Conjugated-Polymer-Amplified Sensing, Imaging, and Therapy

Porphyrin-Based Organic Nanoparticles with NIR-IIa Fluorescence for Orthotopic Glioblastoma Theranostics

The development of efficient theranostic nanoagents for the precise diagnosis and targeted therapy of glioblastoma (GBM) remains a big challenge. Herein, we designed and developed porphyrin-based organic nanoparticles (PNP NPs) with strong emission in the near-infrared IIa window (NIR-IIa) for orthotopic GBM theranostics. PNP NPs possess favorable photoacoustic and photothermal properties, high photostability, and low toxicity. After modification with the RGD peptide, the obtained PNPD NPs exhibited enhanced blood-brain barrier (BBB) penetration capability and GBM targeting ability. NIR-IIa imaging was employed to monitor the in vivo biodistribution and accumulation of the nanoparticles, revealing a significant enhancement in penetration depth and signal-to-noise ratio. Both in vitro and in vivo results demonstrated that PNPD NPs effectively inhibited the proliferation of tumor cells and induced negligible side effects in normal brain tissues. In general, the work presented a kind of brain-targeted porphyrin-based NPs with NIR-IIa fluorescence for orthotopic glioblastoma theranostics, showing promising prospects for clinical translation.

Direct Zeptomole Detection of RNA Biomarkers by Ultrabright Fluorescent Nanoparticles on Magnetic Beads

Nucleic acids are important biomarkers in cancer and viral diseases. However, their ultralow concentration in biological/clinical samples makes direct target detection challenging, because it leads to slow hybridization kinetics with the probe and its insufficient signal-to-noise ratio. Therefore, RNA target detection is done by molecular (target) amplification, notably by RT-PCR, which is a tedious multistep method that includes nucleic acid extraction and reverse transcription. Here, a direct method based on ultrabright dye-loaded polymeric nanoparticles in a sandwich-like hybridization assay with magnetic beads is reported. The ultrabright DNA-functionalized nanoparticle, equivalent to ≈10 000 strongly emissive rhodamine dyes, is hybridized with the magnetic bead to the RNA target, providing the signal amplification for the detection. This concept (magneto-fluorescent sandwich) enables high-throughput detection of DNA and RNA sequences of varied lengths from 48 to 1362 nt with the limit of detection down to 0.3 fm using a plate reader (15 zeptomoles), among the best reported for optical sandwich assays. Moreover, it allows semi-quantitative detection of SARS-CoV-2 viral RNA directly in clinical samples without a dedicated RNA extraction step. The developed technology, combining ultrabright nanoparticles with magnetic beads, addresses fundamental challenges in RNA detection; it is expected to accelerate molecular diagnostics of diseases.

Graphitic Carbon Nitride Quantum Dots (g-C3N4 QDs): From Chemistry to Applications

Since their emergence in 2014, graphitic carbon nitride quantum dots (g-C3N4 QDs) have attracted much interest from the scientific community due to their distinctive physicochemical features, including structural, morphological, electrochemical, and optoelectronic properties. Owing to their desirable characteristics, such as non-zero band gap, ability to be chemically functionalized or doped, possessing tunable properties, outstanding dispersibility in different media, and biocompatibility, g-C3N4 QDs have shown promise for photocatalysis, energy devices, sensing, bioimaging, solar cells, optoelectronics, among other applications. As these fields are rapidly evolving, it is very strenuous to pinpoint the emerging challenges of the g-C3N4 QDs development and application during the last decade, mainly due to the lack of critical reviews of the innovations in the g-C3N4 QDs synthesis pathways and domains of application. Herein, an extensive survey is conducted on the g-C3N4 QDs synthesis, characterization, and applications. Scenarios for the future development of g-C3N4 QDs and their potential applications are highlighted and discussed in detail. The provided critical section suggests a myriad of opportunities for g-C3N4 QDs, especially for their synthesis and functionalization, where a combination of eco-friendly/single step synthesis and chemical modification may be used to prepare g-C3N4 QDs with, for example, enhanced photoluminescence and production yields.

Rational Design of NIR-II Emitting Conjugated Polymer Derived Nanoparticles for Image-Guided Cancer Interventions

Due to the reduced absorption, light scattering, and tissue autofluorescence in the NIR-II (1000-1700 nm) region, significant efforts are underway to explore diverse material platforms for in vivo fluorescence imaging, particularly for cancer diagnostics and image-guided interventions. Of the reported imaging agents, nanoparticles derived from conjugated polymers (CPNs) offer unique advantages to alternative materials including biocompatibility, remarkable absorption cross-sections, exceptional photostability, and tunable emission behavior independent of cell labeling functionalities. Herein, the current state of NIR-II emitting CPNs are summarized and structure-function-property relationships are highlighted that can be used to elevate the performance of next-generation CPNs. Methods for particle processing and incorporating cancer targeting modalities are discussed, as well as detailed characterization methods to improve interlaboratory comparisons of novel materials. Contemporary methods to specifically apply CPNs for cancer diagnostics and therapies are then highlighted. This review not only summarizes the current state of the field, but offers future directions and provides clarity to the advantages of CPNs over other classes of imaging agents.

A Perspective Looking Backward and Forward on the 25th Anniversary of Conjugated Polyelectrolytes

Conjugated polyelectrolytes are π-conjugated polymers that contain ionic charged groups such as sulfonate (R-SO3-), carboxylate (R-COO-), or ammonium (R-NR3+) combined with a π-conjugated backbone. This perspective provides a summary review of the key developments in the field, starting from the first reports of their synthesis and properties to application-focused developments. The applications include optical sensors for molecular and biomolecular targets, organic electronic applications, and specific biological applications including cellular imaging and photodynamic therapy. This perspective concludes with a discussion of where the field of conjugated polyelectrolytes is expected to lead in the coming years.

Type I photodynamic antimicrobial therapy: Principles, progress, and future perspectives

The emergence of drug-resistant bacteria has significantly diminished the efficacy of existing antibiotics in the treatment of bacterial infections. Consequently, the need for finding a strategy capable of effectively combating bacterial infections has become increasingly urgent. Photodynamic therapy (PDT) is considered one of the most promising emerging antibacterial strategies due to its non-invasiveness, low adverse effect, and the fact that it does not lead to the development of drug resistance. However, bacteria at the infection sites often exist in the form of biofilm instead of the planktonic form, resulting in a hypoxic microenvironment. This phenomenon compromises the treatment outcome of oxygen-dependent type-II PDT. Compared to type-II PDT, type-I PDT is not constrained by the oxygen concentration in the infected tissues. Therefore, in the treatment of bacterial infections, type-I PDT exhibits significant advantages over type-II PDT. In this review, we first introduce the fundamental principles of type-I PDT in details, including its physicochemical properties and how it generates reactive oxygen species (ROS). Next, we explore several specific antimicrobial mechanisms utilized by type-I PDT and summarize the recent applications of type-I PDT in antimicrobial treatment. Finally, the limitations and future development directions of type-I photosensitizers are discussed. STATEMENT OF SIGNIFICANCE: The misuse and overuse of antibiotics have accelerated the development of bacterial resistance. To achieve the effective eradication of resistant bacteria, pathfinders have devised various treatment strategies. Among these strategies, type I photodynamic therapy has garnered considerable attention owing to its non-oxygen dependence. The utilization of non-oxygen-dependent photodynamic therapy not only enables the effective elimination of drug-resistant bacteria but also facilitates the successful eradication of hypoxic biofilms, which exhibits promising prospects for treating biofilm-associated infections. Based on the current research status, we anticipate that the novel type I photodynamic therapy agent can surmount the biofilm barrier, enabling efficient treatment of hypoxic biofilm infections.

CO2-Responsive Water-Soluble Conjugated Polymers as a Multifunctional Fluorescent Probe for Bioimaging Applications

We describe important progress in the synthesis and development of gas-responsive water-soluble conjugated polymers (WSCPs) with potential as multifunctional fluorescent materials for biomedical imaging and probes. A water-soluble WSCP (I-PT) composed of a hydrophobic fluorescent polythiophene backbone and a hydrophilic imidazole side chain was successfully prepared through a facile and efficient two-step synthetic route. Owing to the repulsive force between the hydrophilic and hydrophobic segments and the highly sensitive carbon dioxide (CO2)- and nitrogen (N2)-responsive imidazole groups in its structure, I-PT can spontaneously self-assemble into spherical-like nanoparticles in an aqueous environment, and thus exhibits unique light absorption and fluorescence properties as well as rapid responsiveness to CO2 and N2. In addition, its structure, optical absorption/fluorescence behavior, and surface potential can be quickly turned on and off through alternating cycles of CO2 and N2 bubbling and exhibit controllable cyclic switching stability, thereby allowing effective manipulation of its hierarchical structure and chemical-physical characteristics. More importantly, a series of in vitro cell experiments confirmed that, compared to the significant cytotoxicity of pristine and N2-treated I-PT nanoparticles, CO2-treated I-PT nanoparticles exhibit extremely low cytotoxicity in normal and cancer cells and undergo greatly accelerated cellular uptake, resulting in a significant increase in the intensity and stability of their fluorescence signal in the intracellular environment. Overall, this newly discovered CO2/N2-responsive system provides new insights to effectively enhance the biocompatibility, cellular internalization, and intracellular fluorescence characteristics of WSCPs and holds great potential for biomedical imaging/sensing applications.

Fluorescent polymer as a biosensing tool for the diagnosis of microbial pathogens

Diseases and diagnoses are predominant in the human population. Early diagnosis of etiological agents plays a vital role in the treatment of bacterial infections. Existing standard diagnostic platforms are laborious, time-consuming, and require trained personnel and cost-effective procedure, though they are producing promising results. These shortcomings have led to a thirst for rapid diagnostic procedures. Fluorescence-based diagnosis is one of the efficient rapid diagnostic methods that rely on specific and sensitive bacterial detection. Emerging bio-sensing studies on conducting polymers (CPs) are gaining popularity in medical diagnostics due to their promising properties of high fluorescence efficiency, good light stability, and low cytotoxicity. Poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), is the first identified soluble polymer and model material for understanding the fundamental photophysics of conventional CPs. In this present study, MEH-PPV is used as a fluorescent dye for direct pathogen detection applications by interacting with the microbial cell surface. An optimized concentration of MEH-PPV solution used to confirm the presence of selective bacterial structures. The present study endeavours towards bacterial detection based on the emission from bacteria due to interfacial interaction between polymer and bacterial surface.

Conjugated Polymer Composite Nanoparticles Augmenting Photosynthesis-Based Light-Triggered Hydrogel Promotes Chronic Wound Healing

Diabetic chronic wounds are characterized by local hypoxia, impaired angiogenesis, and bacterial infection. In situ, self-supply of dissolved oxygen combined with the elimination of bacteria is urgent and challenging for chronic nonhealing wound treatment. Herein, an oxygen-generating system named HA-L-NB/PFE@cp involving biological photosynthetic chloroplasts (cp)/conjugated polymer composite nanoparticles (PFE-1-NPs@cp) and light-triggered hyaluronic acid-based (HA-L-NB) hydrogel for promoting diabetic wound healing is introduced. Briefly, conjugated polymer nanoparticles (PFE-1-NPs) possess unique light harvesting ability, which accelerates the electron transport rates in photosystem II (PS II) by energy transfer, elevating photosynthesis beyond natural chloroplasts. The enhanced release of oxygen can greatly relieve hypoxia, promote cell migration, and favor antibacterial photodynamic therapy. Additionally, the injectable hydrogel precursors are employed as a carrier to deliver PFE-1-NPs@cp into the wound. Under light irradiation, they quickly form a gel by S-nitrosylation coupling reaction and in situ anchor on tissues through amine-aldehyde condensation. Both in vitro and in vivo assays demonstrate that the oxygen-generating system can simultaneously relieve wound hypoxia, eliminate bacteria, and promote cell migration, leading to the acceleration of wound healing. This study provides a facile approach to develop an enhanced oxygen self-sufficient system for promoting hypoxic tissue, especially diabetic wound healing.

Composite Nanomaterials of Conjugated Polymers and Upconversion Nanoparticles for NIR-Triggered Photodynamic/Photothermal Synergistic Cancer Therapy

Phototherapies such as photodynamic therapy (PDT) and photothermal therapy (PTT) have attracted great attention in the field of cancer treatment. However, the individual PDT or PTT makes it difficult to achieve optimal antitumor effects compared to the PDT/PTT combined therapy. Also, the effect of PDT is usually limited by the penetration depth of the UV-vis light source. Herein, we designed and synthesized novel composite nanoparticles UCNPs-CPs, which are constructed from two conjugated polymers and upconversion nanoparticles β-NaYF4:Yb,Tm (UCNPs) via a coordination reaction. By virtue of the excellent spectral overlap between absorption of conjugated polymers and emission of UCNPs, the UCNPs can absorb NIR light and effectively excite conjugated polymers by energy transfer to produce massive reactive oxygen species under 980 nm excitation and heat energy under 808 nm laser irradiation, achieving photodynamic/photothermal synergistic therapy. The in vitro cellular investigation proves that the dual modal phototherapy exhibits enhanced antitumor ability compared to single PDT or PTT. Furthermore, UCNPs-CPs inhibit tumor growth 100% in a 4T1 breast tumor mice model with both NIR laser irradiation, indicating that UCNPs-CPs is an excellent platform for synergistic PDT/PTT treatment. Thus, this study provides a promising strategy for NIR-triggered dual modal phototherapy.

Sequence-Defined Conjugated Oligomers in Donor-Acceptor Dyads

Conjugated macromolecules have a rich history in chemistry, owing to their chemical arrangements that intertwine physical and electronic properties. The continuing study and application of these systems, however, necessitates the development of atomically precise models that bridge the gap between molecules, polymers, and/or their blends. One class of conjugated polymers that have facilitated the advancement of structure-property relationships is discrete, precision oligomers that have remained an outstanding synthetic challenge with only a handful of reported examples. Here we show the first synthesis of molecular dyads featuring sequence-defined oligothiophene donors covalently linked a to small-molecule acceptor. These dyads serve as a platform for probing complex photophysical interactions involving sequence-defined oligomers. This assessment is facilitated through the unprecedented control of oligothiophene length- and sequence-dependent arrangement relative to the acceptor unit, made possible by the incorporation of hydroxyl-containing side chains at precise positions along the backbone through sequence-defined oligomerizations. We show that both the oligothiophene sequence and length play complementary roles in determining the transfer efficiency of photoexcited states. Overall, the work highlights the importance of the spatial arrangement of donor-acceptor systems that are commonly studied for a range of uses, including light harvesting and photocatalysis.

Micro- and nanosystems for the detection of hemorrhagic fever viruses

Hemorrhagic fever viruses (HFVs) are virulent pathogens that can cause severe and often fatal illnesses in humans. Timely and accurate detection of HFVs is critical for effective disease management and prevention. In recent years, micro- and nano-technologies have emerged as promising approaches for the detection of HFVs. This paper provides an overview of the current state-of-the-art systems for micro- and nano-scale approaches to detect HFVs. It covers various aspects of these technologies, including the principles behind their sensing assays, as well as the different types of diagnostic strategies that have been developed. This paper also explores future possibilities of employing micro- and nano-systems for the development of HFV diagnostic tools that meet the practical demands of clinical settings.

Recent Advances in Conjugated Polymer-Based Biosensors for Virus Detection

Nowadays, virus pandemics have become a major burden seriously affecting human health and social and economic development. Thus, the design and fabrication of effective and low-cost techniques for early and accurate virus detection have been given priority for prevention and control of such pandemics. Biosensors and bioelectronic devices have been demonstrated as promising technology to resolve the major drawbacks and problems of the current detection methods. Discovering and applying advanced materials have offered opportunities to develop and commercialize biosensor devices for effectively controlling pandemics. Along with various well-known materials such as gold and silver nanoparticles, carbon-based materials, metal oxide-based materials, and graphene, conjugated polymer (CPs) have become one of the most promising candidates for preparation and construction of excellent biosensors with high sensitivity and specificity to different virus analytes owing to their unique π orbital structure and chain conformation alterations, solution processability, and flexibility. Therefore, CP-based biosensors have been regarded as innovative technologies attracting great interest from the community for early diagnosis of COVID-19 as well as other virus pandemics. For providing precious scientific evidence of CP-based biosensor technologies in virus detection, this review aims to give a critical overview of the recent research related to use of CPs in fabrication of virus biosensors. We emphasize structures and interesting characteristics of different CPs and discuss the state-of-the-art applications of CP-based biosensors as well. In addition, different types of biosensors such as optical biosensors, organic thin film transistors (OTFT), and conjugated polymer hydrogels (CPHs) based on CPs are also summarized and presented.

Water-soluble graphene quantum dot-based polymer nanoparticles with internal donor/acceptor heterojunctions for efficient and selective detection of cancer cells

We present a new, insightful donor-acceptor (D-A) energy transfer-based strategy for the preparation and development of water-soluble multifunctional pH-responsive heterojunction nanoparticles. Hydrophilic tertiary amine-grafted polythiophene (WPT) as a donor and blue fluorescent graphene quantum dots (GQD) as an acceptor spontaneously form co-assembled nanoparticles that function as a highly pH-sensitive and efficient biosensor appropriate for the detection of cancer cells. These WPT/GQD nanoparticles exhibit a number of unique physical characteristics-such as broad-range, tunable GQD-loading contents and particle sizes, extremely low cytotoxicity in normal and cancer cells, and highly sensitive pH-responsiveness and rapid acid-triggered fluorescent behavior under aqueous acidic conditions. We show these features are conferred by self-aggregation of the GQD within the nanoparticles and subsequent aggregation-induced fluorescence of GQD after disassembly of the nanoparticles and dissociation of the D-A interactions under acidic conditions. Importantly, in vitro fluorescence imaging experiments clearly demonstrated the WPT/GQD nanoparticles were gradually taken up into normal and cancer cells in vitro. Selective formation of GQD aggregates subsequently occurred in the acidic microenvironment of the cancer cells and the interior of the cancer cells exhibited strong blue fluorescence; these phenomena did not occur in normal cells. In contrast, pristine WPT and GQD did not exhibit cellular microenvironment-triggered fluorescence transitions in cancer or normal cell lines. Therefore, this newly discovered water-soluble heterojunction system may represent a strongly fluorescent highly pH-sensitive bioprobe for rapid detection of cancer cells.

Conjugated Polymer Nanoparticles for Tumor Theranostics

Water-dispersible conjugated polymer nanoparticles (CPNs) have demonstrated great capabilities in biological applications, such as in vitro cell/subcellular imaging and biosensing, or in vivo tissue imaging and disease treatment. In this review, we summarized the recent advances of CPNs used for tumor imaging and treatment during the past five years. CPNs with different structures, which have been applied to in vivo solid tumor imaging (fluorescence, photoacoustic, and dual-modal) and treatment (phototherapy, drug carriers, and synergistic therapy), are discussed in detail. We also demonstrated the potential of CPNs as cancer theranostic nanoplatforms. Finally, we discussed current challenges and outlooks in this field.

High-precision luminescent covalent organic frameworks with sp2-carbon connection for visual detecting of nereistoxin-related insecticide

A new strategy for nereistoxin-related insecticide, cartap, detection in foodstuff and the environment is of great importance due to its poisoning of human beings through direct exposure or via biomagnification. Herein, a highly planar conjugated sp² carbon-connected COF (F-C_sp²-TT) was synthesized via Knoevenagel condensation reaction followed by the post-modification to develop a new platform for cartap visual detection in agricultural and food samples. The synergistic effect of highly planar conjugation and dense functional groups in the opened framework endowed F-C_sp²-TT with a high-precision luminescence sensing performance. Meanwhile, the exquisitely designed F-C_sp²-TT presented robust chemical stability, radiation stability, and good reproducibility. Benefiting from these advantages, high-precision luminescent F-C_sp²-TT achieves a low detection limit of 0.51 μg/L to cartap over the range of 1-300 μg/L (R²=0.9938), and the recoveries percentage in food products was calculated as 95.90%- 119.3%. More significantly, the smartphone-based high-precision platform by F-C_sp²-TT was established and successfully applied to portable monitoring of cartap and water content. Therefore, our work revealed the enormous potential of C_sp²-connected COF, which opened a new situation for insecticide detection.

Reusable, Ultrasensitive, Patterned Conjugated Polyelectrolyte-Surfactant Complex Film with a Wide Detection Range for Copper Ion Detection

Conjugated polyelectrolytes (CPEs) are emerging as promising materials in the sensor field because they enable high-sensitivity detection of various substances in aqueous media. However, most CPE-based sensors have serious problems in real-world application because the sensor system is operated only when the CPE is dissolved in aqueous media. Here, the fabrication and performance of a water-swellable (WS) CPE-based sensor driven in the solid state are demonstrated. The WS CPE films are prepared by immersing a water-soluble CPE film in cationic surfactants of different alkyl chain lengths in a chloroform solution. The prepared film exhibits rapid, limited water swellability despite the absence of chemical crosslinking. The water swellability of the film enables the highly sensitive and selective detection of Cu²⁺ in water. The fluorescence quenching constant and the detection limit of the film are 7.24 × 10⁶ L mol^-1 and 4.38 nM (0.278 ppb), respectively. Moreover, the film is reusable via a facile treatment. Furthermore, various fluorescent patterns introduced by different surfactants are successfully fabricated by a simple stamping method. By integrating the patterns, Cu²⁺ detection in a wide concentration range (nM-mM) can be achieved.

A Poly(carbazole-alt-triazole) with Thiabendazole Side Groups as an "On-Off-On" Fluorescent Probe for Detection of Cu(II) Ion and Cysteine

A novel conjugated polymer PCZBTA-TBZ containing thiabendazole as recognition unit was synthesized via Suzuki coupling reaction, and its structural characterization, spectroscopic analysis and photophysical properties were investigated. In the metal ion response study, the addition of Cu²⁺ led to the occurrence of the photoinduced electron transfer (PET) mechanism, which significantly quenched the fluorescence of the polymer PCZBTA-TBZ with a quenching effect of 98%. Furthermore, I^- can significantly quench the fluorescence of the polymer, but other anions have no such effect. According to the density functional theory calculation, compared with other polycarbazoles or other alternative copolymers containing carbazole, with alternating carbazole and triazole enhances the electron mobility and reduces the energy band gap of the polymer. Due to the strong coordination ability between Cu²⁺ and Cys, the adding Cys competes the Cu²⁺ in the [PCZBTA-TBZ-Cu²⁺] complex, blocking the occurrence of PET, and the fluorescence intensity of PCZBTA-TBZ is restored. The addition of other amino acids caused almost no change. The polymer is expected to be used for dual fluorescence detection of specific metal ions and Cys.

Lectin-Modified Magnetic Nano-PLGA for Photodynamic Therapy In Vivo

The extreme aggressiveness and lethality of many cancer types appeal to the problem of the development of new-generation treatment strategies based on smart materials with a mechanism of action that differs from standard treatment approaches. The targeted delivery of nanoparticles to specific cancer cell receptors is believed to be such a strategy; however, there are no targeted nano-drugs that have successfully completed clinical trials to date. To meet the challenge, we designed an alternative way to eliminate tumors in vivo. Here, we show for the first time that the targeting of lectin-equipped polymer nanoparticles to the glycosylation profile of cancer cells, followed by photodynamic therapy (PDT), is a promising strategy for the treatment of aggressive tumors. We synthesized polymer nanoparticles loaded with magnetite and a PDT agent, IR775 dye (mPLGA/IR775). The magnetite incorporation into the PLGA particle structure allows for the quantitative tracking of their accumulation in different organs and the performing of magnetic-assisted delivery, while IR775 makes fluorescent in vivo bioimaging as well as light-induced PDT possible, thus realizing the theranostics concept. To equip PLGA nanoparticles with targeting modality, the particles were conjugated with lectins of different origins, and the flow cytometry screening revealed that the most effective candidate for breast cancer cell labeling is ConA, a lectin from Canavalia ensiformis. In vivo experiments showed that after i.v. administration, mPLGA/IR775-ConA nanoparticles efficiently accumulated in the allograft tumors under the external magnetic field; produced a bright fluorescent signal for in vivo bioimaging; and led to 100% tumor growth inhibition after the single session of PDT, even for large solid tumors of more than 200 mm³ in BALB/c mice. The obtained results indicate that the mPLGA/IR775 nanostructure has great potential to become a highly effective oncotheranostic agent.

Polymerization-Enhanced Photophysical Performances of AIEgens for Chemo/Bio-Sensing and Therapy

AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.

Promoter-regulated in vivo asymmetric self-assembly strategy to synthesize heterogeneous nanoparticles for signal amplification

Signal amplification is commonly used to enhance the sensitivity of biological analysis. Here, we present a strategy involving in vivo asymmetric self-assembly combined with promoter strength regulation to synthesize heterogeneous nanoparticles for signal amplification. Two expression vectors were constructed by genetically inserting, respectively, signal and binding molecules into the hepatitis B core antigen protein (HBcAg) structure. Because of differential expression of the two recombinant proteins in the presence of a strong promoter (T7) and a weak promoter (Tac-1) and spontaneous asymmetric self-assembly in vivo, heterogeneous HBcAg nanoparticles (NPs) with a high ratio of signal-bearing to target-binding molecules were obtained. These nanoparticles contained a large number of green fluorescent proteins as signal molecules and a small number of B1 immunoglobulin-binding domains from protein G for antibody binding, thus enabling sensitive immunoassays. As a proof of concept, improved sensitivity for antibody detection was achieved using the heterogeneous nanoparticle conjugated with a secondary antibody molecule.

Aggregation and Binding-Directed FRET Modulation of Conjugated Polymer Materials for Selective and Point-of-Care Monitoring of Serum Albumins

Nonspecific interactions of conjugated polymers (CPs) with various proteins prove to be a major impediment for researchers when designing a suitable CP-based probe for the amplified and selective recognition of particular proteins in complex body fluids. Herein, a new strategy is presented for the precise and specific monitoring of clinically important serum albumin (SA) proteins at the nanomolar level using fluorescence resonance energy transfer (FRET)-modulated CP-surfactant ensembles as superior sensing materials. In brief, the newly designed color-tunable CP PF-DBT-Im undergoes intense aggregation with the surfactant sodium dodecyl sulfate (SDS), enabling drastic change in the emission color from violet to deep red due to intermolecular FRET. The emission of PF-DBT-Im/SDS ensembles then changed from deep red to magenta specifically on addition of SAs owing to the exclusive reverse FRET facilitated by synergistic effects of electrostatic interactions, hydrophobic forces, and the comparatively high intrinsic quantum yield of SAs. Interestingly, PF-DBT-Im itself could not differentiate SAs from other proteins, demonstrating the superiority of the PF-DBT-Im/SDS self-assembly over PF-DBT-Im. Finally, an affordable smartphone-integrated point-of-care (PoC) device is also fabricated as a proof-of-concept for the on-site and rapid monitoring of SAs, validating the potential of the system in long-term clinical applications.

Effects of Neutral, Anionic and Cationic Polymer Brushes Grafted from Poly(para-phenylene vinylene) and Poly(para-phenylene ethynylene) on the Polymer’s Photoluminescent Properties

The conformation of a fluorescent polymer, in the solid state or in solution, plays a critical role in the polymer’s fluorescent properties. Thus, grafted side chains on a fluorescent polymer can directly influence its optical properties. In this study, the effect of grafted polymeric side chains on the photoluminescent properties of poly(para-phenylene vinylene) (PPV) and poly(para-phenylene ethynylene) (PPE) were investigated. Low- and high-molecular-weight grafts of neutral poly(n-butyl acrylate), cationic poly(trimethylaminoethyl methacrylate) and anionic poly(sulfopropyl acrylate) were grafted onto PPVs and PPEs, and the effect of the grafting on the graft copolymer’s absorption and emission wavelengths, the fluorescence intensity and the quantum yield were studied. The results indicate that in the case of the ionic grafts, contrary to the expectations, the polymers have a reduced quantum yield. This contrasts with the copolymers with uncharged side chains (PnBA), where a major increase in the quantum yield is seen for the self-quenching conjugated pristine polymers. These results reinforce that the molecular conformation of the polymer in a solid or solution plays a critical role in fluorescent polymers photoluminescent properties.

Chiral emergence in multistep hierarchical assembly of achiral conjugated polymers

Intimately connected to the rule of life, chirality remains a long-time fascination in biology, chemistry, physics and materials science. Chiral structures, e.g., nucleic acid and cholesteric phase developed from chiral molecules are common in nature and synthetic soft materials. While it was recently discovered that achiral but bent-core mesogens can also form chiral helices, the assembly of chiral microstructures from achiral polymers has rarely been explored. Here, we reveal chiral emergence from achiral conjugated polymers, in which hierarchical helical structures are developed through a multistep assembly pathway. Upon increasing concentration beyond a threshold volume fraction, dispersed polymer nanofibers form lyotropic liquid crystalline (LC) mesophases with complex, chiral morphologies. Combining imaging, X-ray and spectroscopy techniques with molecular simulations, we demonstrate that this structural evolution arises from torsional polymer molecules which induce multiscale helical assembly, progressing from nano- to micron scale helical structures as the solution concentration increases. This study unveils a previously unknown complex state of matter for conjugated polymers that can pave way to a field of chiral (opto)electronics. We anticipate that hierarchical chiral helical structures can profoundly impact how conjugated polymers interact with light, transport charges, and transduce signals from biomolecular interactions and even give rise to properties unimagined before.

Functionalization of Water-Soluble Conjugated Polymers for Bioapplications

Water-soluble conjugated polymers (WS-CPs) have found widespread use in bioapplications ranging from in vitro optical sensing to in vivo phototherapy. Modification of WS-CPs with specific molecular functional units is necessary to enable them to interact with biological targets. These targets include proteins, nucleic acids, antibodies, cells, and intracellular components. WS-CPs have been modified with covalently linked sugars, peptides, nucleic acids, biotin, proteins, and other biorecognition elements. The objective of this article is to comprehensively review the various synthetic chemistries that have been used to covalently link biofunctional groups onto WS-CP platforms. These chemistries include amidation, nucleophilic substitution, Click reactions, and conjugate addition. Different types of WS-CP backbones have been used as platforms including poly(fluorene), poly(phenylene ethynylene), polythiophene, poly(phenylenevinylene), and others. Example applications of biofunctionalized WS-CPs are also reviewed. These include examples of protein sensing, flow cytometry labeling, and cancer therapy. The major challenges and future development of functionalized conjugated polymers are also discussed.

Synthesis of tetraphenylethene-based D-A conjugated molecules with near-infrared AIE features, and their application in photodynamic therapy

Herein, five aggregation-induced emission (AIE) photosensitizers (PSs) with D-π-A structures are smoothly designed and synthesized through donor and acceptor engineering. The photophysical properties and theoretical calculation results show that the synergistic effect of methoxy substituted tetraphenylethene (MTPE), 3,4-ethylenedioxythiophene can enhance the intramolecular charge transfer effect (ICT), and promote the intersystem crossing (ISC) process of the whole molecule. In these AIE-PSs, the best-performing AIE-PS (MTPE-DT-Py) has bright NIR (740 nm) emission, the highest ¹O₂ generation efficiency (5.9-fold that of Rose Bengal) and efficient mitochondrial targeting ability. Subsequently, PDT anti-cancer and anti-bacterial experiments indicate that MTPE-DT-Py could obviously target mitochondria and kill breast cancer cells (MCF-7), and selectively inactivate S. aureus (G(+)) under white light irradiation. This work mainly proposes a practical design strategy for high effect AIE-PSs and provides more excellent candidates for fluorescence imaging-guided photodynamic therapy.

Interfaces Based on Laser-Structured Arrays of Carbon Nanotubes with Albumin for Electrical Stimulation of Heart Cell Growth

Successful formation of electronic interfaces between living cells and electronic components requires both good cell viability and performance level. This paper presents a technology for the formation of nanostructured arrays of multi-walled carbon nanotubes (MWCNT) in biopolymer (albumin) layer for higher biocompatibility. The layer of liquid albumin dispersion was sprayed on synthesized MWCNT arrays by deposition system. These nanostructures were engineered using the nanosecond pulsed laser radiation mapping in the near-IR spectral range (λ = 1064 nm). It was determined that the energy density of 0.015 J/cm² provided a sufficient structuring of MWCNT. The structuring effect occurred during the formation of C–C bonds simultaneously with the formation of a cellular structure of nanotubes in the albumin matrix. It led to a decrease in the nanotube defectiveness, which was observed during the Raman spectroscopy. In addition, laser structuring led to a more than twofold increase in the electrical conductivity of MWCNT arrays with albumin (215.8 ± 10 S/m). Successful electric stimulation of cells on the interfaces with the system based on a culture plate was performed, resulting in the enhanced cell proliferation. Overall, the MWCNT laser-structured arrays with biopolymers might be a promising material for extended biomedical applications.

Molecular Programming of NIR-IIb-Emissive Semiconducting Small Molecules for In Vivo High-Contrast Bioimaging Beyond 1500 nm

Materials with long-wavelength second near-infrared (NIR-II) emission are highly desired for in vivo dynamic visualizating of microstructures in deep tissues. Herein, by employing an atom-programming strategy, a series of highly fluorescent semiconducting oligomers (SOMs) with tunable NIR-IIb emissions are developed for bioimaging applications. After self-assembly into nanoparticles (NPs), they show good brightness, high photostability, and satisfactory biocompatibility. The SOM NPs are applied as probes for high-resolution imaging of whole-body and hind-limb blood vessels, biliary tract, and bladder with their emissions over 1500 nm. This work demonstrates an atom-programming strategy for constructing semiconducting small molecules with enhanced NIR-II fluorescence for deep-tissue imaging, affording new insight for advancing molecular design of NIR-II fluorophores.

Surfactant-Modulated a Highly Sensitive Fluorescent Probe of Fully Conjugated Covalent Organic Nanosheets for Detecting Copper Ions in Aqueous Solution

Efficient detection of aqueous copper ions is of high significance for environmental and human health, since copper is involved in potent redox activity in physiological and pathological processes. Covalent organic frameworks (COFs) have shown advantages in efficient capturing and detecting of copper ions due to their large surface area, robust chemical stability, and high sensitivity, but most of them are hydrophobic, leading to the limitation in sensing copper ions in aqueous media. Herein, the design and synthesis of an sp² -carbon conjugated COF (sp² -TPE-COF) are reported with surfactant-assisted water dispersion for detecting traces of copper ions based on the photo-induced electron transfer (PET) mechanism. Importantly, the olefin-linked conjugated backbone of sp² -TPE-COF works as a signal amplified transducer for metal ion sensing. Notably, it is found that a surfactant-assisted strategy can greatly enhance COF's dispersion in aqueous solution and finely modulate their sensitivity with a significantly improved K_SV to 15.15 × 10⁴ m^-1 in SDBS (sodium dodecyl benzene sulfonate) solution, the value of which is larger than that of a majority of COF/MOF based sensors for copper ions. This research demonstrates the promise of surfactant modulated fully π-conjugated COFs for sensing applications.

Light-Harvesting Fluorescent Spherical Nucleic Acids Self-Assembled from a DNA-Grafted Conjugated Polymer for Amplified Detection of Nucleic Acids

The ultralow concentration of nucleic acids in complex biological samples requires fluorescence probes with high specificity and sensitivity. Herein, a new kind of spherical nucleic acids (SNAs) is developed by using fluorescent π-conjugated polymers (FCPs) as a light-harvesting antenna to enhance the signal transduction of nucleic acid detection. Specifically, amphiphilic DNA-grafted FCPs are synthesized and self-assemble into FCP-SNA structures. Tuning the hydrophobicity of the graft copolymer can adjust the size and light-harvesting capability of the FCP-SNAs. We observe that more efficient signal amplification occurs in larger FCP-SNAs, as more chromophores are involved, and the energy transfer can go beyond the Förster radius. Accordingly, the optimized FCP-SNA shows an antenna effect of up to 37-fold signal amplification and the limit of detection down to 1.7 pM in microRNA detection. Consequently, the FCP-SNA is applied to amplified in situ nucleic acid detecting and imaging at the single-cell level.

Amplified Fluorescence in Situ Hybridization by Small and Bright Dye-Loaded Polymeric Nanoparticles

Detection and imaging of RNA at the single-cell level is of utmost importance for fundamental research and clinical diagnostics. Current techniques of RNA analysis, including fluorescence in situ hybridization (FISH), are long, complex, and expensive. Here, we report a methodology of amplified FISH (AmpliFISH) that enables simpler and faster RNA imaging using small and ultrabright dye-loaded polymeric nanoparticles (NPs) functionalized with DNA. We found that the small size of NPs (below 20 nm) was essential for their access to the intracellular mRNA targets in fixed permeabilized cells. Moreover, proper selection of the polymer matrix of DNA-NPs minimized nonspecific intracellular interactions. Optimized DNA-NPs enabled sequence-specific imaging of different mRNA targets (survivin, actin, and polyA tails), using a simple 1 h staining protocol. Encapsulation of cyanine and rhodamine dyes with bulky counterions yielded green-, red-, and far-red-emitting NPs that were 2-100-fold brighter than corresponding quantum dots. These NPs enabled multiplexed detection of three mRNA targets simultaneously, showing distinctive mRNA expression profiles in three cancer cell lines. Image analysis confirmed the single-particle nature of the intracellular signal, suggesting single-molecule sensitivity of the method. AmpliFISH was found to be semiquantitative, correlating with RT-qPCR. In comparison with the commercial locked nucleic acid (LNA)-based FISH technique, AmpliFISH provides 8-200-fold stronger signal (dependent on the NP color) and requires only three steps vs ∼20 steps together with a much shorter time. Thus, combination of bright fluorescent polymeric NPs with FISH yields a fast and sensitive single-cell transcriptomic analysis method for RNA research and clinical diagnostics.

Strategies to Improve Photodynamic Therapy Efficacy of Metal-Free Semiconducting Conjugated Polymers

Photodynamic therapy (PDT) is a noninvasive therapy for cancer and bacterial infection. Metal-free semiconducting conjugated polymers (SCPS) with good stability and optical and electrical properties are promising photosensitizers (PSs) for PDT compared with traditional small-molecule PSs. This review analyzes the latest progress of strategies to improve PDT effect of linear, planar, and three-dimensional SCPS, including improving solubility, adjusting conjugated structure, enhancing PS-doped SCPs, and combining therapies. Moreover, the current issues, such as hypoxia, low penetration, targeting and biosafety of SCPS, and corresponding strategies, are discussed. Furthermore, the challenges and potential opportunities on further improvement of PDT for SCPs are presented.

Modulating the optical properties and functions of organic molecules through polymerization

Organic functional materials with advanced optical properties have attracted much attention due to their broad applications, such as in light-emitting diodes, solar cells, anti-counterfeiting, photocatalysis, and even disease diagnosis and treatment. Recent research has revealed that many optical properties of organic molecules can be improved through simple polymerization. In this review, we discuss the phenomenon, mechanism, and impact of polymerization on the properties of materials, including the polymerization-induced spectral shift, polymerization-enhanced photosensitization, polymerization-enhanced two-photon absorption, polymerization-enhanced photocatalytic efficiency, polymerization-induced room temperature phosphorescence, polymerization-induced thermally activated delayed fluorescence, and polymerization-induced emission using specific examples with different applications. The new opportunities arising from polymerization in designing high performance optical materials are summarized in the future perspective.

From main chain conjugated polymer photosensitizer to hyperbranched one: the expansion of polymerization-enhanced photosensitization effect for photodynamic therapy

Three conjugated polymers with the same donor-acceptor structure but totally different architectures are design to show both Type-I and Type-II photosensitization abilities simultaneously, among which the hyperbranched polymer shows the...

Aggregation-Induced Emission-Active Poly(phenyleneethynylene)s for Fluorescence and Raman Dual-Modal Imaging and Drug-Resistant Bacteria Killing

Poly(phenyleneethynylene) (PPE) is a widely used functional conjugated polymer with applications ranging from organic optoelectronics and fluorescence sensors to optical imaging and theranostics. However, the fluorescence efficiency of PPE in aggregate states is generally not as good as their solution states, which greatly compromises their performance in fluorescence-related applications. Herein, a series of PPE derivatives with typical aggregation-induced emission (AIE) properties is designed and synthesized. In these PPEs, the diethylamino-substituted tetraphenylethene units function as the long-wavelength AIE source and the alkyl side chains serve as the functionalization site. The obtained AIE-active PPEs with large π-conjugation show strong aggregate-state fluorescence, interesting self-assembly behaviors, inherently enhanced alkyne vibrations in the Raman-silent region of cells, and efficient antibacterial activities. The PPE nanoparticles with good cellular uptake capability can clearly and sensitively visualize the tumor region and residual tumors via their fluorescence and Raman signals, respectively, to benefit the precise tumor resection surgery. After post-functionalization, the obtained PPE-based polyelectrolyte can preferentially image bacteria over mammalian cells and possesses efficient photodynamic killing capability against Gram-positive and drug-resistant bacteria. This work provides a feasible design strategy for developing functional conjugated polymers with multimodal imaging capability as well as photodynamic antimicrobial ability.

Recent Advances in Hypoxia-Overcoming Strategy of Aggregation-Induced Emission Photosensitizers for Efficient Photodynamic Therapy

Hypoxia is an inherent physiologic barrier in the microenvironment of solid tumor and has badly restricted the therapeutic effect of photodynamic therapy (PDT). Meanwhile, the photosensitizer (PS) agents used for PDT applications regularly encounter the tiresome aggregation-caused quenching effect that seriously decreases the production efficiency of cytotoxic reactive oxygen species. The aggregation-induced emission (AIE) PSs with antiquenching characteristics in the aggregate state are considered as a promising tool for achieving highly efficient PDT applications, and plenty of studies have widely demonstrated their advantages in various diseases. Herein, the recent progress of AIE PSs in the battle of antitumor hypoxia issue is summarized and the practical molecular principles of hypoxia-overcoming AIE PSs are highlighted. According to the hypoxia-overcoming mechanism, these representative cases are divided into low O₂ -dependent (type I PDT) and O₂ -dependent tactics (mainly including O₂ -enrichment type II PDT and combination therapy). Furthermore, the underlying challenges and prospects of AIE PSs in hypoxia-overcoming PDT are proposed and thus expect to promote the next development of AIE PSs.

AIE active polymers for biological applications

The discovery of aggregation-induced emission (AIE) phenomenon, significantly altered the understanding of the scientific world about the luminophore aggregation. Polymers with AIE features have recently emerged as promising materials with wide range of applications in optoelectronics devices, chemosensors, bioimaging, cancer theranostics and drug delivery. By introducing the AIE active molecule into the polymer structure, novel materials encompassing the characteristics properties of both the functional materials such as excellent brightness, versatile structure modification, high biocompatibility, exceptional stability and facile processability are achieved. This chapter presents the advances in synthetic design as well as potential biological applications of AIE active polymers, beginning with a brief introduction to the AIE phenomenon. The versatile synthetic route, easier functionalization, and light up feature of the AIE active polymers offer direct visualization of the physiological processes within or outside the living organisms. This chapter also precisely describes the photodynamic therapy/photothermal therapy (PDT/PTT) with up-to-date advancement of AIE active polymer and their emerging applications in biomedical field. The AIE active Photosensitizers (PSs) are much more efficient in singlet oxygen (¹O₂) production than their small molecule AIE active PSs due to their enhanced inter system crossing (ISC) process and improved light-harvesting ability. Additionally, the present chapter aims to focus on all recent AIE active polymers for drug screening and drug delivery. The AIE active polymer often shows decent drug loading capacity, high stability and good biocompatibility comprising image guided drug monitoring features. Lastly, the concluding discussion reveals the future prospective of the AIE active polymers.

Back-and-Forth Energy Transfer during Electronic Relaxation in a Chlorin-Perylene Dyad

Donor-acceptor dyads represent a practical approach to tuning the photophysical properties of linear conjugated polymers in materials chemistry. Depending on the absorption wavelength, the acceptor and donor roles can be interchanged, and as such, the directionality of the energy transfer can be controlled. Herein, nonadiabatic excited state molecular dynamics simulations have been performed in an arylethylene-linked perylene-chlorin dyad. After an initial photoexcitation at the Soret band of chlorin, we observe an ultrafast sequential electronic relaxation to the lowest excited state. This process is accomplished through an efficient round-trip chlorin-to-perylene-to-chlorin energy transfer. It is characterized by successive intermittent localized and delocalized vibronic dynamics. Nonradiative relaxation takes place mainly through energy transfer events with perylene acting as a "heat sink" through which the nonradiative relaxation is efficiently funneled, and the excess energy is dispersed in a larger space of vibrational degrees of freedom. Thus, our findings suggest the use of donor-acceptor dyads as a useful strategy when one needs to deactivate an electronic excitation.

Polymer Dots with Enhanced Photostability, Quantum Yield, and Two-Photon Cross-Section using Structurally Constrained Deep-Blue Fluorophores

Semiconducting polymer dots (Pdots) have emerged as versatile probes for bioanalysis and imaging at the single-particle level. Despite their utility in multiplexed analysis, deep blue Pdots remain rare due to their need for high-energy excitation and sensitivity to photobleaching. Here, we describe the design of deep blue fluorophores using structural constraints to improve resistance to photobleaching, two-photon absorption cross sections, and fluorescence quantum yields using the hexamethylazatriangulene motif. Scanning tunneling microscopy was used to characterize the electronic structure of these chromophores on the atomic scale as well as their intrinsic stability. The most promising fluorophore was functionalized with a polymerizable acrylate handle and used to give deep-blue fluorescent acrylic polymers with M_n > 18 kDa and Đ < 1.2. Nanoprecipitation with amphiphilic polystyrene-graft-(carboxylate-terminated poly(ethylene glycol)) gave water-soluble Pdots with blue fluorescence, quantum yields of 0.81, and molar absorption coefficients of (4 ± 2) × 10⁸ M^-1 cm^-1. This high brightness facilitated single-particle visualization with dramatically improved signal-to-noise ratio and photobleaching resistance versus an unencapsulated dye. The Pdots were then conjugated with antibodies for immunolabeling of SK-BR3 human breast cancer cells, which were imaged using deep blue fluorescence in both one- and two-photon excitation modes.

An ethanethioate functionalized polythiophene as an optical probe for sensitive and fast detection of water content in organic solvents

A new polythiophene-based optical probe, namely PTS, was designed and prepared for detection and quantification of the water present in organic solvents. PTS exhibited sensitive and fast absorption and fluorescence signaling response to the changes of water content in tetrahydrofuran (THF), N,N-dimethylformamide (DMF) and N,N-dimethylacetamide (DMAc) due to the water-induced interpolymer-stacking aggregation as demonstrated by dynamic light scattering (DLS) analysis. The fluorescence intensity of PTS at 550 nm linearly reduced as a function of the water content in detection ranges of 0-30% (v/v) in THF, 0-10% in DMF and 0-10% in DMAc with the limit of detection (LOD) for water being 0.034% (v/v) in THF, 0.013% (v/v) in DMF, and 0.014% (v/v) in DMAc, respectively. Additionally, PTS-incorporated test paper was fabricated to successfully achieve naked-eye detection of water in DMF and DMAc. PTS was further applied to estimate the water content in real samples, convincingly demonstrating that our method was comparable with the standard Karl Fischer titration.

Nanobody modified high-performance AIE photosensitizer nanoparticles for precise photodynamic oral cancer therapy of patient-derived tumor xenograft

Photodynamic therapy (PDT) is a promising noninvasive treatment option for patients suffering from superficial tumors, such as oral cancer. However, for photosensitizers (PSs), it remains a grand challenge to simultaneously excel in all the key performance indicators including effective singlet oxygen (¹O₂) generation under clinical laser, specific targeting function and stable far-red (FR)/near-infrared (NIR) emission with low dark toxicity. In addition, traditional PS nanoparticles (NPs) for clinical use suffer from quenched fluorescence and reduced ¹O₂ production caused by molecular aggregation. To address these issues, AIEPS5 with aggregation-induced FR/NIR emission and effective ¹O₂ generation under 532 nm laser irradiation is designed by precise optimization of the chemical structure. By attaching a polyethylene glycol (PEG) chain onto AIEPS5, the yielded amphiphilic AIEPS5-PEG2000 can spontaneously self-assemble into water dispersible NPs, which are further endowed with targeted delivery function via the decoration of anti-Her-2 nanobody (NB). The bespoke AIEPS5-NPs-NB exhibit effective ¹O₂ generation capability, bright FR/NIR emission centered at 680 nm, and negligible dark toxicity, which outperform Heimbofen, a clinically approved PS in PDT using a patient-derived tumor xenograft model.

Conjugated Polymers with Aggregation-Induced Emission Characteristics for Fluorescence Imaging and Photodynamic Therapy

Accurate diagnosis and treatment have been extensively developed in the field of biomedicine, which put forward higher requirements for the development of biomedical materials with high efficiency and selectivity. Among them, conjugated polymers featuring aggregation-induced emission (AIE) characteristics (AIE conjugated polymers) have stood out in recent years owing to their unique properties, such as intense solid emission, high light-harvesting ability, efficient energy transfer, and high ¹ O₂ generation ability, which empower them with effective biomedical functions in fluorescence imaging (FLI), photodynamic therapy (PDT), FLI-guided PDT, two-photon excited photodynamic therapy (2PE-PDT), etc. In this review, we highlight recent progress in AIE conjugated polymers and their applications in anticancer and antibacterial areas based on FLI and PDT, and summarize the mechanism of color-tuned fluorescence emission and efficient ¹ O₂ generation ability. The challenges and perspectives for the future development of AIE conjugated polymers are also discussed.

Optical Biosensors for Virus Detection: Prospects for SARS-CoV-2/COVID-19

The recent pandemic of the novel coronavirus disease 2019 (COVID-19) has caused huge worldwide disruption due to the lack of available testing locations and equipment. The use of optical techniques for viral detection has flourished in the past 15 years, providing more reliable, inexpensive, and accurate detection methods. In the current minireview, optical phenomena including fluorescence, surface plasmons, surface-enhanced Raman scattering (SERS), and colorimetry are discussed in the context of detecting virus pathogens. The sensitivity of a viral detection method can be dramatically improved by using materials that exhibit surface plasmons or SERS, but often this requires advanced instrumentation for detection. Although fluorescence and colorimetry lack high sensitivity, they show promise as point-of-care diagnostics because of their relatively less complicated instrumentation, ease of use, lower costs, and the fact that they do not require nucleic acid amplification. The advantages and disadvantages of each optical detection method are presented, and prospects for applying optical biosensors in COVID-19 detection are discussed.

Red-Emitting, Acene-Doped Conjugated Polymer Nanoparticles that Respond Ratiometrically to Photogenerated 1O2

Fluorophores that respond to external stimuli on demand have numerous applications in imaging and chemical or biological sensing. In this paper, we describe conjugated polymer nanoparticles (CPNs) that comprise a donor polymer matrix and a red-fluorescent, singlet oxygen-reactive heteroacene dopant (DE-TMT) that display a ratiometric response upon photo-oxidation. This ratiometric response can be tuned by the level of doping of DE-TMT, the identity of the conjugated polymer matrix used, and the blending of two conjugated polymers together to access red-shifted emission wavelengths. We followed a rational design process that combined (i) fundamental understanding of the influence of the chemical structure on luminescence spectra and efficiencies, energy transfer efficiencies, and reactivity and (ii) systematically determining how blending multiple chromophores in nanoparticles influences energy transfer efficiencies and the speed of optical responses to irradiation. Our approach of refining the compositions of these nanoparticles has yielded materials that combine many desirable characteristics for analytical applications-utility in aqueous environments, high quantum yield, emission of red light, and ratiometric luminescent responses. We anticipate that the type of approach described herein can be of use to others in designing CPNs for luminescence applications.

New Hybrid Copper Nanoparticles/Conjugated Polyelectrolyte Composite with Antibacterial Activity

In the search for new materials to fight against antibiotic-resistant bacteria, a hybrid composite from metallic copper nanoparticles (CuNPs) and a novel cationic π-conjugated polyelectrolyte (CPE) were designed, synthesized, and characterized. The CuNPs were prepared by chemical reduction in the presence of CPE, which acts as a stabilizing agent. Spectroscopic analysis and electron microscopy showed the distinctive band of the metallic CuNP surface plasmon and their random distribution on the CPE laminar surface, respectively. Theoretical calculations on CuNP/CPE deposits suggest that the interaction between both materials occurs through polyelectrolyte side chains, with a small contribution of its backbone electron density. The CuNP/CPE composite showed antibacterial activity against Gram-positive (Staphylococcus aureus and Enterococcus faecalis) and Gram-negative (Escherichia coli and Salmonella enteritidis) bacteria, mainly attributed to the CuNPs’ effect and, to a lesser extent, to the cationic CPE.

Recent advances in semiconducting polymer dots as optical probes for biosensing

This review mainly summarized the recent results that used bright polymer dots (Pdots) for the detection of different analytes such as reactive oxygen species (ROS), metal ions, pH values, and a variety of biomolecules.