Clinical Applications of 3D Printing: Primer for Radiologists

The Use of 3D Printing in Fetal Surgery for Surgical Planning: A Scoping Review

Objectives: We sought to identify in which clinical scenarios 3D printed models are used to plan for fetal surgeries as well as the main purpose and the imaging method utilized for the models. In addition, we describe benefits and shortcomings of the models, as well as potential future improvements. Methods: In this scoping review, data were collected retrospectively from scientific databases (PubMed, Embase, Cochrane CENTRAL, CINAHL, Scopus, and the Web of Science platform) and screened by title, abstract, and full text against strict criteria. The inclusion criteria required the study be performed on a live fetus and involve 3D models used for fetal surgery. The models must have been designed from diagnostic imaging modalities such as CT, MRI, or ultrasound. The articles considered include clinical trials, review articles, cohort studies, case series, case reports, and conference abstracts. Results: Of the initial 742 articles collected, six met the inclusion criteria. Spina bifida and EXIT procedures were the most frequent use cases that inspired surgeons to print models for surgical planning. The ability to view patient-specific anatomy in a 3D handheld model was often touted as providing a great benefit to the surgical team's ability to anticipate intraoperative challenges. Conclusions: Three-dimensional printing models have been applied to plan for fetal surgeries, more specifically, for EXIT procedures and fetoscopic surgical repair of spina bifida. The potential benefits of 3D printing in fetal surgery are enormous.

Research trends of bone tumor treatment with 3D printing technology from 2013 to 2022: a bibliometric analysis

OBJECTIVE

Bibliometrics was employed in this study to determine the research trends in the worldwide application of 3D printing technology to treat bone tumors over the previous 10 years.

METHODS

Published from 2013 to 2022, the papers related to bone tumors treated with 3D printing were located in Web of Science Core Collection (WoSCC), PubMed, and Scopus. The screened articles were included in this bibliometric study. From these papers in WoSCC, information on annual publications, journals, keywords, countries, authors, institutions, and cited references were extracted and visualized with CiteSpace (version 6.1.R6) software to investigate the state of bone tumor treatment using 3D printing as well as research hotspots. The Carrot2 online visualization tool and Vosviewer software (version 1.6.20) were employed to visualize the publications from PubMed and Scopus, respectively, in order to ascertain the most popular research topics from both databases.

RESULTS

A total of 606, 233, and 364 publications were obtained from WoSCC, PubMed, and Scopus, respectively, between the years 2013 and 2022. In WoSCC, the peak number of publications was found in 2021, with 145 publications published. Acta Biomaterialia (11 publications) and World Neurosurgery (10 publications) were the most prolific journals, and Biomaterials was the journal cited the most (244 times). Yong Zhou was the most productive author with 14 publications, while Kwok-Chuen Wong (69 citations) and William F Enneking, (69 citations) possessed the most citations. The country with the largest quantity of publications was China (207). Among all institutions, Shanghai Jiao Tong University produced the most publications (29). Rapid prototyping was the keyword with the strongest citation burst (4.73). 'Reconstruction', 'surgery', 'resection', and 'design' caught the significant attention of researchers. 3D-printed materials, pelvic reconstruction, mandibular reconstruction, computer-assisted surgical techniques, photothermal therapy, and in vitro experiments were recognized as hot subjects and trends in current research. The most frequently occurring topics in Scopus are not significantly different from those found in WoSCC. The most prevalent research areas in PubMed encompass implant, patient-specific, bioceramic, models, and pelvic.

Three-dimensional models of physeal fractures in the femur for the teaching of veterinary medicine

PURPOSE

To develop and assess three-dimensional models of physeal fractures in dog femurs (3D MPFDF) using radiographic imaging.

METHODS

The study was conducted in three phases: development of 3D MPFDF; radiographic examination of the 3D MPFDF; and comparative analysis of the anatomical and radiographic features of the 3D MPFDF.

RESULTS

The base model and the 3D MPFDF achieved high fidelity in replicating the bone structures, accurately maintaining the morphological characteristics and dimensions such as length, width, and thickness, closely resembling natural bone. The radiographs of the 3D MPFDF displayed distinct radiopaque and radiolucent areas, enabling clear visualization of the various anatomical structures of the femur. However, in these radiographs, it was challenging to distinguish between the cortical and medullary regions due to the use of 99% internal padding in the printing process. Despite this limitation, the radiographs successfully demonstrated the representation of the Salter-Harris classification.

CONCLUSIONS

This paper presents a pioneering project focused on technological advancement aimed at developing a method for the rapid and cost-effective production of three-printed models and radiographs of physeal fractures in dogs.

Advances in 3D bioprinting for urethral tissue reconstruction

Urethral conditions affect children and adults, increasing the risk of urinary tract infections, voiding and sexual dysfunction, and renal failure. Current tissue replacements differ from healthy urethral tissues in structural and mechanical characteristics, causing high risk of postoperative complications. 3D bioprinting can overcome these limitations through the creation of complex, layered architectures using materials with location-specific biomechanical properties. This review highlights prior research and describes the potential for these emerging technologies to address ongoing challenges in urethral tissue engineering, including biomechanical and structural mismatch, lack of individualized repair solutions, and inadequate wound healing and vascularization. In the future, the integration of 3D bioprinting technology with advanced biomaterials, computational modeling, and 3D imaging could transform personalized urethral surgical procedures.

A 3D-Printed Dummy for Training Distal Phalanx Amputation in Mice

The development of realistic dummies for training the distal phalanx amputation (DPA) technique in mouse pups is a promising alternative to reduce and replace animals in training for research and teaching. To test this, we obtained micro-CT data from postnatal day-five mouse pups, meticulously segmented them, and converted them into a 3D mesh format suitable for 3D printing. Once the dummy was printed, it was evaluated during actual training courses in two different groups: in the first group, users received no dummies to train the DPA, and in the second group, users were trained with three dummies. To assess the effectiveness of the dummy, we conducted a survey followed by an expert veterinarian evaluation. Our results showed that DPA is a complex procedure, and it is commonly poorly performed. When implementing the dummies, users who were not provided with dummies to practice only had an 8.3% success rate in DPA, while users provided with three dummies had a 45.5% success rate, respectively. Despite additional research being needed, our dummy offered improved practical training by providing a safe and effective alternative in line with ethical considerations while demonstrating the feasibility of using 3D printing technology to promote the 3Rs in experimental research.

Brachytherapy and 3D printing for skin cancer: A review paper

Brachytherapy is a type of radiation therapy, in which a radiation source is placed directly or close to a tumor. It is commonly used to treat skin cancer, and enables precise irradiation treatment of affected area (planning target volume - PTV) while minimizing exposure dose to surrounding healthy tissue (organs at risk - OARs). Recently, the use of 3D printing has begun revolutionizing brachytherapy, as it allows manufacturing of custom-designed applicators for unique shape of skin topography, tumor, and surrounding tissues. Outcome of the combination of 3D printing and brachytherapy has several advantages over traditional treatment planning methods. Some of the advantages are intuitive, whereas others can be concluded from a literature overview as follows: 1) Possibility of developing patient-specific applicators that precisely match the shape of tumor area; 2) Reduction of the time required for applicator production, especially when custom-made devices are needed; 3) Reduction of manufacturing costs; 4) Treatment procedures improvement; 5) Improvement of safety measures accelerated by the development of smart materials (e.g., polymer filaments with admixture of heavy elements); 6) Possibility of nearly instant adjustment into tumor treatment (applicators can be changed as the tumor is changing its shape); and 7) Applicators designed to securely fit to treatment area to hold radioactive source always in the same place for each fraction. Consequently, tumor-provided dose is accurate and leads to effective treatment. In this review paper, we investigated the current state-of-the-art of the application of 3D printing in brachytherapy. A number of existing reports were chosen and reviewed in terms of printing technology, materials used, treatment effectiveness, and fabrication protocols. Furthermore, the development of future directions that should be considered by collaborative teams bridging different fields of science, such as medicine, physics, chemistry, and material science were summarized. With the indicated topics, we hope to stimulate the innovative progress of 3D printing technology in brachytherapy.

Setting up a biomodeling, virtual planning, and three-dimensional printing service in Uruguay

Virtual surgical planning and three-dimensional (D) printing are rapidly becoming essential for challenging and complex surgeries around the world. An Ibero-American survey reported a lack of awareness of technology benefits and scarce financial resources as the two main barriers to widespread adoption of 3-D technologies. The Pereira Rossell Hospital Center is a publicly funded maternal and pediatric academic clinical center in Uruguay, a low-resource Latin American country, that successfully created and has been running a 3-D unit for 4 years. The present work is a step-by-step review of the 3-D technology implementation process in a hospital with minimal financial investment. References to training, software, hardware, and the management of human resources are included. Difficulties throughout the process and future challenges are also discussed.

Open-source versatile 3D-print animal conditioning platform design for in vivo preclinical brain imaging in awake mice and anesthetized mice and rats

Proper animal conditioning is a key factor in the quality and success of preclinical neuroimaging applications. Here, we introduce an open-source easy-to-modify multimodal 3D printable design for rodent conditioning for magnetic resonance imaging (MRI) or other imaging modalities. Our design can be used for brain imaging in anesthetized or awake mice, and in anesthetized rats. We show ease of use and reproducibility of subject conditioning with anatomical T2-weighted imaging for both mice and rats. We also demonstrate the application of our design for awake functional MRI in mice using both visual evoked potential and olfactory stimulation paradigms. In addition, using a combined MRI, positron emission tomography and X-ray computed tomography experiment, we demonstrate that our proposed cradle design can be utilized for multiple imaging modalities.

Potential Applications and Additive Manufacturing Technology-Based Considerations of Mesoporous Silica: A Review

Nanoporous materials are categorized as microporous (pore sizes 0.2-2 nm), mesoporous (pore sizes 2-50 nm), and macroporous (pore sizes 50-1000 nm). Mesoporous silica (MS) has gained a significant interest due to its notable characteristics, including organized pore networks, specific surface areas, and the ability to be integrated in a variety of morphologies. Recently, MS has been widely accepted by range of manufacturer and as drug carrier. Moreover, silica nanoparticles containing mesopores, also known as mesoporous silica nanoparticles (MSNs), have attracted widespread attention in additive manufacturing (AM). AM commonly known as three-dimensional printing is the formalized rapid prototyping (RP) technology. AM techniques, in comparison to conventional methods, aid in reducing the necessity for tooling and allow versatility in product and design customization. There are generally several types of AM processes reported including VAT polymerization (VP), powder bed fusion (PBF), sheet lamination (SL), material extrusion (ME), binder jetting (BJ), direct energy deposition (DED), and material jetting (MJ). Furthermore, AM techniques are utilized in fabrication of various classified fields such as architectural modeling, fuel cell manufacturing, lightweight machines, medical, and fabrication of drug delivery systems. The review concisely elaborates on applications of mesoporous silica as versatile material in fabrication of various AM-based pharmaceutical products with an elaboration on various AM techniques to reduce the knowledge gap.

Empowering Precision Medicine: The Impact of 3D Printing on Personalized Therapeutic

This review explores recent advancements and applications of 3D printing in healthcare, with a focus on personalized medicine, tissue engineering, and medical device production. It also assesses economic, environmental, and ethical considerations. In our review of the literature, we employed a comprehensive search strategy, utilizing well-known databases like PubMed and Google Scholar. Our chosen keywords encompassed essential topics, including 3D printing, personalized medicine, nanotechnology, and related areas. We first screened article titles and abstracts and then conducted a detailed examination of selected articles without imposing any date limitations. The articles selected for inclusion, comprising research studies, clinical investigations, and expert opinions, underwent a meticulous quality assessment. This methodology ensured the incorporation of high-quality sources, contributing to a robust exploration of the role of 3D printing in the realm of healthcare. The review highlights 3D printing's potential in healthcare, including customized drug delivery systems, patient-specific implants, prosthetics, and biofabrication of organs. These innovations have significantly improved patient outcomes. Integration of nanotechnology has enhanced drug delivery precision and biocompatibility. 3D printing also demonstrates cost-effectiveness and sustainability through optimized material usage and recycling. The healthcare sector has witnessed remarkable progress through 3D printing, promoting a patient-centric approach. From personalized implants to radiation shielding and drug delivery systems, 3D printing offers tailored solutions. Its transformative applications, coupled with economic viability and sustainability, have the potential to revolutionize healthcare. Addressing material biocompatibility, standardization, and ethical concerns is essential for responsible adoption.

3D printing in the endovascular treatment of visceral artery aneurysms

Visceral artery aneurysms (VAAs) are vascular pathologies that are difficult to treat. The variable geometry of the vessels and the location of aneurysms render difficult their evaluation in radiological imaging studies. Less invasive endovascular procedures are increasingly used in common practice. Our aim was to test the feasibility of using 3D printing technology in the preparation of preoperative spatial models of visceral artery aneurysms and their impact on interventional treatment. In our observational study, we examined a group of patients with true aneurysms of the visceral arteries who were followed and who underwent endovascular procedures with the use of 3D prints for better imaging of vascular lesions. We analyzed the fused filament fabrication method of 3D printing and printable materials in the preparation of spatial vascular models. We confirmed that more accurate visualization and analysis of vascular anatomy could assist operators in attempting minimally invasive treatment with good results. Extending imaging studies using 3D printing models that allow for the assessment of the position, morphology and geometry of the aneurysm sac, particularly of vessel branches, could encourage surgeons to perform endovascular procedures.

Reverse Engineering and 3D Printing of Medical Devices for Drug Delivery and Drug-Embedded Anatomic Implants

In recent years, 3D printing (3DP) has advanced traditional medical treatments. This review explores the fusion of reverse engineering and 3D printing of medical implants, with a specific focus on drug delivery applications. The potential for 3D printing technology to create patient-specific implants and intricate anatomical models is discussed, along with its ability to address challenges in medical treatment. The article summarizes the current landscape, challenges, benefits, and emerging trends of using 3D-printed formulations for medical implantation and drug delivery purposes.

Role of Three-Dimensional Printing in Treatment Planning for Orthognathic Surgery: A Systematic Review

Three-dimensional (3D) printing refers to a wide range of additive manufacturing processes that enable the construction of structures and models. It has been rapidly adopted for a variety of surgical applications, including the printing of patient-specific anatomical models, implants and prostheses, external fixators and splints, as well as surgical instrumentation and cutting guides. In comparison to traditional methods, 3D-printed models and surgical guides offer a deeper understanding of intricate maxillofacial structures and spatial relationships. This review article examines the utilization of 3D printing in orthognathic surgery, particularly in the context of treatment planning. It discusses how 3D printing has revolutionized this sector by providing enhanced visualization, precise surgical planning, reduction in operating time, and improved patient communication. Various databases, including PubMed, Google Scholar, ScienceDirect, and Medline, were searched with relevant keywords. A total of 410 articles were retrieved, of which 71 were included in this study. This article concludes that the utilization of 3D printing in the treatment planning of orthognathic surgery offers a wide range of advantages, such as increased patient satisfaction and improved functional and aesthetic outcomes.

Enhancing medical education in respiratory diseases: efficacy of a 3D printing, problem-based, and case-based learning approach

OBJECTIVES

The present study aims to investigate the efficacy of utilizing three-dimensional (3D) printing technology in concert with Problem-Based Learning (PBL) and Case-Based Learning (CBL) pedagogical approaches in educating senior undergraduate clinical medical students on respiratory diseases.

METHODS

A cohort of 422 fourth-year clinical medicical students of from Anhui Medical University, pursuing a five-year program, were arbitrarily segregated into two distinct groups. The experimental group was subjected to a combined pedagogical approach, which included 3D printing technology, PBL and CBL (referred to as DPC). Conversely, the control group was exposed to conventional teaching methodologies for respiratory disease education. The effectiveness of the teaching methods was subsequently appraised using both theoretical test scores and custom questionnaires.

RESULTS

Post-quiz scores indicated a statistically significant improvement in the DPC group as compared to the traditional group (P < 0.01). Self-evaluation and satisfaction questionnaires revealed that the DPC group's self-assessment scores outperformed the traditional group in several aspects, including clinical thinking ability, learning initiative, self-study ability, anatomical knowledge mastery, confidence in learning, ability to analyze and solve problems, comprehension of the knowledge, help to clinical thinking and level of satisfaction on the teaching methods (P < 0.01). However, within the unsatisfied DPC sub-group, none of these self-assessment aspects, except for comprehension of the knowledge, impacted the learning efficacy (P > 0.05).

CONCLUSION

The deployment of the DPC pedagogical approach may confer unique experiential learning opportunities for students, potentially enhancing theoretical test scores and promoting self-evaluation and satisfaction in the context of respiratory disease education. Hence, it may be instrumental in augmenting the overall teaching efficacy.

Medical 3D Printing Using Desktop Inverted Vat Photopolymerization: Background, Clinical Applications, and Challenges

Medical 3D printing is a complex, highly interdisciplinary, and revolutionary technology that is positively transforming the care of patients. The technology is being increasingly adopted at the Point of Care (PoC) as a consequence of the strong value offered to medical practitioners. One of the key technologies within the medical 3D printing portfolio enabling this transition is desktop inverted Vat Photopolymerization (VP) owing to its accessibility, high quality, and versatility of materials. Several reports in the peer-reviewed literature have detailed the medical impact of 3D printing technologies as a whole. This review focuses on the multitude of clinical applications of desktop inverted VP 3D printing which have grown substantially in the last decade. The principles, advantages, and challenges of this technology are reviewed from a medical standpoint. This review serves as a primer for the continually growing exciting applications of desktop-inverted VP 3D printing in healthcare.

3D printing exposure and perception in radiology residency: survey results of radiology chief residents

RATIONALE AND OBJECTIVES

The purpose of this study is to summarize a survey of radiology chief residents focused on 3D printing in radiology.

MATERIALS AND METHODS

An online survey was distributed to chief residents in North American radiology residencies by subgroups of the Association of University Radiologists. The survey included a subset of questions focused on the clinical use of 3D printing and perceptions of the role of 3D printing and radiology. Respondents were asked to define the role of 3D printing at their institution and asked about the potential role of clinical 3D printing in radiology and radiology residencies.

RESULTS

152 individual responses from 90 programs were provided, with a 46% overall program response rate (n = 90/194 radiology residencies). Most programs had 3D printing at their institution (60%; n = 54/90 programs). Among the institutions that perform 3D printing, 33% (n = 18/54) have structured opportunities for resident contribution. Most residents (60%; n = 91/152 respondents) feel they would benefit from 3D printing exposure or educational material. 56% of residents (n = 84/151) believed clinical 3D printing should be centered in radiology departments. 22% of residents (n = 34/151) believed it would increase communication and improve relationships between radiology and surgery colleagues. A minority (5%; 7/151) believe 3D printing is too costly, time-consuming, or outside a radiologist's scope of practice.

CONCLUSIONS

A majority of surveyed chief residents in accredited radiology residencies believe they would benefit from exposure to 3D printing in residency. 3D printing education and integration would be a valuable addition to current radiology residency program curricula.

Utilizing 3D printing to assist pre-procedure planning of transjugular intrahepatic portosystemic shunt (TIPS) procedures: a pilot study

BACKGROUND

3D (three-dimensional) printing has been adopted by the medical community in several ways, procedure planning being one example. This application of technology has been adopted by several subspecialties including interventional radiology, however the planning of transjugular intrahepatic portosystemic shunt (TIPS) placement has not yet been described. The impact of a 3D printed model on procedural measures such as procedure time, radiation exposure, intravascular contrast dosage, fluoroscopy time, and provider confidence has also not been reported.

METHODS

This pilot study utilized a quasi-experimental design including patients who underwent TIPS. For the control group, retrospective data was collected on patients who received a TIPS prior to Oct 1, 2020. For the experimental group, patient-specific 3D printed models were integrated in the care of patients that received TIPS between Oct 1, 2020 and April 15, 2021. Data was collected on patient demographics and procedural measures. The interventionalists were surveyed on their confidence level and model usage following each procedure in the experimental group.

RESULTS

3D printed models were created for six TIPS. Procedure time (p = 0.93), fluoroscopy time (p = 0.26), and intravascular contrast dosage (p = 0.75) did not have significant difference between groups. Mean radiation exposure was 808.8 mGy in the group with a model compared to 1731.7 mGy without, however this was also not statistically significant (p = 0.09). Out of 11 survey responses from interventionists, 10 reported "increased" or "significantly increased" confidence after reviewing the 3D printed model and all responded that the models were a valuable tool for trainees.

CONCLUSIONS

3D printed models of patient anatomy can consistently be made using consumer-level, desktop 3D printing technology. This study was not adequately powered to measure the impact that including 3D printed models in the planning of TIPS procedures may have on procedural measures. The majority of interventionists reported that patient-specific models were valuable tools for teaching trainees and that confidence levels increased as a result of model inclusion in procedure planning.

Sterilization of PLA after Fused Filament Fabrication 3D Printing: Evaluation on Inherent Sterility and the Impossibility of Autoclavation

Three-dimensional printing, especially fused filament fabrication (FFF), offers great possibilities in (bio-)medical applications, but a major downside is the difficulty in sterilizing the produced parts. This study evaluates the questions of whether autoclaving is a possible solution for FFF-printed parts and if the printer itself could be seen as an inherent sterilization method. In a first step, an investigation was performed on the deformation of cylindrically shaped test parts after running them through the autoclaving process. Furthermore, the inherent sterility possibilities of the printing process itself were evaluated using culture medium sterility tests. It could be shown that, depending on the needed accuracy, parts down to a diameter of 5-10 mm can still be sterilized using autoclaving, while finer parts suffer from major deformations. For these, inherent sterilization of the printer itself is an option. During the printing process, over a certain contact time, heat at a higher level than that used in autoclaving is applied to the printed parts. The contact time, depending on the printing parameters, is calculated using the established formula. The results show that for stronger parts, autoclaving offers a cheap and good option for sterilization after FFF-printing. However, the inherent sterility possibilities of the printer itself can be considered, especially when printing with small layer heights for finer parts.

Advanced 3D Visualization and 3D Printing in Radiology

Since the discovery of X-rays in 1895, medical imaging systems have played a crucial role in medicine by permitting the visualization of internal structures and understanding the function of organ systems. Traditional imaging modalities including Computed Tomography (CT), Magnetic Resonance Imaging (MRI) and Ultrasound (US) present fixed two-dimensional (2D) images which are difficult to conceptualize complex anatomy. Advanced volumetric medical imaging allows for three-dimensional (3D) image post-processing and image segmentation to be performed, enabling the creation of 3D volume renderings and enhanced visualization of pertinent anatomic structures in 3D. Furthermore, 3D imaging is used to generate 3D printed models and extended reality (augmented reality and virtual reality) models. A 3D image translates medical imaging information into a visual story rendering complex data and abstract ideas into an easily understood and tangible concept. Clinicians use 3D models to comprehend complex anatomical structures and to plan and guide surgical interventions more precisely. This chapter will review the volumetric radiological techniques that are commonly utilized for advanced 3D visualization. It will also provide examples of 3D printing and extended reality technology applications in radiology and describe the positive impact of advanced radiological image visualization on patient care.

Feasibility of Customized Pillboxes to Enhance Medication Adherence: A Randomized Controlled Trial

OBJECTIVE

To test the (1) feasibility of an assistive technology based pillbox intervention on medication adherence; (2) feasibility of trial procedures; and (3) preliminary effectiveness of the pillbox intervention on medication adherence.

DESIGN

A single-blinded randomized controlled clinical trial was conducted during 2-4 weeks.

SETTING

Researchers recruited a convenience sample to participate in this university laboratory-based study.

PARTICIPANTS

English-speaking consumers of 2 or more daily medications (N=15) participated in the study. Individuals with cognitive impairment or who did not manage their own medications were excluded.

INTERVENTIONS

Participants were randomized to 1 of 3 pillbox interventions: (1) standard-of-care pillbox; (2) customized off-the-shelf pillbox; or (3) customized 3-dimensional (3D) printed pillbox.

MAIN OUTCOME MEASURES

Outcome measures were divided among the 3 goals of the study. In addition to feasibility metrics, the Adherence to Refills and Medications Scale was used to measure the primary outcome measure, medication adherence. The Quebec User Evaluation of Satisfaction with Assistive Technology was used to measure pillbox satisfaction.

RESULTS

Researchers successfully administered 6 standard-of-care, 5 custom off-the-shelf, and 4 custom 3D printed pillboxes. Compared with the standard-of-care pillboxes, customized 3D printed pillboxes had large (d=1.04) and customized off-the-shelf pillboxes had medium (d=0.67) effects on medication adherence.

CONCLUSIONS

Prescription of customized pillboxes using a manualized and novel assistive technology approach that leverages 3D printing is feasible.

Organs in Color: Utilizing Free Software and Emerging Multi Jet Fusion Technology to Color and Surface Label 3D-Printed Anatomical Models

3D printing (3DP) is a rapidly evolving innovative technology that has already been utilized for the development of educational anatomic models. Until recently, it was difficult and tedious to create multi-colored models and especially labels due to technological constraints. In this technical note, a comprehensive guide for creating labeled and color-coded anatomic models was created using free software, Blender. We have composed a step-by-step process for taking an existing 3D model and adding labeling and color that is compatible with modern high-quality 3D printing technologies (Multi Jet Fusion). We provided colored and labeled 3D renderings of the surface anatomy of the brain, ventricular system of the brain, the segments of the liver, and coronary arteries as examples of the diverse potential of this technology. Additionally, we 3D printed actual models of the surface anatomy of the brain and ventricles of the brain using HP Multi Jet Fusion to demonstrate the potential of this technology in the creation of anatomic models.

Expanding Quality by Design Principles to Support 3D Printed Medical Device Development Following the Renewed Regulatory Framework in Europe

The vast scope of 3D printing has ignited the production of tailored medical device (MD) development and catalyzed a paradigm shift in the health-care industry, particularly following the COVID pandemic. This review aims to provide an update on the current progress and emerging opportunities for additive manufacturing following the introduction of the new medical device regulation (MDR) within the EU. The advent of early-phase implementation of the Quality by Design (QbD) quality management framework in MD development is a focal point. The application of a regulatory supported QbD concept will ensure successful MD development, as well as pointing out the current challenges of 3D bioprinting. Utilizing a QbD scientific and risk-management approach ensures the acceleration of MD development in a more targeted way by building in all stakeholders' expectations, namely those of the patients, the biomedical industry, and regulatory bodies.

X-ray attenuation of bone, soft and adipose tissue in CT from 70 to 140 kV and comparison with 3D printable additive manufacturing materials

Additive manufacturing and 3D printing are widely used in medical imaging to produce phantoms for image quality optimization, imaging protocol definition, comparison of image quality between different imaging systems, dosimetry, and quality control. Anthropomorphic phantoms mimic tissues and contrasts in real patients with regard to X-ray attenuation, as well as dependence on X-ray spectra. If used with different X-ray energies, or to optimize the spectrum for a certain procedure, the energy dependence of the attenuation must replicate the corresponding energy dependence of the tissues mimicked, or at least be similar. In the latter case the materials’ Hounsfield values need to be known exactly to allow to correct contrast and contrast to noise ratios accordingly for different beam energies. Fresh bovine and porcine tissues including soft and adipose tissues, and hard tissues from soft spongious bone to cortical bone were scanned at different energies, and reference values of attenuation in Hounsfield units (HU) determined. Mathematical model equations describing CT number dependence on kV for bones of arbitrary density, and for adipose tissues are derived. These data can be used to select appropriate phantom constituents, compare CT values with arbitrary phantom materials, and calculate correction factors for phantoms consisting of materials with an energy dependence different to the tissues. Using data on a wide number of additive manufacturing and 3D printing materials, CT numbers and their energy dependence were compared to those of the tissues. Two commercially available printing filaments containing calcium carbonate powder imitate bone tissues with high accuracy at all kV values. Average adipose tissue can be duplicated by several off-the-shelf printing polymers. Since suitable printing materials typically exhibit a too high density for the desired attenuation of especially soft tissues, controlled density reduction by underfilling might improve tissue equivalence.

Guide for starting or optimizing a 3D printing clinical service

Three-dimensional (3D) printing has applications in many fields and has gained substantial traction in medicine as a modality to transform two-dimensional scans into three-dimensional renderings. Patient-specific 3D printed models have direct patient care uses in surgical and procedural specialties, allowing for increased precision and accuracy in developing treatment plans and guiding surgeries. Medical applications include surgical planning, surgical guides, patient and trainee education, and implant fabrication. 3D printing workflow for a laboratory or clinical service that produces anatomic models and guides includes optimizing imaging acquisition and post-processing, segmenting the imaging, and printing the model. Quality assurance considerations include supervising medical imaging expert radiologists' guidance and self-implementing in-house quality control programs. The purpose of this review is to provide a workflow and guide for starting or optimizing laboratories and clinical services that 3D-print anatomic models or guides for clinical use.

Knowledge on Applications of 3D Design and Printing in Dentistry Among Dental Practitioners in Saudi Arabia: A Questionnaire-Based Survey

Background: This knowledge, attitude, and practices (KAP) survey will provide baseline data and identify gaps that may facilitate understanding and further action to plan, implement, and evaluate practice toward 3D-printing technology among dental practitioners in Saudi Arabia.

AIMS AND OBJECTIVES

The present study aims to assess dental practitioners' self-reported knowledge, attitude, and practice of 3D printing in Saudi Arabia.

METHODOLOGY

A cross-sectional, closed-ended questionnaire of registered dental practitioners in Saudi Arabia was conducted. A sample size of 156 was considered for analysis. After obtaining approval from the Institutional Review Board, Riyadh Elm University, the research was conducted during the month of April 2022 amongst 154 registered dental practitioners. The research was distributed among dental health specialists either working in dental colleges, dental clinics, or both in government as well as private settings. Dentists who were not actively involved in 3D printing were excluded. SPSS software, version 25.0, (IBM Corp., Armonk, NY) was used to analyze the data.

RESULTS AND CONCLUSION

Of all dentists included in the study, 98% were found to be aware that 3D printing in dentistry is used in Saudi Arabia and 2 % were not aware of its usage in Saudi Arabia. In total, 78.60% of the dentists felt that 3D-printed implant guides made the placement of implants the most accurate and least complicated procedure, and 21.40% of the dentists felt it was the least accurate and most complicated procedure.

3D printing methods for radiological anthropomorphic phantoms

Three dimensional (3D) printing technology has been widely evaluated for the fabrication of various anthropomorphic phantoms during the last couple of decades. The demand for such high quality phantoms is constantly rising and gaining an ever-increasing interest. Although, in a short time 3D printing technology provided phantoms with more realistic features when compared to the previous conventional methods, there are still several aspects to be explored. One of these aspects is the further development of the current 3D printing methods and software devoted to radiological applications. The current 3D printing software and methods usually employ 3D models, while the direct association of medical images with the 3D printing process is needed in order to provide results of higher accuracy and closer to the actual tissues' texture. Another aspect of high importance is the development of suitable printing materials. Ideally, those materials should be able to emulate the entire range of soft and bone tissues, while still matching the human's anatomy. Five types of 3D printing methods have been mainly investigated so far: (a) solidification of photo-curing materials; (b) deposition of melted plastic materials; (c) printing paper-based phantoms with radiopaque ink; (d) melting or binding plastic powder; and (e) bio-printing. From the first and second category, polymer jetting technology and fused filament fabrication (FFF), also known as fused deposition modelling (FDM), are the most promising technologies for the fulfilment of the requirements of realistic and radiologically equivalent anthropomorphic phantoms. Another interesting approach is the fabrication of radiopaque paper-based phantoms using inkjet printers. Although, this may provide phantoms of high accuracy, the utilized materials during the fabrication process are restricted to inks doped with various contrast materials. A similar condition applies to the polymer jetting technology, which despite being quite fast and very accurate, the utilized materials are restricted to those capable of polymerization. The situation is better for FFF/FDM 3D printers, since various compositions of plastic filaments with external substances can be produced conveniently. Although, the speed and accuracy of this 3D printing method are lower compared to the others, the relatively low-cost, constantly improving resolution, sufficient printing volume and plethora of materials are quite promising for the creation of human size heterogeneous phantoms and their adaptation to the treatment procedures of patients in the current health systems.

Use of 3D printing and pre-contouring plate in the surgical planning of acetabular fractures: A systematic review

BACKGROUND

Acetabular fractures are caused by high energy injuries. The treatment aims to reconstruct the articular surface, restoring the anatomical structure. The surgical management of these fractures is difficult because it requires familiarity with the 3D anatomy of the pelvis. With the use of 3D printing technique for planning surgery, this limitation could be overcome.

HYPOTHESIS

Studies examining the use of 3D printing in pre-operative planning of acetabular fractures tend to agree on its usefulness.

METHODS

A systematic review of two electronic medical databases was performed by three independent authors, using the following inclusion criteria: any type of acetabular fracture and pre-operative use of 3D printing to plan the surgery.

RESULTS

Among 93 screened articles, following selection criteria, six randomised controlled human trials (hRCT) were eligible for the study; articles compare a group in which a pre-contouring plate was performed through 3D printing with a control group in which the plate was intraoperatively modelled.

CONCLUSION

This review demonstrates the advantage of 3D printing in terms of surgical time, reduction of blood losses, quality of fracture reduction, and fixation, and reporting best clinical outcomes.

LEVEL OF EVIDENCE

II.

Establishing 3D Printing at the Point of Care: Basic Principles and Tools for Success

As the medical applications of three-dimensional (3D) printing increase, so does the number of health care organizations in which adoption or expansion of 3D printing facilities is under consideration. With recent advancements in 3D printing technology, medical practitioners have embraced this powerful tool to help them to deliver high-quality patient care, with a focus on sustainability. The use of 3D printing in the hospital or clinic at the point of care (POC) has profound potential, but its adoption is not without unanticipated challenges and considerations. The authors provide the basic principles and considerations for building the infrastructure to support 3D printing inside the hospital. This process includes building a business case; determining the requirements for facilities, space, and staff; designing a digital workflow; and considering how electronic health records may have a role in the future. The authors also discuss the supported applications and benefits of medical 3D printing and briefly highlight quality and regulatory considerations. The information presented is meant to be a practical guide to assist radiology departments in exploring the possibilities of POC 3D printing and expanding it from a niche application to a fixture of clinical care. An invited commentary by Ballard is available online. ^©RSNA, 2022.

High-Resolution CT Imaging of the Temporal Bone: A Cadaveric Specimen Study

Objective  Super-high and ultra-high spatial resolution computed tomography (CT) imaging can be advantageous for detecting temporal bone pathology and guiding treatment strategies. Methods  Six temporal bone cadaveric specimens were used to evaluate the temporal bone microanatomic structures utilizing the following CT reconstruction modes: normal resolution (NR, 0.5-mm slice thickness, 512 ² matrix), high resolution (HR, 0.5-mm slice thickness, 1,024 ² matrix), super-high resolution (SHR, 0.25-mm slice thickness, 1,024 ² matrix), and ultra-high resolution (UHR, 0.25-mm slice thickness, 2,048 ² matrix). Noise and signal-to-noise ratio (SNR) for bone and air were measured at each reconstruction mode. Two observers assessed visualization of seven small anatomic structures using a 4-point scale at each reconstruction mode. Results  Noise was significantly higher and SNR significantly lower with increases in spatial resolution (NR, HR, and SHR). There was no statistical difference between SHR and UHR imaging with regard to noise and SNR. There was significantly improved visibility of all temporal bone osseous structures of interest with SHR and UHR imaging relative to NR imaging ( p  < 0.001) and most of the temporal bone osseous structures relative to HR imaging. There was no statistical difference in the subjective image quality between SHR and UHR imaging of the temporal bone ( p  ≥ 0.085). Conclusion  Super-high-resolution and ultra-high-resolution CT imaging results in significant improvement in image quality compared with normal-resolution and high-resolution CT imaging of the temporal bone. This preliminary study also demonstrates equivalency between super-high and ultra-high spatial resolution temporal bone CT imaging protocols for clinical use.

Clinical acceptance of advanced visualization methods: a comparison study of 3D-print, virtual reality glasses, and 3D-display

BACKGROUND

To compare different methods of three-dimensional representations, namely 3D-Print, Virtual Reality (VR)-Glasses and 3D-Display regarding the understanding of the pathology, accuracy of details, quality of the anatomical representation and technical operability and assessment of possible change in treatment in different disciplines and levels of professional experience.

METHODS

Interviews were conducted with twenty physicians from the disciplines of cardiology, oral and maxillofacial surgery, orthopedic surgery, and radiology between 2018 and 2020 at the University Hospital of Basel. They were all presented with three different three-dimensional clinical cases derived from CT data from their area of expertise, one case for each method. During this, the physicians were asked for their feedback written down on a pencil and paper questionnaire.

RESULTS

Concerning the understanding of the pathology and quality of the anatomical representation, VR-Glasses were rated best in three out of four disciplines and two out of three levels of professional experience. Regarding the accuracy of details, 3D-Display was rated best in three out of four disciplines and all levels of professional experience. As to operability, 3D-Display was consistently rated best in all levels of professional experience and all disciplines. Possible change in treatment was reported using 3D-Print in 33%, VR-Glasses in 44%, and 3D-Display in 33% of participants. Physicians with a professional experience of more than ten years reported no change in treatment using any method.

CONCLUSIONS

3D-Print, VR-Glasses, and 3D-Displays are very well accepted, and a relevant percentage of participants with less than ten years of professional work experience could imagine a possible change in treatment using any of these three-dimensional methods. Our findings challenge scientists, technicians, and physicians to further develop these methods to improve the three-dimensional understanding of pathologies and to add value to the education of young and inexperienced physicians.

3D Printing of Abdominal Immobilization Masks for Therapeutics: Dosimetric, Mechanical and Financial Analysis

Molding immobilization masks is a time-consuming process, strongly dependent on the healthcare professional, and potentially uncomfortable for the patient. Thus, an alternative sustainable automated production process is proposed for abdominal masks, using fused deposition modelling (FDM) 3D printing with polylactic acid (PLA). Radiological properties of PLA were evaluated by submitting a set of PLA plates to photon beam radiation, while estimations of their mechanical characteristics were assessed through numerical simulation. Based on the obtained results, the abdominal mask was 3D printed and process costs and times were analyzed. The plates revealed dose transmissions similar to the conventional mask at all energies, and mechanical deformation guarantees the required immobilization, with a 66% final cost reduction. PLA proved to be an excellent material for this purpose. Despite the increase in labour costs, a significant reduction in material costs is observed with the proposed process. However, the time results are not favorable, mainly due to the printing technique used in this study.

Vascular 3D Printing with a Novel Biological Tissue Mimicking Resin for Patient-Specific Procedure Simulations in Interventional Radiology: a Feasibility Study

Three-dimensional (3D) printing of vascular structures is of special interest for procedure simulations in Interventional Radiology, but remains due to the complexity of the vascular system and the lack of biological tissue mimicking 3D printing materials a technical challenge. In this study, the technical feasibility, accuracy, and usability of a recently introduced silicone-like resin were evaluated for endovascular procedure simulations and technically compared to a commonly used standard clear resin. Fifty-four vascular models based on twenty-seven consecutive embolization cases were fabricated from preinterventional CT scans and each model was checked for printing success and accuracy by CT-scanning and digital comparison to its original CT data. Median deltas (Δ) of luminal diameters were 0.35 mm for clear and 0.32 mm for flexible resin (216 measurements in total) with no significant differences (p > 0.05). Printing success was 85.2% for standard clear and 81.5% for the novel flexible resin. In conclusion, vascular 3D printing with silicone-like flexible resin was technically feasible and highly accurate. This is the first and largest consecutive case series of 3D-printed embolizations with a novel biological tissue mimicking material and is a promising next step in patient-specific procedure simulations in Interventional Radiology.

New Insights into the Application of 3D-Printing Technology in Hernia Repair

Abdominal hernia repair using prosthetic materials is among the surgical interventions most widely performed worldwide. These materials, or meshes, are implanted to close the hernial defect, reinforcing the abdominal muscles and reestablishing mechanical functionality of the wall. Meshes for hernia repair are made of synthetic or biological materials exhibiting multiple shapes and configurations. Despite the myriad of devices currently marketed, the search for the ideal mesh continues as, thus far, no device offers optimal tissue repair and restored mechanical performance while minimizing postoperative complications. Additive manufacturing, or 3D-printing, has great potential for biomedical applications. Over the years, different biomaterials with advanced features have been successfully manufactured via 3D-printing for the repair of hard and soft tissues. This technological improvement is of high clinical relevance and paves the way to produce next-generation devices tailored to suit each individual patient. This review focuses on the state of the art and applications of 3D-printing technology for the manufacture of synthetic meshes. We highlight the latest approaches aimed at developing improved bioactive materials (e.g., optimizing antibacterial performance, drug release, or device opacity for contrast imaging). Challenges, limitations, and future perspectives are discussed, offering a comprehensive scenario for the applicability of 3D-printing in hernia repair.

Three-dimensional printed personalized drug devices with anatomical fit: a review

OBJECTIVES

Three-dimensional printing (3DP) has opened the era of drug personalization, promising to revolutionize the pharmaceutical field with improvements in efficacy, safety and compliance of the treatments. As a result of these investigations, a vast therapeutic field has opened for 3DP-loaded drug devices with an anatomical fit. Along these lines, innovative dosage forms, unimaginable until recently, can be obtained. This review explores 3DP-engineered drug devices described in recent research articles, as well as in patented inventions, and even devices already produced by 3DP with drug-loading potential.

KEY FINDINGS

3D drug-loaded stents, implants and prostheses are reviewed, along with devices produced to fit hard-to-attach body parts such as nasal masks, vaginal rings or mouthguards. The most promising 3DP techniques for such devices and the complementary technologies surrounding these inventions are also discussed, particularly the scanners useful for mapping body parts. Health regulatory concerns regarding the new use of such technology are also analysed.

SUMMARY

The scenario discussed in this review shows that for wearable 3DP drug devices to become a tangible reality to users, it will be necessary to overcome the existing regulatory barriers, create new interfaces with electronic systems and improve the mapping mechanisms of body surfaces.

Comparison of the Mechanical Properties of Temporary Abutments Made of Polyetheretherketone and Photopolymeric Resin

Background:

Provisional abutments are widely used in the rehabilitation of dental implants as it allows the use of a provisional crown in order to restore patient aesthetics while the final restoration is being carried out; most of the temporary abutments available on the market are made of titanium alloygrade V (type Ti-6Al-4Va) and polyetheretherketone (PEEK), a material that exhibits very low adhesion to polymethylmethacrylate (PMMA).

Objective:

This research is aimed to compare the mechanical properties of commercially available PEEK abutments and abutments made using an additive technique with photopolymeric resin.

Methods:

Eighteen commercial temporary abutments manufactured in PEEK and eighteen experimental abutments manufactured by 3D printing using photopolymeric resin were used. The two groups of abutments were subjected to compression, bending and adhesion tests using six abutments of each type by test. Statistical analysis was performed with STATA 14 software. The data were analyzed by means of the Wilcoxon Mann-Whitney test, as these were two independent samples of reduced size. Values ​​lower than (p <0.05) were considered statistically significant in all tests and rejected the null hypothesis of equality between the group medians.

Conclusion:

The results indicate that it is possible to make abutments with good mechanical properties in photopolymeric resin (CLEAR FLGP04) using additive techniques to be used as temporary abutments.

Three-dimensional mapping of distal humerus fracture

Background

Distal humerus fractures (DHFs) constitute one-third of elbow fractures approximately. In this study, we aim to define and analyze the fracture lines and morphological features of DHFs using mapping technique.

Methods

One hundred and two DHFs were retrospectively reviewed. All the computed tomography (CT) data were used to manually reconstruct and virtually reduce the DHF fragments to fit a standard 3D model. Smooth curves were depicted accurately onto the surface of the template to represent the fracture lines. All the curves were overlapped onto the model to create the 3D fracture map and heat map.

Results

Our analysis was based on 102 CT images of DHFs, contributed by 59 male and 43 female patients (mean age, 46 years; range, 18-93 years), and included 15 type A, 25 type B, and 62 type C fractures. On mapping, the hot zones were located in the radial fossa, coronoid fossa, olecranon fossa, and the external part of the trochlear. Conversely, the cold zones were noted in medial condyle, the medial side of the trochlear, and the anterolateral area on the supracondylar ridge.

Conclusions

Our study firstly shows the fracture lines and morphological features of distal humeral fractures by three-dimensional mapping technology. Distal humerus fracture lines are characteristic and highly related to the micro-architecture difference of distal humerus, which may provide some guidance for the treatment plan selection and surgical fixation design.

Facilitating Student Understanding through Incorporating Digital Images and 3D-Printed Models in a Human Anatomy Course

Combining classical educational methods with interactive three-dimensional (3D) visualization technology has great power to support and provide students with a unique opportunity to use them in the study process, training, and/or simulation of different medical procedures in terms of a Human Anatomy course. In 2016, Rīga Stradiņš University (RSU) offered students the 3D Virtual Dissection Table “Anatomage” with possibilities of virtual dissection and digital images at the Department of Morphology. The first 3D models were printed in 2018 and a new printing course was integrated into the Human Anatomy curriculum. This study was focused on the interaction of students with digital images, 3D models, and their combinations. The incorporation and use of digital technologies offered students great tools for their creativity, increased the level of knowledge and skills, and gave them a possibility to study human body structures and to develop relationships between basic and clinical studies.

Impact of Simulation Training on Radiology Resident Performance in Neonatal Head Ultrasound

RATIONALE AND OBJECTIVES

The aim of this study was to determine whether resident performance in head ultrasound on neonates improves following brain phantom simulation training.

MATERIALS AND METHODS

Ten junior radiology residents with at least one year of radiology training were divided into two equal groups. Both groups received a detailed head ultrasound protocol sheet and observed a technologist perform a head ultrasound on a neonatal patient at the beginning of their first pediatric radiology rotation. Both groups of residents also received teaching with a brain phantom model. Group A residents independently performed one head ultrasound exam, subsequently received phantom simulation training, and then performed a post-training head ultrasound exam. Group B residents received phantom simulation training prior to their first head ultrasound exam. Three pediatric radiologists independently and blindly reviewed the ultrasound images of each head ultrasound exam for proficiency of image acquisition using a validated scoring system. Scores of Group A residents prior to phantom training were compared to their scores after phantom training as well as to scores of Group B residents using simple linear regression.

RESULTS

There was a statistically significant improvement in the performance of head ultrasound on neonates when comparing the same residents pre- and postphantom training (p = 0.003). Residents who initially trained with the phantom performed significantly better on their first head ultrasound examination on a neonate than those residents who did not (p = 0.005).

CONCLUSION

Our novel head ultrasound phantom training model significantly improves radiology resident performance of head ultrasound on neonates and may, therefore, be beneficial for residency education.

3D Printing Applications for Radiology: An Overview

Three-dimensional (3D) printing technologies are part of additive manufacturing processes and are used to manufacture a 3D physical model from a digital computer-aided design model as per the required shape and size. These technologies are now used for advanced radiology applications by providing all information through 3D physical model. It provides innovation in radiology for clinical applications, treatment planning, procedural simulation, medical and patient education. Radiological advancements have been made in diagnosis and communication through medical digital imaging techniques like computed tomography, magnetic resonance imaging. These images are converted into Digital Imaging and Communications in Medicine in Standard Triangulate Language file format, easily printable in 3D printing technologies. This 3D model provides in-depth information about pathologic and anatomic states. It is useful to create new opportunities related to patient care. This article discusses the potential of 3D printing technology in radiology. The steps involved in 3D printing for radiology are discussed diagrammatically, and finally identified 12 significant applications of 3D printing technology for radiology with a brief description. A radiologist can incorporate this technology to fulfil different challenges such as training, planning, guidelines, and better communications.

A review of visualization techniques of post-mortem computed tomography data for forensic death investigations

Postmortem computed tomography (PMCT) is a standard image modality used in forensic death investigations. Case- and audience-specific visualizations are vital for identifying relevant findings and communicating them appropriately. Different data types and visualization methods exist in 2D and 3D, and all of these types have specific applications. 2D visualizations are more suited for the radiological assessment of PMCT data because they allow the depiction of subtle details. 3D visualizations are better suited for creating visualizations for medical laypersons, such as state attorneys, because they maintain the anatomical context. Visualizations can be refined by using additional techniques, such as annotation or layering. Specialized methods such as 3D printing and virtual and augmented reality often require data conversion. The resulting data can also be used to combine PMCT data with other 3D data such as crime scene laser scans to create crime scene reconstructions. Knowledge of these techniques is essential for the successful handling of PMCT data in a forensic setting. In this review, we present an overview of current visualization techniques for PMCT.

Systematic review of three-dimensional printing for simulation training of interventional radiology trainees

RATIONALE AND OBJECTIVES

Three-dimensional (3D) printing has been utilized as a means of producing high-quality simulation models for trainees in procedure-intensive or surgical subspecialties. However, less is known about its role for trainee education within interventional radiology (IR). Thus, the purpose of this review was to assess the state of current literature regarding the use of 3D printed simulation models in IR procedural simulation experiences.

MATERIALS AND METHODS

A literature query was conducted through April 2020 for articles discussing three-dimensional printing for simulations in PubMed, Embase, CINAHL, Web of Science, and the Cochrane library databases using key terms relating to 3D printing, radiology, simulation, training, and interventional radiology.

RESULTS

We identified a scarcity of published sources, 4 total articles, that appraised the use of three-dimensional printing for simulation training in IR. While trainee feedback is generally supportive of the use of three-dimensional printing within the field, current applications utilizing 3D printed models are heterogeneous, reflecting a lack of best practices standards in the realm of medical education.

CONCLUSIONS

Presently available literature endorses the use of three-dimensional printing within interventional radiology as a teaching tool. Literature documenting the benefits of 3D printed models for IR simulation has the potential to expand within the field, as it offers a straightforward, sustainable, and reproducible means for hands-on training that ought to be standardized.

Employing hydrogels in tissue engineering approaches to boost conventional cancer-based research and therapies

Cancer is a complicated disease that involves the efforts of researchers to introduce and investigate novel successful treatments. Traditional cancer therapy approaches, especially chemotherapy, are prone to possible systemic side effects, such as the dysfunction of liver or kidney, neurological side effects and a decrease of bone marrow activity. Hydrogels, along with tissue engineering techniques, provide tremendous potential for scientists to overcome these issues through the release of drugs at the site of tumor. Hydrogels demonstrated competency as potent and stimulus-sensitive drug delivery systems for tumor removal, which is attributed to their unique features, including high water content, biocompatibility, and biodegradability. In addition, hydrogels have gained more attention as 3D models for easier and faster screening of cancer and tumors due to their potential in mimicking the extracellular matrix. Hydrogels as a reservoir can be loaded by an effective dosage of chemotherapeutic agents, and then deliver them to targets. In comparison to conventional procedures, hydrogels considerably decreased the total cost, duration of research, and treatment time. This study provides a general look into the potential role of hydrogels as a powerful tool to augment cancer studies for better analysis of cancerous cell functions, cell survival, angiogenesis, metastasis, and drug screening. Moreover, the upstanding application of drug delivery systems related to the hydrogel in order to sustain the release of desired drugs in the tumor cell-site were explored.

3D and 4D printing in dentistry and maxillofacial surgery: Printing techniques, materials, and applications

3D and 4D printing are cutting-edge technologies for precise and expedited manufacturing of objects ranging from plastic to metal. Recent advances in 3D and 4D printing technologies in dentistry and maxillofacial surgery enable dentists to custom design and print surgical drill guides, temporary and permanent crowns and bridges, orthodontic appliances and orthotics, implants, mouthguards for drug delivery. In the present review, different 3D printing technologies available for use in dentistry are highlighted together with a critique on the materials available for printing. Recent reports of the application of these printed platformed are highlighted to enable readers appreciate the progress in 3D/4D printing in dentistry.

Applications of 3D printing in breast cancer management

Three-dimensional (3D) printing is a method by which two-dimensional (2D) virtual data is converted to 3D objects by depositing various raw materials into successive layers. Even though the technology was invented almost 40 years ago, a rapid expansion in medical applications of 3D printing has only been observed in the last few years. 3D printing has been applied in almost every subspecialty of medicine for pre-surgical planning, production of patient-specific surgical devices, simulation, and training. While there are multiple review articles describing utilization of 3D printing in various disciplines, there is paucity of literature addressing applications of 3D printing in breast cancer management. Herein, we review the current applications of 3D printing in breast cancer management and discuss the potential impact on future practices.

3D Printing as a Promising Tool in Personalized Medicine

Personalized medicine has the potential to revolutionize the healthcare sector, its goal being to tailor medication to a particular individual by taking into consideration the physiology, drug response, and genetic profile of that individual. There are many technologies emerging to cause this paradigm shift from the conventional "one size fits all" to personalized medicine, the major one being three-dimensional (3D) printing. 3D printing involves the establishment of a three-dimensional object, in a layer upon layer manner using various computer software. 3D printing can be used to construct a wide variety of pharmaceutical dosage forms varying in shape, release profile, and drug combination. The major technological platforms of 3D printing researched on in the pharmaceutical sector include inkjet printing, binder jetting, fused filament fabrication, selective laser sintering, stereolithography, and pressure-assisted microsyringe. A possible future application of this technology could be in a clinical setting, where prescriptions could be dispensed based on individual needs. This manuscript points out the various 3D printing technologies and their applications in research for fabricating pharmaceutical products, along with their pros and cons. It also presents its potential in personalized medicine by individualizing the dose, release profiles, and incorporating multiple drugs in a polypill. An insight on how it tends to various populations is also provided. An approach of how it can be used in a clinical setting is also highlighted. Also, various challenges faced are pointed out, which must be overcome for the success of this technology in personalized medicine.