Radiographic and clinical evaluation of cage subsidence after stand-alone lateral interbody fusion

Insufficient endplate-bone graft contact is a risk factor for high-grade cage subsidence occurring after lateral lumbar interbody fusion supplemented with lateral plate: An analysis of 121 cases

BACKGROUND

Lateral lumbar interbody fusion (LLIF) is a minimally invasive fusion technique that can be performed with lateral plate. Insufficient contact between the endplate and bone graft may result in cage subsidence. This study aimed to investigate the potential risk factor for high-grade cage subsidence (HCS) occurring after LLIF supplemented with lateral plate.

METHODS

Between June 2017 and February 2023, 121 patients (48 males, 73 females; mean age 63.0 years; minimum follow-up period 12 months) undergoing LLIF supplemented with lateral plate were retrospectively reviewed. The incidence of HCS was assessed, and patients were categorized into HCS group or non-HCS group based on the occurrence of HCS. A revision surgery of posterior pedicle screw fixation was performed in patients with cage subsidence and complained with intolerable back pain or radicular symptoms. Comparative analyses were performed on demographic characteristics, surgical variables, and parameters related to endplate-bone graft contact between the two groups. Multivariable logistic regression analysis was employed to identify the potential risk factors associated with HCS. The receiver operating characteristic (ROC) analysis was used to calculate the cutoff values for the risk factors. Clinical outcomes were evaluated using Oswestry Disability Index (ODI), and radiographic fusion at the final follow-up was assessed based on the Bridwell grading system.

RESULTS

The HCS group comprised 12 patients, while the non-HCS group included 109 patients. The incidence of HCS occurring after LLIF supplemented with lateral plate was 9.9 %. Compared to non-HCS group, patients in HCS group had lower sagittal and coronal endplate-bone graft contact rates and larger cage-endplate angles. Low sagittal (OR, 1.099; 95 % CI, 1.033-1.169; P=0.003) and low coronal (OR, 1.149, 95 % CI, 1.061-1.243, P=0.001) endplate-bone graft contact rates were determined to be correlated with HCS. The cutoff value of the sagittal and coronal endplate-bone graft contact rate was 63.5 % and 60.9 %. Eleven (91.7 %) patients in HCS group underwent revision posterior pedicle screw fixation. Both HCS and non-HCS groups experienced significant improvements in ODI at the final follow-up, while there were no differences between groups. Ninety-five (87.2 %) patients in non-HCS group, and nine (81.8 %) of the 11 patients who underwent revision surgery in HCS group achieved radiographic fusion at the final follow-up.

CONCLUSIONS

The incidence of HCS occurring after LLIF supplemented with lateral plate was 9.9%. Insufficient endplate-bone graft contact is an important risk factor of HCS, and sagittal and coronal endplate-bone graft contact rates can be used as effective predictors for HCS.

Comparison of Hounsfield Unit, Vertebral Bone Quality, and Dual-Energy X-Ray Absorptiometry T-Score for Predicting Cage Subsidence After Posterior Lumbar Interbody Fusion

STUDY DESIGN

Retrospective cohort study.

OBJECTIVES

To compare Hounsfield unit (HU), vertebral bone quality (VBQ), and dual-energy X-ray absorptiometry (DEXA) T-score in predicting cage subsidence (CS) after posterior lumbar interbody fusion.

METHODS

We retrospectively reviewed patients undergoing PLIF and measured L4 HU and VBQ. Baseline characteristics between CS and non-CS groups were compared. Multiple logistic regression analysis was used to identify risk factors for CS. Receiver operating characteristic (ROC) curves were used to explore the predictive value of variables for CS. Subgroup analysis was conducted for patients with available DEXA results.

RESULTS

Eighty-four patients were analyzed. The subsidence group was older, with lower L4 HU (92.6 (35.4) vs 130.8 (47.8), P < 0.001) and higher VBQ (3.30 (0.64) vs 2.99 (0.63), P = 0.041) compared to the non-CS group. Low L4 HU (OR 0.979, P = 0.022) was an independent risk factor for subsidence, while VBQ was not. ROC analysis indicated that L4 HU (AUC = 0.733, P < 0.001) exhibited superior predictive performance compared to VBQ (AUC = 0.643, P = 0.032). Subgroup analysis in patients with DEXA showed that the femoral neck T-score (AUC = 0.67, P = 0.037) could differentiate CS, with L4 HU exhibiting the highest predictive ability (AUC = 0.778, P < 0.001), both outperforming VBQ (AUC = 0.645, P = 0.075).

CONCLUSIONS

Among the three BMD parameters, only low L4 HU could be an independent risk factor for CS. Preoperative HU is mandatory in patients at risk for osteoporosis when undergoing spine surgery.

Advances in implants and bone graft types for lumbar spinal fusion surgery

The increasing prevalence of spinal disorders worldwide necessitates advanced treatments, particularly interbody fusion for severe cases that are unresponsive to non-surgical interventions. This procedure, especially 360° lumbar interbody fusion, employs an interbody cage, pedicle screw-and-rod instrumentation, and autologous bone graft (ABG) to enhance spinal stability and promote fusion. Despite significant advancements, a persistent 10% incidence of non-union continues to result in compromised patient outcomes and escalated healthcare costs. Innovations in lumbar stabilisation seek to mimic the properties of natural bone, with evolving implant materials like titanium (Ti) and polyetheretherketone (PEEK) and their composites offering new prospects. Additionally, biomimetic cages featuring precisely engineered porosities and interconnectivity have gained traction, as they enhance osteogenic differentiation, support osteogenesis, and alleviate stress-shielding. However, the limitations of ABG, such as harvesting morbidities and limited fusion capacity, have spurred the exploration of sophisticated solutions involving advanced bone graft substitutes. Currently, demineralised bone matrix and ceramics are in clinical use, forming the basis for future investigations into novel bone graft substitutes. Bioglass, a promising newcomer, is under investigation despite its observed rapid absorption and the potential for foreign body reactions in preclinical studies. Its clinical applicability remains under scrutiny, with ongoing research addressing challenges related to burst release and appropriate dosing. Conversely, the well-documented favourable osteogenic potential of growth factors remains encouraging, with current efforts focused on modulating their release dynamics to minimise complications. In this evidence-based narrative review, we provide a comprehensive overview of the evolving landscape of non-degradable spinal implants and bone graft substitutes, emphasising their applications in lumbar spinal fusion surgery. We highlight the necessity for continued research to improve clinical outcomes and enhance patient well-being.

Feasibility of the Non-Window-Type 3D-Printed Porous Titanium Cage in Posterior Lumbar Interbody Fusion: A Randomized Controlled Multicenter Trial

BACKGROUND

Three-dimensionally printed titanium (3D-Ti) cages can be divided into 2 types: window-type cages, which have a void for bone graft, and non-window-type cages without a void. Few studies have investigated the necessity of a void for bone graft in fusion surgery. Therefore, the present study assessed the clinical and radiographic outcomes of window and non-window-type 3D-Ti cages in single-level posterior lumbar interbody fusion.

METHODS

A total of 70 patients were randomly assigned to receive either a window or non-window cage; 61 patients (87%) completed final follow-up (32 from the window cage group, 29 from the non-window cage group). Radiographic outcomes, including fusion rates, subsidence, and intra-cage osseointegration patterns, were assessed. Intra-cage osseointegration was measured using the intra-cage bridging bone score for the window cage group and the surface osseointegration ratio score for the non-window cage group. Additionally, we looked for the presence of the trabecular bone remodeling (TBR) sign on computed tomography (CT) images.

RESULTS

Of the 61 patients, 58 achieved interbody fusion, resulting in a 95.1% fusion rate. The fusion rate in the non-window cage group was comparable to, and not significantly different from, that in the window cage group (96.6% and 93.8%, p > 0.99). The subsidence rate showed no significant difference between the window and non-window cage groups (15.6% and 3.4%, respectively; p = 0.262). The intra-cage osseointegration scores showed a significant difference between the groups (p = 0.007), with the non-window cage group having a higher proportion of cases with a score of 4 compared with the window cage group. The TBR sign was observed in 87.9% of patients who achieved interbody fusion, with a higher rate in the non-window cage group across the entire cohort although the difference was not significant (89.7% versus 78.1%, p = 0.385).

CONCLUSIONS

Non-window-type 3D-Ti cages showed equivalent clinical outcomes compared with window-type cages and comparable interbody fusion rates. These results suggest that the potential advantages of 3D-Ti cages could be optimized in the absence of a void for bone graft by providing a larger contact surface for osseointegration.

LEVEL OF EVIDENCE

Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

Magnetic Resonance Imaging-Based Vertebral Bone Quality Score for Prediction of Cage Subsidence and Screw Loosening in Patients Undergoing Degenerative Lumbar Surgery: A Meta-analysis

OBJECTIVE

Poor bone quality is a risk factor for postoperative complications after degenerative lumbar fusion surgery. The magnetic resonance imaging-based vertebral bone quality (VBQ) score is a good tool for assessing bone quality, and this is the first meta-analysis performed to summarize the predictive value of the VBQ score for cage subsidence and screw loosening in patients undergoing degenerative lumbar surgery.

METHODS

Studies were comprehensively searched in electronic databases. The quality of the studies was assessed. The pooled sensitivity, specificity and summary receiver operating characteristic curve were calculated. Publication bias was assessed and meta-regression was conducted.

RESULTS

We ultimately included 9 studies with a total of 1,404 patients with a mean age of 60.4 years and a percentage of females of 57.0%. According to the QUADAS-2 (Quality Assessment of Diagnostic Accuracy Studies 2) tool to assess methodological quality, the quality of the included studies was relatively low and risks of bias might exist. Results showed that a high VBQ was significantly associated with cage subsidence and screw loosening, and risk factor analysis revealed that the merged odds ratio was 5.37 for cage subsidence and 3.87 for screw loosening. With a VBQ cutoff value of 3.34±0.45, the pooled sensitivity and specificity for the diagnosis of postoperative complications were 0.75 and 0.75, respectively, and the area under the curve was 0.82 (95% confidence interval, 0.78-0.85).

CONCLUSION

A high VBQ was associated with a high risk of cage subsidence and screw loosening in patients who underwent degenerative lumbar surgery. The VBQ score could be considered for identifying high-risk patients for further evaluation.

Transforaminal Lumbar Interbody Fusion with Double Banana Cages: Clinical Evaluations and Finite Element Model Analysis

STUDY DESIGN

Clinical and basic study.

OBJECTIVES

This study aimed to investigate whether transforaminal lumbar interbody fusion (TLIF) using 2 banana-shaped cages leads to good clinical outcomes.

METHODS

First, we conducted a clinical study to compare outcomes among patients who underwent TLIF using different types or numbers of cages. Propensity matched patients in each group were reviewed. Thirty-four patients who underwent surgery with 2 bullet-shaped cages (group A), 34 with a banana-shaped cage (group B), and 34 with 2 banana-shaped cages (group C) were compared. Twelve months after the surgery, bony fusion and cage subsidence were evaluated.

RESULTS

The mean amount of cage subsidence was 14.9% in group A, 19.9% in group B, and 11.8% in group C. Subsidence in group B was significantly greater than that in group C (P < .01). Radiological bony fusion was not achieved in 2 cases in group B. Second, we performed a finite element model (FEM) analysis to determine the biomechanical stress of the vertebral endplate by comparing the single-banana cage construct with a double banana-shaped cage construct. FEM analysis showed that the maximum stress of the endplate in the single-cage model was 1.72-times greater than the maximum stress in the double-cage model. Furthermore, the maximal stress in the single-cage model was significantly higher than in the double-cage model during lumbar extension and side bending.

CONCLUSION

This study showed that TLIF with double banana-shaped cages led to good clinical outcomes with less cage subsidence, probably because of decreased mechanical stress on the vertebral endplate.

Subsidence Rates Associated With Porous 3D-Printed Versus Solid Titanium Cages in Transforaminal Lumbar Interbody Fusion

STUDY DESIGN

Retrospective Cohort Study.

OBJECTIVE

To determine whether 3D-printed porous titanium (3DPT) interbody cages offer any clinical or radiographic advantage over standard solid titanium (ST) interbody cages in transforaminal lumbar interbody fusions (TLIF).

METHODS

A consecutive series of adult patients undergoing one- or two-level TLIF with either 3DPT or ST "banana" cages were analyzed for patient reported outcome measures (PROMs), radiographic complications, and clinical complications. Exclusion criteria included clinical or radiographic follow-up less than 1 year.

RESULTS

The final cohort included 90 ST interbody levels from 74 patients, and 73 3DPT interbody levels from 50 patients for a total of 124 patients. Baseline demographic variables and comorbidity rates were similar between groups (P > .05). Subsidence of any grade occurred more frequently in the ST group compared with the 3DPT group (24.4% vs 5.5%, respectively, P = .001). Further, the ST group was more likely to have higher grades of subsidence than the 3DPT group (P = .009). All PROMs improved similarly after surgery and revision rates did not differ between groups (both P > .05). On multivariate analysis, significant positive correlators with increasing subsidence grade included greater age (P = .015), greater body mass index (P = .043), osteoporosis/osteopenia (P < .027), and ST cage type (P = .019).

CONCLUSIONS

When considering interbody material for TLIF, both ST and 3DPT cages performed well; however, 3DPT cages were associated with lower rates of subsidence. The clinical relevance of these findings deserves further randomized, prospective investigation.

Risk Factors of Unsatisfactory Outcomes Requiring Additional Intervention Following Oblique Lateral Interbody Fusion

OBJECTIVE

Oblique lateral interbody fusion (OLIF) is a minimally invasive procedure for stabilizing the spine and indirectly decompressing the neural elements. There is sparse data on unsatisfactory outcomes that require additional interventions (surgery or intervention) after OLIF. This study aimed to identify the causes, and risk factors of these reintervention.

METHODS

This was a single-center retrospective study of the patients who underwent the OLIF procedure from June 2016 to March 2023. Several clinical and radiographic parameters were studied. We also analyzed associations between several potential risk factors and the reintervention following OLIF.

RESULTS

A total of 231 patients were included. Over an average of 2.5 years of follow-up, 28 patients (12.1%) required a reintervention. Adjacent segment disease (ASD) was the most common cause of reintervention. The risk factors associated with reintervention were previous surgery (adjusted odds ratio [aOR], 4.44; 95% confidence interval [CI], 1.21-16.33; p=0.02) and high preoperative Oswestry Disability Index (ODI) scores (aOR, 1.04; 95% CI, 1.00-1.08; p=0.03). Although increasing the duration of follow-up was not statistically significant, the 95% CI was consistent with an increased risk of reintervention with longer follow-up (OR, 1.18; 95% CI, 0.94-1.50).

CONCLUSION

This study showed that patients with prior lumbar surgery and high preoperative ODI scores were more likely to require additional intervention after the OLIF procedure. In addition, an increasing duration of follow-up was associated with an increased risk of reintervention. The most common reason for reintervention was ASD after OLIF.

Injectable bone cement cannulated pedicle screw for lumbar degenerative disease in osteoporosis - clinical follow-up of over 5 years

OBJECTIVE

The aim of this study is to evaluate the clinical efficacy of injectable cemented hollow pedicle screw (CICPS) in the treatment of osteoporotic lumbar degenerative diseases through a large sample long-term follow-up study. Additionally, we aim to explore the risk factors affecting interbody fusion.

METHODS

A total of 98 patients who underwent CICPS for transforaminal lumbar interbody fusion (TLIF) for osteoporotic lumbar degenerative disease from March 2011 to September 2017 were analyzed. X-ray and electronic computed tomography (CT) imaging data were collected during preoperative, postoperative, and follow-up periods. The data included changes in intervertebral space height (ΔH), screw failure, cement leakage (CL), and intervertebral fusion. The patients were divided into two groups based on their fusion status one year after surgery: satisfied group A and dissatisfied group B. Surgical data such as operation time, intraoperative bleeding volume and surgical complications were recorded, and visual analog scale (VAS) and Oswestry disability index (ODI) were used to evaluate the improvement of lumbar and leg pain.

RESULTS

The mean follow-up time was 101.29 months (ranging from 70 to 128 months). A total of 320 CICPS were used, with 26 screws (8.13%) leaking, 3 screws (0.94%) experiencing cement augmentation failure, and 1 screw (0.31%) becoming loose and breaking. The remaining screws were not loose or pulled out. Female gender, decreased bone density, and CL were identified as risk factors affecting interbody fusion (P < 0.05). Early realization of interbody fusion can effectively prevent the loss of intervertebral space height (P < 0.05) and maintain the surgical treatment effect. Both VAS and ODI scores showed significant improvement during the follow-up period (P < 0.05). Binary logistic regression analysis revealed that decreased bone density and cement leakage were risk factors for prolonged interbody fusion.

CONCLUSIONS

The results of long-term follow-up indicate that PMMA enhanced CICPS has unique advantages in achieving good clinical efficacy in the treatment of osteoporosis lumbar degenerative diseases. Attention should be paid to identify female gender, severe osteoporosis, and CL as risk factors affecting interbody fusion.

Stand-Alone Lateral Lumbar Interbody Fusion and Lateral Lumbar Interbody Fusion With Supplemental Posterior Instrumentation in the Treatment of Lumbar Degenerative Disease: A Meta-Analysis and Systematic Review

STUDY DESIGN

Systematic Review.

OBJECTIVES

Compare the outcomes of stand-alone lateral lumbar interbody fusion (LLIF) and LLIF with supplemental posterior instrumentation in the treatment of lumbar degenerative disease by a Meta-analysis.

METHODS

In this meta-analysis, we searched Pubmed, Embase, and Cochrane databases from inception to Aug 2023. In this study, only study reporting stand-alone LLIF(stand-alone group) and LLIF with supplemental posterior instrumentation (posterior instrumentation group) in the treatment of lumbar degenerative disease and we excluded duplicate publications, research without full text, incomplete information or inability to conduct data extraction, animal experiments, reviews, and systematic reviews. STATA 15.1 software was used to analyze the data.

RESULTS

Among the 15 included articles, the total number of patients was 1177, with 469 patients (638 fused segments) in the standalone group and 708 patients (1046 fused segments) in the posterior instrumentation group. The posterior instrumentation group was better than stand-alone group with significant differences in fusion rate, cage subsidence rate,the restoration of disc height and segmental lordosis, the improvement of ODI, and reoperation rate. While, comparing with posterior instrumentation group,the stand-alone group had less intraoperative blood loss.

CONCLUSIONS

Both stand-alone and instrumented LLIF were effective in improving the clinical outcomes of patients with lumbar degenerative disease. However, the stand-alone LLIF was associated with lower fusion rate, inferior maintenance of indirect decompression, and higher reoperation rate due to high-grade cage subsidence. For patients with risk factors of high-grade cage subsidence, the LLIF with posterior instrumentation may be a better choice.

Defining cage subsidence in anterior, oblique, and lateral lumbar spine fusion approaches: a systematic review of the literature

One of the most common complications of lumbar fusions is cage subsidence, which leads to collapse of disc height and reappearance of the presenting symptomology. However, definitions of cage subsidence are inconsistent, leading to a variety of subsidence calculation methodologies and thresholds. To review previously published literature on cage subsidence in order to present the most common methods for calculating and defining subsidence in the anterior lumbar interbody fusion (ALIF), oblique lateral interbody fusion (OLIF), and lateral lumbar interbody fusion (LLIF) approaches. A search was completed in PubMed and Embase with inclusion criteria focused on identifying any study that provided descriptions of the method, imaging modality, or subsidence threshold used to calculate the presence of cage subsidence. A total of 69 articles were included in the final analysis, of which 18 (26.1%) reported on the ALIF approach, 22 (31.9%) on the OLIF approach, and 31 (44.9%) on the LLIF approach, 2 of which reported on more than one approach. ALIF articles most commonly calculated the loss of disc height over time with a subsidence threshold of > 2 mm. Most OLIF articles calculated the total amount of cage migration into the vertebral bodies, with a threshold of > 2 mm. LLIF was the only approach in which most articles applied the same method for calculation, namely, a grading scale for classifying the loss of disc height over time. We recommend future articles adhere to the most common methodologies presented here to ensure accuracy and generalizability in reporting cage subsidence.

The effect of polymethylmethacrylate augmentation on the primary stability of stand-alone implant construct versus posterior stabilization in oblique lumbar interbody fusion with osteoporotic bone quality- a finite element study

BACKGROUND CONTEXT

Oblique lumbar interbody fusion (OLIF) can provide an ideal minimally invasive solution for achieving spinal fusion in an older, more frail population where decreased bone quality can be a limiting factor. Stabilization can be achieved with bilateral pedicle screws (BPS), which require additional incisions and longer operative time. Alternatively, a novel self-anchoring stand-alone lateral plate system (SSA) can be used, where no additional incisions are required. Based on the relevant literature, BPS constructs provide greater primary biomechanical stability compared to lateral plate constructs, including SSA. This difference is further increased by osteoporosis. Screw augmentation in spinal fusion surgeries is commonly used; however, in the case of OLIF, it is a fairly new concept, lacking a consensus-based guideline.

PURPOSE

This comparative finite element (FE) study aimed to investigate the effect of PMMA screw augmentation on the primary stability of a stand-alone implant construct versus posterior stabilization in OLIF with osteoporotic bone quality.

STUDY DESIGN

The biomechanical effect of screw augmentation was studied inside an in-silico environment using computer-aided FE analysis.

METHODS

A previously validated and published L2-L4 FE model with normal and osteoporotic bone material properties was used. Geometries based on the OLIF implants (BPS, SSA) were created and placed inside the L3-L4 motion segment with increasing volumes (1-6 cm3) of PMMA augmentation. A follower load of 400 N and 10 Nm bending moment (in the three anatomical planes) were applied to the surgical FE models with different bone material properties. The operated L3-L4 segmental range of motion (ROM), the inserted cage's maximal caudal displacements, and L4 cranial bony endplate principal stress values were measured.

RESULTS

The nonaugmented values for the BPS construct were generally lower compared to SSA, and the difference was increased by osteoporosis. In osteoporotic bone, PMMA augmentation gradually decreased the investigated parameters and the difference between the two constructs as well. Between 3 cm3 and 4 cm3 of injected PMMA volume per screw, the difference between augmented SSA and standard BPS became comparable.

CONCLUSIONS

Based on this study, augmentation can enhance the primary stability of the constructs and decrease the difference between them. Considering leakage as a possible complication, between 3 cm3 and 4 cm3 of injected PMMA per screw can be an adequate amount for SSA augmentation. However, further in silico, and possibly in vitro and clinical testing is required to thoroughly understand the investigated biomechanical aspects.

CLINICAL SIGNIFICANCE

This study sheds light on the possible biomechanical advantage offered by augmented OLIF implants and provides a theoretical augmentation amount for the SSA construct. Based on the findings, the concept of an SSA device with PMMA augmentation capability is desirable.

Comparison of predictive value for cage subsidence between MRI-based endplate bone quality and vertebral bone quality scores following transforaminal lumbar interbody fusion: a retrospective propensity-matched study

BACKGROUND CONTEXT

Cage subsidence after lumbar fusion can lead to many adverse outcomes. Low bone mineral density (BMD) is a widely recognized risk factor for cage subsidence. Conventional methods can predict and evaluate BMD, but there are many shortcomings. Recently, MRI-based assessment of bone quality in specific parts of the vertebral body has been proposed, including scores for vertebral bone quality (VBQ) and endplate bone quality (EBQ). However, the predictive accuracy of the two scoring systems for cage subsidence after transforaminal lumbar interbody fusion (TLIF) remains unknown. Therefore, we investigated MRI-based VBQ and EBQ scores for assessing bone quality and compared their predictive value for cage subsidence after TLIF.

PURPOSE

To compare the predictive value between MRI-based VBQ and EBQ scores for cage subsidence after TLIF.

STUDY DESIGN/SETTING

A retrospective case-control study.

PATIENTS SAMPLE

Patients with degenerative lumbar diseases underwent single-level TLIF at our medical center between 2014 and 2020, all of whom had preoperative MRIs available.

OUTCOMES MEASURES

Cage subsidence, disc height, VBQ score, EBQ score, upper and lower vertebral body bone quality (UL-VBQ) score.

METHODS

Data were retrospectively examined for a consecutive sample of 346 patients who underwent TLIF at our medical center between 2014 and 2020. Patients who subsequently experienced cage subsidence or not were matched to each other based on propensity scoring, and the two matched groups (52 patients each) were compared using conditional logistic regression to investigate the association between the potential radiographic factors and cage subsidence. Scores for VBQ and EBQ were assessed for their ability to predict cage subsidence in the matched patients based on the area under the receiver operative characteristic curve (AUC).

RESULTS

Among matched patients, those who suffered cage subsidence had significantly higher VBQ score (3.7 vs 3.1, p<.001) and EBQ score (5.0 vs 4.3, p<.001), and regression linked greater risk of subsidence to higher VBQ score (OR 4.557, 95% CI 1.076-19.291, p=.039) and higher EBQ score (OR 5.396, 95% CI 1.158-25.146, p=.032). A cut-off VBQ score of 3.4 predicted the cage subsidence among matched patients with an AUC of 0.799, sensitivity of 84.6%, and specificity of 69.2%. A cut-off EBQ score of 4.7 predicted subsidence with an AUC of 0.829, sensitivity of 76.9%, and specificity of 82.7%.

CONCLUSION

Higher VBQ and EBQ scores are associated with a greater risk of cage subsidence following TLIF, and EBQ may perform better because of greater specificity.

Short-Term Comparison Between Unilateral Versus Bilateral Percutaneous Pedicle Screw Fixation in Short-Level Lateral Lumbar Interbody Fusion-A Prospective Randomized Study

STUDY DESIGN

Prospective randomized controlled trial.

OBJECTIVES

No prospective studies have directly compared clinical and radiographic outcomes of unilateral vs bilateral instrumented lateral lumbar interbody fusion (LLIF) for lumbar degenerative disease (LDD). We compared the short-term radiographic, clinical outcomes, and some complications of the unilateral percutaneous pedicle screw (PPS) (UPS) vs bilateral PPS (BPS) fixation in short-level spinal fusion with LLIF for LDD.

METHODS

This was a prospective randomized controlled study of 33 patients who underwent UPS or BPS fixation after LLIF for LDD; 18 patients were assigned to the UPS group and 15 patients to the BPS group. Clinical outcomes, complication rates, and fusion rates were assessed.

RESULTS

The two groups were similar in age, sex, preoperative diagnosis, and level of surgery. Blood loss, length of hospital stay, and numeric rating scale score one year after surgery did not differ between groups. The operative time was longer in the BPS than UPS group (120.2 vs 88.8 min, respectively; P = .029). Both groups showed improvement in disc height and dural sac in the immediate postoperative computed tomography and magnetic resonance imaging, which did not differ significantly between groups. The subsidence grade and fusion rate did not differ, but cage subsidence was more severe in the UPS than BPS group.

CONCLUSION

Unilateral and bilateral PPS fixation after LLIF yielded similar short-term clinical and radiological outcomes. However, severe cage subsidence was more common in the UPS group, which suggests that BPS fixation after LLIF may be a better choice over the long term.

Improved intervertebral fusion in LLIF rabbit model with a novel titanium cage

BACKGROUND CONTEXT

There is no established small animal approach model for the strict simulation of lateral lumbar interbody fusion (LLIF) surgery.

PURPOSE

This study aims to establish a reliable LLIF rabbit model that strictly simulates the procedure and to preliminarily evaluate the differences in fusion outcomes with different graft materials.

STUDY DESIGN

A controlled laboratory.

METHODS

Fifty-four 4-month-old white New Zealand female and male rabbits were selected and divided into five groups: Group A (dissection group) consisted of 9 rabbits, Group B (normal approach group) consisted of 9 rabbits, Group C (autogenous iliac bone group) consisted of 12 rabbits, Group D (BMP-2 carrier material group) consisted of 12 rabbits, and Group E (allograft bone group) consisted of 12 rabbits. Based on data from Group A, a novel titanium metal fusion device was designed. Postoperatively, at the 12-week mark, manual palpation was employed to compare the interbody fusion status among Groups B, C, D, and E. Specimens from Groups C, D, and E were subjected to Micro-CT scanning to compare various parameters such as trabecular bone volume (BV), bone volume fraction (BV/TV, BVF), and bone surface area (BS). Furthermore, a tissue histopathological examination was performed to observe the structure and morphology of newly formed bone within the fusion mass as well as the remodeling of the graft in each group.

RESULTS

Based on the measurements obtained from the dissection group, we designed a U-shaped interbody fusion device with dimensions of 10 mm in length, 2.5 mm in width, and 1.3 mm in height. In Group B, 9 cases exhibited intervertebral mobility. In Group C, 1 case showed nonfusion. In Group D, all cases achieved fusion. In Group E, 4 cases did not achieve fusion. Additionally, the Micro-CT results showed that the interbody fusion index scores were 4.64±0.50 in Group C, 4.33±0.65 in Group D, and 3.36±0.81 in Group E. There was no statistically significant difference in fusion index scores between Groups C and D (p=.853). Notably, Groups C and D had higher scores than Group E (p<.001). The trabecular bone volume (BV) in Groups C and D also showed no significant difference but was significantly higher than in Group E (p<.001). Furthermore, the histopathological results revealed that the specimens from Group E had less newly formed cartilage and bone compared to Groups C and D.

CONCLUSIONS

This study successfully established a strict simulation of the clinical LLIF procedure in a rabbit model. Moreso, we conducted a preliminary validation indicating that the BMP-2 carrier material achieved interbody fusion outcomes similar to autogenous iliac bone.

CLINICAL SIGNIFICANCE

The findings of this investigation from animal models provide a theoretical basis for the clinical use of BMP-2 to promote early spinal fusion in LLIF procedures. Importantly, the study provides a small animal model foundation for research related to LLIF surgery.

Can We Rely on Prophylactic Two-Level Vertebral Cement Augmentation in Long-Segment Adult Spinal Deformity Surgery to Reduce the Incidence of Proximal Junctional Complications?

Background and Objectives: Proximal junctional kyphosis (PJK) and failure (PJF), the most prevalent complications following long-segment thoracolumbar fusions for adult spinal deformity (ASD), remain lacking in defined preventive measures. We studied whether one of the previously reported strategies with successful results-a prophylactic augmentation of the uppermost instrumented vertebra (UIV) and supra-adjacent vertebra to the UIV (UIV + 1) with polymethylmethacrylate (PMMA)-could also serve as a preventive measure of PJK/PJF in minimally invasive surgery (MIS). Materials and Methods: The study included 29 ASD patients who underwent a combination of minimally invasive lateral lumbar interbody fusion (MIS-LLIF) at L1-2 through L4-5, all-pedicle-screw instrumentation from the lower thoracic spine to the sacrum, S2-alar-iliac fixation, and two-level balloon-assisted PMMA vertebroplasty at the UIV and UIV + 1. Results: With a minimum 3-year follow-up, non-PJK/PJF group accounted for fifteen patients (52%), PJK for eight patients (28%), and PJF requiring surgical revision for six patients (21%). We had a total of seven patients with proximal junctional fracture, even though no patients showed implant/bone interface failure with screw pullout, probably through the effect of PMMA. In contrast to the PJK cohort, six PJF patients all had varying degrees of neurologic deficits from modified Frankel grade C to D3, which recovered to grades D3 and to grade D2 in three patients each, after a revision operation of proximal extension of instrumented fusion with or without neural decompression. None of the possible demographic and radiologic risk factors showed statistical differences between the non-PJK/PJF, PJK, and PJF groups. Conclusions: Compared with the traditional open surgical approach used in the previous studies with a positive result for the prophylactic two-level cement augmentation, the MIS procedures with substantial benefits to patients in terms of less access-related morbidity and less blood loss also provide a greater segmental stability, which, however, may have a negative effect on the development of PJK/PJF.

Reduced Subsidence With PEEK-Titanium Composite Versus 3D Titanium Cages in a Retrospective, Self-Controlled Study in Transforaminal Lumbar Interbody Fusion

STUDY DESIGN

Retrospective Study.

OBJECTIVES

To compare subsidence and radiographic fusion rates of titanium-surface polyetheretherketone (PEEK-Ti) and 3D-Titanium (3D-Ti) cages, implanted within the same patient concurrently, during multi-level transforaminal lumbar interbody fusions (TLIF).

METHODS

Forty-eight patients were treated with both PEEK-Ti and 3D-Ti cages during 2- or 3-level TLIF and instrumented posterolateral fusion (108 spinal levels in all). Equivalent bone graft material was implanted within each patient. Radiographic analysis of CT and/or X-ray imaging was performed retrospectively for each spinal level throughout 12-month follow-up period. Fusion was defined as bridging trabecular bone and subsidence was incursion into one/both vertebral bodies >20% cage height. Outcomes were analyzed with Fisher's exact test.

RESULTS

At 6-months post-operative follow-up, incidence of subsidence was significantly lower for PEEK-Ti cages, with 4.8% subsidence, compared to a 27.9% subsidence rate for 3D-Ti cages (P = .007). Fusion rates were comparable at 100% for PEEK-Ti and 95.5% for 3D-Ti. Results at 12-months showed similar but not statistically significant trends of less subsidence with PEEK-Ti than 3D-Ti cages (14.3% PEEK-Ti, 37.5% 3D-Ti), and similar fusion rates of 100% for PEEK-Ti and 91.7% for 3D-Ti. Thirty-nine out of 48 total patients were available for follow-up at 6 months and 20 patients at 12 months. CT availability at 6 and 12-months was 100% and 90%, respectively.

CONCLUSIONS

A significantly lower subsidence rate was associated with a PEEK-Ti cage, compared to 3D-Ti, 6 months after TLIF. Results may not be generalized across technologies due to differences in cage designs; additional research studies are warranted.

Advances in Anterolateral Approaches to the Lumbar Spine: A Focus on Technological Developments

A historical overview of the evolution of anterolateral approaches to the lumber spine and associated patient outcomes is presented. In addition, the modern incorporation of new technologies is discussed, including interbody cages, intraoperative image guidance, robotics, augmented reality, and machine learning, which have significantly improved the spine surgery safety and efficacy profile. Current challenges and future directions are also covered, emphasizing the need for further research and development, particularly in robotic assistance and machine learning algorithms.

Risk Factors of Cage Subsidence Following Oblique Lumbar Interbody Fusion: A Meta-analysis and Systematic Review

OBJECTIVES

The aim of this systematic review was to evaluate the risk factors for cage subsidence (CS) after oblique lumbar interbody fusion (OLIF).

METHODS

The cohort and case-control studies which reporting potential risk factors for CS following OLIF were searched in PubMed, Embase, and Web of Science from database inception to June 17, 2023. Two researchers independently screened the literature, extracted data, and evaluated the quality of the literature according to the Newcastle Ottawa Scale. RevMan5.3 software was used for Meta analysis. χ2 statistics and I2 statistics were used to evaluate heterogeneity, and the analysis results were represented by forest plots.

RESULTS

A total of 8 studies with 280 cases of CS from 832 patients who underwent OLIF met the inclusion criteria. Elderly patients over 60 years old (odds ratio [OR] 2.44, 95% CI 1.38-4.31, P = 0.002), osteoporosis (OR 4.18, 95% CI 2.30-7.61, P = 0.002), end plate injury (OR 5.72, 95% CI 2.32-14.11, P = 0.0002), and overdistraction of intervertebral space (OR 1.67, 95% CI 1.3 2-2.11, P < 0.0001) were potential risk factors, while Hounsfield units value of the vertebral body (OR 0.97, 95% CI 0.95-1.00, P = 0.02) is a protective factor. The number of operative segments did not increase the risk of CS.

CONCLUSIONS

Older age, osteoporosis, endplate injury, and overdistraction of the intervertebral space may increase the risk of CS after OLIF. Although the incidence rate of CS is low, implementing effective preventions is a priority for clinicians based on these risk factors.

Cervical Vertebral Bone Quality Score Independently Predicts Zero-Profile Cage Subsidence After Single-Level Anterior Cervical Discectomy and Fusion

OBJECTIVE

This is the first study to evaluate the predictive value of the cervical vertebral bone quality (VBQ) score on zero-profile cage (ZPC)subsidence after anterior cervical discectomy and fusion (ACDF) using the Hounsfield units (HU) value of computed tomography as the reference.

METHODS

A total of 89 patients with at least 1 year of follow-up who underwent single-level ACDF with ZPC were retrospectively and consecutively included. VBQ and HU value were determined from preoperative T1-weighted magnetic resonance imaging and computed tomography. Subsidence was defined as ≥2 mm of migration of the cage into the superior or inferior endplate or both using lateral cervical spine radiography. The results were subjected to statistical analysis.

RESULTS

Subsidence was observed among 16 of the 89 study patients (Subsidence rate: 18.0%). The mean VBQ score was 2.94 ± 0.820 for patients with subsidence and 2.33 ± 0.814 for patients without subsidence. The multivariable analysis demonstrated that only an increased VBQ score (odds ratio: 1.823, 95% confidence interval : 0.918,3.620, P = 0.001) was associated with an increased rate of cage subsidence. There was a significant and moderate correlation between HU and VBQ (r = -0.507, P < 0.001). Using receiver operating characteristic curves, the area under the curve was 0.785, and the most appropriate threshold of VBQ was 2.68 (sensitivity 72.7%, specificity 82.1%).

CONCLUSIONS

The VBQ score may be a valuable tool for independently predicting ZPC subsidence after single-level ACDF.

Finite Element Modeling for Biomechanical Comparisons of Multilevel Transforaminal, Posterior, and Lateral Lumbar Approaches to Interbody Fusion Augmented with Posterior Instrumentation

OBJECTIVE

Verifying the intervertebral stability of each intervertebral fusion procedure, including transforaminal, posterior, and lateral lumbar interbody fusion (TLIF, PLIF, and LLIF, respectively), and the ratio of stress on the rods and pedicle screws during initial fixation may help select a fixation procedure that reduces the risk of mechanical complications, including rod fracture and screw loosening. Thus, we aimed to assess whether these procedures could prevent mechanical complications.

METHODS

Using the finite element method (FEM), we designed 4 surgical models constructed from L2-5 as follows: posterior lumbar fusion (PLF), TLIF, PLIF, and LLIF models. Bilateral rods and each pedicle screw stress were tracked and calculated as Von Mises stress (VMS) for comparison among the PLF and other 3 interbody fusion models during flexion, extension, and side-bending movements.

RESULTS

The lowest rod VMS was LLIF, followed by PLIF, TLIF, and PLF in flexion and side bending movements. Compared with PLF, intervertebral fixation significantly reduced stress on the rods. No remarkable differences were observed in extension movements in each surgical procedure. A tendency for higher pedicle screw VMS was noted at the proximal and distal ends of the fixation ranges, including L2 and L5 screws for each procedure in all motions. Intervertebral fixation significantly reduced stress on the L2 and L5 screws, particularly in LLIF.

CONCLUSIONS

Stress on the rods and pedicle screws in the LLIF model was the lowest compared with that induced by other intervertebral fusion procedures. Therefore, LLIF may reduce mechanical complications occurrence, including rod fracture and screw loosening.

Clinical and Radiographic Outcomes of Anterior Lumbar Interbody Fusion With Anterior Plate Fixation

BACKGROUND

Reports on the outcomes following instrumented anterior lumbar interbody fusion (ALIF) with anterior plate fixation are limited. The aim of this study was to assess the clinical and radiographic outcomes of patients undergoing ALIF with anterior plate fixation.  Methods: Medical records and radiographic imaging were reviewed for 100 patients who received ALIF with anterior plate fixation between 2008 to 2021 and completed at least one year of follow-up and postoperative imaging. Prospectively collected patient data included indication for surgery, BMI, age, number and location of levels treated, complications, reoperation rates, fusion rate, and measurements of global lordosis, disc space height, and segmental angulation.  Results: A total of 100 patients were included in this study. The mean length of follow-up was 81.37 months. Changes in preoperative-to-postoperative Oswestry Disability Index (ODI) and Visual Analog Score (VAS) demonstrated improvements of 30.86% and 18.56%, respectively. Major vascular injuries occurred in 3% of the cases. A hardware failure rate of 5% was observed. The reoperation rate was 10%. The radiographic fusion rate derived from computed tomography (CT) and plain film was 95.45% and 88.87%, respectively. Postoperative global lordosis demonstrated a 6.08% increase. Postoperative segmental angulation measurements increased by 57.74%. No statistically significant differences in clinical or radiographic outcomes were observed based on the spine level of fusion or the number of fusions performed.  Conclusions: ALIF with anterior plate fixation achieved an adequate fusion rate with improvements in ODI and VAS scores meeting minimal clinically important difference thresholds. Postoperative disc space heights demonstrated significant improvements compared to preoperative measurements.

Factors associated with intervertebral cage subsidence in posterior lumbar fusion

BACKGROUND

The interbody fusion apparatus is a key component of the operation and plays a key role in the postoperative efficacy. Cage subsidence is one of the common complications after lumbar fusion and internal fixation. Clinical studies on the risk factors of cage subsidence are incomplete and inaccurate, especially paravertebral muscle atrophy and intervertebral bone fusion time.

METHODS

Among the patients who underwent PLIF surgery in our hospital from January 2016 to January 2019, 30 patients with cage subsidence and 30 patients without cage subsidence were randomly selected to be included in this study. The differences between the two groups were compared, and the relevant factors of cage subsidence were explored by single factor comparison and multiple logistic regression analysis.

RESULTS

Bone mineral density (T) of the subsidence group [(- 1.84 ± 1.81) g/cm2 vs (- 0.87 ± 1.63) g/cm2, P = 0.018] was significantly lower than that of the normal group. There were 4 patients with end plate injury in the subsidence group (P = 0.038). Preoperative end plate Modic changes [I/II/III, (7/2/2) vs (2/5/8), P = 0.043] were significantly different between the two groups. In the subsidence group, preoperative rCSA of psoas major muscle [(1.43 ± 0.40) vs (1.64 ± 0.41), P = 0.043], CSA of paravertebral muscle [(4530.25 ± 776.55) mm2 vs (4964.75 ± 888.48) mm2, P = 0.047], paravertebral muscle rCSA [(3.03 ± 0.72) vs (3.84 ± 0.73), P < 0.001] and paravertebral muscle rFCSA [(2.29 ± 0.60) vs (2.89 ± 0.66), P < 0.001] were significantly lower than those in normal group. In the subsidence group, the vertebral body area [(1547.81 ± 309.89) mm2 vs (1326.48 ± 297.21) mm2, P = 0.004], the height of the immediately corrected vertebral space [(2.86 ± 1.10) mm vs (1.65 ± 1.02) mm, P = 0.020], immediately SL corrective Angle [(5.81 + 4.71)° vs (3.24 + 3.57) °, P = 0.009), postoperative PI-LL [(11.69 + 6.99)° vs (6.66 + 9.62) °, P = 0.029] and intervertebral fusion time [(5.38 ± 1.85) months vs (4.30 ± 1.49) months, P = 0.023] were significantly higher than those in the normal group. Multivariate logistic regression analysis showed that the time of intervertebral fusion (OR = 1.158, P = 0.045), the height of immediate intervertebral space correction (OR = 1.438, P = 0.038), and the Angle of immediate SL correction (OR = 1.101, P = 0.019) were the risk factors for cage subsidence. Bone mineral density (OR = 0.544, P = 0.016) and preoperative paravertebral muscle rFCSA (OR = 0.525, P = 0.048) were protective factors.

CONCLUSION

Intervertebral fusion time, correctable height of intervertebral space, excessive Angle of immediate SL correction, bone mineral density and preoperative paravertebral muscle rFCSA are risk factors for cage subsidence after PLIF.

Da Vinci Robotic Assistance for Anterolateral Lumbar Arthrodesis: Results of a French Multicentric Study

BACKGROUND

The da Vinci robot (DVR) is the most widely used robot in abdominal, urological, and gynecological surgery. Due to its minimally invasive approach, the DVR has demonstrated its effectiveness and improved safety in these different disciplines. The aim of our study was to report its use in an anterior approach of complex lumbar surgery.

METHODS

In a retrospective multicenter observational study, 10 robotic-assisted procedures were performed from March 2021 to May 2022. Six oblique lumbar interbody fusion procedures and 4 lumbar corpectomies were performed by anterolateral approach assisted by the DVR. The characteristics of the patients and the intraoperative and postoperative data were recorded.

RESULTS

Six men and 4 women underwent surgery (mean age 50.5 years; body mass index 28.6 kg/m2). No vascular injuries were reported, and no procedures required conversion to open surgery. Mean surgical time were 219 minutes for 1-level oblique lumbar interbody fusion (3 patients), 286 minutes for 2-level oblique lumbar interbody fusion (3 patients), and 390 minutes for corpectomy (4 patients). Four patients experienced nonserious adverse events due to lumbar plexus nerve damage. One patient had a vertebral body plate fracture requiring posterior revision surgery, and 1 patient had a psoas hematoma requiring transfusion. No abdominal wall complications or surgical site infection were found. Seven patients were reviewed at 12 months, none had complications, and all showed radiological evidence of fusion.

CONCLUSIONS

The use of the DVR in lumbar surgery allows a safe minimally invasive transperitoneal approach, but to date, only hybrid procedures have been performed.

Modic Changes Increase the Cage Subsidence Rate in Spinal Interbody Fusion Surgery: A Systematic Review and Network Meta-Analysis

OBJECTIVE

To compare the effect of different Modic changes (MC) grades on the cage subsidence rate after spinal interbody fusion surgery.

METHODS

We comprehensively searched the PubMed, Embase, and Web of Science databases from inception to August 13, 2023, for relevant randomized controlled trials and prospective and retrospective cohort studies. Review Manager 5.3 and STATA13.0 were used to conduct this meta-analysis. The subsidence rate was assessed using relative risk and 95% confidence intervals.

RESULTS

Six studies with a total of 716 segments were allocated to four groups according to the type of MC. The subsidence rate in the non-Modic changes (NMC) was significantly lower than that in the MC. The subsidence rate in the NMC was significantly lower than that in the MC in the subgroup of cages with extra instrumentation. No significant difference was identified between the 2 groups in the oblique lumbar interbody fusion subgroup. The subsidence rate in the NMC was significantly lower than that in the MC in the transforaminal lumbar interbody fusion subgroup. The subsidence rate in the NMC was significantly lower than that in the MC1 and MC2. We found no significant difference between NMC and MC3, MC1 and MC2, MC1 and MC3, or MC2 and MC3.

CONCLUSIONS

MC may be associated with a higher cage subsidence rate. With the increase in MC grades, the incidence of subsidence decreased gradually, but it was always higher than that in the NMC. Oblique lumbar interbody fusion may be a better choice for the treatment of lumbar degenerative disease with MC.

Risk Factors for Subsidence Following Anterior Lumbar Interbody Fusion

STUDY DESIGN

Retrospective cohort.

OBJECTIVE

Anterior lumbar interbody fusion (ALIF) may be complicated by subsidence, which can lead to significant morbidity including pain, disc space collapse, neural compression, segmental kyphosis, instability, and vertebral body fracture. This study sought to identify patient and procedural risk factors for subsidence in patients undergoing ALIF.

METHODS

This study analyzed consecutive patients who underwent ALIF at a single institution with a minimum of 2 years follow-up. Patients were grouped as either Non-Subsidence (NS-ALIF) or Cage Subsidence (CS-ALIF) based on the final postoperative radiograph. Demographic variables, operative characteristics, and radiographic outcomes were evaluated to identify significant predictors on univariate and multivariate statistics.

RESULTS

144 patients (170 levels) were included with an average follow-up of 50.70 ± 28.44 months (4.23 years). The incidence of subsidence was 22.94% (39/170 levels). On univariate statistics, the CS-ALIF group was significantly older (P = .020), had higher BMI (P = .048), worse ASA (P = .001), higher prevalence of comorbid osteoporosis (P < .001), and a more anteriorly placed interbody device (P = .005). On multivariate analysis, anterior cage placement remained the only significant predictor (OR: 1.08, 95% CI: 1.03-1.14; P = .003). There was a significantly higher rate of subsequent adjacent segment surgery among the CS-ALIF group (P = .035).

CONCLUSION

Factors contributing to subsidence in ALIF included older age, higher BMI, severe ASA, and osteoporosis, while anterior cage placement remained the only independent predictor on multivariate analysis. Subsidence was associated with a higher rate of subsequent adjacent segment surgery. Surgical technique should optimize placement of the interbody cage and avoid overstuffing the disc space.

Biomechanical differences between two different shapes of oblique lumbar interbody fusion cages on whether to add posterior internal fixation system: a finite element analysis

BACKGROUND

Oblique lateral lumbar fusion (OLIF) is widely used in spinal degeneration, deformity and other diseases. The purpose of this study was to investigate the biomechanical differences between two different shapes of OLIF cages on whether to add posterior internal fixation system, using finite element analysis.

METHODS

A complete three-dimensional finite element model is established and verified for L3-L5. Surgical simulation was performed on the verified model, and the L4-L5 was the surgical segment. A total of the stand-alone group (Model A1, Model B1) and the BPSF group (Model A2, Model B2) were constructed. The four OLIF surgical models were: A1. Stand-alone OLIF with a kidney-shaped Cage; B1. Stand-alone OLIF with a straight cage; A2. OLIF with a kidney-shaped cage + BPSF; B2. Stand-alone OLIF with a straight cage + BPSF, respectively. The differences in the range of motion of the surgical segment (ROM), equivalent stress peak of the cage (ESPC), the maximum equivalent stress of the endplate (MESE) and the maximum stress of the internal fixation (MSIF) were compared between different models.

RESULTS

All OLIF surgical models showed that ROM declines between 74.87 and 96.77% at L4-L5 operative levels. The decreasing order of ROM was Model A2 > Model B2 > Model A1 > Model A2. In addition, the ESPC and MESE of Model A2 are smaller than those of other OLIF models. Except for the left-bending position, the MSIF of Model B2 increased by 1.51-16.69% compared with Model A2 in each position. The maximum value of MESE was 124.4 Mpa for Model B1 in the backward extension position, and the minimum value was 7.91 Mpa for Model A2 in the right rotation. Stand-alone group showed significantly higher ROMs and ESPCs than the BPSF group, with maximum values of 66.66% and 70.59%. For MESE, the BPSF group model can be reduced by 89.88% compared to the stand-alone group model.

CONCLUSIONS

Compared with the traditional straight OLIF cage, the kidney-shaped OLIF cage can further improve the stability of the surgical segment, reduce ESPC, MESE and MSIF, and help to reduce the risk of cage subsidence.

Predictors of Subsidence and its Clinical Impact After Expandable Cage Insertion in Minimally Invasive Transforaminal Interbody Fusion

STUDY DESIGN

Retrospective review of prospectively collected multisurgeon data.

OBJECTIVE

Examine the rate, clinical impact, and predictors of subsidence after expandable minimally invasive transforaminal lumbar interbody fusion (MI-TLIF) cage.

SUMMARY OF BACKGROUND DATA

Expandable cage technology has been adopted in MI-TLIF to reduce the risks and optimize outcomes. Although subsidence is of particular concern when using expandable technology as the force required to expand the cage can weaken the endplates, its rates, predictors, and outcomes lack evidence.

MATERIALS AND METHODS

Patients who underwent 1 or 2-level MI-TLIF using expandable cages for degenerative lumbar conditions and had a follow-up of >1 year were included. Preoperative and immediate, early, and late postoperative radiographs were reviewed. Subsidence was determined if the average anterior/posterior disc height decreased by >25% compared with the immediate postoperative value. Patient-reported outcomes were collected and analyzed for differences at the early (<6 mo) and late (>6 mo) time points. Fusion was assessed by 1-year postoperative computed tomography.

RESULTS

One hundred forty-eight patients were included (mean age, 61 yr, 86% 1-level, 14% 2-level). Twenty-two (14.9%) demonstrated subsidence. Although statistically not significant, patients with subsidence were older, had lower bone mineral density, and had higher body mass index and comorbidity burden. Operative time was significantly higher ( P = 0.02) and implant width was lower ( P < 0.01) for subsided patients. Visual analog scale-leg was significantly lower for subsided patients compared with nonsubsided patients at a >6 months time point. Long-term (>6 mo) patient-acceptable symptom state achievement rate was lower for subsided patients (53% vs . 77%), although statistically not significant ( P = 0.065). No differences existed in complication, reoperation, or fusion rates.

CONCLUSIONS

Of the patients, 14.9% experienced subsidence predicted by narrower implants. Although subsidence did not have a significant impact on most patient-reported outcome measures and complication, reoperation, or fusion rates, patients had lower visual analog scale-leg and patient-acceptable symptom state achievement rates at the >6-month time point.

LEVEL OF EVIDENCE

Level 4.

Reverse Lumbar Pedicle Screw in Oblique Lateral Interbody Fusion: A Novel Concept to Restrict Cage Subsidence

OBJECTIVE

Cage subsidence is a common morbidity after oblique lumbar interbody fusion (OLIF), with risk of compromising clinical and radiographic outcomes. The study aims to describe an innovative reverse lumbar pedicle screw (RLPS) technique in OLIF and compare its effect on restricting cage subsidence with classical lateral fixation (LF) in radiological and clinical evaluation.

METHOD

Consecutive patients having undergone single-level OLIF-LF/RLPS from 2018 to 2020 were retrospectively reviewed. In OLIF-RLPS, the upper entry point was determined at the intersection between one horizontal line (1 cm above inferior endplate) and one vertical line (dissecting anterior and middle thirds of the vertebra) while the inferior entry point between one horizontal line (5 mm below superior endplate) and the same vertical line. Trajectories were from vertebrae reverse into contralateral pedicle. Radiological evaluation included disc height (DH) and segmental lordosis (SL); cage subsidence was evaluated by DH loss. Clinical assessment included visual analogue scale (VAS) and Oswestry disability index (ODI). Student t or Mann-Whitney U test was used for continuous variation according to normality analysis while Chi-square test for category variation.

RESULTS

A total of 29 patients had been enrolled in the study including 14 cases in the RLPS group and 15 cases in the LF group. The DH in the OLIF-RLPS group had increased from the preoperative 9.07 ± 1.73 mm to 13.73 ± 1.83 mm postoperatively, without significant difference compared with the OLIF-LF group during the perioperative, but decreased to 12.53 ± 1.74 mm in 3 months and maintained at 12.00 ± 1.45 mm in 12 months, significantly higher than the OLIF-LF group (p < 0.05). At the last follow-up, 7.1% (1/14) cases in the OLIF-RLPS group had shown subsidence of grade I, significantly less than 46.7% (7/15) cases in the OLIF-LF group. Pain and disability had improved similarly in two groups, without significant difference detected between two groups at the last follow-up.

CONCLUSION

RLPS technique with modified entry points and prolonged trajectory could effectively restrict cage subsidence in OLIF postoperatively compared with traditional lateral fixation.

Comparison of Intraoperative Endplate Injury between Mini-Open Lateral Lumbar Interbody Fusion (LLIF) and Transforaminal Lumbar Interbody Fusion (TLIF) and Analysis of Risk Factors: A Retrospective Study

OBJECTIVE

The study aimed to compare the incidence of intraoperative endplate injury in patients who underwent Transforaminal interbody fusion (TLIF) and mini-open lumbar interbody fusion (LLIF) surgery. The independent risk factors related to endplate injury in LLIF procedure were analyzed.

METHODS

A total of 199 patients who underwent LLIF (n = 106) or TLIF (n = 93) surgery from June 2019 to September 2021 were reviewed. The endplate injury was assessed by postoperative sagittal CT scan. A binary logistic analysis model were used to identify independent risk factors related to LLIF endplate injury based on univariate analysis.

RESULTS

There was an obvious difference in the occurrence of intraoperative endplate injury between LLIF (42/106, 39.6%) and TLIF group (26/93, 28%), although it did not reach the significant level. L1 CT value (OR = 0.985, 95% CI = 0.972-0.998), cage position (OR = 3.881, 95% CI = 1.398-10.771) and height variance (OR = 1.263, 95% CI = 1.013-1.575) were independent risk factors for endplate injury in LLIF procedure. According to the cage settlement patterns, there 5 types of A to E. The severity of the facet joint degeneration was positively related to the occurrence of endplate injury.

CONCLUSIONS

The incidence of intraoperative endplate injury is higher in LLIF than in TLIF procedures. Low bone quantity, cage posterior position and larger height variance are risk factors to induce endplate injury in LLIF surgery. The facet joint degeneration may be related to severe endplate injuries and even fractures.

Oblique lateral internal fusion combined with percutaneous pedicle screw fixation in severe lumbar spinal stenosis: clinical and radiographic outcome

BACKGROUND

Oblique lumbar interbody fusion (OLIF) has been a popular technique for treating lumbar degenerative diseases. Previous studies have shown its efficiency in lumbar spinal stenosis; yet, only a few studies have investigated its application to severe lumbar spinal stenosis. Herein, we investigated the clinical and radiographic outcome of OLIF with percutaneous pedicle screws in the treatment of severe lumbar spinal stenosis.

METHODS

A total of 15 patients who underwent OLIF with percutaneous pedicle screws were retrospectively analysed. All patients were diagnosed with severe lumbar stenosis (Schizas grade C or D) through preoperative magnetic resonance image (MRI) and received OLIF combined with percutaneous pedicle screw surgery. Clinical outcomes, including visual analogue scale (VAS)-back and VAS-leg scores, and Oswestry Disability Index (ODI), as well as mean disc height (DH), mean foraminal height (FH), segmental lumbar lordosis (SLL) and cross-sectional area (CSA) of the spinal canal, were analysed before and after surgery and at the last follow-up. Intraoperative data, complications and fusion rate were also investigated.

RESULTS

OLIF combined with percutaneous pedicle screws was performed on 18 segments in 15 patients. Mean follow-up was 23.1 ± 4.6 months (range 15-29 months). VAS-back, VAS-leg, and ODI scores were significantly improved at the last follow-up. DH increased from 8.86 ± 3.06 mm before surgery to 13.31 ± 2.14 mm after; at the last follow-up, DH was 11.69 ± 1.87 mm. FH increased from 17.85 ± 2.26 mm before surgery to 22.09 ± 1.36 mm after; at the last follow-up, FH was 20.41 ± 0.99 mm. CSA of the spinal canal increased from 30.83 ± 21.15 mm2 before surgery to 74.99 ± 33.65 mm2 after the operation and 81.22 ± 35.53 mm2 at the last follow-up. The segmental LL before surgery, after surgery and at last follow-up was 20.27 ± 6.25 degrees, 20.83 ± 6.52 degrees and 19.75 ± 5.87 degrees, respectively. All patients have gained fusion at the last follow-up.

CONCLUSION

OLIF with percutaneous pedicle screws could achieve satisfactory clinical and radiographic effects through indirect compression by increasing DH, FH and CSA of the spinal canal in severe lumbar stenosis patients.

A comparative analysis of using cage acrossing the vertebral ring apophysis in normal and osteoporotic models under endplate injury: a finite element analysis

Background: Lateral lumbar fusion is an advanced, minimally invasive treatment for degenerative lumbar diseases. It involves different cage designs, primarily varying in size. This study aims to investigate the biomechanics of the long cage spanning the ring apophysis in both normal and osteoporotic models, considering endplate damage, using finite element analysis. Methods: Model 1 was an intact endplate with a long cage spanning the ring apophysis. Model 2 was an endplate decortication with a long cage spanning the ring apophysis. Model 3 was an intact endplate with a short cage. Model 4 was an endplate decortication with a short cage. On the basis of the four original models, further osteoporosis models were created, yielding a total of eight finite element models. The provided passage delineates a study that elucidates the utilization of finite element analysis as a methodology to simulate and analyze the biomechanical repercussions ensuing from the adoption of two distinct types of intervertebral fusion devices (cages) within the physiological framework of a human body. Results: The investigation found no appreciable changes between Models 1 and 2 in the range of motion at the fixed and neighboring segments, the L3-4 IDP, screw-rod stress, endplate stress, or stress on the trabecular bone of the L5. Increases in these stresses were seen in models 3 and 4 in the ranges of 0.4%-676.1%, 252.9%-526.9%, 27.3%-516.6%, and 11.4%-109.3%, respectively. The osteoporotic models for scenarios 3 and 4 exhibit a similar trend to their respective normal bone density models, but these osteoporotic models consistently have higher numerical values. In particular, except for L3-4 IDP, the maximum values of these parameters in osteoporotic Models 3 and 4 were much higher than those in normal bone quality Models 1 and 2, rising by 385.3%, 116%, 435.1%, 758.3%, and 786.1%, respectively. Conclusion: Regardless of endplate injury or osteoporosis, it is advised to utilize a long cage that is 5 mm longer on each side than the bilateral pedicles because it has good biomechanical features and may lower the likelihood of problems after surgery. Additionally, using Long cages in individuals with osteoporosis may help avoid adjacent segment disease.

Comparison between Three-Dimensional Printed Titanium and PEEK Cages for Cervical and Lumbar Interbody Fusion: A Prospective Controlled Trial

OBJECTIVES

The three-dimensional printing titanium (3DPT) cage with excellent biomechanical properties and osseointegration capabilities has been initially used in spinal fusion, while the polyetheretherketone (PEEK) cage, a bioinert material device, has been a widely used for decades with relatively excellent clinical outcomes. This study was performed to investigate the early radiographic and clinical outcomes of 3DPT cage versus PEEK cage in patients undergoing anterior cervical discectomy and fusion (ACDF) and transforaminal lumbar interbody fusion (TLIF).

METHODS

This prospective controlled trial, from December 2019 to June 2022, included patients undergoing ACDF and TLIF with 3DPT cages and compared them to patients using PEEK cages for treating spinal degenerative disorders. The outcome measures included radiographic parameters (intervertebral height [IH], subsidence, fusion status, and bone-cage interface contact) and clinical outcomes (Japanese Orthopaedic Association [JOA], Neck Disability Index [NDI], Oswestry Disability Index [ODI], Short Form 12-Item Survey [SF-12], Visual Analog Scale [VAS], and Odom's criteria). Student's independent samples t test and Pearson's chi-square test were used to compare the outcome measures between the two groups before surgery and at 1 week, 3 and 6 months after surgery.

RESULTS

For the patients undergoing ACDF, the 3DPT (18 patients/[26 segments]) and PEEK groups (18 patients/[26 segments]) had similar fusion rates at 3 months and 6 months follow-up (3 months: 96.2% vs. 83.3%, p = 0.182; 6 months: 100% vs. 91.7%, p = 0.225). The subsidence in the 3DPT group was significantly lower than that in the PEEK group (3 months: 0.4 ± 0.2 mm vs. 0.9 ± 0.7 mm p = 0.004; 6 months: 0.7 ± 0.3 mm vs. 1.5 ± 0.8 mm, p < 0.001). 3DPT and PEEK cage all achieved sufficient contact with the cervical endplates. For the patients undergoing TLIF, the 3DPT (20 patients/[26 segments]) and PEEK groups (20 patients/[24 segments]) had no statistical difference in fusion rate (3 months: 84.6% vs. 58.3%, p = 0.059; 6 months: 92.3% vs. 75%, p = 0.132). The subsidence was lower than that in the PEEK group without significantly difference (3 months: 0.9 ± 0.7 mm vs.1.2 ± 0.9 mm p = 0.136; 6 months: 1.6 ± 1.0 mm vs. 2.0 ± 1.0 mm, p = 0.200). At the 3-month follow-up, the bone-cage interface contact of the 3DPT cage was significantly better than that of the PEEK cage (poor contact: 15.4% vs. 75%, p < 0.001). The values of UAR were higher in the 3DPT group than in the PEEK group during the follow-up in cervical and lumbar fusion, there were more statistical differences in lumbar fusion. There were no significant differences in the clinical assessment between 3DPT or PEEK cage in spinal fusion.

CONCLUSION

The 3DPT cage and PEEK cage can achieve excellent clinical outcomes in cervical and lumbar fusion. The 3DPT cage has advantage in fusion quality, subsidence severity, and bone-cage interface contact than PEEK cage.

Clinical, Radiographic and Fusion Comparison of Oblique Lumbar Interbody Fusion (OLIF) stand-alone and OLIF with posterior pedicle screw fixation in patients with degenerative spondylolisthesis

PURPOSE

To compare the outcomes and characteristics of oblique lumbar interbody fusion stand-alone (OLIF-SA) and OLIF with posterior pedicle screw fixation (OLIF-PPS) in the treatment of Grade I or Grade II degenerative lumbar spondylolisthesis.

PATIENTS AND METHODS

Between January 2019 and May 2022, 139 patients with degenerative spondylolisthesis were treated with OLIF-SA (n = 85) or OLIF-PPS (n = 54). The clinical and radiographic records were reviewed.

RESULTS

The clinical and radiographic outcomes were similar in both groups. The operative time and intraoperative blood loss in the OLIF-SA group were lower than those in the OLIF-PPS group (P < 0.05). However, the OLIF-PPS group had significantly better disc height (DH) and postoperative forward spondylolisthesis distance (FSD) improvement at 6 months (P < 0.05). The OLIF-PPS group had a significantly lower cage subsidence value than the OLIF-SA group (P < 0.05). Improvement of the lumbar lordotic angle (LA) and fusion segmental lordotic angle (FSA) in the OLIF-PPS group was significantly better than that in the OLIF-SA group (P < 0.05). In terms of fusion types, the OLIF-SA group tended to undergo fusion from the edge of the vertebral body. Fusion in the OLIF-PPS group began more often in the bone graft area of the central cage of the vertebral body. The fusion speed of the OLIF-SA group was faster than that of the OLIF-PPS group.

CONCLUSION

OLIF-SA has the advantages of a short operative time, less intraoperative blood loss, and reduced financial burden, while PPS has incomparable advantages in the reduction of spondylolisthesis, restoration of lumbar physiological curvature, and long-term maintenance of intervertebral DH. In addition, the SA group had a unique vertebral edge fusion method and faster fusion speed.

Application of self-anchored lateral lumbar interbody fusion in lumbar degenerative diseases

STUDY DESIGN

This is a retrospective study.

OBJECTIVE

The aim of the study was to evaluate the efficacy of self-anchored lateral lumbar interbody fusion (SA-LLIF) in lumbar degenerative diseases.

METHODS

Forty-eight patients with lumbar degenerative disease between January 2019 and June 2020 were enrolled in this study. All patients complained of low back and leg pain, which were aggravated during standing activities and alleviated or disappeared during lying. After general anesthesia, the patient was placed in the right decubitus position. The anterior edge of the psoas major muscle was exposed through an oblique incision of approximately 6 cm, using an extraperitoneal approach. The psoas major muscle was then properly retracted dorsally to expose the disc. After discectomy, a suitable cage filled with autogenous bone graft from the ilium was implanted. Two anchoring plates were inserted separately into the caudal and cranial vertebral bodies to lock the cage. Clinical efficacy was evaluated using the visual analog scale (VAS) and Oswestry Disability Index (ODI). Lumbar lordosis, intervertebral disc height, spondylolisthesis rate, cage subsidence and fusion rate were also recorded.

RESULTS

A total of 48 patients were enrolled in this study, including 20 males and 28 females, aged 61.4 ± 7.3 (range 49-78) years old. Surgery was successfully performed in all patients. Lumbar stenosis and instability were observed in 22 cases, disc degenerative disease in eight cases, degenerative spondylolisthesis in nine cases, degenerative scoliosis in six cases, and postoperative revision in three cases. In addition, five patients were diagnosed with osteoporosis. The index levels included L2-3 in three patients, L3-4 in 13 patients, L4-5 in 23 patients, L2-4 in three patients, and L3-5 in six patients. The operation time was 81.1 ± 6.4 (range 65-102) min. Intraoperative blood loss was 39.9 ± 8.5 (range 15-72) mL. No severe complications occurred, such as nerve or blood vessel injuries. The patients were followed up for 11.7 ± 2.3 (range 4-18) months. At the last follow-up, the VAS decreased from 6.2 ± 2.3 to 1.7 ± 1.1, and the ODI decreased from 48.4% ± 11.2% to 10.9% ± 5.5%. Radiography showed satisfactory postoperative spine alignment. No cage displacement was found, but cage subsidence 2-3 mm was found in five patients without obvious symptoms, except transient low back pain in an obese patient. The lumbar lordosis recovered from 36.8° ± 7.9° to 47.7° ± 6.8°, and intervertebral disc height recovered from 8.2 ± 2.0 mm to 11.4 ± 2.5 mm. The spondylolisthesis rate decreased from 19.9% ± 4.9% to 9.4% ± 3.2%. The difference between preoperative and last follow-up was statistically significant (P<0.05).

CONCLUSION

SA-LLIF can provide immediate stability and good results for lumbar degenerative diseases with a standalone anchored cage without posterior internal fixation.

Oblique lateral interbody fusion combined with unilateral versus bilateral posterior fixation in patients with osteoporosis

PURPOSE

To compare the clinical efficacy of oblique lateral interbody fusion (OLIF) combined with unilateral (UPSF) and bilateral pedicle screw internal fixation (BPSF) in patients with osteoporosis.

METHODS

Clinical data of 57 patients who underwent single-segment OLIF surgery with a clear diagnosis of osteoporosis from December 2018 to May 2021 were retrospectively analyzed, of which 27 patients underwent OLIF + UPSF and 30 patients underwent OLIF + BPSF. Surgical technique-related indexes were recorded, including operative time, operative blood loss and postoperative hospital stay; clinical outcome-related indexes included postoperative complications, Visual analogue scale (VAS) and Oswestry disability index (ODI) at preoperative, 1 week, 1 month, 3 months, and 12 months postoperative follow-up; and imaging outcome-related indexes included the measurement of preoperative and postoperative segmental lordosis (SL), and observation of the degree of cage subsidence and bone graft fusion.

RESULTS

The surgery was successfully performed in 57 patients, and there was no statistical difference in operative blood loss and postoperative hospital stay between UPSF group and BPSF group (P > 0.05). In terms of operative time, there was a significant difference (UPSF group: 92.30 ± 11.03 min, BPSF group: 119.67 ± 16.41, P < 0.05). Postoperative VAS and ODI scores exhibited significant improvement (P < 0.05). At the 12 months postoperative follow-up, the VAS and ODI scores in the BPSF group were significantly better than those in the UPS group (P < 0.05). Compared with the preoperative images, the SL was significantly improved in both groups after surgery (P < 0.05). At 6 months postoperatively, the fusion rate in the UPSF group was significantly lower than that in the BPSF group (P < 0.05). At 1 year postoperatively, the fusion rate in the UPSF group was not significantly different from that in the BPSF group (P > 0.05). At 1 year postoperatively, the rate and degree of cage subsidence was higher in the UPSF group than in the BPSF group (P < 0.05).

CONCLUSION

In the long term, OLIF combined with bilateral posterior fixation applied to the osteoporosis patients is superior to OLIF surgery combined with unilateral posterior fixation in terms of clinical and imaging outcomes. It is effective in improving pain relief and functional improvement, accelerating bone graft fusion, and reducing cage subsidence compared with UPSF.

The effect of Modic changes on the fusion rates of posterior interbody fusion surgery

BACKGROUND

Modic changes have been correlated to low back pain, spinal instability. The objective of this study was to evaluate the effect of Modic changes on the fusion rates of instrumented posterior interbody fusion surgery (PLIF).

METHODS

The study included patients who underwent PLIF surgery between 2015-2019.The patients were separated into four groups according to Modic changes detected in the preoperative MRI. Fusion, subsidence were evaluated with postoperative CT and X-ray. Body mass index (BMI) and bone mineral density (BMD) of the patients were also evaluated.

RESULTS

The study included 137 operated discs of 86 patients. There was no statistical difference between groups regarding age, gender, follow-up period, BMI, and BMD. There were 70 levels with no Modic changes (M0), 26 levels with Modic type 1 (M1), 21 levels with Modic type 2 (M2), and 16 with Modic type 3 (MC3) change. The rate of successful fusion was 92.9% in M0, 92.3% in M1, 93% in M2, and 93.7% in M3. The rate of high-grade subsidence was 28.5% in M0, 26.8% in M1, 27.5% in M2, and 24.9% in M3. There was no statistically difference between the patients regarding subsidence grade or fusion rate.

CONCLUSIONS

Modic changes were not observed to be directly correlated to the radiological outcomes of instrumented posterior interbody fusion. The fusion rate demonstrated homogenous distribution between the Modic groups and the subsidence rate was slightly higher in MC1 and MC2 than in MC3 and MC0.

Antepsoas Approaches to the Lumbar Spine

Lumbar interbody fusion (LIF) is a well-established approach in treating spinal deformity and degenerative conditions of the spine. Since its inception in the 20th century, LIF has continued to evolve, allowing for minimally invasive approaches, high fusion rates, and improving disability scores with favorable complication rates. The anterior to the psoas (ATP) approach utilizes a retroperitoneal pathway medial to the psoas muscle to access the L1-S1intervertebral disc spaces. In contrast to the transpsoas arppoach, its primary advantage is avoiding transgressing the psoas muscle and the contained lumbar plexus, which potentially decreases the risk of injury to the lumbar plexus. Avoiding transgression of the psoas may minimize the risk of transient or permanent neurological deficits secondary to lumbar plexus injury. Indications for ATP approaches may expand as it is shown to be a safe and effective method of achieving spinal arthrodesis.

MRI-based vertebral bone quality score for predicting cage subsidence by assessing bone mineral density following transforaminal lumbar interbody fusion: a retrospective analysis

PURPOSE

This is the first study to evaluate the predictive value of the vertebral bone quality (VBQ) score on cage subsidence after transforaminal lumbar interbody fusion (TLIF) in a Chinese population using the spinal quantitative computed tomography (QCT) as the clinical standard. Meanwhile, the accuracy of the MRI-based VBQ score in bone mineral density (BMD) measurement was verified.

METHODS

We performed a retrospective study of patients who underwent single-level TLIF from 2015 to 2020 with at least 1 year of follow-up. Cage subsidence was measured using postoperative radiographic images based on cage protrusion through the endplates more than 2 mm. The VBQ score was measured on T1-weighted MRI. The results were subjected to statistical analysis.

RESULTS

A total of 283 patients (61.1% of female) were included in the study. The subsidence rate was with 14.1% (n = 40), and the average cage subsidence was 2.3 mm. There was a significant difference in age, sex, VBQ score and spinal QCT between the subsidence group and the no-subsidence group. The multivariable analysis demonstrated that only an increased VBQ score (OR = 2.690, 95% CI 1.312-5.515, p = 0.007) and decreased L1/2 QCT-vBMD (OR = 0.955, 95% CI 0.933-0.977, p < 0.001) were associated with an increased rate of cage subsidence. The VBQ score was found to be moderately correlated with the spinal QCT (r = -0.426, p < 0.001). The VBQ score was shown to significantly predict cage subsidence, with an accuracy of 82.5%.

CONCLUSION

Our findings indicate that the MRI-based VBQ score is a significant predictor of cage subsidence and could be used to assess BMD.

Advances in Hounsfield units value for predicting cage subsidence on spinal interbody fusion surgery

PURPOSE

A growing number of studies have demonstrated that Hounsfield units (HU) value can effectively assess bone quality and predict cage subsidence (CS) after spinal surgery. The purpose of this review is to provide an overview of the utility of the HU value for predicting CS after spinal surgery and to raise some of the unresolved questions in this field.

METHODS

We searched on PubMed, EMBASE, MEDLINE, and Cochrane Library for studies correlating HU value to CS.

RESULTS

Thirty-seven studies were included in this review. We found that HU value can predicted the risk of CS effectively after spinal surgery. Moreover, the HU value of the cancellous vertebral body and the cortical endplate were used for predicting CS, in comparison, the measurement method of HU value in the cancellous vertebral body was more standardized, but which region is more important to CS remains unknown. Different cutoff thresholds of HU value have been established in different surgical procedures for predicting CS. The HU value may be superior to dual-energy X-ray absorptiometry (DEXA) for CS prediction; however, the usage standard of HU value has not been well established.

CONCLUSIONS

The HU value shows great potential for predicting CS and constitutes an advantage over DEXA. However, general consensuses about how CS is defined and HU is measured, which part of HU value is more important, and the appropriate cutoff threshold of the HU value for osteoporosis and CS still require exploration.

The Role of Hounsfield Unit in Intraoperative Endplate Violation and Delayed Cage Subsidence with Oblique Lateral Interbody Fusion

STUDY DESIGN

Retrospective clinical case series.

OBJECTIVES

To investigate the risk factors for intraoperative endplate violations and delayed cage subsidence after oblique lateral interbody fusion (OLIF) surgery. Secondly, to examine whether low Hounsfield unit (HU) values at different regions of the endplate are associated with intraoperative endplate violation or delayed cage subsidence.

METHODS

61 patients (aged 65.1 ± 9.5 years; 107 segments) who underwent OLIF with or without posterior instrumentation from May 2015 to April 2019 were retrospectively studied. Intraoperative endplate violation was measured on sagittal reconstructed computerized tomography (CT) images immediate postoperatively, while delayed cage subsidence was evaluated using lateral radiographs and defined at 1-month follow-up or later. Demographic information and clinical parameters such as age, body mass index, bone mineral density, number of surgical levels, cage dimension, disc height restoration, visual analogue scale (VAS), and HU at different regions of the endplate were obtained.

RESULTS

Total postoperative cage subsidence was identified in 45 surgical levels (42.0%) in 26 patients (42.6%) up till postoperative 1-year follow-up. Low HU value at the ipsilateral epiphyseal ring was an independent risk factor for intraoperative endplate violation (P = .008) with a cut-off value of 326.21 HUs. Low HU values at the central endplate had a significant correlation with delayed cage subsidence in stand-alone cases (P = .013) with a cut-off value of 296.42 HUs. VAS scores were not different at 1 week postoperatively in cases with or without intraoperative endplate violation (3.12 ± .73 vs 2.89 ± .72, P = .166) and showed no difference at 1 year with or without delayed cage subsidence (1.95 ± .60 vs 2.26 ± .85, P = .173).

CONCLUSIONS

Intraoperative endplate violation and delayed cage subsidence are not uncommon with OLIF surgery. HUs of the endplate are good predictors for intraoperative endplate violation and cage subsidence since they can represent the regional bone quality of the endplate in contact with the implant. VAS improvements were not affected by intraoperative endplate violation or delayed cage subsidence at 1-year follow-up.

LEVEL OF EVIDENCE

Level III.

Predictors of Postoperative Segmental and Overall Lumbar Lordosis in Minimally Invasive Transforaminal Lumbar Interbody Fusion: A Consecutive Case Series

STUDY DESIGN

Retrospective Case-Series.

OBJECTIVES

Due to heterogeneity in previous studies, the effect of MI-TLIF on postoperative segmental lordosis (SL) and lumbar lordosis (LL) remains unclear. Therefore, we aim to identify radiographic factors associated with lordosis after surgery in a homogenous series of MI-TLIF patients.

METHODS

A single-center retrospective review identified consecutive patients who underwent single-level MI-TLIF for grade 1 degenerative spondylolisthesis from 2015-2020. All surgeries underwent unilateral facetectomies and a contralateral facet release with expandable interbody cages. PROs included the ODI and NRS-BP for low-back pain. Radiographic measures included SL, disc height, percent spondylolisthesis, cage positioning, LL, PI-LL mismatch, sacral-slope, and pelvic-tilt. Surgeries were considered "lordosing" if the change in postoperative SL was ≥ +4° and "kyphosing" if ≤ -4°. Predictors of change in SL/LL were evaluated using Pearson's correlation and multivariable regression.

RESULTS

A total of 73 patients with an average follow-up of 22.5 (range 12-61) months were included. Patients experienced significant improvements in ODI (29% ± 22% improvement, P < .001) and NRS-BP (3.3 ± 3 point improvement, P < .001). There was a significant increase in mean SL (Δ3.43° ± 4.37°, P < .001) while LL (Δ0.17° ± 6.98°, P > .05) remained stable. Thirty-eight (52%) patients experienced lordosing MI-TLIFs, compared to 4 (5%) kyphosing and 31 (43%) neutral MI-TLIFs. A lower preoperative SL and more anterior cage placement were associated with the greatest improvement in SL (β = -.45° P = .001, β = 15.06° P < .001, respectively).

CONCLUSIONS

In our series, the majority of patients experienced lordosing or neutral MI-TLIFs (n = 69, 95%). Preoperative radiographic alignment and anterior cage placement were significantly associated with target SL following MI-TLIF.

Risk Factors for Cage Subsidence in Minimally Invasive Lateral Corpectomy for Osteoporotic Vertebral Fractures

Introduction

This study aims to investigate risk factors for cage subsidence following minimally invasive lateral corpectomy for osteoporotic vertebral fractures.

Methods

Eight males and 13 females (77.2±6.0 years old) with osteoporotic vertebral fractures who underwent single corpectomy using a wide-footprint expandable cage with at least a 1-year follow-up were retrospectively included. The endplate cage (EC) angle was defined as the angle between the vertebral body's endplate and the cage's base on the cranial and caudal sides. A sagittal computed tomography scan was performed immediately after surgery and at the final follow-up, with cage subsidence defined as subsidence of ≥2 mm on the cranial or caudal side. Risk factors were analyzed by dividing cases into groups with (n=6) and without (n=15) cage subsidence.

Results

No significant differences were noted in age, bone mineral density, number of fixed vertebrae, sagittal parameters, preoperative and final kyphosis angle, amount of kyphosis angle correction, bone union, screw loosening, and number of other vertebral fractures preoperatively and 1-year postoperatively between the two groups. No difference was noted in cranial EC angle, but a significant difference was noted in caudal EC angle in the group with (10.7±4.1°) and without (4.7±4.2°) subsidence (P=0.008). Logistic regression analysis with the dependent variable as presence or absence of subsidence showed that caudal EC angle (>7.5°) was a significant factor (odds ratio: 20, 95% confidence interval: 1.655-241.7, P=0.018).

Conclusions

In minimally invasive lateral corpectomy for osteoporotic vertebral fractures, a cage tilted more than 7.5° to the caudal vertebral endplate is a risk factor for cage subsidence. The cage should be placed as perpendicular to the endplate as possible, especially to the caudal vertebral body, to avoid cage subsidence.

Interspinous-Interbody Fusion via a Strictly Lateral Surgical Approach: A Biomechanical Stabilization Comparison to Constructs Requiring Both Lateral and Posterior Approaches

Objective Lumbar fusion performed through lateral approaches is becoming more common. The interbody devices are generally supported by supplemental posterior fixation implanted through a posterior approach, potentially requiring a second incision and intraoperative repositioning of the patient. A minimally invasive lateral interspinous fixation device may eliminate the need for intraoperative repositioning and avoid disruption of the supraspinous ligament. The objective of this in vitrobiomechanical study was to investigate segmental multidirectional stability and maintenance of foraminal distraction of a lateral interspinous fixation device compared to commonly used pedicle screw and facet screw posterior fixation constructs when combined with lumbar interbody cages. Methods Six human cadaver lumbar spine specimens were subjected to nondestructive quasistatic loading in the following states: (1) intact; (2) interspinous fixation device alone and (3) with lateral interbody cage; (4) lateral lumbar interbody cage with bilateral pedicle screws; (5) lateral lumbar interbody cage with unilateral pedicle screws; and (6) lateral lumbar interbody cage with facet screws. Multidirectional pure bending in 1.5 Nm increments to 7.5 Nm, and 7.5 Nm flexion-extension bending with a 700 N compressive follower load were performed separately with optoelectronic segmental motion measurement. Relative angular motions of L2-L3, L3-L4, and L4-L5 functional spinal units were evaluated, and the mean instantaneous axis of rotation in the sagittal plane was calculated for the index level. Foraminal height was assessed during combined flexion-extension and compression loading for each test construct. Results All implant configurations significantly restricted flexion-extension motion compared with intact (p < 0.05). No significant differences were found in flexion-extension when comparing the different posterior implants combined with lateral lumbar interbody cages. All posterior fixation devices provided comparable neuroforaminal distraction and maintained distraction during flexion and extension. Conclusions When combinedwith lateral lumbar interbody cages, the minimally invasive lateral interspinous fixation device effectively stabilized the spine and maintained neuroforaminal distraction comparable to pedicle screw constructs or facet screws. These results suggest the lateral interspinous fixation device may provide a favorable alternative to other posterior systems that require patient repositioning during surgery and involve a greater disruption of native tissues.

Three-Dimensional-Printed Titanium Versus Polyetheretherketone Cages for Lumbar Interbody Fusion: A Systematic Review of Comparative In Vitro, Animal, and Human Studies

Interbody fusion is a workhorse technique in lumbar spine surgery that facilities indirect decompression, sagittal plane realignment, and successful bony fusion. The 2 most commonly employed cage materials are titanium (Ti) alloy and polyetheretherketone (PEEK). While Ti alloy implants have superior osteoinductive properties they more poorly match the biomechanical properties of cancellous bones. Newly developed 3-dimensional (3D)-printed porous titanium (3D-pTi) address this disadvantage and are proposed as a new standard for lumbar interbody fusion (LIF) devices. In the present study, the literature directly comparing 3D-pTi and PEEK interbody devices is systematically reviewed with a focus on fusion outcomes and subsidence rates reported in the in vitro, animal, and human literature. A systematic review directly comparing outcomes of PEEK and 3D-pTi interbody spinal cages was performed. PubMed, Embase, and Cochrane Library databases were searched according to PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines. Mean Newcastle-Ottawa Scale score for cohort studies was 6.4. A total of 7 eligible studies were included, comprising a combination of clinical series, ovine animal data, and in vitro biomechanical studies. There was a total population of 299 human and 59 ovine subjects, with 134 human (44.8%) and 38 (64.4%) ovine models implanted with 3D-pTi cages. Of the 7 studies, 6 reported overall outcomes in favor of 3D-pTi compared to PEEK, including subsidence and osseointegration, while 1 study reported neutral outcomes for device related revision and reoperation rate. Though limited data are available, the current literature supports 3D-pTi interbodies as offering superior fusion outcomes relative to PEEK interbodies for LIF without increasing subsidence or reoperation risk. Histologic evidence suggests 3D-Ti to have superior osteoinductive properties that may underlie these superior outcomes, but additional clinical investigation is merited.

Perioperative Clinical Features and Long-term Prognosis After Oblique Lateral Interbody Fusion (OLIF), OLIF With Anterolateral Screw Fixation, or OLIF With Percutaneous Pedicle Fixation: A Comprehensive Treatment Strategy for Patients With Lumbar Degenerative Disease

OBJECTIVE

To compare the efficacy of oblique lateral interbody fusion (OLIF), OLIF combined with anterolateral screw fixation (OLIF-AF), and OLIF combined with percutaneous pedicle screw fixation (OLIF-PF) in the treatment of single-level or 2-level degenerative lumbar disease.

METHODS

Between January 2017 and 2021, 71 patients were treated with OLIF and combined OLIF. The demographic data, clinical outcomes, radiographic outcomes, and complications were compared among the 3 groups.

RESULTS

The operative time and intraoperative blood loss in the OLIF (p<0.05) and OLIF-AF (p<0.05) groups were lower than in the OLIF-PF group. Posterior disk height improvement in the OLIF-PF group was better than in the OLIF (p<0.05) and OLIF-AF (p<0.05) groups. In terms of foraminal height (FH), the OLIF-PF group was significantly better than the OLIF group (p<0.05), but there was no significant difference between the OLIF-PF and OLIF-AF groups (p>0.05) or between the OLIF and OLIF-AF groups (p>0.05). There were no significant differences in fusion rates, the incidence of complications, lumbar lordosis, anterior disc height, and cross-sectional area among the 3 groups (p>0.05). The OLIF-PF group had significantly lower rates of subsidence than the OLIF group (p<0.05).

CONCLUSION

OLIF remains a viable option with similar patient-reported outcomes and fusion rates compared with surgeries that include lateral and posterior internal fixation while greatly reducing the financial burden, intraoperative time, and intraoperative blood loss. OLIF has a higher subsidence rate than lateral and posterior internal fixation, but most subsidence is mild and has no adverse effect on clinical and radiographic outcomes.

Biomechanical Evaluation of Lateral Lumbar Interbody Fusion with Various Fixation Options for Adjacent Segment Degeneration: A Finite Element Analysis

OBJECTIVE

Adjacent segment degeneration (ASD) is a common phenomenon after lumbar fusion. Lateral lumbar interbody fusion (LLIF) may provide an alternative treatment method for ASD. This study used finite element analysis to evaluate the biomechanical effects of LLIF with various fixation options and identify an optimal surgical strategy for ASD.

METHODS

A validated L1-S1 finite element model was modified for simulation. Six finite element models of the lumbar spine were created and were divided into group 1 (L4-5 posterior lumbar interbody fusion [PLIF] + L3-4 LLIF) and group 2 (L5-S1 PLIF + L4-5 LLIF). Each group consisted of 1) cage-alone, 2) cage + lateral screw fixation (LSF), and 3) cage + bilateral pedicle screw fixation (BPSF) models. The range of motion, intradiscal pressure, and facet loads of adjacent segments as well as interbody cage stress were analyzed.

RESULTS

The stress on the LLIF cage-superior endplate interface was highest in the cage-alone model followed by the cage + LSF model and cage + BPSF model. The increase in range of motion, intradiscal pressure, and facet loads at the adjacent segment was highest in the cage + BPSF model followed by the cage + LSF model and cage-alone model. However, the biomechanical effect on the adjacent segment seemed similar in the cage-alone and cage + LSF models.

CONCLUSIONS

LLIF with BPSF is recommended when performing LLIF surgery for ASD after L4-5 and L5-S1 PLIF. Considering cage subsidence and biomechanical effects on the adjacent segment, LLIF with LSF may be a suboptimal option for ASD surgery.

Changes in psoas and posterior paraspinal muscle morphology after standalone lateral lumbar interbody fusion: a quantitative MRI-based analysis

PURPOSE

Standalone lateral lumbar interbody fusion (SA-LLIF) without posterior instrumentation can be an alternative to 360° fusion in selected cases. This study aimed to investigate quantitative changes in psoas and paraspinal muscle morphology that occur on index levels after SA-LLIF.

METHODS

Patients undergoing single- or multi-level SA-LLIF at L2/3 to L4/5 who had preoperative and postoperative lumbar MRI scans, the latter performed between 3 and 18 months after surgery for any reason, were retrospectively included. Muscle measurements were performed of the psoas and posterior paraspinal muscles (PPM; erector spinae and multifidus) on index levels using manual segmentation and an automated pixel intensity threshold method to differentiate muscle from fat signal. Changes in the total cross-sectional area (TCSA), the functional cross-sectional area (FCSA), and the percentage of fat infiltration (FI) of these muscles were assessed.

RESULTS

A total of 67 patients (55.2% female, age 64.3 ± 10.6 years, BMI 26.9 ± 5.0 kg/m2) with 125 operated levels were included. Follow-up MRI scans were performed after an average of 8.7 ± 4.6 months, primarily for low back pain. Psoas muscle parameters did not change significantly, irrespective of the approach side. Among PPM parameters, the mean TCSA at L4/5 (+ 4.8 ± 12.4%; p = 0.013), and mean FI at L3/4 (+ 3.1 ± 6.5%; p = 0.002) and L4/5 (+ 3.0 ± 7.0%; p = 0.002) significantly increased.

CONCLUSION

Our study demonstrated that SA-LLIF did not alter psoas muscle morphology, underlining its minimally invasive nature. However, FI of PPM significantly increased over time despite the lack of direct tissue damage to posterior structures, suggesting a pain-mediated response and/or the result of segmental immobilization.

Cage subsidence-A multifactorial matter!

STUDY DESIGN

Retrospective cohort study OBJECTIVE: Wider cages are associated with improved decompression and reduced subsidence, but variation in cage physical properties limits consistent outcome analysis after thoracolumbar interbody fusion. This study investigated cage subsidence and its relationship to lateral and posterior approaches with a focus on the hypothesis that the larger surface area of lateral cages results in lower subsidence rates.

METHODS

This study retrospectively reviewed 194 patients who underwent interbody fusion between 2016 and 2019 with a primary outcome of cage subsidence. Secondary outcomes were cage distribution (patients, approaches, expandability), cage dimensions, t‑scores, length of hospital stay, blood loss, surgical time, and pelvic incidence-lumbar lordosis (PI-LL) mismatch.

RESULTS

Medical records were reviewed for 194 patients receiving 387 cages at 379 disc levels. Subsidence was identified in 35.1% of lateral cages, 40.9% of posterior cages, and 36.3% of all cages. Lower surface area (p = 0.008) and cage expandability were associated with subsidence risk. Lower anteroposterior cage length proved to be a significant factor in the subsidence of posteriorly placed cages (p = 0.007). Osteopenic and osteoporotic patients experienced cage subsidence 36.8% of the time compared to 3.5% of patients with normal t‑scores (p = 0.001). Cage subsidence correlated with postoperative deterioration of the PI-LL mismatch (p = 0.03). Patients receiving fusion augmentation with bone morphogenic protein experienced higher fusion rates (p < 0.01).

CONCLUSION

Cage subsidence is a common complication that can significantly impact operative outcomes following thoracolumbar interbody fusion. Low t‑scores, smaller surface area, cage expandability, and lower cage length in posterior approaches contribute significantly to cage subsidence.