ICU controls.

METHODS

Acute and post-acute serum (from 1 to 26 ICU days) was collected from 18 ICU COVID-19-positive patients at three to six time points; 18 ICU COVID-19-negative patients (sampled on ICU day 1 and 3); 21 ward COVID-19-positive patients (sampled on hospital day 1 and 3); and from 59 healthy uninfected controls deriving from two cohorts. Levels of IgG autoantibodies against 23 autoantigens, commonly used for autoimmune disease diagnosis, were measured in serum samples using MSD^® U-PLEX electrochemiluminescence technology (MSD division Meso Scale Discovery^®), and results were compared between groups.

RESULTS

There were no significant elevations of autoantibodies for any of the markers tested in patients with severe COVID-19.

CONCLUSIONS

Sample collections at longer time points should be considered in future studies, for assessing the possible development of autoantibody responses following infection with SARS-CoV-2.

Dumbbell Plate-Shaped AIEgen-Based Luminescent MOF with High Quantum Yield as Self-Enhanced ECL Tags: Mechanism Insights and Biosensing Application

It is widely known that high-performance electrochemiluminescence (ECL) emitters play a crucial part in improving the detection sensitivity of the ECL strategy. Through the combination of aggregation-induced emission luminogens (AIEgens), 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene (H₄ TCBPE) with Zr(IV) cations, a dumbbell plate-shaped metal-organic framework (MOF) with high luminous efficiency is synthesized as ECL tags. The resultant MOF exhibits stronger ECL activity than those of H₄ TCBPE monomers and aggregates. Herein, this phenomenon is defined as the coordination-triggered electrochemiluminescence (CT-ECL) enhancement effect. Furthermore, the nearly matched ECL and photoluminescence (PL) spectra imply the bandgap emission mechanism. Remarkably, polyethyleneimine (PEI) as the coreactant is covalently connected with MOF to form the uniquely self-enhanced ECL complex of Zr-TCBPE-PEI, where the robust ECL signal is captured owing to the intramolecular-like coreaction acceleration. Based on the resonance energy transfer (RET) behavior, the AuPd@SiO₂ composite is designed as the high-efficiency quencher. In this manner, an innovative and ultrasensitive ECL sensor is constructed for neuron-specific enolase (NSE) detection through sandwich-type immunoreaction, with the detection limit down to 52 fg ml^-1 . The present study has gone some way toward designing MOF-based self-luminescent ECL materials, thus paving a new avenue to expand the late-model ECL emitters for immunoassay.

Sputum biomarkers during acute severe asthma attacks in children-a case-control study

AIM

To study sputum mediator profiles pattern in children with acute severe asthma, compared with stable asthma and healthy controls. The mechanisms of acute severe asthma attacks, such as biomarkers cascades and immunological responses, are poorly understood.

METHODS

We conducted a prospective observational case-control study of children aged 5 to 17 years, who presented to hospital with an asthma attack. Children with stable asthma were recruited during outpatient asthma clinic visits. Control children without an asthma diagnosis were recruited from surgical wards. Sputum mediator profiles were measured, and sputum leukocyte differential cell counts were generated.

RESULTS

Sputum data were available in 48 children (acute asthma; n = 18, stable asthma; n = 17, healthy controls; n = 13). Acute-phase biomarkers and neutrophil attractants such as IL-6 and its receptor, IL-8 and cytokines linked with bacterial signals, including TNF-R1 and TNF-R2, were elevated in asthma attacks versus stable asthma and healthy controls. T-cell attractant cytokines, associated with viral infections, such as CCL-5, CXCL-10 and CXCL-11, and CXCL-9 (secreted from eosinophils after a viral trigger) were also raised.

CONCLUSION

Mediator profiles consistent with bacterial and viral respiratory infections, and T2 inflammation markers co-exist in the sputum of children with acute severe asthma attacks.

Imidazole Compounds: Synthesis, Characterization and Application in Optical Analysis

Imidazole is a five-membered heterocyclic ring containing three carbon atoms, two nitrogen atoms, and two double bonds. Among two nitrogen atoms, one of which carries with a hydrogen atom is a pyrrole-type nitrogen atom, another is a pyridine type nitrogen atom. Hence, the imidazole ring belongs to the π electron-rich aromatic ring and can accept strong suction to the electronic group. Moreover, the nitrogen atom of the imidazole ring is coordinated with metal ions to form metal-organic frameworks. In recent years, because of imidazole compounds' unique optical properties, their applications have attracted more and more attention in optical analysis. Thus, this review has summarized the synthesis, characterization, and application with emphasis on the research progress of imidazole compounds in optical analysis, including fluorescence probe, colorimetric probe, electrochemiluminescence sensor, fiber optical sensor, surface plasmon resonance, etc. This paper will suggest the direction for the development of imidazole-containing sensors with high sensitivity and selectivity.