Efficacy and safety of recombinant human bone morphogenetic protein-2 (rhBMP-2) combined with autologous bone for the treatment of long bone nonunion: A report of a prospective case series

INTRODUCTION

Recombinant human Bone morphogenetic proteins have been used for the treatment of nonunions with promising results. We have been investigating both experimentally and clinically the efficacy of the rhBMP-2 with the macro / micro-porous hydroxyapatite carrier granules on the potency on the reconstruction of long bone defect. The purpose of this study was to prospectively evaluate the efficacy and safety of this specific rhBMP-2 with HA carrier granules mixed with autologous cancellous bone in patients with nonunion and bone defect resulted from the fracture related infection.

MATERIALS AND METHODS

This was a retrospective review of a prospective cohort at a university hospital. Patients diagnosed with nonunion under the definition of the United States Food and Drug Administration with bone defect after long bone fractures were enrolled from January 2020 to February 2021. We included patients with atrophic and oligotrophic nonunion, and hypertrophic nonunion with malalignment that needed to be corrected. The other patient group was consisted of segmental bone defect resulted from FRI. The maximum amount of rhBMP-2 allowed in this clinical study was 6 mg and was added to autologous bone at a 1:1 ratio. Autologous bone was added to the mixture if the volume of mixed graft was insufficient to fill the bone defect. Patients were followed 3, 6, and 12 months post-operatively. Each visit, a radiograph was taken for assessment. Visual analog scale (VAS), questionnaire for quality of life (SF-12 physical component summary [PCS], mental component summary [MCS]), and weight-bearing status were collected for functional outcome assessment. Drug safety was assessed by examining BMP-2 antibodies.

RESULTS

Of the 24 enrolled patients (mean age: 57 years), 15 (62.5 %), 2 (8.33 %), and 7 (29.17 %) presented atrophic nonunion, hypertrophic nonunion with deformity, and bone defect after fracture related infection, respectively. Thirteen patients had nonunion in the femur, 9 in the tibia, and 1 in the humerus and radius. The average amount of harvested autologous bone was 9.25 g and 4.96 mg of rhBMP-2. All 24 patients achieved union after 1-year follow up. The union rate was 95.83 % and 100 % at 6 and 12 months postoperatively, respectively. Preoperative SF-12 PCS (mean: 34.71) improved at 6 and 12 months postoperatively, respectively. Preoperative SF-12 MCS (mean: 42.89) improved 12 months postoperatively (49.13, p = 0.0338). Change of VAS was statistically significant 3 months postoperatively (p = 0.0012). No adverse effects or development of BMP-2 antibodies were observed.

CONCLUSION

BMP-2 combined with autogenous bone resulted in excellent radiographical and functional outcomes in a relatively small prospective series of patients with nonunion and bone defect, without adverse effects. Further investigations are necessary to support our finding and optimize treatment strategies in nonunion patients.

The effect of short implants placed in the posterior region on tilted implants in the 'All-On-Four' treatment concept: a three-dimensional finite element stress analysis

This study aims to investigate the impact of a short implant placed behind the mental foramen with the all-on-four treatment concept using the three-dimensional (3D) finite element stress analysis (FEA). Six different finite element analysis models were designed according to tilted implant angle (17° and 30°), presence of short implants, and short implant diameter (4.1 mm and 4.8 mm). A 100 N force was applied vertically from the central fossa of the lower right second premolar tooth. Maximum equivalent (von Mises) and Minimum/Maximum principal (Pmin/Pmax) stress values and distributions were evaluated by 3D-FEA. The highest stress value among tilted implants was in the T17 group. T30 was the group that caused the most stress in the cortical bone. Adding the short implant to the all-on-four design reduced von Mises stress on multi-unit abutments, abutment screws, and tilted implants in both the 17° and 30° groups. At the same time, it reduced Pmin/Pmax stresses in cortical bone. Similar behavior was observed in terms of stress values and distributions for the 4.1 and 4.8 mm short implant groups. The results show that short implant placement in the posterior region in the all-on-four concept reduces stress on the bone, implants, and prosthetic parts, regardless of the diameter of the short implant. In cases where biomechanical risks such as parafunctional habits and poor bone quality increase, we recommend increasing the number of implants with short implants.

Navicular and Cuboid Fractures

Navicular and cuboid fractures can be complex and difficult to treat. Depending on the mechanism of injury, diagnosis of such fractures is not always possible with conventional radiographs due to the irregularity and overlap of the midfoot bones. Advanced imaging is indicated if a fracture is of high suspicion or to further characterize a displaced fracture. Cuboid and navicular fractures can occur in isolation but are often associated with other midfoot injuries due to their anatomic relationships. Typically, nondisplaced fractures can be treated conservatively, whereas displaced fractures require surgical intervention to prevent future complications.

Development and verification of a novel bone collector with automatic size separating function for orthopedics surgery

BACKGROUND

Autologous bone dust can be filled in bone defects to promote effective bone healing but typically it is lost when using suction during surgery. The aim of this study was to develop a novel bone collector that can be used to collect bone chips/dust of varying sizes without changing current surgical procedures.

RESEARCH DESIGN AND METHODS

This collector was designed to connect to a surgical continuous suction system and comprised a plate filter with a 3 mm hole and featured a taper filter with a mesh size of 0.27 mm for the separation and collection of both coarse and fine bone chips/dust. The bone collector was manufactured using nylon 3D printing and plastic injection with biocompatible materials.

RESULTS

The bone collector functional test revealed high bone chip collection efficiency (93%) with automatic size separation function. Low (3.42%) filtration errors showed that most of the water can be drained smoothly from the bone collector. In clinical usability testing, bone collectors can provide functions demonstrated in in vivo spinal fusion and femoral fracture surgeries with different bone grafting size requirements.

CONCLUSIONS

The novel bone collector has been validated as a viable and effective surgical device, offering surgeons an additional option to enhance patient outcomes.

Tibial bone loss

Critical bone loss after open fractures, while relatively uncommon, occurs most frequently in high-energy injuries. Fractures of the tibia account for the majority of open fractures with significant bone loss. A number of different surgical strategies exist for treatment of tibial bone loss, all with different advantages and disadvantages. Care should be taken by the surgeon to review appropriate indications and all relevant evidence before selecting a strategy.

Osteoimmunological Principles Adapted to Achieve Mechanically Superior Posterolateral Fusion in a New Zealand White Rabbit Model Using Antigen-Coated, Electrospun Beta-Tricalcium Phosphate

Introduction Triggering the immune system via antigenic stimulation at the time of spinal fusion surgery may enhance bone morphogenesis and result in successful bony arthrodesis. We sought to demonstrate that bone morphogenesis could be enhanced via antigenic immunologic stimulation of a surgical fusion site. Methods New Zealand white rabbits underwent non-instrumented posterolateral fusion of L5-6 with implantation of either an immunologically activated graft (inert beta-tricalcium phosphate) or harvested autograft. Fusion was evaluated using plain radiographs, micro-computed tomography (CT), mechanical palpation, and biomechanical testing. The final evaluation was carried out at 12 weeks postoperatively. Results Eight rabbits received immunologically activated grafts; 10 received autografts and served as historical controls. Fusion rates were identical between groups (both 50%). Radiographs and micro CT of the fusion mass showed no significant difference between groups, and both showed good incorporation of the transverse processes into the fusion masses with radiographic evidence confirming trabeculation and bone remodeling. However, mechanical testing of the fusion sites showed superior fusion strength in the rabbits that received immunologically activated grafts, approaching a factor of two on flexion/extension, lateral bending, and axial rotation. Little to no graft material was appreciable in the non-fused antigen-treated specimens. Conclusions There is a long-standing need for a graft material that can replace autograft bone, due to the negative clinical consequences and financial costs pertaining to autologous bone harvesting. No allograft bone substitute to date has been able to reliably replicate the success of harvested autograft bone. This study suggests that immunological enhancement of inert beta-tricalcium phosphate can potentially be a substitute for allograft bone that can meet and even exceed the success of harvested autograft bone.

Necrotizing Fasciitis Originating in the Hand: A Systematic Review and Meta-Analysis

Necrotizing Fasciitis (NF) is a rapidly progressive and potentially lethal infection. This systematic review focused on the treatment and prognosis of the NF of the hand. The literature search was performed in PubMed database, and cohort studies and case reports were deemed eligible. Proportions were pooled to estimate overall mortality and amputation rates, and a logistic regression analysis was performed to evaluate predictors of amputation and mortality. The search algorithm resulted in 51 eligible articles including 48 case reports (54 patients) and 3 larger retrospective cohort studies (107 patients). Most patients had a monomicrobial infection, a surgical debridement on the day of admission, and hospital stay of more than 10 days. The estimated overall amputation rate was 28%, whereas overall mortality was equal to 8%. In the pooled set of case reports, mortality was significantly associated with age older than 54 years and marginally with diabetes mellitus. Necrosis expanding more proximally to the forearm correlated with both amputation and mortality. It is reiterated that early diagnosis of NF is of paramount importance and that early and decisive surgical intervention should have low threshold, especially when potential risk factors are identified.

Late surgical correction after complex unstable pelvic fracture 61 C3 (OTA/AO) of an 18-year-old woman

Surgical fixation of pelvic fractures is often necessary to restore fracture stability and improve patient outcomes. However, early operative management of pelvis fractures is not widely available in many health systems, resulting in conservative treatment approaches. Conservative approaches can lead to uncorrected pelvic deformities, which are challenging to treat and increase the risk of serious complications such as malunion. Treatment of pelvic malunion requires specialized care, access to necessary equipment, and a clearly defined treatment protocol. However, there is a lack of literature describing treatment algorithms for pelvic fracture malunion. This case report aims to incrementally fill this gap in the literature and highlight a logical step-by-step approach for reconstruction of pelvic malunion. This report is a single case of an 18-year-old woman who sustained complex unstable pelvic fracture, indicated for a 3-step reconstruction at a hospital with limited resources but access to computed tomography scan and some specialized pelvis reduction instruments. Postoperative imaging of the pelvis indicated satisfactory reduction and stable fixation of the pelvic reconstruction. After surgery, the patient was able to perform full axial load with no reported pain. This report provides a detailed description of each step of the operative management of a pelvic malunion case with clearly defined sequences, reduction tools, and positioning maneuvers necessary. Demonstrated in this case report, strategic preoperative planning is critical to successfully treating pelvic malunion and improving patient outcomes. This case report provides the necessary information on the management of pelvic reconstruction to inform other surgeons in underserved regions.

In vivo study on osteogenic efficiency of nHA/ gel porous scaffold with nacre water-soluble matrix

BACKGROUND/PURPOSE

Nano-hydroxyapatite (nHA)/ gel porous scaffolds loaded with WSM carriers are promising bone replacement materials that can improve osseointegration ability. This investigation aimed to evaluate the osteoinductive activity by implanting the composition of nano-hydroxyapatite (nHA)/ Gel porous scaffolds as a carrier of WSM via an animal model.

MATERIALS AND METHODS

WSM was extracted and nHA was added to the matrix to construct porous composite scaffolds. The dose-effect curve of WSM concentration and alkaline phosphatase (ALP) activity was made by culturing rat osteoblasts and examining the absorbance. Three different materials were implanted into critical size defects (CSD) in the skulls of rats, which were further divided into four groups: WSM nHA /Gel group, n-WSM nHA /Gel group, HA powder group, and control group.

RESULTS

WSM (150 μg/mL-250μg/mL) effectively improved the activity of ALP in rat osteoblasts. All rats in each group had normal healing. WSM-loaded nHA /Gel group showed better performance on newly-formed bone tissue of rat skull and back at 4th week and 8th week, respectively. At the 4th week, the network of woven bone formed in the WSM-loaded nHA/Gel scaffold material. At 8th week, the reticular trabecular bone in the WSM-loaded scaffold material became dense lamellar bone, and the defect was mature lamellar bone. In the subcutaneous implantation experiment, WSM-loaded nHA/Gel scaffold material showed a better performance of heterotopic ossification than the pure nHA/Gel scaffold material.

CONCLUSION

WSM promotes osteoblast differentiation and bone mineralization. The results confirm that the nHA/ Gel Porous Scaffold with Nacre Water-Soluble Matrix has a significant bone promoting effect and can be used as a choice for tissue engineering to repair bone defects.

Orthobiologics in delayed union and non-union of adult long bones fractures: A systematic review

Background

Fracture healing poses a significant challenge in orthopedics. Successful regeneration of bone is provided by mechanical stability and a favorable biological microenvironment. This systematic review aims to explore the clinical application of orthobiologics in treating aseptic delayed union and non-union of long bones in adults.

Methods

A systematic review was conducted following the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines. Three databases were explored, with no date restrictions, using keywords related to orthobiologics and delayed union and non-union. Eligible studies included human clinical studies in English, with available full texts, examining orthobiologics such as platelet-rich plasma (PRP), mesenchymal stem cells (MSCs), and bone morphogenetic protein (BMPs) for treating aseptic delayed unions and non-unions in adults. Animal studies, in vitro research, and studies on non-unions due to congenital defects, tumors or infections were excluded.

Results

The initial search identified 9417 studies, with 20 ultimately included in the review. These studies involved 493 patients affected by non-union and 256 patients affected by delayed union, with an average age respectively of 40.62 years and 41.7 years. The mean follow-up period was 15.55 months for non-unions and 8.07 months for delayed unions. PRP was the most used orthobiologic, and outcomes were evaluated through time to union, functional scores, and clinical examinations. The results indicated that orthobiologics, especially PRP, tended to yield better outcomes compared to surgical procedures without biological factors.

Conclusion

This systematic review suggests that orthobiologics, such as PRP, BMPs, and MSCs, can be effective and safe in the management of delayed union and non-union fractures. These biological treatments have the potential to improve union rates, reduce healing times, and enhance functional outcomes in patients with non-union fractures. Further research is essential to refine treatment protocols and determine the most suitable orthobiologic for specific patient populations and fracture types.

Sex-specific analysis in patients undergoing Talar OsteoPeriostic grafting from the Iliac Crest (TOPIC) for large osteochondral lesions of the talus

PURPOSE

The purpose of the present study is to assess the gender-specific differences in the presentation and outcomes following Talar OsteoPeriostic grafting from the Iliac Crest (TOPIC) between male and female patients.

METHODS

A prospective comparative analysis was performed comparing consecutive female and male patients having been treated by the press-fit TOPIC procedure. Clinical comparative assessment preoperatively and at 12 months of follow-up included determination of the Numeric Rating Scale (NRS) scores for pain during walking (primary outcome), at rest and during stair-climbing. The Foot and Ankle Outcome Score (FAOS) was also assessed. A computed tomography (CT) scan was performed for lesion size, morphology and localization determination preoperatively as well as 10-12 weeks postoperatively to assess the union of the osteotomy site and at 1 year postoperatively to assess consolidation of the graft as well as intra-graft cyst development.

RESULTS

A total of 48 patients (30 women, 18 men) were eligible for inclusion. Both men and women demonstrated significant functional improvements postoperatively concerning the clinical outcomes with no significant differences between men and women (n.s.) except for a significantly greater improvement in postoperative FAOS pain scores in women. Men presented with OLTs significantly larger in both surface area (208 mm2 for males versus 155 mm2 for females, p < 0.05) as well as lesion volume (3.0 cm3 for males versus 1.8 cm3 for females, p < 0.05). At 1-year postoperatively, all patients showed graft consolidation. Cyst formation was present in 11 females (37% of the group) and 10 males (59% of the group), respectively (n.s.).

CONCLUSION

Both males and females showed clinically relevant improvements in the clinical outcomes after undergoing the TOPIC procedure with significant differences in preoperative lesion size. The TOPIC procedure is a good treatment strategy for large OLTs in both men and women.

LEVEL OF EVIDENCE

Level III, comparative prospective clinical cohort.

Efficacy and safety of autologous or allogeneic mesenchymal stromal cells from adult adipose tissue expanded and combined with tricalcium phosphate biomaterial for the surgical treatment of atrophic nonunion of long bones: a phase II clinical trial

BACKGROUND

Autologous bone grafting is the standard treatment for the surgical management of atrophic nonunion of long bones. Other solutions, such as bone marrow mesenchymal stem cells (BM-MSC) combined with phospho-calcium material, have also been used. Here we evaluate the safety and early efficacy of a novel procedure using autologous or allogenic adipose tissue mesenchymal stromal cells (AT-MSC) seeded in a patented tricalcium phosphate-based biomaterial for the treatment of bone regeneration in cases of atrophic nonunion.

METHODS

This was a prospective, multicentric, open-label, phase 2 clinical trial of patients with atrophic nonunion of long bones. Biografts of autologous or allogenic AT-MSC combined with a phosphate substrate were manufactured prior to the surgical procedures. The primary efficacy was measured 6 months after surgery, but patients were followed for 12 months after surgery and a further year out of the scope of the study. All adverse events were recorded. This cohort was compared with a historical cohort of 14 cases treated by the same research team with autologous BM-MSC.

RESULTS

A total of 12 patients with atrophic nonunion of long bones were included. The mean (SD) age was 41.2 (12.1) years and 66.7% were men. Bone healing was achieved in 10 of the 12 cases (83%) treated with the AT-MSC biografts, a percentage of healing similar (11 of the 14 cases, 79%) to that achieved in patients treated with autologous BM-MSC. Overall, two adverse events, in the same patient, were considered related to the procedure.

CONCLUSIONS

The results of this study suggest that AT-MSC biografts are safe for the treatment of bone regeneration in cases of atrophic nonunion and reach high healing rates.

TRIAL REGISTRATION

Study registered with EUDRA-CT (2013-000930-37) and ClinicalTrials.gov (NCT02483364).

Prognostic Factors in Necrotizing Fasciitis: Insights from a Two-Decade, Two-Center Study Involving 209 Cases

INTRODUCTION

Necrotizing fasciitis (NF) is a critical disease with high morbidity and mortality rates that poses significant challenges in diagnosis and treatment. Prognostic factors for the clinical course of NF remain unclear and are currently under research. This study aims to identify such factors in a large cohort of patients which represents a major comprehensive investigation of prognostic factors for NF.

METHODS

Retrospective analysis was conducted on necrotizing fasciitis cases from 2003 to 2023 at two German hospitals. Data included demographics, comorbidities, laboratory findings, infection site, causative microorganisms and outcomes. Statistical analysis involved t-tests, chi-square tests, and ROC analysis.

RESULTS

A total of 209 patients were included, with a mortality rate of 18%. Patients were categorized into survivors (n = 171) and non-survivors (n = 38). Non-survivors were significantly older (68.9 ± 13.9 years vs. 55.9 ± 14.3 years; p < 0.01) and exhibited a higher prevalence of peripheral vascular diseases, cancer, and heart, liver, or renal insufficiency. Laboratory findings and scoring results also varied significantly between the two groups. The ROC curve analysis identified age as a predictor of mortality, with an optimal cut-off value of 68.5 years (sensitivity: 60.5%, specificity: 81.9%). Higher age was associated with increased mortality risk.

CONCLUSIONS

The patient's age stands out as the primary predictive element for mortality in necrotizing fasciitis. Additionally, we advocate for employing the Laboratory and Anamnestic Risk Indicator for Necrotizing Fasciitis (LARINF-score), which holds substantial prognostic significance and is straightforward to calculate. Considering our findings, crafting a clinical algorithm or scoring mechanism to forecast mortality in NF would be a promising target for future research.

Improving material properties of a poloxamer P407 hydrogel-based hydroxyapatite bone substitute material by adding silica-A comparative in vivo study

The structure and handling properties of a P407 hydrogel-based bone substitute material (BSM) might be affected by different poloxamer P407 and silicon dioxide (SiO2) concentrations. The study aimed to compare the mechanical properties and biological parameters (bone remodeling, BSM degradation) of a hydroxyapatite: silica (HA)-based BSM with various P407 hydrogels in vitro and in an in vivo rat model. Rheological analyses for mechanical properties were performed on one BSM with an SiO2-enriched hydrogel (SPH25) as well on two BSMs with unaltered hydrogels in different gel concentrations (PH25 and PH30). Furthermore, the solubility of all BSMs were tested. In addition, 30 male Wistar rats underwent surgical creation of a well-defined bone defect in the tibia. Defects were filled randomly with PH30 (n = 15) or SPH25 (n = 15). Animals were sacrificed after 12 (n = 5 each), 21 (n = 5 each), and 63 days (n = 5 each). Histological evaluation and histomorphometrical quantification of new bone formation (NB;%), residual BSM (rBSM;%), and soft tissue (ST;%) was conducted. Rheological tests showed an increased viscosity and lower solubility of SPH when compared with the other hydrogels. Histomorphometric analyses in cancellous bone showed a decrease of ST in PH30 (p = .003) and an increase of NB (PH30: p = .001; SPH: p = .014) over time. A comparison of both BSMs revealed no significant differences. The addition of SiO2 to a P407 hydrogel-based hydroxyapatite BSM improves its mechanical stability (viscosity, solubility) while showing similar in vivo healing properties compared to PH30. Additionally, the SiO2-enrichment allows a reduction of poloxamer ratio in the hydrogel without impairing the material properties.

Top fifty cited articles on humeral fractures

Background

Humeral fractures (HF) are common orthopedic pathologies. Reviewing the content and quality of influential literature over time is important to advance scientific research regarding a specific topic. This study aims to explore and appraise the fifty most cited HF studies that had been published in orthopedic literature.

Methods

The Web of Science database was used to conduct a systematic search for articles pertaining to HF. Articles were sorted out in descending order of citations and were included based on their relevance to HF. Data and metrics of the included studies were recorded. The methodological quality of the studies was assessed using the Modified Coleman Methodology Score (MCMS) and the Methodological Index for Non-randomized Studies criteria. Statistical analysis was conducted to explore any significant relationships between the date of publication and other relevant variables.

Results

Included articles (N = 50) were published between 1959 and 2015, with a total of 14,864 accumulated citations. Europe and North America contributed to all but one of the included studies. The Journal of Bone and Joint Surgery contributed to the highest number of included articles with 27 articles (54%). The proximal humerus was the most commonly explored HF location in our study (72%). The average MCMS and Methodological Index for Non-randomized Studies scores were reported to be 64.6 and 10.4, respectively, and the majority of articles (52%) were considered level four case series. Year of publication was found to have a positive correlation with increasing level of evidence(r = -0.301, P = .044), citation density (r = 0.734, P < .001), and MCMS score (r = 0.41, P = .01).

Conclusion

The level of evidence, MCMS scores, and citation density of influential HF literature has been increasing with time, reflecting the increasing effort and work being put in that field. While the findings seem encouraging, additional high-quality research is needed to help achieve better treatment strategies and outcomes.

De Quervain's tenosynovitis as an occupational disease in agricultural worker: A case report

BACKGROUND

De Quervain's tenosynovitis is upper-limb disorder, more frequent in women. It is rarely recognized as an occupational disease.

OBJECTIVE

In this paper we reported work related de Quervain's tenosynovitis in cow milker.

METHODS

Ergonomic risk factors were assessed by utilizing assessment of repetitive tasks (ART) of the upper limbs method. Physical examination and imaging exams were used.

RESULTS

We presented a 36-year-old female agricultural worker (workplace cow milker) exposed to work factors (forceful hand/wrist exertions, repetition, extreme postures) for 14 years. She was suffering the pain in the right hand, mainly near the thumb for few years. She was treated conservatively and surgically, however disability was permanent. Clinical examination showed slight edema of the right hand, increased palm's sweating. Patient had reduced range of movements and grip strength.

CONCLUSIONS

Report shows that work-related factors were strongly associated with diagnosed de Quervain's tenosynovitis. Hand function plays an essential role in carrying out activities of daily living and this disorder pose a relevant burden of disease. Exposure to biomechanical factors should be an important initial target for the prevention of De Quervain's tenosynovitis in the working population.

A Bioactive Degradable Composite Bone Cement Based on Calcium Sulfate and Magnesium Polyphosphate

Calcium sulfate bone cement (CSC) is extensively used as a bone repair material due to its ability to self-solidify, degradability, and osteogenic ability. However, the fast degradation, low mechanical strength, and insufficient biological activity limit its application. This study used magnesium polyphosphate (MPP) and constructed a composite bone cement composed of calcium sulfate (CS), MPP, tricalcium silicate (C3S), and plasticizer hydroxypropyl methylcellulose (HPMC). The optimized CS/MPP/C3S composite bone cement has a suitable setting time of approximately 15.0 min, a compressive strength of 26.6 MPa, and an injectability of about 93%. The CS/MPP/C3S composite bone cement has excellent biocompatibility and osteogenic capabilities; our results showed that cell proliferation is up to 114% compared with the control after 5 days. After 14 days, the expression levels of osteogenic-related genes, including Runx2, BMP2, OCN, OPN, and COL-1, are about 1.8, 2.8, 2.5, 2.2, and 2.2 times higher than those of the control, respectively, while the alkaline phosphatase activity is about 1.7 times higher. Therefore, the CS/MPP/C3S composite bone cement overcomes the limitations of CSC and has more effective potential in bone repair.

Radiographic outcomes and non-union factor analysis in fragmentary segmental femoral shaft fractures (AO/OTA 32C3) treated with reamed antegrade nailing

This study retrospectively assessed radiographic outcomes and risk factors associated with non-union in femoral shaft fragmentary segmental fractures (AO/OTA 32C3) treated with reamed antegrade intra-medullary nailing. Radiological outcomes, including union and alignment, were evaluated. The risk factors for non-union were investigated, including demographics and treatment-related characteristics, such as the number of interlocking screws, segmentation length, main third fragment length, distance of the main third fragment, width ratio and exposed nail length in one cortex from immediate post-operative radiographs. Multivariate logistic regression was used for statistical analysis. Among 2295 femoral shaft fracture patients from three level-1 trauma centers, 51 met the inclusion criteria. The radiological union was achieved in 37 patients (73%) with a mean union time of 10.7 ± 4.8 months. The acceptable axial alignment was observed in 30 patients (59%). Multiple logistic regression analysis identified only exposed nail length as a significant risk factor for non-union (odds ratio: 1.599, p = 0.003) and the cut-off value was 19.1 mm (sensitivity, 0.786; specificity, 0.811). The study revealed high rates of non-union (27%) and malalignment (41%). Therefore, patients who underwent intramedullary nailing with an exposed nail length greater than 19.1 mm or about twice the nail diameter should be cautioned of the potential non-union.

Impact of osteoporosis and osteoporosis medications on fracture healing: a narrative review

Antiresorptive medications do not negatively affect fracture healing in humans. Teriparatide may decrease time to fracture healing. Romosozumab has not shown a beneficial effect on human fracture healing.

BACKGROUND

Fracture healing is a complex process. Uncertainty exists over the influence of osteoporosis and the medications used to treat it on fracture healing.

METHODS

Narrative review authored by the members of the Fracture Working Group of the Committee of Scientific Advisors of the International Osteoporosis Foundation (IOF), on behalf of the IOF and the Société Internationale de Chirurgie Orthopédique et de Traumatologie (SICOT).

RESULTS

Fracture healing is a multistep process. Most fractures heal through a combination of intramembranous and endochondral ossification. Radiographic imaging is important for evaluating fracture healing and for detecting delayed or non-union. The presence of callus formation, bridging trabeculae, and a decrease in the size of the fracture line over time are indicative of healing. Imaging must be combined with clinical parameters and patient-reported outcomes. Animal data support a negative effect of osteoporosis on fracture healing; however, clinical data do not appear to corroborate with this. Evidence does not support a delay in the initiation of antiresorptive therapy following acute fragility fractures. There is no reason for suspension of osteoporosis medication at the time of fracture if the person is already on treatment. Teriparatide treatment may shorten fracture healing time at certain sites such as distal radius; however, it does not prevent non-union or influence union rate. The positive effect on fracture healing that romosozumab has demonstrated in animals has not been observed in humans.

CONCLUSION

Overall, there appears to be no deleterious effect of osteoporosis medications on fracture healing. The benefit of treating osteoporosis and the urgent necessity to mitigate imminent refracture risk after a fracture should be given prime consideration. It is imperative that new radiological and biological markers of fracture healing be identified. It is also important to synthesize clinical and basic science methodologies to assess fracture healing, so that a convergence of the two frameworks can be achieved.

Proprioception After Primary Repair of the Anterior Cruciate Ligament

BACKGROUND

Primary repair of the anterior cruciate ligament (ACL) has some potential advantages over the reconstruction technique, which include but are not limited to better knee sensation due to preservation of the natural ACL tissue in patients compared with tendon graft. Proprioception is impaired after ACL injuries and the sense of the joint position is lost.

PURPOSE/HYPOTHESIS

The purpose of this study was to compare arthroscopic ACL primary repair and ACL reconstruction techniques clinically and functionally and analyze the differences in proprioception. It was hypothesized that primary repair would restore knee joint proprioception more successfully because the original tissue of the ACL is preserved.

STUDY DESIGN

Cohort study; Level of evidence, 3.

METHODS

A total of 63 patients (34 underwent reconstruction and 29 underwent primary repair between 2017 and 2020) and 33 healthy controls, as well as the healthy knees of the operated groups, were evaluated between 24 and 48 months (mean, 29 months) postoperatively. Patients with proximal femoral avulsion tears and stump quality suitable for repair underwent primary repair, and those with tears outside these criteria underwent reconstruction using hamstring tendon autograft. Proprioception was evaluated using the active joint position sensation method during weightbearing, with a digital inclinometer used to measure differences between the target and achieved flexion angles of 15°, 30°, and 60°.

RESULTS

At 15° of knee flexion, the deviation angles for the healthy knee of the reconstruction and primary repair groups were significantly smaller than those of the control group (P < .001), but there was no statistically significant difference between the groups in terms of deviation angle at 30° and 60° of flexion. The deviation angle of the operated knees was statistically significantly larger in the reconstruction group than in the primary repair group at all angles. The deviation angles at 15°, 30°, and 60° were 2.83°, 2.66°, and 2.66° in the reconstruction group and 1.00°, 1.00°, and 1.33° in the primary repair group, respectively (P < .001). There was no statistically significant difference between the reconstruction and primary repair groups in terms of clinical scores.

CONCLUSION

Primary ACL repair can preserve proprioception in a well-selected patient group. In short-term follow-up, primary repair of the ACL in patients with proximal femoral avulsion tears and stump quality suitable for repair appears to be proprioceptively protective. Future studies are needed to clarify the long-term consequences of primary repair on proprioception in a larger population.

Valgising angular stable plate fixation in the treatment of multifragmentary proximal humeral fractures in elderly patients

INTRODUCTION

The frequency of proximal humeral fractures shows an increasing tendency, especially in the elderly, who are frequently affected by osteoporosis. The adequate treatment of complex, displaced fractures poses a serious challenge. Among surgical treatment options, osteosynthesis with an angular stable plate is preferred, however, the implant-related complication rate may be exceptionally high. In our present study, we report the short-term outcomes of our new method of valgising angular stable plate fixation which we use for multifragmentary, displaced proximal humeral fractures in elderly patients.

MATERIALS AND METHODS

We retrospectively evaluated the clinical and radiological outcomes of 52 patients (46 female and 6 male, age: 71.9 ± 9.6) who suffered dislocated three- or four-part fractures and underwent valgising angular stable plate fixation.

RESULTS

Mean follow-up time was 17.3 months, while the functional outcomes were as following: excellent in 26, good in 18, moderate in 5 and poor in 3 patients. The mean Constant-Murley Score was 82.5 ± 11.2. Functional outcomes only showed significant correlation (p = 0.031) with age and were proven unrelated to fracture type, BMI and known primary diseases. The cumulative complication rate was 9.6% and revision rate was 5.8%. Neurological deficit, pseudoarthrosis or avascular humeral head necrosis did not occur during the follow-up period.

CONCLUSIONS

Valgising angular stable plate fixation that we apply for proximal humeral fractures provided favourable functional outcomes and a low postoperative complication rate due to the optimal head and plate placement. The method is especially effective for the treatment of displaced three- and four-part fractures with weakened, osteoporotic bone structure.

Radiographical outcomes of a cellular based allograft following foot/ankle arthrodesis in patients with risk for non-union

Morbidity associated with autograft harvest has led to the need for alternative bone grafts during fusion surgical procedures. The purpose of this study is to evaluate the efficacy of a cellular bone allograft (CBA) in patients who underwent foot/ankle fusion surgery. Retrospective data of patients who underwent foot/ankle arthrodesis using a CBA between XXXX and XXXX were collected from a single site. Patients were at least 18 years of age at the time of surgery and had ankle/foot surgery with Trinity ELITE CBA as the primary or only bone graft. Patients' radiographic union was assessed at three (3) months, six (6) months, nine (9) months, and twelve (12) months. Twenty-two (22) patients and 29 joints were evaluated. The mean age and BMI of the cohort were 54±9yrs and 30.5±6kg/m2, respectively. The surgical indications were degenerative joint diseases, trauma, and arthritis. All patients except one had at least one risk factor for non-union. At 12 months, 21 of the 22 patients (95%) attained successful fusion with an average time of 6 months. In addition, there was a 100% fusion among patients with prior failed fusion, nicotine use, diabetes, neuropathy, and osteoporosis. There was no significant difference in time to fusion between patients with non-union risk factor(s) ≤ 1 and ≥ 2 (p=0.71). No complication or adverse event was reported following the surgery. The use of CBA resulted in high fusion among patients with the risk of non-union. CBA is a viable bone graft substitute for autograft in foot/ankle arthrodesis procedures.

Elbow Reconstruction with Megaprosthesis: An Effective Strategy for Salvage Surgery in Trauma Patients

Delayed fracture healing can have devastating functional consequences, including pseudoarthrosis. Many factors can contribute to delayed healing, including decreased vascularity, micro-motion at the fracture site, large fracture gaps, multiple traumas at the same site, compromised metabolic status, surgical complications, and other conditions. A 61-year-old female patient was referred to our hospital with left distal humeral pseudarthrosis, accompanied by chronic pain and disability. Two years prior, the patient suffered a traumatic incident. At another medical facility, the patient underwent open reduction and internal fixation surgery with simultaneous ulnar nerve transposition. She showed favorable postoperative recovery. Unfortunately, approximately one year later, the patient sustained a second trauma to the same arm. This led to peri-implant fracture and post-traumatic aseptic degradation of the osteosynthesis system which was subsequently removed. Twelve months after the last surgery, the patient was referred to our hospital and, after thorough consideration of the therapeutic options, we decided to perform left elbow arthroplasty with left distal humeral reconstruction by using Zimmer's Comprehensive Segmental Revision System. This approach is generally reserved for tumors, and only a handful of cases of megaprostheses for non-tumoral indications have been previously reported. The surgery and perioperative care of our patient were optimal, there were no complications, and the patient recovered arm functionality following rehabilitation.

Porous Cage Macro-Topography Improves Early Fusion Rates in Anterior Cervical Discectomy and Fusion

Objectives

Anterior cervical discectomy and fusion (ACDF) aims to improve pain, relieve neural compression, achieve rapid solid bony arthrodesis, and restore cervical alignment. Bony fusion occurs as early as 3 months and up to 24 months after ACDF. The correlations between bony fusion and clinical outcomes after ACDF remain unclear. Macro-topographic and porous features have been introduced to interbody cage technology, aiming to improve the strength of the bone-implant interface to promote early fusion. In this study, we aimed to compare clinical outcomes and CT-evaluated fusion rates in patients undergoing ACDF using one of two different interbody cages: traditional NanoMetalene™ (NM) cages and NM cages with machined porous features (NMRT).

Methods

This was a prospective, observational, nonrandomised, cohort study of consecutive patients undergoing ACDF. The NM cage cohort was enrolled first, then the NMRT cohort second. The visual analogue scale, neck disability index, and 12-item Short Form Survey scores were evaluated preoperatively and at 6 weeks, 3 months, and 6 months. The minimum clinical follow-up period was 12 months. Plain radiographs were obtained on postoperative day 2 to assess instrumentation positioning, and computed tomography (CT) was performed at 3 and 6 months postoperatively to assess interbody fusion (Bridwell grade).

Results

Eighty-nine (52% male) patients with a mean age of 62 ± 10.5 years were included in this study. Forty-one patients received NM cages, and 48 received NMRT cages. All clinical outcomes improved significantly from baseline to 6 months. By 3 months, the NMRT group had significantly higher CT fusion rates than the NM group (79% vs 56%, p=0.02). By 6 months, there were no significant differences in fusion rates between the NMRT and NM groups (83% vs 78%, p=0.69). The mean Bridwell grade at 6 months was 1.4 ± 0.7 in the NMRT group and 1.8 ± 1.0 in the NM group (p=0.08).

Conclusions

With both NM and NMRT cages, serial improvements in postoperative clinical outcomes were associated with fusion progression on CT. NMRT cages demonstrated significantly better fusion at 3 months and a trend toward higher quality of fusion at 6 months compared with NM cages, suggesting earlier cage integration with NMRT. An early 3-month postoperative CT is adequate for fusion assessment in almost 80% of patients undergoing ACDF with an NMRT cage, permitting an earlier return to activity.

A retrospective cohort study of autogenous iliac strut bone grafting in large bone defects of the lower extremity

Autogenous iliac bone graft (AIBG) is the treatment of choice for managing bone defects, and favorable results have been reported for bone defects < 5 cm in length. In large bone defects ≥ 5 cm, it is difficult to obtain good results with simple bone grafting, and other management options have drawbacks, such as long immobilization periods and high complication rates. We hypothesized that AIBG in the strut form might show favorable results in large bone defects with minimal complications. This study aimed to investigate the outcomes of strut-type AIBG and evaluate its effectiveness compared to cancellous AIBG. This retrospective study included 50 patients who underwent AIBG for bone defects at a single institution between March 2011 and April 2020. We performed corticocancellous AIBG in a strut form to manage bone defects ≥ 5 cm in the lower extremities. The strut bone was harvested along the iliac crest and grafted slightly longer than the bone defect to apply a sufficient compressive force. Demographic information and radiographic and clinical results of patients who underwent strut AIBG (Group S) were analyzed. The outcomes of union, time to union, complications, and reoperation were compared with those of patients who underwent cancellous AIBG (Group C). The study population comprised 37 men (74%) and 13 women (26%), with a mean age of 50.0 (range: 19-78). The average follow-up period was 25.6 months (12-104 months). Group S included 16 patients with a mean bone defect length of 6.8 ± 1.2 cm. In Group S, union was achieved in all patients, with an average time to union of 6.7 months. Complications occurred in four cases, all related to wound problems. Group C comprised d 34 patients with a mean defect length of 2.8 ± 1.1 cm. Complications occurred in five patients in Group C, including four soft tissue problems and one implant failure. When comparing the outcomes of Groups S and C, no significant differences were observed. AIBG is an effective and safe technique for managing bone defects. Strut AIBG can be used effectively for bone defects ≥ 5 cm in the lower extremities.

Selective Laser Melting of the Porous Ta Scaffold with Mg-Doped Calcium Phosphate Coating for Orthopedic Applications

Addressing the repair of large-scale bone defects has become a hot research topic within the field of orthopedics. This study assessed the feasibility and effectiveness of using porous tantalum scaffolds to treat such defects. These scaffolds, manufactured using the selective laser melting (SLM) technology, possessed biomechanical properties compatible with natural bone tissue. To enhance the osteogenesis bioactivity of these porous Ta scaffolds, we applied calcium phosphate (CaP) and magnesium-doped calcium phosphate (Mg-CaP) coatings to the surface of SLM Ta scaffolds through a hydrothermal method. These degradable coatings released calcium and magnesium ions, demonstrating osteogenic bioactivity. Experimental results indicated that the Mg-CaP group exhibited biocompatibility comparable to that of the Ta group in vivo and in vitro. In terms of osteogenesis, both the CaP group and the Mg-CaP group showed improved outcomes compared to the control group, with the Mg-CaP group demonstrating superior performance. Therefore, both CaP and magnesium-CaP coatings can significantly enhance the osseointegration of three-dimensional-printed porous Ta, thereby increasing the surface bioactivity. Overall, the present study introduces an innovative approach for the biofunctionalization of SLM porous Ta, aiming to enhance its suitability as a bone implant material.

Free iliac crest grafting technology for the management of critical-sized tibial bone defect

OBJECTIVE

To introduce the method and experience of treating critical-sized tibial bone defect by taking large iliac crest bone graft.

METHODS

From January 2020 to January 2022, iliac crest bone grafting was performed in 20 patients (10 men and 10 women) with critical-sized tibial bone defect. The mean length of bone defect was 13.59 ± 3.41. Bilateral iliac crest grafts were harvested, including the inner and outer plates of the iliac crest and iliac spine. The cortical bone screw was used to integrate two iliac bone blocks into one complex. Locking plate was used to fix the graft-host complex, supplemented with reconstruction plate to increase stability when necessary. Bone healing was evaluated by cortical bone fusion on radiographs at follow-up, iliac pain was assessed by VAS score, and lower limb function was assessed by ODI score. Complications were also taken into consideration.

RESULTS

The average follow-up time was 27.4 ± 5.6 (Range 24-33 months), the mean VAS score was 8.8 ± 1.9, the mean ODI score was 11.1 ± 1.8, and the number of cortical bone fusion in the bone graft area was 3.5 ± 0.5. Satisfactory fusion was obtained in all cases of iliac bone transplant-host site. No nonunion, shift or fracture was found in all cases. No infection and bone resorption were observed that need secondary surgery. One patient had dorsiflexion weakness of the great toe. Hypoesthesia of the dorsal foot was observed in 2 patients. Ankle stiffness and edema occurred in 3 patients. Complications were significantly improved by physical therapy and rehabilitation training.

CONCLUSION

For the cases of critical-sized tibial bone defect, the treatment methods are various. In this paper, we have obtained satisfactory results by using large iliac bone graft to treat bone defect. This approach can not only restore the integrity of the tibia, but also obtain good stability with internal fixation, and operation skills are more acceptable for surgeons. Therefore, it provides an alternative surgical method for clinicians.

Critical size bone defects managed with modern techniques of bone transport: An update

Bone transport is one of several techniques that has been proven to be effective in addressing critical bone loss. While it was first described over 100 years ago, modifications to this technique coupled with advances in technology have allowed us to perform bone transport with higher success rates and reduced complication rates. Modern techniques of bone transport aim to shorten the duration of time an external fixator is utilized to reduce its associated complications and burden to patients. We present an update on modern techniques of bone transport for critical size defects and methods to shorten the external fixation time.

Trends of impact factor contributors to the Injury Journal: A bibliometric analysis

PURPOSE

This study aims to analyse papers concerning journal impact factors published in the Injury-International Journal of the Care of the Injured between 1997 and 2022. Through this analysis, the research offers valuable insights into the publication performance and contributors to the journal impact factor, encompassing papers, authors, institutions, and countries.

METHODS

Articles and reviews published in the Injury between 1995 and 2021 were examined using the Science Citation Index Expanded database. The study employed the journal impact factor contributing indicator to compare highly cited and high journal impact factor papers across various aspects, including papers, authors, institutions, and countries.

RESULTS

A notable correlation exists between prolific authors, institutions, and countries, alongside those who contribute to high journal impact factors. However, a less distinct connection was observed between highly cited papers/authors and high journal impact factor contributors. The Injury serves as a well-regarded international journal. Notably, editorial members of the journal play a substantial role, serving as model editors and contributing significantly to the journal's success. Out of the Top 25 IF contributing papers with the CN of 34 or more the following themes were noted to dominate: bone healing/tissue regeneration (40 %) of papers, covid-19 pandemic (24 %), polytrauma/coagulopathy (12 %) and infection (8 %).

CONCLUSIONS

Utilizing the journal impact factor to assess research performance at the individual, institutional, or national levels appears not to be the most appropriate method. The results show that highly cited authors did not hold the distinction of being the primary contributors to the IF. Analysis revealed a low significant relationship among the primary contributors to the IF, highly cited papers, and the most influential papers in 2022. A more effective indicator could involve considering the total number of citations a publication receives from its year of publication up to the end of the most recent year.

Quantitative Volumetric Measurements of Bone Grafting Sites Within the Lower Extremity on Computed Tomography Scans

The anterior iliac crest is one of the most used options; however, pain and other complications have been reported. Other options for bone harvest in the lower extremity, such as the proximal tibia and calcaneus, can be useful sites for bone grafting. Computed tomography angiography images of the lower extremity were analyzed using 3-D Slicer™ medical imaging software, creating an advanced 3-dimensional model. Bone volume (cm3) and bone mineral density (Hounsfield units) were measured from the cancellous bone in the anterior iliac crest, posterior iliac crest, proximal tibia, and the calcaneus. Fifteen studies were included. The total volume measured it was of 61.88 ± 14.15 cm3, 19.35 ± 4.16 cm3, 32.48 ± 7.49 cm3, 26.40 ± 7.18 cm3, for the proximal tibia, anterior and posterior iliac crest, and calcaneus, respectively. Regarding Hounsfield units, the densities were 116 ± 58.77, 232.4 ± 68.65, 214.4 ± 74.45, 170.5 ± 52.32, for proximal tibia, anterior and posterior iliac crest, and calcaneus. The intraclass correlation coefficients were in average >0.94. In conclusion, the proximal tibia has more cancellous bone than the anterior and posterior iliac crest. The calcaneus has more cancellous bone than the anterior iliac crest. Bone mineral density was highest in the anterior iliac crest and in proximal tibia was the lowest value.

Distal Tibial Allograft for the Treatment of Anterior Shoulder Instability With Glenoid Bone Loss: A Systematic Review and Meta-analysis

BACKGROUND

The use of a distal tibial allograft (DTA) for reconstruction of a glenoid defect in anterior shoulder instability has grown significantly over the past decade. However, few large-scale clinical studies have investigated the clinical and radiographic outcomes of the DTA procedure.

PURPOSE

To conduct a systematic review and meta-analysis of clinical studies with data on outcomes and complications in patients who underwent the DTA procedure for recurrent anterior shoulder instability with glenoid bone loss.

STUDY DESIGN

Systematic review and meta-analysis; Level of evidence, 4.

METHODS

A comprehensive search of major bibliographic databases was conducted for articles pertaining to the use of a DTA for the management of anterior shoulder instability with associated glenoid bone loss. Postoperative complications and outcomes were extracted and compiled in a meta-analysis.

RESULTS

Of the 8 included studies with 329 total participants, the mean patient age was 28.1 ± 10.8 years, 192 (83.8%) patients were male, and the mean follow-up was 38.4 ± 20.5 months. The overall complication rate was 7.1%, with hardware complications (3.8%) being the most common. Partial graft resorption was observed in 36.5% of the participants. Recurrent subluxation was reported in 1.2% of the participants, and recurrent dislocation prompting a reoperation was noted in 0.3% of the participants. There were significant improvements in clinical outcomes, including American Shoulder and Elbow Surgeons score (40.9-point increase; P < .01), Single Assessment Numeric Evaluation (47.2-point increase; P < .01), Western Ontario Shoulder Instability Index (49.4-point decrease; P < .01), Disabilities of the Arm, Shoulder and Hand (20.0-point decrease; P = .03), and visual analog scale (2.1-point decrease; P = .05). Additionally, postoperative shoulder range of motion significantly increased from baseline values.

CONCLUSION

The DTA procedure was associated with a low complication rate, good clinical outcomes, and improved range of motion among patients with anterior shoulder instability and associated glenoid defects.

Drug eluting bioactive glass ceramics for fusion in spondylodiscitis: a pilot study

Retrospective observational study. To determine the efficacy and safety of bioactive glass ceramics mixed with autograft in the treatment of spondylodiscitis. Thirty-four patients with spondylodiscitis underwent surgery using autologous bone graft augmented by antibiotic loaded bioactive glass ceramic granules. Twenty-five patients aging 6 to 77, completed 1-year follow-up. The lumbosacral junction was affected in 3, lumbar spine in 13, one each in the dorso-lumbar junction and sacrum, and 7 dorsal spines. The organism isolated was Mycobacterium tuberculosis in 15, Methicillin sensitive Staphylococcus aureus (MSSA) in 4, Pseudomonas aeruginosa in 4, Klebsiella pneumoniae in one, Burkholderia pseudomallei in 1, and mixed infections in 2. All patients had appropriate antibiotic therapy based on culture and sensitivity. Clinical and radiological evaluation of all the patients was done at 6 weeks, 3 months, 6 months, and 12 months after the surgery. Twenty-three patients improved clinically and showed radiographic fusion between 6 and 9 months. The patient with Burkholderia infection died due to fulminant septicemia with multi organ failure while another patient died at 9 months due to an unrelated cardiac event. The mean Visual Analogue Score (VAS) at the end of 1-year was 2 with radiological evidence of fusion in all patients. There were no re-infections or discharging wounds, and the 30-day re-admission rate was 0. Bioactive glass ceramics is a safe and effective graft expander in cases of spondylodiscitis. The absorption of antibiotics into the ceramic appears to help the elimination of infection.

Bone-Regeneration Therapy Using Biodegradable Scaffolds: Calcium Phosphate Bioceramics and Biodegradable Polymers

Calcium phosphate-based synthetic bone is broadly used for the clinical treatment of bone defects caused by trauma and bone tumors. Synthetic bone is easy to use; however, its effects depend on the size and location of the bone defect. Many alternative treatment options are available, such as joint arthroplasty, autologous bone grafting, and allogeneic bone grafting. Although various biodegradable polymers are also being developed as synthetic bone material in scaffolds for regenerative medicine, the clinical application of commercial synthetic bone products with comparable performance to that of calcium phosphate bioceramics have yet to be realized. This review discusses the status quo of bone-regeneration therapy using artificial bone composed of calcium phosphate bioceramics such as β-tricalcium phosphate (βTCP), carbonate apatite, and hydroxyapatite (HA), in addition to the recent use of calcium phosphate bioceramics, biodegradable polymers, and their composites. New research has introduced potential materials such as octacalcium phosphate (OCP), biologically derived polymers, and synthetic biodegradable polymers. The performance of artificial bone is intricately related to conditions such as the intrinsic material, degradability, composite materials, manufacturing method, structure, and signaling molecules such as growth factors and cells. The development of new scaffold materials may offer more efficient bone regeneration.

Preparation of Cu2+/TA/HAP composite coating with anti-bacterial and osteogenic potential on 3D-printed porous Ti alloy scaffolds for orthopedic applications

Because of stress shielding effects, traditional titanium (Ti) alloy scaffolds have a high elastic modulus, which might promote looseness and bone disintegration surrounding the implant, increasing the likelihood of a second surgery. In contrast, 3D-printed porous Ti alloy scaffolds can reduce the scaffold weight while enhancing biocompatibility. Further, these scaffolds' porous nature allows bone tissue ingrowth as well as strong pore connectivity, which can improve nutrient absorption. Nevertheless, bare Ti alloy implants may fail because of inadequate bone integration; hence, adding a coating on the implant surface is an effective technique for improving implant stability. In this study, a composite coating comprising hydroxyapatite (HAP), chitosan (CS), tannic acid (TA) and copper ions (Cu2+) (Cu2+/TA/HAP composite coating) was prepared on the surface of 3D printed porous Ti alloy scaffolds using electrophoretic deposition. Using the standard plate count method, Live/Dead bacteria staining assay, FITC Phalloidin and 4',6-diamidino-2-phenylindole staining assay, and live/dead staining of cells we determined that the composite coating has better antibacterial properties and cytocompatibility as well as lower cytotoxicity. The Alkaline Phosphatase assay revealed that the coating results showed good osteogenesis potential. Overall, the composite coatings produced in this investigation give new potential for the application of Ti alloys in clinics.

Reconstruction of an Extensive Segmental Radial Shaft Bone Defect by Vascularized 3D-Printed Graft Cage

We report here a 46-year-old male patient with a 14 cm segmental bone defect of the radial shaft after third degree open infected fracture caused by a shrapnel injury. The patient underwent fixed-angle plate osteosynthesis and bone reconstruction of the radial shaft by a vascularized 3D-printed graft cage, including plastic coverage with a latissimus dorsi flap and an additional central vascular pedicle. Bony reconstruction of segmental defects still represents a major challenge in musculo-skeletal surgery. Thereby, 3D-printed scaffolds or graft cages display a new treatment option for bone restoration. As missing vascularization sets the limits for the treatment of large-volume bone defects by 3D-printed scaffolds, in the present case, we firstly describe the reconstruction of an extensive radial shaft bone defect by using a graft cage with additional vascularization.

Extreme cases in percutaneous transforaminal endoscopic surgery: case series and brief review of the literature

PURPOSE

Percutaneous transforaminal endoscopic decompression (PTED) is a minimally invasive method of surgical treatment of miscellaneous spinal conditions. We describe our experience with PTED in extreme cases of foraminal stenosis (FS) in adult degenerative scoliosis (ADS), recurrent foraminal stenosis (RFS) after previous open decompression surgery and adjacent segment disease (ASD) after previous lumbar fusion.

METHODS

Twenty-one (21) patients with FS encountered in the clinical framework of ADS (n = 6), previous open decompression surgery (n = 8) and ASD (n = 7) were prospectively reviewed. Patients were preoperatively assessed via clinical and radiologic evaluation. All patients underwent PTED in 2018-2019. Postoperative evaluation was conducted with clinical examination and evaluation of Visual Analogue Scale (VAS), Oswestry Disability Index (ODI) and modified MacNab criteria in predetermined chronic intervals in a 1-2 years follow-up.

RESULTS

All patients were successfully managed with PTED. Operated levels were L3-L4 (19.0%), L4-L5 (52.4%) and L5-S1 (28.6%). No major perioperative complications were recorded. VAS and ODI scores were demonstrated to exhibit a clinically and statistically significant (p < 0.05) amelioration in all patients' categories directly postoperatively, which was preserved until the end of follow-up. Overall outcomes according to modified MacNab criteria were excellent in 12 patients (57.1%), good in 6 (28.6%) and fair in 3 (14.3%) patients.

CONCLUSIONS

PTED is safe and effective in extreme cases of FS encountered in patients with ADS, previous posterior open decompression surgery and ASD after previous spinal fusion.

Maxillary bone augmentation with calvarial bone graft for immediate full-arch rehabilitation: Insights from a 10-year proof-of-concept retrospective analysis

OBJECTIVE

Evaluate the long-term outcomes of full-arch rehabilitation using immediate dental implant placement and continuous functional loading with full-fixed dental prostheses (FFDPs).

MATERIALS AND METHODS

Fifty-six patients received temporary implants (n = 327) at maxillary augmentation with calvarial bone. A provisional acrylic FFDP was immediately loaded onto these implants. After 6 months, the temporary implants were replaced with definitive implants (n = 326) and immediately loaded with a second provisional FFDP (N = 55). Subsequently, a baseline radiograph was taken following a 6-month healing period. The second bridge was then substituted with a definitive FFDP. Primary outcomes included peri-implant marginal bone level (MBL) and definitive implant survival. Secondary outcomes evaluated provisional implant and prostheses survival, complications, and patient satisfaction.

RESULTS

The provisional implants had a survival rate of 97.9%. One patient was excluded from further analysis due to loss of temporary implants and first FFDP. The definitive implant survival rate after 10 years was 92.2%, with a moderate but significant decrease in MBL between baseline radiography and 10 years later (-0.08 ± 0.18 vs. -0.24 ± 0.44). However, large individual variations were observed, with 65.8% of implants showing no bone loss and 9.2% showing loss ≥0.5 mm. Sinusitis was experienced by 14.3% of patients upon surgery. Patient satisfaction was high or reported no issues after protocol completion (80%). One patient lost all six definitive implants and definitive FFDP 8.2 years after implant placement.

CONCLUSIONS

The described protocol can be regarded as a long-term, highly successful method for full-arch rehabilitation of atrophied maxillae while enabling continuous masticatory and speaking functionality.

Biomaterials for bone defect repair: Types, mechanisms and effects

Bone defects or bone discontinuities caused by trauma, infection, tumours and other diseases have led to an increasing demand for bone grafts and biomaterials. Autologous bone grafts, bone grafts with vascular tips, anastomosed vascular bone grafts and autologous bone marrow components are all commonly used in clinical practice, while oversized bone defects require the use of bone tissue engineering-related biomaterials to repair bone defects and promote bone regeneration. Currently, inorganic components such as polysaccharides and bioceramics, as well as a variety of bioactive proteins, metal ions and stem cells can be loaded into hydrogels or 3D printed scaffold materials to achieve better therapeutic results. In this review, we provide an overview of the types of materials, applications, potential mechanisms and current developments in the repair of bone defects.

Biomechanical design optimization of proximal humerus locked plates: A review

BACKGROUND

Proximal humerus locked plates (PHLPs) are widely used for fracture surgery. Yet, non-union, malunion, infection, avascular necrosis, screw cut-out (i.e., perforation), fixation failure, and re-operation occur. Most biomechanical investigators compare a specific PHLP configuration to other implants like non-locked plates, nails, wires, and arthroplasties. However, it is unknown whether the PHLP configuration is biomechanically optimal according to some well-known biomechanical criteria. Therefore, this is the first review of the systematic optimization of plate and/or screw design variables for improved PHLP biomechanical performance.

METHODS

The PubMed website was searched for papers using the terms "proximal humerus" or "shoulder" plus "biomechanics/biomechanical" plus "locked/locking plates". PHLP papers were included if they were (a) optimization studies that systematically varied plate and screw variables to determine their influence on PHLP's biomechanical performance; (b) focused on plate and screw variables rather than augmentation techniques (i.e., extra implants, bone struts, or cement); (c) published after the year 2000 signaling the commercial availability of locked plate technology; and (d) written in English.

RESULTS

The 41 eligible papers involved experimental testing and/or finite element modeling. Plate variables investigated by these papers were geometry, material, and/or position, while screw variables studied were number, distribution, angle, size, and/or threads. Numerical outcomes given by these papers included stiffness, strength, fracture motion, bone and implant stress, and/or the number of loading cycles to failure. But, no paper fully optimized any plate or screw variable for a PHLP by simultaneously applying four well-established biomechanical criteria: (a) allow controlled fracture motion for early callus generation; (b) reduce bone and implant stress below the material's ultimate stress to prevent failure; (c) maintain sufficient bone-plate interface stress to reduce bone resorption (i.e., stress shielding); and (d) increase the number of loading cycles before failure for a clinically beneficial lifespan (i.e., fatigue life). Finally, this review made suggestions for future work, identified clinical implications, and assessed the quality of the papers reviewed.

CONCLUSIONS

Applying biomechanical optimization criteria can assist biomedical engineers in designing or evaluating PHLPs, so orthopaedic surgeons can have superior PHLP constructs for clinical use.

Design, Stereolithographic 3D Printing, and Characterization of TPMS Scaffolds

Anatomical and functional tissue loss is one of the most debilitating problems and involves a great cost to the international health-care sector. In the field of bone tissue, the use of scaffolds to promote tissue regeneration is a topic of great interest. In this study, a combination of additive manufacturing and computational methods led to creating porous scaffolds with complex microstructure and mechanical behavior comparable to those of cancellous bone. Specifically, some representative models of triply periodic minimal surfaces (TPMSs) were 3D-printed through a stereolithographic technique using a dental resin. Schwarz primitive and gyroid surfaces were created computationally: they are characterized by a complex geometry and a high pore interconnectivity, which play a key role in the mechanism of cell proliferation. Several design parameters can be varied in these structures that can affect the performance of the scaffold: for example, the larger the wall thickness, the lower the elastic modulus and compressive strength. Morphological and mechanical analyses were performed to experimentally assess the properties of the scaffolds. The relationship between relative density and elastic modulus has been analyzed by applying different models, and a power-law equation was found suitable to describe the trend in both structures.

Avulsion fracture of the anterior superior iliac crest following autograft for anterior lumbar fusion: case report and literature review

Avulsion fracture of the anterior superior iliac crest (ASIC) following autogenous bone grafting for anterior lumbar fusion (ALF) is an extremely rare complication. We describe a very rare case of avulsion fracture of the ASIC following autograft for ALF in a revision surgery for treating lumbar tuberculosis. A 68-year-old woman with lumbar tuberculosis underwent posterior debridement and posterior iliac crest bone graft fusion; however, her lumbar tuberculosis recurred 9 months after surgery. She then underwent a lumbar revision surgery, including removal of the posterior instrumentation and debridement, followed by anterior L2 corpectomy, debridement, anterior left iliac crest bone graft fusion, and internal fixation. When walking for the first time on postoperative day 3, she experienced a sharp, sudden-onset pain in the anterior iliac crest harvest area. X-ray revealed an avulsion fracture of the ASIC. Considering her failure to respond to conservative treatment for one week and large displacement of the fracture ends, an open reduction and internal fixation surgery was scheduled. Her pain symptoms were significantly relieved after the operation. Although rare, fracture of the ASIC following autograft for ALF should not be ignored. Fracture of the ASIC is usually treated conservatively. Additional surgical treatment is required only when intractable pain fails to respond to conservative treatment or when there is a large displacement of fracture ends that are not expected to heal spontaneously.

Giant Ulcer with Necrosis on Right Vulva, Groin, and Thigh-- A Case of Necrotizing Fasciitis Associated with Erythematous Pemphigus

Necrotizing fasciitis is a rare, severe, rapidly progressing disease with a high mortality rate. We report a case of a 72-year female with erythematous pemphigus who developed erythema, swelling and ulceration on right vulva, groin, and thigh. The early clinical manifestations of the patient were nonspecific and easily misdiagnosed as cellulitis. However, upon the occurrence of ulceration and necrosis, deep fungal infection, pyoderma gangrenosum or lymphoproliferative disorders were considered. The pathology suggested IgG4-related diseases, plasmacytoma et al. But at last, surgical exploration and postoperative pathology confirmed the diagnosis of necrotizing fasciitis. The patient recovered after multiple aggressive surgical debridement procedures and antibiotic therapy and the patient has been followed up for 2 years without recurrence. Clinicians should be vigilant about the possibility of necrotizing fasciitis in patients with erythema, pain, rapid ulceration of skin and soft tissue, particularly in immunocompromised individuals with long-term use of immunosuppressive agents. It is crucial for saving life by early multi-disciplinary consultation, prompt diagnosis, and aggressive treatment.

Safety and efficacy of autologous bone marrow clot as a multifunctional bioscaffold for instrumental posterior lumbar fusion: a 1-year follow-up pilot study

Background

Bone marrow aspirate (BMA), when combined with graft substitutes, has long been introduced as a promising alternative to iliac crest bone graft in spinal fusion. However, the use of BMA is limited by the absence of a standardized procedure, a structural texture, and the potential for diffusion away from the implant site. Recently, the potential use of a new formulation of BMA, named BMA clot, has been preclinically described. In this report, we present the results of a prospective pilot clinical study aimed at evaluating the safety and efficacy of autologous vertebral BMA (vBMA) clot as a three-dimensional and multifunctional bioscaffold in instrumented posterior lumbar fusion.

Methods

Ten consecutive patients with an indication of multilevel (≤5) posterior spinal fusion due to lumbar spine degenerative diseases were included in the study and treated with vBMA. Clinical outcomes were assessed using the Visual Analog Scale (VAS), Oswestry Disability Index (ODI), and EuroQoL-5L (EQ-5L) preoperatively and at 3 months and 12 months after spinal fusion. Bone fusion quality was evaluated at the 12-month follow-up using the Brantigan classification on radiography (XR) imaging. Bone density was measured on computed tomography (CT) scans at 6 and 12 months of follow-up visits at the intervertebral arches and intervertebral joint areas and expressed in Hounsfield unit (HU).

Results

The results indicate a successful posterolateral fusion rate of approximately 100% (considering levels with C, D, and E grades according to the Brantigan classification) at the 12-month follow-up, along with an increase in bone density from 6 to 12 months of follow-up. An improvement in the quality of life and health status following surgery, as assessed by clinical scores (ODI, VAS, and EQ-5L), was also observed as early as 3 months postsurgery. No adverse events related to the vBMA clot were reported.

Conclusion

This prospective pilot study demonstrates the effectiveness and safety profile of vBMA clot as an advanced bioscaffold capable of achieving posterior lumbar fusion in the treatment of degenerative spine diseases. This lays the groundwork for a larger randomized clinical study.

Examining the Forearm Intersection through Palpation and Ultrasonography

BACKGROUND

Forearm intersection syndrome causes pain, swelling, and a rub at the dorsal distal forearm where the first extensor compartment muscles intersect with the second compartment tendons. Although primary care settings tend to treat mild cases, high-performance athletes may suffer from severe symptoms that require surgery. This proof-of-concept study aims to help detect the anatomical substrate of forearm intersection syndrome using palpation and ultrasonography when available.

METHODS

Five individuals were studied using independent palpation and ultrasonography to identify the first dorsal compartment muscles and the second dorsal compartment tendons. The distances between the dorsal (Lister's) tubercle of the radius and the ulnar and radial edges of the first dorsal compartment muscles were measured to determine the location and extent of the muscle-tendon intersection. The palpatory and ultrasonographic measurements were compared using descriptive statistics and the paired t-test.

RESULTS

The mean distances from the dorsal tubercle of the radius to the ulnar and radial borders of the first dorsal compartment muscles were 4.0 cm (SE 0.42) and 7.7 cm (SE 0.56), respectively, based on palpation. By ultrasonography, the corresponding distances were 3.5 cm (SD 1.05, SE 0.47) and 7.0 cm (SD 1.41, SE 0.63). Both methods showed a similar overlap length. However, ultrasonography revealed a shorter distance between the dorsal tubercle of the radius and the ulnar border of the first compartment than palpation (p = 0.0249).

CONCLUSIONS

Our findings indicate that a basic knowledge of anatomy should help health professionals diagnose forearm intersection syndrome through palpation and, if available, ultrasonography.

Sensorimotor Dysfunction Following Anterior Cruciate Ligament Reconstruction- an Afferent Perspective: A Scoping Review

Background

Sensorimotor dysfunction is thought to occur following anterior cruciate ligament (ACL) injury which may have implications on future reinjury risk. Dysfunction has been demonstrated within the efferent component of the sensorimotor system. However, no reviews have examined the two main components of the afferent system: the visual and somatosensory systems.

Hypothesis/Purpose

This study aimed to report differences in function (central processing and local processing) within the (1) somatosensory and (2) visual systems between individuals following anterior cruciate ligament reconstruction (ACLR) and healthy controls (between-subject). The study also aimed to report differences in function within the two systems between the two limbs of an individual following ACLR (within-subject).

Study Design

Scoping review.

Methods

A search was conducted in PubMed, SPORTDiscus, CINAHL, Medline and Embase up until September 2021. Level I-IV studies assessing somatosensory and visual systems were included if they compared ACLR limbs to the uninjured contralateral limb (within-subject) or a healthy control limb (between-group). The function of somatosensory and visual systems was assessed across both central processing (processing of information in the central cortex) and local processing (all other assessments outside of central processing of information).

Results

Seventy studies were identified (52 somatosensory, 18 visual). Studies examining somatosensory central processing demonstrated significant differences; 66% of studies exhibited within-subject differences and 100% of the studies exhibited between-group differences. Studies examining local somatosensory processing had mixed findings; 40% of the 'joint position sense (JPS)' and 'threshold to detect motion (TTDM)' studies showed significant within-subject differences (JPS=0.8°-3.8° and TTDPM=0.2°-1.4°) and 42% demonstrated significant between-group differences (JPS=0.4°-5° and TTDPM=0.3°-2.8°). Eighty-three percent of visual central processing studies demonstrated significant dysfunction between-groups with no studies assessing within-subject differences. Fifty percent of the studies examining local visual processing demonstrated a significant between-group difference.

Conclusion

Significant differences in central processing exist within somatosensory and visual systems following ACLR. There is mixed evidence regarding local somatosensory and visual processing. Increased compensation by the visual system and local visual processing dysfunction may occur in conjunction with somatosensory dysfunction.

Effect of adjuvant autologous platelet concentrates on secondary repair of alveolar clefts: A systematic review and meta-analysis

OBJECTIVE

To review the existing evidence on the adjuvant use of autologous platelet concentrates (APCs) with iliac crest bone graft (ICBG) in the reconstruction of the secondary alveolar cleft.

METHODS

Electronic databases were searched systematically until November 2022. Clinical trials comparing the three-dimensional radiological outcomes of patients who underwent secondary alveolar bone grafting (SABG) with ICBG and APCs to those with ICBG alone and the radiological outcomes assessed 6 months after surgery were included. Two authors performed the study selection and the assessment of the risk of bias. Meta-analysis was performed using the random-effects model to determine the risk ratio (RR) for developing wound dehiscence and the mean difference (MD) with a 95% confidence interval (CI) for the percentage of newly formed bone.

RESULTS

Nine studies (seven RCT and two CCT) were included with a low to high risk of bias. At the 6-month follow-up, the study group revealed insignificant results regarding the percentage of newly formed bone (MD = 6.49; 95% CI: -0.97, 13.94; p = .09; χ2  = 0.01; I2  = 71%). In addition, the overall risk of developing wound dehiscence was lower in the study group (RR = 0.34; 95% CI: 0.15, 0.78; p = .01; χ2  = 0.67; I2  = 0%).

CONCLUSION

Currently, there is insufficient evidence to support the adjuvant use of APCs with ICBG on enhanced bone regeneration following secondary alveolar bone grafting. However, combining ICBG and APCs might be beneficial in reducing the risk of developing wound dehiscence.

All-Arthroscopic Glenoid Bone Augmentation Using Iliac Crest Autograft Procedure for Recurrent Anterior Shoulder Instability: Button Fixation Is a Feasible and Satisfactory Alternative to Screw Fixation

PURPOSE

To investigate the efficacy of all-arthroscopic glenoid bone augmentation surgery using the iliac crest autograft procedure. Furthermore, we sought to compare the clinical and radiographic outcomes of using screw versus button fixation, in patients with recurrent anterior shoulder instability.

METHODS

Between 2015 and 2019, 134 shoulders with persistent instability were surgically treated with an arthroscopically placed autologous iliac crest bone graft transfer procedure. Preoperative and postoperative clinical follow-up data were evaluated using the range of motion, and the Walch-Duplay, American Shoulder and Elbow Society, and Rowe scores. Radiologic assessment on 3-dimensional computed tomography scans was performed preoperatively, immediately after surgery, as well as postoperatively, at 3 months, 6 months, 1 year, and at the final follow-up stage. Graft positions, healing, and resorption were evaluated from postoperative images.

RESULTS

This study included 102 patients who underwent arthroscopic iliac crest bone grafting procedure with 2 screws fixation (n = 37; group 1) and 2 button fixation (n = 65; group 2). The mean follow-up period was 37 months. There were no significant differences between groups in terms of clinical scores, shoulder motion range, graft healing, or graft positions on computed tomography scans (P>.05). In group 1, 1 patient showed mechanical irritation and persistent pain around the screw insertion site, being treated through the arthroscopic removal of the screws. The average postoperative bony resorption percentages were 20.3% and 11.2% at 6 months, and 32.4% and 19.3% at 12 months, in group 1 and group 2, respectively. A statistically significant difference was detected between the two groups (P<.05).

CONCLUSIONS

In the arthroscopic iliac crest bone grafting procedure for the treatment of chronic osseous anterior shoulder instability, excellent functional results were obtained after both button fixation and screw fixation techniques. In addition, less graft resorption and no hardware-related complications were detected with suture button fixation technique.

LEVEL OF EVIDENCE

Level III, retrospective comparative therapeutic trial.

Phenolated alginate hydrogel induced osteogenic properties of mesenchymal stem cells via Wnt signaling pathway

Osteogenic properties of phenolated alginate (1.2 %) hydrogel containing collagen (0.5 %)/nano-hydroxyapatite (1 %) were studied on human mesenchymal stem cells in vitro. The phenolation rate and physical properties of the hydrogel were assessed using nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), swelling ratio, gelation time, mechanical assay, and degradation rate. The viability of encapsulated cells was monitored on days 7, 14, and 21 using an MTT assay. Osteoblast differentiation was studied using western blotting, and real-time PCR. Using PCR array analysis, the role of the Wnt signaling pathway was also investigated. Data showed that the combination of alginate/collagen/nanohydroxyapatite yielded proper mechanical features. The addition of nanohydroxyapatite, and collagen reduced degradation, swelling rate coincided with increased stiffness. Elasticity and pore size were also diminished. NMR and FTIR revealed suitable incorporation of collagen and nanohydroxyapatite in the structure of alginate. Real-time PCR analysis and western blotting indicated the expression of osteoblast-related genes such as Runx2 and osteocalcin. PCR array revealed the induction of numerous genes related to Wnt signaling pathways during the maturation of human stem cells toward osteoblast-like cells. In vivo data indicated that transplantation of phenolated alginate/collagen/nanohydroxyapatite hydrogel led to enhanced de novo bone formation in rats with critical-sized calvarial defects. Phenolated alginate hydrogel can promote the osteogenic capacity of human amniotic membrane mesenchymal stem cells in the presence of nanohydroxyapatite and collagen via engaging the Wnt signaling pathway.

Exercise-induced fatigue affects knee proprioceptive acuity and quadriceps neuromuscular function more in patients with ACL reconstruction or meniscus surgery than in healthy individuals

PURPOSE

To observe how knee proprioceptive acuity and quadriceps neuromuscular function change during and after repeated isokinetic knee-extension exercise in patients with anterior cruciate ligament reconstruction (ACLR) or meniscus surgery.

METHODS

Patients with ACLR or meniscus surgery and matched controls (n = 19 in each group) performed knee-flexion replication at 15° and 75°, and quadriceps peak torque (PT), central activation ratio (CAR) and rate of torque development (RTD) at baseline and immediately after every five sets of isokinetic knee-extension exercise (times 1-5).

RESULTS

Compared to the baseline, the ACLR and control groups displayed errors in knee-flexion replication at 75° only at time 5 (115.9-155.6%; p ≤ 0.04, d ≥ 0.97), whereas the meniscus surgery group exhibited errors at all time points (142.5-265.6%; p ≤ 0.0003, d ≥ 1.4). Significant percentage reductions in quadriceps CAR were observed between times 4 and 5 in the ACLR group (-5.8%; p = 0.0002, d = 0.96), but not in the meniscus surgery (-1.4%; n.s.) and control (0.1%; n.s.) groups. Significant percentage reductions in quadriceps RTD were observed between times 4 and 5 in the ACLR (-24.2%; p = 0.007, d = 0.99) and meniscus surgery (-23.0%; p = 0.01, d = 0.85) groups, but not in the control group (-0.2%; n.s.).

CONCLUSION

Patients with ACLR or meniscus surgery displayed a greater loss in knee proprioceptive acuity and quadriceps neuromuscular function during and after exercise than healthy individuals. Evidence-based interventions to enhance exercise-induced fatigue resistance should be implemented following ACLR or meniscus surgery, aiming to prevent proprioceptive and neuromuscular changes within the knee joint and quadriceps.

LEVEL OF EVIDENCE

III.