Real-time estimation of bound water concentration during lyophilization with temperature-based state observers

Lyophilization (aka freeze drying) has been shown to provide long-term stability for many crucial biotherapeutics, e.g., mRNA vaccines for COVID-19, allowing for higher storage temperature. The final stage of lyophilization, namely secondary drying, entails bound water removal via desorption, in which accurate prediction of bound water concentration is vital to ensuring the quality of the lyophilized product. This article proposes a novel technique for real-time estimation of the bound water concentration during secondary drying in lyophilization. A state observer is employed, which combines temperature measurement and mechanistic understanding of heat transfer and desorption kinetics, without requiring any online concentration measurement. Results from both simulations and experimental data show that the observer can accurately estimate the concentration of bound water in real time for all possible concentration levels, operating conditions, and measurement noise. This framework can also be applied for monitoring and control of the residual moisture in other desorption-related processes.

Cooperative lattice theory for CO2 adsorption in diamine-appended metal-organic framework at humid direct air capture conditions

The effect of humidity on the cooperative adsorption of CO2 from the air on amine-appended metal-organic frameworks is studied both experimentally and theoretically. Breakthrough experiments show that, at low relative humidities, there is an anomalous induction effect, where the kinetics at short times are slower than kinetics at long times. The induction effect gradually vanishes as relative humidity is increased, corresponding to an increase in CO2 adsorption rate. A new theory is proposed based on the lattice kinetic theory (LKT), which explains these experimental results. LKT can accurately represent the measured data over the full range of humidities by postulating that the presence of adsorbed water shifts the equilibrium clusters from cooperatively bound chains to non-cooperatively bound CO2. A consequence of this transition is that CO2 exhibits step adsorption isotherm in dry air and a standard Langmuir adsorption isotherm in high humidity air.

Synthesis of Porous Red Mud/Slag-Based Spherical Geopolymers for Efficient Methylene Blue and Ni2+ Removal from Water

To reuse red mud and slag wastes as raw materials, a green type of porous spherical red mud/slag-based geopolymer (RSG) was synthesized by utilizing suspension curing and foaming techniques. Because methylene blue (MB) and nickel ion (Ni2+) were common and difficult to treat in wastewater, the adsorption characteristics of MB and Ni2+, as well as the phase and microstructure of the porous RSG spheres prior to and after adsorption, were thoroughly investigated. The porous RSG spheres showed a stable and mesoporous structure with a BET surface area of 31.36 m2/g. The spheres achieved the maximum removal efficiencies of 99.81% (MB) and 99.01% (Ni2+) at dosages of 16 and 10 g/L, respectively. The pseudo-second-order kinetic model and the Langmuir model could match the adsorption data of these spheres, with predicted maximum adsorption capacity (Qmax) values of 19.88 mg/g for MB and 12.39 mg/g for Ni2+, respectively. After three adsorption-desorption cycles, porous RSG spheres demonstrated good recycling capability with removal efficiencies of 98.10% (MB) and 54.60% (Ni2+). The spheres were also effective in adsorbing additional dyes (methyl orange (MO), crystal violet (CV), and malachite green (MG)) and heavy metal ions (Cd2+, Pb2+, Zn2+, and Cu2+). The spheres have potential use in water treatment.

Kinetics of Adsorption-Induced Deformation of Microporous Carbons

Equilibrium and kinetic behavior of adsorption-induced deformation have attracted a lot of attention in the last few decades. The theoretical and experimental works cover activated carbons, coals, zeolites, glasses, etc. However, most of the theoretical works describe only the equilibrium part of the deformation process or focus on the time evolution of the adsorption process. The present paper aims to cover the existing gap using the thermodynamic framework combined with the diffusion-based description of adsorbate time evolution inside an adsorbent. We obtained self-consistent equations describing equilibrium and out-of-equilibrium adsorption, as well as deformation processes. Further, the obtained equations were verified on the experimental data of carbon dioxide and methane on activated carbons. The model is capable of describing both equilibrium and kinetic adsorption and adsorption-induced deformation data. Additionally, we studied the possible influence of slow relaxation processes in the adsorbent on the adsorption process. The current work helps to interpret experimental data for time-dependent adsorption-induced deformation.

Physics-based prediction of moisture-capture properties of hydrogels

Moisture-capturing materials can enable potentially game-changing energy-water technologies such as atmospheric water production, heat storage, and passive cooling. Hydrogel composites recently emerged as outstanding moisture-capturing materials due to their low cost, high affinity for humidity, and design versatility. Despite extensive efforts to experimentally explore the large design space of hydrogels for high-performance moisture capture, there is a critical knowledge gap on our understanding behind the moisture-capture properties of these materials. This missing understanding hinders the fast development of novel hydrogels, material performance enhancements, and device-level optimization. In this work, we combine synthesis and characterization of hydrogel-salt composites to develop and validate a theoretical description that bridges this knowledge gap. Starting from a thermodynamic description of hydrogel-salt composites, we develop models that accurately capture experimentally measured moisture uptakes and sorption enthalpies. We also develop mass transport models that precisely reproduce the dynamic absorption and desorption of moisture into hydrogel-salt composites. Altogether, these results demonstrate the main variables that dominate moisture-capturing properties, showing a negligible role of the polymer in the material performance under all considered cases. Our insights guide the synthesis of next-generation humidity-capturing hydrogels and enable their system-level optimization in ways previously unattainable for critical water-energy applications.

Modeling Mass Transport Dynamics in Deformable Hydrogels during Evaporation

Hydrogels possess exceptional mechanical properties and biocompatibility, making them widely used in contemporary bioengineering. Specifically, in the development of wearable and implantable health monitoring devices as well as drug delivery systems, hydrogels are utilized to enable precise control over the transport of solutes. Nonetheless, predicting the distribution of substances within hydrogels still poses a significant challenge due to the complex interplay between the movement of water content, migration of solutes, and deformability of the hydrogel polymer network, which presents challenges to theoretical modeling. Our work introduces a numerical model that addresses the movement of water and solute within a flexible hydrogel, accounting for evaporation and/or moisture absorption at the boundary. The model solves for water saturation, solute concentration, and hydrogel deformation iteratively at each time step while computing the boundary movement velocity based on the transport process. By comparing the modeled results of geometry deformation and water and solute distributions during evaporation with our experiments, we demonstrate the accuracy and applicability of our proposed model. This capability to precisely analyze water and solute concentrations in deformable and nonuniform hydrogel environments paves the way for advancements in biosensing and drug delivery methods that rely on elastic porous materials.

Mind the Gap: The Role of Mass Transfer in Shaped Nanoporous Adsorbents for Carbon Dioxide Capture

Adsorptive separations by nanoporous materials are major industrial processes. The industrial importance of solid adsorbents is only expected to grow due to the increased focus on carbon dioxide capture technology and energy-efficient separations. To evaluate the performance of an adsorbent and design a separation process, the adsorption thermodynamics and kinetics must be known. However, although diffusion kinetics determine the maximum production rate in any adsorption-based separation, this aspect has received less attention due to the challenges associated with conducting diffusion measurements. These challenges are exacerbated in the study of shaped adsorbents due to the presence of porosity at different length scales. As a result, adsorbent selection typically relies mainly on adsorption properties at equilibrium, i.e., uptake capacity, selectivity and adsorption enthalpy. In this Perspective, based on an extensive literature review on mass transfer of CO2 in nanoporous adsorbents, we discuss the importance and limitations of measuring diffusion in nanoporous materials, from the powder form to the adsorption bed, considering the nature of the process, i.e., equilibrium-based or kinetic-based separations. By highlighting the lack of and discrepancies between published diffusivity data in the context of CO2 capture, we discuss future challenges and opportunities in studying mass transfer across scales in adsorption-based separations.

Stability of Iodine Species Trapped in Titanium-Based MOFs: MIL-125 and MIL-125_NH2

Two titanium-based MOFs MIL-125 and MIL-125_NH2 are synthesized and characterized using high-temperature powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N2 sorption, Fourier transformed infrared spectroscopy (FTIR), Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), and electron paramagnetic resonance (EPR). Stable up to 300 °C, both compounds exhibited similar specific surface areas (SSA) values (1207 and 1099 m2 g-1 for MIL-125 and MIL-125_NH2, respectively). EPR signals of Ti3+ are observed in both, whith MIL-125_NH2 also showing ─NH2 ●+ signatures. Both MOFs efficiently adsorbed iodine in continuous gas flow over five days, with MIL-125 trapping 1.9 g.g-1 and MIL-125_NH2 trapping 1.6 g.g-1. MIL-125_NH2 exhibited faster adsorption kinetics due to its smaller band gap (2.5 against 3.6 eV). In situ Raman spectroscopy conducted during iodine adsorption revealed signal evolution from "free" I2 to "perturbed" I2, and I3 -. TGA and in situ Raman desorption experiments showed that ─NH2 groups improved the stabilization of I3 - due to an electrostatic interaction with NH2 ●+BDC radicals. The Albery model indicated longer lifetimes for iodine desorption in I2@MIL-125_NH2, attributed to a rate-limiting step due to stronger interaction between the anionic iodine species and the ─NH2 ●+ radicals. This study underscores how MOFs with efficient charge separation and hole-stabilizer functional groups enhance iodine stability at higher temperatures.

Activated carbons-preparation, characterization and their application in CO2 capture: A review

In this paper, we provide a comprehensive review of the latest research trends in terms of the preparation, and characteristics of activated carbons regarding CO2 adsorption applications, with a special focus on future investigation paths. The reported current research trends are primarily closely related to the synthesis conditions (carbonization and physical or chemical activation process), to develop the microporosity and surface area, which are the most important factors affecting the effectiveness of adsorption. Furthermore, we emphasized the importance of regeneration techniques as a factor determining the actual technological and economic suitability of a given material for CO2 capture application. Consequently, this work provides a summary and potential directions for the development of activated carbons (AC). We attempt to create a thorough theoretical foundation for activated carbons while also focusing on identifying and specific statements of the most relevant ongoing research scope that might be advantageous to progress and pursue in the coming years.

Dynamic Model Validation and Simulation of Acetone-Toluene and Benzene-Toluene Systems for Industrial Volatile Organic Compound (VOC) Abatement

Environmental impact mitigation is one of the grand challenges for industries globally. Volatile organic compounds (VOCs) are solvents whose emissions are potentially toxic to human health and ecosystems yet indispensable for the manufacturing of life-saving medicine. Adsorption with activated carbon columns is an established countermeasure for end-of-pipe emission control, whose efficiency, however, is impeded by irregular bed saturation due to the complex nature of its inputs. This work presents the application of a validated nonisothermal adsorption model to examine multicomponent trace mixtures of acetone-toluene and benzene-toluene on activated carbon. Our results indicate preferential adsorption of toluene over both acetone and benzene for all concentrations examined, which is in agreement with experimental data. Moreover, moderate temperature variations and pressure drops are revealed. Finally, Glueckauf's hodograph theory is employed for maximum outlet concentration prediction and compared with simulation results and experimental data, thus providing valuable insights into nonisothermal VOC abatement, which paves the way for industrial operation optimization.

Minimal Kinetic Model of Direct Air Capture of CO2 by Supported Amine Sorbents in Dry and Humid Conditions

Dilute concentration (∼400 ppm) and humidity are two important factors in the direct air capture (DAC) of CO2 by supported sorbents. In this work, a minimal DAC CO2 adsorption-kinetics model was formulated for supported amine sorbents under dry and humid conditions. Our model fits well with a recent DAC experiment with supported amine sorbent in both dry and humid conditions. Temperature and flow rate effects on breakthrough curves were quantitatively captured, and increasing temperature led to faster CO2 adsorption kinetics. Moisture was shown to broaden the breakthrough curve with slower CO2 adsorption kinetics but significantly improve the uptake capacity. The present minimal model provides a versatile platform for kinetic modeling of the DAC of CO2 on supported amine and other chemisorption systems.

Investigation of the Dynamic Behaviour of H2 and D2 in a Kinetic Quantum Sieving System

Porous organic cages (POCs) are nanoporous materials composed of discrete molecular units that have uniformly distributed functional pores. The intrinsic porosity of these structures can be tuned accurately at the nanoscale by altering the size of the porous molecules, particularly to an optimal size of 3.6 Å, to harness the kinetic quantum sieving effect. Previous research on POCs for isotope separation has predominantly centered on differences in the quantities of adsorbed isotopes. However, nuclear quantum effects also contribute significantly to the dynamics of the sorption process, offering additional opportunities for separating H2 and D2 at practical operational temperatures. In this study, our investigations into H2 and D2 sorption on POC samples revealed a higher uptake of D2 compared to that of H2 under identical conditions. We employed quasi-elastic neutron scattering to study the diffusion processes of D2 and H2 in the POCs across various temperature and pressure ranges. Additionally, neutron Compton scattering was utilized to measure the values of the nuclear zero-point energy of individual isotopic species in D2 and H2. The results indicate that the diffusion coefficient of D2 is approximately one-sixth that of H2 in the POC due to the nuclear quantum effect. Furthermore, the results reveal that at 77 K, D2 has longer residence times compared to H2 when moving from pore to pore. Consequently, using the kinetic difference of H2 and D2 in a porous POC system enables hydrogen isotope separation using a temperature or pressure swing system at around liquid nitrogen temperatures.

Adsorption process modeling to reduce COD by activated carbon for wastewater treatment

Investigations have been carried out on the utilization of Activated Carbon (AC) in adsorption processes for the wastewater treatment of industry and municipal. Sulfides materials, phenols and furfural is a toxic compounds in wastewater from refineries can adversely affect the performance of biological aeration basins in reducing COD levels. This work aims to provide the effectiveness of AC in reducing the COD level of the effluent from the Dissolved Air Flotation (DAF) unit to meet standards of environments protecting and pass the design of wastewater treatment plants. A dynamic adsorption model was developed based on the dispersion of axial in the AC packed bed, assuming that the LDF (linear driving force) model in to the adsorbents is agreed to mass transfer. The model's predictions of chemical oxygen demand breakthrough curve concentrations showed excellent agreement with experimental data. The sensitivity analysis of operational conditions such as flow rate, inlet concentration of COD and bed length was used to gain a better understanding of the optimal design of an AC fixed bed. The results suggest that an AC fixed bed can complement biological treatment of wastewater and address the challenges faced by biological basins in oil refineries.

Treatment of textile wastewater using carbon-based nanomaterials as adsorbents: a review

Waste derived from the textile industry can contain a wide variety of pollutants of organic and inorganic natures, such as dyes (e.g., acid, basic, reactive, mordant dyes) and toxic metals (e.g., lead, chromium, cadmium). The presence of pollutants at high concentrations in textile waste makes them relevant sources of pollution in the environment. To solve this problem, various technologies have been developed for the removal of pollutants from these matrices. Thus, adsorption emerges as an efficient alternative for textile waste remediation, providing advantages as simplicity of operation, economy, possibility of using different adsorbent materials, and developing on-line systems that allow the reuse of the adsorbent during several adsorption/desorption cycles. This review will initially propose an introduction to the adsorption world, its fundamentals, and aspects related to kinetics, equilibrium, and thermodynamics. The possible mechanisms through which a pollutant can be retained on an adsorbent will be explained. The analytical techniques that offer valuable information to characterize the solid phases as well as each adsorbate/adsorbent system will be also commented. The most common synthesis techniques to obtain carbon nano-adsorbents have been also presented. In addition, the latest advances about the use of these adsorbents for the removal of pollutants from textile waste will be presented and discussed. The contributions reported in this manuscript demonstrated the use of highly efficient carbon-based nano-adsorbents for the removal of both organic and inorganic pollutants, reaching removal percentages from 65 to 100%.

Red Mud-Amended Soil as Highly Adsorptive Hybrid-Fill Materials for Controlling Heavy Metal Sewage Seepage in Industrial Zone

With the rapid development of urbanization, the problem of environmental pollution is becoming more and more serious. As a major pollutant, heavy metals have caused serious contamination in soil and groundwater. In order to prevent the diffusion of heavy metals in the soil from industrial sewage, the concept of hybrid-fill layer construction improved by red mud was proposed in this study. This study examines the adsorption capacities of lead and zinc ions and engineering characteristics on red mud-amended soils by direct shear, permeability, adsorption, desorption batch and column tests. Two mixing methods, full particle size displacement mixing and partial particle size displacement mixing, were adopted. The results showed that red mud effectively increased the adsorption capacity of soil to heavy metal ions, and the desorption rate of ions after adsorption was less than 3%, which had good anti-desorption ability. The optimum content of red mud in hybrid-fill material can be determined as 20%. The direct shear test showed that the internal friction angle of hybrid-fill material was 38.9°, and the cohesive force was 30.3 kPa, which met the engineering strength requirements of foundation materials. Based on the test results, red mud can be used as a barrier material to prevent heavy metal contamination in industrial sewage from diffusion, which controls not only heavy metal contamination but also consumes industrial by-products.

Analysis of commonly used batch adsorption kinetic models derived from mass transfer-based modelling

Modelling of liquid-solid batch adsorption based on mass transfer and conservation equations results in differential equations that may have or not an analytical solution. Even when analytical solutions are available, several simplified models can be considered for evaluating kinetic data of batch adsorption experiments. However, these simplified models are commonly used regardless of the premises considered in its development, and the analysis of the kinetic experiments based on these simplified models may be severely compromised. For this reason, this work presents a detailed development of the phenomenological models, and the hypotheses considered in its development are clearly stated. Typical simplified models derived from the phenomenological ones are obtained, and the conditions considered in the simplification are critically assessed. It was observed that the simplified models fail mainly for considering the concentration of the bulk phase constant over time or considering a linear adsorption isotherm. It must be emphasised that even when phenomenological models must be solved through numerical procedures, its use must be preferred, since the agreement with model premises and experimental conditions are closer, ensuring the quality of the kinetic data analysis.

Exceptional water production yield enabled by batch-processed portable water harvester in semi-arid climate

Sorption-based atmospheric water harvesting has the potential to realize water production anytime, anywhere, but reaching a hundred-gram high water yield in semi-arid climates is still challenging, although state-of-the-art sorbents have been used. Here, we report a portable and modularized water harvester with scalable, low-cost, and lightweight LiCl-based hygroscopic composite (Li-SHC) sorbents. Li-SHC achieves water uptake capacity of 1.18, 1.79, and 2.93 g g−1 at 15%, 30%, and 60% RH, respectively. Importantly, considering the large mismatch between water capture and release rates, a rationally designed batch processing mode is proposed to pursue maximum water yield in a single diurnal cycle. Together with the advanced thermal design, the water harvester shows an exceptional water yield of 311.69 g day−1 and 1.09 g gsorbent−1 day−1 in the semi-arid climate with the extremely low RH of ~15%, demonstrating the adaptability and possibility of achieving large-scale and reliable water production in real scenarios.

Finite Element Modeling of Atmospheric Water Extraction by Way of Highly Porous Adsorbents: A Roadmap for Solver Construction with Model Factor Sensitivity Screening

A finite element model (FEM) is developed for use in determining adsorption system performance. The model is intended to guide novel adsorbent structure fabrication and atmospheric water harvesting device design. We survey a variety of governing equation factor inputs and relationships which describe the interaction between zeolite 13X and water vapor. Mitigation strategies are discussed for detecting the breakdown of continuum modeling at the microscale wherein Knudsen effects and other anomalous behaviors emerge. Characterization of model factor inputs and the techniques for their sourcing is described with consideration to the construction of a high throughput multiscale shape optimized computational schema. Four objectives guided the development of this model. Our first objective was to understand the implementation of adsorption system equations and the assumptions that could prevent reliable predictability. The second objective was to assemble, reduce, and analyze model constants and approximations that express FEM coefficient calculations as physical forces and thermodynamic properties which could be derived from other computational methods. Third, we analyzed factor sensitivity of model inputs by way of a 2^k factorial screening to determine which inputs are driving the physics of water harvesting adsorption systems. The fourth objective was to design the FEM solver for integration into a multiscale high throughput topologically optimized schema. The main finding of the solver factor screening indicates that total micropore volume has the highest value characteristics in relation to water uptake.

Iodine Uptake by Zr-/Hf-Based UiO-66 Materials: The Influence of Metal Substitution on Iodine Evolution

Many works reported the encapsulation of iodine in metal-organic frameworks as well as the I₂ → I₃^- chemical conversion. This transformation has been examined by adsorbing gaseous iodine on a series of UiO-66 materials and the different Hf/Zr metal ratios (0-100% Hf) were evaluated during the evolution of I₂ into I₃^-. The influence of the hafnium content on the UiO-66 structure was highlighted by PXRD, SEM images, and gas sorption tests. The UiO-66(Hf) presented smaller lattice parameter (a = 20.7232 Å), higher crystallite size (0.18 ≤ Φ ≤ 3.33 μm), and smaller SSA_BET (818 m²·g^-1) when compared to its parent UiO-66(Zr) ─ a = 20.7696 Å, 100 ≤ Φ ≤ 250 nm, and SSA_BET = 1262 m²·g^-1. The effect of replacing Zr atoms by Hf in the physical properties of the UiO-66 was deeply evaluated by a spectroscopic study using UV-vis, FTIR, and Raman characterizations. In this case, the Hf presence reduced the band gap of the UiO-66, from 4.07 eV in UiO-66(Zr) to 3.98 eV in UiO-66(Hf). Furthermore, the UiO-66(Hf) showed a blue shift for several FTIR and Raman bands, indicating a stiffening on the implied interatomic bonds when comparing to UiO-66(Zr) spectra. Hafnium was found to clearly favor the capture of iodine [285 g·mol^-1, against 230 g·mol^-1 for UiO-66(Zr)] and the kinetic evolution of I₂ into I₃^- after 16 h of I₂ filtration. Three iodine species were typically identified by Raman spectroscopy and chemometric analysis. These species are as follows: "free" I₂ (206 cm^-1), "perturbed" I₂ (173 cm^-1), and I₃^- (115 and 141 cm^-1). It was also verified, by FTIR spectroscopy, that the oxo and hydroxyl groups of the inorganic [M₆O₄(OH)₄] (M = Zr, Hf) cluster were perturbed after the adsorption of I₂ into UiO-66(Hf), which was ascribed to the higher acid character of Hf. Finally, with that in mind and considering that the EPR results discard the possibility of a redox phenomenon involving the tetravalent cations (Hf⁴⁺ or Zr⁴⁺), a mechanism was proposed for the conversion of I₂ into I₃^- in UiO-66─based on an electron donor-acceptor complex between the aromatic ring of the BDC linker and the I₂ molecule.

Optimization and Recovery of a Pressure Swing Adsorption Process for the Purification and Production of Bioethanol

Today, there are new technologies to produce bioethanol: one of them is the Pressure Swing Adsorption (PSA) process. This process has displaced other separation technologies due to the use of natural adsorbents and its methodology to obtain high purities with a lower energy cost. The aim of this work focuses on the optimization of the PSA process (experimental case) to obtain a higher recovery and production of bioethanol using lower energy consumption. The results are favorable since the energy cost is reduced to a range of 60% and 62%, obtaining purities above 99% wt of ethanol and recovery between 75% and 77.41%. The bioethanol produced and purified in the different scenarios meets international standards to be used as a fuel or oxygenating additive.

High-Performance Carbon Molecular Sieves for the Separation of Propylene and Propane

High-performance carbon molecular sieves (CMSs) for the separation of propylene (C₃H₆) and propane (C₃H₈) were synthesized in this study by chemical vapor deposition (CVD) of benzene on the pore entrances of activated carbon. The C₃H₆ and C₃H₈ separation characteristics of the CMSs were controlled by altering the amount of carbon deposited during CVD, and the resulting characteristic curve featuring the kinetic selectivity of C₃H₆ over C₃H₈ as a function of the adsorption rate constant of C₃H₆ is considered to be the upper bound of the C₃H₆-C₃H₈ separation factor for current CMSs because of the presence of previously reported CMS data under this curve. Additionally, CMS models were constructed using grand canonical molecular dynamics (GCMD) simulations mimicking the process of CVD, which revealed that the kinetic selectivity of C₃H₆ over C₃H₈ strongly depended on the size of the pore entrances at the level of 0.01 nm, and that strict control of the pore-entrance size was crucial for obtaining high-performance CMSs for C₃H₆-C₃H₈ separation. This was essentially achieved by controlling the duration of CVD, which led to the experimental realization of CMSs with a C₃H₆ selectivity over C₃H₈ of >2000 and a high uptake rate of C₃H₆. A design guideline for the development of high-performance CMSs for C₃H₆-C₃H₈ separation was proposed based on theoretical calculations performed using idealized carbon structures, which extracted the characteristics of the CMS models obtained from the GCMD simulations.

Porous Coatings to Control Release Rates of Essential Oils to Generate an Atmosphere with Botanical Actives

Essential oils have been used in diverse areas such as packaging, agriculture and cosmetics, for their antimicrobial and pesticide activity. The organic volatile compounds of the essential oils are involved in its activity. Controlling their release helps to prolong their functionality. In this study, a functionalized calcium carbonate porous coating was employed to control the release of thyme and rosemary oil in a confined space. The release rate was evaluated at 7 °C and 23 °C, gravimetrically. It was shown that the capillary effect of the porous coating slowed down the release of the volatiles into the headspace compared to the bulk essential oil. A linear drive force model was used to fit the obtained data from both essential oils. The model showed that rosemary reached the asymptotic mass loss equilibrium faster than thyme. This result can be explained by the diverse composition and concentration of monoterpenoids between the two essential oils. Temperature and degree of loading also played important roles in the desorption of the essential oils. It was observed that at high degrees of loading and temperatures the desorption of essential oils was higher. The above-described technology could be used for applications related to food preservation, pest control among others.

Capture of Gaseous Iodine in Isoreticular Zirconium-Based UiO-n Metal-Organic Frameworks: Influence of Amino Functionalization, DFT Calculations, Raman and EPR Spectroscopic Investigation

A series of Zr-based UiO-n MOF materials (n=66, 67, 68) have been studied for iodine capture. Gaseous iodine adsorption was collected kinetically from a home-made set-up allowing the continuous measurement of iodine content trapped within UiO-n compounds, with organic functionalities (-H, -CH₃ , -Cl, -Br, -(OH)₂ , -NO₂ , -NH₂ , (-NH₂ )₂ , -CH₂ NH₂ ) by in-situ UV-Vis spectroscopy. This study emphasizes the role of the amino groups attached to the aromatic rings of the ligands connecting the {Zr₆ O₄ (OH)₄ } brick. In particular, the preferential interaction of iodine with lone-pair groups, such as amino functions, has been experimentally observed and is also based on DFT calculations. Indeed, higher iodine contents were systematically measured for amino-functionalized UiO-66 or UiO-67, compared to the pristine material (up to 1211 mg/g for UiO-67-(NH₂ )₂ ). However, DFT calculations revealed the highest computed interaction energies for alkylamine groups (-CH₂ NH₂ ) in UiO-67 (-128.5 kJ/mol for the octahedral cavity), and pointed out the influence of this specific functionality compared with that of an aromatic amine. The encapsulation of iodine within the pore system of UiO-n materials and their amino-derivatives has been analyzed by UV-Vis and Raman spectroscopy. We showed that a systematic conversion of molecular iodine (I₂ ) species into anionic I^- ones, stabilized as I^- ⋅⋅⋅I₂ or I₃ ^- complexes within the MOF cavities, occurs when I₂ @UiO-n samples are left in ambient light.

Extrusion-Spheronization of UiO-66 and UiO-66_NH2 into Robust-Shaped Solids and Their Use for Gaseous Molecular Iodine, Xenon, and Krypton Adsorption

The use of an extrusion-spheronization process was investigated to prepare robust and highly porous extrudates and granules starting from UiO-66 and UiO-66_NH₂ metal-organic framework powders. As-produced materials were applied to the capture of gaseous iodine and the adsorption of xenon and krypton. In this study, biosourced chitosan and hydroxyethyl cellulose (HEC) are used as binders, added in low amounts (less than 5 wt % of the dried solids), as well as a colloidal silica as a co-binder when required. Characterizations of the final shaped materials reveal that most physicochemical properties are retained, except the textural properties, which are impacted by the process and the proportion of binders (BET surface area reduction from 5 to 33%). On the other hand, the mechanical resistance of the shaped materials toward compression is greatly improved by the presence of binders and their respective contents, from 0.5 N for binderless UiO-66 granules to 17 N for UiO-66@HEC granules. UiO-66_NH₂-based granules demonstrated consequent iodine capture after 48 h, up to 527 mg/g, in line with the pristine UiO-66_NH₂ powder (565 mg/g) and proportionally to the retaining BET surface area (-5% after shaping). Analogously, the shaped materials presented xenon and krypton sorption isotherms correlated to their BET surface area and high predicted xenon/krypton selectivity, from 7.1 to 9.0. Therefore, binder-aided extrusion-spheronization is an adapted method to produce shaped solids with adequate mechanical resistance and retained functional properties.

Experimental and Theoretical Assessment of Water Sorbent Kinetics

The kinetics of water adsorption in powder sorbent layers are important to design a scaled-up atmospheric water capture device. Herein, the adsorption kinetics of three sorbents, a chromium (Cr)-based metal-organic framework (Cr-MIL-101), a carbon-based material (nanoporous sponges/NPS), and silica gel, have been tested experimentally, using powder layers ranging from ∼0 to 7.5 mm in thickness, in a custom-made calibrated environmental chamber cycling from 5 to 95% RH at 30 °C. A mass and energy transfer model was applied onto the experimental curves to better understand the contribution of key parameters (maximum water uptake, kinetics of single particles, layer open porosity, and particle size distribution). Open porosity (i.e., the void-to-particle ratio in the sorbent layer) shows the highest influence to improve the kinetics. Converting the sorbent kinetics data into a daily yield of captured water demonstrated (i) the existence of an optimal open porosity for each sorbent, (ii) that thinner layers with moderate open porosity performed respectively better than thicker layers with high open porosity, and (iii) that high maximum water uptake and fast single-particle kinetics are not necessarily predictive of high daily water yield.

Kinetics of Sorption in Hygroscopic Hydrogels

Hygroscopic hydrogels hold significant promise for high-performance atmospheric water harvesting, passive cooling, and thermal management. However, a mechanistic understanding of the sorption kinetics of hygroscopic hydrogels remains elusive, impeding an optimized design and broad adoption. Here, we develop a generalized two-concentration model (TCM) to describe the sorption kinetics of hygroscopic hydrogels, where vapor transport in hydrogel micropores and liquid transport in polymer nanopores are coupled through the sorption at the interface. We show that the liquid transport due to the chemical potential gradient in the hydrogel plays an important role in the fast kinetics. The high water uptake is attributed to the expansion of hydrogel during liquid transport. Moreover, we identify key design parameters governing the kinetics, including the initial porosity, hydrogel thickness, and shear modulus. This work provides a generic framework of sorption kinetics, which bridges the knowledge gap between the fundamental transport and practical design of hygroscopic hydrogels.

Effect of radial distribution of injected flow on simulated moving bed performance

In the modeling of a simulated moving bed, several assumptions are considered, the key assumption is there are no radial concentration gradients based on perfect mixing. However, it is difficult to achieve perfect mixing because the injected flowrate of the bed is periodically changed in the process. In this study, the performance of the simulated moving bed process was analyzed when the injected flow such as the feed or desorbent stream was unevenly distributed. To this end, the distribution function of the injected flow was calculated and applied to the model. Two types of distribution functions were obtained using the experimental results of a previous study, and the simulation results were compared with classical modeling assuming perfect mixing. In the base case simulation, the purity was similar in all cases, the productivity was higher more than 5% in the even distribution case compared to the most uneven distribution case. The effect of distribution was analyzed through sensitivity analysis by changing the overall flow rate, switching time, bed length, and flow rate of sections 2 and 3. As a result, regardless of the distribution applied, the trends of the performance parameters were the same. However, the more uneven the distribution, the greater the difference in productivity, recovery, and desorbent consumption compared to the even distribution case. It was confirmed that the design that distributes the injected flow more evenly has a better performance.

Adsorption kinetics and equilibria of two methanol samples with different water content on activated carbon

To investigate the influence of fluid purity on the adsorption properties, adsorption kinetics and adsorption equilibria of two methanol samples with different water content on an activated carbon were studied. The purity of the methanol samples was 98.5% and 99.9%. Measurements were conducted at 298 K and 318 K using a magnetic suspension balance and cover a wide p/p0 range. To determine effective diffusion time constants and mass transfer coefficients, adsorption kinetics were evaluated using an isothermal and a nonisothermal Fickian diffusion model, and the linear driving force model. The pressure dependence of the kinetic parameters was studied and discussed. A small influence of sample purity on the adsorption equilibria was observed, as the purer methanol sample showed slightly higher equilibrium loadings than the less pure sample. However, significantly faster adsorption kinetics were observed for the purer sample at all temperature and pressure conditions. Compared to the less pure sample, the determined effective diffusion time constants and the mass transfer coefficients were up to 98% and 35% higher, respectively.

A critical overview of adsorption kinetics for cooling and refrigeration systems

The dynamic uptake of adsorbate onto the porous adsorbent plays a crucial role in determining the performance of the adsorption-based cooling system. Therefore, it is imperative to know the kinetics parameters of an adsorbate - adsorbent pair to design a system to be operated at variable working conditions. The kinetics models of adsorption, used to simulate the adsorption rate of different pairs, are derived and presented in this paper. Besides, the limitations and advantages of the models are also mentioned. Moreover, the dynamic performance of different adsorption pairs is analyzed, and the values of kinetics parameters, determined through experimental procedures and fitting of kinetics models, are also summarized. It is opined that during the initial unsaturated condition of adsorption, the semi-infinite model can be preferred to determine the diffusion time constant. The modification of different models, e.g., Langmuir and linear driving force models, can significantly overcome the drawbacks of the models, as shown by several researchers. However, research may be carried out to investigate different models' fitting errors from a statistical perspective. Furthermore, to evaluate the dynamic performance of different adsorbates, a lot of research needs to be done, specifically, on the adsorption of the newly developed environment-friendly refrigerants, onto the promising composite adsorbents possessing high thermal conductivity and significantly improved adsorption uptakes.

Dynamic simulation of high-purity twin-bed N2-PSA plants

At present, nitrogen production from air by pressure swing adsorption (PSA) is simulated almost exclusively at low product purity levels (< 99% N2). However, with increasing global demand for highly purified gases provided by energy-efficient separation processes the requirement for either extensive experimental research in the high-purity range or predictive computer simulations arises. This paper presents a mathematical model of a twin-bed PSA plant equipped with a carbon molecular sieve (Shirasagi MSC CT-350) for the generation of high-purity nitrogen (99.9–99.999% N2). The model is implemented in the process simulator Aspen Adsorption™. The influence of operating conditions as well as the cycle organisation on the process performance is validated, especially the influence of pressure, temperature, half-cycle time, purge flow rate, and cutting time. The precision of the performance prediction by numerical simulations is critically discussed. Based on the new insights efficiency improvement strategies with a focus on reduced energy consumption are introduced and discussed by means of radar charts.

A Roadmap to Sorption-Based Atmospheric Water Harvesting: From Molecular Sorption Mechanism to Sorbent Design and System Optimization

Sorption-based atmospheric water harvesting (SAWH), which uses sorbents to capture water vapor from the air and low-grade energy to produce fresh liquid water, has been recognized as a promising strategy for decentralized water supply in arid areas. This review aims to summarize the latest progress in this field and provide perspectives for the further development of SAWH, focusing on the design of sorbent materials and the optimization of the entire system. We first introduce the water sorption mechanisms on different sorbent materials. Next, we discuss the properties and performances of various sorbents developed for SAWH by categorizing them into specific groups: nanoporous solids, hygroscopic polymers, salt-based composites, and liquid sorbents; for each type of sorbent materials, we have analyzed its advantages and limitations, as well as design strategies. In addition, we discuss the influences of the mass and heat transport of the SAWH system on its overall performance in actual operations, and introduce different types of water harvesters developed for SAWH. In the last section, we outline the challenges in this field from fundamental research and practical application aspects, and describe roadmaps for the future development of this technology.

Detoxification of sisal bagasse hydrolysate using activated carbon produced from the gasification of açaí waste

Due to its recalcitrance and difficult disruption, biomass requires severe treatment conditions to produce bioproducts. These processes also generate substances that inhibit microbial metabolism, resulting in low conversion of sugars into bioproducts. To minimize this, in this work the sisal bagasse acid hydrolysate was detoxified using the activated carbon obtained from residues of the gasification of açaí endocarp. The adsorbent properties were analyzed, and the effects of experimental parameters related to furfural adsorption were evaluated. Then, the validation of the adsorption experiments was carried out in acid hydrolyzed liquor from sisal bagasse, the fermentation tests being performed with Saccharomyces cerevisiae. Overall, the furfural adsorption in the activated carbon was fast since most of the furfural was removed in the first minutes of the experiment. The Sips isotherm fit the experimental data best, with maximum adsorption capacity of 48.02 mg.g^-1. Kinetic data fitted LDF, QDF and FD models, and diffusivity parameters were obtained. After detoxification, the activated carbon from açaí waste removed 52% of furfural, 100% of HMF and 40.4% of acetic acid with moderate loss of sugars (17%). The results confirmed that the adsorbent is effective and promising for removing furfural and other fermentation inhibitors.

Avoiding pitfalls when modeling removal of per- and polyfluoroalkyl substances by anion exchange

Per- and polyfluoroalkyl substances (PFAS) are receiving a great deal of attention from regulators, water utilities, and the general public. Anion-exchange resins have shown high capacities for removal of these substances from water, but there is currently a paucity of ion-exchange treatment models available to evaluate performance. In this work, important theoretical and practical considerations are discussed for modeling PFAS removal from drinking water using gel-type, strong-base anion-exchange resin in batch and column processes. Several important limitations found in the literature preclude movement toward model development, including the use of inappropriate isotherms, inappropriate kinetic assumptions, and experimental conditions that are not relevant to drinking water conditions. Theoretical considerations based on ion-exchange fundamentals are presented that will be of assistance to future researchers in developing models, designing batch and column experiments, and interpreting results of batch and column experiments.

Steam adsorption on molecular sieve 3A for sorption enhanced reaction processes

Steam adsorption enhanced reaction processes are a promising process intensification for many types of reactions, where water is formed as a byproduct. To assess the potential of these processes, adequate models are required that accurately describe water adsorption, particularly under the desired elevated temperatures and pressures. In this work, an adsorption isotherm is presented for H2O adsorption at 200–350 °C and 0.05–4.5 bar partial pressure on molecular sieve (LTA) 3A. The isotherm has been developed on the basis of experimental data obtained from a thermogravimetric analysis and integrated breakthrough curves. The experimental data at lower steam partial pressures can be described with a Generalized Statistical Thermodynamic Adsorption (GSTA) isotherm, whereas at higher steam partial pressures the experimental data can be adequately captured by capillary condensation. Based on the characteristics of the adsorbent particles, a linear driving force relation has been derived for the adsorption mass transfer rate and the apparent micropore diffusivity is determined. The isotherm and mass transport model presented here prove to be adequate for modelling and improved evaluation of steam adsorption enhanced reaction processes.