Preparation of budesonide- and indomethacin-hydroxypropyl-beta-cyclodextrin (HPBCD) complexes using a single-step, organic-solvent-free supercritical fluid process

Effect of Solubility Improvement via Formation of an Amorphous Composite of Indomethacin and Sulindac on Membrane Permeability

The importance of permeability as well as solubility of the drug has been recognized in improving the solubility of poorly water-soluble drugs. This study investigated the impact of amorphous composites of indomethacin (IMC) and sulindac (SLD) on the membrane permeability of drugs. The IMC/SLD (1/1) formulation prepared by dry grinding was amorphous with a single glass transition temperature. The Fourier transform IR spectra and Raman spectra revealed formation of hydrogen bonds between the OH group of IMC and the carbonyl group of SLD. These results suggest that an amorphous composite was formed between IMC and SLD through hydrogen bonding. The amount of dissolved IMC and SLD from the amorphous composite of IMC/SLD (1/1) was higher than that of the untreated IMC or SLD in the dissolution test. The permeated amounts and permeation rates of both drugs were enhanced by increasing the solubility of the amorphous composite. Conversely, the apparent membrane permeability coefficients (P_app) were almost same for untreated drugs and amorphous composites. In the case of hydroxypropyl-β-cyclodextrin and sodium dodecyl sulfate, P_app of the drugs decreased with the addition of these compounds, although the drug solubility was enhanced by the solubilization effect. This study revealed that an amorphous composite formed through hydrogen bonding is an attractive pharmaceutical way to enhance the permeated amount and permeation rate without changing the P_app of both the drugs.

Direct cyclodextrin based powder extrusion 3D printing of budesonide loaded mini-tablets for the treatment of eosinophilic colitis in paediatric patients

The purpose of this study was to combine direct powder extrusion (DPE) 3D printing and fluid bed coating techniques to create a budesonide (BD) loaded solid oral formulations for the treatment of eosinophilic colitis (EC) in paediatric patients. The preferred medication for EC treatment is BD, which has drawbacks due to its poor water solubility and low absorption. Additionally, since commercially available medications for EC treatment are created and approved for adult patients, administering them to children sometimes requires an off-label use and an impromptu handling, which can result in therapeutic ineffectiveness. The DPE 3D approach was investigated to create Mini-Tablets (MTs) to suit the swallowing, palatability, and dose flexibility control requirements needed by paediatric patients. Additionally, DPE 3D and the inclusion of hydroxypropyl-β-cyclodextrin in the initial powder mixture allowed for an improvement in the solubility and rate of BD dissolution in aqueous medium. Then, to accomplish a site-specific drug release at the intestinal level, MTs were coated with a layer of Eudragit FS 30D, an enteric polymer responsive at pH > 7.0 values. In vitro release experiments showed that film-coated MTs were suitable in terms of size and dose, enabling potential therapeutic customization and targeted delivery of BD to the colon.

Hydroxypropyl Beta Cyclodextrin as a Potential Surface Modifier for Paclitaxel Nanocrystals

Paclitaxel (PTX) is a hydrophobic chemotherapeutic agent cytotoxic against many serious cancers. This study aimed at designing novel PTX nanocrystals (PTX-NCs) coated with the biocompatible and biodegradable hydroxypropyl-beta-cyclodextrin (HPβCD) polymer with specific characteristics through the formation of a non-inclusion complex. Briefly, PTX-NCs were prepared by the anti-solvent method followed by homogenization. Then, the surface of the prepared PTX-NCs was modified using the HPβCD coat (HPβCD-PTX-NCs). The prepared nanocrystals, both coated and uncoated, were characterized in terms of size, polydispersity index, charge, morphology, and stability. Moreover, the nanocrystals were investigated using powder X-ray diffraction (PXRD), differential scanning calorimeter (DSC), and Fourier transform infrared spectroscopy (FTIR). As well, the in vitro release of PTX from the nanocrystals was determined under conditions similar to the IV route of administration. Furthermore, the tendency of the nanocrystals to induce hemolysis was investigated. Results indicated that the size was about 241.4 and 310.5 nm, the polydispersity index was 0.14 and 0.21, and the zeta potential was about - 22.6 and - 16.4 mV for PTX-NCs and HPβCD-PTX-NCs, respectively. Additionally, the PXRD, FTIR, and DSC profiles can be explained by the NCs' integrity and coat formation. The SEM images showed that both PTX-NCs and HPβCD-PTX-NCs have rod-like structures. Moreover, HPβCD-PTX-NCs had significantly superior in vitro release than both PTX-NCs and PTX. Interestingly, the hemolytic assay showed that HPβCD-PTX-NCs had a more efficient and safer profile than PTX-NCs. This study emphasized that HPβCD could be an interesting candidate for the surface modification of PTX-NCs providing superior properties such as release and safety profiles.

Immediate Release Formulation of Inhaled Beclomethasone Dipropionate-Hydroxypropyl-Beta-Cyclodextrin Composite Particles Produced Using Supercritical Assisted Atomization

In this study, the enhanced solubilization performance of a poorly soluble drug, beclomethasone dipropionate (BDP), was investigated using hydroxypropyl-β-cyclodextrin (HP-β-CD) and ethanol. The enhanced solubility of the drug was determined using the phase solubility method and correlated as a function of both HP-β-CD and ethanol concentrations. The effective progress of drug solubility originated from the formation of cyclodextrin and BDP inclusion complexes and increase in the lipophilicity of the medium, by aqueous ethanol, for hydrophobic BDP. BDP and HP-β-CD composite particles were produced using supercritical assisted atomization (SAA) with carbon dioxide as the spraying medium, 54.2% (w/w) aqueous ethanol as the solvent, and an optimal amount of the dispersion enhancer leucine. The effect of the mass ratio of HP-β-CD to BDP (Z) on the in vitro aerosolization and in vitro dissolution performance of BDP-HP-β-CD composite particles was evaluated. The aerosolization performance showed that the fine particles fraction (FPF) of the composite particles increased with increasing mass ratio. The water-soluble excipient (HP-β-CD) effectively enhance the dissolution rate of BDP from composite particles. This study suggests that BDP-HP-β-CD composite particles produced using SAA can be employed in immediate-release drug formulations for pulmonary delivery.

Preparation and characterization of colon-targeted pH/Time-dependent nanoparticles using anionic and cationic polymethacrylate polymers

Inflammatory bowel disease (IBD), which is a chronic inflammatory disease of the gastrointestinal system, has two subtypes: Ulcerative Colitis (UC) and Crohn's Disease (CD). Only pH-sensitive drug delivery systems are commonly utilized for the treatment of IBD, but their effectiveness is frequently obstructed by the change in intestinal pH. To overcome the inadequacy of only pH-dependent delivery systems, we developed in vitro evaluated both pH- and time-dependent nanoparticles loaded budesonide (BUD) for the treatment of IBD in this study. Anionic polymethacrylate was utilized as a pH-dependent polymer whereas cationic polymethacrylate was utilized as a time-dependent sustained release polymer. Nanoparticles were prepared through a single oil-in-water emulsion/solvent evaporation method. The encapsulation efficiency, mean particle size, zeta potential, polydispersity index (PDI), drug release profiles, drug release kinetics, and stability of these nanoparticles were investigated. In all formulations, mean particle sizes were below 250 nm and PDI values were between 0.1 and 0.3. Nanoparticles containing 90% anionic-10% cationic polymethacrylate polymers inhibited burst BUD release under acidic conditions and exhibited sustained drug release at neutral pH. Consequently, in the medication of IBD, BUD-loaded pH and time-dependent nanoparticles may be a promising choice as a drug delivery system.

Cyclodextrin/Adamantane-Grafted Polyethylene Glycol-Based Self-assembling Constructs for Topical Delivery of Ketorolac Tromethamine: Formulation, Characterization, and In Vivo Studies

Topical formulation of non-steroidal anti-inflammatory drugs (NSAIDs) exhibits many advantages over the oral administration route, such as avoiding the direct effect on GIT and avoiding the poor oral bioavailability of such drugs. Our study aims to develop a new self-assembling construct based on the hydrophobic interaction between adamantane terminated poly (ethylene glycol) polymers and polymerized β-cyclodextrin. The viscous constructs were developed from direct mixing of host and guest polymer solutions, indicating spontaneous formation without cross-linkers. The modified system was evaluated by different analyses, including X-ray diffractometry, electron microscopy, isothermal titration calorimetry, and rheological analysis. Moreover, such a system's ability for drug loading and release was investigated via the in vitro release of ketorolac tromethamine (KT) as a model of NSAIDs. Finally, the prepared formulas were applied on a rat paw edema model to prove the enhanced anti-inflammatory activities. The obtained results indicated that the modified constructs have a rubbery porous structure with an amorphous nature. Also, from rheological results, the modified system exhibited a viscous behavior with higher loss modulus (G″) compared with storage (G'). The inclusion complexation between cyclodextrin and adamantane moieties was proved by the recorded high binding constants with a 1:1 stoichiometric ratio. Furthermore, the results showed the successful KT incorporation into the modified system and quantitatively released through a semi-permeable membrane in a sustained fashion (over 24 h). Finally, the in vivo results of the medicated constructs showed a significant inhibition of the induced inflammation and swelling, indicating that the modified construct has a great utility for safe non-irritating topical delivery applications.

A critical review on the particle generation and other applications of rapid expansion of supercritical solution

The novel particle generation processes of Active Pharmaceutical Ingredient (API)/drug have been extensively explored in recent decades due to their wide-range applications in the pharmaceutical industry. The Rapid Expansion of Supercritical Solutions (RESS) is one of the promising techniques to obtain the fine particles (micro to nano-size) of APIs with narrow particle size distribution (PSD). In RESS, supercritical carbon dioxide (SC CO₂) and API are used as solvent and solute respectively. In this literature survey, the application of RESS in the formation of fine particles is critically reviewed. Solubility of API in SC CO₂ and supersaturation are the key factors in tuning the particle size. The different approaches to model and predict the solubility of API in SC CO₂ are discussed. Then, the effect of process parameters on mean particle size and the particle size distribution are interpreted in the context of solubility and supersaturation. Furthermore, the less-explored applications of RESS in preparation of solid-lipid nanoparticles, liposome, polymorphic conversion, cocrystallization and inclusion complexation are compared with traditional processes. The solubility enhancement of API in SC CO₂ using co-solvent and its applications in particle generation are explored in published literature. The development and modifications in the conventional RESS process to overcome the limitations of RESS are presented. Finally, the perspective on RESS with special attention to its commercial operation is highlighted.

Supercritical fluid (SCF)-assisted fabrication of carrier-free drugs: An eco-friendly welcome to active pharmaceutical ingredients (APIs)

Despite the success in developing various pharmaceutical formulations, most of the active pharmaceutical ingredients (APIs)/drugs, according to the Biopharmaceutics Classification System (BCS), often suffer from various intrinsic limitations of solubility and permeability, substantially hindering their bioavailability in vivo. Regardless of the fact that the availability of different particle fabrication approaches (top-down and bottom-up) towards pharmaceutical manufacturing, the supercritical fluid (SCF) technology has emerged as one of the highly effective substitutes due to the environmentally benign nature and processing convenience, as well as the economically promising character of SCFs. The exceptional features of SCFs have endowed the fabrication of various APIs either solely or in combination with the compatible supramolecular species towards achieving improved drug delivery. Operating such APIs in high-pressure conditions often results in arbitrary-sized particulate forms, ranging from micron-sized to sub-micron/nano-sized particles. Comparatively, these SCF-processed particles offer enhanced tailorable physicochemical and morphological properties (size, shape, and surface), as well as improved performance efficacy (bioavailability and therapy) over the unprocessed APIs. Although the "carrier-based" delivery is practical among diverse delivery systems, the direct fabrication of APIs into suitable particulate forms, referred to as "carrier-free" delivery, has increased attention towards improving the bioavailability and conveying a high payload of the APIs. This review gives a comprehensive emphasis on the SCF-assisted fabrication of diverse APIs towards exploring their great potential in drug delivery. Initially, we discuss various challenges of drug delivery and particle fabrication approaches. Further, different supercritical carbon dioxide (SC-CO₂)-based fabrication approaches depending on the character of SCFs are explicitly described, highlighting their advantages and suitability in processing diverse APIs. Then, we provide detailed insights on various processing factors affecting the properties and morphology of SCF-processed APIs and their pharmaceutical applications, emphasizing their performance efficacy when administered through multiple routes of administration. Finally, we summarize this compilation with exciting perspectives based on the lessons learned so far and moving forward in terms of challenges and opportunities in the scale-up and clinical translation of these drugs using this innovative technology.

Supercritical Carbon Dioxide as a Green Alternative to Achieve Drug Complexation with Cyclodextrins

Cyclodextrins are widely used in pharmaceutics to enhance the bioavailability of many drugs. Conventional drug/cyclodextrin complexation techniques suffer from many drawbacks, such as a high residual content of toxic solvents in the formulations, the degradation of heat labile drugs and the difficulty in controlling the size and morphology of the product particles. These can be overcome by supercritical fluid technology thanks to the outstanding properties of supercritical CO₂ (scCO₂) such as its mild critical point, its tunable solvent power, and the absence of solvent residue after depressurization. In this work the use of scCO₂ as an unconventional medium to achieve the complexation with native and substituted cyclodextrins of over 50 drugs, which belong to different classes, are reviewed. This can be achieved with different approaches such as the “supercritical solvent impregnation” and “particle-formation” techniques. The different techniques are discussed to point out how they affect the complexation mechanism and efficiency, the physical state of the drug as well as the particle size distribution and morphology, which finally condition the release kinetics and drug bioavailability. When applicable, the results obtained for the same drug with various cyclodextrins, or different complexation techniques are compared with those obtained with conventional approaches.

HP-β-CD for the formulation of IgG and Ig-based biotherapeutics

The main challenge to develop HCF for IgG and Ig-based therapeutics is to achieve essential solubility, viscosity and stability of these molecules in order to maintain product quality and meet regulatory requirement during manufacturing, production, storage, shipment and administration processes. The commonly used and FDA approved excipients for IgG and Ig -based therapeutics may no longer fulfil the challenge of HCF development for these molecules to certain extent, especially for some complex Ig-based platforms. 2-Hydroxypropyl beta-cyclodextrin (HP-β-CD) is one of the promising excipients applied recently for HCF development of IgG and Ig-based therapeutics although it has been used for formulation of small synthesized chemical drugs for more than thirty years. This review describes essential aspects about application of HP-β-CD as excipient in pharmaceutical formulation, including physico-chemical properties of HP-β-CD, supply chain, regulatory, patent landscape, marketed drugs with HP-β-CD, analytics and analytical challenges, stability and control strategies, and safety concerns. It also provides an overview of different studies, and outcomes thereof, regarding formulation development for IgGs and Ig-based molecules in liquid and solid (lyophilized) dosage forms with HP-β-CD. The review specifically highlights the challenges for formulation manufacturing of IgG and Ig-based therapeutics with HP-β-CD and identifies areas for future work in pharmaceutical and formulation development.

Be Aggressive! Amorphous Excipients Enabling Single-Step Freeze-Drying of Monoclonal Antibody Formulations

Short freeze-drying cycles for biopharmaceuticals are desirable. Formulations containing an amorphous disaccharide, such as sucrose, are prone to collapse upon aggressive primary drying at higher shelf temperature. We used 2-hydroxypropyl-betacyclodextrin (HPBCD) in combination with sucrose and polyvinylpyrrolidone (PVP) to develop an aggressive lyophilization cycle for low concentration monoclonal antibody (mAb) formulations. Glass transition temperature and collapse temperature of the formulations were determined, and increasingly aggressive cycle parameters were applied. Using a shelf temperature of +30 °C during primary drying, the concept of combining sublimation and desorption of water in a single drying step was investigated. Cake appearance was evaluated visually and by micro-computed tomography. Lyophilisates were further analyzed for reconstitution time, specific surface area, residual moisture, and glass transition temperature. We demonstrated the applicability of single-step freeze-drying, shortening the total cycle time by 50% and providing elegant lyophilisates for pure HPBCD and HPBCD/sucrose formulations. HPBCD/PVP/sucrose showed minor dents, while good mAb stability at 10 mg/mL was obtained for HPBCD/sucrose and HPBCD/PVP/sucrose when stored at 40 °C for 3 months. We conclude that HPBCD-based formulations in combination with sucrose are highly attractive, enabling aggressive, single-step freeze-drying of low concentration mAb formulations, while maintaining elegant lyophilisates and ensuring protein stability at the same time.

Fluorescence-based techniques to assess the miscibility and physical stability of a drug–lipid complex

The objective of this study was to evaluate the feasibility of using fluorescence-based techniques to assess the miscibility and physical stability of a drug–lipid complex pharmaceutical dosage form under a solvent-free condition. An indomethacin–phospholipid complex (IDM–DPC) was used as model complex for this study. The miscibility of indomethacin within the phospholipid was assessed by fluorescence spectroscopy, fluorescence microscopy, and infrared spectroscopy. The miscibility limit of the complex system was determined by fluorescence to be 20%–30% drug loading content, showing good correlation with infrared spectroscopy. The physical stability of the IDM–DPC stored at 40 °C was evaluated by fluorescence microscopy. Indomethacin formulated in the lipid complex with an indomethacin loading not more than 30% remained in an amorphous state within a period of 21 days, whereas the samples with a drug loading over 30% started to crystallize earlier with increasing drug content. IDM–DPC having higher miscibilities were found to be more resistant to recrystallization under heating, thus having better physical stability. Fluorescence-based techniques showed convenience and promise in characterizing drug–lipid miscibility and predicting storage stability under a solvent-free condition.

Thermoreversible mucoadhesive polymer-drug dispersion for sustained local delivery of budesonide to treat inflammatory disorders of the GI tract

Mucoadhesive drug formulations have been studied and used as alternatives to conventional formulations in order to achieve prolonged retention at the intended site. In addition to providing a controlled drug release, several drugs and disease conditions might benefit from mucoadhesive formulations, contributing to better therapeutic outcomes. Here, we describe the development and the in vitro/in vivo characterization of a mucoadhesive in situ gellifying formulation using PF127, a thermo reversible polymer, entrapping budesonide (BUD), a potent corticosteroid used for the treatment of a wide range of inflammatory diseases, including those affecting mucosas, such as in the GI tract. PF127 formulations (15-17%) were successfully prepared by a cold method as a thermo reversible in situ gelling dispersion for mucosal drug delivery, as confirmed by DSC. Sol-gel temperatures of PF127 formulations (25-39 °C) were observed by dynamic gelation and determined by microrheology and oscillatory rheometry. X-ray diffractograms and TEM images showed that BUD was completely solubilized within the polymeric micelles. In vitro, the gels showed 5-14 g force of mucoadhesion, and the ex vivo studies confirmed that the formulation efficiently adhered to the mucosa. Histopathological analysis combined with fluorescence images and ex vivo intestinal permeation confirmed that the formulation remained on the TGI mucosa for at least 4 h after administration. In vivo studies conducted in a murine model of intestinal mucositis demonstrated that the 16% PF127 BUD formulation was able to resolve the inflammatory injury in the intestinal mucosa. Results demonstrate that fine-tuning of PF127 formulations along with adequate selection of the drug agent, thorough characterization of the dispersions and their interactions with biological interfaces leads to the development of effective controlled drug delivery systems targeted to GI inflammatory diseases.

Preparation and Characterization of an Oral Norethindrone Sustained Release/Controlled Release Nanoparticles Formulation Based on Chitosan

Norethindrone has short half-life and low bioavailability. The objective was to prepare an oral Sustained Release/Controlled Release (SR/CR) Liquid Medicated Formulation (LMF) to enhance bioavailability and improve patient compliance. Norethindrone was solubilized in HP-β-CD then complexed with different concentrations of Low Molecular Weight Chitosan (LMWC) (mucoadhesive). PolyElectrolyte Complexes (PECs) were homogenized with oleic acid using different concentrations of tween 80 to form LMFs (nanoemulsions). PECs and LMFs were characterized using different techniques. LMF 2 (optimum formula containing 2.5% w/v LMWC 11 kDa) was administered orally to dogs and mice for pharmacokinetic and adhesion evaluation. DSC, FTIR spectroscopy and SEM images indicated complex formation. Mean diameters of PECs were 183-425 nm, mean zeta potentials were + 18.6-+ 31 mV, and complexation efficiencies were 18.0-20.6%. Ten to fifteen percent tween was needed to prepare homogenous LMFs. Mean diameter of LMF 2 was 10.5 ± 0.57 nm, mean zeta potential was - 11.07 ± - 0.49 mV, encapsulation efficiency was 95.28 ± 1.75%, and each mL contained 145.5 μg norethindrone. SEM images showed spherical homogeneous oil droplets. All of these parameters were affected by molecular weight and concentration of chitosan. Norethindrone release from LMFs was controlled (zero order) for 96 h. It was little affected by molecular weight and concentration of chitosan but affected by concentration of tween 80. LMF 2 adhered to GIT for 48 h and enhanced the bioavailability. It showed no cytotoxicity after considering dilution in GIT and was stable for 3 months refrigerated. In conclusion an effective SR/CR LMF was prepared.

3D Printed "Starmix" Drug Loaded Dosage Forms for Paediatric Applications

PURPOSE

Three- dimensional (3D) printing has received significant attention as a manufacturing process for pharmaceutical dosage forms. In this study, we used Fusion Deposition Modelling (FDM) in order to print "candy - like" formulations by imitating Starmix® sweets to prepare paediatric medicines with enhanced palatability.

METHODS

Hot melt extrusion processing (HME) was coupled with FDM to prepare extruded filaments of indomethacin (IND), hypromellose acetate succinate (HPMCAS) and polyethylene glycol (PEG) formulations and subsequently feed them in the 3D printer. The shapes of the Starmix® objects were printed in the form of a heart, ring, bottle, ring, bear and lion. Differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), Fourier Transform Infra-red Spectroscopy (FT-IR) and confocal Raman analysis were used to assess the drug - excipient interactions and the content uniformity.

RESULTS

Physicochemical analysis showed the presence of molecularly dispersed IND in the printed tablets. In vivo taste masking evaluation demonstrated excellent masking of the drug bitterness. The printed forms were evaluated for drug dissolution and showed immediate IND release independently of the printed shape, within 60 min.

CONCLUSIONS

3D printing was used successfully to process drug loaded filaments for the development of paediatric printed tablets in the form of Starmix® designs.

Supercritical Fluid Technology: An Emphasis on Drug Delivery and Related Biomedical Applications

During the past few decades, supercritical fluid (SCF) has emerged as an effective alternative for many traditional pharmaceutical manufacturing processes. Operating active pharmaceutical ingredients (APIs) alone or in combination with various biodegradable polymeric carriers in high-pressure conditions provides enhanced features with respect to their physical properties such as bioavailability enhancement, is of relevance to the application of SCF in the pharmaceutical industry. Herein, recent advances in drug delivery systems manufactured using the SCF technology are reviewed. We provide a brief description of the history, principle, and various preparation methods involved in the SCF technology. Next, we aim to give a brief overview, which provides an emphasis and discussion of recent reports using supercritical carbon dioxide (SC-CO2 ) for fabrication of polymeric carriers, for applications in areas related to drug delivery, tissue engineering, bio-imaging, and other biomedical applications. We finally summarize with perspectives.

Solid-state flurbiprofen and methyl-β-cyclodextrin inclusion complexes prepared using a single-step, organic solvent-free supercritical fluid process

The aim of this study was to enhance the apparent solubility and dissolution properties of flurbiprofen through inclusion complexation with cyclodextrins. Especially, the efficacy of supercritical fluid technology as a preparative technique for the preparation of flurbiprofen-methyl-β-cyclodextrin inclusion complexes was evaluated. The complexes were prepared by supercritical carbon dioxide processing and were evaluated by solubility, differential scanning calorimetry, X-ray powder diffraction, scanning electron microscopy, practical yield, drug content estimation and in vitro dissolution studies. Computational molecular docking studies were conducted to study the possibility of molecular arrangement of inclusion complexes between flurbiprofen and methyl-β-cyclodextrin. The studies support the formation of stable molecular inclusion complexes between the drug and cyclodextrin in a 1:1 stoichiometry. In vitro dissolution studies showed that the dissolution properties of flurbiprofen were significantly enhanced by the binary mixtures prepared by supercritical carbon dioxide processing. The amount of flurbiprofen dissolved into solution alone was very low with 1.11±0.09% dissolving at the end of 60min, while the binary mixtures processed by supercritical carbon dioxide at 45°C and 200bar released 99.39±2.34% of the drug at the end of 30min. All the binary mixtures processed by supercritical carbon dioxide at 45°C exhibited a drug release of more than 80% within the first 10min irrespective of the pressure employed. The study demonstrated the single step, organic solvent-free supercritical carbon dioxide process as a promising approach for the preparation of inclusion complexes between flurbiprofen and methyl-β-cyclodextrin in solid-state.

Effect of preparation processes and structural insight into the supermolecular system: Bisacodyl and β-cyclodextrin inclusion complex

In this study, β-cyclodextrin (β-CD) and bisacodyl were chosen as model host and guest molecule to explore the effect of preparation processes on the physicochemical properties of inclusion complexes (ICs) and to gain an insight into the structure of ICs. The influence of temperature and pH on complexation was studied by multiple temperature-pH phase solubility analysis. The most favorable conformation was predicted by molecular modeling using AutoDock. (1)H nuclear magnetic resonance and rotating frame nuclear Overhauser effect spectroscopy further confirmed the structure. Moreover, bisacodyl · β-CD ICs in solid state were successfully prepared via three different procedures (co-crystallization, co-evaporation, and co-grinding) and fully characterized by several solid-state techniques, namely, Fourier transform infrared spectroscopy, X-ray powder diffraction, thermogravimetric analysis, differential scanning calorimetry, solid-state NMR spectroscopy, and scanning electron microscopy. It was found that acid solution and low temperature were unfavorable for formation of bisacodyl · β-CD. The pyridine moiety was suggested to be enclosed in the hydrophobic cavity of β-CD. The complexes prepared using co-crystallization showed properties similar to those prepared using co-evaporation. Moreover, ICs obtained by co-evaporation and co-grinding had higher loading efficiency, water solubility, and dissolution rate than ICs obtained by co-crystallization.

Preparation and characterization of antioxidant nanoparticles composed of chitosan and fucoidan for antibiotics delivery

In this study, we developed novel chitosan/fucoidan nanoparticles (CS/F NPs) using a simple polyelectrolyte self-assembly method and evaluated their potential to be antioxidant carriers. As the CS/F weight ratio was 5/1, the CS/F NPs were spherical and exhibited diameters of approximately 230–250 nm, as demonstrated by TEM. These CS/F NPs maintained compactness and stability for 25 day in phosphate-buffered saline (pH 6.0–7.4). The CS/F NPs exhibited highly potent antioxidant effects by scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH), reducing the concentration of intracellular reactive oxygen species (ROS) and superoxide anion (O₂⁻) in stimulated macrophages. The DPPH scavenging effect of CS/F NPs primarily derives from fucoidan. Furthermore, these CS/F NPs activated no host immune cells into inflammation-mediated cytotoxic conditions induced by IL-6 production and NO generation. The MTT cell viability assay revealed an absence of toxicity in A549 cells after exposure to the formulations containing 0.375 mg NPs/mL to 3 mg NPs/mL. Gentamicin (GM), an antibiotic, was used as a model drug for an in vitro releasing test. The CS/F NPs controlled the release of GM for up to 72 h, with 99% of release. The antioxidant CS/F NPs prepared in this study could thus be effective in delivering antibiotics to the lungs, particularly for airway inflammatory diseases.

Polypeptide-based aerosol nanoparticles: self-assembly and control of conformation by solvent and thermal annealing

Nanoconfined self-assemblies within aerosol nanoparticles and control of the secondary structures are shown here upon ionically complexing poly(L-lysine) (PLL) with dodecylbenzenesulfonic acid (DBSA) surfactant and using solvents chloroform, 1-propanol, or dimethylformamide. Different solvent volatilities and drying temperatures allowed tuning the kinetics of morphology formation. The supramolecular self-assembly and morphology were studied using cryo-TEM and SEM, and the secondary structures, using FT-IR. Highly volatile chloroform led to the major fraction of α-helical conformation of PLL(DBSA), whereas less volatile solvents or higher drying temperatures led to the increasing fraction of β-sheets. Added drugs budesonide and ketoprofen prevented β-sheet formation and studied PLL(DBSA)-drug nanoparticles were in the α-helical conformation. Preliminary studies showed that ketoprofen released with a slower rate than budesonide which was hypothesized to result from different localization of drugs within the PLL(DBSA) nanoparticles. These results instruct to prepare polypeptide aerosol nanoparticles with internal self-assembled structures and to control the secondary structures by aerosol solvent annealing, which we foresee to be useful, e.g., toward controlling the release of poorly soluble drug molecules.

Fast-acting clotrimazole composited PVP/HPβCD nanofibers for oral candidiasis application

PURPOSE

This study investigates fabrication of clotrimazole (CZ)-composited electrospun Polyvinylpyrrolidone/Hydroxypropyl-β-cyclodextrin (PVP/HPβCD) blended nanofiber mats for oral candidiasis applications.

METHODS

PVP/HPβCD blended nanofiber mats containing clotrimazole were electrospun and characterized using SEM, DSC and XRPD. The solvent system ethanol: water: benzyl alcohol (EtOH:H2O:BzOH) with a 70:20:10 ratio was optimal for the electrospinning process. Various amounts of CZ were loaded into the nanofiber mats. The nanofiber mats was further investigated for drug release, antifungal activity and cytotoxicity.

RESULTS

The fiber diameters in the mats were in the nanometer range. The DSC and XRPD revealed a molecular dispersion of amorphous CZ in the nanofiber mats. The loading capacity increased when CZ content was raised. A fast dissolved and released of CZ from the nanofibers mat was achieved. The ability of the CZ-loaded nanofiber mats to kill the Candida depended on the amount of CZ in the mats; moreover, the CZ-loaded nanofibers killed the Candida significantly faster than the CZ powder and lozenges with low cytotoxicity.

CONCLUSIONS

CZ-loaded nanofiber mats were successfully electrospun. They exhibited rapid antifungal activity in vitro relative to CZ powder and lozenges. Further in vivo studies are needed to investigate for their application in oral candidiasis.

In vivo brain microdialysis as a formulation-screening tool for a poorly soluble centrally acting drug

OBJECTIVE

Efficacy of a formulation of a poorly soluble centrally acting drug was evaluated by measuring dopamine responses using in vivo brain microdialysis.

METHODS

Co-crystals (1:1) of carbamazepine and nicotinamide (CBZ-NCT) were complexed with cyclodextrins (γ-CDs) using supercritical fluid processing. Phase solubility and intrinsic dissolution were studied. Pharmacodynamic studies were performed on rats divided into three groups getting either CBZ-NCT in CD (20 mg/kg CBZ), pure CBZ solution or vehicle. A guide cannula was implanted to attach the microdialysis probe. Dialysate samples were analyzed for dopamine levels, which were compared between groups.

RESULTS

The optimized CBZ formulation (5% w/w in γ-CD) with solubility - 10 mg/mL showed stepwise increase in dopamine response (maximum 250% of baseline) compared to neat CBZ or vehicle (p < 0.05). The pharmacokinetics of the drug required 30 min to elicit CNS response, which peaked at about 1.5-2 h.

CONCLUSION

Hence, brain microdialysis was successfully used to evaluate a dissolution rate enhancing formulation.

Characterization of Ketoprofen/Methyl-β-Cyclodextrin Complexes Prepared Using Supercritical Carbon Dioxide

Complexes of methyl-β-cyclodextrin and ketoprofen, a crystalline anti-inflammatory drug with poor water solubility, have been prepared for the first time in the presence of supercritical CO2at 40°C and 20 MPa. The supercritical treatment allows these pharmaceutical formulations to be prepared without the use of any auxiliary agents or organic solvents. The treated samples were characterized through differential scanning calorimetry, X-ray diffractometry, and the Fourier transform infrared spectroscopy to exclude the presence of crystalline drug and check the formation of the complexes. The increase of the drug dissolution rate was investigated performing in vitro release tests in aqueous solutions. The results showed that the supercritical treatment can be an efficient method to obtain inclusion complexes with enhanced release kinetics. The operating methods of the release tests, that is, the “tablet method” or the “dispersed amount method,” affected both the dissolution rate and its dependence on the drug amount in the samples. On the contrary, the variation of the pH of the dissolution medium did not show any effect on the release rate of the supercritical complexes.

Factorial design analysis and optimisation of alginate-Ca-chitosan microspheres

The purpose of this study was to apply factorial design in order to determine the influence of the formulation factors and their interactions on several responses such as particle size, dissolution behaviour at pH 1.2 and pH 7.4 as well as production yield, during the development of budesonide loaded, chitosan coated Ca-alginate microparticles (MPs) intended for treatment of inflammatory diseases in the gastrointestinal tract. Produced drug-loaded MPs were spherical in shape, had smooth surfaces with low porosity and size range between 5 and 11 µm. Production yield for the formulations from the design varied from 19% to 50%. Optimisation was performed using central composite design setting the targets: particle size at 5.5 µm, maximised yield, suppressed dissolution at pH 1.2 and sustained release at pH 7.4. The optimised batches were identified with a combined desirability value of 0.967.

Supercritical fluid-mediated methods to encapsulate drugs: recent advances and new opportunities

With the advent of the development of novel pharmaceutical products and therapies, there is a need for effective delivery of these products to patients. Dependent on whether they are small-molecular weight drugs or biologics, many new compounds may suffer from poor solubility, poor stability or require frequent administration and therefore require optimized delivery. For example, the utilization of polymorphism and the enhanced solubility in the amorphous state is being exploited to improve the dissolution of small-molecular weight poorly soluble drugs. This can be achieved by the formation of solid dispersions in water-soluble matrices. In addition, encapsulation in biodegradable polymeric materials is one potential route to reduce the frequency of administration through the formation of sustained-release formulations. This is desirable for biologics, for example, which generally require administration once or twice daily. Supercritical fluid processing can achieve both of these outcomes, and this review focuses on the use of supercritical CO2 to encapsulate active pharmaceutical ingredients to enhance solubility or achieve sustained release. Using supercritical CO2-mediated processes provides a clean and potentially solvent-free route to prepare novel drug products and is therefore an attractive alternative to conventional manufacturing technologies.