Size-distribution analysis of proteins by analytical ultracentrifugation: strategies and application to model systems

Enterococcus faecalis mevalonate kinase

Gram-positive pathogens synthesize isopentenyl diphosphate, the five-carbon precursor of isoprenoids, via the mevalonate pathway. The enzymes of this pathway are essential for the survival of these organisms, and thus may represent possible targets for drug design. To extend our investigation of the mevalonate pathway in Enterococcus faecalis, we PCR-amplified and cloned into pET-28b the mvaK1 gene thought to encode mevalonate kinase, the fourth enzyme of the pathway. Following transformation of the construct EFK1-pET28b into Escherichia coli BL21(DE3) cells, the expressed C-terminally hexahistidine-tagged protein was purified on a nickel affinity support to apparent homogeneity. The purified protein catalyzed the divalent ion-dependent phosphorylation of mevalonate to mevalonate 5-phosphate. The specific activity of the purified kinase was 24 micromole/min/mg protein. Based on sedimentation velocity data, E. faecalis mevalonate kinase exists in solution primarily as a monomer with a mass of 32.2 kD. Optimal activity occurred at pH 10 and at 37 degrees C. Delta H(a) was 22 kcal/mole. Kinetic analysis suggested that the reaction proceeds via a sequential mechanism. K(m) values were 0.33 mM (mevalonate), 1.1 mM (ATP), and 3.3 mM (Mg(2+)). Unlike mammalian mevalonate kinases, E. faecalis mevalonate kinase utilized all tested nucleoside triphosphates as phosphoryl donors. ADP, but not AMP, inhibited the reaction with a K(i) of 2.7 mM.

A Comparison of the Self-association Behavior of the Plant Cyclotides Kalata B1 and Kalata B2 via Analytical Ultracentrifugation

The recently discovered cyclotides kalata B1 and kalata B2 are miniproteins containing a head-to-tail cyclized backbone and a cystine knot motif, in which disulfide bonds and the connecting backbone segments form a ring that is penetrated by the third disulfide bond. This arrangement renders the cyclotides extremely stable against thermal and enzymatic decay, making them a possible template onto which functionalities can be grafted. We have compared the hydrodynamic properties of two prototypic cyclotides, kalata B1 and kalata B2, using analytical ultracentrifugation techniques. Direct evidence for oligomerization of kalata B2 was shown by sedimentation velocity experiments in which a method for determining size distribution of polydisperse molecules in solution was employed. The shape of the oligomers appears to be spherical. Both sedimentation velocity and equilibrium experiments indicate that in phosphate buffer kalata B1 exists mainly as a monomer, even at millimolar concentrations. In contrast, at 1.6 mm, kalata B2 exists as an equilibrium mixture of monomer (30%), tetramer (42%), octamer (25%), and possibly a small proportion of higher oligomers. The results from the sedimentation equilibrium experiments show that this self-association is concentration dependent and reversible. We link our findings to the three-dimensional structures of both cyclotides, and propose two putative interaction interfaces on opposite sides of the kalata B2 molecule, one involving a hydrophobic interaction with the Phe6, and the second involving a charge-charge interaction with the Asp25 residue. An understanding of the factors affecting solution aggregation is of vital importance for future pharmaceutical application of these molecules.

Functional requirement for symmetric assembly of archaeal box C/D small ribonucleoprotein particles

Box C/D small ribonucleoprotein particles (sRNPs) are archaeal homologs of small nucleolar ribonucleoprotein particles (snoRNPs) in eukaryotes that are responsible for site specific 2'-O-methylation of ribosomal and transfer RNAs. The function of box C/D sRNPs is characterized by step-wise assembly of three core proteins around a box C/D RNA that include fibrillarin, Nop5p, and L7Ae. The most distinct structural feature in all box C/D RNAs is the presence of two conserved box C/D motifs accompanied by often a single, and sometimes two, antisense elements located immediately upstream of either the D or D' box. Despite this asymmetric distribution of antisense elements, the bipartite feature of the box C/D motifs appears to be in pleasing agreement with a recently reported three-dimensional structure of the core protein complex between fibrillarin and Nop5p. This investigates functional implications of the symmetric features both in box C/D RNAs and in the fibrillarin-Nop5p complex. Site-directed mutagenesis was employed to generate box C/D RNAs lacking one of the two box C/D motifs and a mutant fibrillarin-Nop5p complex deficient in self-association. The ability of the mutated components to assemble and to direct methyl transfer reactions was assessed by gel mobility-shift, analytical ultracentrifugation, and in vitro catalysis studies. The results presented here suggest that, while a box C/D sRNP is capable of asymmetrical assembly, the symmetries in both the box C/D RNA and in the fibrillarin-Nop5p complex are required for efficient catalysis. These findings underscore the importance of functional assembly in methyl transfer reactions.

On the analysis of protein self-association by sedimentation velocity analytical ultracentrifugation

Analytical ultracentrifugation is one of the classical techniques for the study of protein interactions and protein self-association. Recent instrumental and computational developments have significantly enhanced this methodology. In this paper, new tools for the analysis of protein self-association by sedimentation velocity are developed, their statistical properties are examined, and considerations for optimal experimental design are discussed. A traditional strategy is the analysis of the isotherm of weight-average sedimentation coefficients s(w) as a function of protein concentration. From theoretical considerations, it is shown that integration of any differential sedimentation coefficient distribution c(s), ls-g(*)(s), or g(s(*)) can give a thermodynamically well-defined isotherm, as long as it provides a good model for the sedimentation profiles. To test this condition for the g(s(*)) distribution, a back-transform into the original data space is proposed. Deconvoluting diffusion in the sedimentation coefficient distribution c(s) can be advantageous to identify species that do not participate in the association. Because of the large number of scans that can be analyzed in the c(s) approach, its s(w) values are very precise and allow extension of the isotherm to very low concentrations. For all differential sedimentation coefficients, corrections are derived for the slowing of the sedimentation boundaries caused by radial dilution. As an alternative to the interpretation of the isotherm of the weight-average s value, direct global modeling of several sedimentation experiments with Lamm equation solutions was studied. For this purpose, a new software SEDPHAT is introduced, allowing the global analysis of several sedimentation velocity and equilibrium experiments. In this approach, information from the shape of the sedimentation profiles is exploited, which permits the identification of the association scheme and requires fewer experiments to precisely characterize the association. Further, under suitable conditions, fractions of incompetent material that are not part of the reversible equilibrium can be detected.

Alanine-scanning mutations in domain 4 of anthrax toxin protective antigen reveal residues important for binding to the cellular receptor and to a neutralizing monoclonal antibody

A panel of variants with alanine substitutions in the small loop of anthrax toxin protective antigen domain 4 was created to determine individual amino acid residues critical for interactions with the cellular receptor and with a neutralizing monoclonal antibody, 14B7. Substituted protective antigen proteins were analyzed by cellular cytotoxicity assays, and their interactions with antibody were measured by plasmon surface resonance and analytical ultracentrifugation. Residue Asp683 was the most critical for cell binding and toxicity, causing an approximately 1000-fold reduction in toxicity, but was not a large factor for interactions with 14B7. Substitutions in residues Tyr681, Asn682, and Pro686 also reduced toxicity significantly, by 10-100-fold. Of these, only Asn682 and Pro686 were also critical for interactions with 14B7. However, residues Lys684, Leu685, Leu687, and Tyr688 were critical for 14B7 binding without greatly affecting toxicity. The K684A and L685A variants exhibited wild type levels of toxicity in cell culture assays; the L687A and Y688A variants were reduced only 1.5- and 5-fold, respectively.

Dimerization properties of a Xenopus laevis kinesin-II carboxy-terminal stalk fragment

We have analysed the structural and physical properties of the carboxy-terminal stalk region of a kinesin-II, Xenopus kinesin-like protein 3A/B (Xklp3A/B), which we showed to be essential for heterodimerization in a previous work (De Marco et al., 2001). We expressed the corresponding A-stalk and B-stalk fragments and investigated their modes of interaction by analytical ultracentrifugation (AUC), circular dichroism spectroscopy, denaturation assays and electron microscopy. Co-expression of the A-stalk and B-stalk produced the properly folded, hetero-dimeric coiled coil at high yields. The dimeric nature of the complex was confirmed by AUC. We also found that the isolated A-stalk fragment forms a stable helix by itself and shows a significant tendency towards homodimer and higher-order complex formation. In the absence of the corresponding A-stalk fragment, the isolated B-stalk fragment remains partially unfolded, which suggests that the A-stalk provides a template structure for the B-stalk in order to recompose the complete heterodimeric coiled coil.

Involvement of single residue tryptophan 548 in the quaternary structural stability of pigeon cytosolic malic enzyme

Pigeon cytosolic malic enzyme has a double dimer quaternary structure with three tryptophanyl residues in each monomer distributed in different structural domains. The enzyme showed a three-state unfolding phenomenon upon increasing the urea concentration (Chang, H. C., Chou, W. Y., and Chang, G. G. (2002) J. Biol. Chem. 277, 4663-4671). At urea concentration of 4-4.5 m, where the intermediate form was detected, the enzyme existed as partially unfolded dimers, which were easily polymerized. Mn2+ provided full protection against the polymerization. To further characterize this phenomenon, three mutants of the enzyme (W129, W321, and W548), each with only one tryptophanyl residue left, were constructed. All these mutants were successfully overexpressed in Escherichia coli cells and purified to homogeneity. Changes in the circular dichroism spectra of all mutants revealed a three-state urea-unfolding process in the absence of Mn2+. In the presence of 4 mm Mn2+, W548 and wild type (WT) enzymes shifted to monophasic, while W129 and W321 were still biphasic. Similar results were obtained from the fluorescence spectral changes, except for W321, which showed monophasic denaturation curve with or without Mn2+. Analytical ultracentrifugation analysis indicated that the mutant enzymes were polymerized at 4.5 m urea, and Mn2+ provided protective effect on W548 and WT enzymes only. Other mutants with mutated Trp-548 polymerized at 4.5 m urea in the absence or presence of 4 mm Mn2+. The above results indicate that a single residue, Trp-548, in the subunit interface region, is responsible for the integrity of the quaternary structure of the pigeon cytosolic malic enzyme.

Combined affinity and rate constant distributions of ligand populations from experimental surface binding kinetics and equilibria

The present article considers the influence of heterogeneity in a mobile analyte or in an immobilized ligand population on the surface binding kinetics and equilibrium isotherms. We describe strategies for solving the inverse problem of calculating two-dimensional distributions of rate and affinity constants from experimental data on surface binding kinetics, such as obtained from optical biosensors. Although the characterization of a heterogeneous population of analytes binding to uniform surface sites may be possible under suitable experimental conditions, computational difficulties currently limit this approach. In contrast, the case of uniform analytes binding to heterogeneous populations of surface sites is computationally feasible, and can be combined with Tikhonov-Phillips and maximum entropy regularization techniques that provide the simplest distribution that is consistent with the data. The properties of this ligand distribution analysis are explored with several experimental and simulated data sets. The resulting two-dimensional rate and affinity constant distributions can describe well experimental kinetic traces measured with optical biosensors. The use of kinetic surface binding data can give significantly higher resolution than affinity distributions from the binding isotherms alone. The shape and the level of detail of the calculated distributions depend on the experimental conditions, such as contact times and the concentration range of the analyte. Despite the flexibility introduced by considering surface site distributions, the impostor application of this model to surface binding data from transport limited binding processes or from analyte distributions can be identified by large residuals, if a sufficient range of analyte concentrations and contact times are used. The distribution analysis can provide a rational interpretation of complex experimental surface binding kinetics, and provides an analytical tool for probing the homogeneity of the populations of immobilized protein.

Optimization of the preparation process for human serum albumin (HSA) nanoparticles

Nanoparticles prepared by desolvation and subsequent crosslinking of human serum albumin (HSA) represent promising carriers for drug delivery. Particle size is a crucial parameter, in particular for the in vivo behaviour of nanoparticles after intravenous injection. The objective of the present study is the development of a desolvation procedure for the preparation of HSA-based nanoparticles under the aspect of a controllable particle size between 100 and 300 nm in combination with a narrow size distribution. A pump-controlled preparation method was established which enabled particle preparation under defined conditions. Several factors of the preparation process, such as the rate of addition of the desolvating agent, the pH value and the ionic composition of the HSA solution, the protein concentration, and the conditions of particle purification were evaluated. The pH value of the HSA solution prior to the desolvation procedure was identified as the major factor determining particle size. Varying this parameter, (mean) particle diameters could be adjusted between 150 and 280 nm, higher pH values leading to smaller nanoparticles. Washing the particles by differential centrifugation led to significantly narrower size distributions. The reproducibility of the particle size and particle size distribution under the proposed preparation conditions was demonstrated by sedimentation velocity analysis in the analytical ultracentrifuge and the cellular uptake of those nanoparticles was studied by confocal microscope imaging and FACS analysis. The stability of the resulting nanoparticles was evaluated by pH and buffer titration experiments. Only pH values distinctly outside the isoelectric pH range of HSA and low salt concentrations were able to prevent nanoparticle agglomeration.

VirB11 ATPases are dynamic hexameric assemblies: new insights into bacterial type IV secretion

The coupling of ATP binding/hydrolysis to macromolecular secretion systems is crucial to the pathogenicity of Gram-negative bacteria. We reported previously the structure of the ADP-bound form of the hexameric traffic VirB11 ATPase of the Helicobacter pylori type IV secretion system (named HP0525), and proposed that it functions as a gating molecule at the inner membrane, cycling through closed and open forms regulated by ATP binding/hydrolysis. Here, we combine crystal structures with analytical ultracentrifugation experiments to show that VirB11 ATPases indeed function as dynamic hexameric assemblies. In the absence of nucleotide, the N-terminal domains exhibit a collection of rigid-body conformations. Nucleotide binding 'locks' the hexamer into a symmetric and compact structure. We propose that VirB11s use the mechanical leverage generated by such nucleotide-dependent conformational changes to facilitate the export of substrates or the assembly of the type IV secretion apparatus. Biochemical characterization of mutant forms of HP0525 coupled with electron microscopy and in vivo assays support such hypothesis, and establish the relevance of VirB11s ATPases as drug targets against pathogenic bacteria.

Sedimentation velocity analysis of flexible macromolecules: self-association and tangling of amyloid fibrils

A novel bead modeling technique has been developed for the analysis of the sedimentation velocity behavior of flexible fibrils. The method involves the generation of a family of bead models representing a sample of the conformations available to the molecule and the calculation of the sedimentation coefficients of these models by established techniques. This approach has been used to investigate the size distribution of amyloid fibrils formed by human apolipoprotein C-II (apoC-II). ApoC-II fibrils have a simple and homogeneous ribbon morphology with no evidence of amorphous aggregation. Freshly prepared apoC-II forms fibrils with systematically larger sedimentation coefficients upon increasing protein concentration (modes of 100, 300, and 800 for apoC-II concentrations of 0.3, 0.7, and 1.0 mg/mL, respectively). The sedimentation coefficient distributions are not affected by rotor speed, and are not significantly changed by dilution once the fibrils are formed. The kinetics of aggregation (1 mg/mL apoC-II) as assessed using thioflavin T and preparative pelleting assays reveal that monomeric apoC-II is depleted after approximately 12 h incubation at room temperature. In contrast, the sedimentation coefficient distribution of fibrils continues to grow larger over a period of 48 h to an average value of 800 S. Calculations using the bead modeling procedure suggest maximum sedimentation coefficients for individual apoC-II fibrils to be around 100 S. The larger experimentally observed sedimentation coefficients for apoC-II fibrils indicate an extensive and time-dependent tangling or association of the fibrils to form specific networks.

Subunit assembly for DNA cleavage by restriction endonuclease SgrAI

The SgrAI endonuclease usually cleaves DNA with two recognition sites more rapidly than DNA with one site, often converting the former directly to the products cut at both sites. In this respect, SgrAI acts like the tetrameric restriction enzymes that bind two copies of their target sites before cleaving both sites concertedly. However, by analytical ultracentrifugation, SgrAI is a dimer in solution though it aggregates to high molecular mass species when bound to its specific DNA sequence. Its reaction kinetics indicate that it uses different mechanisms to cleave DNA with one and with two SgrAI sites. It cleaves the one-site DNA in the style of a dimeric restriction enzyme acting at an individual site, mediating neither interactions in trans, as seen with the tetrameric enzymes, nor subunit associations, as seen with the monomeric enzymes. In contrast, its optimal reaction on DNA with two sites involves an association of protein subunits: two dimers bound to sites in cis may associate to form a tetramer that has enhanced activity, which then cleaves both sites concurrently. The mode of action of SgrAI differs from all restriction enzymes characterised previously, so this study extends the range of mechanisms known for restriction endonucleases.

Phospholipid-induced monomerization and signal-peptide-induced oligomerization of SecA

The SecA ATPase drives the processive translocation of the N terminus of secreted proteins through the cytoplasmic membrane in eubacteria via cycles of binding and release from the SecYEG translocon coupled to ATP turnover. SecA forms a physiological dimer with a dissociation constant that has previously been shown to vary with temperature and ionic strength. We now present data showing that the oligomeric state of SecA in solution is altered by ligands that it interacts with during protein translocation. Analytical ultracentrifugation, chemical cross-linking, and fluorescence anisotropy measurements show that the physiological dimer of SecA is monomerized by long-chain phospholipid analogues. Addition of wild-type but not mutant signal sequence peptide to these SecA monomers redimerizes the protein. Physiological dimers of SecA do not change their oligomeric state when they bind signal sequence peptide in the compact, low temperature conformational state but polymerize when they bind the peptide in the domain-dissociated, high-temperature conformational state that interacts with SecYEG. This last result shows that, at least under some conditions, signal peptide interactions drive formation of new intermolecular contacts distinct from those stabilizing the physiological dimer. The observations that signal peptides promote conformationally specific oligomerization of SecA while phospholipids promote subunit dissociation suggest that the oligomeric state of SecA could change dynamically during the protein translocation reaction. Cycles of SecA subunit recruitment and dissociation could potentially be employed to achieve processivity in polypeptide transport.

Insights into the regulatory mechanism for caspase-8 activation

In the death receptor induced apoptotic pathway, caspase-8 autocatalytically cleaves itself at specific cleavage sites. To better understand the regulatory mechanisms behind caspase-8 activation, we compared active wild-type caspase-8 (wtC8) and an uncleavable form of procaspase-8 (uncleavable C8). We demonstrate that wtC8 predominantly exists as a monomer and dimerizes in a concentration and inhibitor binding-dependent fashion. The K(D) for dimeric wtC8 is approximately 50 micro M and decreases when inhibitor bound. Uncleavable C8 is mainly monomeric, but a small amount that dimerizes is as active as wtC8. Inhibitor binding does not favor dimerization but induces active site rearrangements in uncleavable C8. Our findings suggest that dimerization is the crucial factor for caspase-8 activation.

One-step purification, covalent immobilization, and additional stabilization of a thermophilic poly-His-tagged beta-galactosidase from Thermus sp. strain T2 by using novel heterofunctional chelate-epoxy Sepabeads

Using the poly-His-tagged-beta-galactosidase from Thermus sp. strain T2 overexpressed in Escherichia coli (MC1116) as a model enzyme, we have developed a strategy to purify and immobilize proteins in a single step, combining the excellent properties of epoxy groups for enzyme immobilization with the good performance of immobilized metal-chelate affinity chromatography for protein purification. The aforementioned enzyme could not be immobilized onto standard epoxy supports with good yields, and after purification and storage, it exhibited a strong trend to yield very large aggregates as shown by ultracentrifugation experiments. That preparation could not be immobilized in any support, very likely because the pores of the solid became clogged by the large aggregates. These novel epoxy-metal chelate heterofunctional supports contain a low concentration of Co(2+) chelated in IDA groups and a high density of epoxy groups. This enabled the selective adsorption of poly-His-tagged enzymes, and as this adsorption step is necessary for the covalent immobilization procedure, the selective covalent immobilization of the target enzyme could take place. This strategy allowed similar maximum loadings of the target enzyme using either pure or crude preparations of the enzyme. The enzyme derivative presented a very high activity at 70 degrees C (over 1000 IU in the hydrolysis of lactose) and very high stability and stabilization when compared to its soluble counterpart (activity remained unaltered after several days of incubation at 50 degrees C). In fact, this preparation was much more stable than when the same enzyme was immobilized onto standard epoxy Sepabeads.

Differences in the binding capacity of human apolipoprotein E3 and E4 to size-fractionated lipid emulsions

We describe sensitive new approaches for detecting and quantitating protein-lipid interactions using analytical ultracentrifugation and continuous size-distribution analysis [Schuck (2000) Biophys. J.78, 1606-1619]. The new methods were developed to investigate the binding of human apolipoprotein E (apoE) isoforms to size-fractionated lipid emulsions, and demonstrate that apoE3 binds preferentially to small lipid emulsions, whereas apoE4 exhibits a preference for large lipid particles. Although the apparent binding affinity for large emulsions is similar (Kd approximately 0.5 micro m), the maximum binding capacity for apoE4 is significantly higher than for apoE3 (3.0 and 1.8 amino acids per phospholipid, respectively). This indicates that apoE4 has a smaller binding footprint at saturation. We propose that apoE isoforms differentiate between lipid surfaces on the basis of size, and that these differences in lipid binding are due to a greater propensity of apoE4 to adopt a more compact closed conformation. Implications for the role of apoE4 in blood lipid transport and disease are discussed.

NblA from Anabaena sp. PCC 7120 is a mostly alpha-helical protein undergoing reversible trimerization in solution

The nblA family of genes encodes for small proteins necessary for the ordered degradation of phycobilisomes under certain stress conditions, a process known as chlorosis. Genes homologous to nblA seem to occur in all phycobilisome-containing organisms. However, to date, no molecular mechanism is known for the action of NblA, nor have the gene products been characterized to understand the physical properties of the molecule and thus help elucidate the mechanism on a structural basis. In this study we report on the first characterization of an NblA-homologous gene product. The chromosomal gene from the cyanobacterium Anabaena sp. PCC 7120 was cloned, heterologously expressed in Escherichia coli and purified to apparent homogeneity. This allowed the protein to be characterized by analytical ultracentrifugation and CD spectroscopy. These experiments show that the NblA protein has a mostly alpha-helical structure, undergoing an association reaction of folded monomers to form trimers in solution. No dimers are detectable.

Modern analytical ultracentrifugation in protein science: a tutorial review

Analytical ultracentrifugation (AU) is reemerging as a versatile tool for the study of proteins. Monitoring the sedimentation of macromolecules in the centrifugal field allows their hydrodynamic and thermodynamic characterization in solution, without interaction with any matrix or surface. The combination of new instrumentation and powerful computational software for data analysis has led to major advances in the characterization of proteins and protein complexes. The pace of new advancements makes it difficult for protein scientists to gain sufficient expertise to apply modern AU to their research problems. To address this problem, this review builds from the basic concepts to advanced approaches for the characterization of protein systems, and key computational and internet resources are provided. We will first explore the characterization of proteins by sedimentation velocity (SV). Determination of sedimentation coefficients allows for the modeling of the hydrodynamic shape of proteins and protein complexes. The computational treatment of SV data to resolve sedimenting components has been achieved. Hence, SV can be very useful in the identification of the oligomeric state and the stoichiometry of heterogeneous interactions. The second major part of the review covers sedimentation equilibrium (SE) of proteins, including membrane proteins and glycoproteins. This is the method of choice for molar mass determinations and the study of self-association and heterogeneous interactions, such as protein-protein, protein-nucleic acid, and protein-small molecule binding.

Enterococcus faecalis 3-hydroxy-3-methylglutaryl coenzyme A synthase, an enzyme of isopentenyl diphosphate biosynthesis

Biosynthesis of the isoprenoid precursor isopentenyl diphosphate (IPP) proceeds via two distinct pathways. Sequence comparisons and microbiological data suggest that multidrug-resistant strains of gram-positive cocci employ exclusively the mevalonate pathway for IPP biosynthesis. Bacterial mevalonate pathway enzymes therefore offer potential targets for development of active site-directed inhibitors for use as antibiotics. We used the PCR and Enterococcus faecalis genomic DNA to isolate the mvaS gene that encodes 3-hydroxy-3-methylglutaryl coenzyme A (HMG-CoA) synthase, the second enzyme of the mevalonate pathway. mvaS was expressed in Escherichia coli from a pET28 vector with an attached N-terminal histidine tag. The expressed enzyme was purified by affinity chromatography on Ni(2+)-agarose to apparent homogeneity and a specific activity of 10 micromol/min/mg. Analytical ultracentrifugation showed that the enzyme is a dimer (mass, 83.9 kDa; s(20,w), 5.3). Optimal activity occurred in 2.0 mM MgCl(2) at 37(o)C. The DeltaH(a) was 6,000 cal. The pH activity profile, optimum activity at pH 9.8, yielded a pK(a) of 8.8 for a dissociating group, presumably Glu78. The stoichiometry per monomer of acetyl-CoA binding was 1.2 +/- 0.2 and that of covalent acetylation was 0.60 +/- 0.02. The K(m) for the hydrolysis of acetyl-CoA was 10 microM. Coupled conversion of acetyl-CoA to mevalonate was demonstrated by using HMG-CoA synthase and acetoacetyl-CoA thiolase/HMG-CoA reductase from E. faecalis.

Analysis of a temperature-sensitive mutant rotavirus indicates that NSP2 octamers are the functional form of the protein

Evidence that NSP2 plays a role in packaging and replication comes from studies on tsE(1400), a rotavirus mutant with a temperature-sensitive (ts) lesion in the NSP2 gene. Cells infected with tsE and maintained at nonpermissive temperature contain few replication-assembly factories (viroplasms) or replication intermediates and produce virus particles that are mostly empty. Sequence analysis has indicated that an A152V mutation in NSP2 is responsible for the ts phenotype of tsE. To gain insight into the effect of the mutation on the octameric structure and biochemical activities of tsE NSP2, the protein was expressed in bacteria and purified to homogeneity. Analytical ultracentrifugation showed that tsE NSP2 formed octamers which, like those formed by wild-type (wt) NSP2, undergo conformational change into more compact structures upon binding of nucleotides. However, exposure to Mg(2+) and the nonpermissive temperature caused disruption of the tsE octamers and yielded the formation of polydisperse NSP2 aggregates, events not observed with wt octamers. Biochemical analysis showed that the RNA-binding, helix-destabilizing and NTPase activities of tsE NSP2 were significantly less at the nonpermissive temperature than at the permissive temperature. In contrast, these activities for wt NSP2 were higher at the nonpermissive temperature. Our results indicate that the octamer is the fully functional form of NSP2 and the form required for productive virus replication. The propensity of tsE NSP2 to form large aggregates provides a possible explanation for the inability of the protein to support packaging and/or replication in the infected cell at the nonpermissive temperature.

Biochemical and biological characterization of a dodecameric CD4-Ig fusion protein: implications for therapeutic and vaccine strategies

Drug toxicities associated with HAART lend urgency to the development of new anti-HIV therapies. Inhibition of viral replication at the entry stage of the viral life cycle is an attractive strategy because it prevents de novo infection. Soluble CD4 (sCD4), the first drug in this class, failed to suppress viral replication in vivo. At least three factors contributed to this failure: sCD4 demonstrated poor neutralizing activity against most primary isolates of HIV in vitro; it demonstrated an intrinsic capacity to enhance viral replication at low concentrations; and it exhibited a relatively short half-life in vivo. Many anti-gp120 monoclonal antibodies, including neutralizing monoclonal antibodies also enhance viral replication at suboptimal concentrations. Advances in our understanding of the events leading up to viral entry suggest strategies by which this activity can be diminished. We hypothesized that by constructing a sCD4-based molecule that is large, binds multiple gp120s simultaneously, and is highly avid toward gp120, we could remove its capacity to enhance viral entry. Here we describe the construction of a polymeric CD4-IgG1 fusion protein. The hydrodynamic radius of this molecule is approximately 12 nm. It can bind at least 10 gp120 subunits with binding kinetics that suggest a highly avid interaction toward virion-associated envelope. This protein does not enhance viral replication at suboptimal concentrations. These observations may aid in the design of new therapeutics and vaccines.