Biosensors and their applications - A review

Immobilized Enzymes in Biosensor Applications

Enzyme-based biosensing devices have been extensively developed over the last few decades, and have proven to be innovative techniques in the qualitative and quantitative analysis of a variety of target substrates over a wide range of applications. Distinct advantages that enzyme-based biosensors provide, such as high sensitivity and specificity, portability, cost-effectiveness, and the possibilities for miniaturization and point-of-care diagnostic testing make them more and more attractive for research focused on clinical analysis, food safety control, or disease monitoring purposes. Therefore, this review article investigates the operating principle of enzymatic biosensors utilizing electrochemical, optical, thermistor, and piezoelectric measurement techniques and their applications in the literature, as well as approaches in improving the use of enzymes for biosensors.

Two-Dimensional Antifouling Fluidic Channels on Nanopapers for Biosensing

Two-dimensional (hydrophilic) channels were patterned on films prepared from cellulose nanofibrils (CNF) using photolithography and inkjet printing. Such processes included UV-activated thiol-yne click coupling and inkjet-printed designs with polystyrene. The microfluidic channels were characterized (SEM, wetting, and fluid flow) and applied as platforms for biosensing. Compared to results from the click method, a better feature fidelity and flow properties were achieved with the simpler inkjet-printed channels. Human immunoglobulin G (hIgG) was used as target protein after surface modification with either bovine serum albumin (BSA), fibrinogen, or block copolymers of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) and poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) (PDMAEMA- block-POEGMA copolymers). Surface plasmon resonance (SPR) and AFM imaging were used to determine their antifouling effect to prevent nonspecific hIgG binding. Confocal laser scanning microscopy revealed diffusion and adsorption traces in the channels. The results confirm an effective surface passivation of the microfluidic channels (95% reduction of hIgG adsorption and binding). The inexpensive and disposable systems proposed here allow designs with space-resolved blocking efficiency that offer a great potential in biosensing.

Polymer brush interfaces for protein biosensing prepared by surface-initiated controlled radical polymerization

This article discusses protein-binding polymer brushes and the various strategies that can be used to immobilize proteins on these films.

Determining meat freshness using electrochemistry: Are we ready for the fast and furious?

Electrochemistry is providing a variety of sensors at an extremely rapid pace. Many of these sensors offer powerful attributes like a multitude of platforms like voltammetry, impedimetry, amperometry and conductometry, as well as sensor-related gains like high sensitivity, selectivity and low cost. It is natural that their applications to food, especially meat freshness determination, are also increasing. Novel methods for rapidly assessing meat freshness are vital for meeting the increasing worldwide demand for meat products. Therefore, we present a short and succinct review of the most promising electrochemical sensor types, including those based on conductive polymers, nanocomposites and metal nanoparticles. From the wide range of sensors that have been designed to detect microbial pathogens and chemical degradation, we have covered a basic snapshot to yield an impression of recent gains in the research genre of meat freshness.

Exploring the potential of electroless and electroplated noble metal-semiconductor hybrids within bio- and environmental sensing

Over the last two decades, the rapid development and widespread application of nanomaterials has significantly influenced research in various fields, including analytical chemistry and biosensing technologies. In particular, the simple functionalization and tuning of noble metal nanoparticle (NP) surface chemistry resulted in the development of a series of novel biosensing platforms with quick read-out and enhanced capabilities towards specific analyte detection. Moreover, noble metal NPs possess a number of unique properties, viz. high surface-to-volume ratio and excellent spectral, optical, thermal, electrical and catalytic characteristics. This manuscript provides an elaborate review on galvanic noble metal NPs deposited onto semiconductor surfaces, from the preparation stage towards their application in biosensors and gas sensing. Two types of deposition approaches, viz. galvanic displacement/electroless and conventional electroplating, are introduced and compared. Furthermore, the analytical merit of hybrid nanomaterials towards the improvement of sensing abilities is highlighted. Finally, some limitations and challenges related to progress in the development and application of analytical devices based on electroless and electroplated noble metal NPs-semiconductor hybrids (NMNPsHs) in biochemical and environmental sensing are discussed.

Quantifying phenotypes in single cells using droplet microfluidics

This book chapter describes the use of droplet microfluidics to phenotype single cells. The basic process flow includes the encapsulation of single cells with a specific probe into aqueous micro-droplets suspended in a biocompatible oil. The probe is chosen to measure the phenotype of interest. After incubation, the encapsulated cell turns the probe fluorescent and renders the entire droplet fluorescent. Enumerating drops that are fluorescent quantifies the concentration of cells possessing the phenotype of interest. Examining the distribution of fluorescence further allows one to quantify the heterogeneity among the cell population.

Application of eukaryotic and prokaryotic laccases in biosensor and biofuel cells: recent advances and electrochemical aspects

Laccases exhibit a wide range of applications, especially in the electrochemical field, where they are regarded as a potential biotic component. Laccase-based biosensors have immense practical applications in the food, environmental, and medical fields. The application of laccases as biocathodes in enzymatic biofuel cells has promising potential in the preparation of implantable equipment. Extensive studies have been directed towards the potential role of fungal laccases as biotic components of electrochemical equipment. In contrast, the potential of prokaryotic laccases in electrochemistry has been not fully understood. However, there has been recent and rapid progress in the discovery and characterization of new types of prokaryotic laccases. In this review, we have comprehensively discussed the application of different sources of laccases as a biocatalytic component in various fields of application. Further, we described the potential of different types of laccases in bioelectrochemical applications.

High-Precision Control of Plasma Drug Levels Using Feedback-Controlled Dosing

By, in effect, rendering pharmacokinetics an experimentally adjustable parameter, the ability to perform feedback-controlled dosing informed by high-frequency in vivo drug measurements would prove a powerful tool for both pharmacological research and clinical practice. Efforts to this end, however, have historically been thwarted by an inability to measure in vivo drug levels in real time and with sufficient convenience and temporal resolution. In response, we describe a closed-loop, feedback-controlled delivery system that uses drug level measurements provided by an in vivo electrochemical aptamer-based (E-AB) sensor to adjust dosing rates every 7 s. The resulting system supports the maintenance of either constant or predefined time-varying plasma drug concentration profiles in live rats over many hours. For researchers, the resultant high-precision control over drug plasma concentrations provides an unprecedented opportunity to (1) map the relationships between pharmacokinetics and clinical outcomes, (2) eliminate inter- and intrasubject metabolic variation as a confounding experimental variable, (3) accurately simulate human pharmacokinetics in animal models, and (4) measure minute-to-minute changes in a drug's pharmacokinetic behavior in response to changing health status, diet, drug-drug interactions, or other intrinsic and external factors. In the clinic, feedback-controlled drug delivery would improve our ability to accurately maintain therapeutic drug levels in the face of large, often unpredictable intra- and interpatient metabolic variation. This, in turn, would improve the efficacy and safety of therapeutic intervention, particularly for the most gravely ill patients, for whom metabolic variability is highest and the margin for therapeutic error is smallest.

From the Field to the Bottle—An Integrated Strategy for Wine Authenticity

The wine sector is one of the most economically important agro-food businesses. The wine market value is largely associated to terroir, in some cases resulting in highly expensive wines that attract fraudulent practices. The existent wine traceability system has some limitations that can be overcome with the development of new technological approaches that can tackle this problem with several means. This review aims to call attention to the problem and to present several strategies that can assure a more reliable and authentic wine system, identifying existent technologies developed for the sector, which can be incorporated into the current traceability system.

Optimized sensing of sparse and small targets using lens-free holographic microscopy

Lens-free holographic microscopy offers sub-micron resolution over an ultra-large field-of-view >20 mm², making it suitable for bio-sensing applications that require the detection of small targets at low concentrations. Various pixel super-resolution techniques have been shown to enhance resolution and boost signal-to-noise ratio (SNR) by combining multiple partially-redundant low-resolution frames. However, it has been unclear which technique performs best for small-target sensing. Here, we quantitatively compare SNR and resolution in experiments using no regularization, cardinal-neighbor regularization, and a novel implementation of sparsity-promoting regularization that uses analytically-calculated gradients from Bayer-pattern image sensors. We find that sparsity-promoting regularization enhances the SNR by ~8 dB compared to the other methods when imaging micron-scale beads with surface coverages up to ~4%.

On the electrical conductivity of alginate hydrogels

Hydrogels have been extensively used in the field of biomedical applications, offering customizable natural, synthetic or hybrid materials, particularly relevant in the field of tissue engineering. In the bioelectronics discipline, hydrogels are promising mainly as sensing platforms with or without encapsulated cells, showing great potential in healthcare and medicine. However, to date there is little data in the literature which characterizes the electrical properties of tissue engineering materials which are relevant to bioelectronics. In this work, we present electrical characterization of alginate hydrogels, a natural polysaccharide, using a four-probe method similar to electrical impedance spectroscopy. The acquired conductance data show distinct frequency-dependent features that change as a function of alginate and crosslinker concentration reflecting ion kinetics inside the measured sample. Furthermore, the presence of NIH 3T3 fibroblasts encapsulated in the hydrogels matrix was found to alter the artificial tissue's electrical properties. The method used provides valuable insight to the frequency-dependent electrical response of the resulting systems. It is hoped that the outcome of this research will be of use in the development of cell/electronic interfaces, possibly toward diagnostic biosensors and therapeutic bioelectronics.

Bioassays: The best alternative for conventional methods in detection of Legionella pneumophila

Fastidious bacteria are group of bacteria that not only grow slowly but also have complex nutritional needs. In this review, recent progress made on development of biosensing strategies towards quantification of Legionella pneumophila as fastidious bacteria in microbiology was investigated. In coincidence with medical bacteriology, it is the most widely used bio-monitoring, biosensors based on DNA and antibody. Also, all of legionella pneumophila genosensors and immunosensors that developed in recent years were collected analyzed. This review is meant to provide an overview of the various types of bioassays have been developed for determination of Legionella Legionella, along with significant advances over the last several years in related technologies. In addition, this review described: i) Most frequently applied principles in bioassay/biosensing of Legionellaii) The aspects of fabrication in the perspective of bioassay/biosensing applications iii) The potential of various electrochemical and optical bioassay/biosensing for the determination of Legionella and the circumvention of the most serious problem in immunosensing/immunoassay was discussed. iv) Some of bioassay/biosensing has been discussed with and without labels. v) We also summarize the latest developments in the applications of bioassay/biosensing methods for detection of Legionella. vi) The development trends of optical and electrochemical based bioassay/biosensing are also introduced.

Novel label-free electrochemical aptasensor for determination of Diazinon using gold nanoparticles-modified screen-printed gold electrode

The present study aimed to develop a highly sensitive label-free electrochemical aptasensor for the detection of Diazinon (DZN), as one of the most widespread organophosphorus compounds. The aptasensor was assembled using screen-printed gold electrode modified by thiolated aptamers which were immobilized on gold nanoparticles (Au NPs). Optimum deposition time, in which the highest electrochemical response occurred, was found in 150 s. Electrochemical impedance spectroscopy and cyclic voltammetry were used to characterize electrochemical properties of the novel aptasensor. Electrochemical detection was carried out through differential pulse voltammetry in [Fe(CN)₆]^3-/4- solution. Fluctuation of the current was examined in the DZN concentration range of 0.1-1000 nM. According to the results, the designed aptasensor provided an extremely lower limit of detection (0.0169 nM) compared with HPLC and other colorimetric techniques for DZN detection. The present highly specific designed aptasensor doesn't interact with other analytes in the real sample. Consequently, the present aptasensor is easy to use and relatively inexpensive with a good sensitivity, stability, and reproducibility for this application. We are now evaluating all approaches to make a portable device for fast and sensitive quantification of DZN and related OPs.

Lectin-based biosensors as analytical tools for clinical oncology

The review focus on the use of lectin-based biosensors in the oncology field, and ponders the potentialities of using these devices as analytical tools to monitor the levels of cancer glycobiomarkers in biological fluids, helping in the diagnosis, prognosis and treatment assessment. Several examples of lectin-based biosensors directed for cancer biomarkers are described and discussed, and their potential application in the clinic is considered, taking into account their analytical features, advantages and performance in sample analysis. Technical and practical aspects in the construction process, which are specific for lectin biosensors, are debated, as well as the requirements in sample collection and processing, and biosensor validation. Today's challenges for real implementation of these devices in the clinic are presented, along with the future trends in the field.

Organic Bioelectronics: Materials and Biocompatibility

Organic electronic materials have been considered for a wide-range of technological applications. More recently these organic (semi)conductors (encompassing both conducting and semi-conducting organic electronic materials) have received increasing attention as materials for bioelectronic applications. Biological tissues typically comprise soft, elastic, carbon-based macromolecules and polymers, and communication in these biological systems is usually mediated via mixed electronic and ionic conduction. In contrast to hard inorganic semiconductors, whose primary charge carriers are electrons and holes, organic (semi)conductors uniquely match the mechanical and conduction properties of biotic tissue. Here, we review the biocompatibility of organic electronic materials and their implementation in bioelectronic applications.

Implantable biosensors and their contribution to the future of precision medicine

Precision medicine can be defined as the prevention, investigation and treatment of diseases taking individual variability into account. There are multiple ways in which the field of precision medicine may be advanced; however, recent innovations in the fields of electronics and microfabrication techniques have led to an increased interest in the use of implantable biosensors in precision medicine. Implantable biosensors are an important class of biosensors because of their ability to provide continuous data on the levels of a target analyte; this enables trends and changes in analyte levels over time to be monitored without any need for intervention from either the patient or clinician. As such, implantable biosensors have great potential in the diagnosis, monitoring, management and treatment of a variety of disease conditions. In this review, we describe precision medicine and the role implantable biosensors may have in this field, along with challenges in their clinical implementation due to the host immune responses they elicit within the body.

Blueprints for Biosensors: Design, Limitations, and Applications

Biosensors are enabling major advances in the field of analytics that are both facilitating and being facilitated by advances in synthetic biology. The ability of biosensors to rapidly and specifically detect a wide range of molecules makes them highly relevant to a range of industrial, medical, ecological, and scientific applications. Approaches to biosensor design are as diverse as their applications, with major biosensor classes including nucleic acids, proteins, and transcription factors. Each of these biosensor types has advantages and limitations based on the intended application, and the parameters that are required for optimal performance. Specifically, the choice of biosensor design must consider factors such as the ligand specificity, sensitivity, dynamic range, functional range, mode of output, time of activation, ease of use, and ease of engineering. This review discusses the rationale for designing the major classes of biosensor in the context of their limitations and assesses their suitability to different areas of biotechnological application.

Thiol-Capped Gold Nanoparticle Biosensors for Rapid and Sensitive Visual Colorimetric Detection of Klebsiella pneumoniae

In the last few years, gold nanoparticle biosensors have been developed for rapid, precise, easy and inexpensive with high specificity and sensitivity detection of human, plant and animal pathogens. Klebsiella pneumoniae serotype K2 is one of the common gram-negative pathogens with high prevalence. Therefore, it is essential to provide the effective and exclusive method to detect the bacteria. Klebsiella pneumoniae serotype K2 strain ATCC9997 genomic DNA was applied to establish the detection protocol either with thiol-capped oligonucleotide probes and gold nanoparticles or polymerase chain reaction based on K2A gene sequence. In the presence of the genomic DNA and oligonucleotide probes, a change in the color of gold nanoparticles and maximum changes in wavelength at 550-650 nm was achieved. In addition, the result showed specificity of 15 × 10⁵ CFU/mL and 9 pg/μL by gold nanoparticles probes. The lower limit of detection obtained by PCR method was 1 pg/μL. Moreover, results demonstrated a great specificity of the designed primers and probes for colorimetric detection assay and PCR. Colorimetric detection using gold nanoparticle probe with advantages such as the lower time required for detection and no need for expensive detection instrumentation compared to the biochemical and molecular methods could be introduced for rapid, accurate detection of the bacteria.

Recent Developments in Enzyme, DNA and Immuno-Based Biosensors

Novel sensitive, rapid and economical biosensors are being developed in a wide range of medical environmental and food applications. In this paper, we review some of the main advances in the field over the past few years by discussing recent studies from literature. A biosensor, which is defined as an analytical device consisting of a biomolecule, a transducer and an output system, can be categorized according to the type of the incorporated biomolecule. The biomolecules can be enzymes, antibodies, ssDNA, organelles, cells etc. The main biosensor categories classified according to the biomolecules are enzymatic biosensors, immunosensors and DNA-based biosensors. These sensors can measure analytes produced or reduced during reactions at lower costs compared to the conventional detection techniques. Numerous types of biosensor studies conducted over the last decade have been explored here to reveal their key applications in medical, environmental and food industries which provide comprehensive perspective to the readers. Overviews of the working principles and applications of the reviewed sensors are also summarized.

Flexible nanopillar-based electrochemical sensors for genetic detection of foodborne pathogens

Flexible and highly ordered nanopillar arrayed electrodes have brought great interest for many electrochemical applications, especially to the biosensors, because of its unique mechanical and topological properties. Herein, we report an advanced method to fabricate highly ordered nanopillar electrodes produced by soft-/photo-lithography and metal evaporation. The highly ordered nanopillar array exhibited the superior electrochemical and mechanical properties in regard with the wide space to response with electrolytes, enabling the sensitive analysis. As-prepared gold and silver electrodes on nanopillar arrays exhibit great and stable electrochemical performance to detect the amplified gene from foodborne pathogen of Escherichia coli O157:H7. Additionally, lightweight, flexible, and USB-connectable nanopillar-based electrochemical sensor platform improves the connectivity, portability, and sensitivity. Moreover, we successfully confirm the performance of genetic analysis using real food, specially designed intercalator, and amplified gene from foodborne pathogens with high reproducibility (6% standard deviation) and sensitivity (10 × 1.01 CFU) within 25 s based on the square wave voltammetry principle. This study confirmed excellent mechanical and chemical characteristics of nanopillar electrodes have a great and considerable electrochemical activity to apply as genetic biosensor platform in the fields of point-of-care testing (POCT).

Electrochemical Enzyme Biosensors Revisited: Old Solutions for New Problems

Worldwide legislation is driving the development of novel and highly efficient analytical tools for assessing the composition of every material that interacts with Consumers or Nature. The biosensor technology is one of the most active R&D domains of Analytical Sciences focused on the challenge of taking analytical chemistry to the field. Electrochemical biosensors based on redox enzymes, in particular, are highly appealing due to their usual quick response, high selectivity and sensitivity, low cost and portable dimensions. This review paper aims to provide an overview of the most important advances made in the field since the proposal of the first biosensor, the well-known hand-held glucose meter. The first section addresses the current needs and challenges for novel analytical tools, followed by a brief description of the different components and configurations of biosensing devices, and the fundamentals of enzyme kinetics and amperometry. The following sections emphasize on enzyme-based amperometric biosensors and the different stages of their development.

Recent advances in synthetic biology of cyanobacteria

Cyanobacteria are attractive hosts that can be engineered for the photosynthetic production of fuels, fine chemicals, and proteins from CO₂. Moreover, the responsiveness of these photoautotrophs towards different environmental signals, such as light, CO₂, diurnal cycle, and metals make them potential hosts for the development of biosensors. However, engineering these hosts proves to be a challenging and lengthy process. Synthetic biology can make the process of biological engineering more predictable through the use of standardized biological parts that are well characterized and tools to assemble them. While significant progress has been made with model heterotrophic organisms, many of the parts and tools are not portable in cyanobacteria. Therefore, efforts are underway to develop and characterize parts derived from cyanobacteria. In this review, we discuss the reported parts and tools with the objective to develop cyanobacteria as cell factories or biosensors. We also discuss the issues related to characterization, tunability, portability, and the need to develop enabling technologies to engineer this "green" chassis.

New routes to the functionalization patterning and manufacture of graphene-based materials for biomedical applications

Graphene-based materials are being widely explored for a range of biomedical applications, from targeted drug delivery to biosensing, bioimaging and use for antibacterial treatments, to name but a few. In many such applications, it is not graphene itself that is used as the active agent, but one of its chemically functionalized forms. The type of chemical species used for functionalization will play a key role in determining the utility of any graphene-based device in any particular biomedical application, because this determines to a large part its physical, chemical, electrical and optical interactions. However, other factors will also be important in determining the eventual uptake of graphene-based biomedical technologies, in particular the ease and cost of manufacture of proposed device and system designs. In this work, we describe three novel routes for the chemical functionalization of graphene using oxygen, iron chloride and fluorine. We also introduce novel in situ methods for controlling and patterning such functionalization on the micro- and nanoscales. Our approaches are readily transferable to large-scale manufacturing, potentially paving the way for the eventual cost-effective production of functionalized graphene-based materials, devices and systems for a range of important biomedical applications.

Quartz Crystal Microbalance as Cell-Based Biosensor to Detect and Study Cytoskeletal Alterations and Dynamics

Several techniques can be used to monitor cell dynamism after a perturbation. Among these, Quartz Crystal Microbalance with Dissipation Monitoring (QCM-D) offers the great advantage to study the mechanical properties of cells in real-time and with a great sensitivity. Here, we used QCM-D to investigate the effects of two cytoskeleton-targeting agents, cytochalasin D (CytoD) and Y27632, on human MCF-7 cells. Cell adhesion on the sensor surface, crucial for in-flow experiments, was obtained by covalent adsorption of a fibronectin (FN) film, an extracellular matrix (ECM) protein. Direct analysis of MCF-7 cells on FN-coated sensor, shows a specific cellular response that was revealed and quantified by QCM-D after drugs exposure. Notably, upon treatment with Y27632, we observed a two-regime dissipation behavior that we associated with specific modifications of actin filaments and signaling proteins providing a link between biophysical and molecular mechanisms. Overall, this approach opens new opportunities for studying cellular response to mechanical cues in different biological conditions.

S-Layer Protein-Based Biosensors

The present paper highlights the application of bacterial surface (S-) layer proteins as versatile components for the fabrication of biosensors. One technologically relevant feature of S-layer proteins is their ability to self-assemble on many surfaces and interfaces to form a crystalline two-dimensional (2D) protein lattice. The S-layer lattice on the surface of a biosensor becomes part of the interface architecture linking the bioreceptor to the transducer interface, which may cause signal amplification. The S-layer lattice as ultrathin, highly porous structure with functional groups in a well-defined special distribution and orientation and an overall anti-fouling characteristics can significantly raise the limit in terms of variety and the ease of bioreceptor immobilization, compactness of bioreceptor molecule arrangement, sensitivity, specificity, and detection limit for many types of biosensors. The present paper discusses and summarizes examples for the successful implementation of S-layer lattices on biosensor surfaces in order to give a comprehensive overview on the application potential of these bioinspired S-layer protein-based biosensors.

Potential Utility of Metal-Organic Framework-Based Platform for Sensing Pesticides

The progress in modern agricultural practices could not have been realized without the large-scale contribution of assorted pesticides (e.g., organophosphates and nonorganophosphates). Precise tracking of these chemicals has become very important for safeguarding the environment and food resources owing to their very high toxicity. Hence, the development of sensitive and convenient sensors for the on-site detection of pesticides is imperative to overcome practical limitations encountered in conventional methodologies, which require skilled manpower at the expense of high cost and low portability. In this regard, the role of novel, advanced functional materials such as metal-organic frameworks (MOFs) has drawn great interest as an alternative for conventional sensory systems because of their numerous advantages over other nanomaterials. This review was organized to address the recent advances in applications of MOFs for sensing various pesticides because of their tailorable optical and electrical characteristics. It also provides in-depth comparison of the performance of MOFs with other nanomaterial sensing platforms. Further, we discuss the present challenges (e.g., potential bias due to instability under certain conditions, variations in the diffusion rate of the pesticide, chemical interferences, and the precise measurement of luminesce quenching) in developing robust and sensitive sensors by using tailored porosity, functionalities, and better framework stability.

Noble metal nanostructures in optical biosensors: Basics, and their introduction to anti-doping detection

Nanotechnology has illustrated significant potentials in biomolecular-sensing applications; particularly its introduction to anti-doping detection is of great importance. Illicit recreational drugs, substances that can be potentially abused, and drugs with dosage limitations according to the prohibited lists announced by the World Antidoping Agency (WADA) are becoming of increasing interest to forensic chemists. In this review, the theoretical principles of optical biosensors based on noble metal nanoparticles, and the transduction mechanism of commonly-applied plasmonic biosensors are covered. We review different classes of recently-developed plasmonic biosensors for analytic determination and quantification of illicit drugs in anti-doping applications. The important classes of illicit drugs include anabolic steroids, opioids, stimulants, and peptide hormones. The main emphasis is on the advantages that noble metal nano-particles bring to optical biosensors for signal enhancement and the development of highly sensitive (label-free) biosensors. In the near future, such optical biosensors may be an invaluable substitute for conventional anti-doping detection methods such as chromatography-based approaches, and may even be commercialized for routine anti-doping tests.

Amyloid Beta Detection by Faradaic Electrochemical Impedance Spectroscopy Using Interdigitated Microelectrodes

Faradaic electrochemical impedance spectroscopy (f-EIS) in the presence of redox reagent, e.g., [Fe(CN)₆]3-/4-, is widely used in biosensors owing to its high sensitivity. However, in sensors detecting amyloid beta (Aβ), the redox reagent can cause the aggregation of Aβ, which is a disturbance factor in accurate detection. Here, we propose an interdigitated microelectrode (IME) based f-EIS technique that can alleviate the aggregation of Aβ and achieve high sensitivity by buffer control. The proposed method was verified by analyzing three different EIS-based sensors: non-faradaic EIS (nf-EIS), f-EIS, and the proposed f-EIS with buffer control. We analyzed the equivalent circuits of nf-EIS and f-EIS sensors. The dominant factors of sensitivity were analyzed, and the impedance change rates via Aβ reaction was compared. We measured the sensitivity of the IME sensors based on nf-EIS, f-EIS, and the proposed f-EIS. The results demonstrate that the proposed EIS-based IME sensor can detect Aβ with a sensitivity of 7.40-fold and 10.93-fold higher than the nf-EIS and the f-EIS sensors, respectively.

Progress in utilisation of graphene for electrochemical biosensors

This review discusses recent graphene (GR) electrochemical biosensor for accurate detection of biomolecules, including glucose, hydrogen peroxide, dopamine, ascorbic acid, uric acid, nicotinamide adenine dinucleotide, DNA, metals and immunosensor through effective immobilization of enzymes, including glucose oxidase, horseradish peroxidase, and haemoglobin. GR-based biosensors exhibited remarkable performance with high sensitivities, wide linear detection ranges, low detection limits, and long-term stabilities. Future challenges for the field include miniaturising biosensors and simplifying mass production are discussed.

Chemical Vapor Deposition of Azidoalkylsilane Monolayer Films

N₃-functionalized monolayers on silicon wafer substrates are prepared via the controlled vapor-phase deposition of 11-azidoundecyltrimethoxysilanes at reduced pressure and elevated temperature. The quality of the layer is assessed using contact angle, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and ellipsometry measurements. At 60 °C, longer deposition times are needed to achieve monolayers with similar N₃ density compared to depositions at 145 °C. The monolayers formed via the vapor phase are denser compared to those formed via a solvent-based deposition process. ATR-FTIR measurements confirm the incorporation of azido-alkyl chains in the monolayer and the formation of siloxane bridges with the underlying oxide at both deposition temperatures. X-ray photon spectroscopy shows that the N₃ group is oriented upward in the grafted layer. Finally, the density was determined using total reflection X-ray fluorescence after a click reaction with chlorohexyne and amounts to 2.5 × 10¹⁴ N₃ groups/cm². In summary, our results demonstrate the formation of a uniform and reproducible N₃-containing monolayer on silicon wafers, hereby providing a functional coating that enables click reactions at the substrate.

Pilot study on an innovative biosensor with a range of medical and surgical applications

Objectives

The objective of this article is to briefly outline the utilization of biosensors in medicine and surgery and present diagnostic efficacy of thermal product (TP) based biosensor.

Results

The working principle of biosensor is based on measuring TP of a material in contact with the sensor. When an electrical square wave pulse of certain amplitude and duration is passed through TP based biosensor, the generated heat from its higher resistance will be dissipated and recorded by the sensor. As the surrounding material composition changes, the dissipated heat split between the sensor substrate and surrounding material changes which can be correlated to the change in TP of the material. For biological tissues, it is known that the thermal properties of tissues are quite different for different layers in the body and hence the heat absorbed will be different. The experiments were conducted on biological and non-biological tissues. For data acquisition software LabView 2014 (64-bit) was used and software used for post-processing was MATLAB R2015a (64-bit). The resulting graphs of TP from various materials (oil, water, saline, acetone) and biological tissue (porcine belly, porcine thigh layers and porcine abdominal viscera) expressed prominent deflections indicating diagnostic efficacy of TP based biosensor.

Electronic supplementary material

The online version of this article (10.1186/s13104-018-3163-6) contains supplementary material, which is available to authorized users.

Nanotechnology-based recent approaches for sensing and remediation of pesticides

Pesticides are meant to control and destroy the pests and weeds. They are classified into different categories on the basis their origin and type of pest they target. Chemical pesticides such as insecticides, herbicides and fungicides are commonly used in agricultural fields. However, the excessive use of these agrochemicals have adverse effects on environment such as reduced population of insect pollinators, threat to endangered species and habitat of birds. Upon consumption; chemical pesticides also cause various health issues such as skin, eye and nervous system related problems and cancer upon prolonged exposure. Various techniques in the past have been developed on the basis of surface adsorption, membrane filtration and biological degradation to reduce the content of pesticides. However, slow response, less specificity and sensitivity are some of the drawbacks of such techniques. In recent times, Nanotechnology has emerged as a helping tool for the sensing and remediation of pesticides. This review focuses on the use of this technology for the detection, degradation and removal of pesticides. Nanomaterials have been classified into nanoparticles, nanotubes and nanocomposites that are commonly used for detection, degradation and removal of pesticides. The review also focuses on the chemistry behind the sensing and remediation of pesticides using nanomaterials. Different types of nanoparticles, viz. metal nanoparticles, bimetallic nanoparticles and metal oxide nanoparticles; nanotubes such as carbon nanotubes and halloysite nanotubes have been used for the detection, degradation and removal of pesticides. Further, various enzyme-based biosensors for detection of pesticides have also been summarized.

Lipase, Phospholipase, and Esterase Biosensors (Review)

A biosensor is a device composed by a biological recognition element and a transducer that delivers selective information about a specific analyte. Technological and scientific advances in the area of biology, bioengineering, catalysts, electrochemistry, nanomaterials, microelectronics, and microfluidics have improved the design and performance of better biosensors. Enzymatic biosensors based on lipases, esterases, and phospholipases are valuable analytical apparatus which have been applied in food industry, oleochemical industry, biodegradable polymers, environmental science, and overall the medical area as diagnostic tools to detect cholesterol and triglyceride levels in blood samples. This chapter reviews recent developments and applications of lipase-, esterase-, and phospholipase-based biosensors.