Stabilizing Cu2+ Ions by Solid Solutions to Promote CO2 Electroreduction to Methane

Visualizing Catalytic Dynamics of Single-Cu-Atom-Modified SnS2 in CO2 Electroreduction via Rapid Freeze-Quench Mössbauer Spectroscopy

Effective design and engineering of catalysts for an optimal performance depend extensively on a profound understanding of the intricate catalytic dynamics under reaction conditions. In this work, we showcase rapid freeze-quench (RFQ) Mössbauer spectroscopy as a powerful technique for quantitatively monitoring the catalytic dynamics of single-Cu-atom-modified SnS2 (Cu1/SnS2) in the electrochemical CO2 reduction reaction (CO2RR). Utilizing the newly established RFQ 119Sn Mössbauer methodology, we clearly identified the dynamic transformation of Cu1/SnS2 to Cu1/SnS and Cu1/Sn during the CO2RR, resulting in an outstanding Faradaic efficiency for formate production (∼90.9%) with a partial current density of 158 mA cm-2. Results from operando Raman spectroscopy, operando attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), quasi in situ electron microscopy, and quasi in situ X-ray photoelectron spectroscopy (XPS) measurements indicate that the anchored single Cu atom in Cu1/SnS2 can accelerate the reduction of SnS with in situ formation of Cu1/Sn under CO2RR conditions, which effectively promote the generation of *CO2-/*OCHO intermediates. Theoretical calculations further support that in situ formed Cu1/Sn works as active sites catalyzing the CO2RR, which reduces the energy barrier for the CO2 activation and formation of the *OCHO intermediate, thereby facilitating the conversion of CO2 to formate. The results of this work provide a thorough understanding of the dynamic evolution of Sn-based catalytic sites in the CO2RR and shed light for engineering single atoms with an optimized catalytic performance. We anticipate that RFQ Mössbauer spectroscopy will emerge as an advanced spectroscopic technique for enabling a genuine visualization of catalytic dynamics across various reaction systems.

Stabilization of Cuδ+ Sites Within MnO2 for Superior Urea Electro-Synthesis

Electrocatalytic C-N coupling between NO3 - and CO2 has emerged as a sustainable route for urea production. However, identifying catalytic active sites and designing efficient electrocatalysts remain significant challenges. Herein, the synthesis of Cu-doped MnO2 nanotube (denoted as Cu-MnO2) with stable Cuδ+-oxygen vacancies (Ovs)-Mn3+ dual sites is reported. Compared with pure MnO2, Cuδ+ doping can effectively enhance urea production performance in the co-reduction of CO2 and NO3 -. Thus, Cu-MnO2 catalyst exhibits a maximum Faradaic efficiency (FE) of 54.7% and the highest yield rate of 116.7 mmol h-1 gcat. -1 in a flow cell. Remarkably, the urea yield rate remains over 78 mmol h-1 gcat. -1 across a wide potential range. Further experimental and theoretical results elucidate the unique role of Cu-MnO2 solid-solution for stabilizing Cuδ+ sites in Cuδ+-Ovs-Mn3+, endowing the catalyst with superior structural and electrochemical stabilities. This thermodynamically promotes urea formation and kinetically lowers the energy barrier of C-N coupling.

Copper cluster regulated by N, B atoms for enhanced CO2 electroreduction to formate

Electrochemical CO2 conversion into formate by intermittent renewable electricity, presents a captivating prospect for both the storage of renewable electrical energy and the utilization of emitted CO2. Typically, Cu-based catalysts in CO2 reduction reactions favor the production of CO and other by-products. However, we have shifted this selectivity by incorporating B, N co-doped carbon (BNC) in the fabrication of Cu clusters. These Cu clusters are regulated with B, N atoms in a porous carbon matrix (Cu/BN-C), and Zn2+ ions were added to achieve Cu clusters with the diameter size of ∼1.0 nm. The obtained Cu/BN-C possesses a significantly improved catalytic performance in CO2 reduction to formate with a Faradaic efficiency (FE) of up to 70 % and partial current density (jformate) surpassing 20.8 mA cm-2 at -1.0 V vs RHE. The high FE and jformate are maintained over a 12-hour. The overall catalytic performance of Cu/BN-C outperforms those of the other investigated catalysts. Based on the density functional theory (DFT) calculation, the exceptional catalytic behavior is attributed to the synergistic effect between Cu clusters and N, B atoms by modulating the electronic structure and enhancing the charge transfer properties, which promoted a preferential adsorption of HCOO* over COOH*, favoring formate formation.

Hierachical Aerogel-Supported Cu-Sn-Ox Solid Solutions for Highly Selective CO2 Electroreduction and Zn-CO2 Batteries

The electrochemical CO2 reduction reaction (CO2RR) into high-value carbon compounds such as CO and HCOOH is a promising strategy for the utilization and conversion of emitted CO2. However, the selectivity of the CO2RR for HCOOH is typically less than 90% and operates within a narrow voltage range, which limits its practical application. Herein, we propose a novel heterostructural aerogel as a highly efficient electrocatalyst for CO2RR to HCOOH. This catalyst consists of Cu-Sn-Ox solid solutions embedded in a reduced graphene oxide matrix (Cu-Sn-Ox/rGO). The incorporation of Cu2+ into the SnO2 matrix enhances HCOOH production by improving the adsorption of the *OCHO intermediate and inhibiting H2 evolution, as confirmed by in situ measurements and computational studies. As a result, Cu-Sn-Ox/rGO achieves a remarkable Faradaic efficiency (FE) of up to 91.4% for HCOOH and maintains high selectivity over a broad operating voltage range (-0.8 to -1.1 V). Additionally, the assembled Zn-CO2 batteries demonstrated an excellent power density of 1.14 mW/cm2 and exceptional stability for over 25 h.

Constructing Co4(SO4)4 Clusters within Metal-Organic Frameworks for Efficient Oxygen Electrocatalysis

Multinuclear metal clusters are ideal candidates to catalyze small molecule activation reactions involving the transfer of multiple electrons. However, synthesizing active metal clusters is a big challenge. Herein, on constructing an unparalleled Co4(SO4)4 cluster within porphyrin-based metal-organic frameworks (MOFs) and the electrocatalytic features of such Co4(SO4)4 clusters for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is reported. The reaction of CoII sulfate and metal complexes of tetrakis(4-pyridyl)porphyrin under solvothermal conditions afforded Co4-M-MOFs (M═Co, Cu, and Zn). Crystallographic studies revealed that these Co4-M-MOFs have the same framework structure, having the Co4(SO4)4 clusters connected by metalloporphyrin units through Co─Npyridyl bonds. In the Co4(SO4)4 cluster, the four CoII ions are chemically and symmetrically equivalent and are each coordinated with four sulfate O atoms to give a distorted cube-like structure. Electrocatalytic studies showed that these Co4-M-MOFs are all active for electrocatalytic OER and ORR. Importantly, by regulating the activity of the metalloporphyrin units, it is confirmed that the Co4(SO4)4 cluster is active for oxygen electrocatalysis. With the use of Co porphyrins as connecting units, Co4-Co-MOF displays the highest electrocatalytic activity in this series of MOFs by showing a 10 mA cm-2 OER current density at 357 mV overpotential and an ORR half-wave potential at 0.83 V versus reversible hydrogen electrode (RHE). Theoretical studies revealed the synergistic effect of two proximal Co atoms in the Co4(SO4)4 cluster in OER by facilitating the formation of O─O bonds. This work is of fundamental significance to present the construction of Co4(SO4)4 clusters in framework structures for oxygen electrocatalysis and to demonstrate the cooperation between two proximal Co atoms in such clusters during the O─O bond formation process.

A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low-Concentration Sewage

Ammonia production by electrocatalytic nitrate reduction reaction (NO3RR) in water streams is anticipated as a zero-carbon route. Limited by dilute nitrate in natural sewage and the electrostatic repulsion between NO3 - and cathode, NO3RR can hardly be achieved energy-efficiently. The hydrophilic Cu@CuCoO2 nano-island dispersed on support can enrich NO3 - and produce a sensitive current response, followed by electrosynthesis of ammonia through atomic hydrogen (*H) is reported. The accumulated NO3 - can be partially converted to NO2 - without external electric field input, confirming that the Cu@CuCoO2 nano-island can strongly bind NO3 - and then trigger the reduction via dynamic evolution between Cu-Co redox sites. Through the identification of intermediates and theoretical computation. it is found that the N-side hydrogenation of *NO is the optimal reaction step, and the formation of N─N dimer may be prevented. An NH3 product selectivity of 93.5%, a nitrate conversion of 96.1%, and an energy consumption of 0.079 kWh gNH3 -1 is obtained in 48.9 mg-N L-1 naturally nitrate-polluted streams, which outperforms many works using such dilute nitrate influent. Conclusively, the electrocatalytic system provides a platform to guarantee the self-sufficiency of dispersed ammonia production in agricultural regions.

Highly Selective Electrocatalytic CO2 Conversion to Tailored Products through Precise Regulation of Hydrogenation and C-C Coupling

The electrochemical reduction reaction of carbon dioxide (CO2RR) into valuable products offers notable economic benefits and contributes to environmental sustainability. However, precisely controlling the reaction pathways and selectively converting key intermediates pose considerable challenges. In this study, our theoretical calculations reveal that the active sites with different states of copper atoms (1-3-5-7-9) play a pivotal role in the adsorption behavior of the *CHO critical intermediate. This behavior dictates the subsequent hydrogenation and coupling steps, ultimately influencing the formation of the desired products. Consequently, we designed two model electrocatalysts comprising Cu single atoms and particles supported on CeO2. This design enables controlled *CHO intermediate transformation through either hydrogenation with *H or coupling with *CO, leading to a highly selective CO2RR. Notably, our selective control strategy tunes the Faradaic efficiency from 61.1% for ethylene (C2H4) to 61.2% for methane (CH4). Additionally, the catalyst demonstrated a high current density and remarkable stability, exceeding 500 h of operation. This work not only provides efficient catalysts for selective CO2RR but also offers valuable insights into tailoring surface chemistry and designing catalysts for precise control over catalytic processes to achieve targeted product generation in CO2RR technology.

Enzymatic Activation and Continuous Electrochemical Production of Methane from Dilute CO2 Sources with a Self-Healing Capsule

Converting dilute CO2 source into value-added chemicals and fuels is a promising route to reduce fossil fuel consumption and greenhouse gas emission, but integrating electrocatalysis with CO2 capture still faced marked challenges. Herein, we show that a self-healing metal-organic macrocycle functionalized as an electrochemical catalyst to selectively produce methane from flue gas and air with the lowest applied potential so far (0.06 V vs reversible hydrogen electrode, RHE) through an enzymatic activation fashion. The capsule emulates the enzyme' pocket to abstract one in situ-formed CO2-adduct molecule with the commercial amino alcohols, forming an easy-to-reduce substrate-involving clathrate to combine the CO2 capture with electroreduction for a thorough CO2 reduction. We find that the self-healing system exhibited enzymatic kinetics for the first time with the Michaelis-Menten mechanism in the electrochemical reduction of CO2 and maintained a methane Faraday efficiency (FE) of 74.24% with a selectivity of over 99% for continuous operation over 200 h. A consecutive working lab at 50 mA·cm-2, in an eleven-for-one (10 h working and 1 h healing) electrolysis manner, gives a methane turnover number (TON) of more than 10,000 within 100 h. The integrated electrolysis with CO2 capture facilitates the thorough reduction of flue gas (ca. 13.0% of CO2) and first time of air (ca. 400 ppm of CO2 to 42.7 mL CH4 from 1.0 m3 air). The new self-healing strategy of molecular electrocatalyst with an enzymatic activation manner and anodic shifting of the applied potentials provided a departure from the existing electrochemical catalytic techniques.

Ordering Bimetallic Cu-Pd Catalysts onto Orderly Mesoporous SrTiO3-Crystal Nanotubular Networks for Efficient Carbon Dioxide Photoreduction

Artificial photosynthesis of fuels has garnered significant attention, with SrTiO3 emerging as a potential candidate for photocatalysis due to its exceptional physicochemical properties. However, selectively converting CO2 into fuels with desired reaction products remains a grand challenge. Herein, we design an updated method via an aging strategy based on the electrospinning technique to synthesize a single-crystalline Al-doped SrTiO3 nanotubular networks with self-assembled orderly mesopores, further modified by Cu-Pd alloy. It exhibits both high crystallinity and superior cross-linked mesoporous structures, effectively facilitating charge carrier transfer, photon utilization, and mass transfer, with a remarkable enhancement from 0.025 mmol h-1 m-2 to 1.090 mmol h-1 m-2 in the CO production rate. Meanwhile, the ordered arrangement of Cu and Pd atoms on the (111) surface can promote the rate-determining step (*CO2 to *COOH), which is also responsible for its good activity. The presence of CuO in the reaction confers a significant advantage for CO desorption, leading to a remarkable CO selectivity of 95.54 %. This work highlights new insights into developing advanced heterogeneous photocatalysts.

Constructing Favorable Microenvironment on Copper Grain Boundaries for CO2 Electro-conversion to Multicarbon Products

The electrochemical CO2 reduction reaction (eCO2RR) to multicarbon chemicals provides a promising avenue for storing renewable energy. Herein, we synthesized small Cu nanoparticles featuring enriched tiny grain boundaries (RGBs-Cu) through spatial confinement and in situ electroreduction. In-situ spectroscopy and theoretical calculations demonstrate that small-sized Cu grain boundaries significantly enhance the adsorption of the *CO intermediate, owing to the presence of abundant low-coordinated and disordered atoms. Furthermore, these grain boundaries, generated in situ under high current conditions, exhibit excellent stability during the eCO2RR process, thereby creating a stable *CO-rich microenvironment. This high local *CO concentration around the catalyst surface can reduce the energy barrier for C-C coupling and significantly increase the Faradaic efficiency (FE) for multicarbon products across both neutral and alkaline electrolytes. Specifically, the developed RGBs-Cu electrocatalyst achieved a peak FE of 77.3% for multicarbon products and maintained more than 134 h stability at a constant current density of -500 mA cm-2.

In situ Raman reveals the critical role of Pd in electrocatalytic CO2 reduction to CH4 on Cu-based catalysts

Electrocatalytic CO2 reduction reaction (CO2RR) for CH4 production presents a promising strategy to address carbon neutrality, and the incorporation of a second metal has been proven effective in enhancing catalyst performance. Nevertheless, there remains limited comprehension regarding the fundamental factors responsible for the improved performance. Herein, the critical role of Pd in electrocatalytic CO2 reduction to CH4 on Cu-based catalysts has been revealed at a molecular level using in situ surface-enhanced Raman spectroscopy (SERS). A "borrowing" SERS strategy has been developed by depositing Cu-Pd overlayers on plasmonic Au nanoparticles to achieve the in situ monitoring of the dynamic change of the intermediate during CO2RR. Electrochemical tests demonstrate that Pd incorporation significantly enhances selectivity toward CH4 production, and the Faradaic efficiency (FE) of CH4 is more than two times higher than that for the catalysts without Pd. The key intermediates, including *CO2-, *CO, and *OH, have been directly identified under CO2RR conditions, and their evolution with the electrochemical environments has been determined. It is found that Pd incorporation promotes the activation of both CO2 and H2O molecules and accelerates the formation of abundant active *CO and hydrogen species, thus enhancing the CH4 selectivity. This work offers fundamental insights into the understanding of the molecular mechanism of CO2RR and opens up possibilities for designing more efficient electrocatalysts.

RuCo/ZrO2 Tandem Catalysts with Photothermal Confinement Effect for Enhanced CO2 Methanation

Photothermal CO2 methanation reaction represents a promising strategy for addressing CO2-related environmental issues. The presence of efficient tandem catalytic sites with a localized high-temperature is an effective pathway to enhance the performance of CO2 methanation. Here the bimetallic RuCo nanoparticles anchored on ZrO2 fiber cotton (RuCo/ZrO2) as a photothermal catalyst for CO2 methanation are prepared. A significant photothermal CO2 methanation performance with optimal CH4 selectivity (99%) and rate (169.93 mmol gcat -1 h-1) is achieved. The photothermal energy of the RuCo bimetallic nanoparticles, confined by the infrared insulation and low thermal conductivity of the ZrO2 fiber cotton (ZrO2 FC), provides a localized high-temperature. In situ spectroscopic experiments on RuCo/ZrO2, Ru/ZrO2, and Co/ZrO2 indicate that the construction of tandem catalytic sites, where the Co site favors CO2 conversion to CO while incorporating Ru enhances CO* adsorption for subsequent hydrogenation, results in a higher selectivity toward CH4. This work opens a new insight into designing tandem catalysts with a photothermal confinement effect in CO2 methanation reaction.

Modulating Electronic States of Cu in Metal-Organic Frameworks for Emerging Controllable CH4/C2H4 Selectivity in CO2 Electroreduction

The intensive study of electrochemical CO2 reduction reaction (CO2RR) has resulted in numerous highly selective catalysts, however, most of these still exhibit uncontrollable selectivity. Here, it is reported for the first time the controllable CH4/C2H4 selectivity by modulating the electronic states of Cu incorporated in metal-organic frameworks with different functional ligands, achieving a Faradaic efficiency of 58% for CH4 on Cu-incorporated UiO-66-H (Ce) composite catalysts, Cu/UiO-66-H (Ce) and that of 44% for C2H4 on Cu/UiO-66-F (Ce). In situ measurements of Raman and X-ray absorption spectra revealed that the electron-withdrawing ability of the ligand side group controls the product selectivity on MOFs through the modulation of the electronic states of Cu. This work opens new prospects for the development of MOFs as a platform for the tailored tuning of selectivity in CO2RR.

Computational screening of defective BC3-supported single-atom catalysts for electrochemical CO2 reduction

The electrochemical CO2 reduction reaction (eCO2RR) driven by renewable electricity offers a green and sustainable technology for synthesizing chemicals and managing global carbon balance. However, developing electrocatalysts with high activity and selectivity for producing C1 products (CO, HCOOH, CH3OH, and CH4) remains a daunting task. In this study, we conducted comprehensive first-principles calculations to investigate the eCO2RR mechanism using B-defective BC3-supported transition metal single-atom catalysts (TM@BC3 SACs). Initially, we evaluated the thermodynamic and electrochemical stability of the designed 26 TM@BC3 SACs by calculating the binding energy and dissolution potential of the anchored TM atoms. Subsequently, the selectivity of the eCO2RR and hydrogen evolution reaction (HER) on stable SACs was determined by comparing the free energy change (ΔG) for the first protonation of CO2 with the ΔG of *H formation. The stability and selectivity screening processes enabled us to narrow down the pool of SACs to the 14 promising ones. Finally, volcano plots for the eCO2RR towards different C1 products were established by using the adsorption energy descriptors of key intermediates, and three SACs were predicted to exhibit high activity and selectivity. The limiting potentials (UL) for HCOOH production on Pd@BC3 and Ag@BC3 are -0.11 V and -0.14 V. CH4 is a preferred product on Re@BC3 with UL of -0.22 V. Elaborate electronic structure calculations elucidate that the activity and selectivity originate from the sufficient activation of the C-O bond and the strong orbital hybridization between crucial intermediates and metal atoms. The proposed catalyst screening criteria, constructed volcano plots and predicted SACs may provide a theoretical foundation for the development of computationally guided catalyst designs for electrochemical CO2 conversion to C1 products.

Asymmetric Cu(I)─W Dual-Atomic Sites Enable C─C Coupling for Selective Photocatalytic CO2 Reduction to C2H4

Solar-driven CO2 reduction into value-added C2+ chemical fuels, such as C2H4, is promising in meeting the carbon-neutral future, yet the performance is usually hindered by the high energy barrier of the C─C coupling process. Here, an efficient and stabilized Cu(I) single atoms-modified W18O49 nanowires (Cu1/W18O49) photocatalyst with asymmetric Cu─W dual sites is reported for selective photocatalytic CO2 reduction to C2H4. The interconversion between W(V) and W(VI) in W18O49 ensures the stability of Cu(I) during the photocatalytic process. Under light irradiation, the optimal Cu1/W18O49 (3.6-Cu1/W18O49) catalyst exhibits concurrent high activity and selectivity toward C2H4 production, reaching a corresponding yield rate of 4.9 µmol g-1 h-1 and selectivity as high as 72.8%, respectively. Combined in situ spectroscopies and computational calculations reveal that Cu(I) single atoms stabilize the *CO intermediate, and the asymmetric Cu─W dual sites effectively reduce the energy barrier for the C─C coupling of two neighboring CO intermediates, enabling the highly selective C2H4 generation from CO2 photoreduction. This work demonstrates leveraging stabilized atomically-dispersed Cu(I) in asymmetric dual-sites for selective CO2-to-C2H4 conversion and can provide new insight into photocatalytic CO2 reduction to other targeted C2+ products through rational construction of active sites for C─C coupling.

Tuning CuMgAl-Layered Double Hydroxide Nanostructures to Achieve CH4 and C2+ Product Selectivity in CO2 Electroreduction

Electrochemical CO2 reduction reaction (eCO2RR) over Cu-based catalysts is a promising approach for efficiently converting CO2 into value-added chemicals and alternative fuels. However, achieving controllable product selectivity from eCO2RR remains challenging because of the difficulty in controlling the oxidation states of Cu against robust structural reconstructions during the eCO2RR. Herein, we report a novel strategy for tuning the oxidation states of Cu species and achieving eCO2RR product selectivity by adjusting the Cu content in CuMgAl-layered double hydroxide (LDH)-based catalysts. In this strategy, the highly stable Cu2+ species in low-Cu-containing LDHs facilitated the strong adsorption of *CO intermediates and further hydrogenation into CH4. Conversely, the mixed Cu0/Cu+ species in high-Cu-containing LDHs derived from the electroreduction during the eCO2RR accelerated C-C coupling reactions. This strategy to regulate Cu oxidation states using LDH nanostructures with low and high Cu molar ratios produced an excellent eCO2RR performance for CH4 and C2+ products, respectively.

Bi/CeO2-Decorated CuS Electrocatalysts for CO2-to-Formate Conversion

The electrocatalytic carbon dioxide (CO2) reduction reaction (CO2RR) is extensively regarded as a promising strategy to reach carbon neutralization. Copper sulfide (CuS) has been widely studied for its ability to produce C1 products with high selectivity. However, challenges still remain owing to the poor selectivity of formate. Here, a Bi/CeO2/CuS composite was synthesized using a simple solvothermal method. Bi/CeO2-decorated CuS possessed high formate selectivity, with the Faraday efficiency and current density reaching 88% and 17 mA cm-2, respectively, in an H-cell. The Bi/CeO2/CuS structure significantly reduces the energy barrier formed by OCHO*, resulting in the high activity and selectivity of the CO2 conversion to formate. Ce4+ readily undergoes reduction to Ce3+, allowing the formation of a conductive network of Ce4+/Ce3+. This network facilitates electron transfer, stabilizes the Cu+ species, and enhances the adsorption and activation of CO2. Furthermore, sulfur catalyzes the OCHO* transformation to formate. This work describes a highly efficient catalyst for CO2 to formate, which will aid in catalyst design for CO2RR to target products.

Stabilizing the oxidation state of catalysts for effective electrochemical carbon dioxide conversion

In the electrocatalytic CO2 reduction reaction (CO2RR), metal catalysts with an oxidation state generally demonstrate more favorable catalytic activity and selectivity than their corresponding metallic counterparts. However, the persistence of oxidative metal sites under reductive potentials is challenging since the transition to metallic states inevitably leads to catalytic degradation. Herein, a thorough review of research on oxidation-state stabilization in the CO2RR is presented, starting from fundamental concepts and highlighting the importance of oxidation state stabilization while revealing the relevance of dynamic oxidation states in product distribution. Subsequently, the functional mechanisms of various oxidation-state protection strategies are explained in detail, and in situ detection techniques are discussed. Finally, the prevailing and prospective challenges associated with oxidation-state protection research are discussed, identifying innovative opportunities for mechanistic insights, technology upgrades, and industrial platforms to enable the commercialization of the CO2RR.

Steering the Reaction Pathway of CO2 Electroreduction by Tuning the Coordination Number of Copper Catalysts

Cu-based catalysts are optimal for the electroreduction of CO2 to generate hydrocarbon products. However, controlling product distribution remains a challenging topic. The theoretical investigations have revealed that the coordination number (CN) of Cu considerably influences the adsorption energy of *CO intermediates, thereby affecting the reaction pathway. Cu catalysts with different CNs were fabricated by reducing CuO precursors via cyclic voltammetry (Cyc-Cu), potentiostatic electrolysis (Pot-Cu), and pulsed electrolysis (Pul-Cu), respectively. High-CN Cu catalysts predominantly generate C2+ products, while low-CN Cu favors CH4 production. For instance, over the high-CN Pot-Cu, C2+ is the main product, with the Faradaic efficiency (FE) reaching 82.5% and a partial current density (j) of 514.3 mA cm-2. Conversely, the low-CN Pul(3)-Cu favors the production of CH4, achieving the highest FECH4 value of 56.7% with a jCH4 value of 234.4 mA cm-2. In situ X-ray absorption spectroscopy and Raman spectroscopy studies further confirm the different *CO adsorptions over Cu catalysts with different CN, thereby directing the reaction pathway of the CO2RR.

Advances and challenges in the electrochemical reduction of carbon dioxide

The electrocatalytic carbon dioxide reduction reaction (ECO2RR) is a promising way to realize the transformation of waste into valuable material, which can not only meet the environmental goal of reducing carbon emissions, but also obtain clean energy and valuable industrial products simultaneously. Herein, we first introduce the complex CO2RR mechanisms based on the number of carbons in the product. Since the coupling of C-C bonds is unanimously recognized as the key mechanism step in the ECO2RR for the generation of high-value products, the structural-activity relationship of electrocatalysts is systematically reviewed. Next, we comprehensively classify the latest developments, both experimental and theoretical, in different categories of cutting-edge electrocatalysts and provide theoretical insights on various aspects. Finally, challenges are discussed from the perspectives of both materials and devices to inspire researchers to promote the industrial application of the ECO2RR at the earliest.

Regulating Cu Oxidation State for Electrocatalytic CO2 Conversion into CO with Near-Unity Selectivity via Oxygen Spillover

Cu-based catalysts are the most intensively studied in the field of electrocatalytic CO2 reduction reaction (CO2RR), demonstrating the capacity to yield diverse C1 and C2+ products albeit with unsatisfactory selectivity. Manipulation of the oxidation state of Cu sites during CO2RR process proves advantageous in modulating the selectivity of productions, but poses a formidable challenge. Here, an oxygen spillover strategy is proposed to enhance the oxidation state of Cu during CO2RR by incorporating the oxygen donor Sb2O4. The Cu-Sb bimetallic oxide catalyst attains a remarkable CO2-to-CO selectivity approaching unity, in stark contrast to the diverse product distribution observed with bare CuO. The exceptional Faradaic efficiency of CO can be maintained across a wide range of potential windows of ≈700 mV in 1 m KOH, and remains independent of the Cu/Sb ratio (ranging from 0.1:1 to 10:1). Correlative calculations and experimental results reveal that oxygen spillover from Sb2O4 to Cu sites maintains the relatively high valence state of Cu during CO2RR, which diminishes the binding strength of *CO, thereby achieving heightened selectivity in CO production. These findings propose the role of oxygen spillover in CO2RR over Cu-based catalysts, and shed light on the rational design of highly selective CO2 reduction catalysts.

Highly dispersed Cu-Cu2O-CeOx interfaces on reduced graphene oxide for CO2 electroreduction to C2+ products

The Cu0-Cu+ interfaces play a key role in the electrochemical CO2 reduction reaction (CO2RR) to produce multi-carbon products (C2+), however, it is difficult for Cu+ to exist stably under reducing conditions. Herein, we construct highly dispersed and stable Cu-Cu2O-CeOx interface on reduced graphene oxide (rGO) for CO2 electroreduction to C2+ products. During the synthesis process, utilizing strong electrostatic interactions, the complex ions of Cu2+ and Ce3+ are uniformly adsorbed on the surface of graphene oxide. Then, under the solvothermal reaction of ethylene glycol and thiourea, the two metal complex ions are converted into highly dispersed and ultrafine Cu2S-CeOx nanocomposites on rGO. Interestingly, CeOx and thiourea synergistically regulate the generation of only Cu+. Under the CO2RR process, the reconstruction of Cu2S promotes the formation of Cu0 and Cu2O species. CeOx stabilizes partial Cu+ species and promotes the formation of Cu-Cu2O-CeOx composite interface. With the help of synergistic effect of Cu0, Cu+ and CeOx, the optimized reaction interface achieves the Faradaic efficiency (FE) of 74.5 % for C2+ products with the current density of 230 mA cm-2 at -0.9 V versus the reversible hydrogen electrode. In situ attenuate total reflectance-infrared absorption spectroscopy (ATR-IRAS) spectra show that the composite interfaces promote the adsorption and activation of H2O and CO2, improve the surface coverage of CO intermediates (*CO), and thus accelerate the CC coupling process.

Low-coordination Nanocrystalline Copper-based Catalysts through Theory-guided Electrochemical Restructuring for Selective CO2 Reduction to Ethylene

Revealing the dynamic reconstruction process and tailoring advanced copper (Cu) catalysts is of paramount significance for promoting the conversion of CO2 into ethylene (C2H4), paving the way for carbon neutralization and facilitating renewable energy storage. In this study, we initially employed density functional theory (DFT) and molecular dynamics (MD) simulations to elucidate the restructuring behavior of a catalyst under electrochemical conditions and delineated its restructuring patterns. Leveraging insights into this restructuring behavior, we devised an efficient, low-coordination copper-based catalyst. The resulting synthesized catalyst demonstrated an impressive Faradaic efficiency (FE) exceeding 70 % for ethylene generation at a current density of 800 mA cm-2. Furthermore, it showed robust stability, maintaining consistent performance for 230 hours at a cell voltage of 3.5 V in a full-cell system. Our research not only deepens the understanding of the active sites involved in designing efficient carbon dioxide reduction reaction (CO2RR) catalysts but also advances CO2 electrolysis technologies for industrial application.

Bottom-Up Construction of Mesoporous Cerium-Doped Titania with Stably Dispersed Pt Nanocluster for Efficient Hydrogen Evolution

Hydrogen generation is one of the crucial technologies to realize sustainable energy development, and the design of advanced catalysts with efficient interfacial sites and fast mass transfer is significant for hydrogen evolution. Herein, an in situ coassembly strategy was proposed to engineer a cerium-doped ordered mesoporous titanium oxide (mpCe/TiO2), of which the abundant oxygen vacancies (Ov) and highly exposed active pore walls contribute to good stability of ultrasmall Pt nanoclusters (NCs, ∼ 1.0 nm in diameter) anchored in the uniform mesopores (ca. 20 nm). Consequently, the tailored mpCe/TiO2 with 0.5 mol % Ce-doping-supported Pt NCs (Pt-mpCe/TiO2-0.5) exhibits superior H2 evolution performance toward the water-gas shift reaction with a 0.73 molH2·s-1·molPt-1 H2 evolution rate at 200 °C, which is almost 6-fold higher than the Pt-mpTiO2 (0.13 molH2·s-1·molPt-1 H2). Density functional theory calculations confirm that the structure of Ce-doped TiO2 with Ce coordinated to six O atoms by substituting Ti atoms is thermodynamically favorable without the deformation of Ti-O bonds. The Ov generated by the six O atom-coordinated Ce doping is highly active for H2O dissociation with an energy barrier of 2.18 eV, which is obviously lower than the 2.37 eV for the control TiO2. In comparison with TiO2, the resultant Ce/TiO2 support acts as a superior electron acceptor for Pt NCs and causes electron deficiency at the Pt/support interface with a 0.17 eV downshift of the Pt d-band center, showing extremely obvious electronic metal-support interaction (EMSI). As a result, abundant and hyperactive Ti3+-Ov(-Ce3+)-Ptδ+ interfacial sites are formed to significantly promote the generation of CO2 and H2 evolution. In addition, the stronger EMSI between Pt NCs and mpCe/TiO2-0.5 than that between Pt and mpTiO2 contributes to the superior self-enhanced catalytic performance during the cyclic test, where the CO conversion at 200 °C increases from 72% for the fresh catalyst to 99% for the used one. These findings reveal the subtle relationship between the mesoporous metal oxide-metal composite catalysts with unique chemical microenvironments and their catalytic performance, which is expected to inspire the design of efficient heterogeneous catalysts.

Rare-earth Element-based Electrocatalysts Designed for CO2 Electro-reduction

Electrochemical CO2 reduction presents a promising approach for synthesizing fuels and chemical feedstocks using renewable energy sources. Although significant advancements have been made in the design of catalysts for CO2 reduction reaction (CO2RR) in recent years, the linear scaling relationship of key intermediates, selectivity, stability, and economical efficiency are still required to be improved. Rare earth (RE) elements, recognized as pivotal components in various industrial applications, have been widely used in catalysis due to their unique properties such as redox characteristics, orbital structure, oxygen affinity, large ion radius, and electronic configuration. Furthermore, RE elements could effectively modulate the adsorption strength of intermediates and provide abundant metal active sites for CO2RR. Despite their potential, there is still a shortage of comprehensive and systematic analysis of RE elements employed in the design of electrocatalysts of CO2RR. Therefore, the current approaches for the design of RE element-based electrocatalysts and their applications in CO2RR are thoroughly summarized in this review. The review starts by outlining the characteristics of CO2RR and RE elements, followed by a summary of design strategies and synthetic methods for RE element-based electrocatalysts. Finally, an overview of current limitations in research and an outline of the prospects for future investigations are proposed.

Built-in Electric Field Promotes Interfacial Adsorption and Activation of CO2 for C1 Products over a Wide Potential Window

The unsatisfactory adsorption and activation of CO2 suppress electrochemical reduction over a wide potential window. Herein, the built-in electric field (BIEF) at the CeO2/In2O3 n-n heterostructure realizes the C1 (CO and HCOO-) selectivity over 90.0% in a broad range of potentials from -0.7 to -1.1 V with a maximum value of 98.7 ± 0.3% at -0.8 V. In addition, the C1 current density (-1.1 V) of the CeO2/In2O3 heterostructure with a BIEF is about 2.0- and 3.2-fold that of In2O3 and a physically mixed sample, respectively. The experimental and theoretical calculation results indicate that the introduction of CeO2 triggered the charge redistribution and formed the BIEF at the interfaces, which enhanced the interfacial adsorption and activation of CO2 at low overpotentials. Furthermore, the promoting effect was also extended to CeO2/In2S3. This work gives a deep understanding of BIEF engineering for highly efficient CO2 electroreduction over a wide potential window.

Electron Localization-Triggered Proton Pumping Toward Cu Single Atoms for Electrochemical CO2 Methanation of Unprecedented Selectivity

Slow multi-proton coupled electron transfer kinetics and unexpected desorption of intermediates severely hinder the selectivity of CO2 methanation. In this work, a one-stone-two-bird strategy of pumping protons and improving adsorption configuration/capability enabled by electron localization is developed to be highly efficient for CH4 electrosynthesis over Cu single atoms anchored on bismuth vacancies of BiVO4 (Bi1-xVO4─Cu), with superior kinetic isotope effect and high CH4 Faraday efficiency (92%), far outperforming state-of-the-art electrocatalysts for CO2 methanation. Control experiments and theoretical calculations reveal that the bismuth vacancies (VBi) not only act as active sites for H2O dissociation but also induce electron transfer toward Cu single-atom sites. The VBi-induced electron localization pumps *H from VBi sites to Cu single atoms, significantly promoting the generation and stabilization of the pivotal intermediate (*CHO) for highly selective CH4 electrosynthesis. The metal vacancies as new initiators show enormous potential in the proton transfer-involved hydrogenative conversion processes.

Recent Advances in Electrocatalytic Hydrogenation Reactions on Copper-Based Catalysts

Hydrogenation reactions play a critical role in the synthesis of value-added products within the chemical industry. Electrocatalytic hydrogenation (ECH) using water as the hydrogen source has emerged as an alternative to conventional thermocatalytic processes for sustainable and decentralized chemical synthesis under mild conditions. Among the various ECH catalysts, copper-based (Cu-based) nanomaterials are promising candidates due to their earth-abundance, unique electronic structure, versatility, and high activity/selectivity. Herein, recent advances in the application of Cu-based catalysts in ECH reactions for the upgrading of valuable chemicals are systematically analyzed. The unique properties of Cu-based catalysts in ECH are initially introduced, followed by design strategies to enhance their activity and selectivity. Then, typical ECH reactions on Cu-based catalysts are presented in detail, including carbon dioxide reduction for multicarbon generation, alkyne-to-alkene conversion, selective aldehyde conversion, ammonia production from nitrogen-containing substances, and amine production from organic nitrogen compounds. In these catalysts, the role of catalyst composition and nanostructures toward different products is focused. The co-hydrogenation of two substrates (e.g., CO2 and NOx n, SO3 2-, etc.) via C─N, C─S, and C─C cross-coupling reactions are also highlighted. Finally, the critical issues and future perspectives of Cu-catalyzed ECH are proposed to accelerate the rational development of next-generation catalysts.

Customizing catalyst surface/interface structures for electrochemical CO2 reduction

Electrochemical CO2 reduction reaction (CO2RR) provides a promising route to converting CO2 into value-added chemicals and to neutralizing the greenhouse gas emission. For the industrial application of CO2RR, high-performance electrocatalysts featuring high activities and selectivities are essential. It has been demonstrated that customizing the catalyst surface/interface structures allows for high-precision control over the microenvironment for catalysis as well as the adsorption/desorption behaviors of key reaction intermediates in CO2RR, thereby elevating the activity, selectivity and stability of the electrocatalysts. In this paper, we review the progress in customizing the surface/interface structures for CO2RR electrocatalysts (including atomic-site catalysts, metal catalysts, and metal/oxide catalysts). From the perspectives of coordination engineering, atomic interface design, surface modification, and hetero-interface construction, we delineate the resulting specific alterations in surface/interface structures, and their effect on the CO2RR process. At the end of this review, we present a brief discussion and outlook on the current challenges and future directions for achieving high-efficiency CO2RR via surface/interface engineering.

Surface engineering for stable electrocatalysis

In recent decades, significant progress has been achieved in rational developments of electrocatalysts through constructing novel atomistic structures and modulating catalytic surface topography, realizing substantial enhancement in electrocatalytic activities. Numerous advanced catalysts were developed for electrochemical energy conversion, exhibiting low overpotential, high intrinsic activity, and selectivity. Yet, maintaining the high catalytic performance under working conditions with high polarization and vigorous microkinetics that induce intensive degradation of surface nanostructures presents a significant challenge for commercial applications. Recently, advanced operando and computational techniques have provided comprehensive mechanistic insights into the degradation of surficial functional structures. Additionally, various innovative strategies have been devised and proven effective in sustaining electrocatalytic activity under harsh operating conditions. This review aims to discuss the most recent understanding of the degradation microkinetics of catalysts across an entire range of anodic to cathodic polarizations, encompassing processes such as oxygen evolution and reduction, hydrogen reduction, and carbon dioxide reduction. Subsequently, innovative strategies adopted to stabilize the materials' structure and activity are highlighted with an in-depth discussion of the underlying rationale. Finally, we present conclusions and perspectives regarding future research and development. By identifying the research gaps, this review aims to inspire further exploration of surface degradation mechanisms and rational design of durable electrocatalysts, ultimately contributing to the large-scale utilization of electroconversion technologies.

Cascade Dual Sites Modulate Local CO Coverage and Hydrogen-Binding Strength to Boost CO2 Electroreduction to Ethylene

Rationally modulating the binding strength of reaction intermediates on surface sites of copper-based catalysts could facilitate C-C coupling to generate multicarbon products in an electrochemical CO2 reduction reaction. Herein, theoretical calculations reveal that cascade Ag-Cu dual sites could synergistically increase local CO coverage and lower the kinetic barrier for CO protonation, leading to enhanced asymmetric C-C coupling to generate C2H4. As a proof of concept, the Cu3N-Ag nanocubes (NCs) with Ag located in partial Cu sites and a Cu3N unit center are successfully synthesized. The Faraday efficiency and partial current density of C2H4 over Cu3N-Ag NCs are 7.8 and 9.0 times those of Cu3N NCs, respectively. In situ spectroscopies combined with theoretical calculations confirm that Ag sites produce CO and Cu sites promote asymmetric C-C coupling to *COCHO, significantly enhancing the generation of C2H4. Our work provides new insights into the cascade catalysis strategy at the atomic scale for boosting CO2 to multicarbon products.

Superexchange-stabilized long-distance Cu sites in rock-salt-ordered double perovskite oxides for CO2 electromethanation

Cu-oxide-based catalysts are promising for CO2 electroreduction (CO2RR) to CH4, but suffer from inevitable reduction (to metallic Cu) and uncontrollable structural collapse. Here we report Cu-based rock-salt-ordered double perovskite oxides with superexchange-stabilized long-distance Cu sites for efficient and stable CO2-to-CH4 conversion. For the proof-of-concept catalyst of Sr2CuWO6, its corner-linked CuO6 and WO6 octahedral motifs alternate in all three crystallographic dimensions, creating sufficiently long Cu-Cu distances (at least 5.4 Å) and introducing marked superexchange interaction mainly manifested by O-anion-mediated electron transfer (from Cu to W sites). In CO2RR, the Sr2CuWO6 exhibits significant improvements (up to 14.1 folds) in activity and selectivity for CH4, together with well boosted stability, relative to a physical-mixture counterpart of CuO/WO3. Moreover, the Sr2CuWO6 is the most effective Cu-based-perovskite catalyst for CO2 methanation, achieving a remarkable selectivity of 73.1% at 400 mA cm-2 for CH4. Our experiments and theoretical calculations highlight the long Cu-Cu distances promoting *CO hydrogenation and the superexchange interaction stabilizing Cu sites as responsible for the superb performance.

Copper-Enhanced CO2 Electroreduction in SOECs

The development of a Co-free and Ni-free electrocatalyst for carbon dioxide electrolysis would be a turning point for the large-scale commercialization of solid-oxide electrolysis cells (CO2-SOECs). Indeed, the demand for cobalt and nickel is expected to become critical by 2050 due to automotive electrification. Currently, the reference materials for CO2-SOEC electrodes are perovskite oxides containing Mn or Co (anodes) and Ni-YSZ cermets (cathodes). However, issues need to be addressed, such as structural degradation and/or carbon deposition at the cathode side, especially at high overpotentials. This work designs the 20 mol % replacement of iron by copper in La0.6Sr0.4FeO3-δ as a multipurpose electrode for CO2-SOECs. La0.6Sr0.4Fe0.8Cu0.2O3-δ (LSFCu) is synthesized by the solution combustion method, and iron partial substitution with copper is evaluated by X-ray powder diffraction with Rietveld refinement, X-ray photoelectron spectroscopy, thermogravimetric analyses, and electrical conductivity assessment. LSFCu is tested as the SOEC anode by measuring the area-specific resistance versus T and pO2. LSFCu structural, electrical, and electrocatalytic properties are also assessed in pure CO2 for the cathodic application. Finally, the proof of concept of a symmetric LSFCu-based CO2-SOEC is tested at 850 °C, revealing a current density value at 1.5 V of 1.22 A/cm2, which is remarkable when compared to similar Ni- or Co-containing systems.

Local reaction environment in electrocatalysis

Beyond conventional electrocatalyst engineering, recent studies have unveiled the effectiveness of manipulating the local reaction environment in enhancing the performance of electrocatalytic reactions. The general principles and strategies of local environmental engineering for different electrocatalytic processes have been extensively investigated. This review provides a critical appraisal of the recent advancements in local reaction environment engineering, aiming to comprehensively assess this emerging field. It presents the interactions among surface structure, ions distribution and local electric field in relation to the local reaction environment. Useful protocols such as the interfacial reactant concentration, mass transport rate, adsorption/desorption behaviors, and binding energy are in-depth discussed toward modifying the local reaction environment. Meanwhile, electrode physical structures and reaction cell configurations are viable optimization methods in engineering local reaction environments. In combination with operando investigation techniques, we conclude that rational modifications of the local reaction environment can significantly enhance various electrocatalytic processes by optimizing the thermodynamic and kinetic properties of the reaction interface. We also outline future research directions to attain a comprehensive understanding and effective modulation of the local reaction environment.

Tuning oxidant and antioxidant activities of ceria by anchoring copper single-site for antibacterial application

The reaction system of hydrogen peroxide (H2O2) catalyzed by nanozyme has a broad prospect in antibacterial treatment. However, the complex catalytic activities of nanozymes lead to multiple pathways reacting in parallel, causing uncertain antibacterial results. New approach to effectively regulate the multiple catalytic activities of nanozyme is in urgent need. Herein, Cu single site is modified on nanoceria with various catalytic activities, such as peroxidase-like activity (POD) and hydroxyl radical antioxidant capacity (HORAC). Benefiting from the interaction between coordinated Cu and CeO2 substrate, POD is enhanced while HORAC is inhibited, which is further confirmed by density functional theory (DFT) calculations. Cu-CeO2 + H2O2 system shows good antibacterial properties both in vitro and in vivo. In this work, the strategy based on the interaction between coordinated metal and carrier provides a general clue for optimizing the complex activities of nanozymes.

Designing Surface and Interface Structures of Copper-Based Catalysts for Enhanced Electrochemical Reduction of CO2 to Alcohols

Electrochemical CO2 reduction (ECR) has emerged as a promising solution to address both the greenhouse effect caused by CO2 emissions and the energy shortage resulting from the depletion of nonrenewable fossil fuels. The production of multicarbon (C2+) products via ECR, especially high-energy-density alcohols, is highly desirable for industrial applications. Copper (Cu) is the only metal that produces alcohols with appreciable efficiency and kinetic viability in aqueous solutions. However, poor product selectivity is the main technical problem for applying the ECR technology in alcohol production. Extensive research has resulted in the rational design of electrocatalyst architectures using various strategies. This design significantly affects the adsorption energetics of intermediates and the reaction pathways for alcohol production. In this review, we focus on the design of effective catalysts for ECR to alcohols, discussing fundamental principles, innovative strategies, and mechanism understanding. Furthermore, the challenges and prospects in utilizing Cu-based materials for alcohol production via ECR are discussed.

Covalent Organic Framework Ionomer Steering the CO2 Electroreduction Pathway on Cu at Industrial-Grade Current Density

CO2 electroreduction holds great promise for addressing global energy and sustainability challenges. Copper (Cu) shows great potential for effective conversion of CO2 toward specific value-added and/or high-energy-density products. However, its limitation lies in relatively low product selectivity. Herein, we present that the CO2 reduction reaction (CO2RR) pathway on commercially available Cu can be rationally steered by modulating the microenvironment in the vicinity of the Cu surface with two-dimensional sulfonated covalent organic framework nanosheet (COF-NS)-based ionomers. Specifically, the selectivity toward methane (CH4) can be enhanced to more than 60% with the total current density up to 500 mA cm-2 in flow cells in both acidic (pH = 2) and alkaline (pH = 14) electrolytes. The COF-NS, characterized by abundant apertures, can promote the accumulation of CO2 and K+ near the catalyst surface, alter the adsorption energy and surface coverage of *CO, facilitate the dissociation of H2O, and finally modulate the reaction pathway for the CO2RR. Our approach demonstrates the rational modulation of reaction interfaces for the CO2RR utilizing porous open framework ionomers, showcasing their potential practical applications.

N and OH-Immobilized Cu3 Clusters In Situ Reconstructed from Single-Metal Sites for Efficient CO2 Electromethanation in Bicontinuous Mesochannels

Cu-based catalysts hold promise for electrifying CO2 to produce methane, an extensively used fuel. However, the activity and selectivity remain insufficient due to the lack of catalyst design principles to steer complex CO2 reduction pathways. Herein, we develop a concept to design carbon-supported Cu catalysts by regulating Cu active sites' atomic-scale structures and engineering the carbon support's mesoscale architecture. This aims to provide a favorable local reaction microenvironment for a selective CO2 reduction pathway to methane. In situ X-ray absorption and Raman spectroscopy analyses reveal the dynamic reconstruction of nitrogen and hydroxyl-immobilized Cu3 (N,OH-Cu3) clusters derived from atomically dispersed Cu-N3 sites under realistic CO2 reduction conditions. The N,OH-Cu3 sites possess moderate *CO adsorption affinity and a low barrier for *CO hydrogenation, enabling intrinsically selective CO2-to-CH4 reduction compared to the C-C coupling with a high energy barrier. Importantly, a block copolymer-derived carbon fiber support with interconnected mesopores is constructed. The unique long-range mesochannels offer an H2O-deficient microenvironment and prolong the transport path for the CO intermediate, which could suppress the hydrogen evolution reaction and favor deep CO2 reduction toward methane formation. Thus, the newly developed catalyst consisting of in situ constructed N,OH-Cu3 active sites embedded into bicontinuous carbon mesochannels achieved an unprecedented Faradaic efficiency of 74.2% for the CO2 reduction to methane at an industry-level current density of 300 mA cm-2. This work explores effective concepts for steering desirable reaction pathways in complex interfacial catalytic systems via modulating active site structures at the atomic level and engineering pore architectures of supports on the mesoscale to create favorable microenvironments.

Screening of Transition Metal Supported on Black Phosphorus as Electrocatalysts for CO2 Reduction

The electrocatalytic CO2 reduction (CO2RR) is an effective and economical strategy to eliminate CO2 through conversion into value-added chemicals and fuels. However, exploring and screening suitable 2D material-based single-atom catalysts (SACs) for CO2 reduction are still a great challenge. In this study, 27 (3d, 4d, and 5d, except Tc and Hg) transition metal (TM) atom-doped black phosphorus (TM@BP) electrocatalysts were systematically investigated for CO2RR by density functional theory calculations. According to the stability of SACs and their effectiveness in activating the CO2 molecule, three promising catalysts, Zr@BP, Nb@BP, and Ru@BP, were successfully screened out, exhibiting outstanding catalytic activity for the production of carbon monoxide (CO), methyl alcohol (CH3OH), and methane (CH4) with limiting potentials of -0.79, -0.49, and -0.60 V, respectively. A catalytic relationship between the d-band centers of SACs and the limiting potential of CO2RR was used to estimate the catalytic activity of catalysts. Furthermore, Nb@BP has high selectivity for CO2RR to CH3OH compared to H2 formation, while the hydrogen evolution reaction significantly impacts the synthesis of CO and CH4 on Zr@BP and Ru@BP. Nitrogen atom doping in BP is beneficial for enhancing the selectivity of CO2RR, but it is detrimental to the activity of CO2RR. This study offers theoretical guidance for synthesizing highly efficient CO2RR electrocatalysts and further enhances structural modulation methods for layered 2D materials.

Continuously Producing Highly Concentrated and Pure Acetic Acid Aqueous Solution via Direct Electroreduction of CO2

It is crucial to achieve continuous production of highly concentrated and pure C2 chemicals through the electrochemical CO2 reduction reaction (eCO2RR) for artificial carbon cycling, yet it has remained unattainable until now. Despite one-pot tandem catalysis (dividing the eCO2RR to C2 into two catalytical reactions of CO2 to CO and CO to C2) offering the potential for significantly enhancing reaction efficiency, its mechanism remains unclear and its performance is unsatisfactory. Herein, we selected different CO2-to-CO catalysts and CO-to-acetate catalysts to construct several tandem catalytic systems for the eCO2RR to acetic acid. Among them, a tandem catalytic system comprising a covalent organic framework (PcNi-DMTP) and a metal-organic framework (MAF-2) as CO2-to-CO and CO-to-acetate catalysts, respectively, exhibited a faradaic efficiency of 51.2% with a current density of 410 mA cm-2 and an ultrahigh acetate yield rate of 2.72 mmol m-2 s-1 under neutral conditions. After electrolysis for 200 h, 1 cm-2 working electrode can continuously produce 20 mM acetic acid aqueous solution with a relative purity of 95+%. Comprehensive studies revealed that the performance of tandem catalysts is influenced not only by the CO supply-demand relationship and electron competition between the two catalytic processes in the one-pot tandem system but also by the performance of the CO-to-C2 catalyst under diluted CO conditions.

Stabilizing Undercoordinated Zn Active Sites through Confinement in CeO2 Nanotubes for Efficient Electrochemical CO2 Reduction

Zn-based catalysts hold great potential to replace the noble metal-based ones for CO2 reduction reaction (CO2 RR). Undercoordinated Zn (Znδ+ ) sites may serve as the active sites for enhanced CO production by optimizing the binding energy of *COOH intermediates. However, there is relatively less exploration into the dynamic evolution and stability of Znδ+ sites during CO2 reduction process. Herein, we present ZnO, Znδ+ /ZnO and Zn as catalysts by varying the applied reduction potential. Theoretical studies reveal that Znδ+ sites could suppress HER and HCOOH production to induce CO generation. And Znδ+ /ZnO presents the highest CO selectivity (FECO 70.9 % at -1.48 V vs. RHE) compared to Zn and ZnO. Furthermore, we propose a CeO2 nanotube with confinement effect and Ce3+ /Ce4+ redox to stabilize Znδ+ species. The hollow core-shell structure of the Znδ+ /ZnO/CeO2 catalyst enables to extremely expose electrochemically active area while maintaining the Znδ+ sites with long-time stability. Certainly, the target catalyst affords a FECO of 76.9 % at -1.08 V vs. RHE and no significant decay of CO selectivity in excess of 18 h.

New Insight into the Electronic Effect for Cu Porphyrin Catalysts in Electrocatalytic of CO2 into CH4

Perturbation of the copper (Cu) active site by electron manipulation is a crucial factor in determining the activity and selectivity of electrochemical carbon dioxide (CO2 ) reduction reaction (e-CO2 RR) in Cu-based molecular catalysts. However, much ambiguity is present concerning their electronic structure-function relationships. Here, three molecular Cu-based porphyrin catalysts with different electron densities at the Cu active site, Cu tetrakis(4-methoxyphenyl)porphyrin (Cu─T(OMe)PP), Cu tetraphenylporphyrin (Cu─THPP), and Cu tetrakis(4-bromophenyl)porphyrin (Cu─TBrPP), are prepared. Although all three catalysts exhibit e-CO2 RR activity and the same reaction pathway, their performance is significantly affected by the electronic structure of the Cu site. Theoretical and experimental investigations verify that the conjugated effect of ─OCH3 and ─Br groups lowers the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbitals (LUMO) gap of Cu─T(OMe)PP and Cu─TBrPP, promoting faster electron transfer between Cu and CO2 , thereby improving their e-CO2 RR activity. Moreover, the high inductive effect of ─Br group reduces the electron density of Cu active site of Cu─TBrPP, facilitating the hydrolysis of the bound H2 O and thus creating a preferable local microenvironment, further enhancing the catalytic performance. This work provides new insights into the relationships between the substituent group characteristics with e-CO2 RR performance and is highly instructive for the design of efficient Cu-based e-CO2 RR electrocatalysts.

Pyrolysis-free synthesis of a high-loading single-atom Cu catalyst for efficient electrocatalytic CO2-to-CH4 conversion

Electrocatalytic CO2-to-CH4 conversion provides a promising means of addressing current carbon resource recycling and intermittent energy storage. Cu-based single-atom catalysts have attracted extensive attention owing to their high intrinsic activity toward CH4 production; however, they suffer from uncontrollable metal loading and aggregation during the conventional pyrolysis process of carbon-based substrates. Herein, we developed a pyrolysis-free method to prepare a single-atom Cu catalyst anchored on a formamide polymer substrate with a high loading amount and well atomic dispersion through a mild polycondensation reaction. Owing to the isolation of copper active sites, efficient CO2-to-CH4 conversion is achieved over the single-atom Cu catalyst, along with the significant suppression of C-C coupling. As a result, the optimal single-atom catalyst with 5.87 wt% of Cu offers high CH4 faradaic efficiencies (FEs) of over 70% in a wide current density range from 100 to 600 mA cm-2 in the flow cell, together with a maximum CH4 partial current density of 415.8 mA cm-2. Moreover, the CH4 FE can reach 74.2% under optimized conditions in a membrane electrode assembly electrolyzer. This work provides new insights into the subtle design of highly efficient electrocatalyst for CO2 reduction.

Co-NC@Co-NP hierarchical nanoforest steering charge exchange efficiency at biotic-abiotic interface for microbial electrochemical carbon reduction

Converting anthropogenic carbon dioxide (CO2) to value-added products using bio-electrochemical conversions represents a promising strategy for producing sustainable fuel. However, the reaction kinetics are hindered by insufficient attachment of microorganisms and limited charge extraction at the bioinorganic interface. A hierarchical nanoforest with doped cobalt‑nitrogen-doped carbon covering cobalt nanoparticle (Co-NC@Co-NP) was integrated with a CO2-to-CH4 conversion microbiome for methane production to address these shortcomings. In-situ nanoforests were developed on the nanosheet by chemical vapor deposition with Co nanoparticles catalyzed. The bio-nanowire-like carbon nanotubes enhanced the electrostatic force for microbe enrichment via the tip effect, providing a maximum of 3.6-fold electron-receiving microbes to utilize reducing equivalents. The Co-NC@Co-NP enhanced the direct electron transfer between microbes and electrodes, reducing the adoption of energy barriers for heme-like proteins. Thus, the optimized electron transfer pathway improved selectivity by a factor of 2.0 compared to the pristine nanosheet biohybrid. Furthermore, the adjusted microbial community structure provided sufficient methanogenesis genes to match the strong electron flow, achieving maximal methane production rates (311.1 mmol/m2/day at -0.9 V vs. Ag/AgCl), 8.62 times higher than those of the counterpart nanosheet biohybrid (36.06 mmol/m2/day). This work demonstrates a comprehensive assessment of biotic-abiotic energy transfer, which may serve as a guiding principle for designing efficient bio-electrochemical systems.

Unconventional Synthesis of Hierarchically Twinned Copper as Efficient Electrocatalyst for Nitrate-Ammonia Conversion

Twin boundary (TB) engineering provides exciting opportunities to tune the performance levels of metal-based electrocatalysts. However, the controllable construction of TB greatly relies on surfactants, blocking active sites, and electron transfer by surfactants. Here, a surfactant-free and facile strategy is proposed for synthesizing copper (Cu) nanocatalysts with dense hierarchical TB networks (HTBs) by the rapid thermal reductions in metastable CuO nanosheets in H2 . As revealed by in situ transmission electron microscopy, the formation of HTBs is associated with the fragmentation of nanosheets in different directions to generate abundant crystal nuclei and subsequently unconventional crystal growth through the collision and coalescence of nuclei. Impressively, the HTBs endow Cu with excellent electrocatalytic performance for direct nitrate-ammonia conversion, superior to that of Cu with a single-oriented TB and without TB. It is discovered that the HTBs induce the formation of compressive strains, thereby creating a synergistic effect of TBs and strains to efficiently tune the binding energies of Cu with nitrogen intermediates (i.e., NO2 *) and thus promote the tandem reaction process of NO3 - -to-NO2 - and subsequent NO2 - -to-NH3 electrocatalysis. This work demonstrates the crucial role of HTBs for boosting electrocatalysis via the synergistic effect of TBs and strains.

Favoring CO Intermediate Stabilization and Protonation by Crown Ether for CO2 Electromethanation in Acidic Media

The large-scale deployment of CO2 electroreduction is hampered by deficient carbon utilization in neutral and alkaline electrolytes due to CO2 loss into (bi)carbonates. Switching to acidic media mitigates carbonation, but suffers from low product selectivity because of hydrogen evolution. Here we report a crown ether decoration strategy on a Cu catalyst to enhance carbon utilization and selectivity of CO2 methanation under acidic conditions. Macrocyclic 18-Crown-6 is found to enrich potassium cations near the Cu electrode surface, simultaneously enhancing the interfacial electric field to stabilize the *CO intermediate and accelerate water dissociation to boost *CO protonation. Remarkably, the mixture of 18-Crown-6 and Cu nanoparticles affords a CH4 Faradaic efficiency of 51.2 % and a single pass carbon efficiency of 43.0 % toward CO2 electroreduction in electrolyte with pH=2. This study provides a facile strategy to promote CH4 selectivity and carbon utilization by modifying Cu catalysts with supramolecules.

Revealing the construction of CuOCe interfacial sites via increased support utilization for enhanced CO2 electroreduction and Li-CO2 batteries

Leveraging designed electronic oxide-metal interactions (EOMI), cerium-supported copper demonstrates remarkable competitiveness in the carbon dioxide reduction reaction (CO2RR). Nevertheless, the limited utilization efficiency of conventional cerium oxide (CeO2) support hampers the EOMI effect. Furthermore, a comprehensive understanding of the influence of distinct crystalline surfaces of CeO2 on the loaded active copper (Cu) species remains elusive. Herein, oxide carriers with diverse crystal facets are acquire for loading to load Cu species through the incorporation of cerium-based metal organic frameworks (MOFs) precursors. Simultaneously, owing to the elevated specific surface area conferred by MOF precursors, Cu/CeO2 hosts ample catalytically active sites for carbon dioxide (CO2) electrocatalytic reactions and as catalytic cathodes for lithium-CO2 (Li-CO2) batteries. Furthermore, the carbon converted from organic ligands in MOFs precursors not only proficiently immobilizes and disperses the active sites, but also enhances the inherent conductive stability of the oxide while augmenting energy utilization efficiency. Leveraging these advantages, the electrocatalyst derived from MOFs achieves a peak CO2-to-methane Faradaic efficiency of 57.9 %, whereas the assembled Li-CO2 batteries exhibit notable activity and durability, boasting a substantial full-discharge capacity of 8907 mAh/g, a discharge voltage of 2.65 V, and an extended cycle life exceeding 1000 h. Mechanistic investigations were conducted using density functional theory (DFT) calculations to thoroughly explore the impact of CeO2 carrier crystal facets, specifically (111), (100), and (110), on the loaded copper species. Notably, (110) was identified as the optimal facet due to its favorable contributions to electronic structure optimization and stability enhancement.

Direct OC-CHO coupling towards highly C2+ products selective electroreduction over stable Cu0/Cu2+ interface

Electroreduction of CO2 to valuable multicarbon (C2+) products is a highly attractive way to utilize and divert emitted CO2. However, a major fraction of C2+ selectivity is confined to less than 90% by the difficulty of coupling C-C bonds efficiently. Herein, we identify the stable Cu0/Cu2+ interfaces derived from copper phosphate-based (CuPO) electrocatalysts, which can facilitate C2+ production with a low-energy pathway of OC-CHO coupling verified by in situ spectra studies and theoretical calculations. The CuPO precatalyst shows a high Faradaic efficiency (FE) of 69.7% towards C2H4 in an H-cell, and exhibits a significant FEC2+ of 90.9% under industrially relevant current density (j = -350 mA cm-2) in a flow cell configuration. The stable Cu0/Cu2+ interface breaks new ground for the structural design of electrocatalysts and the construction of synergistic active sites to improve the activity and selectivity of valuable C2+ products.

Highly Stable Layered Coordination Polymer Electrocatalyst toward Efficient CO2 -to-CH4 Conversion

Cu2+ -based materials, a class of promising catalysts for the electrocatalytic carbon dioxide reduction reaction (CO2 RR) to value-added chemicals, usually undergo inevitable and uncontrollable reorganization processes during the reaction, resulting in catalyst deactivation or the new active sites formation and bringing great challenges to exploring their structure-performance relationships. Herein, a facile strategy is reported for constructing Cu2+ and 3, 4-ethylenedioxythiophene (EDOT) coordination to stabilize Cu2+ ions to prepare a novel layered coordination polymer (CuPEDOT). CuPEDOT enables selective reduction of CO2 to CH4 with 62.7% Faradaic efficiency at the current density of 354 mA cm-2 in a flow cell, and the catalyst is stable for at least 15 h. In situ spectroscopic characterization and theoretical calculations reveal that CuPEDOT catalyst can maintain the Cu2+ -EDOT coordination structurally stable in CO2 RR and significantly promote the further hydrogenation of *CO intermediates, favoring the formation of CH4 instead of dimerization to C2 products. The strong coordination between EDOT and Cu2+ prevents the reduction of Cu2+ ions during CO2 RR. The finding of this work provides a new perspective on designing molecularly stable, highly active catalysts for CO2 RR.

Accelerating multielectron reduction at CuxO nanograins interfaces with controlled local electric field

Regulating electron transport rate and ion concentrations in the local microenvironment of active site can overcome the slow kinetics and unfavorable thermodynamics of CO2 electroreduction. However, simultaneous optimization of both kinetics and thermodynamics is hindered by synthetic constraints and poor mechanistic understanding. Here we leverage laser-assisted manufacturing for synthesizing CuxO bipyramids with controlled tip angles and abundant nanograins, and elucidate the mechanism of the relationship between electron transport/ion concentrations and electrocatalytic performance. Potassium/OH- adsorption tests and finite element simulations corroborate the contributions from strong electric field at the sharp tip. In situ Fourier transform infrared spectrometry and differential electrochemical mass spectrometry unveil the dynamic evolution of critical *CO/*OCCOH intermediates and product profiles, complemented with theoretical calculations that elucidate the thermodynamic contributions from improved coupling at the Cu+/Cu2+ interfaces. Through modulating the electron transport and ion concentrations, we achieve high Faradaic efficiency of 81% at ~900 mA cm-2 for C2+ products via CO2RR. Similar enhancement is also observed for nitrate reduction reaction (NITRR), achieving 81.83 mg h-1 ammonia yield rate per milligram catalyst. Coupling the CO2RR and NITRR systems demonstrates the potential for valorizing flue gases and nitrate wastes, which suggests a practical approach for carbon-nitrogen cycling.