Ion-beam sculpting at nanometre length scales

Rapid fabrication and piezoelectric tuning of micro- and nanopores in single crystal quartz

We outline the fabrication of piezoelectric through-pores in crystalline quartz using a rapid micromachining process, and demonstrate piezoelectric deformation of the pore. The single-step fabrication technique combines ultraviolet (UV) laser irradiation with a thin layer of absorbing liquid in contact with the UV-transparent quartz chip. The effects of different liquid media are shown. We demonstrate that small exit pores, with diameters nearing the 193 nm laser wavelength and with a smooth periphery, can be achieved in 350 μm thick quartz wafers. Special crater features centring on the exit pores are also fabricated, and the depth of these craters are tuned. Moreover, by applying a voltage bias across the thickness of this piezoelectric wafer, we controllably contract and expand the pore diameter. We also provide a sample application of this device by piezoelectrically actuating alamethicin ion channels suspended over the deformable pore.

Sensing proteins through nanopores: fundamental to applications

Proteins subjected to an electric field and forced to pass through a nanopore induce blockades of ionic current that depend on the protein and nanopore characteristics and interactions between them. Recent advances in the analysis of these blockades have highlighted a variety of phenomena that can be used to study protein translocation and protein folding, to probe single-molecule catalytic reactions in order to obtain kinetic and thermodynamic information, and to detect protein-antibody complexes, proteins with DNA and RNA aptamers, and protein-pore interactions. Nanopore design is now well controlled, allowing the development of future biotechnologies and medicine applications.

Malachite green derivative-functionalized single nanochannel: light-and-pH dual-driven ionic gating

A highly efficient and perfectly reversible ionic gate that can be activated by pH or UV light is demonstrated. Switching between the OFF state and the ON state is mainly dependent on the surface charge transition brought about by a malachite green derivative attached to the interior surface of an ion track-etched conical nanochannel, which makes it suitable for confined spaces. Applications in electronics, actuators, and biosensors can be foreseen.

DNA translocation through a nanopore in a single-layered doped semiconductor membrane

Recently, we developed a computational model that allowed us to study the influence a semiconductor membrane has on a DNA molecule translocating through a nanopore in this membrane. Our model incorporated both the self-consistent Poisson-Nernst-Planck simulations for the electric potential of a solid state membrane immersed in an electrolyte solution together with the Brownian dynamics of the biomolecule. In this paper, we study how the applied electrolyte bias, the semiconductor membrane bias, and the semiconductor material type (n-Si or p-Si) affect the translocation dynamics of a single-stranded DNA moving through a nanopore in a single-layered semiconductor membrane. We show that the type of semiconductor material used for the membrane has a prominent effect on the biomolecule's translocation time, with DNA exhibiting much longer translocation times through the p-type membrane than through the n type at the same electrolyte and membrane potentials, while the extension of the biomolecule remains practically unchanged. In addition, we find the optimal combination for the membrane-electrolyte system's parameters to achieve the longest translocation time and largest DNA extension. With our single-layered electrically tunable membranes, the DNA translocation time can be manipulated to have an order of magnitude increase.

Recent advances in nanopore sequencing

The prospect of nanopores as a next-generation sequencing platform has been a topic of growing interest and considerable government-sponsored research for more than a decade. Oxford Nanopore Technologies recently announced the first commercial nanopore sequencing devices, to be made available by the end of 2012, while other companies (Life, Roche, and IBM) are also pursuing nanopore sequencing approaches. In this paper, the state of the art in nanopore sequencing is reviewed, focusing on the most recent contributions that have or promise to have next-generation sequencing commercial potential. We consider also the scalability of the circuitry to support multichannel arrays of nanopores in future sequencing devices, which is critical to commercial viability.

Toward detection of DNA-bound proteins using solid-state nanopores: insights from computer simulations

Through all-atom molecular dynamics simulations, we explore the use of nanopores in thin synthetic membranes for detection and identification of DNA binding proteins. Reproducing the setup of a typical experiment, we simulate electric field driven transport of DNA-bound proteins through nanopores smaller in diameter than the proteins. As model systems, we use restriction enzymes EcoRI and BamHI specifically and nonspecifically bound to a fragment of dsDNA, and streptavidin and NeutrAvidin proteins bound to dsDNA and ssDNA via a biotin linker. Our simulations elucidate the molecular mechanics of nanopore-induced rupture of a protein-DNA complex, the effective force applied to the DNA-protein bond by the electrophoretic force in a nanopore, and the role of DNA-surface interactions in the rupture process. We evaluate the ability of the nanopore ionic current and the local electrostatic potential measured by an embedded electrode to report capture of DNA, capture of a DNA-bound protein, and rupture of the DNA-protein bond. We find that changes in the strain on dsDNA can reveal the rupture of a protein-DNA complex by altering both the nanopore ionic current and the potential of the embedded electrode. Based on the results of our simulations, we suggest a new method for detection of DNA binding proteins that utilizes peeling of a nicked double strand under the electrophoretic force in a nanopore.

K(+) , Na(+) , and Mg(2+) on DNA translocation in silicon nitride nanopores

In this work, we report on how salt concentration and cation species affect DNA translocation in voltage-biased silicon nitride nanopores. The translocation of dsDNA in linear, circular, and supercoiled forms was measured in salt solutions containing KCl, NaCl, and MgCl(2) . As the KCl concentrations were decreased from 1 to 0.1 M, the time taken by a DNA molecule to pass through a nanopore was shorter and the frequency of the translocation in a folded configuration was reduced, suggesting an increase in DNA electrophoretic mobility and DNA persistence length. When the salt concentration was kept at 1 M, but replacing K(+) with Na(+) , longer DNA translocation times (t(d) ) were observed. The addition of low concentrations of MgCl(2) with 1.6 M KCl resulted in longer t(d) and an increased frequency of supercoiled DNA molecules in a branched form. These observations were consistent with the greater counterion charge screening ability of Na(+) and Mg(2+) as compared to K(+) . In addition, we demonstrated that dsDNA molecules indeed translocated through a ∼10 nm nanopore by PCR amplification and gel electrophoresis. We also compared the dependence of DNA mobility and conformation on KCl concentration and cation species measured at single molecule level by silicon nitride nanopores with existing bulk-based experimental results and theoretical predictions.

Rapid manufacturing of low-noise membranes for nanopore sensors by trans-chip illumination lithography

In recent years, the concept of nanopore sensing has matured from a proof-of-principle method to a widespread, versatile technique for the study of biomolecular properties and interactions. While traditional nanopore devices based on a nanopore in a single layer membrane supported on a silicon chip can be rapidly fabricated using standard microfabrication methods, chips with additional insulating layers beyond the membrane region can provide significantly lower noise levels, but at the expense of requiring more costly and time-consuming fabrication steps. Here we present a novel fabrication protocol that overcomes this issue by enabling rapid and reproducible manufacturing of low-noise membranes for nanopore experiments. The fabrication protocol, termed trans-chip illumination lithography, is based on illuminating a membrane-containing wafer from its backside such that a photoresist (applied on the wafer's top side) is exposed exclusively in the membrane regions. Trans-chip illumination lithography permits the local modification of membrane regions and hence the fabrication of nanopore chips containing locally patterned insulating layers. This is achieved while maintaining a well-defined area containing a single thin membrane for nanopore drilling. The trans-chip illumination lithography method achieves this without relying on separate masks, thereby eliminating time-consuming alignment steps as well as the need for a mask aligner. Using the presented approach, we demonstrate rapid and reproducible fabrication of nanopore chips that contain small (12 μm × 12 μm) free-standing silicon nitride membranes surrounded by insulating layers. The electrical noise characteristics of these nanopore chips are shown to be superior to those of simpler designs without insulating layers and comparable in quality to more complex designs that are more challenging to fabricate.

Directly observing the motion of DNA molecules near solid-state nanopores

We investigate the diffusion and the drift motion of λ DNA molecules near solid-state nanopores prior to their translocation through the nanopores using fluorescence microscopy. The radial dependence of the electric field near a nanopore generated by an applied voltage in ionic solution can be estimated quantitatively in 3D by analyzing the motion of negatively charged DNA molecules. We find that the electric field is approximately spherically symmetric around the nanopore under the conditions investigated. In addition, DNA clogging at the nanopore was directly observed. Surprisingly, the probability of the clogging event increases with increasing external bias voltage. We also find that DNA molecules clogging the nanopore reduce the electric field amplitude at the nanopore membrane surface. To better understand these experimental results, analytical method with Ohm's law and computer simulation with Poisson and Nernst-Planck (PNP) equations are used to calculate the electric field near the nanopore. These results are of great interest in both experimental and theoretical considerations of the motion of DNA molecules near voltage-biased nanopores. These findings will also contribute to the development of solid-state nanopore-based DNA sensing devices.

Mass transport through vertically aligned large diameter MWCNTs embedded in parylene

We have fabricated porous membranes using a parylene encapsulated vertically aligned forest of multi-walled carbon nanotubes (MWCNTs, about 7 nm inner diameter). The transport of charged particles in electrolyte through these membranes was studied by applying electric field and pressure. Under an electric field in the range of 4.4 × 10(4) V m(-1), electrophoresis instead of electroomosis is found to be the main mechanism for ion transport. Small molecules and 5 nm gold nanoparticles can be driven through the membranes by an electric field. However, small biomolecules, like DNA oligomers, cannot. Due to the weak electric driving force, the interactions between charged particles and the hydrophobic CNT inner surface play important roles in the transport, leading to enhanced selectivity for small molecules. Simple chemical modification on the CNT ends also induces an obvious effect on the translocation of single strand DNA oligomers and gold nanoparticles under a modest pressure (<294 Pa).

Voltage-driven transport of ions and DNA through nanocapillaries

We study the effect of salt concentration on the ionic conductance and translocation of single DNA molecules through nanocapillaries made out of quartz glass. DNA translocation experiments were performed in aqueous solution for concentrations of KCl between 10 mM and 2 M while ion conductance was characterized from 1 mM to 2 M KCl concentration. Here, we develop a model for the conductance of conical nanocapillaries taking into consideration the surface charge of the quartz glass. We demonstrate that the conductance of our nanocapillaries shows similar behavior to silicon oxide nanopores at low and high KCl concentrations. Finally, we show that DNA translocations in high KCl concentrations (400 mM-2 M) cause a reduction in the ionic current. In contrast, DNA translocations at low KCl concentrations (10-300 mM) lead to increases in the ionic current. Our new results, which until now have not been shown for nanocapillaries, can be well understood with an adapted model.

Conductance-Based Determination of Solid-State Nanopore Size and Shape: An Exploration of Performance Limits

Knowledge of nanopore size and shape is critical for many implementations of these single-molecule sensing elements. Geometry determination by fitting the electrolyte-concentration-dependence of the conductance of surface-charged, solid-state nanopores has been proposed to replace demanding electron microscope-based methods. The functional form of the conductance poses challenges for this method by restricting the number of free parameters used to characterize the nanopore. We calculated the electrolyte-dependent conductance of nanopores with an exponential-cylindrical radial profile using three free geometric parameters; this profile, itself, could not be uniquely geometry-optimized by the conductance. Several different structurally simplified models, however, generated quantitative agreement with the conductance, but with errors exceeding 40% for estimates of key geometrical parameters. A tractable conical-cylindrical model afforded a good characterization of the nanopore size and shape, with errors of less than 1% for the limiting radius. Understanding these performance limits provides a basis for using and extending analytical nanopore conductance models.

DNA sequencing and bar-coding using solid-state nanopores

Nanopores have emerged as a prominent single-molecule analytic tool with particular promise for genomic applications. In this review, we discuss two potential applications of the nanopore sensors: First, we present a nanopore-based single-molecule DNA sequencing method that utilizes optical detection for massively parallel throughput. Second, we describe a method by which nanopores can be used as single-molecule genotyping tools. For DNA sequencing, the distinction among the four types of DNA nucleobases is achieved by employing a biochemical procedure for DNA expansion. In this approach, each nucleobase in each DNA strand is converted into one of four predefined unique 16-mers in a process that preserves the nucleobase sequence. The resulting converted strands are then hybridized to a library of four molecular beacons, each carrying a unique fluorophore tag, that are perfect complements to the 16-mers used for conversion. Solid-state nanopores are then used to sequentially remove these beacons, one after the other, leading to a series of photon bursts in four colors that can be optically detected. Single-molecule genotyping is achieved by tagging the DNA fragments with γ-modified synthetic peptide nucleic acid probes coupled to an electronic characterization of the complexes using solid-state nanopores. This method can be used to identify and differentiate genes with a high level of sequence similarity at the single-molecule level, but different pathology or response to treatment. We will illustrate this method by differentiating the pol gene for two highly similar human immunodeficiency virus subtypes, paving the way for a novel diagnostics platform for viral classification.

Rapid and label-free single-nucleotide discrimination via an integrative nanoparticle-nanopore approach

Single-nucleotide polymorphism (SNP) is an important biomarker for disease diagnosis, treatment monitoring, and development of personalized medicine. Recent works focused primarily on ultrasensitive detection, while the need for rapid and label-free single-nucleotide discrimination techniques, which are crucial criteria for translation into clinical applications, remains relatively unexplored. In this work, we developed a novel SNP detection assay that integrates two complementary nanotechnology systems, namely, a highly selective nanoparticle-DNA detection system and a single-particle sensitive nanopore readout platform, for rapid detection of single-site mutations. Discrete nanoparticle-DNA structures formed in the presence of perfectly matched (PM) or single-mismatched (SM) targets exhibited distinct size differences, which were resolved on a size-tunable nanopore platform to generate corresponding "yes/no" readout signals. Leveraging the in situ reaction monitoring capability of the nanopore platform, we demonstrated that real-time single-nucleotide discrimination of a model G487A mutation, responsible for glucose-6-phosphate dehydrogenase deficiency, can be achieved within 30 min with no false positives. Semiquantification of DNA samples down to picomolar concentration was carried out using a simple parameter of particle count without the need for sample labeling or signal amplification. The unique combination of nanoparticle-based detection and nanopore readout presented in this work brings forth a rapid, specific, yet simple biosensing strategy that can potentially be developed for point-of-care application.

Precise control of the size and noise of solid-state nanopores using high electric fields

We present a methodology for preparing silicon nitride nanopores that provides in situ control of size with sub-nanometer precision while simultaneously reducing electrical noise by up to three orders of magnitude through the cyclic application of high electric fields in an aqueous environment. Over 90% of nanopores treated with this technique display desirable noise characteristics and readily exhibit translocation of double-stranded DNA molecules. Furthermore, previously used nanopores with degraded electrical properties can be rejuvenated and used for further single-molecule experiments.

Fabrication and characterization of solid-state nanopore arrays for high-throughput DNA sequencing

We report the fabrication and characterization of uniformly sized nanopore arrays, integrated into an optical detection system for high-throughput DNA sequencing applications. Nanopore arrays were fabricated using focused ion beam milling, followed by TiO(2) coating using atomic layer deposition. The TiO(2) layer decreases the initial pore diameter down to the sub-10 nm range, compatible with the requirements for nanopore-based sequencing using optical readout. We find that the TiO(2) layers produce a lower photoluminescence background as compared with the more widely used Al(2)O(3) coatings. The functionality of the nanopore array was demonstrated by the simultaneous optical detection of DNA-quantum dot conjugates, which were electro-kinetically driven through the nanopores. Our optical scheme employs total internal reflection fluorescence microscopy to illuminate a wide area of the TiO(2)-coated membrane. A highly parallel system for observing DNA capture events in a uniformly sized 6 × 6 nanopore array was experimentally realized.

Nanochannels preparation and application in biosensing

Selective transport in nanochannels (protein-based ion channels) is already used in living systems for electrical signaling in nerves and muscles, and this natural behavior is being approached for the application of biomimetic nanochannels in biosensors. On the basis of this principle, single nanochannels and nanochannel arrays seem to bring new advantages for biosensor development and applications. The purpose of this review is to provide a general comprehensive and critical overview on the latest trends in the development of nanochannel-based biosensing systems. A detailed description and discussion of representative and recent works covering the main nanochannel fabrication techniques, nanoporous material characterizations, and especially their application in both electrochemical and optical sensing systems is given. The state-of-the-art of the developed technology may open the way to new advances in the integration of nanochannels with (bio)molecules and synthetic receptors for the development of novel biodetection systems that can be extended to many other applications with interest for clinical analysis, safety, and security as well as environmental and other industrial studies and applications.

Voltage-driven translocation of DNA through a high throughput conical solid-state nanopore

Nanopores have become an important tool for molecule detection at single molecular level. With the development of fabrication technology, synthesized solid-state membranes are promising candidate substrates in respect of their exceptional robustness and controllable size and shape. Here, a 30-60 (tip-base) nm conical nanopore fabricated in 100 nm thick silicon nitride (Si(3)N(4)) membrane by focused ion beam (FIB) has been employed for the analysis of λ-DNA translocations at different voltage biases from 200 to 450 mV. The distributions of translocation time and current blockage, as well as the events frequencies as a function of voltage are investigated. Similar to previously published work, the presence and configurations of λ-DNA molecules are characterized, also, we find that greater applied voltages markedly increase the events rate, and stretch the coiled λ-DNA molecules into linear form. However, compared to 6-30 nm ultrathin solid-state nanopores, a threshold voltage of 181 mV is found to be necessary to drive DNA molecules through the nanopore due to conical shape and length of the pore. The speed is slowed down ∼5 times, while the capture radius is ∼2 fold larger. The results show that the large nanopore in thick membrane with an improved stability and throughput also has the ability to detect the molecules at a single molecular level, as well as slows down the velocity of molecules passing through the pore. This work will provide more motivations for the development of nanopores as a Multi-functional sensor for a wide range of biopolymers and nano materials.

Polymer translocation under time-dependent driving forces: resonant activation induced by attractive polymer-pore interactions

We study the driven translocation of polymers under time-dependent driving forces using N-particle Langevin dynamics simulations. We consider the force to be either sinusoidally oscillating in time or dichotomic noise with exponential correlation time, to mimic both plausible experimental setups and naturally occurring biological conditions. In addition, we consider both the case of purely repulsive polymer-pore interactions and the case with additional attractive polymer-pore interactions, typically occurring inside biological pores. We find that the nature of the interaction fundamentally affects the translocation dynamics. For the non-attractive pore, the translocation time crosses over to a fast translocation regime as the frequency of the driving force decreases. In the attractive pore case, because of a free energy well induced inside the pore, the translocation time can be a minimum at the optimal frequency of the force, the so-called resonant activation. In the latter case, we examine the effect of various physical parameters on the resonant activation, and explain our observations using simple theoretical arguments.

Polystyrene particles reveal pore substructure as they translocate

In this article, we report resistive-pulse sensing experiments with cylindrical track-etched PET pores, which reveal that the diameters of these pores fluctuate along their length. The resistive pulses generated by polymer spheres passing through these pores have a repeatable pattern of large variations corresponding to these diameter changes. We show that this pattern of variations enables the unambiguous resolution of multiple particles simultaneously in the pore, that it can detect transient sticking of particles within the pore, and that it can confirm whether any individual particle completely translocates the pore. We demonstrate that nonionic surfactant has a significant impact on particle velocity, with the velocity decreasing by an order of magnitude for a similar increase in surfactant concentration. We also show that these pores can differentiate by particle size and charge, and we explore the influence of electrophoresis, electroosmosis, and pore size on particle motion. These results have practical importance for increasing the speed of resistive-pulse sensing, optimizing the detection of specific analytes, and identifying particle shapes.

Fast and automatic processing of multi-level events in nanopore translocation experiments

We have developed a method to analyze in detail, translocation events providing a novel and flexible tool for data analysis of nanopore experiments. Our program, called OpenNanopore, is based on the cumulative sums algorithm (CUSUM algorithm). This algorithm is an abrupt change detection algorithm that provides fitting of current blockages, allowing the user to easily identify the different levels in each event. Our method detects events using adaptive thresholds that adapt to low-frequency variations in the baseline. After event identification, our method uses the CUSUM algorithm to fit the levels inside every event and automatically extracts their time and amplitude information. This facilitates the statistical analysis of an event population with a given number of levels. The obtained information improves the interpretation of interactions between the molecule and nanopore. Since our program does not require any prior information about the analyzed molecules, novel molecule-nanopore interactions can be characterized. In addition our program is very fast and stable. With the progress in fabrication and control of the translocation speed, in the near future, our program could be useful in identification of the different bases of DNA.

Detecting and characterizing individual molecules with single nanopores

Single-nanometer-scale pores have demonstrated the capability for the detection, identification, and characterization of individual molecules. This measurement method could soon extend the existing commercial instrumentation or provide solutions to niche applications in many fields, including health care and the basic sciences. However, that paradigm shift requires a significantly better understanding of the physics and chemistry that govern the interactions between nanopores and analytes. We describe herein some of our methods and approaches to address this issue.

Single-particle characterization of Aβ oligomers in solution

Determining the pathological role of amyloids in amyloid-associated diseases will require a method for characterizing the dynamic distributions in size and shape of amyloid oligomers with high resolution. Here, we explored the potential of resistive-pulse sensing through lipid bilayer-coated nanopores to measure the size of individual amyloid-β oligomers directly in solution and without chemical modification. This method classified individual amyloid-β aggregates as spherical oligomers, protofibrils, or mature fibers and made it possible to account for the large heterogeneity of amyloid-β aggregate sizes. The approach revealed the distribution of protofibrillar lengths (12- to 155 -mer) as well as the average cross-sectional area of protofibrils and fibers.

Importance of electroosmotic flow and multiple ionic species on the electrophoresis of a rigid sphere in a charge-regulated zwitterionic cylindrical pore

The influence of electroosmotic flow (EOF) on the electrophoretic behavior of a particle is investigated by considering a rigid sphere in a charge-regulated, zwitterionic cylindrical pore filled with an aqueous solution containing multiple ionic species. This extends conventional analyses to a more general and realistic case. Taking a pore with pK(a) = 7 and pK(b) = 2 (point of zero charge is pH = 2.5) filled with an aqueous NaCl solution as an example, several interesting results are observed. For instance, if pH < 5.5, the particle mobility is influenced mainly by boundary effect, and is influenced by both EOF and boundary effects if pH ≥ 5.5. If pH is sufficiently high, the particle behavior is dominated by EOF, which might alter the direction of electrophoresis. The ratio of (pore radius/particle radius) influences not only the boundary effect, but also the strength of EOF. If the boundary effect is insignificant, the mobility varies roughly linearly with log(bulk salt concentration). These findings are of practical significance to both the interpretation of experimental data and the design of electrophoresis devices.

Solid-state nanopores for biosensing with submolecular resolution

Biological cell membranes contain various types of ion channels and transmembrane pores in the 1–100 nm range, which are vital for cellular function. Individual channels can be probed electrically, as demonstrated by Neher and Sakmann in 1976 using the patch-clamp technique [Neher and Sakmann (1976) Nature 260, 799–802]. Since the 1990s, this work has inspired the use of protein or solid-state nanopores as inexpensive and ultrafast sensors for the detection of biomolecules, including DNA, RNA and proteins, but with particular focus on DNA sequencing. Solid-state nanopores in particular have the advantage that the pore size can be tailored to the analyte in question and that they can be modified using semi-conductor processing technology. This establishes solid-state nanopores as a new class of single-molecule biosensor devices, in some cases with submolecular resolution. In the present review, we discuss a few of the most important recent developments in this field and how they might be applied to studying protein–protein and protein–DNA interactions or in the context of ultra-fast DNA sequencing.

Trapping DNA near a solid-state nanopore

We demonstrate that voltage-biased solid-state nanopores can transiently localize DNA in an electrolyte solution. A double-stranded DNA (dsDNA) molecule is trapped when the electric field near the nanopore attracts and immobilizes a non-end segment of the molecule across the nanopore orifice without inducing a folded molecule translocation. In this demonstration of the phenomenon, the ionic current through the nanopore decreases when the dsDNA molecule is trapped by the nanopore. By contrast, a translocating dsDNA molecule under the same conditions causes an ionic current increase. We also present finite-element modeling results that predict this behavior for the conditions of the experiment.

Effective driving force applied on DNA inside a solid-state nanopore

A detailed understanding of the origin of the electrophoretic force on DNA molecules in a solid-state nanopore is important for the development of nanopore-based sequencing technologies. Because of the discrepancies between recent attempts to predict this force and both direct and indirect experimental measurements, this topic has been the focus of much recent discussion. We show that the force is predictable to very good accuracy if all of the experimental conditions are accounted for properly. To resolve this issue, we compare the calculation efficiency and accuracy of numerical solutions of Poisson-Boltzmann and Poisson-Nernst-Planck descriptions of electrolyte behavior in the nanopore in the presence of DNA molecules. Two geometries--axially symmetric and cross-sectional--are compared and shown to be compatible. Numerical solutions are carried out on a sufficiently fine mesh to evaluate the viscous drag force acting on DNA inside a silicon nitride nanopore. By assuming the DNA is immobilized in the axial center of the nanopore, the calculation result of this viscous drag force is found to be rather larger than the experimental result. Because the viscous drag force decreases if DNA is closer to the surface of the nanopore, however, the relevant effective driving force is the average over all possible positions of the DNA in the nanopore. When this positional uncertainty is taken into account, the effective driving force acting on DNA inside the nanopore is found to agree very well with the experimental results.

Nanopores: A journey towards DNA sequencing

Much more than ever, nucleic acids are recognized as key building blocks in many of life's processes, and the science of studying these molecular wonders at the single-molecule level is thriving. A new method of doing so has been introduced in the mid 1990's. This method is exceedingly simple: a nanoscale pore that spans across an impermeable thin membrane is placed between two chambers that contain an electrolyte, and voltage is applied across the membrane using two electrodes. These conditions lead to a steady stream of ion flow across the pore. Nucleic acid molecules in solution can be driven through the pore, and structural features of the biomolecules are observed as measurable changes in the trans-membrane ion current. In essence, a nanopore is a high-throughput ion microscope and a single-molecule force apparatus. Nanopores are taking center stage as a tool that promises to read a DNA sequence, and this promise has resulted in overwhelming academic, industrial, and national interest. Regardless of the fate of future nanopore applications, in the process of this 16-year-long exploration, many studies have validated the indispensability of nanopores in the toolkit of single-molecule biophysics. This review surveys past and current studies related to nucleic acid biophysics, and will hopefully provoke a discussion of immediate and future prospects for the field.

3D nanofluidic channels shaped by electron-beam-induced etching

In-plane nanofluidic channels with 3D topography are fabricated. Nanochannel masters are written by electron beam lithography in SU-8 resist and shaped by electron-beam-induced etching (EBIE) with water as the precursor gas. Nanofunnel replicas cast from unmodified and EBIE-modified masters show that the funnel tip dimensions decrease from a 150-nm depth and 80-nm width to a 70-nm depth and 40-nm width.

Nanometer-thin solid-state nanopores by cold ion beam sculpting

Recent work on protein nanopores indicates that single molecule characterization (including DNA sequencing) is possible when the length of the nanopore constriction is about a nanometer. Solid-state nanopores offer advantages in stability and tunability, but a scalable method for creating nanometer-thin solid-state pores has yet to be demonstrated. Here we demonstrate that solid-state nanopores with nanometer-thin constrictions can be produced by "cold ion beam sculpting," an original method that is broadly applicable to many materials, is easily scalable, and requires only modest instrumentation.

Electrical detection of single pollen allergen particles using electrode-embedded microchannels

We report on the development of a microfluidic system for the electrical detection of single pollen allergen particles. Our device consists of 500 nm electrode gaps fabricated in an 800 nm wide fluidic channel. We flowed pollen allergen particles of average size 330 nm along the channel via fluid pumping and simultaneously monitored temporal change in dc current flowing through the sensing electrodes. Current spikes were detected, which can be attributed to a capacitance discharging upon trapping/detrapping of single allergens in the electrode gap. This sensing mechanism may open new avenues for a highly sensitive pollen allergen sensor.