Structures of the native and swollen forms of cowpea chlorotic mottle virus determined by X-ray crystallography and cryo-electron microscopy

Characterization of subunit structural changes accompanying assembly of the bacteriophage P22 procapsid

P22 serves as a model for the assembly and maturation of icosahedral double-stranded DNA viruses. The viral capsid precursor, or procapsid, is assembled from 420 copies of a 47 kDa coat protein subunit (gp5) that is rich in beta-strand secondary structure. Maturation to the capsid, which occurs in vivo upon DNA packaging, is accompanied by shell expansion and a large increase in the level of protection against deuterium exchange of amide NH groups. Accordingly, shell maturation resembles the final step in protein folding, wherein domain packing and an exchange-protected core become more fully developed [Tuma, R., Prevelige, P. E., Jr., and Thomas, G. J., Jr. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 9885-9890]. Here, we exploit recent advances in Raman spectroscopy to investigate the P22 coat protein subunit under conditions which stabilize the monomeric state, viz., in solution at very low concentrations. Under these conditions, the monomer exhibits an elongated shape, as demonstrated by small-angle X-ray scattering. Raman spectra allow the identification of conformation-sensitive marker bands of the monomer, as well as the characterization of NH exchange dynamics for comparison with procapsid and capsid shell assemblies. We show that procapsid assembly involves significant ordering of the predominantly beta-strand backbone. We propose that such ordering may mediate formation of the distinct subunit conformations required for assembly of a T = 7 icosahedral lattice. However, the monomer, like the subunit within the procapsid lattice, exhibits a moderate level of protection against low-temperature NH exchange, indicative of a nascent folding core. The environments and exchange characteristics of key side chains are also similar for the monomeric and procapsid subunits, and distinct from corresponding characteristics of the capsid subunit. The monomer thus represents a compact but metastable folding intermediate along the pathway to assembly of the procapsid and capsid.

The multifunctional capsid proteins of plant RNA viruses

This article summarizes studies of viral coat (capsid) proteins (CPs) of RNA plant viruses. In addition, we discuss and seek to interpret the knowledge accumulated to data. CPs are named for their primary function; to encapsidate viral genomic nucleic acids. However, encapsidation is only one feature of an extremely diverse array of structural, functional, and ecological roles played during viral infection and spread. Herein, we consider the evolution of viral CPs and their multitude of interactions with factors encoded by the virus, host plant, or viral vector (biological transmission agent) that influence the infection and epidemiological facets of plant disease. In addition, applications of today's understanding of CPs in the protection of crops from viral infection and use in the manufacture of valuable compounds are considered.

Mechanism of capsid assembly for an icosahedral plant virus

Capsids of spherical viruses share a common architecture: an icosahedral arrangement of identical proteins. We suggest that there may be a limited number of common assembly mechanisms for such viruses. Previous assembly mechanisms were proposed on the basis of virion structure but were not rigorously tested. Here we apply a rigorous analysis of assembly to cowpea chlorotic mottle virus (CCMV), a typical, small, positive-strand RNA virus. The atomic resolution structure of CCMV revealed an interleaving of subunits around the quasi-sixfold vertices, which suggested that capsid assembly was initiated by a hexamer of dimers (Speir et al., 1995, Structure 3, 63-78). However, we find that the capsid protein readily forms pentamers of dimers in solution, based on polymerization kinetics observed by light scattering. Capsid assembly is nucleated by a pentamer, determined from analysis of the extent of assembly by size-exclusion chromatography. Subsequent assembly likely proceeds by the cooperative addition of dimers, leading to the T = 3 icosahedral capsid. At high protein concentrations, the concentration-dependent nucleation reaction causes an overabundance of five-dimer nuclei that can be identified by classical light scattering. In turn these associate to form incomplete capsids and pseudo-T = 2 capsids, assembled by oligomerization of 12 pentamers of dimers. The experimentally derived assembly mechanisms of T = 3 and pseudo-T = 2 CCMV capsids are directly relevant to interpreting the structure and assembly of other T = 3 viruses such as Norwalk virus and pseudo-T = 2 viruses such as the vp3 core of blue tongue virus.

Cucumber mosaic virus mutants with altered physical properties and defective in aphid vector transmission

Two mutant strains of cucumber mosaic virus (CMV) were investigated with respect to virion stability and molecular determinants of aphid vector transmission. The mutant 2A1-MT-60x, derived from the mechanically passaged wild type 2A1-AT, is poorly transmissible by the aphid Aphis gossypii and not transmissible by the aphid Myzus persicae, whereas the wild type virus is transmissible by both aphid species. The mutant phenotype was shown to be conferred by a single encoded amino acid change of alanine to threonine at position 162 of the coat protein (CP). Modifying the mutant CP gene to encode the wild type sequence (alanine) at position 162 restored aphid transmission. To test for a correspondence between changes in the physical stability of virions and defects in aphid transmission, a urea disruption assay was developed. Virions of aphid-transmissible strains 2A1-AT and CMV-Fny were stable with treatments of up to between 3 and 4 M urea. In this assay mutant viruses 2A1-MT-60x and CMV-M were less stable, as they were completely disrupted at urea concentrations of 2 and 1 M urea, respectively. The mutant 2A1-MT-60x also accumulated at a reduced level in infected squash relative to the wild type virus. These studies suggest that a primary factor in the loss of aphid transmissibility of some strains of CMV is a reduction in virion stability.

Structure of native and expanded sobemoviruses by electron cryo-microscopy and image reconstruction

Rice yellow mottle virus (RYMV) and southern bean mosaic virus, cowpea strain (SCPMV) are members of the Sobemovirus genus of RNA-containing viruses. We used electron cryo-microscopy (cryo-EM) and icosahedral image analysis to examine the native structures of these two viruses at 25 A resolution. Both viruses have a single tightly packed capsid layer with 180 subunits assembled on a T=3 icosahedral lattice. Distinctive crown-like pentamers emanate from the 12 5-fold axes of symmetry. The exterior face of SCPMV displays deep valleys along the 2-fold axes and protrusions at the quasi-3-fold axes. While having a similar topography, the surface of RYMV is comparatively smooth. Two concentric shells of density reside beneath the capsid layer of RYMV and SCPMV, which we interpret as ordered regions of genomic RNA. In the presence of divalent cations, SCPMV particles swell and fracture, whereas the expanded form of RYMV is stable. We previously proposed that the cell-to-cell movement of RYMV in xylem involves chelation of Ca(2+) from pit membranes of infected cells, thereby stabilizing the capsid shells and allowing a pathway for spread of RYMV through destabilized membranes. In the context of this model, we propose that the expanded form of RYMV is an intermediate in the in vivo assembly of virions.

3D domain swapping modulates the stability of members of an icosahedral virus group

BACKGROUND

Rice yellow mottle virus (RYMV) is a major pathogen that dramatically reduces rice production in many African countries. RYMV belongs to the genus sobemovirus, one group of plant viruses with icosahedral capsids and single-stranded, positive-sense RNA genomes.

RESULTS

The structure of RYMV was determined and refined to 2.8 A resolution by X-ray crystallography. The capsid contains 180 copies of the coat protein subunit arranged with T = 3 icosahedral symmetry. Each subunit adopts a jelly-roll beta sandwich fold. The RYMV capsid structure is similar to those of other sobemoviruses. When compared with these viruses, however, the betaA arm of the RYMV C subunit, which is a molecular switch that regulates quasi-equivalent subunit interactions, is swapped with the 2-fold-related betaA arm to a similar, noncovalent bonding environment. This exchange of identical structural elements across a symmetry axis is categorized as 3D domain swapping and produces long-range interactions throughout the icosahedral surface lattice. Biochemical analysis supports the notion that 3D domain swapping increases the stability of RYMV.

CONCLUSIONS

The quasi-equivalent interactions between the RYMV proteins are regulated by the N-terminal ordered residues of the betaA arm, which functions as a molecular switch. Comparative analysis suggests that this molecular switch can also modulate the stability of the viral capsids.

Molecular studies on bromovirus capsid protein. VII. Selective packaging on BMV RNA4 by specific N-terminal arginine residuals

An arginine-rich RNA-binding motif (ARM) found at the N-proximal region of Brome mosaic virus (BMV) coat protein (CP) adopts alpha-helical conformation and shares homology with CPs of plant and insect RNA viruses, HIV-Rev and Tat proteins, bacterial antiterminators, and ribosomal splicing factors. The ARM of BMV CP, consisting of amino acids 9 through 21 with six arginine residues, is essential for RNA binding and subsequent packaging. In this study analysis of the alpha-helical contents of wild-type and mutant peptides by circular dichroism spectra identified protein determinants required for such conformation. Electrophoretic mobility-shift assays between viral RNA and BMV CP peptides with either proline or alanine substitutions revealed that the interaction is nonspecific. Expression in vivo of mature full-length BMV CP subunits, having the same substitutions for each arginine within the ARM, derived from biologically active clones was found to be competent to assemble into infectious virions and cause visible symptom phenotypes in whole plants. However, analysis of virion progeny RNA profiles of CP variants and subsequent in vitro reassembly assays between mutant CP and four BMV RNAs unveiled the ability of arginine residues at positions 10, 13, or 14 of the ARM to confer selective packaging of BMV RNA4. Thus, BMV CP contains determinants that specifically interact with RNA4 to ensure selective packaging.

Refined structure of desmodium yellow mottle tymovirus at 2.7 A resolution

Desmodium yellow mottle virus is a 28 nm diameter, T=3 icosahedral plant virus of the tymovirus group. Its structure has been solved to a resolution of 2.7 A using X-ray diffraction analysis based on molecular replacement and phase extension methods. The final R value was 0.151 (R(free)=0.159) for 134,454 independent reflections. The folding of the polypeptide backbone is nearly identical with that of turnip yellow mosaic virus, as is the arrangement of subunits in the virus capsid. However, a major difference in the disposition of the amino-terminal ends of the subunits was observed. In turnip yellow mosaic virus, those from the B and C subunits comprising the hexameric capsomeres formed an annulus about the interior of the capsomere, while the corresponding N termini of the pentameric capsomere A subunits were not visible at all in electron density maps. In Desmodium yellow mottle tymovirus, amino termini from the A and B subunits combine to form the annuli, thereby resulting in a much strengthened association between the two types of capsomeres and an, apparently, more stable capsid. The first 13 residues of the C subunit were invisible in electron density maps. Two ordered fragments of single-stranded RNA, seven and two nucleotides in length, were observed. The ordered water structure of the virus particle was delineated and required 95 solvent molecules per protein subunit.

The structure of cucumber mosaic virus and comparison to cowpea chlorotic mottle virus

The structure of cucumber mosaic virus (CMV; strain Fny) has been determined to a 3.2-A resolution using X-ray crystallography. Despite the fact that CMV has only 19% capsid protein sequence identity (34% similarity) to cowpea chlorotic mottle virus (CCMV), the core structures of these two members of the Bromoviridae family are highly homologous. As suggested by a previous low-resolution structural study, the 305-A diameter (maximum) of CMV is approximately 12 A larger than that of CCMV. In CCMV, the structures of the A, B, and C subunits are nearly identical except in their N termini. In contrast, the structures of two loops in subunit A of CMV differ from those in B and C. These loops are 6 and 7 residues longer than the analogous regions in CCMV. Unlike that of CCMV, the capsid of CMV does not undergo swelling at pH 7.0 and is stable at pH 9.0. This may be partly due to the fact that the N termini of the B and C subunits form a unique bundle of six amphipathic helices oriented down into the virion core at the threefold axes. In addition, while CCMV has a cluster of aspartic acid residues at the quasi-threefold axis that are proposed to bind metal in a pH-dependent manner, this cluster is replaced by complementing acids and bases in CMV. Finally, this structure clearly demonstrates that the residues important for aphid transmission lie at the outermost portion of the betaH-betaI loop and yields details of the portions of the virus that are hypothesized to mediate binding to aphid mouthparts.

The three-dimensional structure of bacteriophage PP7 from Pseudomonas aeruginosa at 3.7-A resolution

The three-dimensional structure of phage PP7 from Pseudomonas aeruginosa has been determined to 3.7-A resolution. A comparison with distantly related small RNA phages showed that the biggest differences were found in the FG loops, forming the contacts around the fivefold and threefold axes. In contrast to the situation in other phages, the FG loops of phage PP7 are very similar in all three subunits. This supports the hypothesis that no switches are needed for the assembly control in these viruses. Some of the most conserved residues lie within the region involved in RNA binding in the related phages MS2 and seem to have the same function.

Crystal structure of tobacco necrosis virus at 2.25 A resolution

The crystal structure of tobacco necrosis virus (TNV) has been determined by real-space averaging with 5-fold non-crystallographic symmetry, and refined to R=25.3 % for diffraction data to 2.25 A resolution. A total of 180 subunits form a T=3 virus shell with a diameter of about 280 A and a small protrusion at the 5-fold axis. In 276 amino acid residues, the respective amino terminal 86, 87 and 56 residues of the A, B and C subunits are disordered. No density for the RNA was found. The subunits have a "jelly roll" beta-barrel structure, as have the structures of the subunits of other spherical viruses. The tertiary and quaternary structures of TNV are, in particular, similar to those of southern bean mosaic virus, although they are classified in different groups. Invisible residues 1 to 56 with a high level of basic residues are considered to be located inside the particle. Sequence comparison of the coat proteins of several TNV strains showed that the sequences of the disordered segment diverge considerably as compared with those of the ordered segment, consistent with a small tertiary structural constraint being imposed on the N-terminal segment. Basic residues are localized on the subunit interfaces or inner surface of the capsid. Positive charges of the basic residues facing the interior, as well as those of the N-terminal segment, may neutralize the negative charge of the RNA inside. Five calcium ions per icosahedral asymmetric unit are located at the subunit interfaces; three are close to the exterior surface, the other two away from it. The environments of the first three are similar, and those of the other two sites are similar. These calcium ions are assumed to be responsible for the stabilization/transition of the quaternary structure of the shell. Three peptide segments ordered only in the C subunits are clustered around each 3-fold (quasi-6-fold) axis forming a beta-annulus, and may lead to quasi-equivalent interactions for the organization of the T=3 shell.

Large conformational changes in the maturation of a simple RNA virus, nudaurelia capensis omega virus (NomegaV)

An assembly intermediate of a small, non-enveloped RNA virus has been discovered that exhibits striking differences from the mature virion. Virus-like particles (VLPs) of Nudaurelia capensis omega virus (NomegaV), a T=4 icosahedral virus infecting Lepidoptera insects, were produced in insect cells using a baculovirus vector expressing the coat protein. A procapsid form was discovered when NomegaV VLPs were purified at neutral pH conditions. These VLPs were fragile and did not undergo the autoproteolytic maturation that occurs in the infectious virus. Electron cryo-microscopy (cryoEM) and image analysis showed that, compared with the native virion, the VLPs were 16% larger in diameter, more rounded, porous, and contained an additional internal domain. Upon lowering the pH to 5.0, the VLP capsids became structurally indistinguishable from the authentic virion and the subunits autoproteolyzed. The NomegaV protein subunit coordinates, which were previously determined crystallographically, were modelled into the 28 A resolution cryoEM map of the procapsid. The resulting pseudo-atomic model of the NomegaV procapsid demonstrated the large rearrangements in quaternary and tertiary structure needed for the maturation of the VLPs and presumably of the virus. Based on this model, we propose that electrostatically driven rearrangements of interior helical regions are responsible for the large conformational change. These results are surprising because large structural rearrangements have not been found in the maturation of any other small RNA viruses. However, similarities of this conformational change to the maturational processes of more complex DNA viruses (e.g. bacteriophages and herpesvirus) and to the swelling of simple plant viruses suggest that structural changes in icosahedral viruses, which are integral to their function, have similar strategies and perhaps mechanisms.

Molecular studies on bromovirus capsid protein

Specific interactions are likely to occur between the highly conserved N-proximal arginine-rich motif (ARM) of Brome mosaic virus (BMV) coat protein (CP) and each of three genomic RNAs and a single subgenomic RNA during in vivo encapsidation. To characterize these interactions, three independent deletions were engineered into a biologically active clone of BMV RNA3 (B3) such that the matured CP of each B3 variant precisely lacks either the entire ARM (B3/Delta919) or two consecutive arginine residues (B3/13DeltaDelta14 and B3/18DeltaDelta19) within the ARM. Analysis of virion RNA for each B3 variant recovered from symptomatic leaves of Chenopodium quinoa revealed that the interactions between the N-terminal ARM of BMV CP and each of three genomic RNAs is distinct. Northern blot hybridization of B3Delta919 virion RNA revealed that the deleted ARM region specifically affected the stability of virions containing RNA1. An abundant truncated RNA species recurrently found in the virions of B3Delta919 was identified to be a derivative of genomic RNA1, lacking the 5' 943 nucleotides. Additional Northern blot analysis of virion RNAs from B3/Delta919, B3/13DeltaDelta14, and B3/18DeltaDelta19, and in vitro reassembly assays revealed that the N-terminal ARM region contains crucial amino acids required for RNA4 packaging, independent of genomic RNA3. The significance of these observations in relation to Bromovirus CP-RNA interactions during virion assembly is discussed.

Conformational changes preceding decapsidation of bromegrass mosaic virus under hydrostatic pressure: a small-angle neutron scattering study

The stability of bromegrass mosaic virus (BMV) and empty shells reassembled in vitro from purified BMV coat protein was investigated under hydrostatic pressure, using solution small-angle neutron scattering. This technique allowed us to monitor directly the dissociation of the particles, and to detect conformational changes preceding dissociation. Significant dissociation rates were observed only if virions swelled upon increase of pressure, and pressure effects became irreversible at very high-pressure in such conditions. At pH 5.0, in buffers containing 0.5 M NaCl and 5 mM MgCl(2), BMV remained compact (radius 12.9 nm), dissociation was limited to approximately 10 % at 200 MPa, and pressure effects were totally reversible. At pH 5.9, BMV particles were slightly swollen under normal pressure and swelling increased with pressure. The dissociation was reversible to 90 % for pressures up to 160 MPa, where its rate reached 28 %, but became totally irreversible at 200 MPa. Pressure-induced swelling and dissociation increased further at pH 7.3, but were essentially irreversible. The presence of (2)H(2)O in the buffer strongly stabilized BMV against pressure effects at pH 5.9, but not at pH 7.3. Furthermore, the reversible changes of the scattered intensity observed at pH 5.0 and 5.9 provide evidence that pressure could induce the release of coat protein subunits, or small aggregates of these subunits from the virions, and that the dissociated components reassociated again upon return to low pressure. Empty shells were stable at pH 5.0, at pressures up to 260 MPa. They became ill-shaped at high-pressure, however, and precipitated slowly after return to normal conditions, providing the first example of a pressure-induced conformational drift in an assembled system.

Molecular tectonic model of virus structural transitions: the putative cell entry states of poliovirus

Upon interacting with its receptor, poliovirus undergoes conformational changes that are implicated in cell entry, including the externalization of the viral protein VP4 and the N terminus of VP1. We have determined the structures of native virions and of two putative cell entry intermediates, the 135S and 80S particles, at approximately 22-A resolution by cryo-electron microscopy. The 135S and 80S particles are both approximately 4% larger than the virion. Pseudoatomic models were constructed by adjusting the beta-barrel domains of the three capsid proteins VP1, VP2, and VP3 from their known positions in the virion to fit the 135S and 80S reconstructions. Domain movements of up to 9 A were detected, analogous to the shifting of tectonic plates. These movements create gaps between adjacent subunits. The gaps at the sites where VP1, VP2, and VP3 subunits meet are plausible candidates for the emergence of VP4 and the N terminus of VP1. The implications of these observations are discussed for models in which the externalized components form a transmembrane pore through which viral RNA enters the infected cell.

The cognate coat protein is required for cell-to-cell movement of a chimeric brome mosaic virus mediated by the cucumber mosaic virus movement protein

Cucumber mosaic cucumovirus (CMV) and brome mosaic bromovirus (BMV) have many similarities, including the three-dimensional structure of virions, genome organizations, and requirement of the coat protein (CP) for cell-to-cell movement. We have shown that a chimeric BMV with the CMV 3a movement protein (MP) gene instead of its own cannot move from cell to cell in Chenopodium quinoa, a common permissive host for both BMV and CMV. Another chimeric BMV was constructed by replacing both MP and CP genes of BMV with those of CMV (MP/CP-chimera) and tested for its infectivity in C. quinoa, to determine whether the CMV CP has some functions required for the CMV MP-mediated cell-to-cell movement and to exhibit functional difference between CPs of BMV and CMV. Cell-to-cell movement of the MP/CP-chimera occurred, and small local lesions were induced on the inoculated leaves. A frameshift mutation introduced in the CMV CP gene of the MP/CP-chimera resulted in a lack of cell-to-cell movement of the chimeric virus. These results indicate that the viral movement mediated by the CMV MP requires its cognate CP. Deletion of the amino-terminal region in CMV CP, which is not obligatory for CMV movement, also abolished cell-to-cell movement of the MP/CP-chimera. This may suggest some differences in cell-to-cell movement of the MP/CP-chimera and CMV. On the other hand, the sole replacement of BMV CP gene with that of CMV abolished viral cell-to-cell movement, suggesting a possibility that the viral movement mediated by the BMV MP may also require its cognate CP. Functional compatibility between MP and CP in viral cell-to-cell movement is discussed.

The refined crystal structure of cowpea mosaic virus at 2.8 A resolution

Comoviruses are a group of plant viruses in the picornavirus superfamily. The type member of comoviruses, cowpea mosaic virus (CPMV), was crystallized in the cubic space group I23, a = 317 A and the hexagonal space group P6(1)22, a = 451 A, c = 1038 A. Structures of three closely similar nucleoprotein particles were determined in the cubic form. The roughly 300-A capsid was similar to the picornavirus capsid displaying a pseudo T = 3 (P = 3) surface lattice. The three beta-sandwich domains adopt two orientations, one with the long axis radial and the other two with the long axes tangential in reference to the capsid sphere. T = 3 viruses display one or the other of these two orientations. The CPMV capsid was permeable to cesium ions, leading to a disturbance of the beta-annulus inside a channel-like structure, suggesting an ion channel. The hexagonal crystal form diffracted X rays to 3 A resolution, despite the large unit cell. The large ( approximately 200 A) solvent channels in the lattice allow exchange of CPMV cognate Fab fragments. As an initial step in the structure determination of the CPMV/Fab complex, the P6(1)22 crystal structure was solved by molecular replacement with the CPMV model determined in the cubic cell.

Recombinant hepatitis E capsid protein self-assembles into a dual-domain T = 1 particle presenting native virus epitopes

The three-dimensional structure of a self-assembled, recombinant hepatitis E virus particle has been solved to 22-A resolution by cryo-electron microscopy and three-dimensional image reconstruction. The single subunit of 50 kDa is derived from a truncated version of the open reading frame-2 gene of the virus expressed in a baculovirus system. This is the first structure of a T = 1 particle with protruding dimers at the icosahedral two-fold axes solved by cryo-electron microscopy. The protein shell of these hollow particles extends from a radius of 50 A outward to a radius of 135 A. In the reconstruction, the capsid is dominated by dimers that define the 30 morphological units. The outer domain of the homodimer forms a protrusion, which corresponds to the spike-like density seen in the cryo-electron micrograph. This particle retains native virus epitopes, suggesting its potential value as a vaccine.

Adding the third dimension to virus life cycles: three-dimensional reconstruction of icosahedral viruses from cryo-electron micrographs

Viruses are cellular parasites. The linkage between viral and host functions makes the study of a viral life cycle an important key to cellular functions. A deeper understanding of many aspects of viral life cycles has emerged from coordinated molecular and structural studies carried out with a wide range of viral pathogens. Structural studies of viruses by means of cryo-electron microscopy and three-dimensional image reconstruction methods have grown explosively in the last decade. Here we review the use of cryo-electron microscopy for the determination of the structures of a number of icosahedral viruses. These studies span more than 20 virus families. Representative examples illustrate the use of moderate- to low-resolution (7- to 35-A) structural analyses to illuminate functional aspects of viral life cycles including host recognition, viral attachment, entry, genome release, viral transcription, translation, proassembly, maturation, release, and transmission, as well as mechanisms of host defense. The success of cryo-electron microscopy in combination with three-dimensional image reconstruction for icosahedral viruses provides a firm foundation for future explorations of more-complex viral pathogens, including the vast number that are nonspherical or nonsymmetrical.

RNA-controlled polymorphism in the in vivo assembly of 180-subunit and 120-subunit virions from a single capsid protein

Repeated, specific interactions between capsid protein (CP) subunits direct virus capsid assembly and exemplify regulated protein-protein interactions. The results presented here reveal a striking in vivo switch in CP assembly. Using cryoelectron microscopy, three-dimensional image reconstruction, and molecular modeling, we show that brome mosaic virus (BMV) CP can assemble in vivo two remarkably distinct capsids that selectively package BMV-derived RNAs in the absence of BMV RNA replication: a 180-subunit capsid indistinguishable from virions produced in natural infections and a previously unobserved BMV capsid type with 120 subunits arranged as 60 CP dimers. Each such dimer contains two CPs in distinct, nonequivalent environments, in contrast to the quasi-equivalent CP environments throughout the 180-subunit capsid. This 120-subunit capsid utilizes most of the CP interactions of the 180-subunit capsid plus nonequivalent CP-CP interactions. Thus, the CP of BMV, and perhaps other viruses, can encode CP-CP interactions that are not apparent from mature virions and may function in assembly or disassembly. Shared structural features suggest that the 120- and 180-subunit capsids share assembly steps and that a common pentamer of CP dimers may be an important assembly intermediate. The ability of a single CP to switch between distinct capsids by means of alternate interactions also implies reduced evolutionary barriers between different capsid structures. The in vivo switch between alternate BMV capsids is controlled by the RNA packaged: a natural BMV genomic RNA was packaged in 180-subunit capsids, whereas an engineered mRNA containing only the BMV CP gene was packaged in 120-subunit capsids. RNA features can thus direct the assembly of a ribonucleoprotein complex between alternate structural pathways.

Assembly dynamics of the nucleocapsid shell subunit (P8) of bacteriophage phi6

Phi6 is an enveloped dsRNA bacteriophage of Pseudomonas syringae. The viral envelope encloses a nucleocapsid, consisting of an RNA-dependent RNA polymerase complex within an icosahedral shell assembled from approximately 800 copies of a 16 kDa subunit (protein P8, encoded by viral gene 8). During infection, the nucleocapsid penetrates the host plasma membrane and enters the cytosol, whereupon the P8 shell disassembles and the polymerase complex is activated. To understand the molecular mechanisms of shell assembly and disassembly-processes that have counterparts in most viral infections-we have investigated the structure, stability, and dynamics of P8 in different assembly states using time-resolved Raman spectroscopy and hydrogen-isotope exchange. In the presence of Ca(2+), which promotes shell assembly, the highly alpha-helical conformation of the P8 subunit is stabilized by rapid assembly into shell-like structures. However, in the absence of Ca(2+), the P8 subunit is thermolabile and unstable, manifested by a slow alpha-helix --> beta-strand conformational change and the accumulation of aberrant aggregates. In both properly assembled shells and aberrant aggregates, the P8 subunit retains an alpha-helical core that is protected against deuterium exchange of amide NH groups. Surprisingly, no additional protection against amide exchange is conferred by the shell lattice. Time-resolved assembly and disassembly experiments in deuterated buffers indicate that the regions of P8 involved in subunit/subunit interactions in the intact shell undergo rapid exchanges, presumably due to local unfolding events that are characterized by low activation barriers. Such localized dynamics of P8 within the shell lattice may mediate the nucleocapsid/host membrane interactions that are required in the cytosol for particle assembly during maturation and disassembly during infection.

Polymorphism of turnip yellow mosaic virus empty shells and evidence for conformational changes occurring after release of the viral RNA. A differential scanning calorimetric study

Turnip yellow mosaic virus (TYMV) is a small isometric plant virus which decapsidates by releasing its RNA through a hole in the capsid, leaving behind an empty shell [R. E. F. Matthews and J. Witz, (1985) Virology 144, 318-327]. Similar empty shells (artificial top component, ATC) can be obtained by submitting the virions to various treatments in vitro. We have used differential scanning calorimetry, analytical sedimentation, and electron microscopy to investigate the thermodenaturation of natural empty shells (NTC, natural top component) present in purified virus suspensions, and of several types of ATCs. ATCs divided in two major classes. Those obtained by alkaline titration, by the action of urea or butanol behaved as NTC: their thermograms contained only one peak corresponding to the irreversible dissociation of the shells and the denaturation of the coat protein. The temperature of this unique transition varied significantly with pH, from 71 degrees C at pH 4.5 to 84 degrees C at pH 8.5. The thermograms of ATCs obtained by freezing and thawing, or by the action of high pressure, contained two peaks: shells dissociated first into smaller protein aggregates at 57 degrees C (at pH 5.0) to 61 degrees C (at pH 8.5), which denatured at the temperature of the unique transition of NTC. Shells obtained by heating virions to 55 degrees C at pH 7.6, changed conformation after the release of the viral RNA, as upon continuous heating to 95 degrees C, their thermograms were similar to those of the shells obtained by freezing and thawing, whereas after purification they behaved like NTC. Structural implications of these observations are discussed.

Effect of C-terminal mutations of alfalfa mosaic virus coat protein on dimer formation and assembly in vitro

The coat protein (CP) of alfalfa mosaic virus (AMV) strain 425 assembles to bacilliform or rod-shaped particles in the presence of nucleic acids or to T = 1 empty icosahedral particles in the absence of nucleic acids. To study the determinants of CP assembly, recombinant CPs (rCPs) that contained a (His)(6) region were expressed in Escherichia coli. Wt rCP and a mutant rCP, which lacked the last nine amino acids of the C terminus (amino acids 213-221), assembled to particles that were identical in electron micrographs. However, a mutant rCP, which lacked the last 18 amino acids of the C terminus (amino acids 204-221), did not assemble. Likewise, a mutant with alanine substitutions at W(191), F(197), and P(198) did not assemble. Furthermore rCP with a single alanine substitution at W(191) did not assemble, whereas the rCP, which had an arginine and an alanine substitution at A(196) and F(197), respectively, formed rod-shaped particles. The mutations that prevented assembly prevented dimer formation, which indicates that dimers are the minimal building blocks of particles. Our results indicate that two separate regions in the C terminus of AMV CP are critical for dimer formation and assembly and that changes in key amino acids in one of the regions affect both assembly and particle morphology.

In vitro assembly of alphavirus cores by using nucleocapsid protein expressed in Escherichia coli

The production of the alphavirus virion is a multistep event requiring the assembly of the nucleocapsid core in the cytoplasm and the maturation of the glycoproteins in the endoplasmic reticulum and the Golgi apparatus. These components associate during the budding process to produce the mature virion. The nucleocapsid proteins of Sindbis virus and Ross River virus have been produced in a T7-based Escherichia coli expression system and purified. In the presence of single-stranded but not double-stranded nucleic acid, the proteins oligomerize in vitro into core-like particles which resemble the native viral nucleocapsid cores. Despite their similarities, Sindbis virus and Ross River virus capsid proteins do not form mixed core-like particles. Truncated forms of the Sindbis capsid protein were used to establish amino acid requirements for assembly. A capsid protein starting at residue 19 [CP(19-264)] was fully competent for in vitro assembly, whereas proteins with further N-terminal truncations could not support assembly. However, a capsid protein starting at residue 32 or 81 was able to incorporate into particles in the presence of CP(19-264) or could inhibit assembly if its molar ratio relative to CP(19-264) was greater than 1:1. This system provides a basis for the molecular dissection of alphavirus core assembly.

Three-dimensional structure of physalis mottle virus: implications for the viral assembly

The structure of the T=3 single stranded RNA tymovirus, physalis mottle virus (PhMV), has been determined to 3.8 A resolution. PhMV crystals belong to the rhombohedral space group R 3, with one icosahedral particle in the unit cell leading to 20-fold non-crystallographic redundancy. Polyalanine coordinates of the related turnip yellow mosaic virus (TYMV) with which PhMV coat protein shares 32 % amino acid sequence identity were used for obtaining the initial phases. Extensive phase refinement by real space molecular replacement density averaging resulted in an electron density map that revealed density for most of the side-chains and for the 17 residues ordered in PhMV, but not seen in TYMV, at the N terminus of the A subunits. The core secondary and tertiary structures of the subunits have a topology consistent with the capsid proteins of other T=3 plant viruses. The N-terminal arms of the A subunits, which constitute 12 pentamers at the icosahedral 5-fold axes, have a conformation very different from the conformations observed in B and C subunits that constitute hexameric capsomers with near 6-fold symmetry at the icosahedral 3-fold axes. An analysis of the interfacial contacts between protein subunits indicates that the hexamers are held more strongly than pentamers and hexamer-hexamer contacts are more extensive than pentamer-hexamer contacts. These observations suggest a plausible mechanism for the formation of empty capsids, which might be initiated by a change in the conformation of the N-terminal arm of the A subunits. The structure also provides insights into immunological and mutagenesis results. Comparison of PhMV with the sobemovirus, sesbania mosaic virus reveals striking similarities in the overall tertiary fold of the coat protein although the capsid morphologies of these two viruses are very different.

Low-resolution density maps from atomic models: how stepping "back" can be a step "forward"

Atomic-resolution structures have had a tremendous impact on modern biological science. Much useful information also has been gleaned by merging and correlating atomic-resolution structural details with lower-resolution (15-40 A), three-dimensional (3D) reconstructions computed from images recorded with cryo-transmission electron microscopy (cryoTEM) procedures. One way to merge these structures involves reducing the resolution of an atomic model to a level comparable to a cryoTEM reconstruction. A low-resolution density map can be derived from an atomic-resolution structure by retrieving a set of atomic coordinates editing the coordinate file, computing structure factors from the model coordinates, and computing the inverse Fourier transform of the structure factors. This method is a useful tool for structural studies primarily in combination with 3D cryoTEM reconstructions. It has been used to assess the quality of 3D reconstructions, to determine corrections for the phase-contrast transfer function of the transmission electron microscope, to calibrate the dimensions and handedness of 3D reconstructions, to produce difference maps, to model features in macromolecules or macromolecular complexes, and to generate models to initiate model-based determination of particle orientation and origin parameters for 3D reconstruction.

Molecular studies on bromovirus capsid protein

Brome mosaic bromovirus (BMV) and cucumber mosaic cucumovirus (CMV) are structurally and genetically very similar. The specificity of the BMV and CMV coat proteins (CPs) during in vivo encapsidation was studied using two RNA3 chimera in which the respective CP genes were exchanged. The replicative competence of each chimera was analyzed in Nicotiana benthamiana protoplasts, and their ability to cause infections was examined in two common permissive hosts, Chenopodium quinoa and N. benthamiana. Each RNA3 chimera replicated to near wild-type (wt) levels and synthesized CPs of expected parental origin when co-inoculated with their respective genomic wt RNAs 1 and 2. However, inoculum containing each chimera was noninfectious in the common permissive hosts tested. Encapsidation assays in N. benthamiana protoplasts revealed that CMV CP expressed from chimeric BMV RNA3 was capable of packaging heterologous BMV RNA, however, at a lower efficiency than parental BMV CP. By contrast, BMV CP expressed from chimeric CMV RNA3 was unable to package heterologous CMV RNA. These observations demonstrate that BMV CP, but not CMV CP, exhibits a high degree of specificity during in vivo packaging. The reasons for the noninfectious nature of each chimera in the host plants tested and factors likely to affect encapsidation in vivo are discussed.

Structure of phage fr capsids with a deletion in the FG loop: implications for viral assembly

The loop between beta-strands F and G in the coat protein of small RNA bacteriophages forms the interactions at the fivefold and threefold (quasi-sixfold) icosahedral axes. In many cases, mutations in this region renders the coat protein unable to form capsids. This FG loop has therefore been suggested to be of major importance for the virus assembly process by guiding the assembly and helping to define the correct curvature of the virus shell. We have determined the crystal structure of a phage fr capsid where the coat protein has a four-residue deletion in the FG loop. This mutant retains the ability to form virus capsids of normal size but has a significantly lower temperature stability than the wild type. The structure reveals that the mutated loops are flexible and too short to interact with each other. This seems incompatible with a role of the FG loop in the regulation of capsid size.

Protein chainmail: catenated protein in viral capsids

The capsid shells of bacteriophage HK97 and several other phages contain polypeptides that are covalently linked into complexes so large that they do not enter polyacrylamide gels after denaturation. The enormous apparent size of these protein complexes in HK97 derives from a novel protein topology. HK97 subunits cross-link via isopeptide bonds into oligomers that are closed rings of five or six members. However, polypeptides from neighboring pentamer and hexamer rings intertwine before the covalent cross-links form. As a result, adjacent protein rings catenate into a network similar to chainmail armor. In vitro linking and unlinking experiments provide strong support for the chainmail model, which explains the unusual properties of these bacteriophages and may apply to other macromolecular structures.

Characterization of cucumber mosaic virus. V. Cell-to-cell movement requires capsid protein but not virions

To ascertain the importance of amino-terminal proximal capsid protein (CP) sequences in cel-to-cell movement, virion formation, and stabilization, two CP mutants of cucumber mosaic virus (CMV) were generated by deletion of sequences encoding CP amino acids 15-40 (delta Sal-Nru) or 26-40 (delta Sac-Nru). Wildtype CMV and CMV containing delta Sac-Nru could infect systemically four host species, although symptoms induced by the two viruses usually were different CMV containing delta Sal-Nru could only infect Nicotiana benthamiana and N. clevelandii systemically, but only slowly, suggesting phloem-independent long-distance movement. A variant mutant designated delta Sal-Nru* could systemically infect N. tabacum as well as the above two Nicotiana species, rapidly, but could not systemically infect Cucurbita pepo. Virus particles could not be detected in plants infected by delta Sal-Nru, while delta Sal-Nru* and delta Sac-Nru formed particles of lower stabilities than for wildtype virus. The CPs of delta Sal-Nru and delta Sal-Nru* could bind RNA in vitro, although less strongly than delta Sac-Nru or wildtype CMV. These data indicate that amino-terminal proximal sequences of the CMV CP interact with viral RNA and are required for the formation of stable virions. Moreover, while the CP is necessary for cell-to-cell movement, the ability to form virions is not a prerequisite for cell-to-cell movement.

Particle polymorphism caused by deletion of a peptide molecular switch in a quasiequivalent icosahedral virus

The capsid of flock house virus is composed of 180 copies of a single type of coat protein which forms a T=3 icosahedral shell. High-resolution structural analysis has shown that the protein subunits, although chemically identical, form different contacts across the twofold axes of the virus particle. Subunits that are related by icosahedral twofold symmetry form flat contacts, whereas subunits that are related by quasi-twofold symmetry form bent contacts. The flat contacts are due to the presence of ordered genomic RNA and an ordered peptide arm which is inserted in the groove between the subunits and prevents them from forming the dihedral angle observed at the bent quasi-twofold contacts. We hypothesized that by deleting the residues that constitute the ordered peptide arm, formation of flat contacts should be impossible and therefore result in assembly of particles with only bent contacts. Such particles would have T=1 symmetry. To test this hypothesis we generated two deletion mutants in which either 50 or 31 residues were eliminated from the N terminus of the coat protein. We found that in the absence of residues 1 to 50, assembly was completely inhibited, presumably because the mutation removed a cluster of positively charged amino acids required for neutralization of encapsidated RNA. When the deletion was restricted to residues 1 to 31, assembly occurred, but the products were highly heterogeneous. Small bacilliform-like structures and irregular structures as well as wild-type-like T=3 particles were detected. The anticipated T=1 particles, on the other hand, were not observed. We conclude that residues 20 to 30 are not critical for formation of flat protein contacts and formation of T=3 particles. However, the N terminus of the coat protein appears to play an essential role in regulating assembly such that only one product, T=3 particles, is synthesized.

Interactive modeling of supramolecular assemblies

The modeling of supramolecular structure presents two major challenges: (1) managing the large amount of sequence, structural and biochemical data, and (2) presenting the data to the user in a flexible and comprehensible manner that addresses these problems. We describe a visualization environment for the creation and analysis of supramolecular models. A set of modular symmetry tools, collectively called SymGen, has been created, providing a flexible platform for the creation of complex assemblies, with interactive control of all symmetry elements and their parameters. A second tool, SymSearch, allows a range of parameters defined within SymGen to be sampled and the resulting conformations to be evaluated. The environment avoids information overload, caused by the large number of atoms in supramolecular complexes, by using a multiresolution spherical harmonic representation that allows the user to display only essential features. Spherical harmonics also enables control of the triangulation level, allowing the user to reduce the complexity of the geometric description to retain interactive speed. The visual fidelity of the surface data is retained by using texture maps that are independent of the resolution of the underlying triangulation. We describe the design and implementation of this environment, and three illustrative examples of its utility.

Comparison of the native CCMV virion with in vitro assembled CCMV virions by cryoelectron microscopy and image reconstruction

Cryoelectron microscopy and three-dimensional image reconstruction analysis has been used to determine the structure of native and in vitro assembled cowpea chlorotic mottle virus (CCMV) virions and capsids to 25-A resolution. Purified CCMV coat protein was used in conjunction with in vitro transcribed viral RNAs to assemble RNA 1 only, RNA 2 only, RNA 3/4 only, and empty (RNA lacking) virions. The image reconstructions demonstrate that the in vitro assembled CCMV virions are morphologically indistinguishable from native virions purified from infected plants. The viral RNA (vRNA) is packaged similarly within the different types of virions. The centers of all assembled particles are generally devoid of density and the vRNA packs against the interior surface of the virion shell. The vRNA appears to adopt an ordered conformation at each of the quasi-threefold axes.

Intercapsomeric disulfide bonds in papillomavirus assembly and disassembly

In order to analyze bonding contacts that stabilize the virion or promote capsid assembly, bovine papillomavirus (BPV) virions were subjected to buffer conditions known to disrupt polyomavirus virions. At physiologic ionic strength, incubation with dithiothreitol (DTT), EGTA, or DTT plus EGTA did not disrupt BPV virions as determined by electron microscopy. However, incubation of virions with DTT rendered the BPV L1 protein susceptible to trypsin cleavage at its carboxy terminus and rendered the genome susceptible to digestion with DNase I. When DTT-treated BPV virions were analyzed by analytical ultracentrifugation, they sedimented at 230S compared with 273S for untreated virions, suggesting a capsid shell expansion. Incubation with EGTA had no effect on trypsin or DNase I sensitivity and only a small effect upon the virion S value. A single cysteine residue conserved among BPV and human papillomavirus (HPV) L1 proteins resides within the trypsin-sensitive carboxy terminus of L1, which is required for capsid assembly. A recombinant HPV type 11 L1 protein, which was purified after expression in Escherichia coli and which has a Cys-to-Gly change at this position (Cys424), formed pentamers; however, unlike the wild-type protein, these mutant pentamers could no longer assemble in vitro into capsid-like structures. These results indicate an important role for interpentamer disulfide bonds in papillomavirus capsid assembly and disassembly and suggest a mechanism of virus uncoating in the reducing environment of the cytoplasm.

Structural analysis of the Spiroplasma virus, SpV4: implications for evolutionary variation to obtain host diversity among the Microviridae

BACKGROUND

Spiroplasma virus, SpV4, is a small, non-enveloped virus that infects the helical mollicute Spiroplasma melliferum. SpV4 exhibits several similarities to the Chlamydia phage, Chp1, and the Coliphages alpha 3, phi K, G4 and phi X174. All of these viruses are members of the Microviridae. These viruses have isometric capsids with T = 1 icosahedral symmetry, cause lytic infections and are the only icosahedral phages that contain single-stranded circular DNA genomes. The aim of this comparative study on these phages was to understand the role of their capsid proteins during host receptor recognition.

RESULTS

The three-dimensional structure of SpV4 was determined to 27 A resolution from images of frozen-hydrated particles. Cryo-electron microscopy (cryo-EM) revealed 20, approximately 54 A long, 'mushroom-like' protrusions on the surface of the capsid. Each protrusion comprises a trimeric structure that extends radially along the threefold icosahedral axes of the capsid. A 71 amino acid portion of VP1 (the SpV4 capsid protein) was shown, by structural alignment with the atomic structure of the F capsid protein of phi X174, to represent an insertion sequence between the E and F strands of the eight-stranded antiparallel beta-barrel. Secondary structure prediction of this insertion sequence provided the basis for a probable structural motif, consisting of a six-stranded antiparallel beta sheet connected by small turns. Three such motifs form the rigid stable trimeric structures (mushroom-like protrusions) at the threefold axes, with hydrophobic depressions at their distal surface.

CONCLUSIONS

Sequence alignment and structural analysis indicate that distinct genera of the Microviridae might have evolved from a common primordial ancestor, with capsid surface variations, such as the SpV4 protrusions, resulting from gene fusion events that have enabled diverse host ranges. The hydrophobic nature of the cavity at the distal surface of the SpV4 protrusions suggests that this region may function as the receptor-recognition site during host infection.

3-D image reconstruction from averaged Fourier transform magnitude by parameter estimation

An object model and estimation procedure for three-dimensional (3-D) reconstruction of objects from measurements of the spherically averaged Fourier transform magnitudes is described. The motivating application is the 3-D reconstruction of viruses based on solution X-ray scattering data. The object model includes symmetry, positivity and support constraints and has the form of a truncated orthonormal expansion and the parameters are estimated by maximum likelihood methods. Successful 3-D reconstructions based on synthetic and experimental measurements from Cowpea mosaic virus are described.

Energetics of quasiequivalence: computational analysis of protein-protein interactions in icosahedral viruses

Quaternary structure polymorphism found in quasiequivalent virus capsids provides a static framework for studying the dynamics of protein interactions. The same protein subunits are found in different structural environments within these particles, and in some cases, the molecular switching required for the polymorphic quaternary interactions is obvious from high-resolution crystallographic studies. Employing atomic resolution structures, molecular mechanics, and continuum electrostatic methods, we have computed association energies for unique subunit interfaces of three icosahedral viruses, black beetle virus, southern bean virus, and human rhinovirus 14. To quantify the chemical determinants of quasiequivalence, the energetic contributions of individual residues forming quasiequivalent interfaces were calculated and compared. The potential significance of the differences in stabilities at quasiequivalent interfaces was then explored with the combinatorial assembly approach. The analysis shows that the unique association energies computed for each virus serve as a sensitive basis set that may determine distinct intermediates and pathways of virus capsid assembly. The pathways for the quasiequivalent viruses displayed isoenergetic oligomers at specific points, suggesting that these may determine the quaternary structure polymorphism required for the assembly of a quasiequivalent particle.

Molecular studies on bromovirus capsid protein. IV. Coat protein exchanges between brome mosaic and cowpea chlorotic mottle viruses exhibit neutral effects in heterologous hosts

Two members of the bromovirus group, brome mosaic virus (BMV) and cowpea chlorotic mottle virus (CCMV), selectively infect barley and cowpea, respectively, and also differ in their ability to systemically infect a common permissive host, Chenopodium quinoa. CCMV is confined to inoculated leaves of C. quinoa, whereas BMV causes rapid systemic mottling. To examine whether host-specific determinants for systemic movement of BMV and CCMV in each of these hosts are localized in the coat protein (CP), sequences encoding this gene were exchanged between biologically active clones of BMV RNA3 (B3) and CCMV RNA3 (C3) to create chimera expressing heterologous CP genes (B3/CCP and C3/BCP). Inoculation of each chimera with its respective wild-type (wt) RNAs 1 and 2 to barley or cowpea or C. quinoa plants resulted in symptom phenotype and long distance movement characteristics similar to those of the parental virus donating RNAs 1 and 2. These observations suggest that neither BMV CP nor CCMV CP has host-specific determinants for long distance movement. Inoculation of additional recombinant viruses, constructed by reassorting wt genomic RNAs 1 and 2 of BMV and CCMV with either heterologous wt RNA3 (i.e., B1 + B2 + C3 and C1 + C2 + B3) or heterologous chimeric RNA3 (i.e., B1 + B2 + C3/BCP and C1 + C2 + B3/CCP), to susceptible hosts resulted only in localized infections. The significance of these observations in relation to bromovirus movement is discussed.

Partially folded states of the capsid protein of cowpea severe mosaic virus in the disassembly pathway

The different partially folded states of the capsid protein that appear in the disassembly pathway of cowpea severe mosaic virus (CPSMV) were investigated by examining the effects of hydrostatic pressure, sub-zero temperatures and urea. The conformational states of the coat protein were analyzed by their intrinsic fluorescence, binding of bis(8-anilinonaphthalene-1-sulfonate) (bis-ANS) and susceptibility to trypsin digestion. CPSMV could be disassembled by pressure at 2.5 kbar. Intrinsic fluorescence and hydrodynamic measurements showed that pressure-induced dissociation was completely reversible. Virus pressurization in the presence of ribonuclease revealed that viral RNA was not exposed, since it was not digested by the enzyme, suggesting the maintenance of protein-nucleic acid interactions under pressure. When the temperature was decreased to -10 degrees C under pressure, CPSMV disassembly became an irreversible process and in this condition, viral RNA was completely digested by ribonuclease. These results suggest a relationship between protein-RNA interactions and CPSMV assembly. Bis-ANS binding and trypsin digestion of coat proteins revealed that they assume a different conformation when they are denatured by low temperatures under pressure or than when they are denatured by urea at atmospheric pressure. The results indicate that the coat proteins can exist in at least four states: (1) The native conformation in the virus capsid; (2) bound to RNA when the virus is dissociated by pressure at room temperature, assuming a conformation that retains the information for reassembly; (3) free subunits in a molten-globule conformation when the virus is dissociated by low temperature under pressure; and (4) free subunits completely unfolded by high concentrations of urea.

IRIS explorer software for radial-depth cueing reovirus particles and other macromolecular structures determined by cryoelectron microscopy and image reconstruction

Structures of biological macromolecules determined by transmission cryoelectron microscopy (cryo-TEM) and three-dimensional image reconstruction are often displayed as surface-shaded representations with depth cueing along the viewed direction (Z cueing). Depth cueing to indicate distance from the center of virus particles (radial-depth cueing, or R cueing) has also been used. We have found that a style of R cueing in which color is applied in smooth or discontinuous gradients using the IRIS Explorer software is an informative technique for displaying the structures of virus particles solved by cryo-TEM and image reconstruction. To develop and test these methods, we used existing cryo-TEM reconstructions of mammalian reovirus particles. The newly applied visualization techniques allowed us to discern several new structural features, including sites in the inner capsid through which the viral mRNAs may be extruded after they are synthesized by the reovirus transcriptase complexes. To demonstrate the broad utility of the methods, we also applied them to cryo-TEM reconstructions of human rhinovirus, native and swollen forms of cowpea chlorotic mottle virus, truncated core of pyruvate dehydrogenase complex from Saccharomyces cerevisiae, and flagellar filament of Salmonella typhimurium. We conclude that R cueing with color gradients is a useful tool for displaying virus particles and other macromolecules analyzed by cryo-TEM and image reconstruction.

Structure of Sesbania mosaic virus at 3 A resolution

Sesbania mosaic virus (SMV) is an isometric, ss-RNA plant virus found infecting Sesbania grandiflora plants in fields near Tirupathi, South India. The virus particles, which sediment at 116 S at pH 5.5, swell upon treatment with EDTA at pH 7.5 resulting in the reduction of the sedimentation coefficient to 108 S. SMV coat protein amino acid sequence was determined and found to have approximately 60% amino acid sequence identity with that of southern bean mosaic virus (SBMV). The amino terminal 60 residue segment, which contains a number of positively charged residues, is less well conserved between SMV and SBMV when compared to the rest of the sequence. The 3D structure of SMV was determined at 3.0 A resolution by molecular replacement techniques using SBMV structure as the initial phasing model. The icosahedral asymmetric unit was found to contain four calcium ions occurring in inter subunit interfaces and three protein subunits, designated A, B and C. The conformation of the C subunit appears to be different from those of A and B in several segments of the polypeptide. These observations coupled with structural studies on SMV partially depleted of calcium suggest a plausible mechanism for the initiation of the disassembly of the virus capsid.

The structure of alfalfa mosaic virus capsid protein assembled as a T=1 icosahedral particle at 4.0-A resolution

K. Fukuyama, S. S. Abdel-Meguid, J. E. Johnson, and M. G. Rossmann (J. Mol. Biol. 167:873-984, 1983) reported the structure of alfalfa mosaic virus assembled from the capsid protein as a T=1 icosahedral empty particle at 4.5-A resolution. The information contained in the structure included the particle size, protein shell thickness, presence of wide holes at the icosahedral fivefold axes, and a proposal that the capsid protein adopts a beta-barrel structure. In the present work, the X-ray diffraction data of Fukuyama et al. as well as the data subsequently collected by I. Fita, Y. Hata, and M. G. Rossmann (unpublished) were reprocessed to 4.0-A resolution, and the structure was solved by molecular replacement. The current structure allowed the tracing of the polypeptide chain of the capsid protein confirming the beta-sandwich fold and provides information on intersubunit interactions in the particle. However, it was not possible to definitively assign the amino acid sequence to the side chain density at 4-A resolution. The particle structure was also determined by cryoelectron microscopy and image reconstruction methods and found to be in excellent agreement with the X-ray model.

Structure of poliovirus type 2 Lansing complexed with antiviral agent SCH48973: comparison of the structural and biological properties of three poliovirus serotypes

BACKGROUND

Polioviruses are human pathogens and the causative agents of poliomyelitis. Polioviruses are icosahedral single-stranded RNA viruses, which belong to the picornavirus family, and occur as three distinct serotypes. All three serotypes of poliovirus can infect primates, but only type 2 can infect mice. The crystal structures of a type 1 and a type 3 poliovirus are already known. Structural studies of poliovirus type 2 Lansing (PV2L) were initiated to try to enhance our understanding of the differences in host range specificity, antigenicity and receptor binding among the three serotypes of poliovirus.

RESULTS

The crystal structure of the mouse neurovirulent PV2L complexed with a potent antiviral agent, SCH48973, was determined at 2.9 A resolution. Structural differences among the three poliovirus serotypes occur primarily in the loop regions of the viral coat proteins (VPs), most notably in the loops of VP1 that cluster near the fivefold axes of the capsid, where the BC loop of PV2L is disordered. Unlike other known structures of enteroviruses, the entire polypeptide chain of PV2L VP4 is visible in the electron density and RNA bases are observed stacking with conserved aromatic residues (Tyr4020 and Phe4046) of VP4. The broad-spectrum antiviral agent SCH48973 is observed binding in a pocket within the beta-barrel of VP1, in approximately the same location that natural 'pocket factors' bind to polioviruses. SCH48973 forms predominantly hydrophobic interactions with the pocket residues.

CONCLUSIONS

Some of the conformational changes required for infectivity and involved in the control of capsid stability and neurovirulence in mice may occur in the vicinity of the fivefold axis of the poliovirus, where there are significant structural differences among the three poliovirus serotypes in the surface exposed loops of VP1 (BC, DE, and HI). A surface depression is located at the fivefold axis of PV2L that is not present in the other two poliovirus serotypes. The observed interaction of RNA with VP4 supports the observation that loss of VP4 ultimately leads to the loss of viral RNA. A model is proposed that suggests dual involvement of the virion fivefold and pseudo-threefold axes in receptor-mediated initiation of infection by picornaviruses.

Quasi-equivalent viruses: a paradigm for protein assemblies

The structure and assembly of icosahedral virus capsids composed of one or more gene products and displaying quasi-equivalent subunit associations are discussed at three levels. The principles of quasi-equivalence and the related geodesic dome formation are first discussed conceptually and the geometric basis for their construction from two-dimensional assembly units is reviewed. The consequences for such an assembly when three-dimensional protein subunits are the associating components are then discussed with the coordinates of cowpea chlorotic mottle virus (CCMV) used to generate hypothetical structures in approximate agreement with the conceptual models presented in the first section. Biophysical, molecular genetic, and atomic structural data for CCMV are then reviewed, related to each other, and incorporated into an assembly model for CCMV that is discussed with respect to the modular, chemical nature of the viral subunit structure. The concepts of quasi-equivalence are then examined in some larger virus structures containing multiple subunit types and auxiliary proteins and the need for additional control points in their assembly are considered. The conclusion suggests that some viral assembly principles are limited paradigms for protein associations occurring in the broader range of cell biology including signal transduction, interaction of transcription factors and protein trafficking.

High-resolution icosahedral reconstruction: fulfilling the promise of cryo-electron microscopy

Two recent papers have defined the secondary structure of the hepatitis virus capsid using a combination of cryo-electron microscopy and icosahedral image reconstruction. These two papers do more than reveal a new fold for a virus protein; they herald a new era in which image reconstruction of single particles will provide reliable high-resolution structural information. In revealing the promise of these techniques to the structural biology community, their two papers should play a seminal role for single particle work, similar to that of the work of Unwin and Henderson on bacteriorhodopsin in revealing the potential of electron microscopy of membrane protein crystals. Indeed, the success of these single particle methods owes much to the development of high-resolution techniques for two-dimensional crystals. This review will summarize some of the history of icosahedral reconstruction from cryo-electron micrographs, compare the two different approaches used to obtain the recent results and outline some of the challenges and promises for the future.