Dental and skeletal characterization of the BR-1 minipig

This study was designed to characterize the development of oral structures in the BR-1 minipig and to compare these data with literature reports on domestic swine and other minipig lineages. Twelve male minipigs were anesthetized and given physical and radiographic examinations. The presence and chronology of tooth eruption from 3 to 15 months of age were assessed, and the radiographic results were interpreted by two certified researchers, who obtained a high index of agreement (kappa>0.81). The eruption chronology was similar to that reported for domestic swine and other minipig lineages. The results indicate that it is possible to use the BR-1 minipig in dental research.

An analysis of maxillary anterior teeth: Facial and dental proportions

STATEMENT OF PROBLEM

The size and form of the maxillary anterior teeth are important in achieving pleasing dental and facial esthetics. However, little scientific data have been defined as criteria for evaluating these morphological features.

PURPOSE

This study analyzed the clinical crown dimensions of maxillary anterior teeth to determine whether consistent relationships exist between tooth width and several facial measurements in a subset of the Turkish population.

MATERIAL AND METHODS

Full-face and anterior tooth images of 100 Turkish dental students viewed from the front and engaged in maximum smiling were recorded with digital photography under standardized conditions. Gypsum casts of the maxillary arches of the subjects were also made. The dimensions of the anterior teeth, the occurrence of the golden ratio, the difference between the actual and perceived sizes, and the relationship between the anterior teeth and several facial measurements by gender were analyzed using the information obtained from both the computer images and the casts. One-sample, 2-sample, and paired t tests, and repeated-measures analysis of variance and Duncan multiple-range tests were performed to analyze the data (alpha=.05).

RESULTS

The dimensions of the central incisors (P<.05) and canines (P<.01) varied by gender. The existence of the so-called "golden proportion" for the maxillary anterior teeth as a whole was not found. Significant differences emerged when the mean ratios between various perceived widths were compared with their ideal golden ratios (P<.01). Proportional relationships between the bizygomatic width and the width of the central incisor, and the intercanine distance and the interalar width in women were observed.

CONCLUSION

The maxillary central incisor and canine dimensions of men were greater than those of women in the Turkish population studied, with the canines showing the greatest gender variation. Neither a golden proportion nor any other recurrent proportion for all anterior teeth was determined. Bizygomatic width and interalar width may serve as references for establishing the ideal width of the maxillary anterior teeth, particularly in women.

Patterns of size sexual dimorphism in Australopithecus afarensis: Another look

Size sexual dimorphism is one of the major components of morphological variation and has been associated with socio-ecology and behavioral variables such as mating patterns. Although several studies have addressed the magnitude and pattern of sexual dimorphism in Australopithecus afarensis, one of the earliest hominids, consensus has yet to be reached. This paper uses assigned re-sampling method, a data re-sampling method to estimate the magnitude of sexual dimorphism without relying on individual sex assessments, to examine the fossil hominid sample from Hadar. Two questions are asked: first, whether sexual dimorphism in a selected sample of skeletal elements of A. afarensis is the same as that in living humans, chimpanzees, or gorillas; and second, whether different skeletal elements reflect variation in sexual dimorphism in the same way. All possible metric variables were used as data in applying the method, including seven variables from three elements (mandibular canine, humerus, femur). Analyses show that A. afarensis is similar in size sexual dimorphism to gorillas in femoral variables, to humans in humeral variables, and to chimpanzees in canine variables. The results of this study are compatible with the hypothesis that the pattern of sexual dimorphism in A. afarensis is different from any that are observed in living humans or apes.

Variation in modern human enamel formation times

Most of what we know about the timing of human enamel formation comes from radiographic studies on children of known age. Here, we present new longitudinal data derived from a histological analysis of tooth enamel. Two samples, one from southern Africa and one from northern Europe, contained all anterior and molar tooth types. Two further samples contained only one tooth type: canines from a medieval Danish sample and third molars from a modern North American sample. Data were collected on 326 molars and 352 anterior teeth. Each tooth was sectioned and prepared for polarized light microscopy. We used daily enamel cross striations to determine cuspal enamel formation time, recorded the periodicity of long-period striae in the lateral enamel, and used this value to calculate enamel formation times for each decile of crown length. We present data that reveal some of the processes whereby differences in enamel formation times arise between our samples. Mean cuspal enamel formation times were similar in southern African and northern European anterior teeth, but differed in certain molar cusps. All the southern African anterior teeth completed enamel formation earlier. The greatest difference in mean chronological age at enamel completion was 5.2 vs. 6.2 years of age in lower canines. However, enamel completion times in the molar teeth showed few differences between the samples, with mean times for the longest forming cusps all falling between 3.0 years and 3.45 years. Our data suggest fewer differences between samples and smaller ranges of variation than in many radiographic studies and present a more realistic picture of worldwide variation in enamel formation times.

Prediction of lower permanent canine and premolars width by correlation methods

The aim of this study was to determine linear regression equations to estimate the widths of unerupted lower permanent canines and premolars using measurements obtained from 45 degrees oblique teleradiographs. The sample consisted of 30 white Caucasian patients orthodontically treated at the Faculty of Dentistry, Universidade Federal do Rio de Janeiro. The records for each patient included a 45 degrees oblique teleradiograph (left side) in the mixed dentition period and a dental cast of the permanent dentition. Pearson's test was applied between each lower canine, first and second premolars measured on the radiograph, and the sum of their actual widths measured on the dental cast. The strongest correlation occurred for the first premolars for one side (.82) and both sides (.84). One linear regression equation was determined to estimate the widths of un-erupted lower canine and premolars of both sides from a single measurement of the first premolar.

Tooth shape preferences in an esthetic smile

INTRODUCTION

The purpose of this study was to evaluate the contributions of tooth shape to the esthetic smile.

METHODS

Restorative dentists (120), laypeople (102), and orthodontists (113) evaluated a series of color photographs of men's and women's smiles. The photographs were randomly presented to test the effects of 3 different shapes of maxillary incisors and canines on the same patient.

RESULTS

For women, orthodontists preferred round and square-round incisors (P < .01), and restorative dentists preferred round incisors (P < or = .03). Laypeople did not discriminate between incisor shapes. For men, all 3 groups preferred square-round incisors (P < or = .042). There was also a tendency for male judges to rate female images more attractive than did female judges.

CONCLUSIONS

Restorative dentists, orthodontists, and laypeople share similarities and display differences when considering esthetic preferences in tooth shape. Although there was no consensus in preference among the laypeople as a group, their preferences differed from those of the dental professionals.

Ex vivo evaluation of the capacity of the Tri Auto ZX to locate the apical foramen during root canal retreatment

AIM

To evaluate ex vivo the capacity of the Tri Auto ZX to locate the apical foramen during root canal retreatment.

METHODOLOGY

The root canals of 62 maxillary and mandibular canines were prepared to a length 1 mm short of the apical foramen, to an apical size 35 using 1% sodium hypochlorite as an irrigant. Once prepared, the length of each tooth was measured directly using a size 15 K-Flexofile introduced in the canal until the tip was visible at the apical foramen. After the file was removed, its length was recorded to a precision of 0.01 mm using a calliper. These direct lengths (DL) became the 'gold standard' for comparison with the electronic lengths (EL) derived from the Tri Auto ZX. After direct measurement, the tooth was measured electronically (EL1) and the canals were filled using lateral condensation of gutta-percha cones and sealer. Seven days later the root filling was removed using solvent, Gates-Glidden burs, and K-files, and new electronic lengths determined (EL2). The electronic lengths (EL1 and EL2) were compared with the DL, and the differences were analysed statistically using the proportions test and Student's t-test.

RESULTS

At a tolerance limit of +/-0.5 mm, EL1 coincided with the DL in 76% of cases. Lengths obtained in the presence of remnant of filling material (EL2) coincided in 81% of cases. The proportions test used to compare these percentages showed no statistically significant difference between EL1 and EL2 (P > 0.05). The Student's t-test revealed a statistically significant difference (P < 0.05) between the means of the differences between DL/EL1 (-0.36 mm) and DL/EL2 (-0.04 mm).

CONCLUSION

The Tri Auto ZX was accurate to +/-0.5 mm in more than 80% of teeth following removal of root fillings.

Sexual dimorphism in modern human permanent teeth

On average, males possess larger tooth crowns than females in contemporary human populations, although the degree of dimorphism varies within different populations. In previous studies, different amounts of either enamel or dentine were implicated as the cause of this dimorphism. In this study, we attempt to determine the nature of sexual dimorphism in the crowns of permanent modern human teeth and to determine if two contrasting tooth types (permanent third molars and canines) show identical patterns of dimorphism in enamel and dentine distribution. We estimated the relative contributions of both enamel and dentine to total crown size, from buccolingual sections of teeth. Our sample consisted of a total of 144 mandibular permanent third molars and 25 permanent mandibular canines of known sex. We show that sexual dimorphism is likely due, in part, to the presence of relatively more dentine in the crowns of male teeth. However, whatever the underlying cause, dimorphism in both tooth root and tooth crown size should produce measurable dimorphism in tooth weight, though this has not been previously explored. Therefore, we provide some preliminary data that indicate the usefulness of wet tooth weight as a measure of sexual dimorphism. Both male permanent third molars and canines are significantly heavier than those of females. The weight dimorphism reported here for both classes of teeth may prove a useful finding for future forensic studies. In particular, weights of canines may be more useful as a means of sexing modern human skeletal material than linear or area measurements of teeth.

Intermaxillary tooth size discrepancy and mesiodistal crown dimensions for a Turkish population

INTRODUCTION

The aims of this study were to determine the size of individual permanent teeth, tooth-size ratios for the maxillary and mandibular dentitions, and sex differences for those variables in a Turkish population, and to compare the figures obtained with those of the Bolton analysis.

METHODS

The data were derived from dental casts of 150 Turkish subjects (72 men, mean age 22.09 +/- 3.11 years; 78 women, mean age, 21.11 +/- 2.08 years) with normal occlusions. The mean, standard deviation, and minimum and maximum values were calculated for individual tooth size, and overall and anterior ratios, separately for men and women. To determine whether there are sex differences in intermaxillary tooth size discrepancies, an independent samples t test was performed.

RESULTS

The mesiodistal dimensions of the maxillary teeth showed greater variability than the mandibular teeth, with the first molar dimensions having the greatest variability. The overall and anterior ratios were found to be 89.88 +/- 2.29 and 78.26 +/- 2.61, respectively. A statistically significant sex difference was found only in overall ratio (P < .001). According to Bolton's mean values, a discrepancy in the overall ratio was found in 18% of Turkish normal occlusion subjects, and anterior ratios outside 2 standard deviations from the Bolton mean were found in 21.3% of our sample.

CONCLUSIONS

These findings indicate that population-specific standards are necessary for clinical assessments. Bolton's original data do not represent Turkish people, and therefore it is appropriate to use Turkish norms in daily orthodontic practice for Turkish patients.

Anterior dental aesthetics: Dental perspective

The purpose of this series is to convey the principles governing our aesthetic senses. Usually meaning visual perception, aesthetics is not merely limited to the ocular apparatus. The concept of aesthetics encompasses both the time-arts such as music, theatre, literature and film, as well as space-arts such as paintings, sculpture and architecture.

The finite element method: a tool to study orthodontic tooth movement

Orthodontic tooth movement is achieved by (re)modeling processes of the alveolar bone, which are triggered by changes in the stress/strain distribution in the periodontium. In the past, the finite element (FE) method has been used to describe the stressed situation within the periodontal ligament (PDL) and surrounding alveolar bone. The present study sought to determine the impact of the modeling process on the outcome from FE analyses and to relate these findings to the current theories on orthodontic tooth movement. In a series of FE analyses simulating teeth subjected to orthodontic loading, the influence of geometry/morphology, material properties, and boundary conditions was evaluated. The accurate description of alveolar bone morphology and the assignment of non-linear mechanical properties for the PDF elements demonstrate that loading of the periodontium cannot be explained in simple terms of compression and tension along the loading direction. Tension in the alveolar bone was far more predominant than compression.

21st century endodontics. Part 2

The first paper in this series considered the subject of diagnosis and treatment planning for patients with endodontic problems. One of the factors to be taken into consideration when deciding whether or not to prescribe root canal treatment is the morphology of the root canal system of the root in question. Some information may be gleaned from the pre-operative radiograph, but much will be part of the practitioner's own knowledge. An understanding of the root canal morphology is also essential when cutting efficient and effective access cavities, remembering the endodontic cliché that 'access is success'. This paper will review canal morphology and access cavities, and then consider how teeth under treatment may be isolated from the oral environment to maintain a sterile operating environment.

Tooth-size ratio for patients requiring 4 first premolar extractions

INTRODUCTION

The relationship between total mesiodistal widths of the maxillary and mandibular teeth is an important factor in orthodontic treatment planning. The purposes of this article are to report a mathematical tooth-size ratio specifically designed for patients needing the extraction of 4 first premolars and to compare the anterior "6" and overall "12" ratio values reported by Bolton with the calculated anterior "6" and overall "10" ratio values obtained from data in this study.

METHODS

This study was conducted in 3 phases. In the first 2 phases, we used the peer assessment rating and ideal cephalometric norms to select 53 ideal posttreatment models of patients who had had 4 premolars extracted. In the third phase, the mean overall "10" ratio and the mean anterior "6" ratio were calculated for the selected models. Bolton's mean overall "12" (91.3%) and anterior "6" ratios (77.2%) were compared statistically with calculations derived from this study by using 1-sample t test.

RESULTS

The mean overall "10" ratio and the mean anterior "6" ratio were found to be 89.28 +/- 1.07% and 77.68 +/- 1.12%, respectively. Although the difference in anterior ratio was not significantly different from Bolton's anterior "6" ratio, there was a statistically significant difference between Bolton's study and our study in overall ratio.

CONCLUSIONS

The mathematical tooth size overall ratio of 89.28% was determined for patients requiring the extraction of 4 first premolars and is recommended for use in diagnosis and treatment planning.

Are the lower incisors the best predictors for the unerupted canine and premolars sums? an analysis of a Peruvian sample

The lower permanent incisor tooth width sum has been proposed as the best predictor for the tooth width sums of the unerupted canine and premolars (SPCP) for populations from different ethnic origins. Only two previous studies have refuted it. The purpose of the present study was to determine which sum or combination of sums of permanent tooth widths presented the best prediction capability for the SPCP in a Peruvian sample, to calculate a specific linear regression equation for this population, and to evaluate the clinical significance. A total of 150 children with complete permanent dentitions were selected. Fifty more children were used as a validation sample for the application of a multiple linear regression equation (MLRE). They did not present clinically visible dental caries or proximal restorations and no active or previous orthodontic treatment. Their dental casts were measured to 0.1 mm with a sliding caliper with a Vernier scale. Three-way analysis of variance, Pearson Correlation Test, Fisher Z values and a MLRE were used for the statistical analysis. The combination of the sums of permanent upper and lower central incisors and upper first molars was the best predictor for the SPCP in this sample. A MLRE was calculated including sex and arch as additional predictor variables. The MLRE determination coefficient was 60% with a standard error of 0.8 mm. This new MLRE underestimates (less than 1 mm discrepancy) the actual SPCP in only 7% of the cases on the basis of a validation sample.

Anterior tooth morphology and its effect on torque

This study was undertaken to determine the variation in crown-root angle (CRA) of the upper incisors and canines as well as the variation in their labial contour. In addition, the influence of the variability of the labial contour and of different bracket heights on torque was evaluated. Proximal radiographs were taken of 160 extracted maxillary teeth (81 incisors and 79 canines). They were digitized and analysed with Jasc Paint Shop Pro 7TM and Mathcad 2001 Professional. The incisal edge, the centre of the cemento-enamel junction (CEJ), and the root apex were digitized to define the crown and root long axis. For all teeth the CRA was measured. At several heights of the labial surface a tangent was determined, enabling measurement of the inclination of the labial surface. The CRA had great variability, ranging from 167 to 195 degrees for the canines (mean value 183 degrees) and from 171 to 195 degrees for the incisors (average 184 degrees). The mean inclinations of the labial surfaces for the incisors varied greatly. Between 4 and 4.5 mm from the incisal edge the standard deviations (SD) were the smallest and between 2 and 4.5 mm from the incisal edge the labial surface angle differed by approximately 10 degrees. For the canines the mean inclinations of the buccal surface also varied. This angle differed by around 10 degrees between 2 and 4.5 mm from the incisal edge, but the SD were much larger than for the incisors. It can be concluded that placement of a bracket on a tooth at varying heights, still within a clinically acceptable range, results in important differences in the amount of root torque.

Wide faces or large canines? The attractive versus the aggressive primate

Hominids display marked body size dimorphism, suggestive of strong sexual selection, yet they lack significant sex differences in canine size that are commonly associated with intrasexual competition in primates. We resolve this paradox by examining sex differences in hominoid facial morphology. We show that chimpanzees, but not gorillas, exhibit clear sexual dimorphism in face width, over and above that expected based on sex differences in body size. We show that this facial dimorphism, expressed as an index, is negatively correlated with canine dimorphism among anthropoid primates. Our findings suggest that a lack of canine dimorphism in anthropoids is not owing to weak sexual selection, but rather is associated with strong sexual selection for broader face width. Enlarged cheek-bones are linked with attractiveness in humans, and we propose that the evolution of a broad face and loss of large canines in hominid males results from mate choice.

Root Curvature: Differences Among Dental Morphotypes and Modifications After Mechanical Instrumentation

BACKGROUND

This study was designed to describe a method for measuring root curvature of extracted teeth, compare root curvature of four different dental morphotypes before mechanical instrumentation, and measure root curvature after mechanical instrumentation.

METHODS

Fifty-five maxillary (14 central incisors, 13 lateral incisors, 14 cuspids, 14 premolars) extracted teeth were analyzed. Measurements were recorded on the horizontal plane at the most apical point of the cemento-enamel junction (CEJ). A 4 mm wide root portion on the buccal aspect was selected and recorded on this plane. A digital scanner traced the circle coinciding with the profile of this root portion and calculated its radius, arc, chord, and arrow (i.e., the perpendicular bisector of the chord). Since root curvature is the inverse of the radius (1/r), the radius was related to root curvature; the arc to the mesio-distal dimension of the root portion; and the reduction of the arrow to root flattening after mechanical instrumentation. The measurements were recorded four times: before treatment (baseline), after polishing, after a first root planing, and after a second root planing. The radii of each dental morphotype (upper central incisors, upper lateral incisors, upper canines, upper premolars) recorded in the first measurement were calculated and used for the statistical analyses: one-way analysis of variance (ANOVA) test and the Tukey multiple comparison method were used to study the curvature. The measurements of the radius, the arc, and the arrow at the four times were used for the statistical analyses: the two-way ANOVA test and the Tukey multiple comparison method were applied in the study of the root modifications after mechanical instrumentation. The accuracy and reliability of the method were also evaluated.

RESULTS

The mean radii of the four dental morphotypes were: central incisors: 3.613 +/- 0.258 mm; lateral incisors: 2.558 +/- 0.256 mm; canines: 2.822 +/- 0.238 mm; and premolars: 2.321 +/- 0.179 mm. The statistical analyses revealed differences among central incisors, canines, lateral incisors, and premolars. There was no statistically significant difference between lateral incisors and premolars. Regarding the root modifications after mechanical treatment, the radius did not show statistically significant differences in any of the comparisons. The arc and the arrow did not show significant differences between baseline and polishing, while they did show significant differences after the second root planing.

CONCLUSIONS

This study indicates that: 1) the method of measuring is accurate and reliable; 2) there are statistically significant differences among the root curvatures of different dental morphotypes; and 3) polishing did not modify the root. A vigorous root planing did not modify root curvature, but it did reduce the mesio-distal dimension and flatten the root surface slightly.

Relation in color among maxillary incisors and canines

OBJECTIVES

To establish the strength of color relation among the maxillary central incisor, lateral incisor and canine teeth by using digital photography. This relation might be useful for the color reconstruction of the missing part of a tooth from the color obtained from neighboring teeth.

METHODS

The L*a*b* values of the maxillary incisors and canines were determined in 100 subjects. Paired t-tests, Pearson correlations and linear regression analyses were used to describe the relation of the L*a*b* values between the three teeth for each segment (cervical, middle and incisal).

RESULTS

The mean L*a*b* values of the canines differed statistically significantly from the values of the central incisors (p<0.001) except for L* and a* values in the cervical segment between the lateral incisor and canine. The color differences between the incisors were statistically significant in fewer cases. The relation in color was the highest between the cervical segments of the three teeth, with respect to L* (r = 0.45-0.65; p < 0.001), b* (r = 0.49-0.55; p < 0.001), and a* (r = 0.38-0.61; p < 0.001), and no relation was found between the incisal segments of central incisor and canine.

SIGNIFICANCE

There is a relation in color between the maxillary incisors and canines, which is stronger between the cervical than between the middle and incisal segments. Therefore, the color prediction is most reliable when the cervical parts of the teeth are used.

Comparative assesment of gingival thickness using transgingival probing and ultrasonographic method

A decided attitude of expectation among many patients has given a new perspective to regenerative and plastic periodonta surgery. With authors emphasizing on the importance of gingival thickness, attempts are being made to obtain necessary information atraumatically and rapidly. Hence in the present study an attempt has been made to compare the two methods of assessing gingival thickness i.e transgingival probing and ultrasonographic method and also assess the gingival thickness in relation to central incisor lateral incisor and canine in Indian population. The gingival thickness was assessed in patients with healthy gingiva by both the methods. It was observed that transgingival probing method significantly over estimated the thickness of gingiva than the ultrasonographic method and the thickness of gingiva varies with morphology of the crown. It was concluded that compared to transgingival probing ultrasonographic method assesses gingiva thickness more accurately, rapidly and atraumatically.

Developmental processes and canine dimorphism in primate evolution

Understanding the evolutionary history of canine sexual dimorphism is important for interpreting the developmental biology, socioecology and phylogenetic position of primates. All current evidence for extant primates indicates that canine dimorphism is achieved through bimaturism rather than via differences in rates of crown formation time. Using incremental growth lines, we charted the ontogeny of canine formation within species of Eocene Cantius, the earliest known canine-dimorphic primate, to test whether canine dimorphism via bimaturism was developmentally canalized early in primate evolution. Our results show that canine dimorphism in Cantius is achieved primarily through different rates of crown formation in males and females, not bimaturism. This is the first demonstration of rate differences resulting in canine dimorphism in any primate and therefore suggests that canine dimorphism is not developmentally homologous across Primates. The most likely interpretation is that canine dimorphism has been selected for at least twice during the course of primate evolution. The power of this approach is its ability to identify underlying developmental processes behind patterns of morphological similarity, even in long-extinct primate species.

Cementum onSmilodon sabers

The maxillary canines of Smilodon californicus Bovard, 1907 have a deeply curved cementoenamel junction. The gingiva of modern cats is attached to the tooth at the cementoenamel junction and provides tactile and other dental information to the animal. The presence of cementum at the cervix of the maxillary canines, also called sabers, would indicate that the gingiva in Smilodon was attached in this region. Such an attachment would be advantageous, providing stability and sensory input for the large tooth. Also, gingiva at the cervix would impact the manner in which the teeth were used. Previous study using scanning electron microscopy of dental casts was indirect. The purpose of this study was to confirm by direct methods the presence of cementum at the cervix of Smilodon californicus sabers. Parts of three Smilodon californicus sabers were sectioned and examined with light and scanning electron microscopy (EDS). In addition, percent weight of calcium and phosphorus was measured in enamel, dentin, and cementum using electron dispersive spectroscopy. Cementum was identified in the cervical region of each saber. Spectroscopy confirmed that the tissue is calcified and the mineral is hydroxyapatite. Percent calcium and percent phosphorus of individual tissues were highly variable between specimens. However, the ratios of calcium to phosphorus were not significantly different from the hydroxyapatite standard. In the future, bite models will have to take the presence of soft tissues into account.

Ontogenetic bases of canine dimorphism in anthropoid primates

This study tests hypotheses regarding the ontogeny of canine tooth size dimorphism in five anthropoid primate species (Saguinus fuscicollis, Macaca mulatta, Cercocebus atys, Papio hamadryas, and Mandrillus sphinx). Canine measurements and chronological age data are analyzed to determine if bimaturism, a sex difference in the age at which eruption ceases, accounts for canine tooth sexual dimorphism. Canine height measurements are evaluated through a variety of regression techniques. Results show a lack of sexual dimorphism in Saguinus. While size dimorphism is absent in the deciduous teeth of all species analyzed, the adult teeth in cercopithecines become increasingly dimorphic through ontogeny. Female adult tooth eruption regularly precedes male tooth eruption, and regression-based eruption trajectories for both sexes intersect at about the age at which the female tooth reaches adult size. Males erupt the tooth later and more rapidly than females. Males also reach a larger adult size than females by erupting the tooth for much longer periods of time. Bimaturism is primary in the production of dimorphism, but rates of eruption show modest variation. These results point to the scheduling of sexual selection through intermale competition as a primary factor determining male eruption timing, rates of eruption, and adult size. Life history factors may play a role in determining the relations between the scheduling of intrasexual competition and canine eruption. Female contributions to sexual dimorphism are apparent in these species, suggesting that similar levels of dimorphism can be attained through diverse ontogenetic pathways.

Changes in dental arch measurements of young adults with normal occlusion--a longitudinal study

This study evaluates the longitudinal changes in occlusal dimensions in young adults. The sample was composed of 27 individuals (13 male and 14 female individuals) who presented dental Class I and normal occlusion, according to the inclusion protocol. All teeth were present except for the third molars. The mean age of the subjects was 21 years and two months initially and 28 years and four months at the end of the observation period. The measurements collected in both arches were overbite, overjet, intercanine and intermolar distances, irregularity index, and perimeter. All measurements were taken from study dental casts by a calibrated operator, using a digital caliper. The paired t-test was used to evaluate the changes, using the difference between the initial and final mean measurements. Data indicated that the overbite increased 0.39 mm, the incisor irregularity increased 0.38 mm in the upper arch and 0.54 mm in the lower arch, and the arch perimeter decreased 0.67 mm in the upper arch and 0.71 mm in the lower arch (P > .05). The other measurements did not show significant changes. No sexual dimorphism was observed. It could be concluded that occlusal dimensions change throughout adult life. In the sample studied, changes were statistically significant for overbite, incisors irregularity, and arch perimeter after a mean period of seven years and two months. These changes can be observed in both sexes.

Mixed dentition analysis in a Moroccan population

The aims of this study were to produce odontometric data for a Moroccan population, to test Tanaka and Johnston and Moyers methods, to derive regression equations and elaborate a specific orthodontic prediction table for Moroccan children. 50 dental casts of Moroccan students (25 males, 25 females, mean age 22.6 years sd 1.35) were used to perform measurements of the greatest mesiodistal widths of all mandibular and maxillary canines and premolars and mandibular incisors with an orthodontic calliper. Significant sexual dimorphism was found in tooth sizes (p = .001). The study revealed close relationships between the total mesiodistal widths of the mandibular permanent incisors and that of the maxillary and mandibular canines and premolars. The correlation coefficients (r) and the coefficient of determination (R2) were better sexes combined for the maxilla (r = 0.60 ; R2 = 0.36 ) and for the mandible (r = 0.61 ; R2= 0.37). The regression equations elaborated for males and females were used as a basis for establishing an orthodontic prediction table for Moroccan children.

Comparing orthodontic treatment outcome between orthodontists and general dentists with the ABO index

This study used the American Board of Orthodontics (ABO) Objective Grading System (ABO index) (ABOI) to compare treatment outcome between patients treated by orthodontic specialists (OS) and patients treated by general dentists (GP). The sample (n = 196) consisted of 126 dental casts of patients treated by OS and 70 treated by GPs. All casts were collected in 1997 and 1998 from 10th grade students attending high schools in Cuyahoga County, Ohio, and were scored by 1 operator (Y.A.) calibrated in the use of the ABOI. The mean ABOI score for the OS group was 26.0 +/- 11.4 compared with 29.6 +/- 12.8 for the GP group. This difference was significant at the P < or = .05 level. Of the 7 components used in the ABOI, alignment of teeth was found to be the most significant between groups (OS mean = 5.39 +/- 4.37 versus GP mean = 7.8 +/- 5.21, P < or = .0007). In this sample, a significantly lower ABOI score was found for patients treated by OS compared with patients treated by GP.

Cope's Rule, Hypercarnivory, and Extinction in North American Canids

Over the past 50 million years, successive clades of large carnivorous mammals diversified and then declined to extinction. In most instances, the cause of the decline remains a puzzle. Here we argue that energetic constraints and pervasive selection for larger size (Cope's rule) in carnivores lead to dietary specialization (hypercarnivory) and increased vulnerability to extinction. In two major clades of extinct North American canids, the evolution of large size was associated with a dietary shift to hypercarnivory and a decline in species durations. Thus, selection for attributes that promoted individual success resulted in progressive evolutionary failure of their clades.

Using the golden proportion in aesthetic treatment: a case report

Many dental patients are unhappy with their smile but believe a beautiful smile is outside their budget. The first step is to listen to the patient in order to understand what his or her primary concerns are. The second step is to examine carefully and analyze the case to develop a treatment plan that will fulfill as much as possible of the patient's desires within the context of his or her constraints (financial or otherwise). Also, remember that dentistry doesn't end when the last veneer is placed or the last bill is paid. The final step is to maintain a strong relationship with your patients to ensure good oral hygiene and restorations that are as long-lasting as they are beautiful.

Evaluation of the root canal configurations of the mandibular and maxillary permanent teeth by gender in the Turkish population

A key objective of successful nonsurgical endodontic treatment is obturation of the root canal systems. One factor in achieving this goal is the knowledge of possible root canal morphologies. Root canal morphology may exhibit variation as a result of many factors, including ethnic origin. In this study, 1400 male and 1400 female extracted mandibular and maxillary permanent teeth were evaluated for patterns in root canal morphology. The mandibular and maxillary teeth were divided into seven groups of tooth type (e.g. centrals, laterals, canines, first premolars, second premolars, first molars, and second molars), subdivided into gender, and classified by root canal morphologies. Vertucci's classification was taken as a reference during the evaluation. Although a majority of the specimens corresponded to this classification scheme, the analysis of this large data set revealed 14 additional root canal morphologies.

Appraising number and clinical significance of regression equations to predict unerupted canines and premolars

A sound statistical or clinical reason for proposing several single linear regression equations (SLRE) for predicting unerupted canine and premolar tooth-width sums is needed. The purpose of this study was to develop a methodology to evaluate the number and the clinical significance of SLRE required. A 6-step methodology is presented that permits evaluating the number and the clinical significance of SLRE required for predicting unerupted canine and premolar tooth-width sums. It is important not only to evaluate the statistical need for specific SLRE in different populations, but also to state the clinical significance of their differences against commonly used SLRE.

Later Middle Pleistocene human remains from the Almonda Karstic system, Torres Novas, Portugal

Later Middle Pleistocene archeological deposits of the Galeria Pesada (Gruta da Aroeira), Almonda Karstic System, Torres Novas, Portugal, yielded two archaic human teeth, a mandibular canine and a maxillary third molar. The C(1)presents moderate and asymmetrical shoveling with a stout root. The slightly worn M(3)exhibits at least four cusps with a large hypocone, three roots with large radicular plates, and an absence of taurodontism. They are moderately large for later Middle Pleistocene humans in their buccolingual crown diameters, although the M(3)mesiodistal diameter is modest. The C(1)exhibits labial calculus and multiple linear hypoplastic defects, but the M(3)is lesion free. Both teeth are morphologically similar to those of other Middle Pleistocene European humans and reinforce a pattern of dental hypertrophy among these archaic Homo.

Intraosseous course of the inferior alveolar (dental) nerve and its relative position in the mandible

The present study was planned to evaluate the position of the mandibular foramen (MF) and the course of the inferior alveolar nerve in 12 right and 14 left cadaveric hemimandibles. The soft tissue including the muscle attachments of the mandible was cleaned and the inferior neurovascular bundle was dissected up to the MF. The distances from the MF to the angle, symphysis menti, 3rd molar, and the lower point of the mandibular notch were measured. The bone was chiseled from its lingual surface to expose the mandibular canal. The distances from the nerve to the alveolar and inferior borders were measured. The distance from the MF to different landmarks did not show any side differences except the one to the symphysis menti (P<0.05; Mann-Whitney 'U' test). Similarly the distances from the nerve to the borders also did not show any significant side differences. These data indicate that, on average, MF is located at a symmetrical point on the ramus on either side, although, not exactly at a fixed distance from any landmarks tested. Further, the canals were located either at near to the middle or below near to the base of the mandible. This study concludes that, the location of the MF varies from bone to bone despite its bilateral symmetry. Further, the canal and consequently the nerve do not maintain a constant position in the mandible.

Surprisingly rapid growth in Neanderthals

Life-history traits correlate closely with dental growth, so differences in dental growth within Homo can enable us to determine how somatic development has evolved and to identify developmental shifts that warrant species-level distinctions. Dental growth can be determined from the speed of enamel formation (or extension rate). We analysed the enamel extension rate in Homo antecessor (8 teeth analysed), Homo heidelbergensis (106), Homo neanderthalensis ('Neanderthals'; 146) and Upper Palaeolithic-Mesolithic Homo sapiens (100). Here we report that Upper Palaeolithic-Mesolithic H. sapiens shared an identical dental development pattern with modern humans, but that H. antecessor and H. heidelbergensis had shorter periods of dental growth. Surprisingly, Neanderthals were characterized by having the shortest period of dental growth. Because dental growth is an excellent indicator of somatic development, our results suggest that Neanderthals developed faster even than their immediate ancestor, H. heidelbergensis. Dental growth became longer and brain size increased from the Plio-Pleistocene in hominid evolution. Neanderthals, despite having a large brain, were characterized by a short period of development. This autapomorphy in growth is an evolutionary reversal, and points strongly to a specific distinction between H. sapiens and H. neanderthalensis.

An evaluation of dynamic lip-tooth characteristics during speech and smile in adolescents

This retrospective study was conducted to measure lip-tooth characteristics of adolescents. Pretreatment video clips of 1242 consecutive patients were screened for Class-I skeletal and dental patterns. After all inclusion criteria were applied, the final sample consisted of 50 patients (27 boys, 23 girls) with a mean age of 12.5 years. The raw digital video stream of each patient was edited to select a single image frame representing the patient saying the syllable "chee" and a second single image representing the patient's posed social smile and saved as part of a 12-frame image sequence. Each animation image was analyzed using a SmileMesh computer application to measure the smile index (the ratio of the intercommissure width divided by the interlabial gap), intercommissure width (mm), interlabial gap (mm), percent incisor below the intercommissure line, and maximum incisor exposure (mm). The data were analyzed using SAS (version 8.1). All recorded differences in linear measures had to be > or = 2 mm. The results suggest that anterior tooth display at speech and smile should be recorded independently but evaluated as part of a dynamic range. Asking patients to say "cheese" and then smile is no longer a valid method to elicit the parameters of anterior tooth display. When planning the vertical positions of incisors during orthodontic treatment, the orthodontist should view the dynamics of anterior tooth display as a continuum delineated by the time points of rest, speech, posed social smile, and a Duchenne smile.

Late Miocene teeth from Middle Awash, Ethiopia, and early hominid dental evolution

Late Miocene fossil hominid teeth recovered from Ethiopia's Middle Awash are assigned to Ardipithecus kadabba. Their primitive morphology and wear pattern demonstrate that A. kadabba is distinct from Ardipithecus ramidus. These fossils suggest that the last common ancestor of apes and humans had a functionally honing canine-third premolar complex. Comparison with teeth of Sahelanthropus and Orrorin, the two other named late Miocene hominid genera, implies that these putative taxa are very similar to A. kadabba. It is therefore premature to posit extensive late Miocene hominid diversity on the basis of currently available samples.

The nano-hardness and elastic modulus of carious and sound primary canine dentin

This study measured the nanohardness and elastic modulus- of carious and sound primary canine dentin and compared the values obtained under the lesion and in sound regions of incisal, center and cervical areas, and outer, middle and inner layers. Six extracted or exfoliated primary canines (three with dentin caries on both proximal surfaces and three sound teeth) were mesiodistally sectioned parallel to the long axis of the tooth and polished. The hardness (H), plastic hardness (PH) and Young's modulus (Y) were measured by a nano-indentation tester. Ten indentations at intervals of 10 microm on all regions, areas and layers were made using a load of 1 gf for one second. All indentations were observed using a microscope attached to the tester. All data were statistically analyzed using ANOVA and Scheffe's test at p < 0.05. For sound teeth, the H, PH and Y values of the inner layer were significantly lower than the outer and middle layers in all areas. The H, PH and Y values of the cervical area were significantly lower than the incisal area in almost all of the outer, middle and inner layers. For carious teeth, the H, PH and Y values of the inner layer were significantly lower than the outer and middle layers in the center area. For the center area, the H, PH and Y values under the lesion were significantly lower than sound teeth in the outer and middle layers. Dentin under the lesion, near the pulp and cervical areas showed significantly lower nanohardness and elasticity.

Variations in pulp/tooth area ratio as an indicator of age: a preliminary study

This paper details a method for age determination of adults from single rooted teeth. The sample consisted of 100 Italian white Caucasian patients (46 men, 54 women) aged between 18 and 72 years. The single rooted maxillary right canine was utilized in this preliminary study. Pulp/root ration, tooth length, pulp/tooth length ratio, pulp/tooth area and pulp/root width ratios at three different levels were computed. Pearson's correlation coefficients between age and these variables showed that the ratio between pulp and tooth area correlated best with age (r2 = 0.85). Stepwise multiple regression models yielded a linear relationship between pulp/root width at mid-root level and chronological age and a linear relationship when pulp/tooth area was compared to age. Statistical analysis indicated that these two variables explain 84.9% of variations in estimated chronological age. The median of the absolute value of residual errors between actual and estimated ages was less than four years.

The visible portion of anterior teeth at rest

The visibility of anterior tooth surfaces with lips at rest or during function is an important factor in determining prosthodontic outcome. There is a lack of sufficient information published on this subject. The aim of this study was to investigate the degree of visibility of maxillary and mandibular anterior teeth surfaces when the lips are at rest. Four hundred seventy three adults were examined. All the subjects had maxillary and mandibular anterior teeth present with no caries, restorations, severe attrition, mobility, extrusion, or obvious deformities. The portions of anterior teeth that were visible were measured vertically using a Boley gauge from the border of the lip to the incisal edge for the incisors and to the cusp tip for the canines. The measurement was taken at the midpoint of the tooth when the lips and lower jaw were at the rest position. The length of the upper lip was measured from the base of the columella to the tip of the philtrum at the midline of the face. Males showed more of the maxillary lateral, canine, and mandibular anterior teeth than females. With increasing age, the amount of maxillary anterior teeth that was visible at rest decreased. The subjects with shorter upper lips displayed more maxillary central incisor structure than those with longer upper lips. Racial differences were not found. The amount of visible portions of anterior teeth is determined by muscle positions that vary from person to another. It provides an excellent starting point for vertical positioning anterior teeth that can be modified as necessary in any clinical situation. The findings of this study should help the dentist in providing aesthetic prosthodontic treatment that involves replacement of anterior teeth. A useful guideline for positioning anterior teeth is suggested.

Modeling and characterization of the CEJ for optimization of esthetic implant design

This study evaluated the dimensions and characteristics of the cementoenamel junction (CEJ) of maxillary anterior teeth; the natural CEJ was compared to current implant design and used for design optimization. Standardized digital images of 137 extracted human teeth (45 central incisors, 46 lateral incisors, and 46 canines) were used to measure cervical dimensions, CEJ curvature, and distance from zenith of CEJ to interdental contact on proximal views. The x- and y-coordinates of the CEJ contour were digitized before mathematic processing to allow the representation of a single average curve for buccal, palatal, mesial, and distal surfaces for each tooth type. These measurements were combined to existing data related to dentogingival and "implantomucosal" junction to extrapolate specific biologic landmarks around teeth and implants. Mean cervical dimensions, distance from zenith of CEJ to interdental contact, and CEJ curvature were compared. Cervical dimensions significantly differed, with a more symmetric cervical cross-section for central incisors, slightly more rectangular shape for lateral incisors, and distinctly rectangular shape for canines. CEJ curvature was statistically different between all tooth groups (centrals > laterals > canines); within groups, curvature value was always superior at the mesial aspect compared to distally (3.46 mm vs 3.13 mm for centrals, 2.97 mm vs 2.38 mm for laterals, and 2.55 mm vs 1.60 mm for canines). Tooth-implant biologic width discrepancies ranged from 4.10 to 5.96 mm and were different between all groups of teeth (centrals > laterals > canines); within groups, the discrepancy was always superior at the mesial aspect compared to distally. Current implant design featuring a flat, rotation-symmetric shoulder should be reconsidered in view of natural CEJ contour to improve biologic considerations and related esthetics.

Occlusal contact area of mandibular teeth during lateral excursion

PURPOSE

This study observed occlusal contacts and determined their areas on the mandibular teeth, especially the molars, during voluntary lateral excursions.

MATERIALS AND METHODS

Occlusal contact areas were estimated with a measurement system combining 3-D tracking of mandibular movements with 3-D digitization of tooth shape. Sixteen women with sound permanent dentitions participated.

RESULTS

At the intercuspal position, estimated occlusal contact areas of the first and second mandibular molars were on average 12.6 mm2 and 9.0 mm2, respectively. However, after 3.0 mm of lateral excursion, their areas were sharply reduced to 2.2 mm2 and 1.5 mm2 on the working side, and 0.4 mm2 and 1.1 mm2 on the nonworking side, respectively.

CONCLUSION

These results suggest that the occlusal contact areas on working- and nonworking-side molars differ from each other as lateral excursion proceeds.

Clinical response of three whitening products having different peroxide delivery: comparison of tray, paint-on gel, and dentifrice

OBJECTIVE

Comparative clinical research was conducted to evaluate the efficacy and safety of three peroxide-containing tooth whitening products having different peroxide delivery.

METHODOLOGY

A total of 43 healthy adults who met entrance criteria were randomly assigned to either a dual-phase, anticavity, 1% hydrogen peroxide dentifrice with a manganese gluconate activator, an 18% carbamide peroxide paint-on gel, or a 5% carbamide peroxide professional custom tray system. Following manufacturer's instructions, the activated dentifrice was used at least twice daily for two minutes, while the paint-on gel was applied twice daily. The custom tray, a barrier system and the experimental control for this study, was worn continuously for six to eight hours daily. Tooth color (L*a*b*) was measured on the maxillary anterior teeth from standard digital images, while safety was assessed from examination and subject report.

RESULTS

At Day 15, the custom tray group had a significant (p < 0.002) reduction in yellowness and increased lightness, with adjusted mean (SE) deltab* of -1.83 (0.210) and deltaL* of 1.45 (0.292). The custom tray group experienced on average greater color improvement compared to either the paint-on gel or activated peroxide whitening dentifrice, differing significantly (p < 0.01) from either of the barrier-free systems with respect to deltab*, deltaL*, deltaE*, and deltaW*. In comparison, 14-days' use of the paint-on gel and activated dentifrice did not result in significant (p > 0.10) color improvements from baseline for deltab*, deltaL*, or deltaW*, with these two barrier-free systems not differing significantly (p > 0.26) with respect to any individual or composite color parameters. Tooth sensitivity and oral irritation were the most common safety findings in the tray and dentifrice groups (there were no adverse events in the paint-on group), and no subject discontinued treatment early because of a treatment-related adverse event.

CONCLUSION

In head-to-head 14-day testing, a low concentration (5% carbamide peroxide) barrier-based tray system yielded superior tooth color improvement compared to two barrier-free delivery systems-an 18% carbamide peroxide paint-on gel and a 1% hydrogen peroxide dentifrice with a metal activator.

Prediction of the size of un-erupted permanent cuspids and bicuspids in a Saudi sample: a pilot study

The purpose of this study was to produce an estimated equation for the prediction of unerupted cuspids and bicuspids for the Saudi population. In this study, dental casts of 65 Saudi subjects (37 males and 28 females) were used. The subjects' age ranged from 18 to 25 years. The mesiodistal width of all permanent teeth was measured. The data was subjected to regression analysis. Results showed the Tanaka and Johnston equations overestimate the predicted tooth width of the un-erupted cuspids and bicuspids in Saudis. Results showed the predicted tooth width of Saudis (males and females) is closer to the 50% level of confidence in Moyer's chart. Multiple regression equations were estimated including the sex factor. Accordingly, two equations were estimated for the prediction of the tooth width of the un-erupted cuspids and bicuspids for the Saudi males and females. Based on the results, it can be concluded the 50% data is more accurate than the commonly used percentage Moyer's table (75%) when both sexes are combined. Further studies are needed to confirm the findings of this study.

Distribution of different types of occlusal contacts at maximal intercuspal position in deciduous dentition

Since there is a lack of standardization of occlusal contacts for deciduous dentition, this study assessed distribution and different types of occlusal contacts at maximal intercuspal position in children from 4 to 5 1/2 years, with normal occlusion, finding a pattern able to be used as a reference for dentists during the rehabilitation of these children, and suitable for development of the craniofacial complex.

Comparing permanent tooth sizes (mesio-distal) of males and females in a Nigerian population

Two hundred and fifty school children in Ibadan metropolis, comprising of 125 male and 125 females were chosen by modified random sampling to study their tooth sizes (mesiodistal width) and to establish if there is any appreciable sex-difference in their permanent tooth sizes. The teeth measured were selected based on certain criteria. The mesio-distal width of a tooth was recorded as the maximum distance between the tooth sides (proximal) of a tooth on a line parallel to the occlusal and buccal surfaces. The result showed that the male teeth were consistently larger than the female teeth. The summed total maxillary and mandibular arch width of the males were 3.31 mm and 1.37 mm greater than those of the females respectively. The differences in tooth size between males and females have been established.

[Phylogeny, form and function of canine teeth in the horse]

The canine teeth of the horse developed phylogenically from the simple, pointed, short-rooted tooth form of the leaf eating, in pairs living, Eocene horse Hyracotherium and served up to the Oligocene as a means of defense (self preservation). In the Miocene the living conditions of the Merychippus changed and they took to eating grass and adopted as a new behavior the life in a herd. The canine teeth possibly played an important role in fights for social ranking; they changed from a crown form to knife-like shape. In the Pliohippus the canine tooth usually remained in male horses and since the Pliocene, it contributed to the fights between stallions, to ensure that the offspring only came from the strongest animals (preservation of the species). Form and construction of the canine tooth are described and discussed in detail under the above mentioned phylogenic and ethologic aspects.

Prediction of mesiodistal canine and premolar tooth width in a sample of Peruvian adolescents

OBJECTIVES

To compare the predicted tooth width measurements of permanent canine and premolars from Tanaka-Johnston regression equations and Moyers probability tables with the in situ measurements in a sample of Peruvian adolescents.

DESIGN

Cross-sectional.

SETTING AND SAMPLE POPULATION

Trujillo, Peru; 248 dental casts were measured using a sliding caliper with a Vernier scale rounded to 0.1 mm.

RESULTS

Tanaka-Johnston regression equations were not precise, except for the upper arch in the male sample. For females, the Moyers 95th percentile in the upper arch and the 65th percentile in the lower arch predicted the sum precisely. For males, the Moyers 65th percentile for the lower arch predicted the sum precisely, but none of the Moyers percentiles provided precise prediction in the upper arch.

CONCLUSIONS

Using tooth width prediction methods from a different racial origin could create an under- or overestimation of the actual combined canine and premolar tooth width, although their clinical significance is disputable.

Predicting mouth width from inter-canine width--a 75% rule

It has been suggested that inter-canine width plus 57% of the cumulative distance between the lateral aspect of the canines and the pupil centers can be used to estimate mouth width. Evidence also suggests that the distance between the medial irises approximates actual mouth width fairly well. However, these soft tissue prediction guidelines are limited because they rely on accurate medio-lateral positioning of the pupils within the orbits, for which no systematic empirical evidence appears to exist at this stage. It would, therefore, be more appropriate to use only known hard tissue landmarks in mouth width prediction. This study reports the results of using inter-canine width as a percentage of mouth width for its prediction. This method seems favorable in comparison to the other guidelines because it is as accurate, uses known hard tissue landmarks, and does not rely on assumptions concerning pupil location. Estimating mouth width by using the canines alone, therefore, seems the best guideline to use in facial approximation techniques, at least given knowledge existing at this stage.

Occlusion and tooth/arch dimensions in the primary dentition of preschool Jordanian children

OBJECTIVES

To assess tooth and arch dimensions, occlusal relationships and the presence of spacing or crowding in primary dentition of Jordanian children.

STUDY DESIGN

A list of 10 kindergartens was randomly selected in the governate of Irbid, Jordan. A total of 1048 children (2.5-6 years old) with complete primary dentitions were examined for occlusal relationships in three planes, and the presence of spacing or crowding. Of those, study casts were taken for 87 randomly selected 4-5-year-old children (39 girls, 48 boys). Measurements of tooth and arch dimensions were made using electronic digital sliding callipers.

RESULTS

In general, males had larger mesiodistal tooth width and larger arch dimensions. Bilateral mesial step molar relationship was found in 47.7% of children followed by bilateral flush terminal molar relationship in 37% and bilateral distal step in 3.7%. Asymmetric right/left molar relationship was found in 11.6% of children examined. Class I canine relationship was found in 57% of children, followed by Class II canines in 29% and Class III canines in 3.7%. Fifty per cent of children examined had Class I incisors, 24.7% had Class II Division 1, 13.5% had Class II Division 2 and 11.8% showed reversed overjet. Ideal overbite was seen in 44.3% of children, reduced overbite in 21.8%, increased overbite in 28.2% and 5.7% had anterior openbite. Buccal crossbite was seen in 7% of the sample. Generalized spacing was found in 61.8% and 61.1% of children in the upper and lower arches, respectively. Anthropoid spaces were found in 70% of the upper arches and in 51% of the lower arches.

CONCLUSIONS

Males had larger tooth/arch dimension than that of females in the primary dentition stage. Mesial step molar relationship was found in 47.7% of the subjects followed by flush terminal molar relationship in 37%. The majority of children examined had spaced primary dentition.

Regression equations for determining mesiodistal crown diameters of canines and premolars

In this study, regression equations (prediction equations) were established for the purpose of accurately predicting the widths of the crowns of unerupted canines (C) and premolars (P1 and P2) on the basis of the measured mesiodistal diameter (MDD) and vestibulooral diameter (VOD) of the crowns of the erupted central and lateral incisors (I1, I2) and first permanent molars (M1). On the plaster casts of 120 subjects (60 boys and 60 girls), MDD and VOD of the crowns of I1, I2, C, both P1 and P2, and M1 on both sides in both jaws were measured twice, with a time distance between measurements. Gradual regression equations were derived on the basis of the measurement results, by which the sums of the widths of crowns of C, P1, and P2 can be predicted using three to five predictors. The coefficients of multiple correlations regarding the sex and the jaw varied from 0.79 to 0.85.