Fully Printed All-Solid-State Organic Flexible Artificial Synapse for Neuromorphic Computing

Nonvolatile, flexible artificial synapses that can be used for brain-inspired computing are highly desirable for emerging applications such as human-machine interfaces, soft robotics, medical implants, and biological studies. Printed devices based on organic materials are very promising for these applications due to their sensitivity to ion injection, intrinsic printability, biocompatibility, and great potential for flexible/stretchable electronics. Herein, we report the experimental realization of a nonvolatile artificial synapse using organic polymers in a scalable fabrication process. The three-terminal electrochemical neuromorphic device successfully emulates the key features of biological synapses: long-term potentiation/depression, spike timing-dependent plasticity learning rule, paired-pulse facilitation, and ultralow energy consumption. The artificial synapse network exhibits an excellent endurance against bending tests and enables a direct emulation of logic gates, which shows the feasibility of using them in futuristic hierarchical neural networks. Based on our demonstration of 100 distinct, nonvolatile conductance states, we achieved a high accuracy in pattern recognition and face classification neural network simulations.

Poly(dithiazolfluorene- alt-selenadiazolobenzotriazole)-Based Blue-Light Photodetector and Its Application in Visible-Light Communication

Conjugated polymers have attracted broad interest from synthetic chemists and device developers in optoelectronic fields. In this study, we report a blue-light organic photodetector (OPD) based on our low-band and ambipolar PSeN polymer. Besides high stability, the device has excellent color-selective property in the visible-light region. At the bias of -3 V, the ratio of the external quantum efficiency (EQE) in blue to red is more than 10:1. Meanwhile, the device also shows very low dark current density of ∼21 nA/cm² and high EQE more than 100% for blue light at the bias of -3 V. Then, the mechanism of the high EQE in single-sensitive layer structure devices is analyzed by considering the activation energy of traps and carrier injection. Furthermore, for portable purposes, a flexible blue-light OPD is designed. This OPD shows a great orthogonal light response to blue and orange contents in a white light source and will be a potential candidate in a two-channel visible-light communication system.

Alternating Tetrafluorobenzene and Thiophene Units by Direct Arylation for Organic Electronics

Direct arylation represents an attractive alternative to the conventional cross-coupling methods because of its step-economic and eco-friendly advantages. A set of simple D-A oligomeric molecules (F-3, F-5, and F-7) by integrating thiophene (T) and tetrafluorobenzene (F4B) as alternating units through a direct arylation strategy is presented to obtain high-performance charge-transporting materials. Single-crystal analysis revealed their herringbone packing arrangements driven by intensive C-H⋅⋅⋅π interactions. An excellent hole-transporting efficiency based on single-crystalline micro-plates/ribbons was witnessed, and larger π-conjugation and D-A constitution gave higher mobilities. Consequently, an average mobility of 1.31 cm²  V^-1  s^-1 and a maximum mobility of 2.44 cm²  V^-1  s^-1 for F-7 were achieved, providing an effective way to obtain high-performance materials by designing simple D-A oligomeric systems.

An Evolvable Organic Electrochemical Transistor for Neuromorphic Applications

An evolvable organic electrochemical transistor (OECT), operating in the hybrid accumulation-depletion mode is reported, which exhibits short-term and long-term memory functionalities. The transistor channel, formed by an electropolymerized conducting polymer, can be formed, modulated, and obliterated in situ and under operation. Enduring changes in channel conductance, analogous to long-term potentiation and depression, are attained by electropolymerization and electrochemical overoxidation of the channel material, respectively. Transient changes in channel conductance, analogous to short-term potentiation and depression, are accomplished by inducing nonequilibrium doping states within the transistor channel. By manipulating the input signal, the strength of the transistor response to a given stimulus can be modulated within a range that spans several orders of magnitude, producing behavior that is directly comparable to short- and long-term neuroplasticity. The evolvable transistor is further incorporated into a simple circuit that mimics classical conditioning. It is forecasted that OECTs that can be physically and electronically modulated under operation will bring about a new paradigm of machine learning based on evolvable organic electronics.

High-Performance All-Polymer Solar Cells Enabled by an n-Type Polymer Based on a Fluorinated Imide-Functionalized Arene

A novel imide-functionalized arene, di(fluorothienyl)thienothiophene diimide (f-FBTI2), featuring a fused backbone functionalized with electron-withdrawing F atoms, is designed, and the synthetic challenges associated with highly electron-deficient fluorinated imide are overcome. The incorporation of f-FBTI2 into polymer affords a high-performance n-type semiconductor f-FBTI2-T, which shows a reduced bandgap and lower-lying lowest unoccupied molecular orbital (LUMO) energy level than the polymer analog without F or with F-functionalization on the donor moiety. These optoelectronic properties reflect the distinctive advantages of fluorination of electron-deficient acceptors, yielding "stronger acceptors," which are desirable for n-type polymers. When used as a polymer acceptor in all-polymer solar cells, an excellent power conversion efficiency of 8.1% is achieved without any solvent additive or thermal treatment, which is the highest value reported for all-polymer solar cells except well-studied naphthalene diimide and perylene diimide-based n-type polymers. In addition, the solar cells show an energy loss of 0.53 eV, the smallest value reported to date for all-polymer solar cells with efficiency > 8%. These results demonstrate that fluorination of imide-functionalized arenes offers an effective approach for developing new electron-deficient building blocks with improved optoelectronic properties, and the emergence of f-FBTI2 will change the scenario in terms of developing n-type polymers for high-performance all-polymer solar cells.

Facile Synthesis of a 3,4-Ethylene-Dioxythiophene (EDOT) Derivative for Ease of Bio-Functionalization of the Conducting Polymer PEDOT

In the pursuit of conducting polymer based bio-functional devices, a cost-effective and high yield synthesis method for a versatile monomer is desired. We report here a new synthesis strategy for a versatile monomer 2-methylene-2,3-dihydrothieno (3,4-b) (1,4) dioxine, or 3,4-ethylenedioxythiophene with a exomethylene side group (EDOT-EM). Compared to the previously reported synthesis route, the new strategy uses less steps, with faster reaction rate, and higher yield. The presence of EM group opens up endless possibility for derivatization via either hydro-alkoxy addition or thiol-ene click chemistry. EDOT-EM could be polymerized into stable and low impedance PEDOT-EM polymer using electro-polymerization method on different conducting substrates at both macro and micro scales. Facile post-functionalization of PEDOT-EM with molecules of varying size and functionality (from small molecules to DNAs and proteins) was achieved. The new synthetic route of EDOT-EM and the ease of post-functionalization of PEDOT-EM will greatly accelerate the use of conducting polymer in a broad range of organic electronics and bioelectronics applications.

One-Step Fabrication of Bio-Compatible Coordination Complex Film on Diverse Substrates for Ternary Flexible Memory

Recently, resistance random access memories (RRAMs) have been studied extensively, because the demand for information storage is increasing. However, it remains challenging to obtain a flexible device because the active materials involved need to be nontoxic, nonpolluting, distortion-tolerable, and biodegradable as well adhesive to diverse flexible substrates. In this paper, tannic acid (TA) and an iron ion (Fe^III ) coordination complex were employed as the active layer in a sandwich-like (Al/active layer/substrate) device to achieve memory performance. A nontoxic, biocompatible TA-Fe^III coordination complex was synthesized by a one-step self-assembly solution method. The retention time of the TA-Fe^III memory performance was up to 15 000 s, the yield up to 53 %. Furthermore, the TA-Fe^III coordination complex can form a high-quality film and shows stable ternary memory behavior on various flexible substrates, such as polyethylene terephthalate (PET), polyimide (PI), printer paper, and leaf. The device can be degraded by immersing it in vinegar solution. Our work will broaden the application of organic coordination complexes in flexible memory devices with diverse substrates.

Fast and Selective Post-polymerization Modification of Conjugated Polymers Using Dimethyldioxirane

Modification of functional groups attached to conjugated polymer backbones can drastically alter the material properties. Oxidation of electron-donating thioalkyl substituents to electron-withdrawing sulfoxides or sulfones is a particularly effective modification. However, so far, this reaction has not been studied for the modification of conjugated polymers used in organic electronics. Crucial questions regarding selectivity and reaction time waited to be addressed. Here, we show that the reaction is highly selective and complete within just a few minutes when using dimethyldioxirane (DMDO) for the oxidation of thioalkyl substituents attached to the well-investigated conjugated polymers poly(9-(1-octylnonyl)carbazole-alt-4,7-dithienylbenzothiadiazole) (PCDTBT) and poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT). The selectivity was confirmed by comparison with polymers obtained from pre-oxidized monomers and by control experiments using related polymers without thioalkyl substituents. Using DMDO, the oxidation yields acetone as the only side-product, which reduces the work-up to mere evaporation of solvents and excessive reagent. Our results show that this oxidation is an exciting method for the preparation of electron-deficient conjugated polymers. It may even allow the preparation of electron acceptors for solar cells directly from the electron donors.

Mapping Polymer Molecular Order in the SEM with Secondary Electron Hyperspectral Imaging

Understanding nanoscale molecular order within organic electronic materials is a crucial factor in building better organic electronic devices. At present, techniques capable of imaging molecular order within a polymer are limited in resolution, accuracy, and accessibility. In this work, presented are secondary electron (SE) spectroscopy and secondary electron hyperspectral imaging, which make an exciting alternative approach to probing molecular ordering in poly(3-hexylthiophene) (P3HT) with scanning electron microscope-enabled resolution. It is demonstrated that the crystalline content of a P3HT film is reflected by its SE energy spectrum, both empirically and through correlation with nano-Fourier-transform infrared spectroscopy, an innovative technique for exploring nanoscale chemistry. The origin of SE spectral features is investigated using both experimental and modeling approaches, and it is found that the different electronic properties of amorphous and crystalline P3HT result in SE emission with different energy distributions. This effect is exploited by acquiring hyperspectral SE images of different P3HT films to explore localized molecular orientation. Machine learning techniques are used to accurately identify and map the crystalline content of the film, demonstrating the power of an exciting characterization technique.

Mobility Evaluation of [1]Benzothieno[3,2- b][1]benzothiophene Derivatives: Limitation and Impact on Charge Transport

Among contemporary semiconductors, many of the best performing materials are based on [1]benzothieno[3,2- b][1]benzothiophene (BTBT). Alkylated derivatives of these small molecules not only provide high hole mobilities but also can be easily processed by thermal vacuum or solution deposition methods. Over the last decade, numerous publications have investigated molecular structures and charge transport properties to elucidate what makes these molecules so special. However, the race toward ever higher mobilities resulted in significantly deviating values, which exacerbates linking molecular structure to electronic properties. Moreover, a recently arisen debate on overestimation of organic field-effect transistor mobilities calls for a revaluation of these numbers. We synthesized and characterized four BTBT derivatives with either one or two alkyl chains (themselves consisting of either 8 or 10 carbon atoms) and investigated their spectroscopic, structural, and electrical properties. By employing two-probe, gated four-point probe and gated van der Pauw measurements, we compare field-effect mobility values at room and low temperatures and discuss their feasibility and viability. We attribute mobility changes to different angles between molecule planes and core-to-core double-layer stacking of asymmetric BTBT derivatives and show higher mobilities in the presence of more and longer alkyl chains. A so-called "zipper effect" brings BTBT cores in closer proximity promoting stronger intermolecular orbital coupling and hence higher charge transport.

Randomly Distributed Conjugated Polymer Repeat Units for High-Efficiency Photovoltaic Materials with Enhanced Solubility and Processability

Three structurally disordered terpolymer derivatives of PffBT4T-2OD (PCE11), prepared by replacing a varied amount of bithiophene linkers with single thiophenes, were found to exhibit reduced aggregation in solution with increasing thiophene content, while important redox and optoelectronic properties remained similar to those of PffBT4T-2OD. Solar cells based on random terpolymer-PC₇₁BM blends exhibited average power conversion efficiencies of over 9.5% when processed with preheated substrates, with fill factors above 70%, exceeding those from PffBT4T-2OD. Thanks to increased solubility, random terpolymer devices were able to be fabricated on room-temperature substrates, reaching virtually identical performance among all three polymers despite remarkable thicknesses of ∼400 nm. Thus, we show that the random terpolymer approach is successful in improving processability while maintaining device performance.

Highly Reliable Superhydrophobic Protection for Organic Field-Effect Transistors by Fluoroalkylsilane-Coated TiO2 Nanoparticles

One of the long-standing problems in the field of organic electronics is their instability in an open environment, especially their poor water resistance. For the reliable operation of organic devices, introducing an effective protection layer using organo-compatible materials and processes is highly desirable. Here, we report a facile method for the depositing of an organo-compatible superhydrophobic protection layer on organic semiconductors under ambient conditions. The protection layer exhibiting excellent water-repellent and self-cleaning properties was deposited onto organic semiconductors directly using a dip-coating process in a highly fluorinated solution with fluoroalkylsilane-coated titanium dioxide (TiO₂) nanoparticles. The proposed protection layer did not damage the underlying organic semiconductors and had good resistance against mechanical-, thermal-, light-stress-, and water-based threats. The protected organic field-effect transistors exhibited more-reliable electrical properties, even when exposed to strong solvents, due to its superhydrophobicity. This study provides a practical solution with which to enhance the reliability of environmentally sensitive organic semiconductor devices in the natural environment.

Low-Temperature Cross-Linkable Small Molecules for Fully Solution-Processed OLEDs

Cross-linkable hole-transporting, host, and electron-transporting materials with a new cross-linking group, uracil, are designed and synthesized. These compounds exhibited good solubility in common organic solvents and excellent solvent resistance after cross-linking at a low temperature of 120 °C. The OLED was fabricated by all-solution processing using cross-linkable synthetic compounds, except for the electrodes. This device exhibited a current efficiency of 39.2 cd A^-1 and a power efficiency of 15.3 lm W^-1 .

Wood-Derived Nanopaper Dielectrics for Organic Synaptic Transistors

The use of biocompatible and biodegradable materials in electronic devices can be an important trend in the development of the next-generation green electronics. In addition, by integrating the advantages of low power consumption, low-cost processing, and flexibility, organic synaptic devices will be promising elements for the construction of brain-inspired computers. However, previously reported electrolyte-gated synaptic transistors are mainly made of non-biocompatible and non-biodegradable electrolytes. Woods are widely considered as one kind of sustainable and renewable materials. We found that wood-derived cellulose nanopapers have ionic conductivity and, therefore, can be used as dielectric materials for organic synaptic transistors. The fabricated wood-derived cellulose nanopapers exhibit decent ionic conductivity of 7.3 × 10^-4 S m^-1 and a high lateral coupling effective capacitance of 18.65 nF cm^-2 at 30 Hz. The laterally coupled organic synaptic transistors using wood-derived cellulose nanopapers as the dielectric layer present excellent transistor performances at the operating voltage below 1.5 V. More significantly, some important synaptic behaviors, such as excitatory postsynaptic current, signal-filtering characteristics, and dendritic integration are successfully simulated in our synaptic transistors. Because the development of electronic devices with biocompatible and biodegradable materials is essential, this work may inspire new directions for the development of "green" neuromorphic electronics.

A flexible organic reflectance oximeter array

The optical method to determine oxygen saturation in blood is limited to only tissues that can be transilluminated. The status quo provides a single-point measurement and lacks 2D oxygenation mapping capability. We use organic printed optoelectronics in a flexible array configuration that senses reflected light from tissue. Our reflectance oximeter is used beyond conventional sensing locations and accurately measures oxygen saturation on the forehead. In a full system implementation, coupled with a mathematical model, we create 2D oxygenation maps of adult forearms under pressure-cuff–induced ischemia. Our skin-like flexible sensor system has the potential to transform oxygenation monitoring of tissues, wounds, skin grafts, and transplanted organs.

Transmission-mode pulse oximetry, the optical method for determining oxygen saturation in blood, is limited to only tissues that can be transilluminated, such as the earlobes and the fingers. The existing sensor configuration provides only single-point measurements, lacking 2D oxygenation mapping capability. Here, we demonstrate a flexible and printed sensor array composed of organic light-emitting diodes and organic photodiodes, which senses reflected light from tissue to determine the oxygen saturation. We use the reflectance oximeter array beyond the conventional sensing locations. The sensor is implemented to measure oxygen saturation on the forehead with 1.1% mean error and to create 2D oxygenation maps of adult forearms under pressure-cuff–induced ischemia. In addition, we present mathematical models to determine oxygenation in the presence and absence of a pulsatile arterial blood signal. The mechanical flexibility, 2D oxygenation mapping capability, and the ability to place the sensor in various locations make the reflectance oximeter array promising for medical sensing applications such as monitoring of real-time chronic medical conditions as well as postsurgery recovery management of tissues, organs, and wounds.

Meltdown! Local Heating by Decaying Excited Host Positive Polarons Triggers Aggregation Quenching in Blue PhOLEDs

Exciton-polaron induced aggregation (EPIA) in organic host materials for blue Phosphorescent Organic Light Emitting Diodes (PhOLEDs) is driven by a non-radiative decay of electronically excited positive polarons resulting in a local heating of the amourphous host matrix. The released heat triggers morphological changes, i. e. molecular aggregation between neighboring host molecules. The resulting aggregates, which our calculations identify as carbazolyl dimers, lead to decreased PhOLED efficiency. Statistical assessment of some host-only morphologies reveals a structure-dependent propensity for molecular aggregation corroborating the identified EPIA mechanism. Our findings provide a fresh look at established molecular design rules and will help to improve blue PhOLED host materials to enhance blue PhOLED device lifetimes.

Doping: A Key Enabler for Organic Transistors

Organic field-effect transistors (OFETs) are the central building blocks of organic electronics, but still suffer from low performance and manufacturing difficulties. This is due in part to the absence of doping, which is mostly excluded from OFET applications for the concern about uncontrollable dopant diffusion. Doping enabled the modern semiconductor industry to build essential components like Ohmic contacts and P-N junctions, empowering devices to function as designed. Recent breakthroughs in organic semiconductors and doping techniques demonstrated that doping can also be a key enabler for high-performance OFETs. However, the knowledge of organic doping remains limited particularly for OFET use. Therefore, this review addresses OFET doping from a device perspective. The paper overviews doping basics and roles in advanced complementary technologies. These fundamentals help to understand why and how doping provides the desired transistor characteristics. Typical OFETs without doping are discussed, with consideration for operating principle and problems caused by the absence of doping. Achievements for channel, contact, and overall doping are also examined to clarify the corresponding doping roles. Finally, doping mechanisms, techniques, and dopants associated with OFET applications are reviewed. This paper promotes fundamental understanding of OFET doping for the development of high-performance OFETs with doped components.

Impact of 2-Ethylhexyl Stereoisomers on the Electrical Performance of Single-Crystal Field-Effect Transistors

Many organic semiconductors (OSCs) inherit chiral alkyl chains, which ensure the desirable high solubility for solution-processing but may also lead to disorder, inhomogeneous film-formation, as well as interfacial defects due to the presence of mixtures of stereoisomers or diastereomers, which impair their peak performance. Here, single-crystal field-effect transistors (SCFETs) of a diketopyrrolopyrrole-based organic semiconductor with chiral 2-ethylhexyl substituents by sublimation in air and organic ribbon mask method are fabricated. Devices of the mesomer (R/S), both enantiomers (R/R, S/S), as well as mixtures of these three stereoisomers measured under ambient conditions exhibit all appreciable p-channel charge carrier mobilities of > 0.1 cm² V^-1 s^-1 despite different packing arrangement in the R/S, R/R (or S/S), and racemate crystal structures. These results suggest a surprising tolerance for isomeric impurities. The highest literature-reported p-channel mobility so far for a diketopyrrolopyrrole-based OSC of 3.4 cm² V^-1 s^-1 (I_on /I_off of 1 × 10⁶ ) is, however, only obtained for the pure R/S mesomer, illustrating the inherent potential of stereochemical purity. These results on SCFETs are further substantiated by studies on organic thin-film transistors (OTFTs) of pure and mixed thin films of the different stereoisomers.

Organic-Single-Crystal Vertical Field-Effect Transistors and Phototransistors

Organic vertical field-effect transistors (VFETs) have attracted significant attention over the past years due to their unique characteristics of high output currents, low operation voltages, high working frequency, and promising high-density integration for circuits. However, most currently reported VFETs demonstrate poor performance, e.g., with low on/off ratio and current density. Here, the first organic-single-crystal vertical field-effect transistors (SC-VFETs) and phototransistors are constructed from 2,6-diphenyl anthracene (DPA) through a modified method. The devices exhibit high on/off ratio of 10⁶ and a high current density of 100 mA cm^-2 under a small voltage of -5 V, which are proved to be one of the best performances for organic VFETs. Furthermore, superior photoresponse performance with photoresponsivity of 110 A W^-1 and detectivity of 10¹³ Jones is obtained under light illumination for vertical phototransistors. These results confirm the control of the intrinsic Schottky barrier height at the graphene-DPA junction along with good interfacial contact effectively suppressing the dark current to realize a large on/off ratio and high light detectivity. This vertical integration of graphene with organic single crystals via simple, effective fabrication processes opens up new opportunities to realize high-performance integrated organic vertical electronic and optoelectronic devices.

Interlayers Self-Generated by Additive-Metal Interactions in Organic Electronic Devices

The fundamental structure of all organic electronic devices is a stack of thin layers sandwiched between electrodes, with precise intralayer morphology and interlayer interactions. Solution processing multilayers with little to no intermixing is, however, technically challenging and often incompatible with continuous roll-to-roll, high-speed manufacturing. Here, an overview of a recently developed methodology for self-generation of interlayers positioned between the active layer and metal contact is presented. The interlayer material is blended as an additive in the active layer and migrates to the organic/metal interface during metal deposition. The driving force for this migration is additive-metal interactions. The generated interlayer positions an interfacial dipole that reduces barriers for charge transfer across the organic/metal interface. This methodology is generic and, as reported here, the self-generated interlayers significantly improve the performance of many devices. Importantly, this approach is compatible with printing and reel-to-reel processing. Directives toward additive selection, processing conditions and integration in future applications are also discussed.

Polypyridyl Metallo-Organic Assemblies for Electrochromic Applications

Electrochromic films undergo optical changes in response to a redox stimulus. This intriguing phenomenon can be used for a wide range of applications, including smart windows, sensors, color displays, and memory elements. Despite the rapid progress of late, designing suitable electrochromic materials that offer low-cost production, appealing colors, and pronounced optical contrast with high efficiency, as well as long-term stability remains an engineering challenge. Solid-state metal oxides, liquid crystals, and organic polymers have been for many years the leading candidates, successfully making their way into commercial products. An alternative class of materials relies on metal complexes that can be processed from solution, offer a variety of colors, and have metal-centered stable and reversible redox chemistry. These metallo-organic materials possess a full range of electrochromic properties, including ultrahigh coloration efficiencies, and cyclic stability. Here, some of the recent scientific developments in this field are highlighted.

Theoretical Calculations for Highly Selective Direct Heteroarylation Polymerization: New Nitrile-Substituted Dithienyl-Diketopyrrolopyrrole-Based Polymers

Direct Heteroarylation Polymerization (DHAP) is becoming a valuable alternative to classical polymerization methods being used to synthesize π-conjugated polymers for organic electronics applications. In previous work, we showed that theoretical calculations on activation energy (E_a) of the C–H bonds were helpful to rationalize and predict the selectivity of the DHAP. For readers’ convenience, we have gathered in this work all our previous theoretical calculations on E_a and performed new ones. Those theoretical calculations cover now most of the widely utilized electron-rich and electron-poor moieties studied in organic electronics like dithienyl-diketopyrrolopyrrole (DT-DPP) derivatives. Theoretical calculations reported herein show strong modulation of the E_a of C–H bond on DT-DPP when a bromine atom or strong electron withdrawing groups (such as fluorine or nitrile) are added to the thienyl moiety. Based on those theoretical calculations, new cyanated dithienyl-diketopyrrolopyrrole (CNDT-DPP) monomers and copolymers were prepared by DHAP and their electro-optical properties were compared with their non-fluorinated and fluorinated analogues.

An Alternative Route to Obtain Carbon Quantum Dots from Photoluminescent Materials in Peat

Peat, an organic compound easily found in the soil (easy to acquire), has more than 50% elemental carbon in its composition and can be used as raw material to produce carbon quantum dots (CQDs, C-dots, Carbon Dots). In this work we describe two simple and low-cost routes for the acquisition of these photoluminescent materials based on peat. The final products were characterized by Fourier transform infrared spectroscopy (FTIR), absorption (UV-Vis) and emission (PL) spectra and high-resolution transmission electron microscopy (HRTEM). The produced CQDs have an average size of 3.5 nm and exhibit coloration between blue and green. In addition, it is possible to produce photoluminescence by means of the aromatic compounds also present in the composition of the peat, in turn exhibiting an intense green coloration. The results indicate great versatility of peat for the production of photoluminescent materials.

Hydrogen-Bonded Donor-Acceptor Arrays at the Solution-Graphite Interface

Controlling the nanoscale morphology of organic thin films represents a critical challenge in the fabrication of organic (opto)electronic devices. The morphology of the (multicomponent) thin films in turn depends on the mutual orientation of the molecular components and their supramolecular packing on the surface. Here, it is shown how the surface co-assembly of electron-donating and -accepting building blocks can be controlled via (supra)molecular design. Hexa-peri-hexabenzocoronene (HBC) derivatives with multiple hydrogen-bonding (H-bonding) sites were synthesized and their co-assembly with alkyl-substituted perylene tetracarboxy diimide (PDI) was studied using scanning tunneling microscopy (STM) at the solution-graphite interface. STM data shows that electron-rich HBCs co-assemble laterally with electron deficient PDIs via preprogrammed H-bonding sites with high fidelity. The surface stoichiometry of the two components could be readily tuned by changing the number of H-bonding sites on the HBC derivatives via organic synthesis. This model study highlights the utility of (supra)molecular design in co-assembly of building blocks relevant for organic electronics.

Organic Bioelectronics: Materials and Biocompatibility

Organic electronic materials have been considered for a wide-range of technological applications. More recently these organic (semi)conductors (encompassing both conducting and semi-conducting organic electronic materials) have received increasing attention as materials for bioelectronic applications. Biological tissues typically comprise soft, elastic, carbon-based macromolecules and polymers, and communication in these biological systems is usually mediated via mixed electronic and ionic conduction. In contrast to hard inorganic semiconductors, whose primary charge carriers are electrons and holes, organic (semi)conductors uniquely match the mechanical and conduction properties of biotic tissue. Here, we review the biocompatibility of organic electronic materials and their implementation in bioelectronic applications.