Critical review on biofilm methods

Live Cell Analysis of Shear Stress on Pseudomonas aeruginosa Using an Automated Higher-Throughput Microfluidic System

A higher-throughput microfluidic in vitro bioreactor coupled with fluorescence microscopy has been used to study bacterial biofilm growth and morphology, including Pseudomonas aeruginosa (P. aeruginosa). Here, we will describe how the system can be used to study the growth kinetics and the morphological properties such as the surface roughness and textural entropy of P. aeruginosa strain PA01 that expresses an enhanced green fluorescent protein (PA01-EGFP). A detailed protocol will describe how to grow and seed PA01-EGFP cultures, how to set up the microscope and autorun, and conduct the image analysis to determine growth rate and morphological properties using a variety of shear forces that are controlled by the microfluidic device. This article will provide a detailed description of a technique to improve the study of PA01-EGFP biofilms which eventually can be applied towards other strains of bacteria, fungi, or algae biofilms using the microfluidic platform.

Microfluidic bioanalytical flow cells for biofilm studies: a review

Bacterial biofilms are among the oldest and most prevalent multicellular life forms on Earth and are increasingly relevant in research areas related to industrial fouling, medicine and biotechnology. The main hurdles to obtaining definitive experimental results include time-varying biofilm properties, structural and chemical heterogeneity, and especially their strong sensitivity to environmental cues. Therefore, in addition to judicious choice of measurement tools, a well-designed biofilm study requires strict control over experimental conditions, more so than most chemical studies. Due to excellent control over a host of physiochemical parameters, microfluidic flow cells have become indispensable in microbiological studies. Not surprisingly, the number of lab-on-chip studies focusing on biofilms and other microbiological systems with expanded analytical capabilities has expanded rapidly in the past decade. In this paper, we comprehensively review the current state of microfluidic bioanalytical research applied to bacterial biofilms and offer a perspective on new approaches that are expected to drive continued advances in this field.

Reducing Quorum Sensing-Mediated Virulence Factor Expression and Biofilm Formation in Hafnia alvei by Using the Potential Quorum Sensing Inhibitor L-Carvone

Quorum sensing (QS), one of the most remarkable microbiological discoveries, is considered a global gene regulatory mechanism for various traits in bacteria, including virulence and spoilage. Hafnia alvei, an opportunistic pathogen and a dominant psychrophile, uses the lux-type QS system to regulate the production of virulence factors and biofilms, which are harmful to the food industry. Based on the QS interference approach, this study aimed to reveal the efficacy of L-carvone at sublethal concentrations on QS-regulated virulence factors and biofilm formation in H. alvei. QS inhibitory activity was demonstrated by the reduction in swinging motility (61.49%), swarming motility (74.94%), biofilm formation (52.41%) and acyl-homoserine lactone (AHL) production (0.5 μL/mL). Additionally, in silico analysis and RT-qPCR studies for AHL synthase HalI and QS transcriptional regulator HalR revealed a plausible molecular mechanism for QS inhibition by L-carvone. These findings suggest that L-carvone (a main component of spearmint essential oils) could be used as a novel quorum sensing inhibitor to control H. alvei in the food industry.

Advanced characterization of natural biofilm on nanofiber scaffold

Nanofiber scaffolds provide numerous advantages over common carriers engineered for microorganisms. The most important advantage is an increased speed of primary surface colonization (up to four times faster), which shortens the time required for the areal biofilm formation and optimum performance of attached microorganisms (higher efficiency of biological activity of up to twice as fast). Image analysis predicts early formation of biofilm even in beginning stages; analysis of biofilm reveals the different structures of bacterial colonies on both scaffolds (higher porosity, size, and number of bacterial colonies on nanofiber’s surface). The image analysis correlates well with determinations of dry matter (linear correlation of 0.96) and proteins (linear correlation of 0.89).

Determination of Tobramycin and Vancomycin Exposure Required to Eradicate Biofilms on Muscle and Bone Tissue In Vitro

Background: Bacterial biofilms cause chronic orthopaedic infections. Surgical debridement to remove biofilm can be ineffective without adjuvant local antimicrobials because undetected biofilm fragments may remain in the wound and reestablish the infection if untreated. However, the concentrations and duration of antimicrobial exposure necessary to eradicate bacteria from clinical biofilms remain largely undefined. In this study, we determined the minimum biofilm eradication concentration (MBEC) of tobramycin and vancomycin for bacterial biofilms grown on bone and muscle in vitro. Methods: Biofilms of pathogens found in musculoskeletal infections (S. aureus, S. epidermidis, E. faecalis, P. aeruginosa, and E. coli) were established for 72 hr on rabbit muscle and bone specimens in vitro and characterized by SEM imaging and CFU counts. Biofilm-covered tissue specimens were exposed to serial log2 dilutions (4000-31.25 µg/mL) of tobramycin, vancomycin, or a 1:1 combination of both drugs for 6, 24, or 72 hr. Tissues were subcultured following antimicrobial exposure to determine bacterial survival. The breakpoint concentration with no surviving bacteria was defined as the MBEC for each pathogen-antimicrobial-exposure time combination. Results: All tested pathogens formed biofilm on tissue. Tobramycin/vancomycin (1:1) was the most effective antimicrobial regimen with MBEC on muscle (10/10 pathogens) or bone (7/10 pathogens) generally in the range of 100-750 µg/mL with 24 or 72 hr exposure. MBEC decreased with exposure time for 53.3% of biofilms between 6 and 24 hr, 53.3% of biofilms between 24 and 72 hr, and for 76.7% of biofilms between 6 and 72 hr. MBECs on bone were significantly higher than corresponding MBECs on muscle tissue (p < 0.05). In most cases, tissue MBECs were lower compared to previously published MBECs for the same pathogens on polystyrene tissue-culture plates. Conclusions: The majority of MBECs for orthopaedic infections on bone and muscle are on the order of 100-750 µg/mL of vancomycin+tobramycin when sustained for at least 24 hr, which may be clinically achievable using high-dose antimicrobial-loaded bone cement (ALBC).

Biofilm Assays on Fibrinogen-coated Silicone Catheters and 96-well Polystyrene Plates

Biofilm formation is a well-known bacterial strategy that protects cells from hostile environments. During infection, bacteria found in a biofilm community are less sensitive to antibiotics and to the immune response, often allowing them to colonize and persist in the host niche. Not surprisingly, biofilm formation on medical devices, such as urinary catheters, is a major problem in hospital settings. To be able to eliminate such biofilms, it is important to understand the key bacterial factors that contribute to their formation. A common practice in the lab setting is to study biofilms grown in laboratory media. However, these media do not fully reflect the host environment conditions, potentially masking relevant biological determinants. This is the case during urinary catheterization, where a key element for Enterococcus faecalis and Staphylococcus aureus colonization and biofilm formation is the release of fibrinogen (Fg) into the bladder and its deposition on the urinary catheter. To recapitulate bladder conditions during catheter-associated urinary tract infection (CAUTI), we have developed a fibrinogen-coated catheter and 96-well plate biofilm assay in urine. Notably, enterococcal biofilm factors identified in these in vitro assays proved to be important for biofilm formation in vivo in a mouse model of CAUTI. Thus, the method described herein can be used to uncover biofilm-promoting factors that are uniquely relevant in the host environment, and that can be exploited to develop new antibacterial therapies.

Biofilm model systems for root canal disinfection: a literature review

The aim of this review was to present an overview of laboratory root canal biofilm model systems described in the endodontic literature and to critically appraise the various factors that constitute these models. The electronic databases MEDLINE, Web of Science and EMBASE were searched up to and including December 2016 to identify laboratory studies using endodontic biofilm models. The following search terms were used in various combinations: biofilm, root canal, in vitro, endodontic, bacteria, root canal infection model, colony-forming unit. Only English papers from journals with an impact factor were selected. The records were screened by two reviewers, and full-text articles were assessed according to pre-defined criteria. The following data were extracted from the included studies: the microbial composition of the biofilm, the substrate, growth conditions, validation and quantification. Seventy-seven articles met the inclusion criteria. In the majority (86%) of the studies, a monospecies biofilm was cultured. In two studies, a dual-species biofilm was grown; others cultivated a multispecies biofilm, containing at least three species. Enterococcus faecalis was the most frequently used test species (in 79% of all studies, 92% of the monospecies studies). Four studies used an inoculum derived directly from the oral cavity. Human dentine was the most frequently used substratum (88% of the studies). Incubation times differed considerably, ranging from one to seventy days. The most common quantification method (in 87% of the studies) was bacterial culturing, followed by microscopy techniques. The variation in laboratory root canal biofilm model systems is notable. Because of substantial variation in experimental parameters, it is difficult to compare results between studies. This demonstrates the need for a more standardized approach and a validated endodontic biofilm model.

α-Chymotrypsin Immobilized on a Low-Density Polyethylene Surface Successfully Weakens Escherichia coli Biofilm Formation

The protease α-chymotrypsin (α-CT) was covalently immobilized on a low-density polyethylene (LDPE) surface, providing a new non-leaching material (LDPE-α-CT) able to preserve surfaces from biofilm growth over a long working timescale. The immobilized enzyme showed a transesterification activity of 1.24 nmol/h, confirming that the immobilization protocol did not negatively affect α-CT activity. Plate count viability assays, as well as confocal laser scanner microscopy (CLSM) analysis, showed that LDPE-α-CT significantly impacts Escherichia coli biofilm formation by (i) reducing the number of adhered cells (-70.7 ± 5.0%); (ii) significantly affecting biofilm thickness (-81.8 ± 16.7%), roughness (-13.8 ± 2.8%), substratum coverage (-63.1 ± 1.8%), and surface to bio-volume ratio (+7.1 ± 0.2-fold); and (iii) decreasing the matrix polysaccharide bio-volume (80.2 ± 23.2%). Additionally, CLSM images showed a destabilized biofilm with many cells dispersing from it. Notably, biofilm stained for live and dead cells confirmed that the reduction in the biomass was achieved by a mechanism that did not affect bacterial viability, reducing the chances for the evolution of resistant strains.

Planning a One Health Case Study to Evaluate Methicillin Resistant Staphylococcus aureus and Its Economic Burden in Portugal

Methicillin-resistant Staphylococcus aureus (MRSA) is one of the most important multidrug-resistant nosocomial pathogens worldwide with infections leading to high rates of morbidity and mortality, a significant burden to human and veterinary clinical practices. The ability of S. aureus colonies to form biofilms on biotic and abiotic surfaces contributes further to its high antimicrobial resistance (AMR) rates and persistence in both host and non-host environments, adding a major ecological dimension to the problem. While there is a lot of information on MRSA prevalence in humans, data about MRSA in animal populations is scarce, incomplete and dispersed. This project is an attempt to evaluate the current epidemiological status of MRSA in Portugal by making a single case study from a One Health perspective. We aim to determine the prevalence of MRSA in anthropogenic sources liable to contaminate different animal habitats. The results obtained will be compiled with existing data on antibiotic resistant staphylococci from Portugal in a user-friendly database, to generate a geographically detailed epidemiological output for surveillance of AMR in MRSA. To achieve this, we will first characterize AMR and genetic lineages of MRSA circulating in northern Portugal in hospital wastewaters, farms near hospitals, farm animals that contact with humans, and wild animals. This will indicate the extent of the AMR problem in the context of local and regional human-animal-environment interactions. MRSA strains will then be tested for their ability to form biofilms. The proteomes of the strains will be compared to better elucidate their AMR mechanisms. Proteomics data will be integrated with the genomic and transcriptomic data obtained. The vast amount of information expected from this omics approach will improve our understanding of AMR in MRSA biofilms, and help us identify new vaccine candidates and biomarkers for early diagnosis and innovative therapeutic strategies to tackle MRSA biofilm-associated infections and potentially other AMR superbugs.

Monitoring Candida parapsilosis and Staphylococcus epidermidis Biofilms by a Combination of Scanning Electron Microscopy and Raman Spectroscopy

The biofilm-forming microbial species Candida parapsilosis and Staphylococcus epidermidis have been recently linked to serious infections associated with implanted medical devices. We studied microbial biofilms by high resolution scanning electron microscopy (SEM), which allowed us to visualize the biofilm structure, including the distribution of cells inside the extracellular matrix and the areas of surface adhesion. We compared classical SEM (chemically fixed samples) with cryogenic SEM, which employs physical sample preparation based on plunging the sample into various liquid cryogens, as well as high-pressure freezing (HPF). For imaging the biofilm interior, we applied the freeze-fracture technique. In this study, we show that the different means of sample preparation have a fundamental influence on the observed biofilm structure. We complemented the SEM observations with Raman spectroscopic analysis, which allowed us to assess the time-dependent chemical composition changes of the biofilm in vivo. We identified the individual spectral peaks of the biomolecules present in the biofilm and we employed principal component analysis (PCA) to follow the temporal development of the chemical composition.

Comparison of three methods for cell surface proteome extraction of Listeria monocytogenes biofilms

The cell surface proteome of the foodborne pathogen Listeria monocytogenes, the etiological agent of listeriosis, is critical for understanding the physiological processes associated with stress resistance and persistence in the environment. In this context, the most widespread mode of growth for bacterial cells in natural and industrial environments is in biofilms. Cell surface proteins are, however, challenging to characterize because of their low abundance and poor solubility. Moreover, cell surface protein extracts are usually contaminated with cytoplasmic proteins that constitute the main signal in proteomic analysis. This study aimed to compare the efficiency of three methods to extract and explore surface proteins of L. monocytogenes growing in a biofilm: trypsin shaving, biotinylation, and cell fractionation. Peptide separation and identification were performed by shotgun proteomics using high-performance liquid chromatography combined with tandem mass spectrometry (LC-MS/MS). The biotinylation method was the most effective in extracting surface proteins, with the lowest rate of contamination by cytoplasmic proteins. Although presenting a higher contamination rate in cytoplasmic proteins, the other two techniques allowed the identification of additional surface proteins. Seven proteins were commonly retrieved by the three methods. The extracted proteins belong to several functional classes, involved in virulence, transport, or metabolic pathways. Finally, the three extraction methods seemed complementary and their combined use improved the exploration of the bacterial surface proteome. These new findings collectively inform future discovery and translational proteomics for clinical, environmental health, and industrial applications.

EmrR-Dependent Upregulation of the Efflux Pump EmrCAB Contributes to Antibiotic Resistance in Chromobacterium violaceum

Chromobacterium violaceum is an environmental Gram-negative bacterium that causes infections in humans. Treatment of C. violaceum infections is difficult and little is known about the mechanisms of antibiotic resistance in this bacterium. In this work, we identified mutations in the MarR family transcription factor EmrR and in the protein GyrA as key determinants of quinolone resistance in C. violaceum, and we defined EmrR as a repressor of the MFS-type efflux pump EmrCAB. Null deletion of emrR caused increased resistance to nalidixic acid, but not to other quinolones or antibiotics of different classes. Moreover, the ΔemrR mutant showed decreased production of the purple pigment violacein. Importantly, we isolated C. violaceum spontaneous nalidixic acid-resistant mutants with a point mutation in the DNA-binding domain of EmrR (R92H), with antibiotic resistance profile similar to that of the ΔemrR mutant. Other spontaneous mutants with high MIC values for nalidixic acid and increased resistance to fluoroquinolones presented point mutations in the gene gyrA. Using DNA microarray, Northern blot and EMSA assays, we demonstrated that EmrR represses directly a few dozen genes, including the emrCAB operon and other genes related to transport, oxidative stress and virulence. This EmrR repression on emrCAB was relieved by salicylate. Although mutation of the C. violaceum emrCAB operon had no effect in antibiotic susceptibility or violacein production, deletion of emrCAB in an emrR mutant background restored antibiotic susceptibility and violacein production in the ΔemrR mutant. Using a biosensor reporter strain, we demonstrated that the lack of pigment production in ΔemrR correlates with the accumulation of quorum-sensing molecules in the cell supernatant of this mutant strain. Therefore, our data revealed that overexpression of the efflux pump EmrCAB via mutation and/or derepression of EmrR confers quinolone resistance and alters quorum-sensing signaling in C. violaceum, and that point mutation in emrR can contribute to emergence of antibiotic resistance in bacteria.

In vitro and ex vivo systems at the forefront of infection modeling and drug discovery

Bacterial infections and antibiotic resistant bacteria have become a growing problem over the past decade. As a result, the Centers for Disease Control predict more deaths resulting from microorganisms than all cancers combined by 2050. Currently, many traditional models used to study bacterial infections fail to precisely replicate the in vivo bacterial environment. These models often fail to incorporate fluid flow, bio-mechanical cues, intercellular interactions, host-bacteria interactions, and even the simple inclusion of relevant physiological proteins in culture media. As a result of these inadequate models, there is often a poor correlation between in vitro and in vivo assays, limiting therapeutic potential. Thus, the urgency to establish in vitro and ex vivo systems to investigate the mechanisms underlying bacterial infections and to discover new-age therapeutics against bacterial infections is dire. In this review, we present an update of current in vitro and ex vivo models that are comprehensively changing the landscape of traditional microbiology assays. Further, we provide a comparative analysis of previous research on various established organ-disease models. Lastly, we provide insight on future techniques that may more accurately test new formulations to meet the growing demand of antibiotic resistant bacterial infections.

Exploring photoinactivation of microbial biofilms using laser scanning microscopy and confined 2-photon excitation

One pertinent complication in bacterial infection is the growth of biofilms, that is, communities of surface-adhered bacteria resilient to antibiotics. Photodynamic inactivation (PDI) has been proposed as an alternative to antibiotic treatment; however, novel techniques complementing standard efficacy measures are required. Herein, we present an approach employing multiphoton microscopy complemented with Airyscan super-resolution microscopy, to visualize the distribution of curcumin in Staphylococcus epidermidis biofilms. The effects of complexation of curcumin with hydroxypropyl-γ-cyclodextrin (HPγCD) were studied. It was shown that HPγCD curcumin demonstrated higher bioavailability in the biofilms compared to curcumin, without affecting the subcellular uptake. Spectral quantification following PDI demonstrates a method for monitoring elimination of biofilms in real time using noninvasive 3D imaging. Additionally, spatially confined 2-photon inactivation was demonstrated for the first time in biofilms. These results support the feasibility of advanced optical microscopy as a sensitive tool for evaluating treatment efficacy in biofilms toward improved mechanistic studies of PDI.

Antimicrobial Photodynamic Inactivation Mediated by Rose Bengal and Erythrosine Is Effective in the Control of Food-Related Bacteria in Planktonic and Biofilm States

The thermal and chemical-based methods applied for microbial control in the food industry are not always environmentally friendly and may change the nutritional and organoleptic characteristics of the final products. Moreover, the efficacy of sanitizing agents may be reduced when microbial cells are enclosed in biofilms. The objective of this study was to investigate the effect of photodynamic inactivation, using two xanthene dyes (rose bengal and erythrosine) as photosensitizing agents and green LED as a light source, against Staphylococcus aureus, Listeria innocua, Enterococcus hirae and Escherichia coli in both planktonic and biofilm states. Both photosensitizing agents were able to control planktonic cells of all bacteria tested. The treatments altered the physicochemical properties of cells surface and also induced potassium leakage, indicating damage of cell membranes. Although higher concentrations of the photosensitizing agents (ranging from 0.01 to 50.0 μmol/L) were needed to be applied, the culturability of biofilm cells was reduced to undetectable levels. This finding was confirmed by the live/dead staining, where propidium iodide-labeled bacteria numbers reached up to 100%. The overall results demonstrated that photoinactivation by rose bengal and erythrosine may be a powerful candidate for the control of planktonic cells and biofilms in the food sector.

In situ substrate-formed biofilms using IDODS mimic supragingival tooth-formed biofilms

This study aimed to compare the bacterial viability and diversity of a substrate-formed biofilm (SF-biofilm) in situ to a supragingival tooth-formed biofilm (TF-biofilm) in the same group of individuals. The impact of the device/disc position and toothbrushing during the formation of SF-biofilm was also assessed. Two tests were run. In test 1, 15 volunteers wore two hemi-splints carrying six discs of human enamel, glass, and hydroxyapatite for 2 days, and were instructed to not perform any oral hygiene measure. Biofilm samples were collected from the substrates and the contralateral tooth and were analysed using CLSM. In five volunteers, half of the biofilm present on the discs and their contralateral teeth were scraped and analysed using 16S  pyrosequencing. In test 2, the microscopic analysis was repeated only on the SF-biofilm samples, and the volunteers were allowed to brush their teeth. Multivariate analyses revealed that the donors had a significant effect on the composition of the biofilm, confirming its subject-dependent character. The bacterial composition of the SF-biofilm was similar to the TF-biofilm, with significant differential abundance detected in very few taxa of low abundance. The toothbrushing during the formation of SF-biofilm was the only factor that conditioned the thickness or bacterial viability.

Microplastics: New substrates for heterotrophic activity contribute to altering organic matter cycles in aquatic ecosystems

Heterotrophic microbes with the capability to process considerable amounts of organic matter can colonize microplastic particles (MP) in aquatic ecosystems. Weather colonization of microorganisms on MP will alter ecological niche and functioning of microbial communities remains still unanswered. Therefore, we compared the functional diversity of biofilms on microplastics when incubated in three lakes in northeastern Germany differing in trophy and limnological features. For all lakes, we compared heterotrophic activities of MP biofilms with those of microorganisms in the surrounding water by using Biolog® EcoPlates and assessed their oxygen consumption in microcosm assays with and without MP. The present study found that the total biofilm biomass was higher in the oligo-mesotrophic and dystrophic lakes than in the eutrophic lake. In all lakes, functional diversity profiles of MP biofilms consistently differed from those in the surrounding water. However, solely in the oligo-mesotrophic lake MP biofilms had a higher functional richness compared to the ambient water. These results demonstrate that the functionality and hence the ecological role of MP-associated microbial communities are context-dependent, i.e. different environments lead to substantial changes in biomass build up and heterotrophic activities of MP biofilms. We propose that MP surfaces act as new niches for aquatic microorganisms and that the constantly increasing MP pollution has the potential to globally impact carbon dynamics of pelagic environments by altering heterotrophic activities.

Investigation of the population dynamics within a Pseudomonas aeruginosa biofilm using a flow based biofilm model system and flow cytometric evaluation of cellular physiology

In this study a flow based biofilm model system was used to simulate the formation of Pseudomonas aeruginosa biofilms on a stainless steel surface. To investigate the complexity of biofilm-associated P. aeruginosa populations a combination of microscopic observations and flow cytometric analysis (FCM) was adopted. Biofilm-associated P. aeruginosa cells were evaluated (1) under optimal vs reduced nutrient-availability at the initial adhesion stage, and (2) irrespective of nutrient-availability within a mature biofilm. Microscopic estimation of the extent of attachment revealed more effective colonization upon optimal vs starvation conditions. FCM allowed an in situ evaluation of P. aeruginosa vitality, using cellular redox potential measurements to discriminate active, mid-active and non-active sub-populations. Samples from recently attached cells and mature biofilms showed significant differences in the percentages of bacterial cells from the defined sub-populations. The approach demonstrated that distribution of individual P. aeruginosa sub-populations was influenced by the stage of the biofilm life-cycle and nutrient availability.

A steam-based method to investigate biofilm

Biofilm has become a major topic of interest in medical, food, industrial, and environmental bacteriology. To be relevant, investigation of biofilm behavior requires effective and reliable techniques. We present herein a simple and robust method, adapted from the microplate technique, in which steam is used as a soft washing method to preserve biofilm integrity and to improve reproducibility of biofilm quantification. The kinetics of steam washing indicated that the method is adapted to remove both planktonic bacteria and excess crystal violet (CV) staining for S. aureus, S. epidermidis, S. carnosus, P. aeruginosa, and E. coli biofilm. Confocal laser scanning microscopy confirmed that steam washing preserved the integrity of the biofilm better than pipette-based washing. We also investigated the measurement of the turbidity of biofilm resuspended in phosphate-buffered saline (PBS) as an alternative to staining with CV. This approach allows the discrimination of biofilm producer strains from non-biofilm producer strains in a way similar to CV staining, and subsequently permits quantification of viable bacteria present in biofilm by culture enumeration from the same well. Biofilm quantification using steam washing and PBS turbidity reduced the technical time needed, and data were highly reproducible.

Anti-Quorum Sensing Activity of 12 Essential Oils on chromobacterium violaceum and Specific Action of cis-cis-p-Menthenolide from Corsican Mentha suaveolens ssp. Insularis

Quorum sensing (QS) is a bacterial communication mechanism used to express various survival or virulence traits leading to enhanced resistance. Chromobacterium violaceum is a commonly used strain that highlights anti-QS action of bioactive substances. Here, we wanted to see if 12 selected essential oils (EO) could exert anti-QS activity. We measured the sublethal minimal QS inhibitory concentration (MQSIC) by assessing violacein production of C. violaceum along with bacterial growth. To confirm the QS disruption, we also proceed to surface bacterial observations using scanning electron microscopy (SEM). We showed that cis-cis-p-menthenolide extracted and isolated from a plant endemic to occidental Mediterranean Sea islands, Mentha suaveolens ssp. insularis, acts as an inhibitor of violacein production and biofilm formation. Measured MQSIC was much lower than the minimal inhibitory concentration (MIC): 0.10 mg·mL-1 vs. 3.00 mg·mL-1. Moreover, disturbance of QS-related traits was confirmed by the degradation of C. violaceum biofilm matrix. There is a clear structure⁻activity relationship between cis-cis-p-menthenolide and anti-QS activity. Indeed, its isomer molecule (mintlactone) exerts a poor anti-QS action. These results indicate that inhibition of violacein production and biofilm formation by cis-cis-p-menthenolide might be related to a disruption in the QS mechanism.

Towards standardized mechanical characterization of microbial biofilms: analysis and critical review

Developing reliable anti-biofilm strategies or efficient biofilm-based bioprocesses strongly depends on having a clear understanding of the mechanisms underlying biofilm development, and knowledge of the relevant mechanical parameters describing microbial biofilm behavior. Many varied mechanical testing methods are available to assess these parameters. The mechanical properties thus identified can then be used to compare protocols such as antibiotic screening. However, the lack of standardization in both mechanical testing and the associated identification methods for a given microbiological goal remains a blind spot in the biofilm community. The pursuit of standardization is problematic, as biofilms are living structures, i.e., both complex and dynamic. Here, we review the main available methods for characterizing the mechanical properties of biofilms through the lens of the relationship linking experimental testing to the identification of mechanical parameters. We propose guidelines for characterizing biofilms according to microbiological objectives that will help the reader choose an appropriate test and a relevant identification method for measuring any given mechanical parameter. The use of a common methodology for the mechanical characterization of biofilms will enable reliable analysis and comparison of microbiological protocols needed for improvement of engineering process and screening.

Synergistic Removal of Static and Dynamic Staphylococcus aureus Biofilms by Combined Treatment with a Bacteriophage Endolysin and a Polysaccharide Depolymerase

Staphylococcus aureus is an important pathogen and biofilm former. Biofilms cause problems in clinics and food production and are highly recalcitrant to antibiotics and sanitizers. Bacteriophage endolysins kill bacteria by degrading their cell wall and are therefore deemed promising antimicrobials and anti-biofilm agents. Depolymerases targeting polysaccharides in the extracellular matrix have been suggested as parts of a multi-enzyme approach to eradicate biofilms. The efficacy of endolysins and depolymerases against S. aureus biofilms in static models has been demonstrated. However, there is a lack of studies evaluating their activity against biofilms grown under more realistic conditions. Here, we investigated the efficacy of the endolysin LysK and the poly-N-acetylglucosamine depolymerase DA7 against staphylococcal biofilms in static and dynamic (flow cell-based) models. LysK showed activity against multiple S. aureus strains, and both LysK and DA7 removed static and dynamic biofilms from polystyrene and glass surfaces at low micromolar and nanomolar concentrations, respectively. When combined, the enzymes acted synergistically, as demonstrated by crystal violet staining of static biofilms, significantly reducing viable cell counts compared to individual enzyme treatment in the dynamic model, and confocal laser scanning microscopy. Overall, our results suggest that LysK and DA7 are potent anti-biofilm agents, alone and in combination.

High Correlation Between Structure Development and Chemical Variation During Biofilm Formation by Vibrio parahaemolyticus

The complex three-dimensional structure of biofilms is supported by extracellular polymeric substances (EPSs) and additional insight on chemical variations in EPS and biofilm structure development will inform strategies for control of biofilms. Vibrio parahaemolyticus VPS36 biofilm development was studied using confocal laser scanning microscopy (CLSM) and Raman spectroscopy (RM). The structural parameters of the biofilm (biovolume, mean thickness, and porosity) were characterized by CLSM and the results showed that VPS36 biofilm formed dense structures after 48 h incubation. There were concurrent variations in carbohydrates and nucleic acids contents in the EPS as evidenced by RM. The Raman intensities of the chemical component in EPS, measured using Pearson's correlation coefficient, were positively correlated with biovolume and mean thickness, and negatively correlated with porosity. The Raman intensity for carbohydrates correlated closely with mean thickness (p-value < 0.01) and the Raman intensity for nucleic acid correlated closely with porosity (p-value < 0.01). Additional evidence for these correlations were confirmed using scanning electron microscopic (SEM) and crystal violet staining.

Inactivation of Pseudomonas aeruginosa biofilms formed under high shear stress on various hydrophilic and hydrophobic surfaces by a continuous flow of ozonated water

The inactivation of Pseudomonas aeruginosa biofilms grown on glass under high shear stress and exposed to a range of dissolved ozone concentrations (2, 5 and 7 ppm) at 10 and 20 min was investigated. The regression equation, log reduction (biofilm) = 0.64 + 0.59×(C - 2) + 0.33×(T - 10), described the dependence of biofilm inactivation on the dissolved ozone concentration (C, ppm) and contact time (T, min). The predicted D-values were 11.1, 5.7 and 2.2 min at 2, 5 and 7 ppm, respectively. Inactivation of biofilms grown on various surfaces was tested at a single dissolved ozone concentration of 5 ppm and a single exposure time of 20 min. Biofilms grown on plastic materials showed inactivation results similar to that of biofilms on glass, while biofilms grown on ceramics were statistically significantly more difficult to inactivate, suggesting the importance of utilizing non-porous materials in industrial and clinical settings.

Dopamine-functionalized sulphated hyaluronic acid as a titanium implant coating enhances biofilm prevention and promotes osseointegration

A series of new hyaluronan derivatives was synthesized and tested as an antibiotic release system by antibacterial and osseointegration assays. Specifically, partially sulphated hyaluronic acid (sHA) was functionalized with dopamine (DA). The DA moiety guarantees good performance as a binding agent for coating a titanium alloy surface; furthermore, the negatively charged sHA has bone regenerative effects and a high binding affinity for positively charged antibiotics. A sHA scaffold with a defined degree of sulphation (DS =2) was selected as a good compromise between a high negative charge density and poor heparin-like anticoagulant activity, while the degree of DA derivatization (17.1%mol) was chosen based on the absence of cytotoxic activity and the promotion of osteoblast proliferation. The titanium alloy coating was investigated indirectly using a fluorescent probe and directly by environmental scanning electron microscope (ESEM) analysis. Long-duration antibiotic release was demonstrated in vitro, and antibacterial efficacy against a Staphylococcus aureus culture was shown.

Extracellular DNA in natural environments: features, relevance and applications

Extracellular DNA (exDNA) is abundant in many habitats, including soil, sediments, oceans and freshwater as well as the intercellular milieu of metazoa. For a long time, its origin has been assumed to be mainly lysed cells. Nowadays, research is collecting evidence that exDNA is often secreted actively and is used to perform a number of tasks, thereby offering an attractive target or tool for biotechnological, medical, environmental and general microbiological applications. The present review gives an overview on the main research areas dealing with exDNA, depicts its inherent origins and functions and deduces the potential of existing and emerging exDNA-based applications. Furthermore, it provides an overview on existing extraction methods and indicates common pitfalls that should be avoided whilst working with exDNA.

MALDI mass spectrometry imaging and in situ microproteomics of Listeria monocytogenes biofilms

MALDI-TOF Mass spectrometry Imaging (MSI) is a surface-sampling technology that can determine spatial information and relative abundance of analytes directly from biological samples. Human listeriosis cases are due to the ingestion of contaminated foods with the pathogenic bacteria Listeria monocytogenes. The reduction of water availability in food workshops by decreasing the air relative humidity (RH) is one strategy to improve the control of bacterial contamination. This study aims to develop and implement an MSI approach on L. monocytogenes biofilms and proof of concept using a dehumidified stress condition. MSI allowed examining the distribution of low molecular weight proteins within the biofilms subjected to a dehumidification environment, mimicking the one present in a food workshop (10 °C, 75% RH). Furthermore, a LC-MS/MS approach was made to link the dots between MSI and protein identification. Five identified proteins were assigned to registered MSI m/z, including two cold-shock proteins and a ligase involved in cell wall biogenesis. These data demonstrate how imaging can be used to dissect the proteome of an intact bacterial biofilm giving new insights into protein expression relating to a dehumidification stress adaptation. Data are available via ProteomeXchange with identifier PXD010444.

BIOLOGICAL SIGNIFICANCE

The ready-to-eat food processing industry has the daily challenge of controlling the contamination of surfaces and machines with spoilage and pathogenic microorganisms. In some cases, it is a lost cause due to these microorganisms' capacity to withstand the cleaning treatments, like desiccation procedures. Such a case is the ubiquitous Gram-positive Bacterium Listeria monocytogenes. Its surface proteins have particular importance for the interaction with its environment, being important factors contributing to adaptation to stress conditions. There are few reproducibly techniques to obtain the surface proteins of Gram-positive cells. Here, we developed a workflow that enables the use of MALDI imaging on Gram-positive bacterium biofilms to study the impact of dehumidification on sessile cells. It will be of the most interest to test this workflow with different environmental conditions and potentially apply it to other biofilm-forming bacteria.

Validation of biofilm formation on human skin wound models and demonstration of clinically translatable bacteria-specific volatile signatures

Biofilms are major contributors to delayed wound healing and there is a need for clinically relevant experimental models to assess theranostics. Microorganisms release volatile organic compounds (VOCs) and the ability to identify these in infected cutaneous wounds could lead to efficient non-invasive diagnosis. The aims here were to develop and assess bacterial biofilm formation and identify their VOC profiles in an in vitro model and validate in human ex vivo incisional and excisional cutaneous wound models. Biofilm development was assessed using multiple microscopy techniques with biofilm-forming deficient controls and quantified using metabolic and biomass assays; and VOC production measured by gas chromatography-mass spectrometry. The production of most VOCs was affected by biofilm development and model used. Some VOCs were specific either for planktonic or biofilm growth. The relative abundance of some VOCs was significantly increased or decreased by biofilm growth phase (P < 0.05). Some Staphylococcus aureus and Pseudomonas aeruginosa VOCs correlated with biofilm metabolic activity and biomass (R ≤ −0.5; ≥0.5). We present for the first time bacterial biofilm formation in human ex vivo cutaneous wound models and their specific VOC profiles. These models provide a vehicle for human skin-relevant biofilm studies and VOC detection has potential clinical translatability in efficient non-invasive diagnosis of wound infection.

Efficacy of sodium dodecyl sulphate and natural extracts against E. coli biofilm

The aim of this study was to determine and compare the efficacy of a standard cleaning agent, sodium dodecyl sulphate, and natural extracts from pomegranate peel grape skin and bay laurel leaf against E. coli biofilm. The biofilm was exposed for 10 minutes to three different concentrations of each tested compound. The results show that bay laurel leaf extract is the most efficient with 43% biofilm biomass reduction, followed by pomegranate peel extract (35%); sodium dodecyl sulphate and grape skin extract each have 30% efficacy. Our study demonstrated that natural extracts from selected plants have the same or even better efficacy against E. coli biofilm removal from surfaces than the tested classical cleaning agent do. All this indicates that natural plant extracts, which are acceptable from the health and environment points of view, can be potential substitutes for classical cleaning agents.

Critical Assessment of Methods to Quantify Biofilm Growth and Evaluate Antibiofilm Activity of Host Defence Peptides

Biofilms are multicellular communities of bacteria that can adhere to virtually any surface. Bacterial biofilms are clinically relevant, as they are responsible for up to two-thirds of hospital acquired infections and contribute to chronic infections. Troublingly, the bacteria within a biofilm are adaptively resistant to antibiotic treatment and it can take up to 1000 times more antibiotic to kill cells within a biofilm when compared to planktonic bacterial cells. Identifying and optimizing compounds that specifically target bacteria growing in biofilms is required to address this growing concern and the reported antibiofilm activity of natural and synthetic host defence peptides has garnered significant interest. However, a standardized assay to assess the activity of antibiofilm agents has not been established. In the present work, we describe two simple assays that can assess the inhibitory and eradication capacities of peptides towards biofilms that are formed by both Gram-positive and negative bacteria. These assays are suitable for high-throughput workflows in 96-well microplates and they use crystal violet staining to quantify adhered biofilm biomass as well as tetrazolium chloride dye to evaluate the metabolic activity of the biofilms. The effect of media composition on the readouts of these biofilm detection methods was assessed against two strains of Pseudomonas aeruginosa (PAO1 and PA14), as well as a methicillin resistant strain of Staphylococcus aureus. Our results demonstrate that media composition dramatically alters the staining patterns that were obtained with these dye-based methods, highlighting the importance of establishing appropriate biofilm growth conditions for each bacterial species to be evaluated. Confocal microscopy imaging of P. aeruginosa biofilms grown in flow cells revealed that this is likely due to altered biofilm architecture under specific growth conditions. The antibiofilm activity of several antibiotics and synthetic peptides were then evaluated under both inhibition and eradication conditions to illustrate the type of data that can be obtained using this experimental setup.

Antibiofilm Peptides and Peptidomimetics with Focus on Surface Immobilization

Bacterial biofilms pose a major threat to public health, as they are associated with at least two thirds of all infections. They are highly resilient and render conventional antibiotics inefficient. As a part of the innate immune system, antimicrobial peptides have drawn attention within the last decades, as some of them are able to eradicate biofilms at sub-minimum inhibitory concentration (MIC) levels. However, peptides possess a number of disadvantages, such as susceptibility to proteolytic degradation, pH and/or salinity-dependent activity and loss of activity due to binding to serum proteins. Hence, proteolytically stable peptidomimetics were designed to overcome these drawbacks. This paper summarizes the current peptide and peptidomimetic strategies for combating bacteria-associated biofilm infections, both in respect to soluble and surface-functionalized solutions.

Dynamic Sessile-Droplet Habitats for Controllable Cultivation of Bacterial Biofilm

Bacterial biofilms play essential roles in biogeochemical cycling, degradation of environmental pollutants, infection diseases, and maintenance of host health. The lack of quantitative methods for growing and characterizing biofilms remains a major challenge in understanding biofilm development. In this study, a dynamic sessile-droplet habitat is introduced, a simple method which cultivates biofilms on micropatterns with diameters of tens to hundreds of micrometers in a microfluidic channel. Nanoliter plugs are utilized, spaced by immiscible carrier oil to initiate and support the growth of an array of biofilms, anchored on and spatially confined to the micropatterns arranged on the bottom surface of the microchannel, while planktonic or dispersal cells are flushed away by shear force of aqueous plugs. The performance of the aforementioned method of cultivating biofilms is demonstrated by Pseudomonas aeruginosa PAO1 and its derived mutants, and quantitative antimicrobial susceptibility testing of PAO1 biofilms. This method could significantly eliminate corner effects, avoid microchannel clogging, and constrain the growth of biofilms for long-term observations. The controllable sessile droplet-based biofilm cultivation presented in this study should shed light on more quantitative and long-term studies of biofilms, and open new avenues for investigation of biofilm attachment, growth, expansion, and eradication.

The innovation of cryo-SEM freeze-fracturing methodology demonstrated on high pressure frozen biofilm

In this study we present an innovative method for the preparation of fully hydrated samples of microbial biofilms of cultures Staphylococcus epidermidis, Candida parapsilosis and Candida albicans. Cryo-scanning electron microscopy (cryo-SEM) and high-pressure freezing (HPF) rank among cutting edge techniques in the electron microscopy of hydrated samples such as biofilms. However, the combination of these techniques is not always easily applicable. Therefore, we present a method of combining high-pressure freezing using EM PACT2 (Leica Microsystems), which fixes hydrated samples on small sapphire discs, with a high resolution SEM equipped with the widely used cryo-preparation system ALTO 2500 (Gatan). Using a holder developed in house, a freeze-fracturing technique was applied to image and investigate microbial cultures cultivated on the sapphire discs. In our experiments, we focused on the ultrastructure of the extracellular matrix produced during cultivation and the relationships among microbial cells in the biofilm. The main goal of our investigations was the detailed visualization of areas of the biofilm where the microbial cells adhere to the substrate/surface. We show the feasibility of this technique, which is clearly demonstrated in experiments with various freeze-etching times.

Fighting biofilms with lantibiotics and other groups of bacteriocins

Biofilms are sessile communities of bacteria typically embedded in an extracellular polymeric matrix. Bacterial cells embedded in biofilms are inherently recalcitrant to antimicrobials, compared to cells existing in a planktonic state, and are notoriously difficult to eradicate once formed. Avenues to tackle biofilms thus far have largely focussed on attempting to disrupt the initial stages of biofilm formation, including adhesion and maturation of the biofilm. Such an approach is advantageous as the concentrations required to inhibit formation of biofilms are generally much lower than removing a fully established biofilm. The crisis of antibiotic resistance in clinical settings worldwide has been further exacerbated by the ability of certain pathogenic bacteria to form biofilms. Perhaps the most notorious biofilm formers described from a clinical viewpoint have been methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus epidermidis, Pseudomonas aeruginosa, Gardnerella vaginalis and Streptococcus mutans, the latter of which is found in oral biofilms. Due to the dearth of novel antibiotics in recent decades, compounded by the increasing rate of emergence of resistance amongst pathogens with a propensity for biofilm formation, solutions are urgently required to mitigate these crises. Bacteriocins are a class of antimicrobial peptides, which are ribosomally synthesised and often are more potent than their antibiotic counterparts. Here, we review a selection of studies conducted with bacteriocins with the ultimate objective of inhibiting biofilms. Overall, a deeper understanding of the precise means by which a biofilm forms on a substrate as well as insights into the mechanisms by which bacteriocins inhibit biofilms is warranted.

Mechanism of bacterial adhesion on ultrafiltration membrane modified by natural antimicrobial polymers (chitosan) and combination with activated carbon (PAC)

Bacterial adhesion to surfaces is related to several factors, such as surface charge, surface energy, and substrate characteristics (leading to the formation of biofilms). Organisms are dominant in most environmental, industrial, and medical problems and processes that are of interest to microbiologists. Biofilm cells are at least 500 times more resistant to antibacterial agents compared to planktonic cells. The usage of ultrafiltration membranes is fast becoming popular for water treatment. Membrane lifetime and permeate flux are primarily affected by the phenomena of microbial accumulation and fouling at the membrane’s surface. This review intends to understand the mechanism of membrane fouling by bacterial attachment on polymeric ultrafiltration membrane modified by natural antimicrobial polymers (chitosan) combined with powder activated carbon. Also, to guide future research on membrane water treatment processes, adhesion prediction using the extended Derjaguin-Landau-Verwey-Overbeek theory is discussed.

In vitro methods for the evaluation of antimicrobial surface designs

Bacterial adhesion and subsequent biofilm formation on biomedical implants and devices are a major cause of their failure. As systemic antibiotic treatment is often ineffective, there is an urgent need for antimicrobial biomaterials and coatings. The term "antimicrobial" can encompass different mechanisms of action (here termed "antimicrobial surface designs"), such as antimicrobial-releasing, contact-killing or non-adhesivity. Biomaterials equipped with antimicrobial surface designs based on different mechanisms of action require different in vitro evaluation methods. Available industrial standard evaluation tests do not address the specific mechanisms of different antimicrobial surface designs and have therefore been modified over the past years, adding to the myriad of methods available in the literature to evaluate antimicrobial surface designs. The aim of this review is to categorize fourteen presently available methods including industrial standard tests for the in vitro evaluation of antimicrobial surface designs according to their suitability with respect to their antimicrobial mechanism of action. There is no single method or industrial test that allows to distinguish antimicrobial designs according to all three mechanisms identified here. However, critical consideration of each method clearly relates the different methods to a specific mechanism of antimicrobial action. It is anticipated that use of the provided table with the fourteen methods will avoid the use of wrong methods for evaluating new antimicrobial designs and therewith facilitate translation of novel antimicrobial biomaterials and coatings to clinical use. The need for more and better updated industrial standard tests is emphasized.

STATEMENT OF SIGNIFICANCE

European COST-action TD1305, IPROMEDAI aims to provide better understanding of mechanisms of antimicrobial surface designs of biomaterial implants and devices. Current industrial evaluation standard tests do not sufficiently account for different, advanced antimicrobial surface designs, yet are urgently needed to obtain convincing in vitro data for approval of animal experiments and clinical trials. This review aims to provide an innovative and clear guide to choose appropriate evaluation methods for three distinctly different mechanisms of antimicrobial design: (1) antimicrobial-releasing, (2) contact-killing and (3) non-adhesivity. Use of antimicrobial evaluation methods and definition of industrial standard tests, tailored toward the antimicrobial mechanism of the design, as identified here, fulfill a missing link in the translation of novel antimicrobial surface designs to clinical use.

Design of a rotating disk reactor to assess the colonization of biofilms by free-living amoebae under high shear rates

The present study was aimed at designing and optimizing a rotating disk reactor simulating high hydrodynamic shear rates (γ), which are representative of cooling circuits. The characteristics of the hydrodynamic conditions in the reactor and the complex approach used to engineer it are described. A 60 l tank was filled with freshwater containing free-living amoebae (FLA) and bacteria. Adhesion of the bacteria and formation of a biofilm on the stainless steel coupons were observed. FLA were able to establish in these biofilms under γ as high as 85,000 s^-1. Several physical mechanisms (convection, diffusion, sedimentation) could explain the accumulation of amoeboid cells on surfaces, but further research is required to fully understand and model the fine mechanisms governing such transport under γ similar to those encountered in the industrial environment. This technological advance may enable research into these topics.

pH changes of mixed biofilms of Streptococcus mutans and Candida albicans after exposure to sucrose solutions in vitro

OBJECTIVE

This study aimed to standardize an in vitro experimental model able to reproduce the pH changes that occur in dental biofilm under in vivo conditions, using a mixed biofilm of Streptococcus mutans and Candida albicans.

DESIGN

Biofilms were developed for 96 h, and exposed to three different concentrations of sucrose (10, 20 or 30%) during 1, 3 or 5 min. The pH was measured before exposure to sucrose, immediately after its removal from the biofilms, and at 1, 3, 5 and 10 min after removal.

RESULTS

Sucrose solutions at 10 and 20% required 1 min to significantly reduce the biofilm pH, while for 30% sucrose a significant reduction was already seen immediately after its removal, even for the shortest exposure time. For an exposure of 3 min to 20% sucrose, the biofilm pH attained the critical value for hydroxyapatite dissolution when measured 1 min after sucrose removal, followed by a recovery phase.

CONCLUSIONS

A mixed biofilm of S. mutans and C. albicans exposed to a 20% sucrose solution for 3 min exhibited a pattern of pH change similar to that observed in vivo, despite at a higher speed when compared to in vivo conditions.

Mycobacterium abscessus Smooth and Rough Morphotypes Form Antimicrobial-Tolerant Biofilm Phenotypes but Are Killed by Acetic Acid

Mycobacterium abscessus has emerged as an important pathogen in people with chronic inflammatory lung diseases such as cystic fibrosis, and recent reports suggest that it may be transmissible by fomites. M. abscessus exhibits two major colony morphology variants: a smooth morphotype (Ma^Sm ) and a rough morphotype (Ma^Rg ). Biofilm formation, prolonged intracellular survival, and colony variant diversity can each contribute to the persistence of M. abscessus and other bacterial pathogens in chronic pulmonary diseases. A prevailing paradigm of chronic M. abscessus infection is that Ma^Sm is a noninvasive, biofilm-forming, persistent phenotype and Ma^Rg an invasive phenotype that is unable to form biofilms. We show that Ma^Rg is hyperaggregative and forms biofilm-like aggregates, which, like Ma^Sm biofilm aggregates, are significantly more tolerant than planktonic variants to acidic pHs, hydrogen peroxide (H₂O₂), and treatment with amikacin or azithromycin. We further show that both variants are recalcitrant to antibiotic treatment inside human macrophage-like cells and that Ma^Rg is more refractory than Ma^Sm to azithromycin. Our results indicate that biofilm-like aggregation and protracted intracellular survival may each contribute to the persistence of this problematic pathogen in the face of antimicrobial agents regardless of morphotype. Biofilms of each M. abscessus variant are rapidly killed, however, by acetic acid, which may help to prevent local fomite transmission.

A Method for Quantification of Epithelium Colonization Capacity by Pathogenic Bacteria

Most bacterial infections initiate at the mucosal epithelium lining the gastrointestinal, respiratory, and urogenital tracts. At these sites, bacterial pathogens must adhere and increase in numbers to effectively breach the outer barrier and invade the host. If the bacterium succeeds in reaching the bloodstream, effective dissemination again requires that bacteria in the blood, reestablish contact to distant endothelium sites and form secondary site foci. The infectious potential of bacteria is therefore closely linked to their ability to adhere to, colonize, and invade epithelial and endothelial surfaces. Measurement of bacterial adhesion to epithelial cells is therefore standard procedure in studies of bacterial virulence. Traditionally, such measurements have been conducted with microtiter plate cell cultures to which bacteria are added, followed by washing procedures and final quantification of retained bacteria by agar plating. This approach is fast and straightforward, but yields only a rough estimate of the adhesive properties of the bacteria upon contact, and little information on the ability of the bacterium to colonize these surfaces under relevant physiological conditions. Here, we present a method in which epithelia/endothelia are simulated by flow chamber-grown human cell layers, and infection is induced by seeding of pathogenic bacteria on these surfaces under conditions that simulate the physiological microenvironment. Quantification of bacterial adhesion and colonization of the cell layers is then performed by in situ time-lapse fluorescence microscopy and automatic detection of bacterial surface coverage. The method is demonstrated in three different infection models, simulating Staphylococcus aureus endothelial infection and Escherichia coli intestinal- and uroepithelial infection. The approach yields valuable information on the fitness of the bacterium to successfully adhere to and colonize epithelial surfaces and can be used to evaluate the influence of specific virulence genes, growth conditions, and antimicrobial treatment on this process.