Semiconductor-based Photocatalytic Hydrogen Generation

Anchoring ZnIn2S4 nanosheets on cross-like FeSe2 to construct photothermal-enhanced S-scheme heterojunction for photocatalytic H2 evolution

Rational design of the morphology and heterojunction to accelerate the separation of electron-hole pairs has played an indispensable role in improving the photocatalytic hydrogen evolution. ZnIn2S4 (ZIS) has aroused considerable attention in solar-to-chemical energy conversion due to its remarkable photoelectrical properties and relatively negative energy band, whereas it still suffers from the severe photogenerated carrier recombination and catalyst aggregation. Herein, guided by density functional theory calculations, the constructed FeSe2@ZnIn2S4 (FS@ZIS) heterojunction model has a hydrogen Gibbs free energy closer to zero compared with pure ZIS and FS, which is beneficial for hydrogen adsorption and desorption on the photocatalyst surface. Therefore, a novel cross-like core-shell FS@ZIS Step-scheme (S-scheme) heterojunction was synthesized successfully by in-situ growing ZIS nanosheets on the surface of cross-like FS. The structure with cross-like core-shell morphology not only inhibits the agglomeration of ZIS to increase specific surface area, but also provides a tight interface with S-scheme heterojunction. Moreover, the S-scheme heterojunction with a tight interface can effectively separate electron-hole pairs, leaving photoinduced charges with higher potentials. Furthermore, FS@ZIS-20 possesses exceptional photothermal capabilities, enabling the conversion of optical energy from visible and near infrared light to heat, thereby further enhancing the photocatalysis reaction. As a result, the cross-like core-shell FS@ZIS S-scheme heterojunction exhibits an excellent photocatalytic hydrogen evolution rate (7.640 mmol g-1 h-1), which is 24 times higher than that of pure ZIS (0.319 mmol g-1 h-1) under visible and near infrared light. Furthermore, employing more in-depth density functional theory calculations further investigates the charge transfer pathway of the FS@ZIS S-scheme heterojunction. This work provides insights into the construction of S-scheme heterojunctions with core-shell structure and photothermal effect for photocatalytic evolution hydrogen.

Unveiling the influence of hydrophobicity on inhibiting hydrogen dissociation for enhanced photocatalytic hydrogen evolution of covalent organic frameworks

Covalent organic frameworks (COFs) have gained considerable interest as candidate photocatalysts for hydrogen evolution. In this work, we synthesized β-keto-enamine-based COFs (TpPa-X, TpDB, and TpDTP) to explore the relations between structures and photocatalytic hydrogen evolution. COFs were divided into two groups: (1) TpPa-X with different substituents attached to the TpPa backbone and (2) COFs featuring diamine linkers of varied lengths (TpDB and TpDTP). Experiments and density functional theory (DFT) calculations show that moderate hydrophobicity is favorable for the photocatalytic hydrogen evolution process, and acceptable contact angles are anticipated to range from 65° to 80°. Naturally, there are comprehensive factors that affect photocatalytic reactions, and the regulation of different backbones and substituents can considerably affect the performance of COFs for photocatalytic hydrogen evolution in terms of electronic structure, specific surface area, surface wettability, carrier separation efficiency, and hydrogen dissociation energy. Results show that TpPa-Cl2 (TpPa-X, X  = Cl2) demonstrates the highest photocatalytic activity, approximately 14.51 mmol g-1h-1, with an apparent quantum efficiency of 4.62 % at 420 nm. This work provides guidance for designing efficient COF-based photocatalysts.

Band alignment of CoO(100)-water and CoO(111)-water interfaces accelerated by machine learning potentials

Cobalt monoxide (CoO) nanomaterials have drawn attention for their remarkable photocatalytic water splitting without an externally applied potential or co-catalyst. The success of overall water splitting is due to the appropriate band edge positions of the catalyst, which span the redox potentials of water splitting. Typically, CoO nanomaterials possess complex morphologies, which consist of multiple active surfaces. As a result, the precise roles of the surfaces in the overall water-splitting process remain to be elucidated. In this work, we have undertaken a thorough investigation into the band alignments at the CoO(100)-water and CoO(111)-water interfaces using ab initio molecular dynamics and machine learning accelerated molecular dynamics simulations. The results of band alignment reveal that CoO(100) supports both the Hydrogen Evolution Reaction (HER) and the oxygen evolution reaction, whereas CoO(111) only facilitates the HER. Moreover, the variance in band positions between CoO(100) and CoO(111) results in an intrinsic potential difference, facilitating the migration of electrons toward CoO(100), while holes accumulate on CoO(111). The separation of photoexcited carriers effectively promotes water splitting in CoO.

Reversible Photochromic Phenomenon of Plasmonic Metal/Semiconductor Heterostructures via Photoinduced Electron Storage

The transfer and migration process of the photogenerated charge carriers in plasmonic metal/semiconductor heterostructures not only affects their photocatalytic performance but also triggers some captivating phenomena. Here, a reversible photochromic behavior is observed on the Au/CdS heterostructures when they are investigated as photocatalysts for hydrogen production. The photochromism takes place upon excitation of the CdS component, in which the photogenerated holes are rapidly consumed by ethanol, while the electrons are transferred and stored on the Au cores, resulting in the blue shift of their localized surface plasmon resonance. The colloidal solution can restore its initial color after pumping with air, and the photochromic behavior can be cycled five times without obvious degradation. The finding represents great progress toward the photochromic mechanism of metal/semiconductor heterostructures and also reveals the importance of understanding the dynamic process of the photogenerated charge carriers in these heterostructures.

Rational regulation of post-electrodialysis electrochromic anion exchange membranes via TiO2@Ag synergistically strengthens visible-light photocatalytic anti-contamination activity

Membrane-contamination during electrodialysis (ED) process is still a non-negligible challenge, while irreversible consumption and unsustainability have become the main bottlenecks limiting the improvement of anion exchange membranes (AEMs) anti-contamination activity. Here, we introduce a novel approach to design AEMs by chemically assembling 4-pyndinepropanol with bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) in an electrochromic-inspired process. Subsequently, the co-mingled TiO2@Ag nanosheet with the casting-solution were sprayed onto the surface of the substrate membrane to create a micrometer-thick interfacial layer. The addition of Ag nanoparticles (NPs) enhances the active sites of TiO2, resulting in stronger local surface plasmon resonance (LSPR) effects and reducing its energy band gap limitation (From 3.11 to 2.63 eV). Post-electrodialysis electrochromic AEMs incorporating TiO2@Ag exhibit synergistic enhancement of sunlight absorption, effectively suppressing photogenerated carrier binding and promoting migration. These resultant-membranes demonstrate significantly improved bacterial inhibition properties (42.0-fold increase for E. coli) and degradation activity (7.59-fold increase for rhodamine B) compared to pure TiO2 membranes. Importantly, they maintain photocatalytic activity without compromising salt-separation performance or stability, as the spraying process utilizes the same substrate materials. This approach to rational design and regulation of anti-contamination AEMs offers new insights into the collaborative synergy of color-changing and photocatalytic materials.

Polytypic metal chalcogenide nanocrystals

By engineering chemically identical but structurally distinct materials into intricate and sophisticated polytypic nanostructures, which often surpass their pure phase objects and even produce novel physical and chemical properties, exciting applications in the fields of photovoltaics, electronics and photocatalysis can be achieved. In recent decades, various methods have been developed for synthesizing a library of polytypic nanocrystals encompassing IV, III-V and II-VI polytypic semiconductors. The exceptional performances of polytypic metal chalcogenide nanocrystals have been observed, making them highly promising candidates for applications in photonics and electronics. However, achieving high-precision control over the morphology, composition, crystal structure, size, homojunctions, and periodicity of polytypic metal chalcogenide nanostructures remains a significant synthetic challenge. This review article offers a comprehensive overview of recent progress in the synthesis and control of polytypic metal chalcogenide nanocrystals using colloidal synthetic strategies. Starting from a concise introduction on the crystal structures of metal chalcogenides, the subsequent discussion delves into the colloidal synthesis of polytypic metal chalcogenide nanocrystals, followed by an in-depth exploration of the key factors governing polytypic structure construction. Subsequently, we provide comprehensive insights into the physical properties of polytypic metal chalcogenide nanocrystals, which exhibit strong correlations with their applications. Thereafter, we emphasize the significance of polytypic nanostructures in various applications, such as photovoltaics, photocatalysis, transistors, thermoelectrics, stress sensors, and the electrocatalytic hydrogen evolution. Finally, we present a summary of the recent advancements in this research field and provide insightful perspectives on the forthcoming challenges, opportunities, and future research directions.

Surface properties of carbon nitride materials used in photocatalytic systems for energy and environmental applications

The use of photocatalytic systems involving semiconductor materials for environmental and energy applications, such as water remediation and clean energy production, is highly significant. In line with this, a family of carbon-based polymeric materials known as carbon nitride (CNx) has emerged as a promising candidate for this purpose. Despite CNx's remarkable characteristics of performance, stability, and visible light responsiveness, its chemical inertness and poor surface properties hinder interfacial interactions, which are key to effective catalysis. This highlight reviews the literature focusing on the surface chemistry of CNx, especially its structural formation pathway, reactivity, and solvent interactions. It also explores recent advancements in the use of modified CNx for hydrogen production and arsenic remediation, offering recommendations for future material design improvements.

Enhanced Photothermal-Assisted Hydrogen Production via a Porous Carbon@MoS2/ZnIn2S4 Type II-S-Scheme Tandem Heterostructure

MoS2/ZnIn2S4 flower-like heterostructures into porous carbon (PC@MoS2/ZIS) are embedded. This ternary heterostructure demonstrates enhanced light absorption across a broad spectral range from 200 to 2500 nm. It features both Type-II and S-scheme dual heterojunction interfaces, which facilitate the generation, separation, and transfer of photoinduced carriers. The PC enveloped by MoS2/ZIS composite microspheres serves as a photothermal source, providing additional energy to the carriers. This process accelerates charge separation and migration, enhancing photothermal-assisted photocatalytic H2 evolution. The optimal H2 evolution rate for PC@MoS2/ZIS reaches an impressive 18.79 mmol g-1 h-1, with an apparent quantum efficiency of 14.1% at 400 nm. This work presents a promising approach for effectively integrating multicomponent heterostructures with photothermal effects, offering innovative strategies for efficient solar energy utilization and conversion.

An Artificial Leaf with Patterned Photocatalysts for Sunlight-Driven Water Splitting

Plant leaves can turn entirely absorbed light into chemical energy due to their spatially separated photosystems I and II in the thylakoid membrane that enables unidirectional Z-scheme type charge transfer between them. In artificial systems that mimic leaves, a lack of spatial and interfacial control of active units (i.e., hydrogen evolution photocatalyst/HEP and oxygen evolution photocatalyst/OEP) introduces competitive charge transfer channels between them, resulting in deficient Z-scheme type charge transfer. Herein, we demonstrate that a patterned photocatalyst sheet, namely, an artificial leaf, comprising an ordered and separated distribution of the OEP and HEP strips on a conductive substrate, achieves unidirectional Z-scheme type charge transfer as the leaves do. It represents a next-generation photocatalytic system that mimics the leaves to bring breakthrough in photocatalytic over water splitting performance with the combination of highly active HEP and OEP photocatalysts, opening up a promising avenue toward solar energy conversion by artificial photosynthesis.

Recent Advances and Insights in Designing ZnxCd1-xS-Based Photocatalysts for Hydrogen Production and Synergistic Selective Oxidation to Value-Added Chemical Production

Combining the hydrogen (H2) extraction process and organic oxidation synthesis in photooxidation-reduction reactions mediated by semiconductors is a desirable strategy because rich chemicals are evolved as byproducts along with hydrogen in trifling conditions upon irradiation, which is the only effort. The bifunctional photocatalytic strategy facilitates the feasible formation of a C═O/C─C bond from a large number of compounds containing a X-H (X = C, O) bond; therefore, the production of H2 can be easily realized without support from third agents like chemical substances, thus providing an eco-friendly and appealing organic synthesis strategy. Among the widely studied semiconductor nanomaterials, ZnxCd1-xS has been continuously studied and explored by researchers over the years, and it has attracted much consideration owing to its unique advantages such as adjustable band edge position, rich elemental composition, excellent photoelectric properties, and ability to respond to visible light. Therefore, nanostructures based on ZnxCd1-xS have been widely studied as a feasible way to efficiently prepare hydrogen energy and selectively oxidize it into high-value fine chemicals. In this Review, first, the crystal and energy band structures of ZnxCd1-xS, the model of twin nanocrystals, the photogenerated charge separation mechanism of the ZB-WZ-ZB homojunction with crisscross bands, and the Volmer-Weber growth mechanism of ZnxCd1-xS are described. Second, the morphology, structure, modification, synthesis, and vacancy engineering of ZnxCd1-xS are surveyed, summarized, and discussed. Then, the research progress in ZnxCd1-xS-based photocatalysis in photocatalytic hydrogen extraction (PHE) technology, the mechanism of PHE, organic substance (benzyl alcohol, methanol, etc.) dehydrogenation, the factors affecting the efficiency of photocatalytic discerning oxidation of organic derivatives, and selective C-H activation and C-C coupling for synergistic efficient dehydrogenation of photocatalysts are described. Conclusively, the challenges in the applicability of ZnxCd1-xS-based photocatalysts are addressed for further research development along this line.

Advances in the heterostructures for enhanced hydrogen production efficiency: a comprehensive review

The growing global energy demand and heightened environmental consciousness have contributed to the increasing interest in green energy sources, including hydrogen production. However, the efficacy of this technology is contingent upon the efficient separation of charges, high absorption of sunlight, rapid charge transfer rate, abundant active sites and resistance to photodegradation. The utilization of photocatalytic heterostructures coupling two materials has proved to be effective in tackling the aforementioned challenges and delivering exceptional performance in the production of hydrogen. The present article provides a comprehensive overview of operational principles of photocatalysis and the combination of photocatalytic and piezo-catalytic applications with heterostructures, including the transfer behavior and mechanisms of photoexcited non-equilibrium carriers between the materials. Furthermore, the effects of recent advances and state-of-the-art designs of heterostructures on hydrogen production are discussed, offering practical approaches to form heterostructures for efficient hydrogen production.

Ag+-Induced Assembly of Pt Clusters for Photocatalytic Hydrogen Production

Cluster-assembled nanowires provide a unique strategy for the preparation of high-performance nanostructures. However, existing preparations are limited by complex processes and harsh reaction conditions. Here, Ag+ ions were utilized as a novel structure-directing agent to generate the self-assembly of Pt clusters to form ultrafine nanowires with a diameter of less than 5 nm. Electrospray ionization mass spectrometry (ESI-MS) and extended X-ray absorption fine structure (EXAFS) characterizations demonstrated that every Ag+ bridged two [Pt3(CO)3(μ2-CO)3]n2- clusters through coordination and formed a sandwich-like structure of [Pt3(CO)3(μ2-CO)3]nAg[Pt3(CO)3(μ2-CO)3]m3-. As a result, multiple sandwich-like structures of [Pt3(CO)3(μ2-CO)3]nAg[Pt3(CO)3(μ2-CO)3]m3- were established by Ag+ to form Pt nanowire superstructures {[Pt3(CO)6]nAg[Pt3(CO)6]mAg[Pt3(CO)6]x}∞ (abbreviated as Ag-Pt NWS). Our results demonstrate that the Pt nanowire superstructures showed promising cocatalytic performance for photocatalytic H2 production with the involvement of Ag+, which promises a desirable way to develop advanced functional nanomaterials.

A special coupling strategy: Cu2MoS4 as a large-sized co-catalyst for promoting photocatalytic hydrogen production performance

The photocatalytic hydrogen production performance of semiconductor materials can be improved by co-catalyst modification. In most of the studies, the size of the co-catalyst is relatively small compared to the primary catalyst. However, in this study, we employed a novel strategy by synthesizing a relatively large-sized Cu2MoS4 as the co-catalyst and in situ loading smaller-sized Zn0.5Cd0.5S onto Cu2MoS4, verifying that Cu2MoS4 enhances the photocatalytic hydrogen production efficiency of Zn0.5Cd0.5S. It can be observed by scanning electron microscopy (SEM) that the lateral size of 2D Cu2MoS4 is at least 50 times larger than the Zn0.5Cd0.5S nanoparticle particle size. In addition, Density Functional Theory (DFT) calculations have demonstrated that the active site for hydrogen production in the composite is located in Cu2MoS4. The large-sized of Cu2MoS4 not only provides more active sites but also broadens the electron transport channel, which is conducive to promoting the transfer of photogenerated electrons from Zn0.5Cd0.5S. This work enriches the study of large-sized materials as co-catalyst and provides a strategy for the construction of composite catalysts.

Single-Atom based Metal-Organic Framework Photocatalysts for Solar-Fuel Generation

The growing demand for fossil fuels and subsequent CO2 emissions prompted a search for alternate sources of energy and a reduction in CO2. Photocatalysis driven by solar light has been found as a potential research area to tackle both these problems. In this direction, SAC@MOF (Single-atom loaded MOFs) photocatalysis is an emerging field and a promising technology. The unique properties of single-atom catalysts (SACs), such as high catalytic activity and selectivity, are leveraged in these systems. Photocatalysis, focusing on the utilization of Metal-Organic Frameworks (MOFs) as platforms for creating single-atom catalysts (SACs) characterized by metal single-atoms (SAs) as their active sites, are noted for their unparalleled atomic efficiency, precisely defined active sites, and superior photocatalytic performance. The synergy between MOFs and SAs in photocatalytic systems is meticulously examined, highlighting how they collectively enhance photocatalytic efficiency. This review examines SAC@MOF development and applications in environmental and energy sectors, focusing on synthesis and stabilization methods for SACs on MOFs and also characterization techniques vital for understanding these catalysts. The potential of SAC@MOF in CO2 Photoreduction and Photocatalytic H2 evolution is highlighted, emphasizing its role in green energy technologies and advances in materials science and Photocatalysis.

Determining Chemical Microheterogeneity from the Analysis of Absorption and Luminescence Transient Signals

The characterization of chemical microheterogeneity is compelling due to its relevant role in soft materials, high-entropy materials, and systems chemistry, to cite just a few instances. This work investigates the microheterogeneity of photochromic samples and metal oxide solid solutions by fitting time-resolved absorption and luminesce signals recorded after photoexcitation. The transient spectroscopic signals have been analyzed using polyexponential functions determined through the Maximum Entropy Method (MEM) and discrete exponential, Kohlrausch, and Becquerel functions through the Levenberg-Marquardt algorithm. The outputs of the different fitting functions and algorithms are compared and exploited to characterize chemical microheterogeneity quantitatively. The practical relevance of chemical microheterogeneity is supported by the demonstration that photochromic samples are transformed from binary to multistate systems, capable of encoding much more information, and that microheterogeneous photocatalysts are provided with several structural defects that guarantee the coexistence of many active sites and higher catalytic activity.

Catalytic conversion of carbon dioxide (CO2) using coal-based nano-carbon materials

Carbon dioxide (CO2) is a prominent greenhouse gas and a widely available carbon resource. The chemical conversion of CO2 into high-value chemicals and fuels is a significant approach for mitigating carbon emissions and attaining carbon neutrality. However, enhancing CO2 adsorption and conversion rates remains a primary challenge in CO2 recycling. The development of high-performance catalysts is pivotal for the catalytic conversion of CO2. In this context, coal-based carbon materials, characterized by their extensive specific surface area and adaptable chemical composition, can offer more reactive active sites and have robust CO2 adsorption capabilities. They can function as either standalone catalysts or as components of composite catalysts, making them promising materials for CO2 reduction. The use of affordable and abundant coal as a precursor for carbon materials represents a crucial avenue for achieving clean and efficient coal utilization. This paper reviews the progress of research on coal-based carbon materials and examines their advantages and challenges as catalysts for CO2 reduction.

CZTS (Cu2ZnSnS4)-based Nanomaterials in Photocatalytic and Hydrogen Production Applications: A Recent Progress towards Sustainable Environment

A variety of unique compounds have been examined to accommodate the current demand for useful multi-functional nanomaterials, copper-based quaternary CZTS semiconductors are one of them. Due to their special characteristic features like non-toxicity, cheap, and abundance, they have been recommended in recent literature for various applications. Apart from individual CZTS, different hetero-structures have also been prepared with different compounds which is well discussed and elaborated in this article. Additionally, their preparation methods, properties, and application viability have also been discussed comprehensively. The application of CZTS such as photocatalytic dye degradation and hydrogen evolution reaction has been elaborated on in this article identifying their benefits and challenges to give readers a thorough visualization. Apart from that, challenges reported in studies, a few approaches are also mentioned to possibly counter them.

Synthesis of Ag/CuS doped mineral magnetite nanocomposite with improved photocatalytic activity against tetracycline and diclofenac pollutants

The contamination of water sources by pharmaceutical pollutants presents significant environmental and health hazards, making the development of effective photocatalytic materials crucial for their removal. This research focuses on the synthesis of a novel Ag/CuS/Fe₃O₄ nanocomposite and its photocatalytic efficiency against tetracycline (TC) and diclofenac contaminants. The nanocomposite was created through a straightforward and scalable precipitation method, integrating silver nanoparticles (AgNPs) and copper sulfide (CuS) into a magnetite framework. Various analytical techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR),ultraviolet-visible spectrophotometry (UV-Vis) and energy-dispersive X-ray spectroscopy (EDS), were employed to characterize the structural and morphological properties of the synthesized material. The photocatalytic activity was tested by degrading tetracycline and diclofenac under visible light. Results indicated a marked improvement in the photocatalytic performance of the Ag/CuS/Fe₃O₄ nanocomposite (98%photodegradation of TC 60 ppm in 30 min) compared to both pure magnetite and CuS/Fe₃O₄. The enhanced photocatalytic efficiency is attributed to the synergistic interaction between AgNPs, CuS, and Fe3O4, which improves light absorption and charge separation, thereby increasing the generation of reactive oxygen species (ROS) and promoting the degradation of the pollutants. The rate constant k of photodegradation was about 0.1 min-1 for catalyst dosages 0.02 g. Also the effect of photocatalyst dose and concentration of TC and pH of solution was tested. The modified photocatalyst was also used for simultaneous photodegradation of TC and diclofenac successfully. This study highlights the potential of the Ag/CuS/Fe₃O₄ nanocomposite as an efficient and reusable photocatalyst for eliminating pharmaceutical pollutants from water.

Pore walls as high-way for efficient bulk charge transfer in porous SrTiO3 single crystals boosting photocatalytic overall water splitting

Suppressing carrier recombination in bulk and facilitating carrier transfer to surface via rational structure design is of great significance to improve solar-to-H2 conversion efficiency. We demonstrate a facile hydrothermal method to synthesize porous SrTiO3 single crystals (SrTiO3-P) with exposed (001) facets by introducing carbon spheres as templates. The obviously increased surface photovoltage and photocurrent response indicate that the interconnected pore walls act as enormous charge transfer "highways", accelerating carrier transport from bulk to surface. Furthermore, the absence of grain boundaries and high crystallinity could also lower the carrier recombination rate. Thus, the SrTiO3-P photocatalyst loaded with Rh/Cr2O3 as cocatalyst exhibits 1.5 times higher overall water splitting activity than that of solid SrTiO3, with gas evolution rate of 19.99 μmol h-1 50 mg-1 for H2 and 11.37 μmol h-1 50 mg-1 for O2. Additionally, SrTiO3-P also shows superior stability without any decay during cycling testing. This work provides a new insight into designing efficient multicomponent photocatalysts with a single-crystal porous structure.

Positive and Negative Impacts of Interfacial Hydrogen Bonds on Photocatalytic Hydrogen Evolution

Understanding the behavior of water molecules at solid-liquid interfaces is crucial for various applications such as photocatalytic water splitting, a key technology for sustainable fuel production and chemical transformations. Despite extensive studies conducted in the past, the impact of the microscopic structure of interfacial water molecules on photocatalytic reactivity has not been directly examined. In this study, using real-time mass spectrometry and Fourier-transform infrared spectroscopy, we demonstrated the crucial role of hydrogen bond (H-bond) networks on the photocatalytic hydrogen evolution in thickness-controlled water adsorption layers on various TiO2 photocatalysts. Under controlled water vapor environments with relative humidity (RH) below 70%, we observed a monotonic increase in the H2 formation rate with increasing RH, indicating that reactive water molecules were present not only in the first adsorbed layer but also in several overlying layers. In contrast, at RH > 70%, when more than three water layers covered the catalyst surface, the H2 formation rate turned to decrease dramatically because of the structural rearrangement and hardening of the interfacial H-bond network induced during further water adsorption. This unique many-body effect of interfacial water was consistently observed for various TiO2 particles with different crystalline structures, including brookite, anatase, and a mixture of anatase and rutile. Our results demonstrated that depositing several water layers in a water vapor environment with RH ∼ 70% is optimal for photocatalytic hydrogen evolution rather than liquid-phase reaction conditions in aqueous solutions. This study provides molecular-level insights into designing interfacial water conditions to enhance photocatalytic performance.

Defect Engineering Centrosymmetric 2D Material Flexocatalysts

In this study, the flexoelectric characteristics of 2D TiO2 nanosheets are examined. The theoretical calculations and experimental results reveal an excellent strain-induced flexoelectric potential (flexopotential) by an effective defect engineering strategy, which suppresses the recombination of electron-hole pairs, thus substantially improving the catalytic activity of the TiO2 nanosheets in the degradation of Rhodamine B dye and the hydrogen evolution reaction in a dark environment. The results indicate that strain-induced bandgap reduction enhances the catalytic activity of the TiO2 nanosheets. In addition, the TiO2 nanosheets degraded Rhodamine B, with kobs being ≈1.5 × 10-2 min-1 in dark, while TiO2 nanoparticles show only an adsorption effect. 2D TiO2 nanosheets achieve a hydrogen production rate of 137.9 µmol g-1 h-1 under a dark environment, 197% higher than those of TiO2 nanoparticles (70.1 µmol g-1 h-1). The flexopotential of the TiO2 nanosheets is enhanced by increasing the bending moment, with excellent flexopotential along the y-axis. Density functional theory is used to identify the stress-induced bandgap reduction and oxygen vacancy formation, which results in the self-dissociation of H2O on the surface of the TiO in the dark. The present findings provide novel insights into the role of TiO2 flexocatalysis in electrochemical reactions.

An All-In-One Integrating Strategy for Designing Platinum(II)-Based Supramolecular Polymers for Photocatalytic Hydrogen Evolution

Organic polymer photocatalysts have achieved significant progress in photocatalytic hydrogen evolution, while developing the integrated organic polymers possessing the functions of photosensitizer, electron transfer mediator, and catalyst simultaneously is urgently needed and presents a great challenge. Considering that chalcogenoviologens are able to act as photosensitizers and electron-transfer mediators, a series of chalcogenoviologen-containing platinum(II)-based supramolecular polymers is designed, which exhibited strong visible light-absorbing ability and suitable bandgap for highly efficient photocatalytic hydrogen evolution without the use of a cocatalyst. The hydrogen evolution rate (HER) increases steadily with the decrease in an optical gap of the polymer. Among these "all-in-one" polymers, Se-containing 2D porous polymer exhibited the best photocatalytic performance with a HER of 3.09 mmol g-1 h-1 under visible light (>420 nm) irradiation. Experimental and theoretical calculations reveal that the distinct intramolecular charge transfer characteristics and heteroatom N in terpyridine unit promote charge separation and transfer within the molecules. This work could provide new insights into the design of metallo-supramolecular polymers with finely tuned components for photocatalytic hydrogen evolution from water.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

Dimensionally Intact Construction of Ultrathin S-Scheme CuFe2O4/ZnIn2S4 Heterojunctional Photocatalysts for CO2 Photoreduction

The conversion of CO2 into carbon-neutral fuels such as methane (CH4) through selective photoreduction is highly sought after yet remains challenging due to the slow multistep proton-electron transfer processes and the formation of various C1 intermediates. This research highlights the cooperative interaction between Fe3+ and Cu2+ ions transitioning to Fe2+ and Cu+ ions, enhancing the photocatalytic conversion of CO2 to methane. We introduce an S-scheme heterojunction photocatalyst, CuFe2O4/ZnIn2S4, which demonstrates significant efficiency in CO2 methanation under light irradiation. The CuFe2O4/ZnIn2S4 heterojunction forms an internal electric field that aids in the mobility and separation of exciton carriers under a wide solar spectrum for exceptional photocatalytic performance. Remarkably, the optimal CuFe2O4/ZnIn2S4 heterojunction system achieved an approximately 68-time increase in CO2 conversion compared with ZnIn2S4 and CuFe2O4 nanoparticles using only pure water, with nearly complete CO selectivity and yields of CH4 and CO reaching 172.5 and 202.4 μmol g-1 h-1, respectively, via a 2-electron oxygen reduction reaction (ORR) process. The optimally designed CuFe2O4/ZnIn2S4 heterojunctional system achieved approximately 96% conversion of BA and 98.5% selectivity toward benzaldehyde (BAD). Additionally, this photocatalytic system demonstrated excellent cyclic stability and practical applicability. The photogenerated electrons in the CuFe2O4 conduction band enhance the reduction of Fe3+/Cu2+ to Fe2+/Cu+, creating a microenvironment conducive to CO2 reduction to CO and CH4. Simultaneously, the appearance of holes in the ZnIn2S4 valence band facilitates water oxidation to O2. The synergistic function within the CuFe2O4/ZnIn2S4 heterojunction plays a pivotal role in facilitating charge transfer, accelerating water oxidation, and thereby enhancing CO2 reduction kinetics. This study offers valuable insights and a strategic framework for designing efficient S-scheme heterojunctions aimed at achieving carbon neutrality through solar fuel production.

Visible light driven (VLD) reduced TiO2-x nanocatalysts designed by inorganic and organic reducing agent-mediated solvothermal methods for electrocatalytic and photocatalytic applications

This work presents a comparative study on the structural, optical and electrochemical characteristics of visible light driven (VLD) reduced titanium dioxide (TiO2-x ) nanocatalysts synthesized via inorganic and organic synthetic routes. X-ray diffraction (XRD) patterns, Raman spectra and X-ray absorption fine structure (XAFS) analyses reflected anatase phase titania. Whereas, the quantitative EXAFS fit and XANES analysis revealed structural distortion due to the presence of oxygen and titanium vacancies with low valent Ti states in anatase lattices of certain nanocatalysts, which subsequently leads to better electrochemical and photocatalytic activities. Moreover, owing to the large surface area and mesoporous structures, the Mg-TiO2-x nanocatalysts exhibited enhanced water adsorption and ultimately increased overall water splitting with an OER overpotential equal to 420 mV vs. RHE at a current density of 10 mA cm-2 (Tafel slope = 62 mV dec-1), extended visible light absorbance, decreased photoluminescence (PL) intensity and increased carrier lifetime in comparison with commercial titania.

Modeling and admittance recursive simulation of anti-reflective coatings for photothermal conversion: synergy between subwavelength structures and gradient refractive index layers

In the field of photothermal conversion, light-absorbing layers show limitations such as low solar energy utilization and excessive surface reflection. This paper proposes a new anti-reflective coating consisting of a gradient-doped fluorescent glass film covering a subwavelength structural layer for photothermal conversion. Its transmittance was simulated using equivalent medium theory and the admittance recursion method. The subwavelength structure provides a refractive index gradient, and its shape solves the problem of the sharp decrease in transmittance at high angles of incidence. Subsequently, we adjust the material parameters of the gradient refractive layers and control the thickness of each layer to minimize interlayer Fresnel reflections. Finally, the efficient light-trapping ability of the model was verified by calculating and comparing the transmittances of the optimized model and bare glass. Notably, within the visible spectrum, our model achieves an average transmittance of over 95% across wavelength and angle ranges, effectively suppressing surface reflections. At a larger light incident angle, the transmittance increases by 29.7%, and the minimum angle transmittance reaches 92.7%. This study proposes an innovative method to enhance the performance of transmission layers in photothermal conversion devices.

A review on carbon quantum dot/semiconductor-based nanocomposites as hydrogen production photocatalysts

Carbon quantum dots (CQDs) are discrete, quasi-spherical carbon nanoparticles with sizes below 10 nm. The properties of CQDs can be further enhanced by doping with elements such as nitrogen, phosphorous, sulphur, and boron or co-doping with heteroatoms such as nitrogen-phosphorous, nitrogen-sulphur, and nitrogen-boron. These excellent properties of CQDs can be utilized to enhance the photocatalytic performance of semiconductors. Therefore, in this review, we summarize different types of bare CQD-scaffolded semiconductors, both doped and co-doped, used for photocatalytic hydrogen production. Moreover, the detailed photocatalytic mechanism of CQD/semiconductor-based hydrogen production is reviewed. Recent progress in the design and development of CQD-based photocatalysts, along with the challenges involved, is comprehensively reviewed.

Protecting TiS3 Photoanodes for Water Splitting in Alkaline Media by TiO2 Coatings

Titanium trisulfide (TiS3) nanoribbons, when coated with titanium dioxide (TiO2), can be used for water splitting in the KOH electrolyte. TiO2 shells can be prepared through thermal annealing to regulate the response of TiS3/TiO2 heterostructures by controlling the oxidation time and growth atmosphere. The thickness and structure of the TiO2 layers significantly influence the photoelectrocatalytic properties of the TiS3/TiO2 photoanodes, with amorphous layers showing better performance than crystalline ones. The oxide layers should be thin enough to transfer photogenerated charge through the electrode-electrolyte interface while protecting TiS3 from KOH corrosion. Finally, the performance of TiS3/TiO2 heterostructures has been improved by coating them with various electrocatalysts, NiSx being the most effective. This research presents new opportunities to create efficient semiconductor heterostructures to be used as photoanodes in corrosive alkaline aqueous solutions.

A triazine-based covalent organic framework decorated with cadmium sulfide for efficient photocatalytic hydrogen evolution from water

Construction of inorganic/organic heterostructures has been proven to be a very promising strategy to design highly efficient photocatalysts for solar driven hydrogen evolution from water. Herein, we report the preparation of a direct Z-scheme heterojunction photocatalyst by in situ growth of cadmium sulfide on a triazine-based covalent organic framework (COF). The triazine based-COF was synthesized by condensation reaction of precursors 1,3,5-tris-(4-formyl-phenyl) triazine (TFPT) and 2,5-bis-(3-hydroxypropoxy) terephthalohydrazide (DHTH), termed as TFPT-DHTH-COF. Widely distributed nitrogen atoms throughout TFPT-DHTH-COF skeletons serve as anchoring sites for strong interfacial interactions with CdS. The CdS/TFPT-DHTH-COF composite showed a hydrogen evolution rate of 15.75 mmol h-1 g-1, which is about 75 times higher than that of TFPT-DHTH-COF (0.21 mmol h-1 g-1) and 3.4 times higher than that of CdS (4.57 mmol h-1 g-1). With the properly staggered band alignment and strong interfacial interaction between TFPT-DHTH-COF and CdS, a Z-scheme charge transfer pathway is achieved. The mechanism has been systematically analyzed by steady state and time-resolved photoluminescence measurements as well as in situ irradiated X-ray photoelectron spectroscopy.

Elucidating Facet-Dependent Photocatalytic Activities of Metastable CdS and Au@CdS Core-Shell Nanocrystals

Controlling the crystal facets of semiconductor nanocrystals (NCs) has been proven as an effective approach to tune their physicochemical properties. However, the study on facet-engineering of metastable zinc blende CdS (zb-CdS) and its heterostructures is still not fully explored. In this study, the zb-CdS and Au@zb-CdS core-shell NCs with tunable terminating facets are controllably synthesized, and their photocatalytic performance for water splitting are evaluated. It is found that the {111} facets of the zb-CdS NCs display higher intrinsic activity than the {100} counterparts, which originates from these surfaces being much more efficient, facilitating electron transition to enhance the adsorption ability and the dissociation of the adsorbed water, as revealed by theoretical calculations. Moreover, the Au@zb-CdS core-shell NCs exhibit better photocatalytic performance than the zb-CdS NCs terminated with the same facets under visible light irradiation (≥400 nm), which is mainly ascribed to the accelerated electron separation at the interface, as demonstrated by femtosecond transient absorption (fs-TA) spectroscopy. Importantly, the quantum yield of plasmon-induced hot electron transfer quantified by fs-TA in the Au@zb-CdS core-shell octahedrons can be reached as high as 1.2% under 615 nm excitation, which is higher than that of the Au@zb-CdS core-shell cubes. This work unravels the face-dependent photocatalytic performance of the metastable semiconductor NCs via a combination of experiments and theoretical calculations, providing the understanding of the underlying mechanism of these photocatalysts.

Solar overall water-splitting by a spin-hybrid all-organic semiconductor

Direct solar-to-hydrogen conversion from pure water using all-organic heterogeneous catalysts remains elusive. The challenges are twofold: (i) full-band low-frequent photons in the solar spectrum cannot be harnessed into a unified S1 excited state for water-splitting based on the common Kasha-allowed S0 → S1 excitation; (ii) the H+ → H2 evolution suffers the high overpotential on pristine organic surfaces. Here, we report an organic molecular crystal nanobelt through the self-assembly of spin-one open-shell perylene diimide diradical anions (:PDI2-) and their tautomeric spin-zero closed-shell quinoid isomers (PDI2-). The self-assembled :PDI2-/PDI2- crystal nanobelt alters the spin-dependent excitation evolution, leading to spin-allowed S0S1 → 1(TT) → T1 + T1 singlet fission under visible-light (420 nm~700 nm) and a spin-forbidden S0 → T1 transition under near-infrared (700 nm~1100 nm) within spin-hybrid chromophores. With a triplet-triplet annihilation upconversion, a newly formed S1 excited state on the diradical-quinoid hybrid induces the H+ reduction through a favorable hydrophilic diradical-mediated electron transfer, which enables simultaneous H2 and O2 production from pure water with an average apparent quantum yield over 1.5% under the visible to near-infrared solar spectrum.

Efficient Visible Light Photocatalytic Hydrogen Evolution by Boosting the Interfacial Electron Transfer in Mesoporous Mott-Schottky Heterojunctions of Co2P-Modified CdIn2S4 Nanocrystals

Photocatalytic water splitting for hydrogen generation is an appealing means of sustainable solar energy storage. In the past few years, mesoporous semiconductors have been at the forefront of investigations in low-cost chemical fuel production and energy conversion technologies. Mesoporosity combined with the tunable electronic properties of semiconducting nanocrystals offers the desired large accessible surface and electronic connectivity throughout the framework, thus enhancing photocatalytic activity. In this work, we present the construction of rationally designed 3D mesoporous networks of Co2P-modified CdIn2S4 nanoscale crystals (ca. 5-6 nm in size) through an effective soft-templating synthetic route and demonstrate their impressive performance for visible-light-irradiated catalytic hydrogen production. Spectroscopic characterizations combined with electrochemical studies unravel the multipathway electron transfer dynamics across the interface of Co2P/CdIn2S4 Mott-Schottky nanoheterojunctions and shed light on their impact on the photocatalytic hydrogen evolution chemistry. The strong Mott-Schottky interaction occurring at the heterointerface can regulate the charge transport toward greatly improved hydrogen evolution performance. The hybrid catalyst with 10 wt % Co2P content unveils a H2 evolution rate of 20.9 mmol gcat -1 h-1 under visible light irradiation with an apparent quantum efficiency (AQE) up to 56.1% at 420 nm, which is among the highest reported activities. The understanding of interfacial charge-transfer mechanism could provide valuable insights into the rational development of highly efficient catalysts for clean energy applications.

Nickel-Doped Decatungstate as a Robust Photocatalyst for Violet Light-Triggered Redox Coupling Conversion of Alcohol and Water to Aldehyde/Ketone and Hydrogen

The effective coupling of photoinduced alcohol oxidation and water reduction may economically produce hydrogen (H2) from water, which is of great significance in solving the current energy crisis. This study discloses that decatungstate (DT) and especially Ni2+ions-doped DTs are active for the photoreaction of benzyl alcohol with H2O, and under 48 h of violet light illumination, the best 1%Ni-DT yields ca. 86.1% benzoic acid and a 4.65 h-1 H2 generation efficiency (turnover frequency, TOF). Also, 1%Ni-DT is efficient for the photoredox coupling reaction of aliphatic and especially aromatic primary/secondary alcohols with water. A series of characterizations support that the doubled-reduced H2DT produced from the photoreaction plays a key role in water reduction to H2, which is accelerated by the doped Ni2+. In particular, it and the derived Ni3+ may construct a Z-type catalyst for water overall splitting, thereby hoisting the acid yield and H2 amount in the later stage of the photoreaction.

Stability and degradation of (oxy)nitride photocatalysts for solar water splitting

Advancing towards alternative technologies for the sustainable production of hydrogen is a necessity for the successful integration of this potentially green fuel in the future. Photocatalytic and photoelectrochemical water splitting are promising concepts in this context. Over the past decades, researchers have successfully explored several materials classes, such as oxides, nitrides, and oxynitrides, in their quest for suitable photocatalysts with a focus on reaching higher efficiencies. However, to pave the way towards practicability, understanding degradation processes and reaching stability is essential, a domain where research has been scarcer. This perspective aims at providing an overview on recent progress concerning stability and degradation with a focus on (oxy)nitride photocatalysts and at providing insights into the opportunities and challenges coming along with the investigation of degradation processes and the attempts to improve the stability of photocatalysts.

Charge redistribution of a spatially differentiated ferroelectric Bi4Ti3O12 single crystal for photocatalytic overall water splitting

Artificial photosynthesis is a promising approach to produce clean fuels via renewable solar energy. However, it is practically constrained by two issues of slow photogenerated carrier migration and rapid electron/hole recombination. It is also a challenge to achieve a 2:1 ratio of H2 and O2 for overall water splitting. Here we report a rational design of spatially differentiated two-dimensional Bi4Ti3O12 nanosheets to enhance overall water splitting. Such a spatially differentiated structure overcomes the limitation of charge transfer across different crystal planes in a single crystal semiconductor. The experimental results show a redistribution of charge within a crystal plane. The resulting photocatalyst produces 40.3 μmol h-1 of hydrogen and 20.1 μmol h-1 of oxygen at a near stoichiometric ratio of 2:1 and a solar-to-hydrogen efficiency of 0.1% under simulated solar light.

Stable and Highly Active Single Atom Configurations for Photocatalytic H2 Generation

The employment of single atoms (SAs), especially Pt SAs, as co-catalysts in photocatalytic H2 generation has gained significant attention due to their exceptional efficiency. However, a major challenge in their application is the light-induced agglomeration of these SAs into less active nanosized particles under photocatalytic conditions. This study addresses the stability and reactivity of Pt SAs on TiO2 surfaces by investigating various post-deposition annealing treatments in air, Ar, and Ar-H2 environments at different temperatures. It is described that annealing in an Ar-H2 atmosphere optimally stabilizes SA configurations, forming stable 2D rafts of assembled SAs ≈0.5-1 nm in diameter. These rafts not only resist light-induced agglomeration but also exhibit significantly enhanced H2 production efficiency. The findings reveal a promising approach to maintaining the high reactivity of Pt SAs while overcoming the critical challenge of their stability under photocatalytic conditions.

Aqueous Titania Interfaces

Water-metal oxide interfaces are central to many phenomena and applications, ranging from material corrosion and dissolution to photoelectrochemistry and bioengineering. In particular, the discovery of photocatalytic water splitting on TiO2 has motivated intensive studies of water-TiO2 interfaces for decades. So far, a broad understanding of the interaction of water vapor with several TiO2 surfaces has been obtained. However, much less is known about liquid water-TiO2 interfaces, which are more relevant to many practical applications. Probing these complex systems at the molecular level is experimentally challenging and is sometimes possible only through computational studies. This review summarizes recent advances in the atomistic understanding, mostly through computational simulations, of the structure and dynamics of interfacial water on TiO2 surfaces. The main focus is on the nature, molecular or dissociated, of water in direct contact with low-index defect-free crystalline surfaces. The hydroxyls resulting from water dissociation are essential in the photooxidation of water and critically affect the surface chemistry of TiO2.

Vertical Dipole Dominates Charge Carrier Lifetime in Monolayer Janus MoSSe

Two-dimensional semiconductor materials with vertical dipoles are promising photocatalysts as vertical dipoles not only promote the electron-hole separation but also enhance the carrier redox ability. However, the influence of vertical dipoles on carrier recombination in such materials, especially the competing relationship between vertical dipoles and band gaps, is not yet clear. Herein, first-principles calculations and nonadiabatic molecular dynamics simulations were combined to clarify the influence of band gap and vertical dipole on the carrier lifetime in Janus MoSSe monolayer. By comparing with the results of MoS2 and MoSe2 as well as exploring the carrier lifetime of MoSSe under strain regulation, it has been demonstrated that the vertical dipole, rather than the band gap, is the dominant factor affecting the carrier lifetime. Strikingly, a linear relationship between the carrier lifetime and vertical dipole is revealed. These findings have important implications for the design of high-performance photocatalysts and optoelectronic devices.

Conjugated Polymer/Recombinant Escherichia coli Biohybrid Systems for Photobiocatalytic Hydrogen Production

Biohybrid photocatalysts are composite materials that combine the efficient light-absorbing properties of synthetic materials with the highly evolved metabolic pathways and self-repair mechanisms of biological systems. Here, we show the potential of conjugated polymers as photosensitizers in biohybrid systems by combining a series of polymer nanoparticles with engineered Escherichia coli cells. Under simulated solar light irradiation, the biohybrid system consisting of fluorene/dibenzo [b,d]thiophene sulfone copolymer (LP41) and recombinant E. coli (i.e., a LP41/HydA BL21 biohybrid) shows a sacrificial hydrogen evolution rate of 3.442 mmol g-1 h-1 (normalized to polymer amount). It is over 30 times higher than the polymer photocatalyst alone (0.105 mmol g-1 h-1), while no detectable hydrogen was generated from the E. coli cells alone, demonstrating the strong synergy between the polymer nanoparticles and bacterial cells. The differences in the physical interactions between synthetic materials and microorganisms, as well as redox energy level alignment, elucidate the trends in photochemical activity. Our results suggest that organic semiconductors may offer advantages, such as solution processability, low toxicity, and more tunable surface interactions with the biological components over inorganic materials.

A critical mini-review on doping and heterojunction formation in ZnO-based catalysts

This mini-review on doping and heterojunctions for catalysis applications provides a comprehensive overview of key aspects. Doping, when carried out adequately with a uniform distribution, creates a new energy level that significantly enhances charge transfer and light absorption. This new level alters the material's morphology and enhances intrinsic defects. For instance, ZnO, despite its exceptional band edge concerning oxygen reduction and water oxidation redox potentials, faces the issue of electron-hole recombination. However, forming a heterojunction can effectively aid charge transfer and prolong electron-hole relaxation without recombination. This is where the role of doping and heterojunctions becomes crucial. Additionally, incorporating noble metals with S- and Z-scheme heterojunctions offers a promising mechanism for charge transfer and visible light harvesting, further amplifying the catalytic properties.

2D MoB MBene: An Efficient Co-Catalyst for Photocatalytic Hydrogen Production under Visible Light

Highly active and low-cost co-catalysts have a positive effect on the enhancement of solar H2 production. Here, we employ two-dimensional (2D) MBene as a noble-metal-free co-catalyst to boost semiconductor for photocatalytic H2 production. MoB MBene is a 2D nanoboride, which is directly made from MoAlB by a facile hydrothermal etching and manual scraping off process. The as-synthesized MoB MBene with purity >95 wt % is treated by ultrasonic cell pulverization to obtain ultrathin 2D MoB MBene nanosheets (∼0.61 nm) and integrated with CdS via an electrostatic interaction strategy. The CdS/MoB composites exhibit an ultrahigh photocatalytic H2 production activity of 16,892 μmol g-1 h-1 under visible light, surpassing that of pure CdS by an exciting factor of ≈1135%. Theoretical calculations and various measurements account for the high performance in terms of Gibbs free energy, work functions, and photoelectrochemical properties. This work discovers the huge potential of these promising 2D MBene family materials as high-efficiency and low-cost co-catalysts for photocatalytic H2 production.

Critical learning from industrial catalysis for nanocatalytic medicine

Systematical and critical learning from industrial catalysis will bring inspiration for emerging nanocatalytic medicine, but the relevant knowledge is quite limited so far. In this review, we briefly summarize representative catalytic reactions and corresponding catalysts in industry, and then distinguish the similarities and differences in catalytic reactions between industrial and medical applications in support of critical learning, deep understanding, and rational designing of appropriate catalysts and catalytic reactions for various medical applications. Finally, we summarize/outlook the present and potential translation from industrial catalysis to nanocatalytic medicine. This review is expected to display a clear picture of nanocatalytic medicine evolution.

Charge Transfer from Quantum-Confined 0D, 1D, and 2D Nanocrystals

The properties of colloidal quantum-confined semiconductor nanocrystals (NCs), including zero-dimensional (0D) quantum dots, 1D nanorods, 2D nanoplatelets, and their heterostructures, can be tuned through their size, dimensionality, and material composition. In their photovoltaic and photocatalytic applications, a key step is to generate spatially separated and long-lived electrons and holes by interfacial charge transfer. These charge transfer properties have been extensively studied recently, which is the subject of this Review. The Review starts with a summary of the electronic structure and optical properties of 0D-2D nanocrystals, followed by the advances in wave function engineering, a novel way to control the spatial distribution of electrons and holes, through their size, dimension, and composition. It discusses the dependence of NC charge transfer on various parameters and the development of the Auger-assisted charge transfer model. Recent advances in understanding multiple exciton generation, decay, and dissociation are also discussed, with an emphasis on multiple carrier transfer. Finally, the applications of nanocrystal-based systems for photocatalysis are reviewed, focusing on the photodriven charge separation and recombination processes that dictate the function and performance of these materials. The Review ends with a summary and outlook of key remaining challenges and promising future directions in the field.

Approaches for Enhancing Wastewater Treatment of Photocatalytic Fuel Cells: A Review

Environmental pollution and energy crises have garnered global attention. The substantial discharge of organic waste into water bodies has led to profound environmental contamination. Photocatalytic fuel cells (PFCs) enabling the simultaneous removal of refractory contaminants and recovery of the chemical energy contained in organic pollutants provides a potential strategy to solve environmental issues and the energy crisis. This review will discuss the fundamentals, working principle, and configuration development of PFCs and photocatalytic microbial fuel cells (PMFCs). We particularly focus on the strategies for improving the wastewater treatment performance of PFCs/PMFCs in terms of coupled advanced oxidation processes, the rational design of high-efficiency electrodes, and the strengthening of the mass transfer process. The significant potential of PFCs/PMFCs in various fields is further discussed in detail. This review is intended to provide some guidance for the better implementation and widespread adoption of PFC wastewater treatment technologies.

ML-Aided Computational Screening of 2D Materials for Photocatalytic Water Splitting

The exploration of two-dimensional (2D) materials with exceptional physical and chemical properties is essential for the advancement of solar water splitting technologies. However, the discovery of 2D materials is currently heavily reliant on fragmented studies with limited opportunities for fine-tuning the chemical composition and electronic features of compounds. Starting from the V2DB digital library as a resource of 2D materials, we set up and execute a funnel approach that incorporates multiple screening steps to uncover potential candidates for photocatalytic water splitting. The initial screening step is based upon machine learning (ML) predicted properties, and subsequent steps involve first-principles modeling of increasing complexity, going from density functional theory (DFT) to hybrid-DFT to GW calculations. Ensuring that at each stage more complex calculations are only applied to the most promising candidates, our study introduces an effective screening methodology that may serve as a model for accelerating 2D materials discovery within a large chemical space. Our screening process yields a selection of 11 promising 2D photocatalysts.

Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO2. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO2 into solid materials, achieving negative carbon emissions. Hydrothermal carbonization (HTC) presents an attractive method for converting biomass into carbon materials, by which biomass can be transformed into materials with favorable properties in a distinct hydrothermal environment, and these carbon materials have made extensive progress in many fields. However, the HTC of biomass is a complex and interdisciplinary problem, involving simultaneously the physical properties of the underlying biomass and sub/supercritical water, the chemical mechanisms of hydrothermal synthesis, diverse applications of resulting carbon materials, and the sustainability of the entire technological routes. This review starts with the analysis of biomass composition and distinctive characteristics of the hydrothermal environment. Then, the factors influencing the HTC of biomass, the reaction mechanism, and the properties of resulting carbon materials are discussed in depth, especially the different formation mechanisms of primary and secondary hydrochars. Furthermore, the application and sustainability of biomass-derived carbon materials are summarized, and some insights into future directions are provided.

A review on transition metal oxides based photocatalysts for degradation of synthetic organic pollutants

This review provides insight into the current research trend in transition metal oxides (TMOs)-based photocatalysis in removing the organic colouring matters from water. For easy understanding, the research progress has been presented in four generations according to the catalyst composition and mode of application, viz: single component TMOs (the first-generation), doped TMOs/binary TMOs/doped binary TMOs (the second-generation), inactive/active support-immobilized TMOs (the third-generation), and ternary/quaternary compositions (the fourth-generation). The first two generations represent suspended catalysts, the third generation is supported catalysts, and the fourth generation can be suspended or supported. The review provides an elaborated comparison between suspended and supported catalysts, their general/specific requirements, key factors controlling degradation, and the methodologies for performance evaluation. All the plausible fundamental and advanced dye degradation mechanisms involved in each generation of catalysts were demonstrated. The existing challenges in TMOs-based photocatalysis and how the researchers approach the hitch to resolve it effectively are discussed. Future research trends are also presented.

Achieving water-floatable photocatalyst on recycled bamboo chopsticks

Disposable bamboo chopsticks (DBCs) are difficult to recycle, which inevitably cause secondary pollution. Based on energy and environmental issues, we propose a facile strategy to fabricate floatable photocatalyst (fPC) coated onto DBCs, which can be flexibly used in water purification. The photocatalyst of titania and titanium carbide on bamboo (TiO2/TiC@b) was successfully constructed from TiC-Ti powders and DBCs using a coating technique followed heat treatment in carbon powder, and the fPC exhibited excellent photocatalytic activity under visible light irradation. The analysis results indicate that rutile TiO2 forms on TiC during heat treatment, achieving a low-density material with an average value of approximately 0.5233 g/cm3. The coatings of TiO2/TiC on the bamboo are firm and uniform, with a particle size of about 20-50 nm. XPS results show that a large amount of oxygen vacancies is generated, due to the reaction atmosphere of more carbon and less oxygen, further favoring to narrowing the band gap of TiO2. Furthermore, TiO2 formed on residual TiC would induce the formation of a heterojunction, which effectively inhibits the photogenerated electron-hole recombination via the charge transfer effect. Notably, the degradation of dye Rhodamine B (Rh.B) is 62.4% within 3 h, while a previous adsorption of 36.0% for 1 h. The excellent photocatalytic performance of TiO2/TiC@b can be attributed to the enhanced reaction at the water/air interface due to the reduced light loss in water, improved visible-light response, increased accessible area and charge transfer effect. Our findings show that the proposed strategy achieves a simple, low-cost, and mass-producible method to fabricate fPC onto the used DBCs, which is expected to applied in multiple fields, especially in waste recycling and water treatment.

Constructing a P2W18O626--Containing Hybrid Photocatalyst via Noncovalent Interactions for Enhanced H2 Production

Polyoxometalates (POMs) have gained significant research attention because of their excellent properties in photocatalytic (PC) hydrogen production. Exploring POM-based compounds for heterogeneous photocatalysis is an ongoing task. Here, we obtain a water-insoluble inorganic-organic hybrid compound, (P2W18O62)3(C12N3H10)6(C12N3H11)6·9.5H2O (P-PW), formed by Dawson-type POM P2W18O626- (P2W18) anions and protonated 2-(pyridin-4-yl)-1H-benzo[d]imidazole (PHB) cations via noncovalent interactions. In the presence of the sacrificial agent triethanolamine, P-PW exhibits a PC H2 generation rate of 0.418 mmol/g/h, surpassing that of P2W18 and PHB by 15 and 17 times, respectively. This enhancement in PC performance of P-PW can be attributed to its band structure change from the precursor compounds, leading to increased light absorption and therefore more efficient PC hydrogen production.

Research progress of dual-atom site catalysts for photocatalysis

Dual-atom site catalysts (DASCs) have sparked considerable interest in heterogeneous photocatalysis as they possess the advantages of excellent photoelectronic activity, photostability, and high carrier separation efficiency and mobility. The DASCs involved in these important photocatalytic processes, especially in the photocatalytic hydrogen evolution reaction (HER), CO2 reduction reaction (CO2RR), N2/nitrate reduction, etc., have been extensively investigated in the past few years. In this review, we highlight the recent progress in DASCs that provides fundamental insights into the photocatalytic conversion of small molecules. The controllable preparation and characterization methods of various DASCs are discussed. Subsequently, the reaction mechanisms of the formation of several important molecules (hydrogen, hydrocarbons and ammonia) on DASCs are introduced in detail, in order to probe the relationship between DASCs's structure and photocatalytic activity. Finally, some challenges and outlooks of DASCs in the photocatalytic conversion of small molecules are summarized and prospected. We hope that this review can provide guidance for in-depth understanding and aid in the design of efficient DASCs for photocatalysis.