Thermostabilisation of an agonist-bound conformation of the human adenosine A(2A) receptor

Investigation of F508del CFTR unfolding and a search for stabilizing small molecules

Mutation of phenylalanine at position 508 in the cystic fibrosis transmembrane conductance regulator (F508del CFTR) yields a protein unstable at physiological temperatures that is rapidly degraded in the cell. This mutation is present in about 90% of cystic fibrosis patients, hence there is great interest in compounds reversing its instability. We have previously reported the expression of the mutated protein at low temperature and its purification in detergent. Here we describe the use of the protein to screen compounds present in a library of Federal Drug Administration (FDA) - approved drugs and also in a small natural product library. The kinetics of unfolding of F508del CFTR at 37 °C were probed by the increase in solvent-exposed cysteine residues accessible to a fluorescent reporter molecule. This occurred in a bi-exponential manner with a major (≈60%) component of half-life around 5 min and a minor component of around 60 min. The faster kinetics match those observed for loss of channel activity of F508del CFTR in cells at 37 °C. Most compounds tested had no effect on the fluorescence increase, but some were identified that significantly slowed the kinetics. The general properties of these compounds, and any likely mechanisms for inducing stability in purified CFTR are discussed. These experimental data may be useful for artificial intelligence - aided design of CFTR-specific drugs and in the identification of stabilizing additives for membrane proteins (in general).

Engineering G protein-coupled receptors for stabilization

G protein-coupled receptors (GPCRs) are one of the most important families of targets for drug discovery. One of the limiting steps in the study of GPCRs has been their stability, with significant and time-consuming protein engineering often used to stabilize GPCRs for structural characterization and drug screening. Unfortunately, computational methods developed using globular soluble proteins have translated poorly to the rational engineering of GPCRs. To fill this gap, we propose GPCR-tm, a novel and personalized structurally driven web-based machine learning tool to study the impacts of mutations on GPCR stability. We show that GPCR-tm performs as well as or better than alternative methods, and that it can accurately rank the stability changes of a wide range of mutations occurring in various types of class A GPCRs. GPCR-tm achieved Pearson's correlation coefficients of 0.74 and 0.46 on 10-fold cross-validation and blind test sets, respectively. We observed that the (structural) graph-based signatures were the most important set of features for predicting destabilizing mutations, which points out that these signatures properly describe the changes in the environment where the mutations occur. More specifically, GPCR-tm was able to accurately rank mutations based on their effect on protein stability, guiding their rational stabilization. GPCR-tm is available through a user-friendly web server at https://biosig.lab.uq.edu.au/gpcr_tm/.

Recovery of the histamine H3 receptor activity lost in yeast cells through error-prone PCR and in vivo selection

G protein-coupled receptors (GPCRs) are the largest protein family in humans and are important drug targets. Yeast, especially Saccharomyces cerevisiae, is a useful host for modifying the function and stability of GPCRs through protein engineering, which is advantageous for mammalian cells. When GPCRs are expressed in yeast, their function is often impaired. In this study, we performed random mutagenesis using error-prone PCR and then an in vivo screening to obtain mutants that recovered the activity of the human histamine H3 receptor (H3R), which loses its signaling function when expressed in yeast. Four mutations with recovered activity were identified after screening. Three of the mutations were identified near the DRY and NPxxY motifs of H3R, which are important for activation and are commonly found in class A GPCRs. The mutants responded exclusively to the yeast YB1 strain harboring Gi-chimera proteins, showing retention of G protein specificity. Analysis of one of the mutants with recovered activity, C415R, revealed that it maintained its ligand-binding characteristics. The strategy used in this study may enable the recovery of the activity of other GPCRs that do not function in S. cerevisiae and may be useful in creating GPCRs mutants stabilized in their active conformations.

Nucleoside transporters and immunosuppressive adenosine signaling in the tumor microenvironment: Potential therapeutic opportunities

Adenosine compartmentalization has a profound impact on immune cell function by regulating adenosine localization and, therefore, extracellular signaling capabilities, which suppresses immune cell function in the tumor microenvironment. Nucleoside transporters, responsible for the translocation and cellular compartmentalization of hydrophilic adenosine, represent an understudied yet crucial component of adenosine disposition in the tumor microenvironment. In this review article, we will summarize what is known regarding nucleoside transporter's function within the purinome in relation to currently devised points of intervention (i.e., ectonucleotidases, adenosine receptors) for cancer immunotherapy, alterations in nucleoside transporter expression reported in cancer, and potential avenues for targeting of nucleoside transporters for the desired modulation of adenosine compartmentalization and action. Further, we put forward that nucleoside transporters are an unexplored therapeutic opportunity, and modulation of nucleoside transport processes could attenuate the pathogenic buildup of immunosuppressive adenosine in solid tumors, particularly those enriched with nucleoside transport proteins.

Yeast-based directed-evolution for high-throughput structural stabilization of G protein-coupled receptors (GPCRs)

The immense potential of G protein-coupled receptors (GPCRs) as targets for drug discovery is not fully realized due to the enormous difficulties associated with structure elucidation of these profoundly unstable membrane proteins. The existing methods of GPCR stability-engineering are cumbersome and low-throughput; in addition, the scope of GPCRs that could benefit from these techniques is limited. Here, we present a yeast-based screening platform for a single-step isolation of GRCR variants stable in the presence of short-chain detergents, a feature essential for their successful crystallization using vapor diffusion method. The yeast detergent-resistant cell wall presents a unique opportunity for compartmentalization, to physically link the receptor's phenotype to its encoding DNA, and thus enable discovery of stable GPCR variants with unprecedent efficiency. The scope of mutations identified by the method reveals a surprising amenability of the GPCR scaffold to stabilization, and suggests an intriguing possibility of amending the stability properties of GPCR by varying the structural status of the C-terminus.

[Recent advances in the structural biology of the class C G protein-coupled receptors: The metabotropic Glutamate receptor 5]

Class C GPCRs, that include metabotropic glutamate receptors (mGlu), taste receptors, GABA_B receptor and Calcium-sensing receptor, are unusual in terms of their molecular architecture and allosteric regulation. They all form obligatory dimers, dimerization being fundamental for their function. More specifically, the mGlu are activated by the main excitatory neurotransmitter, L-glutamate. mGlu activation by glutamate binding in the venus flytrap domain (VFT) triggers conformational changes that are transmitted, through the Cystein-Rich Domain (CRD), to the conserved fold of 7 transmembrane helices (7TM), that couples to intracellular G protein. mGlu activity can also be allosterically modulated by positive (PAM) or negative (NAM) allosteric modulators binding to the 7TM. Recent progress in cryo-electron microscopy (cryoEM) has allowed unprecedented advances in deciphering the structural and molecular basis of their activation mechanism. The agonist induces a large movement between the subunits, bringing the 7TMs together and stabilizing a 7TM conformation structurally similar to the inactive state. The diversity of inactive conformations for the class C was unexpected but allows PAM stabilising a 7TM active conformation independent of the conformational changes induced by agonists, representing an alternative mode of mGlu activation. Here we present and discuss recent structural characterisation of mGlu receptors, highlighting findings that make the class C of GPCR unique. Understanding the structural basis of mGlu dimer signaling represents a landmark achievement and paves the way for structural investigation of GPCR dimer signaling in general. Structural information will open new avenues for structure-based drug design.

Universal platform for the generation of thermostabilized GPCRs that crystallize in LCP

Structural studies of G-protein-coupled receptors (GPCRs) are often limited by difficulties in obtaining well-diffracting crystals suitable for high-resolution structure determination. During the past decade, crystallization in lipidic cubic phase (LCP) has become the most successful and widely used technique for obtaining such crystals. Despite often intense efforts, many GPCRs remain refractory to crystallization, even if receptors can be purified in sufficient amounts. To address this issue, we have developed a highly efficient screening and stabilization strategy for GPCRs, based on a fluorescence thermal stability assay readout, which seems to correlate particularly well with those GPCR constructs that remain native during incorporation into the LCP. Detailed protocols are provided for rapid and cost-efficient mutant and construct generation using sequence- and ligation-independent cloning, high-throughput magnetic bead-based protein purification from small-scale expressions in mammalian cells, the screening and optimal combination of mutations for increased receptor thermostability and the rapid identification of suitable chimeric fusion protein constructs for successful crystallization in LCP. We exemplify the method on three receptors from two different classes: the neurokinin 1 receptor, the oxytocin receptor and the parathyroid hormone 1 receptor.

Annealing synchronizes the 70S ribosome into a minimum-energy conformation

Researchers commonly anneal metals, alloys, and semiconductors to repair defects and improve microstructures via recrystallization. Theoretical studies indicate that simulated annealing on biological macromolecules helps predict the final structures with minimum free energy. Experimental validation of this homogenizing effect and further exploration of its applications are fascinating scientific questions that remain elusive. Here, we chose the apo-state 70S ribosome from Escherichia coli as a model, wherein the 30S subunit undergoes a thermally driven intersubunit rotation and exhibits substantial structural flexibility as well as distinct free energy. We experimentally demonstrate that annealing at a fast cooling rate enhances the 70S ribosome homogeneity and improves local resolution on the 30S subunit. After annealing, the 70S ribosome is in a nonrotated state with respect to corresponding intermediate structures in unannealed or heated ribosomes. Manifold-based analysis further indicates that the annealed 70S ribosome takes a narrow conformational distribution and exhibits a minimum-energy state in the free-energy landscape. Our experimental results offer a facile yet robust approach to enhance protein stability, which is ideal for high-resolution cryogenic electron microscopy. Beyond structure determination, annealing shows great potential for synchronizing proteins on a single-molecule level and can be extended to study protein folding and explore conformational and energy landscapes.

Targeting GPCRs and Their Signaling as a Therapeutic Option in Melanoma

Simple Summary

Sixteen G-protein-coupled receptors (GPCRs) have been involved in melanogenesis or melanomagenesis. Here, we review these GPCRs, their associated signaling, and therapies.

Abstract

G-protein-coupled receptors (GPCRs) serve prominent roles in melanocyte lineage physiology, with an impact at all stages of development, as well as on mature melanocyte functions. GPCR ligands are present in the skin and regulate melanocyte homeostasis, including pigmentation. The role of GPCRs in the regulation of pigmentation and, consequently, protection against external aggression, such as ultraviolet radiation, has long been established. However, evidence of new functions of GPCRs directly in melanomagenesis has been highlighted in recent years. GPCRs are coupled, through their intracellular domains, to heterotrimeric G-proteins, which induce cellular signaling through various pathways. Such signaling modulates numerous essential cellular processes that occur during melanomagenesis, including proliferation and migration. GPCR-associated signaling in melanoma can be activated by the binding of paracrine factors to their receptors or directly by activating mutations. In this review, we present melanoma-associated alterations of GPCRs and their downstream signaling and discuss the various preclinical models used to evaluate new therapeutic approaches against GPCR activity in melanoma. Recent striking advances in our understanding of the structure, function, and regulation of GPCRs will undoubtedly broaden melanoma treatment options in the future.

Deciphering conformational selectivity in the A2A adenosine G protein-coupled receptor by free energy simulations

Transmembranal G Protein-Coupled Receptors (GPCRs) transduce extracellular chemical signals to the cell, via conformational change from a resting (inactive) to an active (canonically bound to a G-protein) conformation. Receptor activation is normally modulated by extracellular ligand binding, but mutations in the receptor can also shift this equilibrium by stabilizing different conformational states. In this work, we built structure-energetic relationships of receptor activation based on original thermodynamic cycles that represent the conformational equilibrium of the prototypical A_2A adenosine receptor (AR). These cycles were solved with efficient free energy perturbation (FEP) protocols, allowing to distinguish the pharmacological profile of different series of A_2AAR agonists with different efficacies. The modulatory effects of point mutations on the basal activity of the receptor or on ligand efficacies could also be detected. This methodology can guide GPCR ligand design with tailored pharmacological properties, or allow the identification of mutations that modulate receptor activation with potential clinical implications.

The design of new ligands as chemical modulators of G protein-coupled receptors (GPCRs) has benefited considerably during the last years of advances in both the structural and computational biology disciplines. Within the last area, the use of free energy calculation methods has arisen as a computational tool to predict ligand affinities to explain structure-affinity relationships and guide lead optimization campaigns. However, our comprehension of the structural determinants of ligands with different pharmacological profile is scarce, and knowledge of the chemical modifications associated with an agonistic or antagonistic profile would be extremely valuable. We herein report an original implementation of the thermodynamic cycles associated with free energy perturbation (FEP) simulations, to mimic the conformational equilibrium between active and inactive GPCRs, and establish a framework to describe pharmacological profiles as a function of the ligands selectivity for a given receptor conformation. The advantage of this method resides into its simplicity of use, and the only consideration of active and inactive conformations of the receptor, with no simulation of the transitions between them. This model can accurately predict the pharmacological profile of series of full and partial agonists as opposed to antagonists of the A_2A adenosine receptor, and moreover, how certain mutations associated with modulation of basal activity can influence this pharmacological profiles, which enables our understanding of such clinically relevant mutations.

Characterization of binding kinetics of A2AR to Gαs protein by surface plasmon resonance

Because of their surface localization, G protein-coupled receptors (GPCRs) are often pharmaceutical targets as they respond to a variety of extracellular stimuli (e.g., light, hormones, small molecules) that may activate or inhibit a downstream signaling response. The adenosine A_2A receptor (A_2AR) is a well-characterized GPCR that is expressed widely throughout the human body, with over 10 crystal structures determined. Truncation of the A_2AR C-terminus is necessary for crystallization as this portion of the receptor is long and unstructured; however, previous work suggests shortening of the A_2AR C-terminus from 412 to 316 amino acids (A_2AΔ316R) ablates downstream signaling, as measured by cAMP production, to below that of constitutive full-length A_2AR levels. As cAMP production is downstream of the first activation event-coupling of G protein to its receptor-investigating that first step in activation is important in understanding how the truncation effects native GPCR function. Here, using purified receptor and Gα_s proteins, we characterize the association of A_2AR and A_2AΔ316R to Gα_s with and without GDP or GTPγs using surface plasmon resonance (SPR). Gα_s affinity for A_2AR was greatest for apo-Gα_s, moderately affected in the presence of GDP and nearly completely ablated by the addition of GTPγs. Truncation of the A_2AR C-terminus (A_2AΔ316R) decreased the affinity of the unliganded receptor for Gα_s by ∼20%, suggesting small changes to binding can greatly impact downstream signaling.

The rapid "teabag" method for high-end purification of membrane proteins

Overproduction and purification of membrane proteins are generally challenging and time-consuming procedures due to low expression levels, misfolding, and low stability once extracted from the membrane. Reducing processing steps and shortening the timespan for purification represent attractive approaches to overcome some of these challenges. We have therefore compared a fast “teabag” purification method with conventional purification for five different membrane proteins (MraY, AQP10, ClC-1, PAR2 and KCC2). Notably, this new approach reduces the purification time significantly, and the quality of the purified membrane proteins is equal to or exceeds conventional methods as assessed by size exclusion chromatography, SDS-PAGE and downstream applications such as ITC, crystallization and cryo-EM. Furthermore, the method is scalable, applicable to a range of affinity resins and allows for parallelization. Consequently, the technique has the potential to substantially simplify purification efforts of membrane proteins in basic and applied sciences.

An investigation into the allosteric mechanism of GPCR A2A adenosine receptor with trajectory-based information theory and complex network model

G protein-coupled receptors (GPCRs), a large superfamily of transmembrane (TM) proteins, allosterically transduce the signal of ligand binding in the extracellular (EC) domain to couple to effector proteins in the intracellular (IC) domain, therefore forming the largest class of drug targets. The A_2A adenosine receptor (A_2AAR), a class-A GPCR, has been extensively studied as it offers numerous possibilities for therapeutic applications. However, the mechanism of allosteric communication between EC and IC domains is not completely clear. In this work, we utilize torsional mutual information to quantify the correlated motions of residue pairs from its molecular dynamics (MD) simulation trajectories, and further use the complex network model to obtain allosteric pipelines and hubs. The identified allosteric communication pipelines mainly transmit the signal from EC domain to the cytoplasmic ends of TM helix 5 (TM5), TM6 and TM7. The allosteric hubs, mostly located at TM5, TM6 and TM7, play an important role in mediating allosteric signal transmission to keep the receptor rigid and prevent G protein from binding to IC domain, which can explain the reason why their mutations distant from ligand-binding site do not affect the ligand binding affinity but affect the ligand efficacy. Additionally, we identify the key residues located in antagonist ZM241385 binding pocket which mediate multiple allosteric pathways and have been experimentally proven to play a critical role in affecting the ligand potency. This study is helpful for understanding the allosteric communication mechanism of A_2AAR, and can provide valuable information for the structure-based drug design of GPCRs.Communicated by Ramaswamy H. Sarma.

Strategic Screening and Characterization of the Visual GPCR-mini-G Protein Signaling Complex for Successful Crystallization

The key to determining crystal structures of membrane protein complexes is the quality of the sample prior to crystallization. In particular, the choice of detergent is critical, because it affects both the stability and monodispersity of the complex. We recently determined the crystal structure of an active state of bovine rhodopsin coupled to an engineered G protein, mini-G_o, at 3.1 Å resolution. Here, we detail the procedure for optimizing the preparation of the rhodopsin–mini-G_o complex. Dark-state rhodopsin was prepared in classical and neopentyl glycol (NPG) detergents, followed by complex formation with mini-G_o under light exposure. The stability of the rhodopsin was assessed by ultraviolet-visible (UV-VIS) spectroscopy, which monitors the reconstitution into rhodopsin of the light-sensitive ligand, 9-cis retinal. Automated size-exclusion chromatography (SEC) was used to characterize the monodispersity of rhodopsin and the rhodopsin–mini-G_o complex. SDS-polyacrylamide electrophoresis (SDS-PAGE) confirmed the formation of the complex by identifying a 1:1 molar ratio between rhodopsin and mini-G_o after staining the gel with Coomassie blue. After cross-validating all this analytical data, we eliminated unsuitable detergents and continued with the best candidate detergent for large-scale preparation and crystallization. An additional problem arose from the heterogeneity of N-glycosylation. Heterologously-expressed rhodopsin was observed on SDS-PAGE to have two different N-glycosylated populations, which would probably have hindered crystallogenesis. Therefore, different deglycosylation enzymes were tested, and endoglycosidase F1 (EndoF1) produced rhodopsin with a single species of N-glycosylation. With this strategic pipeline for characterizing protein quality, preparation of the rhodopsin–mini-G_o complex was optimized to deliver the crystal structure. This was only the third crystal structure of a GPCR–G protein signaling complex. This approach can also be generalized for other membrane proteins and their complexes to facilitate sample preparation and structure determination.

Backbone and methyl assignment of bacteriorhodopsin incorporated into nanodiscs

Resonance assignments are challenging for membrane proteins due to the size of the lipid/detergent-protein complex and the presence of line-broadening from conformational exchange. As a consequence, many correlations are missing in the triple-resonance NMR experiments typically used for assignments. Herein, we present an approach in which correlations from these solution-state NMR experiments are supplemented by data from ¹³C unlabeling, single-amino acid type labeling, 4D NOESY data and proximity of moieties to lipids or water in combination with a structure of the protein. These additional data are used to edit the expected peaklists for the automated assignment protocol FLYA, a module of the program package CYANA. We demonstrate application of the protocol to the 262-residue proton pump from archaeal bacteriorhodopsin (bR) in lipid nanodiscs. The lipid-protein assembly is characterized by an overall correlation time of 44 ns. The protocol yielded assignments for 62% of all backbone (H, N, C^α, C^β, C') resonances of bR, corresponding to 74% of all observed backbone spin systems, and 60% of the Ala, Met, Ile (δ1), Leu and Val methyl groups, thus enabling to assign a large fraction of the protein without mutagenesis data. Most missing resonances stem from the extracellular half, likely due intermediate exchange line-broadening. Further analysis revealed that missing information of the amino acid type of the preceding residue is the largest problem, and that 4D NOESY experiments are particularly helpful to compensate for that information loss.

Machine Learning for Prioritization of Thermostabilizing Mutations for G-Protein Coupled Receptors

Although the three-dimensional structures of G-protein coupled receptors (GPCRs), the largest superfamily of drug targets, have enabled structure-based drug design, there are no structures available for 87% of GPCRs. This is due to the stiff challenge in purifying the inherently flexible GPCRs. Identifying thermostabilized mutant GPCRs via systematic alanine scanning mutations has been a successful strategy in stabilizing GPCRs, but it remains a daunting task for each GPCR. We developed a computational method that combines sequence-, structure-, and dynamics-based molecular properties of GPCRs that recapitulate GPCR stability, with four different machine learning methods to predict thermostable mutations ahead of experiments. This method has been trained on thermostability data for 1231 mutants, the largest publicly available data set. A blind prediction for thermostable mutations of the complement factor C5a receptor 1 retrieved 36% of the thermostable mutants in the top 50 prioritized mutants compared to 3% in the first 50 attempts using systematic alanine scanning.

Amino-3,5-Dicyanopyridines Targeting the Adenosine Receptors Ranging from Pan Ligands to Combined A1/A2B Partial Agonists

The amino-3,5-dicyanopyridine derivatives belong to an intriguing series of adenosine receptor (AR) ligands that has been developed by both academic researchers and industry. Indeed, the studies carried out to date underline the versatility of the dicyanopyridine scaffold to obtain AR ligands with not only a wide range of affinities but also with diverse degrees of efficacies at the different ARs. These observations prompted us to investigate on the structure-activity relationships (SARs) of this series leading to important previously reported results. The present SAR study has helped to confirm the 1H-imidazol-2-yl group at R² position as an important feature for producing potent AR agonists. Moreover, the nature of the R¹ substituent highly affects not only affinity/activity at the hA₁ and hA_2B ARs but also selectivity versus the other subtypes. Potent hA₁ and hA_2B AR ligands were developed, and among them, the 2-amino-6-[(1H-imidazol-2-ylmethyl)sulfanyl]-4-[4-(prop-2-en-1-yloxy)phenyl]pyridine-3,5-dicarbonitrile (3) is active in the low nanomolar range at these subtypes and shows a good trend of selectivity versus both the hA_2A and hA₃ ARs. This combined hA_1/hA_2B partial agonist activity leads to a synergistic effect on glucose homeostasis and could potentially be beneficial in treating diabetes and related complications.

Prediction of Conformation Specific Thermostabilizing Mutations for Class A G Protein-Coupled Receptors

G protein-coupled receptors (GPCRs) are highly flexible and prone to denaturation during protein extraction in detergents and purification. This poses a huge challenge to purify a conformationally homogeneous solution of GPCRs. Thermostabilizing mutations have been used widely to purify and obtain crystal structures of several GPCRs. However, identifying thermostabilizing mutations for GPCRs remains a tedious and expensive task as they are not transferable even among closely related GPCRs. Additionally, the mutations stabilizing one conformational state of a GPCR do not always stabilize other conformational state(s) of the same GPCR. Previously we developed a computational method, LiticonDesign, for rapid prediction of thermostabilizing mutations for a specific GPCR conformation. In this study, we have used LiticonDesign to predict thermostabilizing mutations for the agonist bound active-intermediate state of the human adenosine receptor (A2AR) using the structure of the inactive state of the same GPCR and vice versa. Our study shows that the thermostable mutation predictions using LiticonDesign, for an active-intermediate state of a GPCR (A2AR in our case), requires a homology model that is derived from an active/active-intermediate state GPCR structure as a template. Similarly, the homology models derived from inactive state GPCR conformations are better in predicting the thermostable mutations for the inactive state of A2AR. Overall, LiticonDesign method is not only efficient in predicting thermostabilizing mutations for a given GPCR sequence but also can recover conformation specific mutations for a state of interest, if a suitable starting structure of desired conformation is chosen.

Molecular Dynamics Simulations of the Allosteric Modulation of the Adenosine A2A Receptor by a Mini-G Protein

Through their coupling to G proteins, G Protein-Coupled Receptors (GPCRs) trigger cellular responses to various signals. Some recent experiments have interestingly demonstrated that the G protein can also act on the receptor by favoring a closed conformation of its orthosteric site, even in the absence of a bound agonist. In this work, we explored such an allosteric modulation by performing extensive molecular dynamics simulations on the adenosine A2 receptor (A2aR) coupled to the Mini-Gs protein. In the presence of the Mini-Gs, we confirmed a restriction of the receptor’s agonist binding site that can be explained by a modulation of the intrinsic network of contacts of the receptor. Of interest, we observed similar effects with the C-terminal helix of the Mini-Gs, showing that the observed effect on the binding pocket results from direct local contacts with the bound protein partner that cause a rewiring of the whole receptor’s interaction network.

Crystal structure of a ligand-free stable TSH receptor leucine-rich repeat domain

The crystal structures of the thyroid-stimulating hormone receptor (TSHR) leucine-rich repeat domain (amino acids 22-260; TSHR260) in complex with a stimulating human monoclonal autoantibody (M22TM) and in complex with a blocking human autoantibody (K1-70™) have been solved. However, attempts to purify and crystallise free TSHR260, that is not bound to an autoantibody, have been unsuccessful due to the poor stability of free TSHR260. We now describe a TSHR260 mutant that has been stabilised by the introduction of six mutations (H63C, R112P, D143P, D151E, V169R and I253R) to form TSHR260-JMG55TM, which is approximately 900 times more thermostable than wild-type TSHR260. These six mutations did not affect the binding of human TSHR monoclonal autoantibodies or patient serum TSHR autoantibodies to the TSHR260. Furthermore, the response of full-length TSHR to stimulation by TSH or human TSHR monoclonal autoantibodies was not affected by the six mutations. Thermostable TSHR260-JMG55TM has been purified and crystallised without ligand and the structure solved at 2.83 Å resolution. This is the first reported structure of a glycoprotein hormone receptor crystallised without ligand. The unbound TSHR260-JMG55TM structure and the M22 and K1-70 bound TSHR260 structures are remarkably similar except for small changes in side chain conformations. This suggests that neither the mutations nor the binding of M22TM or K1-70TM change the rigid leucine-rich repeat domain structure of TSHR260. The solved TSHR260-JMG55TM structure provides a rationale as to why the six mutations have a thermostabilising effect and provides helpful guidelines for thermostabilisation strategies of other soluble protein domains.

GPCR drug discovery: integrating solution NMR data with crystal and cryo-EM structures

The 826 G protein-coupled receptors (GPCRs) in the human proteome regulate key physiological processes and thus have long been attractive drug targets. With the crystal structures of more than 50 different human GPCRs determined over the past decade, an initial platform for structure-based rational design has been established for drugs that target GPCRs, which is currently being augmented with cryo-electron microscopy (cryo-EM) structures of higher-order GPCR complexes. Nuclear magnetic resonance (NMR) spectroscopy in solution is one of the key approaches for expanding this platform with dynamic features, which can be accessed at physiological temperature and with minimal modification of the wild-type GPCR covalent structures. Here, we review strategies for the use of advanced biochemistry and NMR techniques with GPCRs, survey projects in which crystal or cryo-EM structures have been complemented with NMR investigations and discuss the impact of this integrative approach on GPCR biology and drug discovery.

Computational design of thermostabilizing point mutations for G protein-coupled receptors

Engineering of GPCR constructs with improved thermostability is a key for successful structural and biochemical studies of this transmembrane protein family, targeted by 40% of all therapeutic drugs. Here we introduce a comprehensive computational approach to effective prediction of stabilizing mutations in GPCRs, named CompoMug, which employs sequence-based analysis, structural information, and a derived machine learning predictor. Tested experimentally on the serotonin 5-HT_2C receptor target, CompoMug predictions resulted in 10 new stabilizing mutations, with an apparent thermostability gain ~8.8°C for the best single mutation and ~13°C for a triple mutant. Binding of antagonists confers further stabilization for the triple mutant receptor, with total gains of ~21°C as compared to wild type apo 5-HT_2C. The predicted mutations enabled crystallization and structure determination for the 5-HT_2C receptor complexes in inactive and active-like states. While CompoMug already shows high 25% hit rate and utility in GPCR structural studies, further improvements are expected with accumulation of structural and mutation data.

The trillions of cells in the human body rely on receptors that sit in their cell membranes to communicate with each other. Hundreds of different receptors belong to the G protein-coupled receptor superfamily (called GPCRs for short) and play vital roles in the all organs and bodily systems. Indeed, GPCRs are the targets for almost 40% of therapeutic drugs. As such, deciphering the shape and activity of GPCRs is key to understanding the normal workings of the human biology and could help scientists discover new treatments for various diseases, from depression to high blood pressure to cancer. These receptors, however, are notoriously flimsy and unstable, making them difficult to work with in the laboratory.

Different approaches have been developed to make GPCRs more stable, usually by swapping one or a few of the amino acid building blocks in the protein for other amino acids. Currently, this requires a costly and slow trial-and-error approach in which each amino acid out of 300-400 in the protein is mutated and tested experimentally.

To speed up and reduce the cost of the process, Popov et al. asked if a computer could predict which mutations in the protein would stabilize it, meaning that fewer proteins would actually need to be tested. Four computer algorithms based on four different principles were developed and verified. The first one compares the target GPCR to other closely related receptors, trying to detect variations that cause the instability. The second tries to build in specific stabilizing interactions, or “bridges”, between different parts of the receptor. The third algorithm searches the known structures of other GPCRs for useful mutations. Finally, the fourth one uses accumulated data on the stability of hundreds of mutations in different GPCRs to train a machine learning predictor to recognize stabilizing mutations.

All four algorithms produced useful predictions in a real-life project. Indeed, when combined in one computational tool, named CompoMug, the algorithms made it possible to detect optimal mutations in a human GPCR called 5-HT_2C. This made the protein much easier to work with in the laboratory, and ultimately helped to solve its three-dimensional structure (which was reported in a separate study, published earlier in 2018)

The 5-HT_2C receptor is involved in regulating, among other things, mood and appetite. Details of its structure might therefore help researchers to design new antidepressants and obesity treatments. Moreover, CompoMug is already helping structural biologists to solve the structures of other GPCRs, which will further facilitate many aspects of GPCR drug discovery.

Enabling STD-NMR fragment screening using stabilized native GPCR: A case study of adenosine receptor

Structural studies of integral membrane proteins have been limited by the intrinsic conformational flexibility and the need to stabilize the proteins in solution. Stabilization by mutagenesis was very successful for structural biology of G protein-coupled receptors (GPCRs). However, it requires heavy protein engineering and may introduce structural deviations. Here we describe the use of specific calixarenes-based detergents for native GPCR stabilization. Wild type, full length human adenosine A_2A receptor was used to exemplify the approach. We could stabilize native, glycosylated, non-aggregated and homogenous A_2AR that maintained its ligand binding capacity. The benefit of the preparation for fragment screening, using the Saturation-Transfer Difference nuclear magnetic resonance (STD-NMR) experiment is reported. The binding of the agonist adenosine and the antagonist caffeine were observed and competition experiments with CGS-21680 and ZM241385 were performed, demonstrating the feasibility of the STD-based fragment screening on the native A_2A receptor. Interestingly, adenosine was shown to bind a second binding site in the presence of the agonist CGS-21680 which corroborates published results obtained with molecular dynamics simulation. Fragment-like compounds identified using STD-NMR showed antagonistic effects on A_2AR in the cAMP cellular assay. Taken together, our study shows that stabilization of native GPCRs represents an attractive approach for STD-based fragment screening and drug design.

New potent and selective A1 adenosine receptor antagonists as potential tools for the treatment of gastrointestinal diseases

The synthesis of 9-alkyl substituted adenine derivatives presenting aromatic groups and cycloalkyl rings in 8- and N⁶-position, respectively, is reported. The compounds were tested with radioligand binding studies showing, in some cases, a low nanomolar A₁ adenosine receptor affinity and a very good selectivity versus the other adenosine receptor subtypes. Functional assays at human adenosine receptors and at a mouse ileum tissue preparation clearly demonstrate the antagonist profile of these molecules, with inhibitory potency at nanomolar level. A molecular modeling study, consisting in docking analysis at the recently reported A₁ adenosine receptor crystal structure, was performed for the interpretation of the obtained pharmacological results. The N⁶-cyclopentyl-9-methyl-8-phenyladenine (17), resulting the most active derivative of the series (K_i = 2.8 nM and IC₅₀ = 14 nM), was also very efficacious in counteracting the effect of the agonist CCPA on mouse ileum contractility. This new compound represents a tool for the development of new agents for the treatment of intestinal diseases as constipation and postoperative ileus.

Structural Connection between Activation Microswitch and Allosteric Sodium Site in GPCR Signaling

Sodium ions are endogenous allosteric modulators of many G-protein-coupled receptors (GPCRs). Mutation of key residues in the sodium binding motif causes a striking effect on G-protein signaling. We report the crystal structures of agonist complexes for two variants in the first sodium coordination shell of the human A_2A adenosine receptor, D52^2.50N and S91^3.39A. Both structures present an overall active-like conformation; however, the variants show key changes in the activation motif NPxxY. Changes in the hydrogen bonding network in this microswitch suggest a possible mechanism for modified G-protein signaling and enhanced thermal stability. These structures, signaling data, and thermal stability analysis with a panel of pharmacological ligands provide a basis for understanding the role of the sodium-coordinating residues on stability and G-protein signaling. Utilizing the D^2.50N variant is a promising method for stabilizing class A GPCRs to accelerate structural efforts and drug discovery.

Human Adenosine A2A Receptor: Molecular Mechanism of Ligand Binding and Activation

Adenosine receptors (ARs) comprise the P1 class of purinergic receptors and belong to the largest family of integral membrane proteins in the human genome, the G protein-coupled receptors (GPCRs). ARs are classified into four subtypes, A₁, A_2A, A_2B, and A₃, which are all activated by extracellular adenosine, and play central roles in a broad range of physiological processes, including sleep regulation, angiogenesis and modulation of the immune system. ARs are potential therapeutic targets in a variety of pathophysiological conditions, including sleep disorders, cancer, and dementia, which has made them important targets for structural biology. Over a decade of research and innovation has culminated with the publication of more than 30 crystal structures of the human adenosine A_2A receptor (A_2AR), making it one of the best structurally characterized GPCRs at the atomic level. In this review we analyze the structural data reported for A_2AR that described for the first time the binding of mode of antagonists, including newly developed drug candidates, synthetic and endogenous agonists, sodium ions and an engineered G protein. These structures have revealed the key conformational changes induced upon agonist and G protein binding that are central to signal transduction by A_2AR, and have highlighted both similarities and differences in the activation mechanism of this receptor compared to other class A GPCRs. Finally, comparison of A_2AR with the recently solved structures of A₁R has provided the first structural insight into the molecular determinants of ligand binding specificity in different AR subtypes.

Synergistic Use of GPCR Modeling and SDM Experiments to Understand Ligand Binding

There is a substantial amount of historical ligand binding data available from site-directed mutagenesis (SDM) studies of many different GPCR subtypes. This information was generated prior to the wave of GPCR crystal structure, in an effort to understand ligand binding with a view to drug discovery. Concerted efforts to determine the atomic structure of GPCRs have proven extremely successful and there are now more than 80 GPCR crystal structure in the PDB database, many of which have been obtained in the presence of receptor ligands and associated G proteins. These structural data enable the generation of computational model structures for all GPCRs, including those for which crystal structures do not yet exist. The power of these models in designing novel ligands, especially those with improved residence times, and for better understanding receptor function can be enhanced tremendously by combining them synergistically with historic SDM ligand binding data. Here, we describe a protocol by which historic SDM binding data and receptor models may be used together to identify novel key residues for mutagenesis studies.

Strategy for the Thermostabilization of an Agonist-Bound GPCR Coupled to a G Protein

Structure determination of G protein-coupled receptors (GPCRs) in the inactive state bound to high-affinity antagonists has been very successful through the implementation of a number of protein engineering and crystallization strategies. However, the structure determination of GPCRs in their fully active state coupled to a G protein is still very challenging. Recently, mini-G proteins were developed, which recapitulate the coupling of a full heterotrimeric G protein to a GPCR despite being less than one-third of the size. This allowed the structure determination of the agonist-bound adenosine A_2A receptor (A_2AR) coupled to mini-G_s. Although this is extremely encouraging, A_2AR is very stable compared with many other GPCRs, particularly when an agonist is bound. In contrast, the agonist-bound conformation of the human corticotropin-releasing factor receptor is considerably less stable, impeding the formation of good quality crystals for structure determination. We have therefore developed a novel strategy for the thermostabilization of a GPCR-mini-G protein complex. In this chapter, we will describe the theoretical and practical principles of the thermostability assay for stabilizing this complex, discuss its strengths and weaknesses, and show some typical results from the thermostabilization process.

Mini-G proteins: Novel tools for studying GPCRs in their active conformation

Mini-G proteins are the engineered GTPase domains of Gα subunits. They couple to GPCRs and recapitulate the increase in agonist affinity observed upon coupling of a native heterotrimeric G protein. Given the small size and stability of mini-G proteins, and their ease of expression and purification, they are ideal for biophysical studies of GPCRs in their fully active state. The first mini-G protein developed was mini-G_s. Here we extend the family of mini-G proteins to include mini-G_olf, mini-G_i1, mini-G_o1 and the chimeras mini-G_s/q and mini-G_s/i. The mini-G proteins were shown to couple to relevant GPCRs and to form stable complexes with purified receptors that could be purified by size exclusion chromatography. Agonist-bound GPCRs coupled to a mini-G protein showed higher thermal stability compared to the agonist-bound receptor alone. Fusion of GFP at the N-terminus of mini-G proteins allowed receptor coupling to be monitored by fluorescence-detection size exclusion chromatography (FSEC) and, in a separate assay, the affinity of mini-G protein binding to detergent-solubilised receptors was determined. This work provides the foundation for the development of any mini-G protein and, ultimately, for the structure determination of GPCRs in a fully active state.

Expression, Purification and Crystallisation of the Adenosine A2A Receptor Bound to an Engineered Mini G Protein

G protein-coupled receptors (GPCRs) promote cytoplasmic signalling by activating heterotrimeric G proteins in response to extracellular stimuli such as light, hormones and nucleosides. Structure determination of GPCR-G protein complexes is central to understanding the precise mechanism of signal transduction. However, these complexes are challenging targets for structural studies due to their conformationally dynamic and inherently transient nature. We recently developed an engineered G protein, mini-Gs, which addressed these problems and allowed the formation of a stable GPCR-G protein complex. Mini-Gs facilitated the structure determination of the human adenosine A2A receptor (A2AR) in its G protein-bound conformation at 3.4 Å resolution. Here, we describe a step by step protocol for the expression and purification of A2AR, and crystallisation of the A2AR-mini-Gs complex.

Amino acid polymorphisms in the fibronectin-binding repeats of fibronectin-binding protein A affect bond strength and fibronectin conformation

The Staphylococcus aureus cell surface contains cell wall-anchored proteins such as fibronectin-binding protein A (FnBPA) that bind to host ligands (e.g. fibronectin; Fn) present in the extracellular matrix of tissue or coatings on cardiac implants. Recent clinical studies have found a correlation between cardiovascular infections caused by S. aureus and nonsynonymous SNPs in FnBPA. Atomic force microscopy (AFM), surface plasmon resonance (SPR), and molecular simulations were used to investigate interactions between Fn and each of eight 20-mer peptide variants containing amino acids Ala, Asn, Gln, His, Ile, and Lys at positions equivalent to 782 and/or 786 in Fn-binding repeat-9 of FnBPA. Experimentally measured bond lifetimes (1/k_off) and dissociation constants (K_d = k_off/k_on), determined by mechanically dissociating the Fn·peptide complex at loading rates relevant to the cardiovascular system, varied from the lowest-affinity H782A/K786A peptide (0.011 s, 747 μm) to the highest-affinity H782Q/K786N peptide (0.192 s, 15.7 μm). These atomic force microscopy results tracked remarkably well to metadynamics simulations in which peptide detachment was defined solely by the free-energy landscape. Simulations and SPR experiments suggested that an Fn conformational change may enhance the stability of the binding complex for peptides with K786I or H782Q/K786I (K_d^app = 0.2-0.5 μm, as determined by SPR) compared with the lowest-affinity double-alanine peptide (K_d^app = 3.8 μm). Together, these findings demonstrate that amino acid substitutions in Fn-binding repeat-9 can significantly affect bond strength and influence the conformation of Fn upon binding. They provide a mechanistic explanation for the observation of nonsynonymous SNPs in fnbA among clinical isolates of S. aureus that cause endovascular infections.

Current strategies for protein production and purification enabling membrane protein structural biology

Membrane proteins are still heavily under-represented in the protein data bank (PDB), owing to multiple bottlenecks. The typical low abundance of membrane proteins in their natural hosts makes it necessary to overexpress these proteins either in heterologous systems or through in vitro translation/cell-free expression. Heterologous expression of proteins, in turn, leads to multiple obstacles, owing to the unpredictability of compatibility of the target protein for expression in a given host. The highly hydrophobic and (or) amphipathic nature of membrane proteins also leads to challenges in producing a homogeneous, stable, and pure sample for structural studies. Circumventing these hurdles has become possible through the introduction of novel protein production protocols; efficient protein isolation and sample preparation methods; and, improvement in hardware and software for structural characterization. Combined, these advances have made the past 10-15 years very exciting and eventful for the field of membrane protein structural biology, with an exponential growth in the number of solved membrane protein structures. In this review, we focus on both the advances and diversity of protein production and purification methods that have allowed this growth in structural knowledge of membrane proteins through X-ray crystallography, nuclear magnetic resonance (NMR) spectroscopy, and cryo-electron microscopy (cryo-EM).

How Do Short Chain Nonionic Detergents Destabilize G-Protein-Coupled Receptors?

Stability of detergent-solubilized G-protein-coupled receptors (GPCRs) is crucial for their purification in a biologically relevant state, and it is well-known that short chain detergents such as octylglucoside are more denaturing than long chain detergents such as dodecylmaltoside. However, the molecular basis for this phenomenon is poorly understood. To gain insights into the mechanism of detergent destabilization of GPCRs, we used atomistic molecular dynamics simulations of thermostabilized adenosine receptor (A2AR) mutants embedded in either a lipid bilayer or detergent micelles of alkylmaltosides and alkylglucosides. A2AR mutants in dodecylmaltoside or phospholipid showed low flexibility and good interhelical packing. In contrast, A2AR mutants in either octylglucoside or nonylglucoside showed decreased α-helicity in transmembrane regions, decreased α-helical packing, and the interpenetration of detergent molecules between transmembrane α-helices. This was not observed in octylglucoside containing phospholipid. Cholesteryl hemisuccinate in dodecylmaltoside increased the energetic stability of the receptor by wedging into crevices on the hydrophobic surface of A2AR, increasing packing interactions within the receptor and stiffening the detergent micelle. The data suggest a three-stage process for the initial events in the destabilization of GPCRs by octylglucoside: (i) highly mobile detergent molecules form small micelles around the receptor; (ii) loss of α-helicity and decreased interhelical packing interactions in transmembrane regions are promoted by increased receptor thermal motion; (iii) transient separation of transmembrane helices allowed penetration of detergent molecules into the core of the receptor. The relative hydration of the headgroup and alkyl chain correlates with detergent harshness and suggests new avenues to develop milder versions of octylglucoside for receptor crystallization.

Engineering a minimal G protein to facilitate crystallisation of G protein-coupled receptors in their active conformation

G protein-coupled receptors (GPCRs) modulate cytoplasmic signalling in response to extracellular stimuli, and are important therapeutic targets in a wide range of diseases. Structure determination of GPCRs in all activation states is important to elucidate the precise mechanism of signal transduction and to facilitate optimal drug design. However, due to their inherent instability, crystallisation of GPCRs in complex with cytoplasmic signalling proteins, such as heterotrimeric G proteins and β-arrestins, has proved challenging. Here, we describe the design of a minimal G protein, mini-G_s, which is composed solely of the GTPase domain from the adenylate cyclase stimulating G protein G_s. Mini-G_s is a small, soluble protein, which efficiently couples GPCRs in the absence of Gβγ subunits. We engineered mini-G_s, using rational design mutagenesis, to form a stable complex with detergent-solubilised β₁-adrenergic receptor (β₁AR). Mini G proteins induce similar pharmacological and structural changes in GPCRs as heterotrimeric G proteins, but eliminate many of the problems associated with crystallisation of these complexes, specifically their large size, conformational dynamics and instability in detergent. They are therefore novel tools, which will facilitate the biochemical and structural characterisation of GPCRs in their active conformation.

Micro-scale and rapid expression screening of highly expressed and/or stable membrane protein variants in Saccharomyces cerevisiae

Purification of milligram quantities of target proteins is required for structural and biophysical studies. However, mammalian membrane proteins, many of which are important therapeutic targets, are too unstable to be expressed in heterologous hosts and to be solubilized by detergents. One of the most promising ways to overcome these limitations is to stabilize the membrane proteins by generating variants via introduction of truncated flexible regions, fusion partners, and site-directed mutagenesis. Therefore, an effective screening strategy is a key to obtaining successful protein stabilization. Herein, we report the micro-scale and high-throughput screening of stabilized membrane protein variants using Saccharomyces cerevisiae as a host. All steps of the screening, including cultivation and disruption of cells, solubilization of the target protein, and the pretreatment for fluorescence-detected size exclusion chromatography (FSEC), could be performed in a 96-well microplate format. We demonstrated that the dispersion among wells was small, enabling detection of a small but important improvement in the protein stability. We also demonstrated that the thermally stable mutants of a human G protein-coupled receptor could be distinguished based on an increase of the peak height in the FSEC profile, which was well correlated with increased ligand binding activity of the protein. This strategy represents a significant platform for handling numerous mutants, similar to alanine scanning.

A mutagenesis and screening strategy to generate optimally thermostabilized membrane proteins for structural studies

The thermostability of an integral membrane protein (MP) in detergent solution is a key parameter that dictates the likelihood of obtaining well-diffracting crystals that are suitable for structure determination. However, many mammalian MPs are too unstable for crystallization. We developed a thermostabilization strategy based on systematic mutagenesis coupled to a radioligand-binding thermostability assay that can be applied to receptors, ion channels and transporters. It takes ∼6-12 months to thermostabilize a G-protein-coupled receptor (GPCR) containing 300 amino acid (aa) residues. The resulting thermostabilized MPs are more easily crystallized and result in high-quality structures. This methodology has facilitated structure-based drug design applied to GPCRs because it is possible to determine multiple structures of the thermostabilized receptors bound to low-affinity ligands. Protocols and advice are given on how to develop thermostability assays for MPs and how to combine mutations to make an optimally stable mutant suitable for structural studies. The steps in the procedure include the generation of ∼300 site-directed mutants by Ala/Leu scanning mutagenesis, the expression of each mutant in mammalian cells by transient transfection and the identification of thermostable mutants using a thermostability assay that is based on binding of an (125)I-labeled radioligand to the unpurified, detergent-solubilized MP. Individual thermostabilizing point mutations are then combined to make an optimally stable MP that is suitable for structural biology and other biophysical studies.

Structurally Enabled Discovery of Adenosine A2A Receptor Antagonists

Over the past decade there has been a revolution in the field of G protein-coupled receptor (GPCR) structural biology. Many years of innovative research from different areas have come together to fuel this significant change in the fortunes of this field, which for many years was characterized by the paucity of high-resolution structures. The determination to succeed has been in part due to the recognized importance of these proteins as drug targets, and although the pharmaceutical industry has been focusing on these receptors, it can be justifiably argued and demonstrated that many of the approved and commercially successful GPCR drugs can be significantly improved to increase efficacy and/or reduce undesired side effects. In addition, many validated targets in this class remain to be drugged. It is widely recognized that application of structure-based drug design approaches can help medicinal chemists a long way toward discovering better drugs. The achievement of structural biologists in providing high-resolution insight is beginning to transform drug discovery efforts, and there are a number of GPCR drugs that have been discovered by use of structural information that are in clinical development. This review aims to highlight the key developments that have brought success to GPCR structure resolution efforts and exemplify the practical application of structural information for the discovery of adenosine A_2A receptor antagonists that have potential to treat multiple conditions.

Thermostabilization of the Human Endothelin Type B Receptor

The peptide hormone endothelin, produced by the vascular endothelium, is involved in several physiological functions, including maintenance of vascular tone and humoral homeostasis. Endothelin transmits signals through the endothelin receptor, a G-protein-coupled receptor. Structural studies of the endothelin type B receptor (ETBR) have been unsuccessful due to its structural flexibility and instability in detergent-solubilized solution. To overcome these problems, we explored thermostabilization of human ETBR by establishing an ETBR expression system in Escherichia coli, followed by systematic alanine scanning mutagenesis. Among 297 point mutations, 11 thermostabilizing residues were selected and further mutated to other amino acids. The thermostability indices of these residues, represented by the ratios of endothelin-1 (ET-1) binding activities with or without heat treatment at 27°C for 30min in a ligand-free form, were compared. The ligand affinity and apparent melting temperature (Tm) of the five most thermostable mutants, R124Y, D154A, K270A, S342A, and I381A, were then examined. The apparent Tm of three single mutants, R124Y, D154A, and K270A, was approximately 7°C higher than that of the wild type. The apparent Tm value of a combination of the five residues, named the Y5 ETBR mutant, was 17°C higher than that of the wild type. The Y5 ETBR mutant exhibited an affinity for ET-1 and activated Gq similar to the wild type. Further investigation of the pharmacological properties affected by combinatorial mutations of ET-1, ET-3, TxET-1, and K8794 suggested that Y5 ETBR is highly suitable for representing a ligand-free form of ETBR and is potentially applicable for studying an ET-1-bound form.

Nanodisc-Tm: Rapid functional assessment of nanodisc reconstituted membrane proteins by CPM assay

Membrane proteins are generally unstable in detergents. Therefore, biochemical and biophysical studies of membrane proteins in lipidic environments provides a near native-like environment suitable for membrane proteins. However, manipulation of proteins embedded in lipid bilayer has remained difficult. Methods such as nanodiscs and lipid cubic phase have been developed for easy manipulation of membrane proteins and have yielded significant insights into membrane proteins. Traditionally functional reconstitution of receptors in nanodiscs has been studied with radioligands. We present a simple and faster method for studying the functionality of reconstituted membrane proteins for routine characterization of protein batches after initial optimization of suitable conditions using radioligands. The benefits of the method are •Faster and generic method to assess functional reconstitution of membrane proteins.•Adaptable in high throughput format (≥96 well format).•Stability measurement in near-native lipid environment and lipid dependent melting temperatures.

Engineering therapeutic antibodies targeting G-protein-coupled receptors

G-protein–coupled receptors (GPCRs) are one of the most attractive therapeutic target classes because of their critical roles in intracellular signaling and their clinical relevance to a variety of diseases, including cancer, infection and inflammation. However, high conformational variability, the small exposed area of extracellular epitopes and difficulty in the preparation of GPCR antigens have delayed both the isolation of therapeutic anti-GPCR antibodies as well as studies on the structure, function and biochemical mechanisms of GPCRs. To overcome the challenges in generating highly specific anti-GPCR antibodies with enhanced efficacy and safety, various forms of antigens have been successfully designed and employed for screening with newly emerged systems based on laboratory animal immunization and high-throughput-directed evolution.

Computational Prediction and Biochemical Analyses of New Inverse Agonists for the CB1 Receptor

Human cannabinoid type 1 (CB1) G-protein coupled receptor is a potential therapeutic target for obesity. The previously predicted and experimentally validated ensemble of ligand-free conformations of CB1 [Scott, C. E. et al. Protein Sci. 2013 , 22 , 101 - 113 ; Ahn, K. H. et al. Proteins 2013 , 81 , 1304 - 1317] are used here to predict the binding sites for known CB1-selective inverse agonists including rimonabant and its seven known derivatives. This binding pocket, which differs significantly from previously published models, is used to identify 16 novel compounds expected to be CB1 inverse agonists by exploiting potential new interactions. We show experimentally that two of these compounds exhibit inverse agonist properties including inhibition of basal and agonist-induced G-protein coupling activity, as well as an enhanced level of CB1 cell surface localization. This demonstrates the utility of using the predicted binding sites for an ensemble of CB1 receptor structures for designing new CB1 inverse agonists.

How Can Mutations Thermostabilize G-Protein-Coupled Receptors?

Structures of over 30 different G-protein-coupled receptors (GPCRs) have advanced our understanding of cell signaling and have provided a foundation for structure-guided drug design. This exciting progress has required the development of three complementary methods to facilitate GPCR crystallization, one of which is the thermostabilization of receptors by systematic mutagenesis. However, the reason why a particular mutation, or combination of mutations, stabilizes the receptor is not always evident from a static crystal structure. Molecular dynamics (MD) simulations have been used to identify and estimate the energetic factors that affect thermostability through comparing the dynamics of the thermostabilized receptors with structure-based models of the wild-type receptor. The data indicate that receptors are stabilized through a combination of factors, including an increase in receptor rigidity, a decrease in collective motion, reduced stress at specific residues, and the presence of ordered water molecules. Predicting thermostabilizing mutations computationally represents a major challenge for the field.