Molecular mechanisms by which human immunodeficiency virus type 1 integrase stimulates the early steps of reverse transcription

Reverse transcriptase (RT) and integrase (IN) are two essential enzymes that play a critical role in synthesis and integration of the retroviral cDNA, respectively. For human immunodeficiency virus type 1 (HIV-1), RT and IN physically interact and certain mutations and deletions of IN result in viruses defective in early steps of reverse transcription. However, the mechanism by which IN affects reverse transcription is not understood. We used a cell-free reverse transcription assay with different primers and compositions of deoxynucleoside triphosphates to differentially monitor the effect of IN on the initiation and elongation modes of reverse transcription. During the initiation mode, addition of IN stimulated RT-catalyzed reverse transcription by fourfold. The stimulation was specific to IN and could not be detected when the full-length IN was replaced with truncated IN derivatives. The IN-stimulated initiation was also restricted to the template-primer complex formed using tRNA(3)(Lys) or short RNA oligonucleotides as the primer and not those formed using DNA oligonucleotides as the primer. Addition of IN also produced a threefold stimulation during the elongation mode, which was not primer dependent. The stimulation of both initiation and elongation by IN was retained in the presence of an RT trap. Furthermore, IN had no effect on steps at or before template-primer annealing, including packaging of viral genomic RNA and tRNA(3)(Lys). Taken together, our results showed that IN acts at early steps of reverse transcription by increasing the processivity of RT and suppressing the formation of the pause products.

Efficient and specific internal cleavage of a retroviral palindromic DNA sequence by tetrameric HIV-1 integrase

Background

HIV-1 integrase (IN) catalyses the retroviral integration process, removing two nucleotides from each long terminal repeat and inserting the processed viral DNA into the target DNA. It is widely assumed that the strand transfer step has no sequence specificity. However, recently, it has been reported by several groups that integration sites display a preference for palindromic sequences, suggesting that a symmetry in the target DNA may stabilise the tetrameric organisation of IN in the synaptic complex.

Methodology/Principal Findings

We assessed the ability of several palindrome-containing sequences to organise tetrameric IN and investigated the ability of IN to catalyse DNA cleavage at internal positions. Only one palindromic sequence was successfully cleaved by IN. Interestingly, this symmetrical sequence corresponded to the 2-LTR junction of retroviral DNA circles—a palindrome similar but not identical to the consensus sequence found at integration sites. This reaction depended strictly on the cognate retroviral sequence of IN and required a full-length wild-type IN. Furthermore, the oligomeric state of IN responsible for this cleavage differed from that involved in the 3′-processing reaction. Palindromic cleavage strictly required the tetrameric form, whereas 3′-processing was efficiently catalysed by a dimer.

Conclusions/Significance

Our findings suggest that the restriction-like cleavage of palindromic sequences may be a general physiological activity of retroviral INs and that IN tetramerisation is strongly favoured by DNA symmetry, either at the target site for the concerted integration or when the DNA contains the 2-LTR junction in the case of the palindromic internal cleavage.

HIV-1 Integrase: From Biology to Chemotherapeutics

AIDS has claimed the lives of 25 million people worldwide, an additional 40 million people are HIV-infected and new cases are being diagnosed every year. Despite the fact that HAART has moved AIDS from the category of terminal diseases to that of treatable chronic illnesses, its long-term therapeutic success may be compromised by the development of resistance to the currently used drugs. Despite the availability of RT, PR and fusion inhibitors, the development of further drugs such as inhibitors that target the third enzyme IN is essential for the clinical management of HIV-infected patients. The absence of cellular homolgues to IN and the unique nature of the reactions catalyzed by IN, make it an ideal target for drug design. Considerable progress towards designing HIV-1 IN inhibitors has been made over the last years and several lead compounds have been identified, synthesized and clinically studied. This review focuses on the existing knowledge of the biology of HIV-1 IN with emphasis on the mechanism of integration, structure and function and the technologies for measuring IN activity. This is followed by the current trends on designing HIV-1 IN inhibitors with the aid of molecular informatics and a review on the main classes of HIV-1 IN inhibitors reported this far with special emphasis on the clinical candidates.

Benzyl amide-ketoacid inhibitors of HIV-integrase

Integrase is one of three enzymes expressed by HIV and represents a validated target for therapy. Previous reports have demonstrated that the diketoacid-based chemotype is a useful starting point for the design of inhibitors of this enzyme. In this study, one of the ketone groups is replaced by a benzylamide resulting in a new potent chemotype. A preliminary SAR study is carried out to investigate the substitution requirements on the phenyl ring and methylene group of the benzylamide.

Calculation of binding energy using BLYP/MM for the HIV-1 integrase complexed with the S-1360 and two analogues

Integrase (IN) is one of the three human immunodeficiency virus type 1 (HIV-1) enzymes essential for effective viral replication. S-1360 is a potent and selective inhibitor of HIV-1 IN. In this work, we have carried out molecular dynamics (MD) simulations using a hybrid Quantum Mechanics/Molecular Mechanics (QM/MM) approach, to determine the protein-ligand interaction energy for S-1360 and two analogues. Analysis of the MD trajectories reveals that the strongest protein-inhibitor interactions, observed in the three studied complexes, are established with Lys-159 residue and Mg(2+) cation. Calculations of binding energy using BLYP/MM level of theory reveal that there is a direct relationship between this theoretical computed property and the experimental determined anti-HIV activity.

Inhibiting HIV-1 integrase by shifting its oligomerization equilibrium

Proteins are involved in various equilibria that play a major role in their activity or regulation. The design of molecules that shift such equilibria is of great therapeutic potential. This fact was demonstrated in the cases of allosteric inhibitors, which shift the equilibrium between active and inactive (R and T) states, and chemical chaperones, which shift folding equilibrium of proteins. Here, we expand these concepts and propose the shifting of oligomerization equilibrium of proteins as a general methodology for drug design. We present a strategy for inhibiting proteins by "shiftides": ligands that specifically bind to an inactive oligomeric state of a disease-related protein and modulate its activity by shifting the oligomerization equilibrium of the protein toward it. We demonstrate the feasibility of our approach for the inhibition of the HIV-1 integrase (IN) protein by using peptides derived from its cellular-binding protein, LEDGF/p75, which specifically inhibit IN activity by a noncompetitive mechanism. The peptides inhibit the DNA-binding of IN by shifting the IN oligomerization equilibrium from the active dimer toward the inactive tetramer, which is unable to catalyze the first integration step of 3' end processing. The LEDGF/p75-derived peptides inhibit the enzymatic activity of IN in vitro and consequently block HIV-1 replication in cells because of the lack of integration. These peptides are promising anti-HIV lead compounds that modulate oligomerization of IN via a previously uncharacterized mechanism, which bears advantages over the conventional interface dimerization inhibitors.

Novel HIV integrase inhibitors with anti-HIV activity: insights into integrase inhibition from docking studies

The mechanism of integrase is generally accepted to be dependant on the presence of two divalent metal ions in the active site. However, the only available crystal structures of HIV-1 integrase contain either one or no metal ions, hampering structure-based design studies of integrase inhibitors. For this reason, a two-metal ion model of integrase was constructed. This model was used for computational docking studies with novel diketoacid integrase inhibitors containing pyrimidine nucleobase scaffolds. The docking protocol allowed for some steric contact between the ligand and protein during docking simulations, which implicitly accounted for potential conformational changes in the protein as a result of binding viral DNA or the ligand. The results suggest that the aromatic rings in these diketo acids bind to regions close to the viral DNA and may interfere with mobility of a vital catalytic loop. The docking data also suggest that the ligand can be prevented from adopting a favourable conformation by changes in the relative orientation of its diketo side-chain and aromatic rings. The docked pose of each of the active compounds coordinated both of the metal ions present in the active site of integrase through the diketo acid functionality of these compounds. This result is more consistent with theoretical data on inhibitor mechanism, and thus recommends this docking approach over rigid use of one-metal ion models derived from current crystal structures of integrase.

Interaction between HIV-1 Rev and integrase proteins: a basis for the development of anti-HIV peptides

Human immunodeficiency virus 1 (HIV-1) Rev and integrase (IN) proteins are required within the nuclei of infected cells in the late and early phases of the viral replication cycle, respectively. Here we show using various biochemical methods, that these two proteins interact with each other in vitro and in vivo. Peptide mapping and fluorescence anisotropy showed that IN binds residues 1-30 and 49-74 of Rev. Following this observation, we identified two short Rev-derived peptides that inhibit the 3'-end processing and strand-transfer enzymatic activities of IN in vitro. The peptides bound IN in vitro, penetrated into cultured cells, and significantly inhibited HIV-1 in multinuclear activation of a galactosidase indicator (MAGI) and lymphoid cultured cells. Real time PCR analysis revealed that the inhibition of HIV-1 multiplication is due to inhibition of the catalytic activity of the viral IN. The present work describes novel anti-HIV-1 lead peptides that inhibit viral replication in cultured cells by blocking DNA integration in vivo.

Inhibition of the activities of reverse transcriptase and integrase of human immunodeficiency virus type-1 by peptides derived from the homologous viral protein R (Vpr)

Shortly after infection by human immunodeficiency virus (HIV), two complexes are formed in a stepwise manner in the cytoplasm of infected cells: the reverse transcription complex that later becomes the preintegration complex. Both complexes include, in addition to cellular proteins, viral RNA or DNA and several proteins, such as reverse transcriptase (RT), integrase (IN), and viral protein R (Vpr). These proteins are positioned in close spatial proximity within these complexes, enabling mutual interactions between the proteins. Physical in vitro interactions between RT and IN that affect their enzymatic activities were already reported. Moreover, we found recently that HIV-1 RT-derived peptides bind and inhibit HIV-1 IN and that an IN-derived peptide binds and inhibits HIV-1 RT. Additionally, HIV-1 Vpr and its C-terminal domain affected in vitro the integration activity of HIV-1 IN. Here, we describe the associations of Vpr-derived peptides with RT and IN. Of a peptide library that spans the 96-residue-long Vpr protein, three partially overlapping peptides, derived from the C-terminal domain, bind both enzymes. Two of these peptides inhibit both RT and IN. Another peptide, derived from the Vpr N-terminal domain, binds IN and inhibits its activities, without binding and affecting RT. Interestingly, two sequential C-terminal peptides (derived from residues 57-71 and 61-75 of full-length Vpr) are the most effective inhibitors of both enzymes. The data and the molecular modeling presented suggest that RT and IN are inhibited as a result of steric hindrance or conformational changes of their active sites, whereas a second mechanism of blocking its dimerization state could be also attributed to the inhibition of IN.

The role of lysine 186 in HIV-1 integrase multimerization

HIV-1 integrase (IN) catalyzes biochemical reactions required for viral cDNA insertion into host cell chromosomal DNA, an essential step in the HIV-1 replication cycle. In one of these reactions, the two ends of the linear viral cDNA are believed to be simultaneously ligated to chromosomal DNA by a tetrameric form of IN. The structure of the full-length IN tetramer is not known but a model consisting of the N-terminal domain and the catalytic core revealed basic residues 186 to 188 at the interface between the two IN dimers. We found that alteration of these residues, in particular changing IN lysine residue 186 to glutamate (K186Q), impairs IN oligomerization in the yeast two-hybrid system and decreases oligomeric forms of IN within virions. When expressed independently of other viral proteins in human cells, IN-K186Q did not concentrate in the nucleus as did wild-type IN. Co-expression of wild-type IN restored the multimerization defects of IN-K186Q, in both the two-hybrid system and in virions, and also rescued the nuclear targeting defects. Virions bearing IN-K186Q were not infectious in a single cycle of replication but when mixed virions containing two different IN mutants were produced, IN-K186Q was capable of complementing the catalytically inactive mutant IN-D116A. Our biochemical and functional data support the crystallographic model in which IN residue K186 lies at the interface between IN dimers and suggest that tetramerization is important, not only for concerted integration, but also for IN nuclear targeting.

In-Silico docking of HIV-1 integrase inhibitors reveals a novel drug type acting on an enzyme/DNA reaction intermediate

Background

HIV-1 integrase (IN) is an emerging drug target, as IN strand transfer inhibitors (INSTIs) are proving potent antiretroviral agents in clinical trials. One credible theory sees INSTIs as docking at the cellular (acceptor) DNA-binding site after IN forms a transitional complex with viral (donor) DNA. However, mapping of the DNA and INSTI binding sites within the IN catalytic core domain (CCD) has been uncertain.

Methods

Structural superimpositions were conducted using the SWISS PDB and Cn3D free software. Docking simulations of INSTIs were run by a widely validated genetic algorithm (GOLD).

Results

Structural superimpositions suggested that a two-metal model for HIV-1 IN CCD in complex with small molecule, 1-(5-chloroindol-3-yl)-3-(tetrazoyl)-1,3-propandione-ene (5CITEP) could be used as a surrogate for an IN/viral DNA complex, because it allowed replication of contacts documented biochemically in viral DNA/IN complexes or displayed by a crystal structure of the IN-related enzyme Tn5 transposase in complex with transposable DNA. Docking simulations showed that the fitness of different compounds for the catalytic cavity of the IN/5CITEP complex significantly (P < 0.01) correlated with their 50% inhibitory concentrations (IC₅₀s) in strand transfer assays in vitro. The amino acids involved in inhibitor binding matched those involved in drug resistance. Both metal binding and occupation of the putative viral DNA binding site by 5CITEP appeared to be important for optimal drug/ligand interactions. The docking site of INSTIs appeared to overlap with a putative acceptor DNA binding region adjacent to but distinct from the putative donor DNA binding site, and homologous to the nucleic acid binding site of RNAse H. Of note, some INSTIs such as 4,5-dihydroxypyrimidine carboxamides/N-Alkyl-5-hydroxypyrimidinone carboxamides, a highly promising drug class including raltegravir/MK-0518 (now in clinical trials), displayed interactions with IN reminiscent of those displayed by fungal molecules from Fusarium sp., shown in the 1990s to inhibit HIV-1 integration.

Conclusion

The 3D model presented here supports the idea that INSTIs dock at the putative acceptor DNA-binding site in a IN/viral DNA complex. This mechanism of enzyme inhibition, likely to be exploited by some natural products, might disclose future strategies for inhibition of nucleic acid-manipulating enzymes.

Comparative molecular surface analysis (CoMSA) for virtual combinatorial library screening of styrylquinoline HIV-1 blocking agents

We used comparative molecular surface analysis to design molecules for the synthesis as part of the search for new HIV-1 integrase inhibitors. We analyzed the virtual combinatorial library (VCL) constituted from various moieties of styrylquinoline and styrylquinazoline inhibitors. Since imines can be applied in a strategy of dynamic combinatorial chemistry (DCC), we also tested similar compounds in which the -C=N- or -N=C- linker connected the heteroaromatic and aromatic moieties. We then used principal component analysis (PCA) or self-organizing maps (SOM), namely, the Kohonen neural networks to obtain a clustering plot analyzing the diversity of the VCL formed. Previously synthesized compounds of known activity, used as molecular probes, were projected onto this plot, which provided a set of promising virtual drugs. Moreover, we further modified the above mentioned VCL to include the single bond linker -C-N- or -N-C-. This allowed increasing compound stability but expanded also the diversity between the available molecular probes and virtual targets. The application of the CoMSA with SOM indicated important differences between such compounds and active molecular probes. We synthesized such compounds to verify the computational predictions.

[Analysis on bioactivity of HIV-1 integrase by ELISA method]

OBJECTIVE

To develop an ELISA-based method for analyzing biologic activities of HIV-1 integrase and for high throughput screening of integrase inhibitors.

METHODS

After expression, renaturation and purification of integrase, the bioactivity of integrase and the inhibition of luffin-a were evaluated with an in vitro assay based on biotin-avidin EILSA and chemiluminescent substrates.

RESULT

(1) The specific activity of the purified integrase was 54.92 units/mg of protein. (2)IC(50) (concentration causing 50% inhibition of integrase) of luffin-a was (0.63 +/- 0.026) micromol/L.

CONCLUSION

The non-radioactive assay can be used for analysis of bioactivities and high throughput screening of inhibitors of HIV-1 integrase.

Molecular mechanisms of HIV integration and therapeutic intervention

Retroviruses, such as human immunodeficiency virus type 1 (HIV-1), are plus-sense RNA viruses that require reverse transcription and then DNA integration to establish a chromosomal provirus as an obligate replication intermediate. The viral enzyme reverse transcriptase synthesises linear double-stranded cDNA, which is the template for the viral enzyme integrase. Integrase catalyses two separate chemical reactions: an initial 3' processing of the nascent cDNA ends, which is followed in the cell nucleus by their covalent attachment to the 5' phosphates of a double-stranded staggered cut in chromosomal DNA. As integrase activity is essential for productive retroviral infection, there is intense interest in developing small-molecule inhibitors of the HIV-1 enzyme to increase the breadth of the antiviral arsenal used to fight HIV/AIDS. Purified integrase protein displays the 3' processing and DNA-strand-transfer activities essential for cDNA integration in integration assays in vitro, but numerous studies indicate that cellular proteins play important roles during integration in infected cells. This review highlights the molecular mechanisms behind HIV-1 integration, focusing on recent insights into functions of human cellular cofactors. The progress towards developing integrase inhibitors for their use in the clinic is also reviewed.

Single amino acid substitution in HIV-1 integrase catalytic core causes a dramatic shift in inhibitor selectivity

HIV-1 integrase (IN) mediates the insertion of viral cDNA into the cell genome, a vital process for replication. This step is catalyzed by two separate DNA reaction events, termed 3'-processing and strand transfer. Here, we show that six inhibitors from five structurally different classes of compounds display a selectivity shift towards preferential strand transfer inhibition over the 3'-processing activity of IN when a single serine is substituted at position C130. Even though IN utilizes the same active site for both reactions, this finding suggests a distinct conformational dissimilarity in the mechanistic details of each IN catalytic event.

Target recognition by catechols and beta-ketoenols: potential contribution of hydrogen bonding and Mn/Mg chelation to HIV-1 integrase inhibition

Catechol and beta-ketoenol are important pharmacophores of HIV-1 integrase (IN) inhibitors. We investigated their recognition of the divalent metals, Mg and Mn, and of hydrogen bond donors (HBD) and acceptors (HBA). We used data retrieved from the Cambridge Structural Database (CSD), applying a 3-D structure-based, in silico-driven approach. We found that both biophores were stabilized by intramolecular H-bonding (IHB), which was weak in catechols and very strong in beta-ketoenols. Catechols tended to recognize environmental HBD and HBA, demonstrating their ability to make use of both hydroxyl groups to form multiple, strong intermolecular H-bonds. In contrast, beta-ketoenols stabilized by strong IHB inefficiently formed intermolecular H-bonds. beta-Ketoenolate chelated both Mg and Mn ions much more efficiently than dioxolene, which was highly selective for Mn cations. The significant differences in the ability of these two pharmacophores to bind HBD and HBA and in their ability to chelate Mg and Mn have important consequences for competitive inhibitor binding and selectivity for metals and integrase DNA-binding sites.

Small-angle X-ray characterization of the nucleoprotein complexes resulting from DNA-induced oligomerization of HIV-1 integrase

HIV-1 integrase (IN) catalyses integration of a DNA copy of the viral genome into the host genome. Specific interactions between retroviral IN and long terminal repeats (LTR) are required for this insertion. To characterize quantitatively the influence of the determinants of DNA substrate specificity on the oligomerization status of IN, we used the small-angle X-ray scattering (SAXS) technique. Under certain conditions in the absence of ODNs IN existed only as monomers. IN preincubation with specific ODNs led mainly to formation of dimers, the relative amount of which correlated well with the increase in the enzyme activity in the 3'-processing reaction. Under these conditions, tetramers were scarce. Non-specific ODNs stimulated formation of catalytically inactive dimers and tetramers. Complexes of monomeric, dimeric and tetrameric forms of IN with specific and non-specific ODNs had varying radii of gyration (R(g)), suggesting that the specific sequence-dependent formation of IN tetramers can probably occur by dimerization of two dimers of different structure. From our data we can conclude that the DNA-induced oligomerization of HIV-1 IN is probably of importance to provide substrate specificity and to increase the enzyme activity.

Discovery of small-molecule HIV-1 fusion and integrase inhibitors oleuropein and hydroxytyrosol: part II. integrase inhibition

We report molecular modeling and functional confirmation of Ole and HT binding to HIV-1 integrase. Docking simulations identified two binding regions for Ole within the integrase active site. Region I encompasses the conserved D64-D116-E152 motif, while region II involves the flexible loop region formed by amino acid residues 140-149. HT, on the other hand, binds to region II. Both Ole and HT exhibit favorable interactions with important amino acid residues through strong H-bonding and van der Waals contacts, predicting integrase inhibition. To test and confirm modeling predictions, we examined the effect of Ole and HT on HIV-1 integrase activities including 3'-processing, strand transfer, and disintegration. Ole and HT exhibit dose-dependent inhibition on all three activities, with EC(50)s in the nanomolar range. These studies demonstrate that molecular modeling of target-ligand interaction coupled with structural-activity analysis should facilitate the design and identification of innovative integrase inhibitors and other therapeutics.

[HIV-1 integrase inhibition by modified oligonucleotides: optimization of the inhibitor structure]

Integration of human immunodeficiency virus type 1 DNA into the infected cell genome is one of the key steps of the viral replication cycle. Therefore viral enzyme integrase, which realizes the integration, is of interest as a target for new antiviral drugs. Conjugates of 11-mer single stranded oligonucleotides with hydrophobic molecules are shown to be efficient integrase inhibitors since they induce dissociation of the integrase-viral DNA complex. The effect of the oligonucleotide length and structure as well as the structure of hydrophobic molecules on the conjugate inhibitory activity has been studied. Conjugates with eosin and oleic acid are shown to be the most active. Conjugates of these molecules with 2'-O-methyl-oligonucleotide inhibit integrase at 50-100 nM and have no influence on a number of other DNA-binding enzymes.

Quantitative structure–activity relationship studies of HIV-1 integrase inhibition. 1. GETAWAY descriptors

The GEometry, Topology, and Atom-Weights AssemblY (GETAWAY) approach has been applied to the study of the HIV-1 integrase inhibition of 172 compounds that belong to 11 different chemistry families. A model able to describe more than 68.5% of the variance in the experimental activity was developed with the use of the mentioned approach. In contrast, none of the five different approaches, including the use of Randić Molecular Profiles, Geometrical, RDF, 3D-MORSE and WHIM descriptors was able to explain more than 62.4% of the variance in the mentioned property with the same number of variables in the equation. Finally, after extracting five compounds considered by us as outliers the model was able to describe more than 72.5% of the variance in the experimental activity.

Natural polymorphism of the HIV-1 integrase gene and mutations associated with integrase inhibitor resistance

BACKGROUND

Two inhibitors of the HIV-1 integrase enzyme (INIs) are in late stage clinical development. To date, approximately 42 mutations within the HIV-1 integrase (IN) gene have been associated with INI drug resistance. Naturally occurring IN gene polymorphisms may have important implications for INI development. In this study, we evaluated clinical HIV-1 strains from INI-naive patients to determine the prevalence of IN gene polymorphisms, and the frequency of naturally occurring amino acid (aa) substitutions at positions associated with INI resistance and at sites crucial for LEDGF/p75 binding and HIV-1 integration.

METHODS

The IN gene from 67 INI-naive, HIV-1 clade B-infected patients were sequenced using standard population-based DNA sequencing methods. In addition, 176 unique full-length HIV-1 clade B IN gene sequences from INI-naive patients obtained from the HIV Los Alamos database were analysed.

RESULTS

Analysis of 243 IN genes from HIV-1 clade B, INI-naive clinical strains revealed that 64% of the aa positions were polymorphic. Of the 42 aa substitutions currently associated with INI resistance, 21 occurred as natural polymorphisms: V72I, L74I, T97A, T112I, A128T, E138K, Q148H, V151I, S153Y/A, M154I, N155H, K156N, E157Q, G163R, V165I, V201I, I203M, T206S, S230N and R263K. IN aa positions crucial to LEDGF/P75 binding and HIV-1 integration were well conserved.

CONCLUSION

Major INI mutations within the catalytic domain and extended active sites associated with high level resistance to the compounds in late stage development, especially strand transfer inhibitors (STIs), were infrequent in our study, which may help explain the excellent virological responses demonstrated in clinical trials.

Inhibition of human immunodeficiency virus type-1 reverse transcriptase by a novel peptide derived from the viral integrase

Previous studies show that the reverse transcriptase (RT) of human immunodeficiency virus type-1 (HIV-1) and RT-derived peptides interact with and inhibit the viral integrase (IN). In the present study, we have performed the complementary study by screening a complete library of HIV-1 IN-derived peptides for their effects on the RT. We have identified a 20-residues long peptide, derived from the IN (residues 46-65) that binds the RT and inhibits its DNA-polymerase activities (without affecting the ribonuclease-H activity). The full 20-residues sequence is required for maximal inhibition. This inhibition is non-competitive and probably results from obstructing the formation of RT-DNA complexes by the peptide. The data and the molecular docking model presented suggest that this inhibition is probably caused by a steric hindrance or conformational changes of the RT. These results can facilitate the development of novel and specific peptide-based HIV-1 RT inhibitors that might help in the fight against AIDS.

Posttranslational acetylation of the human immunodeficiency virus type 1 integrase carboxyl-terminal domain is dispensable for viral replication

A recent report sought to demonstrate that acetylation of specific lysines within integrase (IN) by the histone acetyltransferase (HAT) p300 regulates human immunodeficiency virus type 1 (HIV-1) integration and is essential for viral replication (A. Cereseto, L. Manganaro, M. I. Gutierrez, M. Terreni, A. Fittipaldi, M. Lusic, A. Marcello, and M. Giacca, EMBO J. 24:3070-3081, 2005). We can corroborate the efficient and specific acetylation of the IN carboxyl-terminal domain (CTD) (amino acids 212 to 288) by p300 using purified recombinant components. Although arginine substitution mutagenesis of the isolated CTD confirms that the majority of p300 acetylation occurs at lysine residues 264, 266, and 273, the pattern of acetylation is not uniform and a hierarchy of reactivity can be established. Several combinatorial mutations of the CTD lysines modified by p300 in vitro were reconstructed into an otherwise infectious proviral plasmid clone and examined for viral growth and frequency of productive chromosomal integration. In contrast to the findings of Cereseto and coworkers, who used epitope-tagged viruses for their experiments, we find that an untagged mutant virus, IN K(264/266/273)R, is fully replication competent. This discrepancy may be explained by the use of an acidic epitope tag placed at the extreme carboxyl terminus of integrase, near the target site for acetylation. Although the tagged, wild-type virus is viable, the combination of this epitope tag with the RRR substitution mutation results in a replication-defective phenotype. Although IN belongs to the very small set of nonhistone proteins modified by HAT-mediated activity, an obligate role for acetylation at the reactive CTD lysines in HIV-1 IN cannot be confirmed.

Probing HIV-1 integrase inhibitor binding sites with position-specific integrase-DNA cross-linking assays

HIV-1 integrase binds site-specifically to the ends of the viral cDNA. We used two HIV-1 integrase-DNA cross-linking assays to probe the binding sites of integrase inhibitors from different chemical families and with different strand transfer selectivities. The disulfide assay probes cross-linking between the integrase residue 148 and the 5'-terminal cytosine of the viral cDNA, and the Schiff base assay probes cross-linking between an integrase lysine residue and an abasic site placed at selected positions in the viral cDNA. Cross-linking interference by eight integrase inhibitors shows that the most potent cross-linking inhibitors are 3'-processing inhibitors, indicating that cross-linking assays probe the donor viral cDNA (donor binding site). In contrast, strand transfer-selective inhibitors provide weak cross-linking interference, consistent with their binding to a specific acceptor (cellular DNA) site. Docking and crystal structure studies illustrate specific integrase-inhibitor contacts that prevent cross-linking formation. Four inhibitors that prevented Schiff base cross-linking to the conserved 3'-terminal adenine position were examined for inhibition at various positions within the terminal 21 bases of the viral cDNA. Two of them selectively inhibited upper strand cross-linking, whereas the other two had a more global effect on integrase-DNA binding. These findings have implications for elucidating inhibitor binding sites and mechanisms of action. The cross-linking assays also provide clues to the molecular interactions between integrase and the viral cDNA.

Biotinylated biphenyl ketone-containing 2,4-dioxobutanoic acids designed as HIV-1 integrase photoaffinity ligands

The diketo acid (DKA) class of HIV-1 integrase inhibitors are thought to function by chelating divalent metal ions within the enzyme catalytic center. However, differences in mutations conferring resistance among sub-families of DKA inhibitors suggest that multiple binding orientations may exist. In order to facilitate identification of DKA-binding sites, biotin-tagged biphenyl ketone-containing 2,4-dioxobutanoic acids were prepared as DKA photoaffinity probes. Introduction of biotin was obtained by means of Huisgen [3+2] cycloaddition 'click chemistry.' Two photoprobes, 5a and 5b, were prepared bearing short and long linker segments, respectively, between the biotin and DKA nucleus. The greatest inhibitory potency was shown by 5b, which inhibited 3'-processing and strand transfer reactions with IC50 values of > 333 microM and 12.4 microM, respectively. In cross-linking assays designed to measure disruption of substrate DNA binding, the photoprobes behaved similarly to a reference DKA inhibitor. Analogues 5a and 5b represent novel photoaffinity ligands, which may be useful in clarifying the HIV-1 binding interactions of DKA inhibitors.