Acute and Chronic Citrulline Malate Supplementation on Muscle Contractile Properties and Fatigue Rate of the Quadriceps

This study compared the acute and chronic impact of citrulline malate (CM) supplementation on muscle contractile properties and fatigue rate of the quadriceps. Eighteen recreationally trained males consumed both a placebo (PL) and CM treatment for two separate dosing periods. The first experimental testing session for each dosing period was considered the baseline day, the second session the acute day, and the third session the chronic day, which followed seven consecutive days of supplementation. All testing sessions included exercising on a cycle ergometer at 50%-60% of their max power output for 30 min followed by performing the Thorstensson test on an isokinetic dynamometer. A two-way (Supplement × Time) analysis of variance with repeated measures resulted in no significant interactions (p > .05) (PL: baseline day, acute day, chronic day vs. CM: baseline day, acute day, chronic day) for peak power (in watts) (469 ± 81, 490 ± 97, 502 ± 99 vs. 464 ± 85, 480 ± 103, 501 ± 81); peak torque (in newton meters) (150 ± 26, 157 ± 32, 161 ± 31 vs. 149 ± 27, 156 ± 33, 161 ± 26); fatigue rate (in percentage) (57 ± 9, 57 ± 10, 58 ± 9 vs. 57 ± 10, 56 ± 9, 58 ± 9); and heart rate (in beats per minute) (156 ± 17, 146 ± 13, 146 ± 9 vs. 155 ± 11, 146 ± 11, 146 ± 9). The results of this study suggest that neither acute nor chronic supplementation of CM had an effect on recovery or fatigue rate of the quadriceps.

The Amot/integrin protein complex transmits mechanical forces required for vascular expansion

Vascular development is a complex multistep process involving the coordination of cellular functions such as migration, proliferation, and differentiation. How mechanical forces generated by cells and transmission of these physical forces control vascular development is poorly understood. Using an endothelial-specific genetic model in mice, we show that deletion of the scaffold protein Angiomotin (Amot) inhibits migration and expansion of the physiological and pathological vascular network. We further show that Amot is required for tip cell migration and the extension of cellular filopodia. Exploiting in vivo and in vitro molecular approaches, we show that Amot binds Talin and is essential for relaying forces between fibronectin and the cytoskeleton. Finally, we provide evidence that Amot is an important component of the endothelial integrin adhesome and propose that Amot integrates spatial cues from the extracellular matrix to form a functional vascular network.

Optical Fiber Array Sensor for Force Estimation and Localization in TAVI Procedure: Design, Modeling, Analysis and Validation

Transcatheter aortic valve implantation has shown superior clinical outcomes compared to open aortic valve replacement surgery. The loss of the natural sense of touch, inherited from its minimally invasive nature, could lead to misplacement of the valve in the aortic annulus. In this study, a cylindrical optical fiber sensor is proposed to be integrated with valve delivery catheters. The proposed sensor works based on intensity modulation principle and is capable of measuring and localizing lateral force. The proposed sensor was constituted of an array of optical fibers embedded on a rigid substrate and covered by a flexible shell. The optical fibers were modeled as Euler–Bernoulli beams with both-end fixed boundary conditions. To study the sensing principle, a parametric finite element model of the sensor with lateral point loads was developed and the deflection of the optical fibers, as the determinant of light intensity modulation was analyzed. Moreover, the sensor was fabricated, and a set of experiments were performed to study the performance of the sensor in lateral force measurement and localization. The results showed that the transmitted light intensity decreased up to 24% for an external force of 1 N. Additionally, the results showed the same trend between the simulation predictions and experimental results. The proposed sensor was sensitive to the magnitude and position of the external force which shows its capability for lateral force measurement and localization.

Premovement inhibition can protect motor actions from interference by response-irrelevant sensory stimulation

KEY POINTS

Suppression of corticospinal excitability is reliably observed during preparation for a range of motor actions, leading to the belief that this preparatory inhibition is a physiologically obligatory component of motor preparation. The neurophysiological function of this suppression is uncertain. We restricted the time available for participants to engage in preparation and found no evidence for preparatory inhibition. The function of preparatory inhibition can be inferred from our findings that sensory stimulation can disrupt motor output in the absence of preparatory inhibition, but enhance motor output when inhibition is present. These findings suggest preparatory inhibition may be a strategic process which acts to protect prepared actions from external interference. Our findings have significant theoretical implications for preparatory processes. Findings may also have a pragmatic benefit in that acoustic stimulation could be used therapeutically to facilitate movement, but only if the action can be prepared well in advance.

ABSTRACT

Shortly before movement initiation, the corticospinal system undergoes a transient suppression. This phenomenon has been observed across a range of motor tasks, suggesting that it may be an obligatory component of movement preparation. We probed whether this was also the case when the urgency to perform a motor action was high, in a situation where little time was available to engage in preparatory processes. We controlled the urgency of an impending motor action by increasing or decreasing the foreperiod duration in an anticipatory timing task. Transcranial magnetic stimulation (TMS; experiment 1) or a loud acoustic stimulus (LAS; experiment 2) were used to examine how corticospinal and subcortical excitability were modulated during motor preparation. Preparatory inhibition of the corticospinal tract was absent when movement urgency was high, though motor actions were initiated on time. In contrast, subcortical circuits were progressively inhibited as the time to prepare increased. Interestingly, movement force and vigour were reduced by both TMS and the LAS when movement urgency was high, and enhanced when movement urgency was low. These findings indicate that preparatory inhibition may not be an obligatory component of motor preparation. The behavioural effects we observed in the absence of preparatory inhibition were induced by both TMS and the LAS, suggesting that accessory sensory stimulation may disrupt motor output when such stimulation is presented in the absence of preparatory inhibition. We conclude that preparatory inhibition may be an adaptive strategy which can serve to protect the prepared motor action from external interference.

The Matter of Time

About a century ago, in the spirit of ancient atomism, the quantum of light was renamed the photon to suggest that it is the fundamental element of everything. Since the photon carries energy in its period of time, a flux of photons inexorably embodies a flow of time. Thus, time comprises periods as a trek comprises legs. The flows of quanta naturally select optimal paths (i.e., geodesics) to level out energy differences in the least amount of time. The corresponding flow equations can be written, but they cannot be solved. Since the flows affect their driving forces, affecting the flows, and so on, the forces (i.e., causes) and changes in motions (i.e., consequences) are inseparable. Thus, the future remains unpredictable. However, it is not all arbitrary but rather bounded by free energy. Eventually, when the system has attained a stationary state where forces tally, there are no causes and no consequences. Since there are no energy differences between the system and its surroundings, the quanta only orbit on and on. Thus, time does not move forward either but circulates.

Skeletal muscle-specific calpastatin overexpression mitigates muscle weakness in aging and extends life span

Calpain activation has been postulated as a potential contributor to the loss of muscle mass and function associated with both aging and disease, but limitations of previous experimental approaches have failed to completely examine this issue. We hypothesized that mice overexpressing calpastatin (CalpOX), an endogenous inhibitor of calpain, solely in skeletal muscle would show an amelioration of the aging muscle phenotype. We assessed four groups of mice (age in months): 1) young wild type (WT; 5.71 ± 0.43), 2) young CalpOX (5.6 ± 0.5), 3) old WT (25.81 ± 0.56), and 4) old CalpOX (25.91 ± 0.60) for diaphragm and limb muscle (extensor digitorum longus, EDL) force frequency relations. Aging significantly reduced diaphragm and EDL peak force in old WT mice, and decreased the force-time integral during a fatiguing protocol by 48% and 23% in aged WT diaphragm and EDL, respectively. In contrast, we found that CalpOX mice had significantly increased diaphragm and EDL peak force in old mice, similar to that observed in young mice. The impact of aging on the force-time integral during a fatiguing protocol was abolished in the diaphragm and EDL of old CalpOX animals. Surprisingly, we found that CalpOX had a significant impact on longevity, increasing median survival from 20.55 mo in WT mice to 24 mo in CalpOX mice (P = 0.0006).NEW & NOTEWORTHY This is the first study to investigate the role of calpastatin overexpression on skeletal muscle specific force in aging rodents. Muscle-specific overexpression of calpastatin, the endogenous calpain inhibitor, prevented aging-induced reductions in both EDL and diaphragm specific force and, remarkably, increased life span. These data suggest that diaphragm dysfunction in aging may be a major factor in determining longevity. Targeting the calpain/calpastatin pathway may elucidate novel therapies to combat skeletal muscle weakness in aging.

Influence of age and maturation status on sprint acceleration characteristics in junior Australian football

This study aimed to investigate the influence of chronological age and maturation status on sprint acceleration characteristics in junior Australian football (AF) players. Biological maturity of 109 subjects was assessed and subjects were grouped according to predicted years from peak height velocity (PHV) (pre-, mid-, and post-PHV) and chronological age (13 years, 14 years, and 15 years). A one-way multivariate analysis of variance and magnitude-based decisions were used to determine between-group differences. Instantaneous velocity was measured during two maximal 30m sprints via radar gun with the velocity-time data used to derive the force, velocity, and power characteristics. Chronologically, the greatest differences were observed between the 13 and 14 year old groups with the latter group producing likely greater relative maximum power (Pmax) (ES[effect size]=0.44) and theoretical maximal velocity (V0) (ES=0.49). The post-PHV group likely demonstrated a greater ability to apply force at faster velocity (V0; ES=0.59) and orient the force in a horizontal direction (Drf%; ES=-0.49) than the mid-PHV group. No differences in relative theoretical maximal force (F0) were observed between groups. Considering the findings, practitioners should aim to improve relative lower limb strength through heavy sled push or sled pulls and traditional strength training exercises to improve relative F0.

Quantification of Inter-Limb Symmetries With Rate of Force Development and Relaxation Scaling Factor

The inter-limb (a)symmetries have been most often assessed with the tests that quantify the maximal muscle capacity. However, the rapid force production and relaxation during submaximal tasks is equally important for successful sports performance. This can be evaluated with an established rate of force development and relaxation scaling factor (RFD-SF/RFR-SF). The aims of our study were (1) to assess the intra-session reliability of shortened RFD-SF/RFR-SF protocol and its absolute and symmetry outcome measures, (2) to compare the main absolute RFD-SF/RFR-SF outcome measures (slopes of RFD-SF and RFR-SF: kRTD-SF and kRFR-SF, theoretical peak RFD/RFR: TPRFD and TPRFR) across gender and sports groups, and (3) to compare inter-limb symmetries across gender and sports groups for main outcome measures (kRFD-SF, kRFR-SF, TPRFD, and TPRFR). A cross-sectional study was conducted on a group of young health participants (basketball and tennis players, and students): 30 in the reliability study and 248 in the comparison study. Our results showed good to excellent relative and excellent absolute reliability for the selected absolute and symmetry outcome measures (kRFD-SF, kRFR-SF, TPRFD, and TPRFR). We found significantly higher absolute values for kRFD-SF and TPRFD in males compared to females for the preferred (kRFD-SF: 9.1 ± 0.9 vs. 8.6 ± 0.9/s) and the non-preferred leg (kRFD-SF: 9.1 ± 0.9 vs. 8.5 ± 0.8/s), while there was no effect of sport. Significantly lower symmetry values for kRFR-SF (88.4 ± 8.6 vs. 90.4 ± 8.0%) and TPRFR (90.9 ± 6.8 vs. 92.5 ± 6.0%) were found in males compared to females. Moreover, tennis players had significantly higher symmetry values for kRFR-SF (91.1 ± 7.7%) and TPRFR (93.1 ± 6.0%) compared to basketball players (kRFR-SF: 88.4 ± 8.7% and TPRFR: 90.9 ± 6.7%) and students (kRFR-SF: 87.6 ± 8.7% and TPRFR: 90.5 ± 6.7%). Our results suggest that the reduced RFD-SF/RFR-SF protocol is a valuable and useful tool for inter-limb (a)symmetry evaluation. Differences in symmetry values in kRFR-SF and TPRFR (relaxation phase) were found between different sports groups. These may be explained by different mechanisms underlying the muscle contraction and relaxation. We suggest that muscle contraction and relaxation should be assessed for in-depth inter-limb symmetry investigation.

Resonance in Atomic-Scale Sliding Friction

Friction represents a major energy dissipation mode, yet the atomistic mechanism of how friction converts mechanical motion into heat remains elusive. It has been suggested that excess phonons are mainly excited at the washboard frequency, the fundamental frequency at which relative motion excites the interface atoms, and the subsequent thermalization of these nonequilibrium phonons completes the energy dissipation process. Through combined atomic force microscopy measurements and atomistic modeling, here we show that the nonlinear interactions between a sliding tip and the substrate can generate excess phonons at not only the washboard frequency but also its harmonics. These nonequilibrium phonons can induce resonant vibration of the tip and lead to multiple peaks in the friction force as the tip sliding velocity ramps up. These observations disclose previously unrecognized energy dissipation channels associated with tip vibration and provide insights into engineering friction force through adjusting the resonant frequency of the tip-substrate system.

Burrowing in blindsnakes: A preliminary analysis of burrowing forces and consequences for the evolution of morphology

Burrowing is a common behavior in vertebrates. An underground life-style offers many advantages but also poses important challenges including the high energetic cost of burrowing. Scolecophidians are a group of morphologically derived subterranean snakes that show great diversity in form and function. Although it has been suggested that leptotyphlopids and anomalepidids mostly use existing underground passageways, typhlopids are thought to create their own burrows. However, the mechanisms used to create burrows and the associated forces that animals may be able to generate remain unknown. Here, we provide the first data on push forces in scolecophidians and compare them with those in some burrowing alethinophidian snakes. Our results show that typhlopids are capable of generating higher forces for a given size than other snakes. The observed differences are not due to variation in body diameter or length, suggesting fundamental differences in the mechanics of burrowing or the way in which axial muscles are used. Qualitative observations of skull and vertebral shape suggest that the higher forces exerted by typhlopids may have impacted the evolution of their anatomy. Our results provide the basis for future studies exploring the diversity of form and function in this fascinating group of animals. Quantitative comparisons of the cranial and vertebral shape in addition to collecting functional and ecological data on a wider array of species would be particularly important to test the patterns described here.

Drop jump neuromuscular performance qualities associated with maximal horizontal deceleration ability in team sport athletes

The purpose of this study was to investigate associations between, and within, drop jump (DJ) neuromuscular performance (NMP) qualities and maximal horizontal deceleration ability. We also compared DJ NMP qualities in "high" versus "low" horizontal deceleration ability athletes. Twenty-nine university athletes performed: (1) DJs on force plates from 20 (DJ20) and 40 cm (DJ40) heights and (2) maximal horizontal deceleration, measured using radar, following a 20 m acceleration. Maximal horizontal deceleration was evaluated using deceleration (HDEC; m·s^-2), across the entire deceleration phase and during early and late deceleration sub-phases. Of the DJ variables assessed, DJ20 and DJ40 reactive strength index (RSI) and concentric mean force had the largest correlations with HDEC (r = -0.54 to -0.61) and the largest differences between high and low HDEC groups (d = 1.20 to 1.40). These correlations were stronger with the early than late HDEC sub-phase (r = -0.54 to -0.66 vs. r = -0.24 to -0.40). Notably, eccentric mean force in DJ40 had large correlations with both DJ20 and DJ40 concentric mean force (r = 0.67 to 0.77), whereas at DJ20 these correlations were small (r = 0.22 to 0.40). Similarly, DJ40 eccentric mean force had a much larger difference between the high and low HDEC groups than DJ20 (d = 1.11 vs. 0.51). These findings suggest DJ RSI from either height may be used as a proxy for HDEC ability, while DJ kinetic analyses should use a higher height to distinguish those with a better capacity to generate eccentric braking forces under increased eccentric loading demands.HIGHLIGHTS Players with greater drop jump reactive strength index (RSI) demonstrated superior horizontal deceleration ability.Drop jump RSI had a greater association with the early compared to the late horizontal deceleration sub-phase.Of the drop jump kinetic variables examined, concentric mean force had the largest associations with horizontal deceleration ability.

Sprint Mechanical Characteristics of Female Soccer Players: A Retrospective Pilot Study to Examine a Novel Approach for Correction of Timing Gate Starts

The purpose of this study was to compare model estimates of linear sprint mechanical characteristics using timing gates with and without time correction. High-level female soccer players (n = 116) were evaluated on a 35-m linear sprint with splits at 5, 10, 20, 30, and 35 m. A mono-exponential function was used to model sprint mechanical metrics in three ways: without a time correction, with a fixed (+0.3 s) time correction, and with an estimated time correction. Separate repeated-measures ANOVAs compared the sprint parameter estimates between models and also the residuals between models. Differences were identified between all modeled sprint mechanical metrics; however, comparable estimates to the literature occurred when either time correction was used. Bias for both time-corrected models was reduced across all sprint distances compared to the uncorrected model. This study confirms that a time correction is warranted when using timing gates at the start line to model sprint mechanical metrics. However, determining whether fixed or estimated time corrections provide greater accuracy requires further investigation.

A Magnetic Food Texture Sensor and Comparison of the Measurement Data of Chicken Nuggets

Food texture is one of the important quality indicators in foodstuffs, along with appearance and flavor, contributing to taste and odor. This study proposes a novel magnetic food texture sensor that corresponds to the tactile sensory capacity of the human tooth. The sensor primarily consists of a probe, linear slider, spring, and circuit board. The probe has a cylindrical shape and includes a permanent magnet. Both sides of the spring are fixed to the probe and circuit board. The linear slider enables the smooth, single-axis motion of the probe during food compression. Two magnetoresistive elements and one inductor on the circuit board measured the probe’s motion. A measurement system then translates the measurement data collected by the magnetoresistive elements into compression force by means of a calibration equation. Fundamental experiments were performed to evaluate the range, resolution, repetitive durability of force, and differences in the frequency responses. Furthermore, the sensor was used to measure seven types of chicken nuggets with different coatings. The difference between the force and vibration measurement data is revealed on the basis of the discrimination rate of the nuggets.

Estimation of maximal muscle electromyographic activity from the relationship between muscle activity and voluntary activation

Maximal muscle activity recorded with surface electromyography (EMG) is an important neurophysiological measure. It is frequently used to normalize EMG activity recorded during passive or active movement. However, the true maximal muscle activity cannot be determined in people with impaired capacity to voluntarily activate their muscles. Here, we determined whether maximal muscle activity can be estimated from muscle activity produced during submaximal voluntary activation. Twenty-five able-bodied adults (18 males, mean age 29 yr, range 19-64 yr) participated in the study. Participants were seated with the knee flexed 90° and the ankle in 5° of dorsiflexion from neutral. Participants performed isometric voluntary ankle plantarflexion contractions at target torques, in random order: 1, 5, 10, 15, 25, 50, 75, 90, 95, and 100% of maximal voluntary torque. Ankle torque, muscle activity in soleus, medial and lateral gastrocnemius muscles, and voluntary muscle activation determined using twitch interpolation were recorded. There was a strong log_e-linear relationship between measures of muscle activation and muscle activity in all three muscles tested. Linear mixed models were fitted to muscle activation and log_e-transformed EMG data. Each 1% increase in muscle activation increased muscle activity by a mean of 0.027 ln(mV) [95% confidence interval (CI) 0.025 to 0.029 ln(mV)] in soleus, 0.025 ln(mV) [0.022 to 0.028 ln(mV)] in medial gastrocnemius, and 0.028 ln(mV) [0.026 to 0.030 ln(mV)] in lateral gastrocnemius. The relationship between voluntary muscle activation and muscle activity can be described with simple mathematical functions. In future, it should be possible to normalize recorded muscle activity using these types of functions.NEW & NOTEWORTHY Muscle activity is often normalized to maximal muscle activity; however, it is difficult to obtain accurate measures of maximal muscle activity in people with impaired voluntary neural drive. We determined the relationship between voluntary muscle activation and plantarflexor muscle activity across a broad range of muscle activation values in able-bodied people. The relationship between voluntary muscle activation and muscle activity can be described with simple mathematical functions capable of estimating maximal muscle activity.

Orthograde signal of dihydropyridine receptor increases Ca2+ leakage after repeated contractions in rat fast-twitch muscles in vivo

The purpose of this study was to investigate the mechanism underlying sarcoplasmic reticulum (SR) Ca2+ leakage after in vivo contractions. Rat gastrocnemius muscles were electrically stimulated in vivo, and then mechanically skinned fibers and SR microsomes were prepared from the muscles excised 30 min after repeated high-intensity contractions. The mechanically skinned fibers maintained the interaction between dihydropyridine receptors (DHPRs) and ryanodine receptors (RyRs), whereas the SR microsomes did not. Interestingly, skinned fibers from the stimulated muscles showed increased SR Ca2+ leakage, whereas Ca2+ leakage decreased in SR microsomes from the stimulated muscles. To enhance the orthograde signal of DHPRs, SR Ca2+ leakage in the skinned fiber was measured 1) under a continuously depolarized condition and 2) in the presence of nifedipine. As a result, in either of the two conditions, SR Ca2+ leakage in the rested fibers reached a level similar to that in the stimulated fibers. Furthermore, the increased SR Ca2+ leakage from the stimulated fibers was alleviated by treatment with 1 mM tetracaine (Tet) but not by treatment with 3 mM free Mg2+ (3 Mg). Tet exerted a greater inhibitory effect on the DHPR signal to RyR than 3 Mg, although their inhibitory effects on RyR were almost similar. These results suggest that the increased Ca2+ leakage after muscle contractions is mainly caused by the orthograde signal of DHPRs to RyRs.

Is the Focal Muscle Vibration an Effective Motor Conditioning Intervention? A Systematic Review

Mechanical vibration, applied to single or few muscles, can be a selective stimulus for muscle spindles, able to modify neuromuscular management, inducing short and long-term effects, are now mainly employed in clinic studies. Several studies reported as treatments with focal vibratory (FVT) can influence neuromuscular parameters also in healthy people. However, the application modalities and the consequent effects are remarkably fragmented. This paper aims to review these studies and to characterize the FVT effectiveness on long-term conditional capacities in relation to FVT characteristics. A systematic search of studies published from 1985 to 2020 in English on healthcare databases was performed. Articles had to meet the following criteria: (1) treatment based on a locally applied vibration on muscle belly or tendon; (2) healthy adults involved; (3) outcomes time analysis enduring for more than 24 h. Twelve studies were found, all of them presented an excellent quality score of ≥75%. All selected papers reported positive changes, comparable with traditional long-lasting training effects. Muscle force and power were the most investigated parameters. The after-effects persisted for up to several months. Among the different FV administration modalities, the most effective seems to show a stimulus frequency of ≈100 Hz, repeated more times within three-five days on a voluntary contracted muscle.

Blood Oxygenation Level-Dependent Response to Multiple Grip Forces in Multiple Sclerosis: Going Beyond the Main Effect of Movement in Brodmann Area 4a and 4p

This study highlights the importance of looking beyond the main effect of movement to study alterations in functional response in the presence of central nervous system pathologies such as multiple sclerosis (MS). Data show that MS selectively affects regional BOLD (blood oxygenation level dependent) responses to variable grip forces (GF). It is known that the anterior and posterior BA 4 areas (BA 4a and BA 4p) are anatomically and functionally distinct. It has also been shown in healthy volunteers that there are linear (first order, typical of BA 4a) and nonlinear (second to fourth order, typical of BA 4p) BOLD responses to different levels of GF applied during a dynamic motor paradigm. After modeling the BOLD response with a polynomial expansion of the applied GFs, the particular case of BA 4a and BA 4p were investigated in healthy volunteers (HV) and MS subjects. The main effect of movement (zeroth order) analysis showed that the BOLD signal is greater in MS compared with healthy volunteers within both BA 4 subregions. At higher order, BOLD-GF responses were similar in BA 4a but showed a marked alteration in BA 4p of MS subjects, with those with greatest disability showing the greatest deviations from the healthy response profile. Therefore, the different behaviors in HV and MS could only be uncovered through a polynomial analysis looking beyond the main effect of movement into the two BA 4 subregions. Future studies will investigate the source of this pathophysiology, combining the present fMRI paradigm with blood perfusion and nonlinear neuronal response analysis.

Tapping Force Encodes Metrical Aspects of Rhythm

Humans possess the ability to extract highly organized perceptual structures from sequences of temporal stimuli. For instance, we can organize specific rhythmical patterns into hierarchical, or metrical, systems. Despite the evidence of a fundamental influence of the motor system in achieving this skill, few studies have attempted to investigate the organization of our motor representation of rhythm. To this aim, we studied-in musicians and non-musicians-the ability to perceive and reproduce different rhythms. In a first experiment participants performed a temporal order-judgment task, for rhythmical sequences presented via auditory or tactile modality. In a second experiment, they were asked to reproduce the same rhythmic sequences, while their tapping force and timing were recorded. We demonstrate that tapping force encodes the metrical aspect of the rhythm, and the strength of the coding correlates with the individual's perceptual accuracy. We suggest that the similarity between perception and tapping-force organization indicates a common representation of rhythm, shared between the perceptual and motor systems.

Escherichia coli Swimming back Toward Stiffer Polyetheylene Glycol Coatings, Increasing Contact in Flow

Bacterial swimming in flow near surfaces is critical to the spread of infection and device colonization. Understanding how material properties affect flagella- and motility-dependent bacteria-surface interactions is a first step in designing new medical devices that mitigate the risk of infection. We report that, on biomaterial coatings such as polyethylene glycol (PEG) hydrogels and end-tethered layers that prevent adhesive bacteria accumulation, the coating mechanics and hydration control the near-surface travel and dynamic surface contact of E. coli cells in gentle shear flow (order 10 s-1). Along relatively stiff (order 1 MPa) PEG hydrogels or end-tethered layers of PEG chains of similar polymer correlation length, run-and-tumble E. coli travel nanometrically close to the coating's surface in the flow direction in distinguishable runs or "engagements" that persist for several seconds, after which cells leave the interface. The duration of these engagements was greater along stiff hydrogels and end-tethered layers compared with softer, more-hydrated hydrogels. Swimming cells that left stiff hydrogels or end-tethered layers proceeded out to distances of a few microns and then returned to engage the surface again and again, while cells engaging the soft hydrogel tended not to return after leaving. As a result of differences in the duration of engagements and tendency to return to stiff hydrogel and end-tethered layers, swimming E. coli experienced 3 times the integrated dynamic surface contact with stiff coatings compared with softer hydrogels. The striking similarity of swimming behaviors near 16-nm-thick end-tethered layers and 100-μm-thick stiff hydrogels argues that only the outermost several nanometers of a highly hydrated coating influence cell travel. The range of material stiffnesses, cell-surface distance during travel, and time scales of travel compared with run-and-tumble time scales suggests the influence of the coating derives from its interactions with flagella and its potential to alter flagellar bundling. Given that restriction of flagellar rotation is known to trigger increased virulence, bacteria influenced by surfaces in one region may become predisposed to form a biofilm downstream.

Cutting force measurement: Hand tool instrumentation used in slaughterhouses - a systematic review

Workers' intensive use of hand tool cutting in the meat packing industry is a risk factor for occupational health, mainly by mechanical compression of tissues in the upper limbs, which can cause Work-Related Musculoskeletal Disorders (WMSDs). This systematic review aimed to identify the characteristics and measured variables of instrumented knives and determine how they should be designed. The review process and article extractions occurred through an analysis of the (article) titles, keywords and abstracts, followed by reading the full texts by two reviewers independently. Searches were conducted in Medline, Web of Science, Science Direct, Scopus, Ebsco and Engineering Village for articles published in peer-reviewed journals from January 2000 to March 2019, in the English language. The result of (the) search included 1289 potentially eligible studies, with 894 duplicated/triplicated/quadruplicated articles that were excluded, resulting in 404 remaining articles of which 33 were considered eligible, with 36 additional articles, totaling 69 evaluated full texts. After the review, none of the 14 analyzed studies, were rated as having good methodological quality. In addition, four types of instrumented knives were used. Data acquisition was performed in both laboratory and meat processing plants. It is noteworthy that only one knife was submitted to a validation process and that the articles did not provide complete technical information about the knives. The result demonstrated that the cutting force varies within and between subjects, tasks, plants and blade finishings. All knives used some type of electrical connection via cable or wires. Of the articles found, none considered the influences that the workers are subject to when they do not use the same tool daily for data acquisition. Therefore, the development of different types of instrumented knives, with wireless data transmission and more rigorous studies are necessary to expand the knowledge of the cutting force and development of WMSD in slaughterhouse workers who perform meat cutting.

Comparative evaluation of frictional resistance of extracoronal attachments of different designs and lengths in fixed partial denture: A finite element analysis

Aim:

The purpose of the study was to evaluate the frictional resistance and the vertical force required to achieve the frictional resistance for different length and designs of extracoronal attachments used in fixed partial denture (FPD).

Setting and Design:

Finite element analysis.

Materials and Methods:

Four different designs and five different lengths (3 mm, 3.5 mm, 4 mm, 4.5 mm, and 5 mm) of extracoronal attachments for FPD were selected from different manufacturers. Three-dimensional models of all the samples were simulated using Catia V5 software. The properties were incorporated to the software to simulate the clinical conditions. The frictional resistance and the vertical force required to achieve frictional resistance were analyzed using ANSYS workbench 15.0 finite element software.

Statistical Analysis Used:

ANOVA and Tukey's post hoc test.

Results:

The mean microhardness of the Variolink N resin cements were significantly higher than Panavia SA ones (P < 0.001). Variolink N cements exhibited lower sorption/solubility than Panavia SA resin cements (P < 0.05). The ceramic shade had a significant influence on the microhardness of both cements (P < 0.001) but had no significant effect on the sorption/solubility of resin cements (P > 0.05).

Conclusion:

Interposition of monolithic zirconia decreases the microhardness of resin cement especially Panavia SA. The microhardness decreased in Variolink N with the increase in the chroma saturation of ceramics. However, in Panavia SA, it was altered by the shades. For both cements, there were no statistical differences between the sorption/solubility. There was a reverse correlation between microhardness and water sorption/solubility of both cements.

Dynamical EEG Indices of Progressive Motor Inhibition and Error-Monitoring

Response inhibition has been widely explored using the stop signal paradigm in the laboratory setting. However, the mechanism that demarcates attentional capture from the motor inhibition process is still unclear. Error monitoring is also involved in the stop signal task. Error responses that do not complete, i.e., partial errors, may require different error monitoring mechanisms relative to an overt error. Thus, in this study, we included a “continue go” (Cont_Go) condition to the stop signal task to investigate the inhibitory control process. To establish the finer difference in error processing (partial vs. full unsuccessful stop (USST)), a grip-force device was used in tandem with electroencephalographic (EEG), and the time-frequency characteristics were computed with Hilbert–Huang transform (HHT). Relative to Cont_Go, HHT results reveal (1) an increased beta and low gamma power for successful stop trials, indicating an electrophysiological index of inhibitory control, (2) an enhanced theta and alpha power for full USST trials that may mirror error processing. Additionally, the higher theta and alpha power observed in partial over full USST trials around 100 ms before the response onset, indicating the early detection of error and the corresponding correction process. Together, this study extends our understanding of the finer motor inhibition control and its dynamic electrophysiological mechanisms.

Quantitative Methodologies to Dissect Immune Cell Mechanobiology

Mechanobiology seeks to understand how cells integrate their biomechanics into their function and behavior. Unravelling the mechanisms underlying these mechanobiological processes is particularly important for immune cells in the context of the dynamic and complex tissue microenvironment. However, it remains largely unknown how cellular mechanical force generation and mechanical properties are regulated and integrated by immune cells, primarily due to a profound lack of technologies with sufficient sensitivity to quantify immune cell mechanics. In this review, we discuss the biological significance of mechanics for immune cells across length and time scales, and highlight several experimental methodologies for quantifying the mechanics of immune cells. Finally, we discuss the importance of quantifying the appropriate mechanical readout to accelerate insights into the mechanobiology of the immune response.

Adaptability in Swimming Pattern: How Propulsive Action Is Modified as a Function of Speed and Skill

The objectives of this study were to identify how spatiotemporal, kinetic, and kinematic parameters could (i) characterize swimmers' adaptability to different swimming speeds and (ii) discriminate expertise level among swimmers. Twenty male participants, grouped into (a) low-, (b) medium-, and (c) high-expertise levels, swam at four different swim paces of 70, 80, 90% (for 20 s), and 100% (for 10 s) of their maximal speed in a swimming flume. We hypothesized that (i) to swim faster, swimmers increase both propulsion time and the overall force impulse during a swimming cycle; (ii) in the frequency domain, expert swimmers are able to maintain the relative contribution of the main harmonics to the overall force spectrum. We used three underwater video cameras to derive stroking parameters [stroke rate (SR), stroke length (SL), stroke index (SI)]. Force sensors placed on the hands were used to compute kinetic parameters, in conjunction with video data. Parametric statistics examined speed and expertise effects. Results showed that swimmers shared similarities across expertise levels to increase swim speed: SR, the percentage of time devoted to propulsion within a cycle, and the index of coordination (IdC) increased significantly. In contrast, the force impulse (I ⁺) generated by the hand during propulsion remained constant. Only the high-expertise group showed modification in the spectral content of its force distribution at high SR. Examination of stroking parameters showed that only high-expertise swimmers exhibited higher values of both SL and SI and that the low- and high-expertise groups exhibited similar IdC and even higher magnitude in I ⁺. In conclusion, all swimmers exhibit adaptable behavior to change swim pace when required. However, high-skilled swimming is characterized by broader functional adaptation in force parameters.