Photoactive Complexes with Earth-Abundant Metals

0D/1D CuWO4/Mn0.3Cd0.7S S-scheme heterojunctions for full-spectrum bifunctional photocatalytic degradation and hydrogen production

Integrating photocatalytic oxidation for pollutant removal with hydrogen production via photocatalysis presents a promising approach for sustainable water purification and renewable energy generation, circumventing the sluggish multi-electron transfer inherent in photocatalytic water oxidation. This study introduces novel zero-/one-dimensional (0D/1D) CuWO4/Mn0.3Cd0.7S step-scheme (S-scheme) heterojunctions that exhibit exceptional bifunctional capabilities in photocatalytic degradation and hydrogen production under full-spectrum illumination. The degradation efficiency for tetracycline (TC) using 5 %-CuWO4/Mn0.3Cd0.7S reaches 94.3 % and 94.5 % within 60 min and 6 h, respectively, under ultraviolet-visible (UV-Vis) and near-infrared (NIR) light. Notably, these 0D/1D CuWO4/Mn0.3Cd0.7S S-scheme heterojunctions demonstrate superior hydrogen production, achieving rates of 12442.03 μL g-1h-1 and 2418.54 μL g-1h-1 under UV-Vis light and NIR light irradiation, respectively-these rates are 2.3 times and 55.2 times higher than that of Mn0.3Cd0.7S alone. This performance enhancement is attributed to the intrinsic dimensional effects, transitions of transition metal d-d orbitals, and S-scheme hole/electron (h+/e-) separation characteristics. Additionally, experimental results and density functional theory (DFT) calculations have clarified the modulation of electronic configurations, band alignment, and interfacial interactions via 0D/1D S-scheme heterojunction engineering. This study sheds light on the electron transfer mechanism within S-scheme heterojunction and enhances the effectiveness, economy, and sustainability of recalcitrant pollutant removal and hydrogen production.

Toward the improvement of vibronic spectra and non-radiative rate constants using the vertical Hessian method

For the computation of vibrationally resolved electronic spectra, various approaches can be employed. Adiabatic approaches simulate vibronic transitions using harmonic potentials of the initial and final states, while vertical approaches extrapolate the final state potential from the gradients and Hessian at the Franck-Condon point, avoiding a full exploration of the potential energy surface of the final state. Our implementation of the vertical Hessian (VH) method has been validated with a benchmark set of four small molecules, each presenting unique challenges, such as complex topologies, problematic low-frequency vibrations, or significant geometrical changes upon electronic excitation. We assess the quality of both adiabatic and vertical approaches for simulating vibronic transitions. For two types of donor-acceptor compounds with promising thermally activated delayed fluorescence properties, our computations confirm that the vertical approaches outperform the adiabatic ones. The VH method significantly reduces computational costs and yields meaningful emission spectra, where adiabatic models fail. More importantly, we pioneer the use of the VH method for the computation of rate constants for non-radiative processes, such as intersystem crossing and reverse intersystem crossing along a relaxed interpolated pathway of a donor-acceptor compound. This study highlights the potential of the VH method to advance computational vibronic spectroscopy by providing meaningful simulations of intricate decay pathway mechanisms in complex molecular systems.

Enter MnIV-NHC: A Dark Photooxidant with a Long-Lived Charge-Transfer Excited State

Detailed photophysical investigation of a Mn(IV)-carbene complex has revealed that excitation into its lowest-energy absorption band (∼500 nm) results in the formation of an energetic ligand-to-metal charge-transfer (LMCT) state with a lifetime of 15 ns. To the best of our knowledge, this is the longest lifetime reported for charge-transfer states of first-row-based transition metal complexes in solution, barring those based on Cu, with a d10 configuration. A so-called superoxidant, Mn(IV)-carbene exhibits an excited state potential typically only harnessed via excited states of reactive organic radical species. Furthermore, the long-lived excited state in this case is found to be a dark doublet, with its transition to the quartet ground state being spin-forbidden, a contrast to most first-row literature examples, and a possible cause of the long lifetime. Showcasing excited state properties which in some cases exceed those of complexes based on precious metals, these findings not only advance the library of earth-abundant photosensitizers but also shed general insight into the photophysics of d3 and related Mn complexes.

Manganese Complexes with Consecutive Mn(IV) → Mn(III) Excitation for Versatile Photoredox Catalysis

Manganese complexes stand out as promising candidates for photocatalyst design, attributed to their eco- and biocompatibility, versatile valence states, and capability for facilitating multiple electronic excitations. However, several intrinsic constraints, such as inadequate visible light response and short excited-state lifetimes, hinder effective photoinduced electron transfer and impede photoredox activation of substrates. To overcome this obstacle, we have developed a class of manganese complexes featuring boron-incorporated N-heterocyclic carbene ligands. These complexes enable prolonged excited-state durations encapsulating both Mn(IV) and Mn(III) oxidation stages, with lifetimes reaching microseconds for Mn(IV) and nanoseconds for Mn(III), concurrently exhibiting robust redox capabilities. They efficiently catalyze direct, site-selective cross-couplings between diverse arenes and aryl bromides, at a low catalyst loading of 0.5 mol %. Their proficiency spans an extensive array of substrates including both highly electron-rich and electron-deficient molecules, which underscore the superior performance of these manganese complexes in tackling intricate transformations. Furthermore, the versatility of these complexes is further highlighted by their successful applications in various photochemical transformations, encompassing reductive cross-couplings for the formation of C-P, C-B, C-S and C-Se bonds, alongside oxidative couplings for creating C-N bonds. This study sheds light on the distinctive photoredox properties and the remarkable catalytic flexibility of manganese complexes, highlighting their immense potential to drive progress in photochemical synthesis and green chemistry applications.

Efficient Energy and Electron Transfer Photocatalysis with a Coulombic Dyad

Photocatalysis holds great promise for changing the way value-added molecules are currently prepared. However, many photocatalytic reactions suffer from quantum yields well below 10%, hampering the transition from lab-scale reactions to large-scale or even industrial applications. Molecular dyads can be designed such that the beneficial properties of inorganic and organic chromophores are combined, resulting in milder reaction conditions and improved reaction quantum yields of photocatalytic reactions. We have developed a novel approach for obtaining the advantages of molecular dyads without the time- and resource-consuming synthesis of these tailored photocatalysts. Simply by mixing a cationic ruthenium complex with an anionic pyrene derivative in water a salt bichromophore is produced owing to electrostatic interactions. The long-lived organic triplet state is obtained by static and quantitative energy transfer from the preorganized ruthenium complex. We exploited this so-called Coulombic dyad for energy transfer catalysis with similar reactivity and even higher photostability compared to a molecular dyad and reference photosensitizers in several photooxygenations. In addition, it was shown that this system can also be used to maximize the quantum yield of photoredox reactions. This is due to an intrinsically higher cage escape quantum yield after photoinduced electron transfer for purely organic compounds compared to heavy atom-containing molecules. The combination of laboratory-scale as well as mechanistic irradiation experiments with detailed spectroscopic investigations provided deep mechanistic insights into this easy-to-use photocatalyst class.

Exploring the Potential of Al(III) Photosensitizers for Energy Transfer Reactions

Three homoleptic Al(III) complexes (Al1-Al3) with different degrees of methylation at the 2-pyridylpyrrolide ligand were systematically tested for their function as photosensitizers (PS) in two types of energy transfer reactions. First, in the generation of reactive singlet oxygen (1O2), and second, in the isomerization of (E)- to (Z)-stilbene. 1O2 was directly evidenced by its characteristic NIR emission at around 1276 nm and indirectly by the reaction with an organic substrate [e.g. 2,5-diphenylfuran (DPF)] using in situ UV/vis spectroscopy. In a previous study, the presence of additional methyl groups was found to be beneficial for the photocatalytic reduction of CO2 to CO, but here Al1 without any methyl groups exhibits superior performance. To rationalize this behavior, a combination of photophysical experiments (absorption, emission and excited state lifetimes) together with photostability measurements and scalar-relativistic time-dependent density functional theory calculations was applied. As a result, Al1 exhibited the highest emission quantum yield (64%), the longest emission lifetime (8.7 ns) and the best photostability under the reaction conditions required for the energy transfer reactions (e.g. in aerated chloroform). Moreover, Al1 provided the highest rate constant (0.043 min-1) for the photocatalytic oxygenation of DPF, outperforming even noble metal-based competitors such as [Ru(bpy)3]2+. Finally, its superior photostability enabled a long-term test (7 h), in which Al1 was successfully recycled seven times, underlining the high potential of this new class of earth-abundant PSs.

Challenges and Future Perspectives in Photocatalysis: Conclusions from an Interdisciplinary Workshop

Photocatalysis is a versatile and rapidly developing field with applications spanning artificial photosynthesis, photo-biocatalysis, photoredox catalysis in solution or supramolecular structures, utilization of abundant metals and organocatalysts, sustainable synthesis, and plastic degradation. In this Perspective, we summarize conclusions from an interdisciplinary workshop of young principal investigators held at the Lorentz Center in Leiden in March 2023. We explore how diverse fields within photocatalysis can benefit from one another. We delve into the intricate interplay between these subdisciplines, by highlighting the unique challenges and opportunities presented by each field and how a multidisciplinary approach can drive innovation and lead to sustainable solutions for the future. Advanced collaboration and knowledge exchange across these domains can further enhance the potential of photocatalysis. Artificial photosynthesis has become a promising technology for solar fuel generation, for instance, via water splitting or CO2 reduction, while photocatalysis has revolutionized the way we think about assembling molecular building blocks. Merging such powerful disciplines may give rise to efficient and sustainable protocols across different technologies. While photocatalysis has matured and can be applied in industrial processes, a deeper understanding of complex mechanisms is of great importance to improve reaction quantum yields and to sustain continuous development. Photocatalysis is in the perfect position to play an important role in the synthesis, deconstruction, and reuse of molecules and materials impacting a sustainable future. To exploit the full potential of photocatalysis, a fundamental understanding of underlying processes within different subfields is necessary to close the cycle of use and reuse most efficiently. Following the initial interactions at the Lorentz Center Workshop in 2023, we aim to stimulate discussions and interdisciplinary approaches to tackle these challenges in diverse future teams.

Real-time capture of nuclear motions influencing photoinduced electron transfer

Although vibronic coupling phenomena have been recognized in the excite state dynamics of transition metal complexes, its impact on photoinduced electron transfer (PET) remains largely unexplored. This study investigates coherent wavepacket (CWP) dynamics during PET processes in a covalently linked electron donor-acceptor complex featuring a cyclometalated Pt(ii) dimer as the donor and naphthalene diimide (NDI) as the acceptors. Upon photoexciting the Pt(ii) dimer electron donor, ultrafast broadband transient absorption spectroscopy revealed direct modulation of NDI radical anion formation through certain CWP motions and correlated temporal evolutions of the amplitudes for these CWPs with the NDI radical anion formation. These results provide clear evidence that the CWP motions are the vibronic coherences coupled to the PET reaction coordinates. Normal mode analysis identified that the CWP motions originate from vibrational modes associated with the dihedral angles and bond lengths between the planes of the cyclometalating ligand and the NDI, the key modes altering their π-interaction, consequently influencing PET dynamics. The findings highlight the pivotal role of vibrations in shaping the favorable trajectories for the efficient PET processes.

Dual Emission with Efficient Phosphorescence Promoted by Intermolecular Halogen Interactions in Luminescent Tetranuclear Zinc(II) Clusters

The development of Zn-based phosphorescent materials, associated with a ligand-centered (LC) transition, is extremely limited. Herein, we demonstrated dual emissions including fluorescence and phosphorescence in luminescent tetranuclear Zn(II) clusters [Zn4LI4(μ3-OMe)2X2] (HLI = methyl-5-iode-3-methoxysalicylate; X = I, Br, Cl), incorporating iodine-substituted ligands. Single-crystal X-ray structural analyses and variable-temperature emission spectra studies revealed the presence of iodine substitutions, and intermolecular halogen interactions produced the internal/external heavy-atom effects and yielded strong green phosphorescence with a long emission lifetime (λmax = 510-522 nm, Φem = 0.28-0.47, τav = 0.78-0.95 ms, at 77 K). This work provided a new example that the introduction of halogen interactions is an advantageous approach for inducing phosphorescence in fluorescent metal complexes.

Coherent spin-control of S = 1 vanadium and molybdenum complexes

The burgeoning field of quantum sensing hinges on the creation and control of quantum bits. To date, the most well-studied quantum sensors are optically active, paramagnetic defects residing in crystalline hosts. We previously developed analogous optically addressable molecules featuring a ground-state spin-triplet centered on a Cr4+ ion with an optical-spin interface. In this work, we evaluate isovalent V3+ and Mo4+ congeners, which offer unique advantages, such as an intrinsic nuclear spin for V3+ or larger spin-orbit coupling for Mo4+, as optically addressable spin systems. We assess the ground-state spin structure and dynamics for each complex, illustrating that all of these spin-triplet species can be coherently controlled. However, unlike the Cr4+ derivatives, these pseudo-tetrahedral V3+ and Mo4+ complexes exhibit no measurable emission. Coupling absorption spectroscopy with computational predictions, we investigate why these complexes exhibit no detectable photoluminescence. These cumulative results suggest that design of future V3+ complexes should target pseudo-tetrahedral symmetries using bidentate or tridentate ligand scaffolds, ideally with deuterated or fluorinated ligand environments. We also suggest that spin-triplet Mo4+, and by extension W4+, complexes may not be suitable candidate optically addressable qubit systems due to their low energy spin-singlet states. By understanding the failures and successes of these systems, we outline additional design features for optically addressable V- or Mo-based molecules to expand the library of tailor-made quantum sensors.

Beyond the First Coordination Sphere─Manipulating the Excited-State Landscape in Iron(II) Chromophores with Protons

Molecular transition metal chromophores play a central role in light harvesting and energy conversion. Recently, earth-abundant transition-metal-based chromophores have begun to challenge the dominance of platinum group metal complexes in this area. However, the development of new chromophores with optimized photophysical properties is still limited by a lack of synthetic methods, especially with respect to heteroleptic complexes with functional ligands. Here, we demonstrate a facile and efficient method for the combination of strong-field carbenes with the functional 2,2'-bibenzimidazole ligand in a heteroleptic iron(II) chromophore complex. Our approach yields two isomers that differ predominantly in their excited-state lifetimes based on the symmetry of the ligand field. Deprotonation of both isomers leads to a significant red-shift of the metal-to-ligand charge transfer (MLCT) absorption and a shortening of excited-state lifetimes. Femtosecond transient absorption spectroscopy in combination with quantum chemical simulations and resonance Raman spectroscopy reveals the complex relationship between protonation and photophysical properties. Protonation is found to tip the balance between MLCT and metal-centered (MC) excited states in favor of the former. This study showcases the first example of fine-tuning of the excited-state landscape in an iron(II) chromophore through second-sphere manipulations and provides a new perspective to the challenge of excited-state optimizations in 3d transition metal chromophores.

Iron-Catalyzed, Light-Driven Decarboxylative Alkoxyamination

An iron-catalyzed visible-light driven decarboxylative alkoxyamination is disclosed. In the presence of FeBr2 and TEMPO, a large array of carboxylic acids including marketed drugs and biobased molecules is turned into the corresponding alkoxyamine derivatives. The versatility of the latter offers an entry towards molecular diversity generation from abundant starting materials and catalyst. Overall, this method proposes a unified and general approach for LMCT-based iron-catalyzed decarboxylative functionalization.

Thermally Activated Delayed Fluorescence (TADF) Materials Based on Earth-Abundant Transition Metal Complexes: Synthesis, Design and Applications

Materials exhibiting thermally activated delayed fluorescence (TADF) based on transition metal complexes are currently gathering significant attention due to their technological potential. Their application extends beyond optoelectronics, in particular organic light-emitting diodes (OLEDs) and light-emitting electrochemical cells (LECs), and include also photocatalysis, sensing, and X-ray scintillators. From the perspective of sustainability, earth-abundant metal centers are preferred to rarer second- and third-transition series elements, thus determining a reduction in costs and toxicity but without compromising the overall performances. This review offers an overview of earth-abundant transition metal complexes exhibiting TADF and their application as photoconversion materials. Particular attention is devoted to the types of ligands employed, helping in the design of novel systems with enhanced TADF properties.

Cobalt-Mediated Photochemical C-H Arylation of Pyrroles

Precious metal complexes remain ubiquitous in photoredox catalysis (PRC) despite concerted efforts to find more earth-abundant catalysts and replacements based on 3d metals in particular. Most otherwise plausible 3d metal complexes are assumed to be unsuitable due to short-lived excited states, which has led researchers to prioritize the pursuit of longer excited-state lifetimes through careful molecular design. However, we report herein that the C-H arylation of pyrroles and related substrates (which are benchmark reactions for assessing the efficacy of photoredox catalysts) can be achieved using a simple and readily accessible octahedral bis(diiminopyridine) cobalt complex, [1-Co](PF6)2. Notably, [1-Co]2+ efficiently functionalizes both chloro- and bromoarene substrates despite the short excited-state lifetime of the key photoexcited intermediate *[1-Co]2+ (8 ps). We present herein the scope of this C-H arylation protocol and provide mechanistic insights derived from detailed spectroscopic and computational studies. These indicate that, despite its transient existence, reduction of *[1-Co]2+ is facilitated via pre-assembly with the NEt3 reductant, highlighting an alternative strategy for the future development of 3d metal-catalyzed PRC.

Time-Resolved X-ray Emission Spectroscopy and Synthetic High-Spin Model Complexes Resolve Ambiguities in Excited-State Assignments of Transition-Metal Chromophores: A Case Study of Fe-Amido Complexes

To fully harness the potential of abundant metal coordination complex photosensitizers, a detailed understanding of the molecular properties that dictate and control the electronic excited-state population dynamics initiated by light absorption is critical. In the absence of detectable luminescence, optical transient absorption (TA) spectroscopy is the most widely employed method for interpreting electron redistribution in such excited states, particularly for those with a charge-transfer character. The assignment of excited-state TA spectral features often relies on spectroelectrochemical measurements, where the transient absorption spectrum generated by a metal-to-ligand charge-transfer (MLCT) electronic excited state, for instance, can be approximated using steady-state spectra generated by electrochemical ligand reduction and metal oxidation and accounting for the loss of absorptions by the electronic ground state. However, the reliability of this approach can be clouded when multiple electronic configurations have similar optical signatures. Using a case study of Fe(II) complexes supported by benzannulated diarylamido ligands, we highlight an example of such an ambiguity and show how time-resolved X-ray emission spectroscopy (XES) measurements can reliably assign excited states from the perspective of the metal, particularly in conjunction with accurate synthetic models of ligand-field electronic excited states, leading to a reinterpretation of the long-lived excited state as a ligand-field metal-centered quintet state. A detailed analysis of the XES data on the long-lived excited state is presented, along with a discussion of the ultrafast dynamics following the photoexcitation of low-spin Fe(II)-Namido complexes using a high-spin ground-state analogue as a spectral model for the 5T2 excited state.

Efficient Ultraviolet Circularly Polarized Luminescence in Zero-Dimensional Hybrid Cerium Bromides

Ultraviolet circularly polarized luminescence (UV-CPL) with high photon energy shows great potential in polarized light sources and stereoselective photopolymerization. However, developing luminescent materials with high UV-CPL performance remains challenging. Here, we report a pair of rare earth Ce3+-based zero-dimensional (0D) chiral hybrid metal halides (HMHs), R/S-(C14H24N2)2CeBr7, which exhibits characteristic UV emissions derived from the Ce 5d-4f transition. The compounds show simultaneously high photoluminescent quantum yields of (32-39)% and large luminescent dissymmetry factor (|glum|) values of (1.3-1.5)×10-2. Thus, the figures of merits of R/S-(C14H24N2)2CeBr7 are calculated to be (4.5-5.8)×10-3, which are superior to the reported UV-CPL emissive materials. Additionally, nearly 91 % of their PL intensities at 300 K can be well preserved at 380 K (LED operating temperature) without phase transition or decomposition, demonstrating the excellent structural and optical thermal stabilities of R/S-(C14H24N2)2CeBr7. Based on these enantiomers, the fabricated UV-emitting CP-LEDs exhibit high polarization degrees of ±1.0 %. Notably, the UV-CPL generated from the devices can significantly trigger the enantioselective photopolymerization of diacetylene with remarkable stereoselectivity, and consequently yield polymerized products with the anisotropy factors of circular dichroism (gCD) up to ±3.9×10-2, outperforming other UV-CPL materials and demonstrating their great potential as UV-polarized light sources.

Iron-catalyzed decarboxylative radical addition to chiral azomethine imines upon visible light

Herein, we disclose an eco-efficient redox-neutral iron-catalyzed decarboxylative radical addition to chiral azomethine imines upon visible light (427 nm) giving cyclic hydrazine derivatives with dr ranging from 82 : 18 to >96 : 4. This earth-abundant metal promoted sequence proceeds efficiently under ligand-free conditions based on a LMCT process and opens a route to new chiral heterocycles.

Factors that Impact Photochemical Cage Escape Yields

The utilization of visible light to mediate chemical reactions in fluid solutions has applications that range from solar fuel production to medicine and organic synthesis. These reactions are typically initiated by electron transfer between a photoexcited dye molecule (a photosensitizer) and a redox-active quencher to yield radical pairs that are intimately associated within a solvent cage. Many of these radicals undergo rapid thermodynamically favored "geminate" recombination and do not diffuse out of the solvent cage that surrounds them. Those that do escape the cage are useful reagents that may undergo subsequent reactions important to the above-mentioned applications. The cage escape process and the factors that determine the yields remain poorly understood despite decades of research motivated by their practical and fundamental importance. Herein, state-of-the-art research on light-induced electron transfer and cage escape that has appeared since the seminal 1972 review by J. P. Lorand entitled "The Cage Effect" is reviewed. This review also provides some background for those new to the field and discusses the cage escape process of both homolytic bond photodissociation and bimolecular light induced electron transfer reactions. The review concludes with some key goals and directions for future research that promise to elevate this very vibrant field to even greater heights.

Earth-abundant Zn-dipyrrin chromophores for efficient CO2 photoreduction

The development of strong sensitizing and Earth-abundant antenna molecules is highly desirable for CO2 reduction through artificial photosynthesis. Herein, a library of Zn-dipyrrin complexes (Z-1-Z-6) are rationally designed via precisely controlling their molecular configuration to optimize strong sensitizing Earth-abundant photosensitizers. Upon visible-light excitation, their special geometry enables intramolecular charge transfer to induce a charge-transfer state, which was first demonstrated to accept electrons from electron donors. The resulting long-lived reduced photosensitizer was confirmed to trigger consecutive intermolecular electron transfers for boosting CO2-to-CO conversion. Remarkably, the Earth-abundant catalytic system with Z-6 and Fe-catalyst exhibits outstanding performance with a turnover number of >20 000 and 29.7% quantum yield, representing excellent catalytic performance among the molecular catalytic systems and highly superior to that of noble-metal photosensitizer Ir(ppy)2(bpy)+ under similar conditions. Experimental and theoretical investigations comprehensively unveil the structure-activity relationship, opening up a new horizon for the development of Earth-abundant strong sensitizing chromophores for boosting artificial photosynthesis.

Photocatalytic α-arylation of cyclic ketones by a thermally activated delayed fluorescence molecule

α-Arylation of cyclic ketones via an organophotocatalytic route has been described utilizing PXZ-TRZ, a molecule displaying thermally activated delayed fluorescence (TADF). Using this route, a plethora of cyclic ketones including cyclohexanone, cyclopentanone and even cyclooctanone can be effectively arylated with many aryl iodides or bromides under mild conditions.

Frozen Natural Orbitals for the State-Averaged Driven Similarity Renormalization Group

We present a reduced-cost implementation of the state-averaged driven similarity renormalization group (SA-DSRG) based on the frozen natural orbital (FNO) approach. The natural orbitals (NOs) are obtained by diagonalizing the one-body reduced density matrix from SA-DSRG second-order perturbation theory (SA-DSRG-PT2). We consider three criteria to truncate the virtual NOs for the subsequent electron correlation treatment beyond SA-DSRG-PT2. An additive second-order correction is applied to the SA-DSRG Hamiltonian to reintroduce correlation effects from the discarded orbitals. The FNO SA-DSRG method is benchmarked on 35 small organic molecules in the QUEST database. When keeping 98-99% of the cumulative occupation numbers, the mean absolute error in the vertical transition energies due to FNO is less than 0.01 eV. Using the same FNO threshold, we observe a speedup of 9 times compared to the conventional SA-DSRG implementation for nickel carbonyl with a quadruple-ζ basis set. The FNO approach enables nonperturbative SA-DSRG computations on chloroiron corrole [FeCl(C19H11N4)] with more than 1000 basis functions, surpassing the current limit of a conventional implementation.

Photophysical Studies of a Zr(IV) Complex with Two Pyrrolide-Based Tetradentate Schiff Base Ligands

The reaction of two equivalents of N,N'-bis(2-pyrrolylmethylidene)-1,2-phenylenediamine (H2bppda) with tetrabenzylzirconium provided the air- and moisture-stable eight-coordinate complex Zr(bppda)2. Temperature-dependent steady-state and time-resolved emission spectroscopy established weak photoluminescence (ΦPL = 0.4% at 293 K) by a combination of prompt fluorescence and thermally activated delayed fluorescence (TADF) upon visible light excitation at and around room temperature. TADF emission is strongly quenched by 3O2 and shows highly temperature-sensitive emission lifetimes of hundreds of microseconds. The lifetime of the lowest energy singlet excited state, S1, was established by transient absorption spectroscopy and shows rapid deactivation (τ = 142 ps) by prompt fluorescence and intersystem crossing to the triplet state, T1. Time-dependent density functional theory (TD-DFT) calculations predict moderate ligand-to-metal charge transfer (LMCT) contributions of 25-30% for the S1 and T1 states. A comparison of Zr(bppda)2 to related zirconium pyridine dipyrrolide complexes, Zr(PDP)2, revealed important electronic structure changes due to the eight-coordinate ligand environment in Zr(bppda)2, which were correlated to differences in the photophysical properties between the two compound classes.

Efficient wide-spectrum one-dimensional MWO4 (M = Mn, Co, and Cd) photocatalysts: Synthesis, characterization and density functional theory study

Broadening the absorption region to near-infrared (NIR) light is critical for the photocatalysis due to the larger proportion and stronger penetration of NIR light in solar energy. In the present paper, one-dimensional (1D) MWO4 (M = Mn, Co, and Cd) materials synthesized by electrospinning technique, were studied by combining the density functional theory (DFT) with experiment results, which possessed the enhanced light absorption capability within the range of 200-2000 nm. It was proved that in the ultraviolet-visible (UV-Vis) region, the absorption bands of CoWO4 and MnWO4 samples were attributed to the metal-to-metal charge transfer mechanism, while the absorption of CdWO4 sample may be referable to the ligand-to-metal charge transfer mechanism. In the near-infrared (NIR) region, the absorption of CoWO4 and MnWO4 primarily originated from the d-d orbital transitions of Mn2+ and Co2+. The photocatalytic experimental results showed that the degradation rates for bisphenol A (BPA) over CoWO4, MnWO4, and CdWO4 photocatalysts under UV-Vis/NIR light irradiation for 140 min/12 h were 78.8 %/75.9 %, 23.8 %/21.3 %, 12.8 %/8.7 %, respectively. This research offers the novel insights into the precise construction of tungstate catalytic systems and contributes to the advancement of UV-Vis-NIR full spectrum photocatalytic technology, and lays a foundation for a cleaner and more environmental-friendly future.

Mechanoresponsive luminescence triggered by phase transition of a supercooled copper(I) complex

Under mechanical stimulation, a copper(I) complex in its supercooled liquid state transforms into a crystalline phase, showing a dramatic emission color change from red to green that is accompanied by a 20-fold increase in the photoluminescence quantum yield up to 87%. This reversible phase transition relies on the intriguing ability of this copper complex to form a supercooled metastable state.

A new era of LMCT: leveraging ligand-to-metal charge transfer excited states for photochemical reactions

Ligand-to-metal charge transfer (LMCT) excited states are capable of undergoing a wide array of photochemical reactions, yet receive minimal attention compared to other charge transfer excited states. This work provides general criteria for designing transition metal complexes that exhibit low energy LMCT excited states and routes to drive photochemistry from these excited states. General design principles regarding metal identity, oxidation state, geometry, and ligand sets are summarized. Fundamental photoreactions from these states including visible light-induced homolysis, excited state electron transfer, and other photoinduced chemical transformations are discussed and key design principles for enabling these photochemical reactions are further highlighted. Guided by these fundamentals, this review outlines critical considerations for the future design and application of coordination complexes with LMCT excited states.

Oxidative two-state photoreactivity of a manganese(IV) complex using near-infrared light

Highly reducing or oxidizing photocatalysts are a fundamental challenge in photochemistry. Only a few transition metal complexes with Earth-abundant metal ions have so far advanced to excited state oxidants. All these photocatalysts require high-energy light for excitation, and their oxidizing power has not been fully exploited due to energy dissipation before reaching the photoactive state. Here we demonstrate that the complex [Mn(dgpy)2]4+, based on Earth-abundant manganese and the tridentate 2,6-diguanidylpyridine ligand (dgpy), evolves to a luminescent doublet ligand-to-metal charge transfer (2LMCT) excited state (1,435 nm, 0.86 eV) with a lifetime of 1.6 ns after excitation with low-energy near-infrared light. This 2LMCT state oxidizes naphthalene to its radical cation. Substrates with extremely high oxidation potentials up to 2.4 V enable the [Mn(dgpy)2]4+ photoreduction via a high-energy quartet 4LMCT excited state with a lifetime of 0.78 ps, proceeding via static quenching by the solvent. This process minimizes free energy losses and harnesses the full photooxidizing power, and thus allows oxidation of nitriles and benzene using Earth-abundant elements and low-energy light.

Activating the Fluorescence of a Ni(II) Complex by Energy Transfer

Luminescence of open-shell 3d metal complexes is often quenched due to ultrafast intersystem crossing (ISC) and cooling into a dark metal-centered excited state. We demonstrate successful activation of fluorescence from individual nickel phthalocyanine (NiPc) molecules in the junction of a scanning tunneling microscope (STM) by resonant energy transfer from other metal phthalocyanines at low temperature. By combining STM, scanning tunneling spectroscopy, STM-induced luminescence, and photoluminescence experiments as well as time-dependent density functional theory, we provide evidence that there is an activation barrier for the ISC, which, in most experimental conditions, is overcome. We show that this is also the case in an electroluminescent tunnel junction where individual NiPc molecules adsorbed on an ultrathin NaCl decoupling film on a Ag(111) substrate are probed. However, when an MPc (M = Zn, Pd, Pt) molecule is placed close to NiPc by means of STM atomic manipulation, resonant energy transfer can excite NiPc without overcoming the ISC activation barrier, leading to Q-band fluorescence. This work demonstrates that the thermally activated population of dark metal-centered states can be avoided by a designed local environment at low temperatures paired with directed molecular excitation into vibrationally cold electronic states. Thus, we can envisage the use of luminophores based on more abundant transition metal complexes that do not rely on Pt or Ir by restricting vibration-induced ISC.

Unraveling the Prominent Existence of Trace Metals in Photocatalysis: Exploring Iron Impurity Effects

Metal impurities can complicate the identification of active catalyst species in transition metal catalysis and electrocatalysis, potentially leading to misleading findings. This study investigates the influence of metal impurities on photocatalysis. Specifically, the photocatalytic reaction of inert alkanes using chlorides without the use of an external photocatalyst was studied, achieving successful C(sp3)-H functionalization. The observations reveal that Fe and Cu impurities are challenging to avoid in a typical laboratory environment and are prominently present in normal reaction systems, and iron impurities play a dominant role in the aforementioned apparent 'metal-free' reaction. Additionally, iron exhibits significantly higher catalytic activity compared to Cu, Ce, and Ni at low metal concentrations in the photocatalytic C(sp3)-H functionalization using chlorides. Considering the widespread presence of Fe and Cu impurities in typical laboratory environments, this study serves as a reminder of their involvement in reaction processes.

How Rigidity and Conjugation of Bidentate Ligands Affect the Geometry and Photophysics of Iron N-Heterocyclic Complexes: A Comparative Study

Two iron complexes featuring the bidentate, nonconjugated N-heterocyclic carbene (NHC) 1,1'-methylenebis(3-methylimidazol-2-ylidene) (mbmi) ligand, where the two NHC moieties are separated by a methylene bridge, have been synthesized to exploit the combined influence of geometric and electronic effects on the ground- and excited-state properties of homoleptic FeIII-hexa-NHC [Fe(mbmi)3](PF6)3 and heteroleptic FeII-tetra-NHC [Fe(mbmi)2(bpy)](PF6)2 (bpy = 2,2'-bipyridine) complexes. They are compared to the reported FeIII-hexa-NHC [Fe(btz)3](PF6)3 and FeII-tetra-NHC [Fe(btz)2(bpy)](PF6)2 complexes containing the conjugated, bidentate mesoionic NHC ligand 3,3'-dimethyl-1,1'-bis(p-tolyl)-4,4'-bis(1,2,3-triazol-5-ylidene) (btz). The observed geometries of [Fe(mbmi)3](PF6)3 and [Fe(mbmi)2(bpy)](PF6)2 are evaluated through L-Fe-L bond angles and ligand planarity and compared to those of [Fe(btz)3](PF6)3 and [Fe(btz)2(bpy)](PF6)2. The FeII/FeIII redox couples of [Fe(mbmi)3](PF6)3 (-0.38 V) and [Fe(mbmi)2(bpy)](PF6)2 (-0.057 V, both vs Fc+/0) are less reducing than [Fe(btz)3](PF6)3 and [Fe(btz)2(bpy)](PF6)2. The two complexes show intense absorption bands in the visible region: [Fe(mbmi)3](PF6)3 at 502 nm (ligand-to-metal charge transfer, 2LMCT) and [Fe(mbmi)2(bpy)](PF6)2 at 410 and 616 nm (metal-to-ligand charge transfer, 3MLCT). Lifetimes of 57.3 ps (2LMCT) for [Fe(mbmi)3](PF6)3 and 7.6 ps (3MLCT) for [Fe(mbmi)2(bpy)](PF6)2 were probed and are somewhat shorter than those for [Fe(btz)3](PF6)3 and [Fe(btz)2(bpy)](PF6)2. [Fe(mbmi)3](PF6)3 exhibits photoluminescence at 686 nm (2LMCT) in acetonitrile at room temperature with a quantum yield of (1.2 ± 0.1) × 10-4, compared to (3 ± 0.5) × 10-4 for [Fe(btz)3](PF6)3.

Luminescent and Photoredox-Active Molybdenum(0) Complexes Competitive with Isoelectronic Ruthenium(II) Polypyridines

Ruthenium(II) complexes with chelating polypyridine ligands are among the most frequently investigated compounds in photophysics and photochemistry, owing to their favorable luminescence and photoredox properties. Equally good photoluminescence performance and attractive photocatalytic behavior is now achievable with isoelectronic molybdenum(0) complexes. The zero-valent oxidation state of molybdenum is stabilized by carbonyl or isocyanide ligands, and metal-to-ligand charge transfer (MLCT) excited states analogous to those in ruthenium(II) complexes can be established. Microsecond MLCT excited-state lifetimes and photoluminescence quantum yields up to 0.2 have been achieved in solution at room temperature, and the emission wavelength has become tunable over a large range. The molybdenum(0) complexes are stronger photoreductants than ruthenium(II) polypyridines and can therefore perform more challenging chemical reductions. The triplet nature of their luminescent MLCT states allows sensitization of photon upconversion via triplet-triplet annihilation, to convert low-energy input radiation into higher-energy output fluorescence. This review summarizes the current state of the art concerning luminescent molybdenum(0) complexes and highlights their application potential. Molybdenum is roughly 140 times more abundant and far cheaper than ruthenium, hence this research is relevant in the greater context of finding more sustainable alternatives to using precious and rare transition metals in photophysics and photochemistry.

Photoredox matching of earth-abundant photosensitizers with hydrogen evolving catalysts by first-principles predictions

Photoredox properties of several earth-abundant light-harvesting transition metal complexes in combination with cobalt-based proton reduction catalysts have been investigated computationally to assess the fundamental viability of different photocatalytic systems of current experimental interest. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations using several GGA (BP86, BLYP), hybrid-GGA (B3LYP, B3LYP*), hybrid meta-GGA (M06, TPSSh), and range-separated hybrid (ωB97X, CAM-B3LYP) functionals were used to calculate relevant ground and excited state reduction potentials for photosensitizers, catalysts, and sacrificial electron donors. Linear energy correction factors for the DFT/TD-DFT results that provide the best agreement with available experimental reference results were determined in order to provide more accurate predictions. Among the selection of functionals, the B3LYP* and TPSSh sets of correction parameters were determined to give the best redox potentials and excited states energies, ΔEexc, with errors of ∼0.2 eV. Linear corrections for both reduction and oxidation processes significantly improve the predictions for all the redox pairs. In particular, for TPSSh and B3LYP*, the calculated errors decrease by more than 0.5 V against experimental values for catalyst reduction potentials, photosensitizer oxidation potentials, and electron donor oxidation potentials. Energy-corrected TPSSh results were finally used to predict the energetics of complete photocatalytic cycles for the light-driven activation of selected proton reduction cobalt catalysts. These predictions demonstrate the broader usefulness of the adopted approach to systematically predict full photocycle behavior for first-row transition metal photosensitizer-catalyst combinations more broadly.

Structural Control of Highly Efficient Thermally Activated Delayed Fluorescence in Carbene Zinc(II) Dithiolates

Luminescent metal complexes based on earth abundant elements are a valuable target to substitute 4d/5d transition metal complexes as triplet emitters in advanced photonic applications. Whereas CuI complexes have been thoroughly investigated in the last two decades for this purpose, no structure-property-relationships for efficient luminescence involving triplet excited states from ZnII complexes are established. Herein, we report on the design of monomeric carbene zinc(II) dithiolates (CZT) featuring a donor-acceptor-motif that leads to highly efficient thermally activated delayed fluorescence (TADF) with for ZnII compounds unprecedented radiative rate constants kTADF =1.2×106  s-1 at 297 K. Our high-level DFT/MRCI calculations revealed that the relative orientation of the ligands involved in the ligand-to-ligand charge transfer (1/3 LLCT) states is paramount to control the TADF process. Specifically, a dihedral angle of 36-40° leads to very efficient reverse intersystem-crossing (rISC) on the order of 109  s-1 due to spin-orbit coupling (SOC) mediated by the sulfur atoms in combination with a small ΔES1-T1 of ca. 56 meV.

Tailoring the Photophysical Properties of a Homoleptic Iron(II) Tetra N-Heterocyclic Carbene Complex by Attaching an Imidazolium Group to the (C∧N∧C) Pincer Ligand─A Comparative Study

We here report the synthesis of the homoleptic iron(II) N-heterocyclic carbene (NHC) complex [Fe(miHpbmi)2](PF6)4 (miHpbmi = 4-((3-methyl-1H-imidazolium-1-yl)pyridine-2,6-diyl)bis(3-methylimidazol-2-ylidene)) and its electrochemical and photophysical properties. The introduction of the π-electron-withdrawing 3-methyl-1H-imidazol-3-ium-1-yl group into the NHC ligand framework resulted in stabilization of the metal-to-ligand charge transfer (MLCT) state and destabilization of the metal-centered (MC) states. This resulted in an improved excited-state lifetime of 16 ps compared to the 9 ps for the unsubstituted parent compound [Fe(pbmi)2](PF6)2 (pbmi = (pyridine-2,6-diyl)bis(3-methylimidazol-2-ylidene)) as well as a stronger MLCT absorption band extending more toward the red spectral region. However, compared to the carboxylic acid derivative [Fe(cpbmi)2](PF6)2 (cpbmi = 1,1'-(4-carboxypyridine-2,6-diyl)bis(3-methylimidazol-2-ylidene)), the excited-state lifetime of [Fe(miHpbmi)2](PF6)4 is the same, but both the extinction and the red shift are more pronounced for the former. Hence, this makes [Fe(miHpbmi)2](PF6)4 a promising pH-insensitive analogue of [Fe(cpbmi)2](PF6)2. Finally, the excited-state dynamics of the title compound [Fe(miHpbmi)2](PF6)4 was investigated in solvents with different viscosities, however, showing very little dependency of the depopulation of the excited states on the properties of the solvent used.

Robust links in photoactive covalent organic frameworks enable effective photocatalytic reactions under harsh conditions

Developing heterogeneous photocatalysts for the applications in harsh conditions is of high importance but challenging. Herein, by converting the imine linkages into quinoline groups of triphenylamine incorporated covalent organic frameworks (COFs), two photosensitive COFs, namely TFPA-TAPT-COF-Q and TFPA-TPB-COF-Q, are successfully constructed. The obtained quinoline-linked COFs display improved stability and photocatalytic activity, making them suitable photocatalysts for photocatalytic reactions under harsh conditions, as verified by the recyclable photocatalytic reactions of organic acid involving oxidative decarboxylation and organic base involving benzylamine coupling. Under strong oxidative condition, the quinoline-linked COFs show a high efficiency up to 11831.6 μmol·g-1·h-1 and a long-term recyclable usability for photocatalytic production of H2O2, while the pristine imine-linked COFs are less catalytically active and easily decomposed in these harsh conditions. The results demonstrate that enhancing the linkage robustness of photoactive COFs is a promising strategy to construct heterogeneous catalysts for photocatalytic reactions under harsh conditions.

Fusion Position-Dependent Aromatic Transitions of Ligand Backbone Rings for Controlling the Redox Energetics of Photoredox Catalysts

To reveal, quantify, and rationalize the effect of backbone π-extension on ligand redox activity, we studied the ground- and excited-state reduction potentials of eight ruthenium photoredox catalysts with the formula Ru(ppy)2L (L is the redox-active ligand of the bipyridine family) using density functional theory. Our research underlines the profound importance of the fusion position of backbone aromatic C6 rings on the redox activity of ligands in transition metal photoredox catalysts. Namely, certain fusion positions lead to the dearomatization of C6 rings in ligand-centered electron transfer events, resulting in a thermodynamic penalty equivalent to a half-volt negative shift in the reduction potential. Contrarily, the extent of backbone delocalization shows a minimal impact on redox energetics, which can be explained by the charge concentration at the nitrogen contact atoms in ligand-centered reductions. Grounded in Caulton's conceptual framework, we reaffirm the predictive potency of Lewis structures in ligand-centered redox energetics with qualitative and quantitative data. Our hypothesis regarding the effect of backbone ring dearomatization on redox energetics is further corroborated using magnetic and structure-based aromaticity indicators. Highlighting fusion-dependent dearomatization as a determining factor of ligand-centered electron transfer energetics, our findings hold implications for molecular-level design in advanced electroactive materials and catalysts.

Enhanced Visible Light Absorption in Heteroleptic Cuprous Phenanthrolines

This work presents a series of Cu(I) heteroleptic 1,10-phenanthroline chromophores featuring enhanced UVA and visible-light-harvesting properties manifested through vectorial control of the copper-to-phenanthroline charge-transfer transitions. The molecules were prepared using the HETPHEN strategy, wherein a sterically congested 2,9-dimesityl-1,10-phenanthrolne (mesPhen) ligand was paired with a second phenanthroline ligand incorporating extended π-systems in their 4,7-positions. The combination of electrochemistry, static and time-resolved electronic spectroscopy, 77 K photoluminescence spectra, and time-dependent density functional theory calculations corroborated all of the experimental findings. The model chromophore, [Cu(mesPhen)(phen)]+ (1), lacking 4,7-substitutions preferentially reduces the mesPhen ligand in the lowest energy metal-to-ligand charge-transfer (MLCT) excited state. The remaining cuprous phenanthrolines (2-4) preferentially reduce their π-conjugated ligands in the low-lying MLCT excited state. The absorption cross sections of 2-4 were enhanced (εMLCTmax = 7430-9980 M-1 cm-1) and significantly broadened across the UVA and visible regions of the spectrum compared to 1 (εMLCTmax = 6494 M-1 cm-1). The excited-state decay mechanism mirrored those of long-lived homoleptic Cu(I) phenanthrolines, yielding three distinguishable time constants in ultrafast transient absorption experiments. These represent pseudo-Jahn-Teller distortion (τ1), singlet-triplet intersystem crossing (τ2), and the relaxed MLCT excited-state lifetime (τ3). Effective light-harvesting from Cu(I)-based chromophores can now be rationalized within the HETPHEN strategy while achieving directionality in their respective MLCT transitions, valuable for integration into more complex donor-acceptor architectures and longer-lived photosensitizers.

Luminescence and Excited-State Reactivity in a Heteroleptic Tricyanido Fe(III) Complex

Harnessing sunlight via photosensitizing molecules is key for novel optical applications and solar-to-chemical energy conversion. Exploiting abundant metals such as iron is attractive but becomes challenging due to typically fast nonradiative relaxation processes. In this work, we report on the luminescence and excited-state reactivity of the heteroleptic [FeIII(pzTp)(CN)3]- complex (pzTp = tetrakis(pyrazolyl)borate), which incorporates a σ-donating trispyrazolyl chelate ligand and three monodentate σ-donating and π-accepting cyanide ligands. Contrary to the nonemissive [Fe(CN)6]3-, a broad emission band centered at 600 nm at room temperature has been recorded for the heteroleptic analogue attributed to the radiative deactivation from a 2LMCT excited state with a luminescence quantum yield of 0.02% and a lifetime of 80 ps in chloroform at room temperature. Bimolecular reactivity of the 2LMCT excited state was successfully applied to different alcohol photo-oxidation, identifying a cyanide-H bonding as a key reaction intermediate. Finally, this research demonstrated the exciting potential of [Fe(pzTp)(CN)3]- as a photo-oxidant, paving the way for further exploration and development of emissive Fe-based photosensitizers competent for photochemical transformations.

Photoinduced Dynamic Ligation in Metal-Organic Frameworks

Metal organic frameworks (MOFs), a class of porous crystalline materials consisting of metal-based nodes and organic linkers, have emerged as a promising platform for photocatalysis due to their ultrahigh functional surface area, customizable topologies, and tunable energetics. While interesting photochemistry has been reported, the related photoinduced structural dynamics of MOFs remains unclear. The consensus is that the coordination bonds between MOF nodes and linkers are considered static during photoexcitation, while the open-metal sites on the nodes are taken as the key active sites for catalysis. In this work, through a complementary time-resolved visible and infrared (IR) spectroscopic investigation, along with computational studies, we report for the first time light-induced structural bond dissociation (COO-M) and reformation in an iron-oxo framework, MIL-101(Fe). The probed excited state displayed ligand-to-metal charge transfer (LMCT) characteristics and exhibited a ca. 30 μs lifetime. The incredibly long excited-state lifetime led us to probe potential structural rearrangements that facilitated charge separation in MIL-101(Fe). By probing the vibrational fingerprints of the carboxylate linker upon LMCT photoexcitation, we observed the reversible transition of the carboxylate-Fe bond from a bidentate bridging mode to a monodentate mode, indicating the partial dissociation of the carboxylate ligand. Importantly, the bidentate configuration is recovered on the same time scale of the excited state lifetimes as probed via visible transient absorption spectroscopy. The elucidated photoinduced configurational dynamics provides a foundation for an in-depth understanding of MOF-based photocatalytic mechanisms.

Air- and Water-Stable Heteroleptic Copper (I) Complexes Bearing Bis(indazol-1-yl)methane Ligands: Synthesis, Characterisation, and Computational Studies

A series of four novel heteroleptic Cu(I) complexes, bearing bis(1H-indazol-1-yl)methane analogues as N,N ligands and DPEPhos as the P,P ligand, were synthesised in high yields under mild conditions and characterised by spectroscopic and spectrometric techniques. In addition, the position of the carboxymethyl substituent in the complexes and its effect on the electrochemical and photophysical behaviour was evaluated. As expected, the homoleptic copper (I) complexes with the N,N ligands showed air instability. In contrast, the obtained heteroleptic complexes were air- and water-stable in solid and solution. All complexes displayed green-yellow luminescence in CH2Cl2 at room temperature due to ligand-centred (LC) phosphorescence in the case of the Cu(I) complex with an unsubstituted N,N ligand and metal-to-ligand charge transfer (MLCT) phosphorescence for the carboxymethyl-substituted complexes. Interestingly, proper substitution of the bis(1H-indazol-1-yl)methane ligand enabled the achievement of a remarkable luminescent yield (2.5%) in solution, showcasing the great potential of this novel class of copper(I) complexes for potential applications in luminescent devices and/or photocatalysis.

Improved transition metal photosensitizers to drive advances in photocatalysis

To function effectively in a photocatalytic application, a photosensitizer's light absorption, excited-state lifetime, and redox potentials, both in the ground state and excited state, are critically important. The absorption profile is particularly relevant to applications involving solar harvesting, whereas the redox potentials and excited-state lifetimes determine the thermodynamics, kinetics, and quantum yields of photoinduced redox processes. This perspective article focuses on synthetic inorganic and organometallic approaches to optimize these three characteristics of transition-metal based photosensitizers. We include our own work in these areas, which has focused extensively on exceptionally strong cyclometalated iridium photoreductants that enable challenging reductive photoredox transformations on organic substrates, and more recent work which has led to improved solar harvesting in charge-transfer copper(i) chromophores, an emerging class of earth-abundant compounds particularly relevant to solar-energy applications. We also extensively highlight many other complementary strategies for optimizing these parameters and highlight representative examples from the recent literature. It remains a significant challenge to simultaneously optimize all three of these parameters at once, since improvements in one often come at the detriment of the others. These inherent trade-offs and approaches to obviate or circumvent them are discussed throughout.

Multifaceted Deactivation Dynamics of Fe(II) N-Heterocyclic Carbene Photosensitizers

Excited state dynamics of three iron(II) carbene complexes that serve as prototype Earth-abundant photosensitizers were investigated by ultrafast optical spectroscopy. Significant differences in the dynamics between the investigated complexes down to femtosecond time scales are used to characterize fundamental differences in the depopulation of triplet metal-to-ligand charge-transfer (3MLCT) excited states in the presence of energetically accessible triplet metal-centered (3MC) states. Novel insights into the full deactivation cascades of the investigated complexes include evidence of the need to revise the deactivation model for a prominent iron carbene prototype complex, a refined understanding of complex 3MC dynamics, and a quantitative discrimination between activated and barrierless deactivation steps along the 3MLCT → 3MC → 1GS path. Overall, the study provides an improved understanding of photophysical limitations and opportunities for the use of iron(II)-based photosensitizers in photochemical applications.

Polycationic Ru(II) Luminophores: Syntheses, Photophysics, and Application in Electrostatically Driven Sensitization of Lanthanide Luminescence

A series of photoluminescent Ru(II) polypyridine complexes have been synthesized in a manner that varies the extent of the cationic charge. Two ligand systems (L1 and L2), based upon 2,2'-bipyridine (bipy) mono- or difunctionalized at the 5- or 5,5'-positions using N-methylimidazolium groups, were utilized. The resulting Ru(II) species therefore carried +3, +4, +6, and +8 complex moieties based on a [Ru(bipy)3]2+ core. Tetra-cationic [Ru(bipy)2(L2)][PF6]4 was characterized using XRD, revealing H-bonding interactions between two of the counteranions and the cationic unit. The ground-state features of the complexes were found to closely resemble those of the parent unfunctionalized [Ru(bipy)3]2+ complex. In contrast, the excited state properties produce a variation in emission maxima, including a bathochromic 44 nm shift of the 3MLCT band for the tetra-cationic complex; interestingly, further increases in overall charge to +6 and +8 produced a hypsochromic shift in the 3MLCT band. Supporting DFT calculations suggest that the trend in emission behavior may, in part, be due to the precise nature of the LUMO and its localization. The utility of a photoactive polycationic Ru(II) complex was then demonstrated through the sensitization of a polyanionic Yb(III) complex in free solution. The study shows that electrostatically driven ion pairing is sufficient to facilitate energy transfer between the 3MLCT donor state of the Ru(II) complex and the accepting 2F5/2 excited state of Yb(III).

Observation of parallel intersystem crossing and charge transfer-state dynamics in [Fe(bpy)3]2+ from ultrafast 2D electronic spectroscopy

Transition metal-based charge-transfer complexes represent a broad class of inorganic compounds with diverse photochemical applications. Charge-transfer complexes based on earth-abundant elements have been of increasing interest, particularly the canonical [Fe(bpy)3]2+. Photoexcitation into the singlet metal-ligand charge transfer (1MLCT) state is followed by relaxation first to the ligand-field manifold and then to the ground state. While these dynamics have been well-studied, processes within the MLCT manifold that facilitate and/or compete with relaxation have been more elusive. We applied ultrafast two-dimensional electronic spectroscopy (2DES) to disentangle the dynamics immediately following MLCT excitation of this compound. First, dynamics ascribed to relaxation out of the initially formed 1MLCT state was found to correlate with the inertial response time of the solvent. Second, the additional dimension of the 2D spectra revealed a peak consistent with a ∼20 fs 1MLCT → 3MLCT intersystem crossing process. These two observations indicate that the complex simultaneously undergoes intersystem crossing and direct conversion to ligand-field state(s). Resolution of these parallel pathways in this prototypical earth-abundant complex highlights the ability of 2DES to deconvolve the otherwise obscured excited-state dynamics of charge-transfer complexes.

Selectivity control towards CO versus H2 for photo-driven CO2 reduction with a novel Co(II) catalyst

Developing efficient catalysts for reducing carbon dioxide, a highly stable combustion waste product, is a relevant task to lower the atmospheric concentration of this greenhouse gas by upcycling. Selectivity towards CO2-reduction products is highly desirable, although it can be challenging to achieve since the metal-hydrides formation is sometimes favored and leads to H2 evolution. In this work, we designed a cobalt-based catalyst, and we present herein its physicochemical properties. Moreover, we tailored a fully earth-abundant photocatalytic system to achieve specifically CO2 reduction, optimizing efficiency and selectivity. By changing the conditions, we enhanced the turnover number (TON) of CO production from only 0.5 to more than 60 and the selectivity from 6% to 97% after four hours of irradiation at 420 nm. Further efficiency enhancement was achieved by adding 1,1,1,3,3,3-hexafluoropropan-2-ol, producing CO with a TON up to 230, although at the expense of selectivity (54%).

Photo-Catalyzed α-Arylation of Enol Acetate Using Recyclable Silica-Supported Heteroleptic and Homoleptic Copper(I) Photosensitizers

Earth-abundant photosensitizers are highly sought after for light-mediated applications, such as photoredox catalysis, depollution and energy conversion schemes. Homoleptic and heteroleptic copper(I) complexes are promising candidates in this field, as copper is abundant and the corresponding complexes are easily obtained in smooth conditions. However, some heteroleptic copper(I) complexes suffer from low (photo)stability that leads to the gradual formation of the corresponding homoleptic complex. Such degradation pathways are detrimental, especially when recyclability is desired. This study reports a novel approach for the heterogenization of homoleptic and heteroleptic Cu complexes on silica nanoparticles. In both cases, the photophysical properties upon surface immobilization were only slightly affected. Excited-state quenching with aryl diazonium derivatives occurred efficiently (108 -1010  M-1  s-1 ) with heterogeneous and homogeneous photosensitizers. Moderate but almost identical yields were obtained for the α-arylation of enol acetate using the homoleptic complex in homogeneous or heterogeneous conditions. Importantly, the silica-supported photocatalysts were recycled with moderate loss in photoactivity over multiple experiments. Transient absorption spectroscopy confirmed that excited-state electron transfer occurred from the homogeneous and heterogeneous homoleptic copper(I) complexes to aryl diazonium derivatives, generating the corresponding copper(II) center that persisted for several hundreds of microseconds, compatible with photoredox catalysis applications.

Estimation of stability constants of Fe(III) with antibiotics and dissolved organic matter using a novel UV-vis spectroscopy method

Determining conditional stability constant (Kcond) is paramount in assessing complex stability, particularly in Fe(III) complexes that are prevalent in actual surface water and wastewater matrices. In this study, existing methods of Kcond determination were evaluated and a novel UV-Vis spectroscopy method was proposed based on the evaluation of these approaches. Model ligands (ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), and oxalic acid (OA)), as well as common antibiotics (kanamycin (Kana) and tetracycline (TTC)), were employed to determine the Kcond of the Fe(III)-ligand complexes under neutral conditions (pH 6.5). The obtained fitting results revealed that the logKcond were in the order of Fe(III)-EDTA (7.08) > Fe(III)-NTA (4.67) > Fe(III)-OA (4.32) > Fe(III)-TTC (4.28) > Fe(III)-Kana (3.07). In addition to these single ligands, the methodology was extended to the Fe(III) complexation with humic acid (HA), a complex mixture of organic components, where the fitting result indicated a logKcond of 5.02 M-1. The method's application domain was analyzed by numerical analysis and combined with experimental results. The findings demonstrate that the proposed methodology possesses satisfactory measurement capability for Kcond ranging from 103 to 107 M-1, suggesting its broad applicability to the majority of complexes. This method can provide valuable insights into the impact of Fe(III) complexes within the water matrix.

Cubane Dimerization: Cu4 vs Cu8 Copper Iodide Clusters

Copper(I) halides are well-known for their structural diversity and rich photoluminescence properties, showing great potential for the development of solid-state lighting technology. A series of four molecular copper iodide clusters based on the [Cu4I4] cubane geometry is reported. Among them, [Cu8I8] octanuclear clusters of rare geometry resulting from dimerization of the tetranuclear counterparts were also synthesized. Two different phosphine ligands were studied, bearing either a styrene or an ethyl group. Therefore, the effect of the dimerization and of the ligand nature on the photophysical properties of the resulting clusters is investigated. The structural differences were analyzed by single-crystal X-ray diffraction (SCXRD), solid-state nuclear magnetic resonance (NMR), infrared, and Raman analyses. Compared to the ethyl group, the styrene function appears to greatly impact the photophysical properties of the clusters. The luminescence thermochromic properties of the ethyl derivatives and the intriguing photophysical properties of the clusters with styrene function were rationalized by density functional theory (DFT) calculations. Thus, the styrene group significantly lowers in energy the vacant orbitals and consequently affects the global energetic layout of the clusters. From this study, it was found that the nuclearity of copper iodide clusters eventually has less influence on the photophysical properties than the nature of the ligand. The design of proper ligands should therefore be considered when developing materials for specific lighting applications.

Design Strategies for Luminescent Titanocenes: Improving the Photoluminescence and Photostability of Arylethynyltitanocenes

Complexes that undergo ligand-to-metal charge transfer (LMCT) to d0 metals are of interest as possible photocatalysts. Cp2Ti(C2Ph)2 (where C2Ph = phenylethynyl) was reported to be weakly emissive in room-temperature (RT) fluid solution from its phenylethynyl-to-Ti 3LMCT state but readily photodecomposes. Coordination of CuX between the alkyne ligands to give Cp2Ti(C2Ph)2CuX (X = Cl, Br) has been shown to significantly increase the photostability, but such complexes are not emissive in RT solution. Herein, we investigate whether inhibition of alkyne-Ti-alkyne bond compression might be responsible for the increased photostability of the CuX complexes by investigating the decomposition of a structurally constrained analogue, Cp2Ti(OBET) (OBET = o-bis(ethynyl)tolane). To investigate the mechanism of nonradiative decay from the 3LMCT states in Cp2Ti(C2Ph)2CuX, the photophysical properties were investigated both upon deuteration and upon rigidifying in a poly(methyl methacrylate) film. These investigations suggested that inhibition of structural rearrangement may play a dominant role in increasing emission lifetimes and quantum yields. The bulkier Cp*2Ti(C2Ph)2CuBr was prepared and is emissive at 693 nm in RT THF solution with a photoluminescent quantum yield of 1.3 × 10-3 (τ = 0.18 μs). Time-dependent density functional theory (TDDFT) calculations suggest that emission occurs from a 3LMCT state dominated by Cp*-to-Ti charge transfer.

Visible-light induced C(sp3)-H arylation of glycine derivatives by cerium catalysis

A Ce(III)-catalyzed, visible-light induced aerobic oxidative dehydrogenative coupling reaction between glycine derivatives and electron-rich arenes is disclosed. The protocol proceeds efficiently under mild conditions, providing an efficient method for the rapid synthesis of α-arylglycine derivatives without the need for an external photosensitizer and additional oxidant. Moreover, this protocol could be performed on a 5 mmol scale, without obvious reduction of the efficiency.

Nickel(II) Phototheranostics: A Case Study in Photoactivated H2O2-Enhanced Immunotherapy

Phototheranostics have emerged as a promising subset of cancer theranostics owing to their potential to provide precise photoinduced diagnoses and therapeutic outcomes. However, the design of phototheranostics remains challenging due to the nature of tumors and their microenvironment, including limitations to the oxygen supply, high rates of recurrence and metastasis, and the immunosuppressive state of cancer cells. Here we report a dual-functional oxygen-independent phototheranostic agent, Ni-2, rationally designed to provide a near-infrared (NIR) photoactivated thermal- and hydroxyl radical (•OH)-enhanced photoimmunotherapeutic anticancer response. Under 880 nm laser irradiation, Ni-2 exhibited high photostability and excellent photoacoustic and photothermal effects with a photothermal conversion efficacy of 58.0%, as well as novel photoredox features that allowed the catalytic conversion of H2O2 to •OH upon photooxidation of Ni(II) to Ni(III). As a multifunctional photoagent, Ni-2 was found not only to inhibit tumor growth in a CT26 tumor-bearing mouse model but also to activate an immune response via a combination of photothermal- and H2O2-induced effects. When combined with an antiprogrammed death-ligand 1 (aPD-L1), Ni-2 treatment allowed for the suppression of distant tumor growth and cancer metastasis. Collectively, the present results provide support for the proposition that Ni-2 or its analogues could emerge as useful tools for photoimmunotherapy. They also highlight the potential of appropriately designed 3d transition metal complexes as "all- in-one" phototheranostics.