Optical deformability as an inherent cell marker for testing malignant transformation and metastatic competence

Light forces the pace: optical manipulation for biophotonics

The biomedical sciences have benefited immensely from photonics technologies in the last 50 years. This includes the application of minute forces that enable the trapping and manipulation of cells and single molecules. In terms of the area of biophotonics, optical manipulation has made a seminal contribution to our understanding of the dynamics of single molecules and the microrheology of cells. Here we present a review of optical manipulation, emphasizing its impact on the areas of single-molecule studies and single-cell biology, and indicating some of the key experiments in the fields.

Cellular deformation and intracellular stress propagation during optical stretching

Experiments have shown that mechanical stress can regulate many cellular processes. However, in most cases, the exact regulatory mechanisms are still not well understood. One approach in improving our understanding of such mechanically induced regulation is the quantitative study of cell deformation under an externally applied stress. In this paper, an axisymmetric finite-element model is developed and used to study the deformation of single, suspended fibroblasts in an optical stretcher in which a stretching force is applied onto the surface of the cell. A feature of our physical model is a viscoelastic material equation whose parameters vary spatially to mimic the experimentally observed spatial heterogeneity of cellular material properties. Our model suggests that cell size is a more important factor in determining the maximal strain of the optically stretched fibroblasts compared to the thickness of the actin cortical region. This result could explain the higher deformability observed experimentally for malignant fibroblasts in the optical stretcher. Our model also shows that maximal stress propagates into the nuclear region for malignant fibroblasts whereas for normal fibroblasts, it does not. We discuss how this may impact the transduction of cancer signaling pathways.

Vinculin facilitates cell invasion into three-dimensional collagen matrices

The cytoskeletal protein vinculin contributes to the mechanical link of the contractile actomyosin cytoskeleton to the extracellular matrix (ECM) through integrin receptors. In addition, vinculin modulates the dynamics of cell adhesions and is associated with decreased cell motility on two-dimensional ECM substrates. The effect of vinculin on cell invasion through dense three-dimensional ECM gels is unknown. Here, we report how vinculin expression affects cell invasion into three-dimensional collagen matrices. Cell motility was investigated in vinculin knockout and vinculin expressing wild-type mouse embryonic fibroblasts. Vinculin knockout cells were 2-fold more motile on two-dimensional collagen-coated substrates compared with wild-type cells, but 3-fold less invasive in 2.4 mg/ml three-dimensional collagen matrices. Vinculin knockout cells were softer and remodeled their cytoskeleton more dynamically, which is consistent with their enhanced two-dimensional motility but does not explain their reduced three-dimensional invasiveness. Importantly, vinculin-expressing cells adhered more strongly to collagen and generated 3-fold higher traction forces compared with vinculin knockout cells. Moreover, vinculin-expressing cells were able to migrate into dense (5.8 mg/ml) three-dimensional collagen matrices that were impenetrable for vinculin knockout cells. These findings suggest that vinculin facilitates three-dimensional matrix invasion through up-regulation or enhanced transmission of traction forces that are needed to overcome the steric hindrance of ECMs.

Optofluidic chip for single cell trapping and stretching fabricated by a femtosecond laser

The authors present the design and optimization of an optofluidic monolithic chip, able to provide optical trapping and controlled stretching of single cells. The chip is fabricated in a fused silica glass substrate by femtosecond laser micromachining which can produce both optical waveguides and microfluidic channels with great accuracy. A new fabrication procedure adopted in this work allows the demonstration of microchannels with a square cross-section, thus guaranteeing an improved quality of the trapped cell images. Femtosecond laser micromachining emerges as a promising technique for the development of multifunctional integrated biophotonic devices that can be easily coupled to a microscope platform, thus enabling a complete characterization of the cells under test.

Femtosecond laser fabricated monolithic chip for optical trapping and stretching of single cells

We report on the fabrication by a femtosecond laser of an optofluidic device for optical trapping and stretching of single cells. Versatility and three-dimensional capabilities of this fabrication technology provide straightforward and extremely accurate alignment between the optical and fluidic components. Optical trapping and stretching of single red blood cells are demonstrated, thus proving the effectiveness of the proposed device as a monolithic optical stretcher. Our results pave the way for a new class of optofluidic devices for single cell analysis, in which, taking advantage of the flexibility of femtosecond laser micromachining, it is possible to further integrate sensing and sorting functions.

Topographically induced self-deformation of the nuclei of cells: dependence on cell type and proposed mechanisms

Osteosarcoma-derived cell lines (SaOs-2, MG63) have recently been shown to deform their nucleus considerably in response to surface topography. Such a deformation had not been described previously. Here we present results on additional cell lines, including cancerous (OHS4, U2OS), immortalized (F/STRO-1(+)A and FHSO6) and healthy cells (HOP). The cancerous cells were found to deform extensively, the immortalized cells showed small deformations, whereas the healthy cells showed deformation only at short incubation times. These results suggest a strong link between the malignant transformation of cells and the state of the cytoskeletal network. We propose mechanisms to explain the deformation in which the cytoskeleton either pushes down on the nucleus during spreading or pulls it down upon adhesion to the pillars.

Power-law rheology analysis of cells undergoing micropipette aspiration

Accurate quantification of the mechanical properties of living cells requires the combined use of experimental techniques and theoretical models. In this paper, we investigate the viscoelastic response of suspended NIH 3T3 fibroblasts undergoing micropipette aspiration using power-law rheology model. As an important first step, we examine the pipette size effect on cell deformation and find that pipettes larger than ~7 μm are more suitable for bulk rheological measurements than smaller ones and the cell can be treated as effectively continuum. When the large pipettes are used to apply a constant pressure to a cell, the creep deformation is better fitted with the power-law rheology model than with the liquid drop or spring-dashpot models; magnetic twisting cytometry measurement on the rounded cell confirms the power-law behavior. This finding is further extended to suspended cells treated with drugs targeting their cytoskeleton. As such, our results suggest that the application of relatively large pipettes can provide more effective assessment of the bulk material properties as well as support application of power-law rheology to cells in suspension.

Label-free cancer cell detection with impedimetric transducers

While cancer is still an implacable disease, many cancers can be cured if they are diagnosed in an early stage. Recently, it was reported that the transformation from normal cells to cancer cells can change their mechanoelastic properties to become softer and more deformable. If some cancer cells are more deformable, then a progressive increase of the volume of softer cancer cells should be induced as an abrupt change in osmolarity is applied. On the basis of this hypothesis, we developed a sensor that can electronically monitor the volume increase of cancer cells under hyposmotic pressure. By this methodology, K:Molv NIH 3T3 cells, 786-O human kidney carcinoma cells, and MPSC-1 ovarian cancer cells were successfully detected within 30 min using on the order of 10 cells. These cancer cells could be detected with the same sensitivity even in the presence of a vast excess of the respective noncancerous cells [NIH 3T3 cells, human embryonic kidney (HEK) 293 cells, ovarian surface epithelial (OSE) cells]. Since the proposed impedimetric sensor could be useful for detecting cancer cells fast and reliably, it could be further implemented in the screening of large populations of tissue samples and the detection of circulating tumor cells for point-of-care applications.

Integrins stimulate E-cadherin-mediated intercellular adhesion by regulating Src-kinase activation and actomyosin contractility

Cadherins and integrins are major adhesion molecules regulating cell-cell and cell-matrix interactions. In vitro and in vivo studies have demonstrated the existence of crosstalk between integrins and cadherins in cell adhesion and motility. We used a dual pipette assay to measure the force required to separate E-cadherin-producing cell doublets and to investigate the role of integrin in regulating the strength of intercellular adhesion. A greater force was required to separate cell doublets bound to fibronectin or vitronectin-coated beads than for doublets bound to polylysine-coated beads. This effect depended on cell spreading and the duration of stimulation. Cells expressing type II cadherin-7 also responded to fibronectin stimulation to produce a higher intercellular adhesion. Establishment of cadherin-mediated adhesion needed ROCK, MLCK and myosin ATPase II activity. The regulation of intercellular adhesion strength by integrin stimulation required activation of Src family kinases, ROCK and actomyosin contractility. These findings highlight the importance and mechanisms of molecular crosstalk between cadherins and integrins in the control of cell plasticity during histogenesis and morphogenesis.

Microfluidic tools for cell biological research

Microfluidic technology is creating powerful tools for cell biologists to control the complete cellular microenvironment, leading to new questions and new discoveries. We review here the basic concepts and methodologies in designing microfluidic devices, and their diverse cell biological applications.

Manipulation and isolation of single cells and nuclei

The heterogeneous behavior of cells within a cell population makes measurements at the multicellular level insensitive to changes in single cells. Single-cell and single-nucleus analyses are therefore important to address this deficiency which will aid in the understanding of fundamental biology at both the cellular and subcellular levels. Recent technological advancements have enabled the development of new methodologies capable of handling these new challenges. This review highlights various techniques used in single-cell and single-nucleus manipulation and isolation. In particular, the applications related to microfluidics, electrical, optical, and physical methods will be discussed. Ultimately, it is hoped that these techniques will enable fundamental tests to be conducted on single cells and nuclei. One important potential outcome is that this will contribute not only towards detection and isolation of diseased cells but also more accurate diagnosis and prognosis of human diseases.

Fröhlich's coherent excitations & the cancer problem--a retrospective overview of his guiding philosophy

The guiding philosophy underlying Fröhlich's approach to biology from the side of theoretical physics is summarized, and illustrated, in the context of his prediction of (dynamic) coherent excitations in living systems, based on their dielectric and elastic properties, and far-from-equilibrium (nonlinear) character. His envisaged role of these coherent excitations in cell division and its control is outlined, together with the associated implications for cancer--as understood both at the time of his work and subsequently.

Determination of cell elasticity through hybrid ray optics and continuum mechanics modeling of cell deformation in the optical stretcher

The optical stretcher is a dual-beam trap capable of stretching individual cells. Previous studies have used either ray- or wave-optical models to compute the optical pressure on the surface of a spherical cell. We have extended the ray-optics model to account for focusing by the spherical interface and the effects of multiple internal reflections. Simulation results for red-blood cells (RBCs) show that internal reflections can lead to significant perturbation of the deformation, leading to a systematic error in the determination of cellular elasticity. Calibration studies show excellent agreement between the predicted and measured escape force, and RBC stiffness measurements are consistent with literature values. Measurements of the elasticity of murine osteogenic cells reveal that these cells are approximately 5.4 times stiffer than RBCs.

The morphological and biomechanical changes of keratocytes cultured on modified p (HEMA-MMA) hydrogel studied by AFM

The poor integration with host cornea tissue and the low mechanical properties of pHEMA hydrogel for artificial cornea remains a difficult problem to solve. A modified pHEMA hydrogel, MMA copolymerized and type-I collagen and bFGF immobilized, was previously prepared in an attempt to solve the problems. In this study, the cytotoxicity of Col/bFGF-p (HEMA-MMA) and p (HEMA-MMA) was studied by cell adhesion assay and atomic force microscopy (AFM). The results of cell adhesion assay show that the attachment of keratocytes on the modified membrane is much higher than that of the unmodified membrane. This indicates that the material after modification have better cell-material interaction. The AFM images reveal that the morphology of keratocytes cultured on different substrate is obviously different. The cell cultured on modified membrane presented a completely elongated and spindle-shape morphology. The force-distance indicates that the biomechanical of keratocytes changes significantly after culturing on different substrates. The adhesion force (2328+/-523 pN) and Young's modulus (0.51+/-0.125 kPa) of the cell cultured on modified membrane are much higher, and the stiffness (0.08+/-0.022 mN/m) is lower than those of the cell cultured on unmodified membrane. These results show that the cytotoxicity of Col/bFGF-p (HEMA-MMA) for keratocytes is much improved.

Cell mechanics: dissecting the physical responses of cells to force

It is now widely appreciated that normal tissue morphology and function rely upon cells' ability to sense and generate forces appropriate to their correct tissue context. Although the effects of forces on cells have been studied for decades, our understanding of how those forces propagate through and act on different cell substructures remains at an early stage. The past decade has seen a resurgence of interest, with a variety of different micromechanical methods in current use that probe cells' dynamic deformation in response to a time-varying force. The ability of researchers to carefully measure the mechanical properties of cells subjected to a variety of pharmacological and genetic interventions, however, currently outstrips our ability to quantitatively interpret the data in many cases. Despite these challenges, the stage is now set for the development of detailed models for cell deformability, motility, and mechanosensing that are rooted at the molecular level.

Tumor suppressor protein SMAR1 modulates the roughness of cell surface: combined AFM and SEM study

Background

Imaging tools such as scanning electron microscope (SEM) and atomic force microscope (AFM) can be used to produce high-resolution topographic images of biomedical specimens and hence are well suited for imaging alterations in cell morphology. We have studied the correlation of SMAR1 expression with cell surface smoothness in cell lines as well as in different grades of human breast cancer and mouse tumor sections.

Methods

We validated knockdown and overexpression of SMAR1 using RT-PCR as well as Western blotting in human embryonic kidney (HEK) 293, human breast cancer (MCF-7) and mouse melanoma (B16F1) cell lines. The samples were then processed for cell surface roughness studies using atomic force microscopy (AFM) and scanning electron microscopy (SEM). The same samples were used for microarray analysis as well. Tumors sections from control and SMAR1 treated mice as well as tissues sections from different grades of human breast cancer on poly L-lysine coated slides were used for AFM and SEM studies.

Results

Tumor sections from mice injected with melanoma cells showed pronounced surface roughness. In contrast, tumor sections obtained from nude mice that were first injected with melanoma cells followed by repeated injections of SMAR1-P44 peptide, exhibited relatively smoother surface profile. Interestingly, human breast cancer tissue sections that showed reduced SMAR1 expression exhibited increased surface roughness compared to the adjacent normal breast tissue. Our AFM data establishes that treatment of cells with SMAR1-P44 results into increase in cytoskeletal volume that is supported by comparative gene expression data showing an increase in the expression of specific cytoskeletal proteins compared to the control cells. Altogether, these findings indicate that tumor suppressor function of SMAR1 might be exhibited through smoothening of cell surface by regulating expression of cell surface proteins.

Conclusion

Tumor suppressor protein SMAR1 might be used as a phenotypic differentiation marker between cancerous and non-cancerous cells.

Microrheology with optical tweezers

Microrheology is the study of the flow of materials over small scales. It is of particular interest to those involved with investigations of fluid properties within Lab-on-a-Chip structures or within other micron-scale environments. The article briefly reviews existing active and passive methods used in the study of fluids. It then explores in greater detail the use of optical tweezers as an emerging method to investigate rheological phenomena, including, for example, viscosity and viscoelasticity, as well as the related topic of flow. The article also describes, briefly, potential future applications of this topic, in the fields of biological measurement, in general, and Lab-on-a-Chip, in particular.

The regulatory role of cell mechanics for migration of differentiating myeloid cells

Migration of cells is important for tissue maintenance, immune response, and often altered in disease. While biochemical aspects, including cell adhesion, have been studied in detail, much less is known about the role of the mechanical properties of cells. Previous measurement methods rely on contact with artificial surfaces, which can convolute the results. Here, we used a non-contact, microfluidic optical stretcher to study cell mechanics, isolated from other parameters, in the context of tissue infiltration by acute promyelocytic leukemia (APL) cells, which occurs during differentiation therapy with retinoic acid. Compliance measurements of APL cells reveal a significant softening during differentiation, with the mechanical properties of differentiated cells resembling those of normal neutrophils. To interfere with the migratory ability acquired with the softening, differentiated APL cells were exposed to paclitaxel, which stabilizes microtubules. This treatment does not alter compliance but reduces cell relaxation after cessation of mechanical stress six-fold, congruent with a significant reduction of motility. Our observations imply that the dynamical remodeling of cell shape required for tissue infiltration can be frustrated by stiffening the microtubular system. This link between the cytoskeleton, cell mechanics, and motility suggests treatment options for pathologies relying on migration of cells, notably cancer metastasis.

Cell-mediated immunity in cervical cancer evolution

Cell-mediated immunity (CMI) response to different antigens was examined in healthy women, in patients with cervical precancerous lesions, and in patients with cervical cancer. Cervical lesions were diagnosed by cytological (PAP) smears, from examination by colposcopy, and from "punch" biopsy material by histology. CMI response is related to specific processes in healthy and cancer cells. CMI was investigated by leukocyte adherence inhibition (LAI) assay using specific antigen (prepared from cervical carcinoma tissue) and non specific antigen (prepared from blood of mice infected by LDH--lactate dehydrogenase--virus). The CMI responses of healthy women and cancer patients to the antigens used are different: the majority of T lymphocytes display adherence and non adherence, respectively (but the CMI responses elicited by the antigens are not equal and small quantitative differences are observed). Regardless of the CIN (cervical intraepithelial neoplasia) grades, CMI responses correspond either to healthy women or to cervical carcinoma patients (at about similar ratio of cases in all the CIN groups). Effect of non specific antigen suggests that cervical carcinoma transformation may be connected with reduction of mitochondrial activity similar to processes in LDH virus infection.

Mechanical properties and gene expression of chondrocytes on micropatterned substrates following dedifferentiation in monolayer

Chondrocytes in articular cartilage normally exhibit high expression of collagen II and aggrecan but rapidly dedifferentiate to a fibroblastic phenotype if passaged in culture. Previous studies have suggested that the loss of chondrocyte phenotype is associated with changes in the structure of the F-actin cytoskeleton, which also controls cell mechanical properties. In this study, we examined how dedifferentiation in monolayer influences the mechanical properties of chondrocytes isolated from different zones of articular cartilage. Atomic force microscopy was used to measure the mechanical properties of superficial and middle/deep zone chondrocytes as they underwent serial passaging and subsequent growth on fibronectin-coated, micropatterned self-assembled monolayers (MSAMs) that restored a rounded cell shape in 2D culture. Chondrocytes exhibited significant increases in elastic and viscoelastic moduli with dedifferentiation in culture. These changes were only partially ameliorated by the restoration of a rounded shape on micropatterned surfaces. Furthermore, intrinsic zonal differences in cell mechanical properties were rapidly lost with passage. These findings indicate that cell mechanical properties may provide additional measures of phenotypic expression of chondrocytes as they undergo dedifferentiation and possibly redifferentiation in culture.

Tunable Liquid Gradient Refractive Index (L-GRIN) lens with two degrees of freedom

We report a tunable optofluidic microlens configuration named the Liquid Gradient Refractive Index (L-GRIN) lens for focusing light within a microfluidic device. The focusing of light was achieved through the gradient refractive index (GRIN) within the liquid medium, rather than via curved refractive lens surfaces. The diffusion of solute (CaCl(2)) between side-by-side co-injected microfluidic laminar flows was utilized to establish a hyperbolic secant (HS) refractive index profile to focus light. Tailoring the refractive index profile by adjusting the flow conditions enables not only tuning of the focal distance (translation mode), but also shifting of the output light direction (swing mode), a second degree of freedom that to our knowledge has yet to be accomplished for in-plane tunable microlenses. Advantages of the L-GRIN lens also include a low fluid consumption rate, competitive focusing performance, and high compatibility with existing microfluidic devices. This work provides a new strategy for developing integrative tunable microlenses for a variety of lab-on-a-chip applications.

Rapid Molecular and Morphological Responses of Prostate Cell Lines to Cell–Cell Contact

Cell-cell adhesion in 2-D PZ-HPV-7 prostate epithelial and DU-145 prostate cancer cell aggregates (monolayers), synchronously and rapidly (within 30 s) formed in suspension in an ultrasound trap has been examined over 60 min. The intracellular distributions of the cadherin/catenin complex components for both cell lines were time-dependent and were clearly identifiable as early as 150 s following cell-cell contact in the trap, while equilibrium positions were reached within 60 min following cell-cell contact. The accumulation of E-cadherin at the cell-cell interface was greater for PZ-HPV-7 than for DU-145 cells over 60 min in the trap, with the apparent formation of adherens junctions over that time scale in PZ-HPV-7 but not in DU-145 cells. The amounts of F-actin, alpha-, beta-, and gamma-catenins recruited to the cell-cell interface of PZ-HPV-7 cells were on average 2.4 times higher than those of DU-145 cells. The ability of different cell types to spread along neighboring cells was 1.5-fold greater for the PZ-HPV-7 than for the DU-145 cells. These results, discussed also in the context of earlier studies of cell adhesion in an ultrasound trap, characterize a reduced adhesiveness of DU-145 cells compared to PZ-HPV-7 cells.

Antimitotic chemotherapeutics promote adhesive responses in detached and circulating tumor cells

In the clinical treatment of breast cancer, antimitotic cytotoxic agents are one of the most commonly employed chemotherapies, owing largely to their antiproliferative effects on the growth and survival of adherent cells in studies that model primary tumor growth. Importantly, the manner in which these chemotherapeutics impact the metastatic process remains unclear. Furthermore, since dissemination of tumor cells through the systemic circulation and lymphatics necessitates periods of detached survival, it is equally important to consider how circulating tumor cells respond to such compounds. To address this question, we exposed both nontumorigenic and tumor-derived epithelial cell lines to two antitumor compounds, jasplakinolide and paclitaxel (Taxol), in a series of attached and detached states. We report here that jasplakinolide promoted the extension of microtubule-based projections and microtentacle protrusions in adherent and suspended cells, respectively. These protrusions were specifically enriched by upregulation of a stable post-translationally modified form of alpha-tubulin, and this occurred prior to, and independently of any reductions in cellular viability. Microtubule stabilization with Taxol significantly enhanced these effects. Additionally, Taxol promoted the attachment and spreading of suspended tumor cell populations on extracellular matrix. While the antiproliferative effects of these compounds are well recognized and clinically valuable, our findings that microfilament and microtubule binding chemotherapeutics rapidly increase the mechanisms that promote endothelial adhesion of circulating tumor cells warrant caution to avoid inadvertently enhancing metastatic potential, while targeting cell division.

Selective detection of live pathogens via surface-confined electric field perturbation on interdigitated silicon transducers

Detection of physical changes of cells is emerging as a new diagnostic approach to determine their phenotypical features. One of such changes is related to their viability; live (viable) cells are more voluminous than the dead ones, and monitoring this parameter in tissue cells becomes essential in fields such as drug discovery and hazard evaluation. In the area of pathogen detection, an analytical system capable of specifically detecting viable cells with the simple sample preparation and detection process would be highly desirable since live microorganisms can rapidly increase their numbers even at extremely low concentration and become a severe health risk. However, current sensing strategies cannot clearly determine the viability of cells, and hence they are susceptible to false-positive signals from harmless dead pathogens. Here we developed a robust electronic immunoassay that uses a pair of polycrystalline silicon interdigitated electrodes for the rapid detection of pathogens with high specificity for live cells. After bacterial cells were specifically anchored to the surface of the antibody-modified electrode, the characteristic geometry of the transducer enables the selective detection of viable cells with a limit of detection of 3 x 10(2) cfu/mL and an incubation time of only 1 h. The CMOS compatible fabrication process of the chip along with the label-free, reagent-less electronic detection and the easy electrode regeneration to recycle for another impedance measurement make this approach an excellent candidate for oncoming economical in-field viable-cell detection systems, fully integrable with sophisticated signal processing circuits.

Compaction of cell shape occurs before decrease of elasticity in CHO-K1 cells treated with actin cytoskeleton disrupting drug cytochalasin D

The actin filaments of the cytoskeleton form a highly dynamic polymer scaffold which is actively involved in many essential mechanisms such as cell migration, transport, mitosis, and mechanosensitivity. We treated CHO-K1 cells with different concentrations of the actin cytoskeleton disrupting drug cytochalasin D. Then investigating the cells' elastic behaviour by scanning force microscopy-based rheology we confirmed for high cytochalasin D concentrations (> or =1.5 microM) a significant decrease of mechanical stability. At lower concentrations we measured no significant softening, but flattening and a horizontal contraction was observable even at low concentrations (> or =0.3 microM) of cytochalasin D. The observed changes in cell shape resulted in a lower cell volume, showing that there is compensation by volume for small decreases in cytoskeletal strength resulting from reduced numbers or lengths of actin filaments. These results suggest that the characteristic functions defining a cell's mechanical stability such as mechanosensitivity can be maintained via small changes in cell volume in order to counter fluctuations in cytoskeletal composition.

Extreme axial optical force in a standing wave achieved by optimized object shape

Standing wave optical trapping offers many useful advantages in comparison to single beam trapping, especially for submicrometer size particles. It provides axial force stronger by several orders of magnitude, much higher axial trap stiffness, and spatial confinement of particles with higher refractive index. Mainly spherical particles are nowadays considered theoretically and trapped experimentally. In this paper we consider prolate objects of cylindrical symmetry with radius periodically modulated along the axial direction and we present a theoretical study of optimized objects shapes resulting in up to tenfold enhancement of the axial optical force in comparison with the original unmodulated object shape. We obtain analytical formulas for the axial optical force acting on low refractive index objects where the light scattering by the object is negligible. Numerical results based on the coupled dipole method are presented for objects with higher refractive indices and they support the previous simplified analytical conclusions.

Deformability study of breast cancer cells using microfluidics

Cell deformability is an important biomarker which can be used to distinguish between healthy and diseased cells. In this study, microfluidics is used to probe the biorheological behaviour of breast cancer cells in an attempt to develop a method to distinguish between non-malignant and malignant cells. A microfabricated fluidic channel design consisting of a straight channel and two reservoirs was used to study the biorheological behaviour of benign breast epithelial cells (MCF-10A) and non-metastatic tumor breast cells (MCF-7). Quantitative parameters such as entry time (time taken for the cell to squeeze into the microchannel) and transit velocity (speed of the cell flowing through the microchannel) were defined and measured from these studies. Our results demonstrated that a simple microfluidic device can be used to distinguish the difference in stiffness between benign and cancerous breast cells. This work lays the foundation for the development of potential microfluidic devices which can subsequently be used in the detection of cancer cells.

Cytoskeletal role in differential adhesion patterns of normal fibroblasts and breast cancer cells inside silicon microenvironments

In this paper we studied differential adhesion of normal human fibroblast cells and human breast cancer cells to three dimensional (3-D) isotropic silicon microstructures and investigated whether cell cytoskeleton in healthy and diseased state results in differential adhesion. The 3-D silicon microstructures were formed by a single-mask single-isotropic-etch process. The interaction of these two cell lines with the presented microstructures was studied under static cell culture conditions. The results show that there is not a significant elongation of both cell types attached inside etched microstructures compared to flat surfaces. With respect to adhesion, the cancer cells adopt the curved shape of 3-D microenvironments while fibroblasts stretch to avoid the curved sidewalls. Treatment of fibroblast cells with cytochalasin D changed their adhesion, spreading and morphology and caused them act similar to cancer cells inside the 3-D microstructures. Statistical analysis confirmed that there is a significant alteration (P < 0.001) in fibroblast cell morphology and adhesion property after adding cytochalasin D. Adding cytochalasin D to cancer cells made these cells more rounded while there was not a significant alteration in their adhesion properties. The distinct geometry-dependent cell-surface interactions of fibroblasts and breast cancer cells are attributed to their different cytoskeletal structure; fibroblasts have an organized cytoskeletal structure and less deformable while cancer cells deform easily due to their impaired cytoskeleton. These 3-D silicon microstructures can be used as a tool to investigate cellular activities in a 3-D architecture and compare cytoskeletal properties of various cell lines.

Rigidity-dependent cross talk between integrin and cadherin signaling

Integrin-cadherin cross talk is an important aspect of cell function. We explored this signaling using substrates micropatterned with islands of fibronectin surrounded by E-cadherin, capturing the segregation of these signals in normal tissue. While MDCK cells were able to concurrently form adhesive structures with these two proteins, engagement of fibronectin by MCF-7 cells, an adenocarcinoma cell line, inhibited response of these cells to E-cadherin. We further demonstrated that this inhibition is rigidity dependent; on soft elastomer substrates with Young's modulus in the range of tens of kiloPascals, MCF-7 cells were able to engage both integrin and cadherin ligands.

Mechanics, malignancy, and metastasis: the force journey of a tumor cell

A cell undergoes many genetic and epigenetic changes as it transitions to malignancy. Malignant transformation is also accompanied by a progressive loss of tissue homeostasis and perturbations in tissue architecture that ultimately culminates in tumor cell invasion into the parenchyma and metastasis to distant organ sites. Increasingly, cancer biologists have begun to recognize that a critical component of this transformation journey involves marked alterations in the mechanical phenotype of the cell and its surrounding microenvironment. These mechanical differences include modifications in cell and tissue structure, adaptive force-induced changes in the environment, altered processing of micromechanical cues encoded in the extracellular matrix (ECM), and cell-directed remodeling of the extracellular stroma. Here, we review critical steps in this "force journey," including mechanical contributions to tissue dysplasia, invasion of the ECM, and metastasis. We discuss the biophysical basis of this force journey and present recent advances in the measurement of cellular mechanical properties in vitro and in vivo. We end by describing examples of molecular mechanisms through which tumor cells sense, process and respond to mechanical forces in their environment. While our understanding of the mechanical components of tumor growth, survival and motility remains in its infancy, considerable work has already yielded valuable insight into the molecular basis of force-dependent tumor pathophysiology, which offers new directions in cancer chemotherapeutics.

Nanostructure and nanomechanics analysis of lymphocyte using AFM: from resting, activated to apoptosis

The ultrastructural and mechanical properties of single resting, activated and apoptosis lymphocyte have been investigated by atomic force microscopy (AFM). Using topographic imaging, we showed that the surface of the resting lymphocyte is smooth, while lymphocyte activation and apoptosis are often accompanied by changes in cell morphology. The apoptosis lymphocyte is rougher than those of the two other morphotypes, and coated with many big particles. Using spatially resolved force-distance curves, we found that the valve of the activated lymphocyte is about two to three times stiffer (Young's modulus of approximately 20 kPa) than those of the two other morphotypes (5-11 kPa). These results can improve our understanding of the mechanical properties of cells during growth and differentiation.

Particle-tracking microrheology of living cells: principles and applications

A multitude of cellular and subcellular processes depend critically on the mechanical deformability of the cytoplasm. We have recently introduced the method of particle-tracking microrheology, which measures the viscoelastic properties of the cytoplasm locally and with high spatiotemporal resolution. Here we establish the basic principles of particle-tracking microrheology, describing the advantages of this approach over more conventional approaches to cell mechanics. We present basic concepts of molecular mechanics and polymer physics relevant to the microrheological response of cells. Particle-tracking microrheology can probe the mechanical properties of live cells in experimentally difficult, yet more physiological, environments, including cells embedded inside a 3D matrix, adherent cells subjected to shear flows, and cells inside a developing embryo. Particle-tracking microrheology can readily reveal the lost ability of diseased cells to resist shear forces.

Optical sorting of dielectric Rayleigh spherical particles with scattering and standing waves

An all optical method for dielectric Rayleigh particle sorting possesses significant advantages. Here, we describe an approach that applies optical scattering forces to translate varied sized particles differentially from a surface followed by the introduction of an optical standing wave to maintain and tighten the positional tolerance of the differentiated particles in the medium. Numerical simulation demonstrates the workability of this scheme; which is highly dependent on Brownian forces typically dominant at this length scale. It also shows the significant impact of temperature and medium viscosity on the operation of this technique.

Separation of malignant human breast cancer epithelial cells from healthy epithelial cells using an advanced dielectrophoresis-activated cell sorter (DACS)

In this paper, we successfully separated malignant human breast cancer epithelial cells (MCF 7) from healthy breast cells (MCF 10A) and analyzed the main parameters that influence the separation efficiency with an advanced dielectrophoresis (DEP)-activated cell sorter (DACS). Using the efficient DACS, the malignant cancer cells (MCF 7) were isolated successfully by noninvasive methods from normal cells with similar cell size distributions (MCF 10A), depending on differences between their material properties such as conductivity and permittivity, because our system was able to discern the subtle differences in the properties by generating continuously changed electrical field gradients. In order to evaluate the separation performance without considering size variations, the cells collected from each outlet were divided into size-dependent groups and counted statistically. Following that, the quantitative relative ratio of numbers between MCF 7 and MCF 10A cells in each size-dependent group separated by the DEP were compared according to applied frequencies in the range 48, 51, and 53 MHz with an applied amplitude of 8 V(pp). Finally, under the applied voltage of 48 MHz-8 V(pp) and a flow rate of 290 microm/s, MCF 7 and MCF 10A cells were separated with a maximum efficiency of 86.67% and 98.73% respectively. Therefore, our suggested system shows it can be used for detection and separation of cancerous epithelial cells from noncancerous cells in clinical applications.

Role of the endothelium during tumor cell metastasis: is the endothelium a barrier or a promoter for cell invasion and metastasis?

The malignancy of cancer disease depends on the ability of the primary tumor to metastasize to distant organs. The process of the metastasis formation has largely been analyzed, but still main pathways regarding the extravasation step at the end of the metastasis formation process are controversially discussed. An agreement has been reached about the importance of the endothelium to promote metastasis formation either by enhancing the growth of the primary tumor or by homing (targeting) the tumor cells to blood or lymph vessels. The mechanical properties of the invading tumor cells become the focus of several studies, but the endothelial cell mechanical properties are still elusive. This paper describes the different roles of the endothelium in the process of metastasis formation and focuses on a novel role of the endothelium in promoting tumor cell invasion. It discusses how novel biophysical tools and in vivo animal models help to determine the role of the endothelium in the process of tumor cell invasion. Evidence is provided that cell mechanical properties, for example, contractile force generation of tumor cells, are involved in the process of tumor cell invasion.

Mechanotransduction gone awry

Cells sense their physical surroundings through mechanotransduction - that is, by translating mechanical forces and deformations into biochemical signals such as changes in intracellular calcium concentration or by activating diverse signalling pathways. In turn, these signals can adjust cellular and extracellular structure. This mechanosensitive feedback modulates cellular functions as diverse as migration, proliferation, differentiation and apoptosis, and is crucial for organ development and homeostasis. Consequently, defects in mechanotransduction - often caused by mutations or misregulation of proteins that disturb cellular or extracellular mechanics - are implicated in the development of various diseases, ranging from muscular dystrophies and cardiomyopathies to cancer progression and metastasis.

Deformation and failure of protein materials in physiologically extreme conditions and disease

Biological protein materials feature hierarchical structures that make up a diverse range of physiological materials. The analysis of protein materials is an emerging field that uses the relationships between biological structures, processes and properties to probe deformation and failure phenomena at the molecular and microscopic level. Here we discuss how advanced experimental, computational and theoretical methods can be used to assess structure-process-property relations and to monitor and predict mechanisms associated with failure of protein materials. Case studies are presented to examine failure phenomena in the progression of disease. From this materials science perspective, a de novo basis for understanding biological processes can be used to develop new approaches for treating medical disorders. We highlight opportunities to use knowledge gained from the integration of multiple scales with physical, biological and chemical concepts for potential applications in materials design and nanotechnology.

Light at work: the use of optical forces for particle manipulation, sorting, and analysis

We review the combinations of optical micro-manipulation with other techniques and their classical and emerging applications to non-contact optical separation and sorting of micro- and nanoparticle suspensions, compositional and structural analysis of specimens, and quantification of force interactions at the microscopic scale. The review aims at inspiring researchers, especially those working outside the optical micro-manipulation field, to find new and interesting applications of these methods.

Oral cancer diagnosis by mechanical phenotyping

Oral squamous cell carcinomas are among the 10 most common cancers and have a 50% lethality rate after 5 years. Despite easy access to the oral cavity for cancer screening, the main limitations to successful treatment are uncertain prognostic criteria for (pre-)malignant lesions. Identifying a functional cellular marker may represent a significant improvement for diagnosis and treatment. Toward this goal, mechanical phenotyping of individual cells is a novel approach to detect cytoskeletal changes, which are diagnostic for malignant change. The compliance of cells from cell lines and primary samples of healthy donors and cancer patients was measured using a microfluidic optical stretcher. Cancer cells showed significantly different mechanical behavior, with a higher mean deformability and increased variance. Cancer cells (n approximately 30 cells measured from each patient) were on average 3.5 times more compliant than those of healthy donors [D(normal) = (4.43 +/- 0.68) 10(-3) Pa(-1); D(cancer) = (15.8 +/- 1.5) 10(-3) Pa(-1); P < 0.01]. The diagnosis results of the patient samples were confirmed by standard histopathology. The generality of these findings was supported by measurements of two normal and four cancer oral epithelial cell lines. Our results indicate that mechanical phenotyping is a sensible, label-free approach for classifying cancer cells to enable broad screening of suspicious lesions in the oral cavity. It could in principle be applied to any cancer to aid conventional diagnostic procedures.

A tense situation: forcing tumour progression

Cells within tissues are continuously exposed to physical forces including hydrostatic pressure, shear stress, and compression and tension forces. Cells dynamically adapt to force by modifying their behaviour and remodelling their microenvironment. They also sense these forces through mechanoreceptors and respond by exerting reciprocal actomyosin- and cytoskeletal-dependent cell-generated force by a process termed 'mechanoreciprocity'. Loss of mechanoreciprocity has been shown to promote the progression of disease, including cancer. Moreover, the mechanical properties of a tissue contribute to disease progression, compromise treatment and might also alter cancer risk. Thus, the changing force that cells experience needs to be considered when trying to understand the complex nature of tumorigenesis.

A neural network model for cell classification based on single-cell biomechanical properties

The potential success of tissue engineering or other cell-based therapies is dependent on factors such as the purity and homogeneity of the source cell populations. The ability to enrich cell harvests for specific phenotypes can have significant effects on the overall success of such therapies. While most techniques for cell sorting or enrichment have relied on cell surface markers, recent studies have shown that single-cell mechanical properties can serve as identifying markers of phenotype. In this study, a neural network modeling approach was developed to classify mesenchymal-derived primary and stem cells based on their biomechanical properties. Cell sorting was simulated using previously published data characterizing the mechanical properties of several different cell types as measured by atomic force microscopy. Neural networks were trained using combined data sets, with the resultant groupings analyzed for their purity, efficiency, and enrichment. Heterogeneous populations of zonal chondrocytes, chondrosarcoma cells, and mesenchymal-lineage cells, respectively, could all be classified into enriched subpopulations. Additionally, adult stem cells (adipose-derived or bone marrow-derived) separated disproportionately into nodes associated with the three primary mesenchymal lineages examined. These findings suggest that mathematical approaches such as neural network modeling, in combination with novel measures of cell properties, may provide a means of classifying and eventually sorting mixed populations of cells that are otherwise difficult to identify using more established techniques. In this respect, the identification of biomechanically based cell properties that increase the percentage of stem cells capable of differentiating into predictable lineages may improve the overall success of cell-based therapies.

Microfluidics as a functional tool for cell mechanics

Living cells are a fascinating demonstration of nature's most intricate and well-coordinated micromechanical objects. They crawl, spread, contract, and relax-thus performing a multitude of complex mechanical functions. Alternatively, they also respond to physical and chemical cues that lead to remodeling of the cytoskeleton. To understand this intricate coupling between mechanical properties, mechanical function and force-induced biochemical signaling requires tools that are capable of both controlling and manipulating the cell microenvironment and measuring the resulting mechanical response. In this review, the power of microfluidics as a functional tool for research in cell mechanics is highlighted. In particular, current literature is discussed to show that microfluidics powered by soft lithographic techniques offers the following capabilities that are of significance for understanding the mechanical behavior of cells: (i) Microfluidics enables the creation of in vitro models of physiological environments in which cell mechanics can be probed. (ii) Microfluidics is an excellent means to deliver physical cues that affect cell mechanics, such as cell shape, fluid flow, substrate topography, and stiffness. (iii) Microfluidics can also expose cells to chemical cues, such as growth factors and drugs, which alter their mechanical behavior. Moreover, these chemical cues can be delivered either at the whole cell or subcellular level. (iv) Microfluidic devices offer the possibility of measuring the intrinsic mechanical properties of cells in a high throughput fashion. (v) Finally, microfluidic methods provide exquisite control over drop size, generation, and manipulation. As a result, droplets are being increasingly used to control the physicochemical environment of cells and as biomimetic analogs of living cells. These powerful attributes of microfluidics should further stimulate novel means of investigating the link between physicochemical cues and the biomechanical response of cells. Insights from such studies will have implications in areas such as drug delivery, medicine, tissue engineering, and biomedical diagnostics.