Upregulation of the TRPA1 Ion Channel in the Gastric Mucosa after Iodoacetamide-Induced Gastritis in Rats: A Potential New Therapeutic Target

Acute gastritis is often untreatable by acid secretion-inhibiting drugs. Understanding the protective mechanisms including the role of Transient Receptor Potential Ankyrin1 (TRPA1) and Vanilloid1 (TRPV1) channels localized on capsaicin-sensitive afferents and non-neuronal structures might identify novel therapeutic approaches. Therefore, we characterized a translational gastritis model using iodoacetamide (IAA) and investigated TRPA1/V1 expressions. Wistar rats and CD1, C57Bl/6J mice were exposed to IAA-containing (0.05, 0.1, 0.2, 0.3, 0.5%) drinking water for 7 or 14 days. Body weight and water consumption were recorded daily. Macroscopic lesions were scored, qualitative histopathologic investigation was performed, TRPA1/V1 immunopositivity and mRNA expressions were measured. IAA induced a concentration-dependent weight loss and reduced water intake in both species. Hyperemia, submucosal edema, inflammatory infiltration and hemorrhagic erosions developed after 7 days, while ulcers after 14 days in rats. Trpa1 mRNA/protein expressions were upregulated at both timepoints. Meanwhile, TRPV1 immunopositivity was upregulated in the gastric corpus after 0.05% IAA ingestion, but downregulated after 0.2%, whereas Trpv1 mRNA did not change. Interestingly, no macroscopic/microscopic changes were observed in mice. These are the first data for the concentration- and duration-dependent changes in the IAA-induced gastritis in rats accompanied by TRPA1 upregulation, therefore, its therapeutic potential in gastritis should further be investigated.

Release mechanisms and applications of drug delivery systems for extended-release

INTRODUCTION

Drug delivery systems with extended-release profiles are ideal in improving patient compliance with enhanced efficacy. To develop devices capable of a prolonged delivery kinetics, it is crucial to understand the various underlying mechanisms contributing to extended drug release and the impact thereof on modulating the long-term performance of such systems in a practical application environment.

AREAS COVERED

This review article intends to provide a comprehensive summary of release mechanisms in extended-release drug delivery systems, particularly polymer-based systems; however, other material types will also be mentioned. Selected current research in the delivery of small molecule drugs and macromolecules is highlighted. Emphasis is placed on the combined impact of different release mechanisms and drug properties on the long-term release kinetics in vitro and in vivo.

EXPERT OPINION

The development of drug delivery systems over an extended duration is promising but also challenging when considering the numerous interrelated delivery-related parameters. Achieving a well-controlled extended drug release requires advanced techniques to minimize burst release and lag phase, a better understanding of the dynamic interrelationship between drug properties and release profiles over time, and a thorough elucidation of the impact of multiple in vivo conditions to methodically evaluate the eventual clinical efficacy.

Swelling properties of roasted coffee particles

BACKGROUND

In this study, the swelling behavior of roasted coffee particles in water and particularly its impact on particle diameter is examined by applying laser-diffraction analysis and microscopy. Several potential influencing factors are investigated: initial particle size, roasting degree, and temperature. Additionally, the time dependency of swelling and particle shape is evaluated at two different temperatures.

RESULTS

We verify that particle erosion occurs - as observed by an increase of the fine particle fraction after wetting - and it is revealed that this effect is more pronounced with a rise in temperature. The total relative increase in particle size is determined as approximately 15% based on a broad range of different sized coffee grounds. It is demonstrated that the degree of swelling is independent of both the initial particle diameter and the roasting degree. The particle shape is found to be unaffected by swelling. This research reveals that swelling is initially quick, with 60-80% of the final steady-state diameter being reached after 30 s and completed after 4 min of wetting, i.e. within the timescale of conventional coffee brewing methods.

CONCLUSION

This work provides a better understanding of the impact of wetting as part of the coffee brewing process, thus aiding the design, modeling, and optimization of coffee extraction. It clarifies the strong deviation of previous results on coffee-particle swelling by considering particle erosion and degassing and provides a robust method for quantification. © 2020 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Surface Etching of 3D Printed Poly(lactic acid) with NaOH: A Systematic Approach

The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds.

Measurement of erosion depth using microcomputed tomography and light microscopy

Tooth-erosion is the surface loss of dental hard tissue mostly associated with an acid attack. The aim was to compare dentin and enamel erosion depth measurements using micro-computed tomography (microCT) and light microscopy (LM). Enamel/dentin blocks were prepared from caries-free human molar-teeth (N = 12). Teeth were sectioned to a rectangular shape of 4 × 4 × 6 mm. Specimens were treated with water (NC) or 1.0% citric-acid solution (PC). After treatment, specimens were scanned with micro-computed tomography. On completion, specimens were sectioned and observed under a light-microscope. Lesion depth was observed with 10× magnification and images transferred to Simpleware software. Vertical distance from lesion surface to bottom was measured. Pearson correlation test was used to evaluate correlation and Wilcoxon Signed Rank test to evaluate differences in the two-analysis methods. Mean enamel erosion depth was 0.63 and 38.38 μm (microCT) and 0.54 and 39.43 μm (LM) for NC and PC, respectively. Dentin erosion depth was 0.72 and 48.05 μm (microCT) and 0.56 and 49.92 μm (LM) for NC and PC, respectively. There was a significant correlation between the two-analysis methods (r = 0.998; p < .001). No statistically significant difference in results were obtained when microCT and LM were compared (p = .584). This results obtained from the current study suggested that erosion depth measurements made using microCT and LM yielded comparable results. The microCT method is preferred if the conservation of specimens is desired.

Does glenoid remodeling occur with an erosion-type bone loss after arthroscopic Bankart repair?

Introduction

Fragment-type glenoid bone loss is known to remodel after arthroscopic Bankart repair. To our knowledge, no studies have been reported about the morphologic changes of the erosion-type bone loss.

Aim

To determine the morphologic changes of erosion-type glenoid bone loss after arthroscopic Bankart repair.

Methods

Twenty-eight patients (mean age: 31 years) with traumatic anterior glenohumeral instability with an erosion-type glenoid bone loss <25% underwent arthroscopic Bankart repair. The minimum follow-up was 2 years. Pre- and postoperative bilateral computed tomography scans were performed in all patients. The width and surface area of the glenoid were measured by a software program and compared pre- and postoperatively.

Results

The recurrence rate was 7.1% (2 of 28 shoulders). The size of the bone loss was 7.2% ± 5.3% (mean ± standard deviation). The preoperative glenoid width and area were 24.9 ± 2.2 mm and 7.0 ± 0.8 cm², respectively, and the postoperative ones (2 years after surgery) were 24.7 ± 2.2 mm and 6.8 ± 0.8 cm², respectively. There were no significant differences between the pre- and postoperative glenoid width and area.

Discussion and conclusion

Unlike the fragment-type bone loss, the erosion-type bone loss <25% did not show any morphologic changes of the glenoid at least 2 years after arthroscopic Bankart repair.

Triple osteotomy for erosive first metatarsal in a patient with rheumatoid arthritis: a case report

Recently, over the half of the patients with rheumatoid arthritis achieved clinical remission with beneficial effects of disease modifying anti-rheumatic drugs, including biological disease modifying anti-rheumatic drugs. Because the patients in remission should have no/reduced progression of joint damage, there is a trend towards joint-preserving surgery in the treatment of rheumatoid forefoot deformities. Here we report a 76-year-old woman with rheumatoid arthritis developed a severe forefoot deformity including a large bony erosion of the first metatarsal head. She showed near remission for rheumatoid arthritis without having clinically active synovitis in her MTP joints. To preserving her metatarsophalangeal joint, a double first metatarsal osteotomy was planned to remove the bony erosion and simultaneously correct the hallux valgus. Thirty-month follow-up demonstrated excellent radiographical and patient-reported outcomes. To the best of our knowledge, this is the first case of a double first metatarsal osteotomy to remove the bony erosion and simultaneously correct the hallux valgus in a patient with rheumatoid arthritis with a large erosion of the first metatarsal head.

Effect of a Single Application of CPP-ACPF Varnish on the Prevention of Erosive Tooth Wear: An AAS, AFM and SMH Study

PURPOSE

The aim of this study was to investigate the in vitro effect of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride-containing varnish on prevention enamel erosive tooth wear.

MATERIALS AND METHODS

A total of 28 enamel samples were prepared from human molars, divided into four groups: CPP-ACPF varnish, TCP-F varnish, NaF varnish, and deionised water. For the remineralisation process stimulated human pooled saliva was used. After treatment, all enamel samples were exposed to 10 ml of Coca Cola. Ca++ release was determined by atomic absorption spectroscopy (AAS). The surface topography was evaluated by atomic force microscopy (AFM). Surface microhardness of enamel was analysed and SMHR % (surface microhardness reduction ) was calculated. Data were analysed with repeated measures analysis of variance (ANOVA).

RESULTS

Deionised water demonstrated a statistically significantly higher Ca+2 release compared to those of groups NaF > fTCP > CPP-ACPF, respectively (p <0.01). All groups measured for root-mean-square-roughness (Rrms) showed a statistically significantly difference of 6 × 6 μm2 and 12 × 12 μm2 enamel area (p <0.05) compared with a negative control group. CPP-ACPF varnish showed rougher surfaces than all remineralisation groups. SMHR % of enamels were as follows: CPP-ACPF < fTCP < NaF < deionised water (p <0.01).

CONCLUSION

According to the findings of this study; CPP-ACP containing agents have a statistically statistically significant effect on preventing dental erosion. Among these, CPP-ACPF-containing remineralisation agents have the most effect on the remineralisation process.

A simplified radiographic score effectively predicts radiographic progression of early arthritis in a large nationwide French cohort

OBJECTIVE

Evaluating radiographic progression is a key component of the follow-up of patients with RA. Existing scores are ill-suited to everyday clinical practice. The objective here was to validate a new simplified radiographic score (SRS) for evaluating radiographic progression in patients with early arthritis.

METHODS

Patients with arthritis of <6 months' duration were included in the large, prospective, nationwide, French ESPOIR cohort. Radiographs of the hands and feet were obtained at inclusion then 1 and 5 years later. The modified Sharp scores and SRS were determined by blinded readers. Interobserver reliability and intraobserver repeatability of each score, as well as agreement between the two scores, were assessed by computing the intraclass correlation coefficients. The rates of progression over the first year and the next 4 years were determined.

RESULTS

The 506 patients with complete data for the first 5 years were included. At inclusion, the intraclass correlation coefficient between the two scores was good for erosions (0.715, P < 0.001), joint space narrowing (0.892, P < 0.001) and the total score (0.896, P < 0.001). Agreement between the two scores was also good for radiographic progression after 1 year (0.781, P < 0.001). The SRS had good positive and negative predictive values for slow and for rapid progression. SRS determination was less time consuming.

CONCLUSION

The SRS is effective for monitoring radiographic progression in early arthritis and is easier to use and less time-consuming than the Sharp score. The usefulness of the SRS in clinical practice deserves further evaluation.

Not just another large atrial septal defect: complex anatomy, challenging procedure, and an unusual complication

We report the case of a 59-year-old patient with a complex atrial septal defect in whom a 40-mm Amplatzer™ septal occluder was surgically extracted 50 days following implantation. Deployment manoeuvres were challenging leading to an immediate pericardial effusion that was closely monitored and uneventfully drained after 11 days. A dry pericardium was documented until 4 weeks of outpatient routine follow-up. However, the device was surgically explanted 2 weeks later, when an urgent chest computed tomography performed for worrisome symptoms showed pericardial effusion recurrence with peripheral contrast enhancement. Surprisingly, the surgical view showed a well-positioned device and an intact pericardium. We discuss the atypical sequence of clinical findings misleading our clinical judgement and precipitating surgery.

Medium- to long-term results of acromioclavicular joint stabilisation using the Ligament Augmentation Reconstruction System (LARS) ligament

BACKGROUND

Opinion is divided as to optimum management of grade III acromioclavicular joint injuries that have failed conservative management. We objectively investigated the radiological and functional outcome of acromioclavicular joint reconstruction using the Ligament Augmentation Reconstruction System (LARS®).

METHODS

Retrospective review of patients with LARS reconstruction of acromioclavicular joint dislocations with minimum six-year follow-up. Functional assessment was performed using the constant score, Disability of Arm Shoulder and Hand score and simple satisfaction score. Radiological assessment was undertaken using plain radiographs. Results were compared with the uninjured limb.

RESULTS

Twenty-four of 25 patients were included. Mean constant score for the injured shoulder was 87.0, Disability of Arm Shoulder and Hand score was 11.6. All patients indicated that they would have the operation again. There were five complications including two patients that suffered small cracks in the clavicle. Coracoid erosion was frequently seen but was most often minor. In two cases, this resulted in a complete dissociation of the coracoid tip but without functional detriment.

DISCUSSION

LARS is a safe and effective method of acromioclavicular joint reconstruction producing good results, and we recommend its use for these injuries. We also caution clinicians who use cerclage methods to be aware of coracoid erosion when following up their patients.

Cryptogams signify key transitions of bacteria and fungi in Arctic sand dune succession

Primary succession models focus on aboveground vascular plants. However, the prevalence of mosses and lichens, that is cryptogams, suggests they play a role in soil successions. Here, we explore whether effects of cryptogams on belowground microbes can facilitate progressive shifts in sand dune succession. We linked aboveground vegetation, belowground bacterial and fungal communities, and soil chemical properties in six successional stages in Arctic inland sand dunes: bare sand, grass, moss, lichen, ericoid heath and mountain birch forest. Compared with the bare sand and grass stages, microbial biomass and the proportion of fungi increased in the moss stage, and later stage microbial groups appeared despite the absence of their host plants. Microbial communities of the lichen stage resembled the communities in the vascular plant stages. Bacterial communities correlated better with soil chemical variables than with vegetation and vice versa for fungal communities. The correlation of fungi with vegetation increased with vascular vegetation. Distinct bacterial and fungal patterns of biomass, richness and plant-microbe interactions showed that the aboveground vegetation change structured the bacterial and fungal community differently. The asynchrony of aboveground vs belowground changes suggests that cryptogams can drive succession towards vascular plant dominance through microbially mediated facilitation in eroded Arctic soil.

Nanocapsule pH Regulator: Sustained Continuous Alkali Release from Thermosensitive Liposomes Reduces Acid Erosion

Thermosensitive liposomes are major drug delivery carriers, which enable targeting of drugs and burst release of the drugs from the liposomes at the site of action by applying a local heat stimulation above body temperature. Although the burst release is significant for a one-shot high-rate release of drugs at the target site, this type of release has a limited sustained action of the drugs. In this study, we report the alkali-encapsulating thermosensitive liposomes enabling environment pH regulation by sustained continuous cargo release at human body temperature. The liposomes encapsulating alkalis successfully neutralized the environmental acids for hours by releasing the alkalis and prevented acid erosion of hydroxyapatite matrix. Taken together, the present liposomes are effective for the sustained release of cargo at body temperature, specifically the alkali-encapsulating liposomes can be a preventing agent for dental caries in the oral cavity. The sustained release under endogenous body heat characteristics of thermosensitive liposomes showcased in this study can also be extended for prolonged intravenous drug exposure from targeted liposomal drug nanotherapeutics in the near future.

Influence of Erosion/Abrasion and the Dentifrice Abrasiveness Concomitant with Bleaching Procedures

Purpose

The aim of this study was to evaluate the effect of erosive/abrasive cycles and two different levels of abrasiveness of dentifrices over enamel and dentin subjected to bleaching.

Methods

Enamel and dentin bovine specimens were prepared and submitted to an at-home bleaching treatment using 9.5% hydrogen peroxide gel, which was applied daily (30 min/14 days). Concomitant with bleaching, an erosive cycle was performed using citric acid (0.3%, pH 3.8, 5 mins, 3×/day), followed by immersions in artificial saliva for remineralization (30 mins). Abrasion was done with two (high and low abrasiveness) dentifrices (2×/day, 120 seconds) after the first and third erosive immersion each day. Enamel and dentin softening were assessed by microhardness and erosive tooth wear by optical profilometry. Data were submitted to repeated measures ANOVA, followed by the Tukey’s test with a significance level of 5%.

Results

For the enamel and considering the erosive-abrasive cycle, significant differences were found between the groups tested, the bleaching, and the abrasiveness of the dentifrice tested; however, the final microhardness values were significantly lower than the initial ones. For dentin, differences were found between the eroded/abrasion and the non-eroded/abrasion groups, with the former presenting lower microhardness values compared with the latter. In addition, bleaching decreased the microhardness values only for the highly abrasive dentifrice, and the final values were lower than for the initial ones for all tested groups.

Conclusion

The use of high and low abrasiveness dentifrices during bleaching and concomitant with erosion/abrasion cycles is more harmful to dentin than to enamel.

Clinical Relevance

Although bleaching is considered a conservative treatment, it can cause deleterious effects to dental hard tissue. The association of an at-home bleaching technique with erosion and high- or low- abrasive dentifrices harms dentin more than enamel.

Erosive effect of milk, honey, cereal porridge, and millet porridge on enamel of primary teeth: An in vitro study

Context

Enamel erosion is manifested as partial demineralization occurring at the enamel surface leading to increased surface roughness. Diets comprising milk, cereals, and millets are frequently fed to infants and toddlers. These foods are prepared so as to make them soft in texture, palatable, and easy to ingest.

Aim

To determine the erosive effect of milk, honey, and porridges made from cereal and millet on primary tooth enamel.

Settings and Design

Exfoliated caries-free primary teeth were collected, and a total of 50 longitudinal sections were prepared. They were equally divided into five groups of 10 samples each.

Materials and Methods

Each group was incubated in milk, honey, cereal porridge, millet porridge, or saliva for 30 min. Subsequently the samples were washed and incubated at 37°C in saliva for 2 h. This cycle was repeated five times. The samples were gold sputter coated, and surface roughness was measured using optical profilometry. Saliva samples were evaluated for calcium release using dry chemistry method. The pH of foods and titratable acidity were also estimated.

Statistical Analysis Used

One way analysis of variance and Tukey's post hoc test.

Results

The mean surface roughness value, Ra (μm), obtained with millet porridge was 6.0175 ± 0.54 μm, which was significantly higher than cereal porridge, honey, and milk (P < 0.05). Calcium release in saliva was highest with honey (>14 mg/dL) and it also exhibited the lowest pH (4.33).

Conclusion

Porridges prepared from millet and brown rice cereals were seen to have an erosive effect on the enamel of primary teeth.

Artificial Neural Network and Response Surface Methodology Based Analysis on Solid Particle Erosion Behavior of Polymer Matrix Composites

Polymer-based fibrous composites are gaining popularity in marine and sports industries because of their prominent features like easy to process, better strength to weight ratio, durability and cost-effectiveness. Still, erosive behavior of composites under cyclic abrasive impact is a significant concern for the research fraternity. In this paper, the S type woven glass fibers reinforced polymer matrix composites (PMC_s) are used to analyze the bonding behavior of reinforcement and matrix against the natural abrasive slurry. The response surface methodology is adopted to analyze the effect of various erosion parameters on the erosion resistance. The slurry pressure, impingement angle and nozzle diameter, were used as erosion parameters whereas erosion loss, i.e., weight loss during an erosion phenomenon was considered as a response parameter. The artificial neural network model was used to validate the attained outcomes for an optimum solution. The comparative analysis of response surface methodology (RSM) and artificial neural network (ANN) models shows good agreement with the erosion behavior of glass fiber reinforced polymer matrix composites.

Kelp beds as coastal protection: wave attenuation of Ecklonia radiata in a shallow coastal bay

BACKGROUND AND AIMS

Coastal protection from erosion and flooding is a significant ecosystem service provided by vegetated marine systems. Kelp beds are a dominant habitat-forming species on temperate reefs worldwide. While they are valued as hotspots of biodiversity, there is a paucity of information that supports their use in nature-based coastal defence. This includes the effectiveness of kelp beds in attenuating waves approaching the shore and how this influences sediment transport.

METHODS

Wave loggers were deployed at paired kelp bed and control (urchin barren) treatments at four sites in Port Phillip Bay, Australia. The significant wave height offshore (exposed side) to onshore (sheltered side) of the treatment were compared to determine wave attenuation.

KEY RESULTS

At three sites, the wave attenuation of kelp beds was significantly less than that of the control. This result was consistent across the environmental conditions recorded in this study. At the fourth site, on average there was no significant difference in wave transmission between kelp and control. However, wave attenuation at kelp beds was 10 % greater than the control during periods of northerly winds. We highlight the importance of disentangling the effects of the reef substratum and kelp when evaluating the efficacy of kelp at providing coastal protection.

CONCLUSIONS

We have highlighted a significant gap in the research on ecosystem services provided by kelp beds. A greater understanding is needed on which kelp species are able to provide coastal protection, and under what conditions. Such future research is essential for providing managers and policy makers with actionable information on sustainable and cost-effective solutions for coastal defence when faced with a changing climate.

Comparison of 3.5 cm and transcorporal cuffs in high-risk artificial urinary sphincter populations

Background

The transcorporal (TC) artificial urinary sphincter (AUS) has traditionally been utilized in high-risk patients with urethral atrophy or prior urethral erosion. The 3.5 cm AUS cuff has been developed for use in a similar population. We compared the outcomes of TC AUS and 3.5 cm cuff patients to assess whether the TC approach was protective against urethral complications.

Methods

We performed a retrospective review for all men who underwent TC AUS and 3.5 cm AUS implantation by a single surgeon from 2007 to 2018 at a tertiary medical center. Demographic and outcomes data were collected and analyzed after database review to evaluate for rates of urethral erosion. Multivariate logistic regression was performed to identify co-morbid factors associated with urethral erosion.

Results

In our database of 625 AUS patients, we identified 59 (9%) men with TC AUS and 168 (27%) having a 3.5 cm cuff. Over a median follow-up time of 49 months, 28 (47%) men with TC cuffs developed urethral erosion compared with 25 (15%) men with a 3.5 cm cuff. On univariate analysis, a TC cuff was associated with increased odds of erosion (OR 6.65, 95% CI: 3.20-14.4, P<0.0001) when compared with a 3.5 cm cuff. On multivariate analysis, TC cuffs continued to portend significantly increased odds of cuff erosion.

Conclusions

With longer follow up, TC AUS may not be as protective against urethral complications as previously described.

Material Analysis and Molecular Dynamics Simulation for Cavitation Erosion and Corrosion Suppression in Water Hydraulic Valves

In the milestone of straggling to make water hydraulics more advantageous, the choice of coating polymer for water hydraulics valves plays an essential role in alleviating the impact of cavitation erosion and corrosion, and this is a critical task for designers. Fulfilling the appropriate selection, we conflicted properties that are vital for erosion and corrosion inhibitors, as well as the tribology in the sense of coefficient of friction. This article aimed to choose the best alternative polymer for coating on the selected substrate, that is, Cr₂O₃, Al₂O₃, T_i2O₃. By applying PROMETHEE (Preference Ranking Organization Method for Enrichment Evaluations), the best polymer obtained with an analyzed performance attribute is Polytetrafluoroethylene (PTFE) that comes up with higher outranking (0.5932052). A Molecular Dynamics (MD) simulation was conducted to identify the stronger bonding with the regards of the better cleave plane between Polytetrafluoroethylene (PTFE) and the selected substrate. Polytetrafluoroethylene (PTFE)/Al₂O₃ cleaved in (010) plane was observed to be the strongest bond in terms of binding energy (3188 kJ/mol) suitable for further studies.

Research on the influence of elbow erosion characteristics based on bionic earthworm dorsal pore jet

Based on the biological characteristics of earthworm, the dorsal pore jet parameters were analyzed to establish elbow erosion model. The discrete phase model and standard k-ε turbulence model were used to carry on numerical simulation of the erosion characteristics and study the mechanism of improving elbow erosion characteristics. The results showed that the most serious erosion area was the elbow lower surface, while bionic earthworm dorsal pore jet could significantly reduce the erosion rate of this area, thereby reducing the overall erosion rate. When the jet velocity was the same, the smaller the jet distance, the lower the erosion rate would be. With the increase of the jet velocity, the erosion rate decreased first and then increased. When the jet distance was 0.5 times the elbow diameter and the jet velocity was 0.3 times the flow velocity, the erosion rate was the lowest (decreased by 79.29%). When the jet velocity was less than 0.5 m·s-1, low-velocity strips formed at elbow lower surface due to the jet and reduced the kinetic energy of the solid particles near the wall; when the jet velocity was greater than 0.2 times the flow velocity, vortex cushion effect formed, therefore reduced the erosion rate significantly.

Mesh complications: best practice in diagnosis and treatment

Mesh was a promising, minimally invasive, and 'gold standard' treatment for urinary stress incontinence. Time has shown that complications from these devices can happen early, or even several years, after mesh placement and can be catastrophic. Pain, erosion, voiding dysfunction, infection, recurrent UTIs [urinary tract infections (UTIs)], fistulae, organ perforation, bleeding, vaginal scarring, neuromuscular alterations, LUTS (lower urinary tract symptoms), bowel complications and even immune disorders have been linked to mesh. Various tools, such as imaging, endoscopic and functional studies, are available for diagnosis of mesh complications. Since the spectrum of complications is wide, involvement of other specialties is usually beneficial in the diagnosis and management of these complications. There is still much to learn on the accuracy and utility of diagnostic studies in each type of complication. Evidence on the best diagnostic and treatment pathways for these complications is scarce but continuously growing as information is being reported, and we continue to gain expertise in dealing with patients affected by mesh. Treatment options include conservative and medical management initially and then open or minimally invasive surgical procedure approaches. This article will describe diagnostic and treatment pathways for mesh complications.

Evaluation of Change in Microhardness by Application of MI Varnish on Primary Tooth Enamel, Affected by Use of Frequently Prescribed Paediatric Syrups: An In Vitro Study

Introduction Dental erosion is considered as an irreversible progressive loss of tooth structure due to chemical dissolution by acids not of bacterial origin. Frequent intake of syrups can be an effective factor in tooth erosion when prescribed for illnesses. In the acidic environment, MI Varnish releases calcium, phosphate and fluoride from the covering layer and the teeth can be prevented from such acidic attacks from the erosive content of the syrups. Aim  To evaluate change in microhardness by application of MI Varnish on primary tooth enamel, affected by use of frequently prescribed paediatric syrups. Method  The effects of three paediatric syrups (Ibugesic Plus, Novamox, Becozinc H) and distilled water (control group) with different ingredients on primary tooth enamel were evaluated. Immersion cycles were applied three times a day for one minute. The measurements of the samples prepared were taken on 0 (baseline), third, fifthand seventh day. Microhardness was measured using a Vickers hardness tester. Then, those samples were coated with MI Varnish, and changes in microhardness were evaluated using the Vickers hardness tester after one week (14th day). The pH, titratable acidity and buffer capacity of the syrups were also evaluated. Results  There was a significant decrease in microhardness in all the syrups (p < 0.001) on days 3, 5, 7 and 14. Novamox syrup and distilled water (control group) were the least erosive on the primary tooth enamel and Becozinc H syrup being the most erosive on primary tooth enamel was seen. MI Varnish remineralized the enamel but not with any significant difference. Conclusion  In our findings, Novamox syrup showed the least erosion on primary tooth enamel compare to other syrups. Enamel microhardness was significantly reduced on all days after immersion in all syrups. Application of MI Varnish to enamel resisted erosion but was not significant. Paedodontists should be aware of the erosive potential of all the frequently prescribed syrups and stress on compliance with oral hygiene measures and application of varnishes releasing fluoride, calcium and phosphate on the tooth.

Prevalence of erosive tooth wear in Chilean adults, 2016: A cross-sectional study

OBJECTIVES

To determine the prevalence, severity and distribution of erosive tooth wear lesions in adult patients at the Universidad de los Andes Health Center in the San Bernardo Metropolitan Region, Chile, during a period of 4 months in 2016.

METHODS

A cross-sectional study was conducted. A consecutive sample of patients from 18 to 46 years old who were receiving care at the Universidad de los Andes Health Center during a period from September 2016 to January 2017 was analysed. Basic erosive wear examinations (BEWEs) were performed by two calibrated examiners.

RESULTS

A total of 535 adults were included in this study. An erosive tooth wear prevalence of 97.9% was found in which at least one surface had a BEWE score of 2 or 3 as the highest score (98.56% for females and 95.8% for males). In the sample, 75.70% and 74.77% of individuals had at least one surface with a BEWE score of 3 at the second and fifth sextant, respectively. The median of cumulative BEWE scores was 12. The median by individual of the affected percentage of tooth surfaces with BEWE scores 2 or 3 was 19.70%.

CONCLUSIONS

We found a high prevalence of erosive tooth wear, mainly in the anterior group of teeth. No differences were found between the sexes, but a positive correlation with age was found. The percentage of surfaces affected was low or moderate.

Peracetic acid as a single endodontic irrigant: effects on microhardness, roughness and erosion of root canal dentin

The aim was to assess the effects of 1% peracetic acid (PAA) as a single endodontic irrigant on microhardness, roughness, and erosion of root canal dentin, compared with 2.5% sodium hypochlorite (NaOCl) and with 2.5% NaOCl combined with 17% EDTA. Forty human, single-rooted tooth hemisections were submitted to Knoop microhardness test, before and after the following irrigation protocols: PAA = 1% PAA; NaOCl = 2.5% NaOCl; NaOCl-EDTA-NaOCl = 2.5% NaOCl +17% EDTA +2.5% NaOCl; and SS = saline. Another 40 roots were instrumented, irrigated with the same protocols, and sectioned longitudinally. The roughness analysis was performed on the mesial section using a confocal laser scanning microscope, whereas erosion was analyzed on each third of the distal section, using a scanning electron microscope. The data were analyzed using ANOVA and Tukey post-tests, and Kruskal-Wallis and Dunn post-tests (α = .05). The PAA and NaOCl-EDTA-NaOCl groups showed no significant differences (p > .05); both promoted reduction in microhardness and increase in roughness, compared with the NaOCl and SS groups (p < .05). NaOCl-EDTA-NaOCl promoted higher erosion in the cervical and middle thirds than the other groups (p < .05); there was no difference among PAA, NaOCl, and SS (p > .05). There was also no difference among the groups regarding the apical third (p > .05). PAA used as a single endodontic irrigant caused reduction in root canal dentin microhardness and increase in roughness in a similar way to NaOCl-EDTA-NaOCl; however, PAA caused less erosion than NaOCl-EDTA-NaOCl.