Highly Dynamic Ligand Binding and Light Absorption Coefficient of Cesium Lead Bromide Perovskite Nanocrystals

Low temperature photoluminescence properties of CsPbBr3 quantum dots embedded in glasses

Size dependence of exciton activation energy, electron–phonon coupling strength, and thermal expansion of the bandgap of CsPbBr₃ QDs were studied.

Organic Cations Might Not Be Essential to the Remarkable Properties of Band Edge Carriers in Lead Halide Perovskites

A charge carrier in a lead halide perovskite lattice is protected as a large polaron responsible for the remarkable photophysical properties, irrespective of the cation type. All-inorganic-based APbX₃ perovskites may mitigate the stability problem for their applications in solar cells and other optoelectronics.

Growth and characterization of all-inorganic lead halide perovskite semiconductor CsPbBr3 single crystals

The crystal structure transforms from orthorhombic to tetragonal at 88 °C and then to cubic at 130 °C.

One-pot scalable synthesis of all-inorganic perovskite nanocrystals with tunable morphology, composition and photoluminescence

Tuning the morphology, composition and photoluminescence emission over almost the entire visible region of all-inorganic cesium lead halide nanocrystals by a general and facile one-pot synthetic approach.

Engineering Interfacial Charge Transfer in CsPbBr3 Perovskite Nanocrystals by Heterovalent Doping

Since compelling device efficiencies of perovskite solar cells have been achieved, investigative efforts have turned to understand other key challenges in these systems, such as engineering interfacial energy-level alignment and charge transfer (CT). However, these types of studies on perovskite thin-film devices are impeded by the morphological and compositional heterogeneity of the films and their ill-defined surfaces. Here, we use well-defined ligand-protected perovskite nanocrystals (NCs) as model systems to elucidate the role of heterovalent doping on charge-carrier dynamics and energy level alignment at the interface of perovskite NCs with molecular acceptors. More specifically, we develop an in situ doping approach for colloidal CsPbBr₃ perovskite NCs with heterovalent Bi³⁺ ions by hot injection to precisely tune their band structure and excited-state dynamics. This synthetic method allowed us to map the impact of doping on CT from the NCs to different molecular acceptors. Using time-resolved spectroscopy with broadband capability, we clearly demonstrate that CT at the interface of NCs can be tuned and promoted by metal ion doping. We found that doping increases the energy difference between states of the molecular acceptor and the donor moieties, subsequently facilitating the interfacial CT process. This work highlights the key variable components not only for promoting interfacial CT in perovskites, but also for establishing a higher degree of precision and control over the surface and the interface of perovskite molecular acceptors.

Encapsulation of Perovskite Nanocrystals into Macroscale Polymer Matrices: Enhanced Stability and Polarization

Lead halide perovskites hold promise for photonic devices, due to their superior optoelectronic properties. However, their use is limited by poor stability and toxicity. We demonstrate enhanced water and light stability of high-surface-area colloidal perovskite nanocrystals by encapsulation of colloidal CsPbBr₃ quantum dots into matched hydrophobic macroscale polymeric matrices. This is achieved by mixing the quantum dots with presynthesized high-molecular-weight polymers. We monitor the photoluminescence quantum yield of the perovskite-polymer nanocomposite films under water-soaking for the first time, finding no change even after >4 months of continuous immersion in water. Furthermore, photostability is greatly enhanced in the macroscale polymer-encapsulated nanocrystal perovskites, which sustain >10¹⁰ absorption events per quantum dot prior to photodegradation, a significant threshold for potential device use. Control of the quantum dot shape in these thin-film polymer composite enables color tunability via strong quantum-confinement in nanoplates and significant room temperature polarized emission from perovskite nanowires. Not only does the high-molecular-weight polymer protect the perovskites from the environment but also no escaped lead was detected in water that was in contact with the encapsulated perovskites for months. Our ligand-passivated perovskite-macroscale polymer composites provide a robust platform for diverse photonic applications.

Photon Driven Transformation of Cesium Lead Halide Perovskites from Few-Monolayer Nanoplatelets to Bulk Phase

Influence of light exposure on cesium lead halide nanostructures has been explored. A discovery of photon driven transformation (PDT) in 2D CsPbBr₃ nanoplatelets is reported, in which the quantum-confined few-monolayer nanoplatelets will convert to bulk phase under very low irradiation intensity (≈20 mW cm^-2 ). Benefiting from the remarkable emission color change during PDT, the multicolor luminescence photopatterns and facile information photo-encoding are established.

Long-term stable stacked CsPbBr3 quantum dot films for highly efficient white light generation in LEDs

We report highly efficient ethyl cellulose with CsPbBr₃ perovskite QD films for white light generation in LED application. Ethyl cellulose with CsPbBr₃ quantum dots is applied with Sr₂Si₅N₈ : Eu²⁺ red phosphor on an InGaN blue chip, achieving a highly efficient luminous efficacy of 67.93 lm W^-1 under 20 mA current.

Efficient and Stable White LEDs with Silica-Coated Inorganic Perovskite Quantum Dots

A white light-emitting diode (0.33, 0.33) is fabricated using perovskite quantum dot/silica composites. It is shown to have greatly improved stability.

Monochromatic and electrochemically switchable electrochemiluminescence of perovskite CsPbBr3 nanocrystals

Cubic-shaped perovskite CsPbBr₃ nanocrystals (NCs) could be electrochemically injected with holes (or electrons) to produce several charged states under different oxidizing and reducing potentials, and then bring out electrochemiluminescence (ECL) of higher color purity than traditional ECL chemicals and metal chalcogenide NCs, in both annihilation and co-reactant routes. The difference of electrochemical gaps between varied hole and electron injecting potentials displayed little effect on the ECL spectrum and colour purity of CsPbBr₃ NCs. All the excited states generated under different oxidizing and reducing potential couples in ECL of CsPbBr₃ NCs were the same as those in photoluminescence, as all the ECL spectra were almost identical to the CsPbBr₃ NCs' photoluminescence spectrum. Importantly, the ECL of CsPbBr₃ NCs was electrochemically switchable and displayed an obvious "on/off" type feature by changing the sequence of hole injecting and electron injecting processes, as strong ECL could be obtained by injecting holes onto the electron injected NCs, while no or very weak ECL was obtained in the reversed way.

Direct Observation of Band Structure Modifications in Nanocrystals of CsPbBr3 Perovskite

We investigate the variation of the bandgap energy of single quantum dots of CsPbBr₃ inorganic halide perovskite as a function of size and shape and upon embedding within an ensemble. For that purpose, we make use of valence-loss electron spectroscopy with Z-contrast annular dark-field (ADF) imaging in a state-of-the-art low-voltage monochromatic scanning transmission electron microscope. In the experiment, energy absorption is directly mapped onto individual quantum dots, whose dimensions and location are simultaneously measured to the highest precision. In that way, we establish an intimate relation between quantum dot size and even shape and its bandgap energy on a single object level. We explicitly follow the bandgap increase in smaller quantum dots due to quantum confinement and demonstrate that it is predominantly governed by the smallest of the three edges of the cuboidal perovskite dot. We also show the presence of an effective coupling between proximal dots in an ensemble, leading to band structure modification. These unique insights are directly relevant to the development of custom-designed quantum structures and solids which will be realized by purposeful assemblage of individually characterized and selected quantum dots, serving as building blocks.

Polyhedral Oligomeric Silsesquioxane Enhances the Brightness of Perovskite Nanocrystal-Based Green Light-Emitting Devices

The beneficial role of the insulating material polyhedral oligomeric silsesquioxane (POSS) as a solution additive or an additional hole-blocking layer to enhance the performance of electroluminescent green light-emitting devices (LEDs) based on CsPbBr₃ perovskite nanocrystals is demonstrated. POSS improves the surface coverage and the morphological features of the films deposited either from supernatant or suspension of perovskite nanocrystals. The external quantum efficiency and the luminance efficiency of LEDs with an additional POSS layer reach 0.35% and 1.20 cd/A, respectively, constituting a more than 17-fold enhancement to the reference devices without POSS; the LED peak luminance reaches 2983 cd/m², and the device stability is improved. The POSS acts as a hole-blocking layer between the perovskite nanocrystals and TPBi, keeping both electrons and holes located within the active layer for an efficient recombination.

Jonathan De Roo

"My first experiment was an absolute failure. The glassware broke and a thermometer was destroyed. The best advice I have ever been given is to stop bothering about things you cannot influence." This and more about Jonathan De Roo can be found on page 1137.

Monodisperse Formamidinium Lead Bromide Nanocrystals with Bright and Stable Green Photoluminescence

Bright green emitters with adjustable photoluminescence (PL) maxima in the range of 530–535 nm and full-width at half-maxima (fwhm) of <25 nm are particularly desirable for applications in television displays and related technologies. Toward this goal, we have developed a facile synthesis of highly monodisperse, cubic-shaped formamidinium lead bromide nanocrystals (FAPbBr₃ NCs) with perovskite crystal structure, tunable PL in the range of 470–540 nm by adjusting the nanocrystal size (5–12 nm), high quantum yield (QY) of up to 85% and PL fwhm of <22 nm. High QYs are also retained in films of FAPbBr₃ NCs. In addition, these films exhibit low thresholds of 14 ± 2 μJ cm^–2 for amplified spontaneous emission.

Observation of Quantum Confinement in Monodisperse Methylammonium Lead Halide Perovskite Nanocrystals Embedded in Mesoporous Silica

Hybrid organic-inorganic metal halide perovskites have fascinating electronic properties and have already been implemented in various devices. Although the behavior of bulk metal halide perovskites has been widely studied, the properties of perovskite nanocrystals are less well-understood because synthesizing them is still very challenging, in part because of stability. Here we demonstrate a simple and versatile method to grow monodisperse CH₃NH₃PbBr_xI_x-3 perovskite nanocrystals inside mesoporous silica templates. The size of the nanocrystal is governed by the pore size of the templates (3.3, 3.7, 4.2, 6.2, and 7.1 nm). In-depth structural analysis shows that the nanocrystals maintain the perovskite crystal structure, but it is slightly distorted. Quantum confinement was observed by tuning the size of the particles via the template. This approach provides an additional route to tune the optical bandgap of the nanocrystal. The level of quantum confinement was modeled taking into account the dimensions of the rod-shaped nanocrystals and their close packing inside the channels of the template. Photoluminescence measurements on CH₃NH₃PbBr clearly show a shift from green to blue as the pore size is decreased. Synthesizing perovskite nanostructures in templates improves their stability and enables tunable electronic properties via quantum confinement. These structures may be useful as reference materials for comparison with other perovskites, or as functional materials in all solid-state light-emitting diodes.

Highly Efficient Perovskite-Quantum-Dot Light-Emitting Diodes by Surface Engineering

A two-step ligand-exchange strategy is developed, in which the long-carbon- chain ligands on all-inorganic perovskite (CsPbX₃ , X = Br, Cl) quantum dots (QDs) are replaced with halide-ion-pair ligands. Green and blue light-emitting diodes made from the halide-ion-pair-capped quantum dots exhibit high external quantum efficiencies compared with the untreated QDs.

Ultrathin Colloidal Cesium Lead Halide Perovskite Nanowires

Highly uniform single crystal ultrathin CsPbBr₃ nanowires (NWs) with diameter of 2.2 ± 0.2 nm and length up to several microns were successfully synthesized and purified using a catalyst-free colloidal synthesis method followed by a stepwise purification strategy. The NWs have bright photoluminescence (PL) with a photoluminescence quantum yield (PLQY) of about 30% after surface treatment. Large blue-shifted UV-vis absorption and PL spectra have been observed due to strong two-dimensional quantum confinement effects. A small angle X-ray scattering (SAXS) pattern shows the periodic packing of the ultrathin NWs along the radial direction, demonstrates the narrow radial distribution of the wires, and emphasizes the deep intercalation of the surfactants. Despite the extreme aspect ratios of the ultrathin NWs, their composition and the resulting optical properties can be readily tuned by an anion-exchange reaction with good morphology preservation. These bright ultrathin NWs may be used as a model system to study strong quantum confinement effects in a one-dimensional halide perovskite system.

Harnessing Defect-Tolerance at the Nanoscale: Highly Luminescent Lead Halide Perovskite Nanocrystals in Mesoporous Silica Matrixes

Colloidal lead halide perovskite nanocrystals (NCs) have recently emerged as a novel class of bright emitters with pure colors spanning the entire visible spectral range. Contrary to conventional quantum dots, such as CdSe and InP NCs, perovskite NCs feature unusual, defect-tolerant photophysics. Specifically, surface dangling bonds and intrinsic point defects such as vacancies do not form midgap states, known to trap carriers and thereby quench photoluminescence (PL). Accordingly, perovskite NCs need not be electronically surface-passivated (with, for instance, ligands and wider-gap materials) and do not noticeably suffer from photo-oxidation. Novel opportunities for their preparation therefore can be envisaged. Herein, we show that the infiltration of perovskite precursor solutions into the pores of mesoporous silica, followed by drying, leads to the template-assisted formation of perovskite NCs. The most striking outcome of this simple methodology is very bright PL with quantum efficiencies exceeding 50%. This facile strategy can be applied to a large variety of perovskite compounds, hybrid and fully inorganic, with the general formula APbX3, where A is cesium (Cs), methylammonium (MA), or formamidinium (FA), and X is Cl, Br, I or a mixture thereof. The luminescent properties of the resulting templated NCs can be tuned by both quantum size effects as well as composition. Also exhibiting intrinsic haze due to scattering within the composite, such materials may find applications as replacements for conventional phosphors in liquid-crystal television display technologies and in related luminescence down-conversion-based devices.

Insight into the Ligand-Mediated Synthesis of Colloidal CsPbBr3 Perovskite Nanocrystals: The Role of Organic Acid, Base, and Cesium Precursors

While convenient solution-based procedures have been realized for the synthesis of colloidal perovskite nanocrystals, the impact of surfactant ligands on the shape, size, and surface properties still remains poorly understood, which calls for a more detailed structure-morphology study. Herein we have systematically varied the hydrocarbon chain composition of carboxylic acids and amines to investigate the surface chemistry and the independent impact of acid and amine on the size and shape of perovskite nanocrystals. Solution phase studies on purified nanocrystal samples by (1)H NMR and IR spectroscopies have confirmed the presence of both carboxylate and alkylammonium ligands on surfaces, with the alkylammonium ligand being much more mobile and susceptible to detachment from the nanocrystal surfaces during polar solvent washes. Moreover, the chain length variation of carboxylic acids and amines, ranging from 18 carbons down to two carbons, has shown independent correlation to the size and shape of nanocrystals in addition to the temperature effect. We have additionally demonstrated that employing a more soluble cesium acetate precursor in place of the universally used Cs2CO3 results in enhanced processability without sacrificing optical properties, thus offering a more versatile recipe for perovskite nanocrystal synthesis that allows the use of organic acids and amines bearing chains shorter than eight carbon atoms. Overall our studies have shed light on the influence of ligand chemistry on crystal growth and stabilization of the nanocrystals, which opens the door to functionalizable perovskite nanocrsytals through surface ligand manipulation.

Polymer-Enhanced Stability of Inorganic Perovskite Nanocrystals and Their Application in Color Conversion LEDs

Cesium lead halide (CsPbX3, X = Cl, Br, I) nanocrystals (NCs) offer exceptional optical properties for several potential applications but their implementation is hindered by a low chemical and structural stability and limited processability. In the present work, we developed a new method to efficiently coat CsPbX3 NCs, which resulted in their increased chemical and optical stability as well as processability. The method is based on the incorporation of poly(maleic anhydride-alt-1-octadecene) (PMA) into the synthesis of the perovskite NCs. The presence of PMA in the ligand shell stabilizes the NCs by tightening the ligand binding, limiting in this way the NC surface interaction with the surrounding media. We further show that these NCs can be embedded in self-standing silicone/glass plates as down-conversion filters for the fabrication of monochromatic green and white light emitting diodes (LEDs) with narrow bandwidths and appealing color characteristics.

Photoluminescence Blinking of Single-Crystal Methylammonium Lead Iodide Perovskite Nanorods Induced by Surface Traps

Photoluminescence (PL) of organometal halide perovskite materials reflects the charge dynamics inside of the material and thus contains important information for understanding the electro-optical properties of the material. Interpretation of PL blinking of methylammonium lead iodide (MAPbI₃) nanostructures observed on polycrystalline samples remains puzzling owing to their intrinsic disordered nature. Here, we report a novel method for the synthesis of high-quality single-crystal MAPbI₃ nanorods and demonstrate a single-crystal study on MAPbI₃ PL blinking. At low excitation power densities, two-state blinking was found on individual nanorods with dimensions of several hundred nanometers. A super-resolution localization study on the blinking of individual nanorods showed that single crystals of several hundred nanometers emit and blink as a whole, without showing changes in the localization center over the crystal. Moreover, both the blinking ON and OFF times showed power-law distributions, indicating trapping-detrapping processes. This is further supported by the PL decay times of the individual nanorods, which were found to correlate with the ON/OFF states. Furthermore, a strong environmental dependence of the nanorod PL blinking was revealed by comparing the measurements in vacuum, nitrogen, and air, implying that traps locate close to crystal surfaces. We explain our observations by proposing surface charge traps that are likely related to under-coordinated lead ions and methylammonium vacancies to result in the PL blinking observed here.

Generalized colloidal synthesis of high-quality, two-dimensional cesium lead halide perovskite nanosheets and their applications in photodetectors

All-inorganic cesium lead halide perovskite (CsPbX3, X = Cl, Br, and I) nanocrystals (NCs) are emerging as an important class of semiconductor materials with superior photophysical properties and wide potential applications in optoelectronic devices. So far, only a few studies have been conducted to control the shape and geometry of CsPbX3 NCs. Here we report a general approach to directly synthesize two-dimensional (2D) CsPbX3 perovskite and mixed perovskite nanosheets with uniform and ultrathin thicknesses down to a few monolayers. The key to the high-yield synthesis of perovskite nanosheets is the development of a new Cs-oleate precursor. The as-synthesized CsPbX3 nanosheets exhibit bright photoluminescence with broad wavelength tunability by composition modulation. The excellent optoelectronic properties of CsPbX3 nanosheets combined with their unique 2D geometry and large lateral dimensions make them ideal building blocks for building functional devices. To demonstrate their potential applications in optoelectronics, photodetectors based on CsPbBr3 nanosheets are fabricated, which exhibit high on/off ratios with a fast response time.

10.6% Certified Colloidal Quantum Dot Solar Cells via Solvent-Polarity-Engineered Halide Passivation

Colloidal quantum dot (CQD) solar cells are solution-processed photovoltaics with broad spectral absorption tunability. Major advances in their efficiency have been made via improved CQD surface passivation and device architectures with enhanced charge carrier collection. Herein, we demonstrate a new strategy to improve further the passivation of CQDs starting from the solution phase. A cosolvent system is employed to tune the solvent polarity in order to achieve the solvation of methylammonium iodide (MAI) and the dispersion of hydrophobic PbS CQDs simultaneously in a homogeneous phase, otherwise not achieved in a single solvent. This process enables MAI to access the CQDs to confer improved passivation. This, in turn, allows for efficient charge extraction from a thicker photoactive layer device, leading to a certified solar cell power conversion efficiency of 10.6%, a new certified record in CQD photovoltaics.

Using Perovskite Nanoparticles as Halide Reservoirs in Catalysis and as Spectrochemical Probes of Ions in Solution

The ability of cesium lead halide (CsPbX3; X = Cl(-), Br(-), I(-)) perovskite nanoparticles (P-NPs) to participate in halide exchange reactions, to catalyze Finkelstein organohalide substitution reactions, and to colorimetrically monitor chemical reactions and detect anions in real time is described. With the use of tetraoctylammonium halide salts as a starting point, halide exchange with the P-NPs was performed to calibrate reactivity, stability, and extent of ion exchange. The exchange of CsPbI3 with Cl(-) or Br(-) causes a significant blue-shift in absorption and photoluminescence, whereas reacting I(-) with CsPbBr3 causes a red-shift of similar magnitudes. With the high local halide concentrations and the facile nature of halide exchange in mind, we then explored the ability of P-NPs to catalyze organohalide exchange in Finkelstein like reactions. Results indicate that the P-NPs serve as excellent halide reservoirs for substitution of organohalides in nonpolar media, leading to not only different organohalide products, but also a complementary color change over the course of the reaction, which can be used to monitor kinetics in a precise manner. The merits of using P-NP as spectrochemical probes for real time assaying is then expanded to other anions which can react with, or result in unique, classes of perovskites.

Phase transformation, morphology control, and luminescence evolution of cesium lead halide nanocrystals in the anion exchange process

CsPbX₃ NCs with different photoluminescence properties were synthesized by anion exchange. A mechanism was supposed by exploring luminescence evolution.

From ligands to binding motifs and beyond; the enhanced versatility of nanocrystal surfaces

Surface chemistry bridges the gap between nanocrystal synthesis and their applications.