On the analysis of protein self-association by sedimentation velocity analytical ultracentrifugation

Programmed death-1 ligand 1 interacts specifically with the B7-1 costimulatory molecule to inhibit T cell responses

Pathways in the B7:CD28 family of costimulatory molecules regulate T cell activation and tolerance. B7-dependent responses in Cd28(-/-)Ctla4(-/-) T cells together with reports of stimulatory and inhibitory functions for Programmed Death-1 Ligand 1 or 2 molecules (PD-L1 or PD-L2) have suggested additional receptors for these B7 family members. We show that B7-1 and PD-L1 interacted with affinity intermediate to that of B7-1:CD28 and B7-1:CTLA-4. The PD-L1:B7-1 interface overlapped with the B7-1:CTLA-4 and PD-L1:PD-1 (Programmed Death-1) interfaces. T cell activation and cytokine production were inhibited by the interaction of B7-1 with PD-L1. The responses of PD-1-deficient versus PD-1,B7-1 double-deficient T cells to PD-L1 and of CD28,CTLA-4 double-deficient versus CD28,CTLA-4,PD-L1 triple-deficient T cells to B7-1 demonstrated that PD-L1 and B7-1 interact specifically to inhibit T cell activation. Our findings point to a substantial bidirectional inhibitory interaction between B7-1 and PD-L1 and add an additional dimension to immunoregulatory functions of the B7:CD28 family.

Structure of CD84 provides insight into SLAM family function

The signaling lymphocyte activation molecule (SLAM) family includes homophilic and heterophilic receptors that modulate both adaptive and innate immune responses. These receptors share a common ectodomain organization: a membrane-proximal immunoglobulin constant domain and a membrane-distal immunoglobulin variable domain that is responsible for ligand recognition. CD84 is a homophilic family member that enhances IFN-gamma secretion in activated T cells. Our solution studies revealed that CD84 strongly self-associates with a K(d) in the submicromolar range. These data, in combination with previous reports, demonstrate that the SLAM family homophilic affinities span at least three orders of magnitude and suggest that differences in the affinities may contribute to the distinct signaling behavior exhibited by the individual family members. The 2.0 A crystal structure of the human CD84 immunoglobulin variable domain revealed an orthogonal homophilic dimer with high similarity to the recently reported homophilic dimer of the SLAM family member NTB-A. Structural and chemical differences in the homophilic interfaces provide a mechanism to prevent the formation of undesired heterodimers among the SLAM family homophilic receptors. These structural data also suggest that, like NTB-A, all SLAM family homophilic dimers adopt a highly kinked organization spanning an end-to-end distance of approximately 140 A. This common molecular dimension provides an opportunity for all two-domain SLAM family receptors to colocalize within the immunological synapse and bridge the T cell and antigen-presenting cell.

Using prior knowledge in the determination of macromolecular size-distributions by analytical ultracentrifugation

Analytical ultracentrifugation has reemerged as a widely used tool for the study of ensembles of biological macromolecules to understand, for example, their size-distribution and interactions in free solution. Such information can be obtained from the mathematical analysis of the concentration and signal gradients across the solution column and their evolution in time generated as a result of the gravitational force. In sedimentation velocity analytical ultracentrifugation, this analysis is frequently conducted using high resolution, diffusion-deconvoluted sedimentation coefficient distributions. They are based on Fredholm integral equations, which are ill-posed unless stabilized by regularization. In many fields, maximum entropy and Tikhonov-Phillips regularization are well-established and powerful approaches that calculate the most parsimonious distribution consistent with the data and prior knowledge, in accordance with Occam's razor. In the implementations available in analytical ultracentrifugation, to date, the basic assumption implied is that all sedimentation coefficients are equally likely and that the information retrieved should be condensed to the least amount possible. Frequently, however, more detailed distributions would be warranted by specific detailed prior knowledge on the macromolecular ensemble under study, such as the expectation of the sample to be monodisperse or paucidisperse or the expectation for the migration to establish a bimodal sedimentation pattern based on Gilbert-Jenkins' theory for the migration of chemically reacting systems. So far, such prior knowledge has remained largely unused in the calculation of the sedimentation coefficient or molecular weight distributions or was only applied as constraints. In the present paper, we examine how prior expectations can be built directly into the computational data analysis, conservatively in a way that honors the complete information of the experimental data, whether or not consistent with the prior expectation. Consistent with analogous results in other fields, we find that the use of available prior knowledge can have a dramatic effect on the resulting molecular weight, sedimentation coefficient, and size-and-shape distributions and can significantly increase both their sensitivity and their resolution. Further, the use of multiple alternative prior information allows us to probe the range of possible interpretations consistent with the data.

Crystal structure of murine CstF-77: dimeric association and implications for polyadenylation of mRNA precursors

Cleavage stimulation factor (CstF) is a heterotrimeric protein complex essential for polyadenylation of mRNA precursors. The 77 kDa subunit, CstF-77, is known to mediate interactions with the other two subunits of CstF as well as with other components of the polyadenylation machinery. We report here the crystal structure of the HAT (half a TPR) domain of murine CstF-77, as well as its C-terminal subdomain. Structural and biochemical studies show that the HAT domain consists of two subdomains, HAT-N and HAT-C domains, with drastically different orientations of their helical motifs. The structures reveal a highly elongated dimer, spanning 165 A, with the dimerization mediated by the HAT-C domain. Light-scattering studies, yeast two-hybrid assays, and analytical ultracentrifugation measurements confirm this self-association. The mode of dimerization and the relative arrangement of the HAT-N and HAT-C domains are unique to CstF-77. Our data support a role for CstF dimerization in pre-mRNA 3' end processing.

T cell immunoglobulin mucin-3 crystal structure reveals a galectin-9-independent ligand-binding surface

The T cell immunoglobulin mucin (Tim) family of receptors regulates effector CD4(+) T cell functions and is implicated in autoimmune and allergic diseases. Tim-3 induces immunological tolerance, and engagement of the Tim-3 immunoglobulin variable (IgV) domain by galectin-9 is important for appropriate termination of T helper 1-immune responses. The 2 A crystal structure of the Tim-3 IgV domain demonstrated that four cysteines, which are invariant within the Tim family, form two noncanonical disulfide bonds, resulting in a surface not present in other immunoglobulin superfamily members. Biochemical and biophysical studies demonstrated that this unique structural feature mediates a previously unidentified galectin-9-independent binding process and suggested that this structural feature is conserved within the entire Tim family. The current work provided a graphic example of the relationship between sequence, structure, and function and suggested that the interplay between multiple Tim-3-binding activities contributes to the regulated assembly of signaling complexes required for effective Th1-mediated immunity.

Conformation of the EPEC Tir protein in solution: investigating the impact of serine phosphorylation at positions 434/463

The translocated intimin receptor (Tir) is a key virulence factor of enteropathogenic Escherichia coli and related bacteria. During infection, Tir is translocated via a type III secretion system into host intestinal epithelial cells, where it inserts into the target cell membrane and acts as a receptor for the bacterial adhesin intimin. The effects of phosphorylation by cAMP-dependent kinase at two serine residues (Ser-434 and Ser-463) within the C-terminal domain of Tir, which may be involved in mediating structural/electrostatic changes in the protein to promote membrane insertion or intermolecular interactions, have previously been investigated. This study has focused on defining the conformation of Tir in solution and assessing any conformational changes associated with serine phosphorylation at positions 434/463. In addition to phosphorylated protein, combinations of Ala (unphosphorylatable) and Asp (phosphate-mimic) mutations of Ser-434 and Ser-463 have been generated, and a range of techniques (sodium dodecyl sulfate polyacrylamide gel electrophoresis, circular dichroism spectroscopy, analytical ultracentrifugation) used to further dissect the structural role and functional implications of changes in residue size/charge at these positions. The results have shown that under physiological NaCl concentrations, Tir is a monomer and adopts a highly elongated state in solution, consistent with a natively unfolded conformation. Despite this, perturbations in the structure in response to buffer conditions and the nature of the residues at positions 434 and 463 are apparent, and may be functionally relevant.

Quantitation of aggregate levels in a recombinant humanized monoclonal antibody formulation by size-exclusion chromatography, asymmetrical flow field flow fractionation, and sedimentation velocity

Size-exclusion high-performance liquid chromatography (SE-HPLC, SEC) is the long-standing biopharmaceutical industry standard for quantitation of soluble protein aggregates. Recently, sedimentation velocity analytical ultracentrifugation (SV-AUC) has emerged as a possible orthogonal technique to SEC for soluble aggregate quantitation. Moreover, asymmetrical flow field flow fractionation (AF4) has shown early promise in quantifying protein aggregates, both soluble and insoluble. We report soluble aggreg ate quantities measured by SEC, AF4, and SV-AUC analyzed by SEDFIT/c(s) for acid stressed and unstressed samples of a recombinant humanized monoclonal antibody. In equivalent antibody samples, SV-AUC, and AF4 detect markedly higher total aggregate levels than SEC. Furthermore, SEC fails to detect higher molecular weight soluble aggregates apparent in SV-AUC and AF4 analyses. Pooled fractions containing soluble dimeric aggregates were purified and re-analyzed by both SV-AUC and SEC. Reinjection of purified dimer onto the SEC column induces formation of detectable quantities of monomer and trimer. All sample types show statistically significant (p-values<0.01) antibody losses through the SEC column. This incomplete mass recovery from SEC indicates probable antibody physical adsorption to gel filtration media. Analysis of the sedimentation behavior of high molecular weight components suggests increased molecular asphericity with increasing molecular weight. We present an aggregation model based on nearly linear end-to-end assembly of monomeric subunits which is shown to be consistent with SV-AUC, SEC, AF4, and dynamic light scattering (DLS) results.

Oligomeric behavior of the RND transporters CusA and AcrB in micellar solution of detergent

We have used analytical ultracentrifugation to explore the oligomeric states of AcrB and CusA in micellar solution of detergent. These two proteins belong to the resistance, nodulation and cell division (RND) family of efflux proteins that are involved in multiple drug and heavy metal resistance. Only the structure of AcrB has been determined so far. Although functional RND proteins should assemble as trimers as AcrB does, both AcrB and CusA form a mixture of quaternary structures (from monomer to heavy oligomer) in detergent solution. The distribution of the oligomeric states was studied as a function of different parameters: nature and concentration of the detergent, ionic strength, pH, protein concentration. This pseudo-heterogeneity does not hamper the crystallization of AcrB as a homotrimer.

Development and characterization of recombinant human Fc:OX40L fusion protein linked via a coiled-coil trimerization domain

OX40 (CD134) is a potent costimulatory molecule found on the surface of activated CD4(+) and CD8(+) T cells. Immunotherapy with OX40 agonists administered in vivo has demonstrated efficacy in several murine tumor models. A phase I clinical trial is currently underway in patients with advanced cancer using a mouse anti-CD134 monoclonal antibody. Therapy with this antibody will likely be limited to one cycle because patients develop neutralizing human anti-mouse antibody (HAMA). Therefore, we developed a humanized OX40 agonist that links the extracellular domain of human OX40L to the Fc domain of human IgG(1) via a trimerizing isoleucine zipper domain (ILZ). Physical characterization by velocity sedimentation revealed that this novel construct, hFcILZOX40L, was assembled into hexamers in which the Fc domains formed three disulfide-bonded dimers and the ILZ-OX40L domains formed two trimers. Trimerization of the ILZ domain was necessary to achieve appropriate assembly. In vitro biologic activity of the hFcILZOX40L hexamer was equivalent to the activity of agonist antibodies in plate-bound assays and was superior when the agonists were tested as soluble agents. Our ultimate goal is to use this recombinant molecule in a future clinical trial, and we feel that the OX40L hexamer will have equivalent or superior agonist activity in vivo when compared to an anti-OX40 antibody.

Defining how ubiquitin receptors hHR23a and S5a bind polyubiquitin

Ubiquitin receptors connect substrate ubiquitylation to proteasomal degradation. HHR23a binds proteasome subunit 5a (S5a) through a surface that also binds ubiquitin. We report that UIM2 of S5a binds preferentially to hHR23a over polyubiquitin, and we provide a model for the ternary complex that we expect represents one of the mechanisms used by the proteasome to capture ubiquitylated substrates. Furthermore, we demonstrate that hHR23a is surprisingly adept at sequestering the ubiquitin moieties of a polyubiquitin chain, and provide evidence that it and the ubiquitylated substrate are committed to each other after binding.

MukE and MukF form two distinct high affinity complexes

The MukBFE complex is essential for chromosome segregation and condensation in Escherichia coli. MukB is functionally related to the structural maintenance of chromosomes (SMC) proteins. Similar to SMCs, MukB requires accessory proteins (MukE and MukF) to form a functional complex for DNA segregation. MukF is a member of the kleisin family, which includes proteins that commonly mediate the interaction between SMCs and other accessory proteins, suggesting that the similarities between the MukBFE and the SMC complexes extend beyond MukB. Although SMCs have been carefully studied, little is known about the roles of their accessory components. In the present work, we characterize the oligomeric states of MukE and MukF using size exclusion chromatography and analytical ultracentrifugation. MukE self-associates to form dimers (K(D) 18 +/- 3 mum), which in turn interact with the MukF dimer to form two distinct high affinity complexes having 2:2 and 2:4 stoichiometries (F:E). Intermediate complexes are not found, and thus we propose that the equilibrium between these two complexes determines the formation of a functional MukBFE with stoichiometry 2:2:2.

Interaction of yeast RNA-binding proteins Nrd1 and Nab3 with RNA polymerase II terminator elements

Yeast RNA-binding proteins Nrd1 and Nab3 direct transcription termination of sn/snoRNA transcripts, some mRNA transcripts, and a class of intergenic and anti-sense transcripts. Recognition of Nrd1- and Nab3-binding sites is a critical first step in the termination and subsequent processing or degradation of these transcripts. In this article, we describe the purification and characterization of an Nrd1-Nab3 heterodimer. This Nrd1-Nab3 complex binds specifically to RNA sequences derived from a snoRNA terminator. The relative binding to mutant terminators correlates with the in vivo termination efficiency of these mutations, indicating that the primary specificity determinant in nonpoly(A) termination is Nrd1-Nab3 binding. In addition, several snoRNA terminators contain multiple Nrd1- and Nab3-binding sites and we show that multiple heterodimers bind cooperatively to one of these terminators in vitro.

Monitoring the homogeneity of adenovirus preparations (a gene therapy delivery system) using analytical ultracentrifugation

This study explores the capability of modern analytical ultracentrifugation (AUC) to characterize the homogeneity, under product formulation conditions, of preparations of adenovirus vectors used in gene therapy and to assess the lot-to-lot consistency of this unique drug product. We demonstrate that a single sedimentation velocity run on an adenovirus sample can detect and accurately quantify a number of different forms of virus particles and subvirus particles. These forms include (a) intact virus monomer particles, (b) virus aggregates, (c) empty capsids (ECs), and (d) smaller assembly intermediates or subparticles formed during normal or aberrant virus assembly (or as a result of damage to the intact adenovirus or EC material during all phases of virus production). This information, which is collected on adenovirus samples under the exact formulation conditions that exist in the adenovirus vial, is obtained by direct boundary modeling of the AUC data generated from refractometric and/or UV detection systems using the computer program SEDFIT developed by Peter Schuck. Although both detectors are useful, refractometric detection using the Rayleigh interferometer offers a key advantage for providing accurate concentration information due to the similar response factors for both protein and DNA and its insensitivity to light scattering effects. Additional AUC data obtained from analytical band sedimentation velocity and density gradient sedimentation equilibrium experiments in CsCl with UV detection were also generated. These results further support conclusions concerning the solution properties of adenovirus, the identity of the different virus species, and the overall capability of boundary sedimentation velocity analysis.

Associative and structural properties of the region of complement factor H encompassing the Tyr402His disease-related polymorphism and its interactions with heparin

Factor H (FH) is a major complement control protein in serum. The seventh short complement regulator (SCR-7) domain of the 20 in FH is associated with age-related macular degeneration through a Tyr402His polymorphism. The recombinant SCR-6/8 domains containing either His402 or Tyr402 and their complexes with a heparin decasaccharide were studied by analytical ultracentrifugation and X-ray scattering. The sedimentation coefficient is concentration dependent, giving a value of 2.0 S at zero concentration and a frictional ratio f/f(o) of 1.2 for both allotypes. The His402 allotype showed a slightly greater self-association than the Tyr402 allotype, and small amounts of dimeric SCR-6/8 were found for both allotypes in 50 mM, 137 mM and 250 mM NaCl buffers. Sedimentation equilibrium data were interpreted in terms of a monomer-dimer equilibrium with a dissociation constant of 40 microM for the His402 form. The Guinier radius of gyration R(G) of 3.1-3.3 nm and the R(G)/R(O) ratio of 2.0-2.1 showed that SCR-6/8 is relatively extended in solution. The distance distribution function P(r) showed a maximum dimension of 10 nm, which is less than the length expected for a linear domain arrangement. The constrained scattering and sedimentation modelling of FH SCR-6/8 showed that bent SCR arrangements fit the data better than linear arrangements. Previously identified heparin-binding residues were exposed on the outside curvature of this bent domain structure. Heparin caused the formation of a more linear structure, possibly by binding to residues in the linker. It was concluded that the His402 allotype may self-associate more readily than the Tyr402 allotype, SCR-6/8 is partly responsible for the folded-back structure of intact FH, and SCR-6/8 changes conformation upon heparin binding.

Long-range cooperative interactions modulate dimerization in SARS 3CLpro

Severe acute respiratory syndrome (SARS) is an infectious disease caused by the human coronavirus, SARS-CoV. The main viral protease, SARS 3CLpro, is a validated target for the development of antiviral therapies. Since the enzyme is a homodimer and the individual monomers are inactive, two approaches are being used to develop inhibitors: enzyme activity inhibitors that target the active site and dimerization inhibitors. Dimerization inhibitors are usually targeted to the dimerization interface and need to compete with the attractive forces between subunits to be effective. In this paper, we show that the dimerization of SARS 3CLpro is also under allosteric control and that additional and energetically more favorable target sites away from the dimerization interface may also lead to subunit dissociation. We previously identified a cluster of conserved serine residues (Ser139, Ser144, and Ser147) located adjacent to the active site of 3CLpro that could effectively be targeted to inactivate the protease [Bacha, U et al. (2004) Biochemistry 43, 4906-4912]. Mutation of any of these serine residues to alanine had a debilitating effect on the catalytic activity of 3CLpro. In particular, the mutation of Ser147, which does not make any contact with the opposing subunit and is located approximately 9 A away from the dimer interface, totally inhibited dimerization and resulted in a complete loss of enzymatic activity. The finding that residues away from the dimer interface are able to control dimerization defines alternative targets for the design of dimerization inhibitors.

NTB-A receptor crystal structure: insights into homophilic interactions in the signaling lymphocytic activation molecule receptor family

The signaling lymphocytic activation molecule (SLAM) family includes homophilic and heterophilic receptors that regulate both innate and adaptive immunity. The ectodomains of most SLAM family members are composed of an N-terminal IgV domain and a C-terminal IgC2 domain. NK-T-B-antigen (NTB-A) is a homophilic receptor that stimulates cytotoxicity in natural killer (NK) cells, regulates bactericidal activities in neutrophils, and potentiates T helper 2 (Th2) responses. The 3.0 A crystal structure of the complete NTB-A ectodomain revealed a rod-like monomer that self-associates to form a highly kinked dimer spanning an end-to-end distance of approximately 100 A. The NTB-A homophilic and CD2-CD58 heterophilic dimers show overall structural similarities but differ in detailed organization and physicochemical properties of their respective interfaces. The NTB-A structure suggests a mechanism responsible for binding specificity within the SLAM family and imposes physical constraints relevant to the colocalization of SLAM-family proteins with other signaling molecules in the immunological synapse.

Direct Observation of Oligomeric Species formed in the Early Stages of Amyloid Fibril Formation using Electrospray Ionisation Mass Spectrometry

Numerous debilitating human disorders result from protein misfolding and amyloid formation. Despite the grave nature of these maladies, our understanding of the structural mechanism of fibril assembly is limited. Of paramount importance is the need to identify and characterize oligomeric species formed early during fibril assembly, so that the nature of the initiating assembly mechanism can be revealed and species that may be toxic to cells identified. However, the transient nature of early oligomeric species, combined with their heterogeneity and instability, has precluded detailed analysis to date. Here, we have used electrospray ionisation mass spectrometry (ESI-MS), complemented by analytical ultracentrifugation (AUC) and measurements of thioflavin-T fluorescence, to monitor the early stages of assembly of amyloid-like fibrils formed from human beta-2-microglobulin (beta2m) in vitro. We show that worm-like fibrils that form with nucleation-independent kinetics assemble by a mechanism consistent with monomer addition, with species ranging from monomer to > or = 13-mer being identified directly and uniquely as transient assembly intermediates. By contrast, only monomers, dimers, trimers and tetramers are observed during nucleated growth, which leads to the formation of long straight fibrils. The results highlight the unique power of non-covalent ESI-MS to identify protein assembly intermediates in complex heterogeneous systems and demonstrate its great potential to identify and characterise individual species formed early during amyloid assembly.

Cofacial Heme Binding is Linked to Dimerization by a Bacterial Heme Transport Protein

Campylobacter jejuni is a leading bacterial cause of food-borne illness in the developed world. Like most pathogens, C. jejuni requires iron that must be acquired from the host environment. Although the iron preference of the food-borne pathogen C. jejuni is not established, this organism possesses heme transport systems to acquire iron. ChaN is an iron-regulated lipoprotein from C. jejuni proposed to be associated with ChaR, an outer-membrane receptor. Mutation of PhuW, a ChaN orthologue in Pseudomonas aeruginosa, compromises growth on heme as a sole iron source. The crystal structure of ChaN, determined to 1.9 A resolution reveals that ChaN is comprised of a large parallel beta-sheet with flanking alpha-helices and a smaller domain consisting of alpha-helices. Unexpectedly, two cofacial heme groups ( approximately 3.5 A apart with an inter-iron distance of 4.4 A) bind in a pocket formed by a dimer of ChaN monomers. Each heme iron is coordinated by a single tyrosine from one monomer, and the propionate groups are hydrogen bonded by a histidine and a lysine from the other monomer. Sequence analyses reveal that these residues are conserved among ChaN homologues from diverse bacterial origins. Electronic absorption and electron paramagnetic resonance (EPR) spectroscopy are consistent with heme binding through tyrosine coordination by ChaN in solution yielding a high-spin heme iron structure in a pH-dependent equilibrium with a low-spin species. Analytical ultracentrifugation demonstrates that apo-ChaN is predominantly monomeric and that dimerization occurs with heme binding such that the stability constant for dimer formation increases by 60-fold.

Role of analytical ultracentrifugation in assessing the aggregation of protein biopharmaceuticals

In developing and manufacturing protein biopharmaceuticals, aggregation is a parameter that needs careful monitoring to ensure the quality and consistency of the final biopharmaceutical drug product. The analytical method of choice used to perform this task is size-exclusion chromatography (SEC). However, it is becoming more and more apparent that considerable care is required in assessing the accuracy of SEC data. One old analytical tool that is now reappearing to help in this assessment is analytical ultracentrifugation (AUC). Developments in AUC hardware and, more importantly, recent developments in AUC data analysis computer programs have converged to provide this old biophysical tool with the ability to extract very high resolution size information about the molecules in a given sample from a simple sedimentation velocity experiment. In addition, AUC allows sample testing to be conducted in the exact or nearly exact liquid formulation or reconstituted liquid formulation of the biopharmaceutical in the vial, with minimal surface area contact with extraneous materials. As a result, AUC analysis can provide detailed information on the aggregation of a biopharmaceutical, while avoiding many of the major problems that can plague SEC, thus allowing AUC to be used as an orthogonal method to verify SEC aggregation information and the associating properties of biopharmaceuticals.

Characterization of an amino-terminal dimerization domain from retroviral restriction factor Fv1

The Fv1 protein is an endogenous factor in mice that confers resistance to infection by certain classes of murine leukemia virus, a phenomenon referred to as restriction. The mechanism of restriction is not understood, and the low endogenous level of Fv1 in cells has prevented any biochemical or biophysical analysis of the protein. We have now purified recombinant Fv1(n) protein from a baculovirus system and demonstrate that Fv1 exists in a multimeric form. Furthermore, we have mapped the position of two domains within the protein using limited proteolysis. Biophysical characterization of the N-terminal domain reveals that it comprises a highly helical and extended dimeric structure. Based on these biochemical and biophysical data, we propose a model for the arrangement of domains in Fv1 and suggest that dimerization of the N-terminal domain is necessary for Fv1 function to allow the protein to interact with multiple capsid protomers in retroviral cores.

Structural basis for platelet collagen responses by the immune-type receptor glycoprotein VI

Activation of circulating platelets by exposed vessel wall collagen is a primary step in the pathogenesis of heart attack and stroke, and drugs to block platelet activation have successfully reduced cardiovascular morbidity and mortality. In humans and mice, collagen activation of platelets is mediated by glycoprotein VI (GPVI), a receptor that is homologous to immune receptors but bears little sequence similarity to known matrix protein adhesion receptors. Here we present the crystal structure of the collagen-binding domain of human GPVI and characterize its interaction with a collagen-related peptide. Like related immune receptors, GPVI contains 2 immunoglobulin-like domains arranged in a perpendicular orientation. Significantly, GPVI forms a back-to-back dimer in the crystal, an arrangement that could explain data previously obtained from cell-surface GPVI inhibition studies. Docking algorithms identify 2 parallel grooves on the GPVI dimer surface as collagen-binding sites, and the orientation and spacing of these grooves precisely match the dimensions of an intact collagen fiber. These findings provide a structural basis for the ability of an immunetype receptor to generate signaling responses to collagen and for the development of GPVI inhibitors as new therapies for human cardiovascular disease.

Characterization of Human gamma-glutamyl hydrolase in solution demonstrates that the enzyme is a non-dissociating homodimer

Human gamma-glutamyl hydrolase (hGH) is a key enzyme in the metabolism of folic acid and in the pharmacology of many antifolate drugs. hGH catalyzes removal of the poly-gamma-glutamate chains of intracellular folic acid and antifolates. hGH crystallized as a homodimer with two putative active sites. However, the quaternary structure and the number of species of the enzyme in solution have not been determined. hGH has now been characterized using analytical ultracentrifugation and dynamic light scattering. HisTag fusion proteins of wild-type hGH, rat GH, and hGH expressed as a glycosylated protein were studied. Analyses of HisTag wild-type hGH were conducted over a range of protein concentrations (1.4-200 microM), ionic strengths (0-1 M NaCl), and pH (4.5-8.5). A single species with a molecular mass consistent with a homodimer was observed. Glycosylated hGH and HisTag rat gamma-glutamyl hydrolase also formed very stable homodimers. The lack of dissociation of the dimer, the large monomer-monomer interface, and the presence of catalytically essential Tyr-36 in the homodimer interface sequences suggest that homodimer formation is required for the hGH monomer to fold into an active conformation. The conservation of hGH monomer-monomer interface sequences in other mammalian and plant gamma-glutamyl hydrolase molecules suggests that they also exist as stable homodimers.

Progress in the characterization of synthetic (supramolecular) polymers by analytical ultracentrifugation

Analytical ultracentrifugation (AUC) is the leading technique for determining the molar mass, state of association in solution, and association constants of biological macromolecules. Even though it is little used for supramolecular polymers, this technique has already been shown to represent one of the best options in the characterization of these systems. The use of supramolecular assemblies in the field of nanotechnology requires the arrangement of such systems on surfaces, from solution. Therefore, the control and investigation of solution properties is of major importance. In this contribution we highlight the applicability and advantages of using AUC by presenting a summary of the results of the past few years on the characterization of various types of synthetic polymers and supramolecular polymer systems.

Is Dimerization Required for the Catalytic Activity of Bacterial Biotin Carboxylase?

Acetyl-coenzyme A carboxylases (ACCs) have crucial roles in fatty acid metabolism. The biotin carboxylase (BC) subunit of Escherichia coli ACC is believed to be active only as a dimer, although the crystal structure shows that the active site of each monomer is 25 A from the dimer interface. We report here biochemical, biophysical, and structural characterizations of BC carrying single-site mutations in the dimer interface. Our studies demonstrate that two of the mutants, R19E and E23R, are monomeric in solution but have only a 3-fold loss in catalytic activity. The crystal structures of the E23R and F363A mutants show that they can still form the correct dimer at high concentrations. Our data suggest that dimerization is not an absolute requirement for the catalytic activity of the E. coli BC subunit, and we propose a new model for the molecular mechanism of action for BC in multisubunit and multidomain ACCs.

The tetramer structure of the Nervy homology two domain, NHR2, is critical for AML1/ETO's activity

AML1/ETO is the chimeric protein resulting from the t(8;21) in acute myeloid leukemia. The Nervy homology 2 (NHR2) domain in ETO mediates oligomerization and AML1/ETO's interactions with ETO, MTGR1, and MTG16, and with the corepressor molecules mSin3A and HDAC1 and HDAC3. We solved the NHR2 domain structure and found it to be an alpha-helical tetramer. We show that oligomerization contributes to AML1/ETO's inhibition of granulocyte differentiation, is essential for its ability to enhance the clonogenic potential of primary mouse bone marrow cells, and affects AML1/ETO's activity on several endogenous genes. Oligomerization is also required for AML1/ETO's interactions with ETO, MTGR1, and MTG16, but not with other corepressor molecules.

Macromolecular size-and-shape distributions by sedimentation velocity analytical ultracentrifugation

Sedimentation velocity analytical ultracentrifugation is an important tool in the characterization of macromolecules and nanoparticles in solution. The sedimentation coefficient distribution c(s) of Lamm equation solutions is based on the approximation of a single, weight-average frictional coefficient of all particles, determined from the experimental data, which scales the diffusion coefficient to the sedimentation coefficient consistent with the traditional s approximately M(2/3) power law. It provides a high hydrodynamic resolution, where diffusional broadening of the sedimentation boundaries is deconvoluted from the sedimentation coefficient distribution. The approximation of a single weight-average frictional ratio is favored by several experimental factors, and usually gives good results for chemically not too dissimilar macromolecules, such as mixtures of folded proteins. In this communication, we examine an extension to a two-dimensional distribution of sedimentation coefficient and frictional ratio, c(s,f(r)), which is representative of a more general set of size-and-shape distributions, including mass-Stokes radius distributions, c(M,R(S)), and sedimentation coefficient-molar mass distributions c(s,M). We show that this can be used to determine average molar masses of macromolecules and characterize macromolecular distributions, without the approximation of any scaling relationship between hydrodynamic and thermodynamic parameters.

Ligand-induced effects on pyruvate dehydrogenase kinase isoform 2

Tryptophan fluorescence was used to analyze binding of ligands to human pyruvate dehydrogenase isoform 2 (PDHK2) and to demonstrate effects of ligand binding on distal structure of PDHK2 that is required for binding to the inner lipoyl domain (L2) of the dihydrolipoyl acetyltransferase. Ligand-altered binding of PDHK2 to L2 and effects of specific ligands on PDHK2 oligomeric state were characterized by analytical ultracentrifugation. ATP, ADP, and pyruvate markedly quenched the tryptophan fluorescence of PDHK2 and gave maximum quenching/L0.5 estimates: approximately 53%/3 microM for ATP; approximately 49%/15 microM for ADP; and approximately 71%/approximately 590 microM for pyruvate. The conversion of Trp-383 to phenylalanine completely removed ATP- and ADP-induced quenching and > or = 80% of the absolute decrease in fluorescence due to pyruvate. The W383F-PDHK2 mutant retained high catalytic activity. Pyruvate, added after ADP, quenched Trp fluorescence with an L0.5 of 3.4 microM pyruvate, > or = 150-fold lower concentration than needed with pyruvate alone. ADP-enhanced binding of pyruvate was maintained with W383F-PDHK2. Binding of PDHK2 dimer to L2 is enhanced when L2 are housed in oligomeric structures, including the glutathione S-transferase (GST)-L2 dimer, and further strengthened by reduction of the lipoyl groups (GST-L2(red)) (Hiromasa and Roche (2003) J. Biol. Chem. 278, 33681-33693). Binding of PDHK2 to GST-L2(red) was modestly hindered by 200 microM level of ATP or ADP or 5.0 mM pyruvate; a marked change to nearly complete prevention of binding was observed with ATP or ADP plus pyruvate at only 100 microM levels, and these conditions caused PDHK2 dimer to associate to a tetramer. These changes should make major contributions to synergistic inhibition of PDHK2 activity by ADP and pyruvate. Ligand-induced changes that interfere with PDHK2 binding to GST-L2(red) may involve release of an interdomain cross arm between PDHK2 subunits in which Trp-383 plays a critical anchoring role.

Orientation and oligomerization specificity of the Bcr coiled-coil oligomerization domain

The Bcr oligomerization domain, from the Bcr-Abl oncoprotein, is an attractive therapeutic target for treating leukemias because it is required for cellular transformation. The domain homodimerizes via an antiparallel coiled coil with an adjacent short, helical swap domain. Inspection of the coiled-coil sequence does not reveal obvious determinants of helix-orientation specificity, raising the possibility that the antiparallel orientation preference and/or the dimeric oligomerization state are due to interactions of the swap domains. To better understand how structural specificity is encoded in Bcr, coiled-coil constructs containing either an N- or C-terminal cysteine were synthesized without the swap domain. When cross-linked to adopt exclusively parallel or antiparallel orientations, these showed similar circular dichroism spectra. Both constructs formed coiled-coil dimers, but the antiparallel construct was approximately 16 degrees C more stable than the parallel to thermal denaturation. Equilibrium disulfide-exchange studies confirmed that the isolated coiled-coil homodimer shows a very strong preference for the antiparallel orientation. We conclude that the orientation and oligomerization preferences of Bcr are not caused by the presence of the swap domains, but rather are directly encoded in the coiled-coil sequence. We further explored possible determinants of structural specificity by mutating residues in the d position of the coiled-coil core. Some of the mutations caused a change in orientation specificity, and all of the mutations led to the formation of higher-order oligomers. In the absence of the swap domain, these residues play an important role in disfavoring alternate states and are especially important for encoding dimeric oligomerization specificity.

Cooperative binding of the C.AhdI controller protein to the C/R promoter and its role in endonuclease gene expression

The controller (C) proteins of a wide variety of restriction-modification (R-M) systems are thought to regulate expression of the endonuclease (R) gene by a genetic switch that ensures that methylation precedes endonuclease expression. Previous DNA footprinting experiments with C.AhdI have located the binding site upstream of the C and R genes in the AhdI R-M system, and the structure of C.AhdI has recently been determined. Here, we provide evidence that the binding site can accommodate either one or two dimers of C.AhdI in a concentration-dependent manner. The dimer binding site is adjacent to the -35 hexamer site required for the interaction with RNA polymerase (RNAP); however, co-operative binding of a second dimer blocks this site. Optimum DNA binding site sizes for dimer and tetramer formation were determined to be ca 21 bp and 34 bp, respectively. The stoichiometry and affinities of relevant DNA-protein complexes have been characterised by sedimentation velocity and EMSA using native and mutant promoter sequences. Molecular models of the dimer and tetramer complexes have been constructed that are consistent with the hydrodynamic data. Our results suggest a mechanism for both positive and negative regulation of endonuclease expression, whereby at moderate levels of C.AhdI, the protein binds to the promoter as a dimer and stimulates transcription by the interaction with RNAP. As the levels of C.AhdI increase further, binding of the second dimer competes with RNAP, thus down-regulating transcription of its own gene, and hence that of the endonuclease.

Self-association and chaperone activity of Hsp27 are thermally activated

The small heat shock protein 27 (Hsp27) is an oligomeric, molecular chaperone in vitro. This chaperone activity and other physiological roles attributed to Hsp27 have been reported to depend on the state of self-association. In the present work, we have used sedimentation velocity experiments to demonstrate that the self-association of Hsp27 is independent of pH and ionic strength but increases significantly as the temperature is increased from 10 to 40 degrees C. The largest oligomers formed at 10 degrees C are approximately 8-12 mer, whereas at 40 degrees C oligomers as large as 22-30 mer are observed. Similarly, the chaperone activity of Hsp27 as indicated by its ability to inhibit dithiothreitol-induced insulin aggregation also increases with increased temperature, with a particularly sharp increase in activity as temperature is increased from 34 to 43 degrees C. Similar studies of an Hsp27 triple variant that mimics the behavior of the phosphorylated protein establish that this protein has greatly diminished chaperone activity that responds minimally to increased temperature. We conclude that Hsp27 can exploit a large number of oligomerization states and that the range of oligomer size and the magnitude of chaperone activity increase significantly as temperature is increased over the range that is relevant to the physiological heat shock response.

The N-terminal octapeptide acts as a dimerization inhibitor of SARS coronavirus 3C-like proteinase

The 3C-like proteinase of severe acute respiratory syndrome (SARS) coronavirus has been proposed to be a key target for structural-based drug design against SARS. Accurate determination of the dimer dissociation constant and the role of the N-finger (residues 1–7) will provide more insights into the enzyme catalytic mechanism of SARS 3CL proteinase. The dimer dissociation constant of the wild-type protein was determined to be 14.0 μM by analytical ultracentrifugation method. The N-finger fragment of the enzyme plays an important role in enzyme dimerization as shown in the crystal structure. Key residues in the N-finger have been studied by site-directed mutagenesis, enzyme assay, and analytical ultracentrifugation. A single mutation of M6A was found to be critical to maintain the dimer structure of the enzyme. The N-terminal octapeptide N8 and its mutants were also synthesized and tested for their potency as dimerization inhibitors. Peptide cleavage assay confirms that peptide N8 is a dimerization inhibitor with a K_i of 2.20 mM. The comparison of the inhibitory activities of N8 and its mutants indicates that the hydrophobic interaction of Met-6 and the electrostatic interaction of Arg-4 contribute most for inhibitor binding. This study describes the first example of inhibitors targeting the dimeric interface of SARS 3CL proteinase, providing a novel strategy for drug design against SARS and other coronaviruses.

NAP1 Modulates Binding of Linker Histone H1 to Chromatin and Induces an Extended Chromatin Fiber Conformation

NAP1 (nucleosome assembly protein 1) is a histone chaperone that has been described to bind predominantly to the histone H2A.H2B dimer in the cell during shuttling of histones into the nucleus, nucleosome assembly/remodeling, and transcription. Here it was examined how NAP1 interacts with chromatin fibers isolated from HeLa cells. NAP1 induced a reversible change toward an extended fiber conformation as demonstrated by sedimentation velocity ultracentrifugation experiments. This transition was due to the removal of the linker histone H1. The H2A.H2B dimer remained stably bound to the native fiber fragments and to fibers devoid of linker histone H1. This was in contrast to mononucleosome substrates, which displayed a NAP1-induced removal of a single H2A.H2B dimer from the core particle. The effect of NAP1 on the chromatin fiber structure was examined by scanning/atomic force microscopy. A quantitative image analysis of approximately 36,000 nucleosomes revealed an increase of the average internucleosomal distance from 22.3 +/- 0.4 to 27.6 +/- 0.6 nm, whereas the overall fiber structure was preserved. This change reflects the disintegration of the chromatosome due to binding of H1 to NAP1 as chromatin fibers stripped from H1 showed an average nucleosome distance of 27.4 +/- 0.8 nm. The findings suggest a possible role of NAP1 in chromatin remodeling processes involved in transcription and replication by modulating the local linker histone content.

Behavior of Tn3 resolvase in solution and its interaction with res

The solution properties of Tn3 resolvase (Tn3R) were studied by sedimentation equilibrium, sedimentation velocity analytical ultracentrifugation, and small-angle neutron scattering. Tn3R was found to be in a monomer-dimer self-association equilibrium, with a dissociation constant of K(D)(1-2)=50 microM. Sedimentation velocity and small-angle neutron scattering data are consistent with a solution structure of dimeric Tn3R similar to that of gammadelta resolvase in a co-crystal structure, but with the DNA-binding domains in a more extended conformation. The solution conformations of sites I, II, and III were studied with small angle x-ray scattering and modeled using rigid-body and ab initio techniques. The structures of these sites do not show any distortion, at low resolution, from B-DNA. The equilibrium binding properties of Tn3R to the individual binding sites in res were investigated by employing fluorescence anisotropy measurements. It was found that site II and site III have the highest affinity for Tn3R, followed by site I. Finally, the affinity of Tn3R for nonspecific DNA was assayed by competition experiments.

A mechanism for assembly of complexes of vitronectin and plasminogen activator inhibitor-1 from sedimentation velocity analysis

Plasminogen activator inhibitor-1 (PAI-1) and vitronectin are cofactors involved in pathological conditions such as injury, inflammation, and cancer, during which local levels of PAI-1 are increased and the active serpin forms complexes with vitronectin. These complexes become deposited into surrounding tissue matrices, where they regulate cell adhesion and pericellular proteolysis. The mechanism for their co-localization has not been elucidated. We hypothesize that PAI-1-vitronectin complexes form in a stepwise and concentration-dependent fashion via 1:1 and 2:1 intermediates, with the 2:1 complex serving a key role in assembly of higher order complexes. To test this hypothesis, sedimentation velocity experiments in the analytical ultracentrifuge were performed to identify different PAI-1-vitronectin complexes. Analysis of sedimentation data invoked a novel multisignal method to discern the stoichiometry of the two proteins in the higher-order complexes formed (Balbo, A., Minor, K. H., Velikovsky, C. A., Mariuzza, R. A., Peterson, C. B., and Schuck, P. (2005) Proc. Natl. Acad. Sci. U. S. A. 102, 81-86). Our results demonstrate that PAI-1 and vitronectin assemble into higher order forms via a pathway that is triggered upon saturation of the two PAI-1-binding sites of vitronectin to form the 2:1 complex. This 2:1 PAI-1-vitronectin complex, with a sedimentation coefficient of 6.5 S, is the key intermediate for the assembly of higher order complexes.

Design of a heterospecific, tetrameric, 21-residue miniprotein with mixed alpha/beta structure

The study of short, autonomously folding peptides, or "miniproteins," is important for advancing our understanding of protein stability and folding specificity. Although many examples of synthetic alpha-helical structures are known, relatively few mixed alpha/beta structures have been successfully designed. Only one mixed-secondary structure oligomer, an alpha/beta homotetramer, has been reported thus far. In this report, we use structural analysis and computational design to convert this homotetramer into the smallest known alpha/beta-heterotetramer. Computational screening of many possible sequence/structure combinations led efficiently to the design of short, 21-residue peptides that fold cooperatively and autonomously into a specific complex in solution. A 1.95 A crystal structure reveals how steric complementarity and charge patterning encode heterospecificity. The first- and second-generation heterotetrameric miniproteins described here will be useful as simple models for the analysis of protein-protein interaction specificity and as structural platforms for the further elaboration of folding and function.

Sedimentation velocity analysis of heterogeneous protein-protein interactions: Lamm equation modeling and sedimentation coefficient distributions c(s)

We describe algorithms for solving the Lamm equations for the reaction-diffusion-sedimentation process in analytical ultracentrifugation, and examine the potential and limitations for fitting experimental data. The theoretical limiting case of a small, uniformly distributed ligand rapidly reacting with a larger protein in a "constant bath" of the ligand is recapitulated, which predicts the reaction boundary to sediment with a single sedimentation and diffusion coefficient. As a consequence, it is possible to express the sedimentation profiles of reacting systems as c(s) distribution of noninteracting Lamm equation solutions, deconvoluting the effects of diffusion. For rapid reactions, the results are quantitatively consistent with the "constant bath" approximation, showing c(s) peaks at concentration-dependent positions. For slower reactions, the deconvolution of diffusion is still partially successful, with c(s) resolving peaks that reflect the populations of sedimenting species. The transition between c(s) peaks describing reaction boundaries of moderately strong interactions (K(D) approximately 10(-6) M) or resolving sedimenting species was found to occur in a narrow range of dissociation rate constant between 10(-3) and 10(-4) s(-1). The integration of the c(s) peaks can lead to isotherms of species populations or s-value of the reaction boundary, respectively, which can be used for the determination of the equilibrium binding constant.

Sedimentation velocity analysis of heterogeneous protein-protein interactions: sedimentation coefficient distributions c(s) and asymptotic boundary profiles from Gilbert-Jenkins theory

Interacting proteins in rapid association equilibrium exhibit coupled migration under the influence of an external force. In sedimentation, two-component systems can exhibit bimodal boundaries, consisting of the undisturbed sedimentation of a fraction of the population of one component, and the coupled sedimentation of a mixture of both free and complex species in the reaction boundary. For the theoretical limit of diffusion-free sedimentation after infinite time, the shapes of the reaction boundaries and the sedimentation velocity gradients have been predicted by Gilbert and Jenkins. We compare these asymptotic gradients with sedimentation coefficient distributions, c(s), extracted from experimental sedimentation profiles by direct modeling with superpositions of Lamm equation solutions. The overall shapes are qualitatively consistent and the amplitudes and weight-average s-values of the different boundary components are quantitatively in good agreement. We propose that the concentration dependence of the area and weight-average s-value of the c(s) peaks can be modeled by isotherms based on Gilbert-Jenkins theory, providing a robust approach to exploit the bimodal structure of the reaction boundary for the analysis of experimental data. This can significantly improve the estimates for the determination of binding constants and hydrodynamic parameters of the complexes.

Critical assessment of important regions in the subunit association and catalytic action of the severe acute respiratory syndrome coronavirus main protease

The severe acute respiratory syndrome (SARS) coronavirus (CoV) main protease represents an attractive target for the development of novel anti-SARS agents. The tertiary structure of the protease consists of two distinct folds. One is the N-terminal chymotrypsin-like fold that consists of two structural domains and constitutes the catalytic machinery; the other is the C-terminal helical domain, which has an unclear function and is not found in other RNA virus main proteases. To understand the functional roles of the two structural parts of the SARS-CoV main protease, we generated the full-length of this enzyme as well as several terminally truncated forms, different from each other only by the number of amino acid residues at the C- or N-terminal regions. The quaternary structure and K(d) value of the protease were analyzed by analytical ultracentrifugation. The results showed that the N-terminal 1-3 amino acid-truncated protease maintains 76% of enzyme activity and that the major form is a dimer, as in the wild type. However, the amino acids 1-4-truncated protease showed the major form to be a monomer and had little enzyme activity. As a result, the fourth amino acid seemed to have a powerful effect on the quaternary structure and activity of this protease. The last C-terminal helically truncated protease also exhibited a greater tendency to form monomer and showed little activity. We concluded that both the C- and the N-terminal regions influence the dimerization and enzyme activity of the SARS-CoV main protease.

Structural Analysis of the Laetiporus sulphureus Hemolytic Pore-forming Lectin in Complex with Sugars

LSL is a lectin produced by the parasitic mushroom Laetiporus sulphureus, which exhibits hemolytic and hemagglutinating activities. Here, we report the crystal structure of LSL refined to 2.6-A resolution determined by the single isomorphous replacement method with the anomalous scatter (SIRAS) signal of a platinum derivative. The structure reveals that LSL is hexameric, which was also shown by analytical ultracentrifugation. The monomeric protein (35 kDa) consists of two distinct modules: an N-terminal lectin module and a pore-forming module. The lectin module has a beta-trefoil scaffold that bears structural similarities to those present in toxins known to interact with galactose-related carbohydrates such as the hemagglutinin component (HA1) of the progenitor toxin from Clostridium botulinum, abrin, and ricin. On the other hand, the C-terminal pore-forming module (composed of domains 2 and 3) exhibits three-dimensional structural resemblances with domains 3 and 4 of the beta-pore-forming toxin aerolysin from the Gram-negative bacterium Aeromonas hydrophila, and domains 2 and 3 from the epsilon-toxin from Clostridium perfringens. This finding reveals the existence of common structural elements within the aerolysin-like family of toxins that could be directly involved in membrane-pore formation. The crystal structures of the complexes of LSL with lactose and N-acetyllactosamine reveal two dissacharide-binding sites per subunit and permits the identification of critical residues involved in sugar binding.

Association States of Nucleosome Assembly Protein 1 and Its Complexes with Histones

The histone chaperone NAP1 is a carrier of histones during nuclear import, nucleosome assembly, and chromatin remodeling. Analytical ultracentrifugation was used to determine the association states of NAP1 alone and in complexes with core histones. In addition, the concentration dependence of the association was quantified by determining the equilibrium dissociation constant between different NAP1 species. At physiological protein and salt concentrations the prevalent species were the NAP1 dimer and octamer. These were also the association states found to interact with histones in a stoichiometry of one NAP1 monomer per histone. Based on these results a model for a cell cycle-dependent shift of the NAP1 dimer-octamer equilibrium is proposed that reflects different biological functions of NAP1.

Functional expression, purification, and characterization of the extra stable human placental alkaline phosphatase in the Pichia pastoris system

Human placental alkaline phosphatase was successfully cloned in the yeast system Pichia pastoris. The recombinant enzyme was over-expressed as a secreted protein in the cultured medium. The enzyme was extremely stable, which resulted in a total recovery of the enzyme activity after the purification process. The purified enzyme preparation was apparently homogeneous as examined by the polyacrylamide gel electrophoresis, analytical gel-permeation chromatography, and analytical ultracentrifugation. The final enzyme preparation showed a purification of 803-fold from the culture medium with a specific activity of 578 U/mg of protein. Fluorescence spectroscopic analyses showed multiple unfolding steps in the urea denaturation process of the homodimeric recombinant enzyme. Extensive conformational change of the enzyme in urea was detected by the analytical ultracentrifugation and the size-exclusive chromatography. The quaternary structure of the enzyme is quite stable. No indication of dissociation was observed after extensive tertiary structural changes.

Cooperative behavior of Escherichia coli cell-division protein FtsZ assembly involves the preferential cyclization of long single-stranded fibrils

A mechanism of noncooperative (isodesmic) assembly coupled with preferential cyclization of long polymers is proposed to explain the previously posed question of how a single-stranded filament of the bacterial cell-division protein FtsZ can assemble in an apparently cooperative manner. This proposal is based on results of GTP-mediated assembly of FtsZ from Escherichia coli that was studied under physiologically relevant steady-state solution conditions by a combination of methods including measurement of sedimentation velocity, atomic force and electron microscopy, and precipitation assays. Sedimentation-velocity experiments carried out at multiple protein concentrations reveal an essentially bimodal distribution of slowly sedimenting species and a relatively narrow distribution of rapidly sedimenting species that appears only above an apparent "critical concentration" of protein. In a precipitation assay, the amount of protein that pellets, which correlates with the fraction of rapidly sedimenting species observed in sedimentation-velocity experiments, increases linearly with the total concentration of protein in excess of the critical concentration. Sedimentation coefficients of the rapidly sedimenting fraction are qualitatively consistent with the presence of single-stranded cyclic oligomers with a size range of approximately 50-150 protomers, similar to polymeric single-stranded rings observed in atomic force and electron micrographs. The proposed model is in accord with the results obtained from our experimental observations.

Self-association of a Small Heat Shock Protein

Human Hsp27 oligomerizes in vivo in a phosphorylation-dependent manner that regulates the functional activity of the protein. We have studied the self-association of wild-type Hsp27 by both sedimentation velocity and sedimentation equilibrium analysis and established that the protein forms an equilibrium mixture of monomers/dimers, tetramers, 12-mers and 16-mers (20 mM Tris-HCl (pH 8.4), 100 mM NaCl, 20 degrees C). Corresponding analysis of the S15D/S78D/S82D triple variant, which is believed to mimic the behavior of phosphorylated Hsp27, establishes that this form of the protein forms primarily monomers and dimers but also forms a small fraction of very large oligomers. Variants in which critical N-terminal sequences have been deleted exhibit oligomerization behavior that is intermediate between that of the triple variant and the wild-type protein. On the other hand a C-terminal sequence deletion variant forms larger oligomers than does the wild-type protein, but also exhibits a greater fraction of smaller oligomers. Notably, the presence of an N-terminal His6-tag induces formation of much larger oligomers than observed for any other form of the protein. The results of this work establish that the wild-type protein forms smaller oligomers than previously believed, define the roles played by various structural domains in Hsp27 oligomerization, and provide improved molecular probes with better-defined properties for the design of future experiments.

Studying multiprotein complexes by multisignal sedimentation velocity analytical ultracentrifugation

Protein interactions can promote the reversible assembly of multiprotein complexes, which have been identified as critical elements in many regulatory processes in cells. The biophysical characterization of assembly products, their number and stoichiometry, and the dynamics of their interactions in solution can be very difficult. A classical first-principle approach for the study of purified proteins and their interactions is sedimentation velocity analytical ultracentrifugation. This approach allows one to distinguish different protein complexes based on their migration in the centrifugal field without isolating reversibly formed complexes from the individual components. An important existing limitation for systems with multiple components and assembly products is the identification of the species associated with the observed sedimentation rates. We developed a computational approach for integrating multiple optical signals into the sedimentation coefficient distribution analysis of components, which combines the size-dependent hydrodynamic separation with discrimination of the extinction properties of the sedimenting species. This approach allows one to deduce the stoichiometry and to assign the identity of the assembly products without prior assumptions of the number of species and the nature of their interaction. Although chromophoric labels may be used to enhance the spectral resolution, we demonstrate the ability to work label-free for three-component protein mixtures. We observed that the spectral discrimination can synergistically enhance the hydrodynamic resolution. This method can take advantage of differences in the absorbance spectra of interacting solution components, for example, for the study of protein-protein, protein-nucleic acid or protein-small molecule interactions, and can determine the size, hydrodynamic shape, and stoichiometry of multiple complexes in solution.

Analytical ultracentrifugation: a powerful 'new' technology in drug discovery

Analytical ultracentrifugation (AUC) is a powerful means of characterizing the solution behavior of molecules. Sedimentation velocity analysis, the preferred AUC technique for characterizing complex systems, has higher resolution, broader applicable range and fewer solute/solvent limitations than gel-permeation chromatography. The technique is simple to perform and should become a mainstay for target identification, target validation, lead optimization, formulation in drug development and QA/QC. Recent studies have used AUC to characterize the binding stoichiometry and binding sites of an anti-tumor agent; of a hemoglobin-stabilizing protein, and of a fibril growth inhibitor, and to assess the causes of protein aggregation. The recent addition of fluorescence to the existing absorbance and interference detectors dramatically extends the flexibility of analytical ultracentrifugation.:

Sedimentation equilibrium analysis of protein interactions with global implicit mass conservation constraints and systematic noise decomposition

Sedimentation equilibrium is a powerful tool for the characterization of protein self-association and heterogeneous protein interactions. Frequently, it is applied in a configuration with relatively long solution columns and with equilibrium profiles being acquired sequentially at several rotor speeds. The present study proposes computational tools, implemented in the software SEDPHAT, for the global analysis of equilibrium data at multiple rotor speeds with multiple concentrations and multiple optical detection methods. The detailed global modeling of such equilibrium data can be a nontrivial computational problem. It was shown previously that mass conservation constraints can significantly improve and extend the analysis of heterogeneous protein interactions. Here, a method for using conservation of mass constraints for the macromolecular redistribution is proposed in which the effective loading concentrations are calculated from the sedimentation equilibrium profiles. The approach is similar to that described by Roark (Biophys. Chem. 5 (1976) 185-196), but its utility is extended by determining the bottom position of the solution columns from the macromolecular redistribution. For analyzing heterogeneous associations at multiple protein concentrations, additional constraints that relate the effective loading concentrations of the different components or their molar ratio in the global analysis are introduced. Equilibrium profiles at multiple rotor speeds also permit the algebraic determination of radial-dependent baseline profiles, which can govern interference optical ultracentrifugation data, but usually also occur, to a smaller extent, in absorbance optical data. Finally, the global analysis of equilibrium profiles at multiple rotor speeds with implicit mass conservation and computation of the bottom of the solution column provides an unbiased scale for determining molar mass distributions of noninteracting species. The properties of these tools are studied with theoretical and experimental data sets.

Structural variation in human apolipoprotein E3 and E4: secondary structure, tertiary structure, and size distribution

Human apolipoprotein E (apoE) is a 299-amino-acid protein with a molecular weight of 34 kDa. The difference between the apoE3 and apoE4 isoforms is a single residue substitution involving a Cys-Arg replacement at residue 112. ApoE4 is positively associated with atherosclerosis and late-onset and sporadic Alzheimer's disease (AD). ApoE4 and its C-terminal truncated fragments have been found in the senile plaques and neurofibrillary tangles in the brain of AD patients. However, detail structural information regarding isoform and domain interaction remains poorly understood. We prepared full-length, N-, and C-terminal truncated apoE3 and apoE4 proteins and studied their structural variation. Sedimentation velocity and continuous size distribution analysis using analytical ultracentrifugation revealed apoE3(72-299) as consisting of a major species with a sedimentation coefficient of 5.9. ApoE4(72-299) showed a wider and more complicated species distribution. Both apoE3 and E4 N-terminal domain (1-191) existed with monomers as the major component together with some tetramer. The oligomerization and aggregation of apoE protein increased when the C-terminal domain (192-271) was incorporated. The structural influence of the C-terminal domain on apoE is to assist self-association with no significant isoform preference. Circular dichroism and fluorescence studies demonstrated that apoE4(72-299) possessed a more alpha-helical structure with more hydrophobic residue exposure. The structural variation of the N-terminal truncated apoE3 and apoE4 protein provides useful information that helps to explain the greater aggregation of the apoE4 isoform and thus has implication for the involvement of apoE4 in AD.

Mechanism of prion propagation: amyloid growth occurs by monomer addition

Abundant nonfibrillar oligomeric intermediates are a common feature of amyloid formation, and these oligomers, rather than the final fibers, have been suggested to be the toxic species in some amyloid diseases. Whether such oligomers are critical intermediates for fiber assembly or form in an alternate, potentially separable pathway, however, remains unclear. Here we study the polymerization of the amyloidogenic yeast prion protein Sup35. Rapid polymerization occurs in the absence of observable intermediates, and both targeted kinetic and direct single-molecule fluorescence measurements indicate that fibers grow by monomer addition. A three-step model (nucleation, monomer addition, and fiber fragmentation) accurately accounts for the distinctive kinetic features of amyloid formation, including weak concentration dependence, acceleration by agitation, and sigmoidal shape of the polymerization time course. Thus, amyloid growth can occur by monomer addition in a reaction distinct from and competitive with formation of potentially toxic oligomeric intermediates.

X-ray structure analysis of a designed oligomeric miniprotein reveals a discrete quaternary architecture

The x-ray crystal structure of an oligomeric miniprotein has been determined to a 1.2-A resolution by means of multiwavelength anomalous diffraction phasing with selenomethionine analogs that retain the biophysical characteristics of the native peptide. Peptide 1, comprising alpha and beta secondary structure elements with only 21 aa per monomer, associates as a discrete tetramer. The peptide adopts a previously uncharacterized quaternary structure in which alpha and beta components interact to form a tightly packed and well defined hydrophobic core. The structure provides insight into the origins of the unusual thermal stability of the oligomer. The miniprotein shares many characteristics of larger proteins, including cooperative folding, lack of 1-anilino-8-naphthalene sulfonate binding, and limited deuterium exchange, and possesses a buried surface area typical of native proteins.