Thiazole-based organic semiconductors for organic electronics

Structural influence of a dichalcogenopheno-1,3,4-chalcogenodiazole comonomer on the optoelectronic properties of diketopyrrolopyrrole-based conjugated polymers

Dichalcogenopheno-1,3,4-chalcogenodiazole units are newly designed and introduced into dithienyl diketopyrrolopyrrole-based copolymers showing promising optoelectronic characteristics.

Step-Economical Synthesis of Conjugated Polymer Materials Composed of Three Components: Donor, Acceptor, and π Units

Conjugated polymers have immense potential for their use as semiconducting materials in organic optoelectronic devices. The improvement of synthetic methods for conjugated polymers is important for the practical application of conjugated polymers. For mass production, synthetic methods must be developed by considering the concerns regarding cost and environment. Reduction in the number of synthetic steps is an efficient approach to address these concerns. The utilization of direct CH functionalization is a reasonable strategy in monomer and polymer syntheses, because the prefunctionalization steps for CC bond formation can be eliminated. This review summarizes the recent developments in the efficient syntheses of conjugated polymers as well as their monomers via direct arylation (CH/CX coupling) and cross-dehydrogenative coupling (CH/CH coupling) reactions.

Enabling Control over Mechanical Conformity and Luminescence in Molecular Crystals: Interaction Engineering in Action

Molecular crystals of π-conjugated molecules are of great interest as the highly ordered dense packing offers superior charge and exciton transport compared with its amorphous counterparts. However, integration into optoelectronic devices remains a major challenge owing to its inherently brittle nature. Herein, control over the mechanical conformity in single crystals of pyridine-appended thiazolothiazole derivatives is reported by modulating the molecular packing through interaction engineering. Two polymorphs were prepared by achieving control over the thermodynamic/kinetic factors of crystallization; one of the polymorphs exhibits elastic bending whereas the other is brittle. The control over the bending ability was achieved by forming co-crystals with hydrogen/halogen bond donors. A seamless extended crisscross pattern with respect to the bend plane through a ditopic hydrogen-bonding motif showed the highest compliance towards mechanical bending, whereas the co-crystals with a layered crisscross arrangement with segregated layers of co-formers exhibit slightly lower bending conformity. These results update the rationale behind the plastic/elastic bending in molecular crystals. The co-crystals of ditopic halogen bond co-assemblies are particularly appealing for waveguiding applications as the co-crystals blend high mechanical flexibility and luminescence properties. The hydrogen bonded co-crystals are non-emissive in nature owing to excited state proton transfer dynamics. The rationale behind the fluorescence properties of these materials was also established from DFT calculations in a quantum mechanics/molecular mechanics (QM/MM) framework.

An Efficient Precatalyst Approach for the Synthesis of Thiazole-Containing Conjugated Polymers via Cu-Catalyzed Direct Arylation Polymerization (Cu-DArP)

Over the past decade, direct arylation polymerization (DArP) has emerged as a facile and sustainable methodology for the synthesis of conjugated polymers. Recently, we developed Cu-catalyzed DArP (Cu-DArP) as a low-cost, Pd-free synthetic pathway, which enables conjugated polymers to be synthesized with high molecular weights and minimization of defects. However, the lack of study on the use of Cu-precatalysts in small-molecule direct arylation poses significant limitations for Cu-DArP to potentially overtake conventional Pd-catalyzed methodology, such as the low solubility and stability of the previously employed CuI. Therefore, in this report, we decide to explore the utility of a well-defined, easy-to-prepare, highly soluble, and stable precatalyst, Cu(phen)(PPh₃)Br, as an alternative to the CuI, 1,10-phenanthroline catalytic system previously used for Cu-DArP. Herein, we report a drastic improvement of Cu-DArP methodology for the synthesis of 5,5'-bithiazole (5-BTz)-based conjugated polymers enabled by an efficient precatalyst approach, affording polymers with good M_n (up to 16.5 kDa) and excellent yields (up to 79%). ¹H NMR studies reveal the exclusion of homocoupling defects, which further verifies the excellent stability of Cu(phen)(PPh₃)Br compared to CuI. Furthermore, we were able to decrease the catalyst loading from 15 mol % to only 5 mol % (M_n of 11.8 kDa, 64% yield), which is unprecedented when aryl bromides are employed for Cu-DArP. Significantly, 5-BTz was shown to be inactive under various of Pd-DArP conditions, which demonstrates the high compatibility of Cu-DArP as the only pathway for the C-H activation of the 5-BTz unit and a clear case demonstrating an advantage of Cu-DArP relative to Pd-DArP.

Sequential drug release via chemical diffusion and physical barriers enabled by hollow multishelled structures

Hollow multishelled structures (HoMSs), with relatively isolated cavities and hierarchal pores in the shells, are structurally similar to cells. Functionally inspired by the different transmission forms in living cells, we studied the mass transport process in HoMSs in detail. In the present work, after introducing the antibacterial agent methylisothiazolinone (MIT) as model molecules into HoMSs, we discover three sequential release stages, i.e., burst release, sustained release and stimulus-responsive release, in one system. The triple-shelled structure can provide a long sterility period in a bacteria-rich environment that is nearly 8 times longer than that of the pure antimicrobial agent under the same conditions. More importantly, the HoMS system provides a smart responsive release mechanism that can be triggered by environmental changes. All these advantages could be attributed to chemical diffusion- and physical barrier-driven temporally-spatially ordered drug release, providing a route for the design of intelligent nanomaterials.

2-Aminomethylene-5-sulfonylthiazole Inhibitors of Lysyl Oxidase (LOX) and LOXL2 Show Significant Efficacy in Delaying Tumor Growth

The lysyl oxidase (LOX) family of extracellular proteins plays a vital role in catalyzing the formation of cross-links in fibrillar elastin and collagens leading to extracellular matrix (ECM) stabilization. These enzymes have also been implicated in tumor progression and metastatic disease and have thus become an attractive therapeutic target for many types of invasive cancers. Following our recently published work on the discovery of aminomethylenethiophenes (AMTs) as potent, orally bioavailable LOX/LOXL2 inhibitors, we report herein the discovery of a series of dual LOX/LOXL2 inhibitors, as well as a subseries of LOXL2-selective inhibitors, bearing an aminomethylenethiazole (AMTz) scaffold. Incorporation of a thiazole core leads to improved potency toward LOXL2 inhibition via an irreversible binding mode of inhibition. SAR studies have enabled the discovery of a predictive 3DQSAR model. Lead AMTz inhibitors exhibit improved pharmacokinetic properties and excellent antitumor efficacy, with significantly reduced tumor growth in a spontaneous breast cancer genetically engineered mouse model.

Synergistic Effects of Polymer Donor Backbone Fluorination and Nitrogenation Translate into Efficient Non-Fullerene Bulk-Heterojunction Polymer Solar Cells

State-of-the-art non-fullerene bulk-heterojunction (BHJ) polymer solar cells outperform the more extensively studied polymer-fullerene BHJ solar cells in terms of efficiency, thermal-, and photostability. Considering the strong light absorption in the near-infrared region (600-1000 nm) for most of the efficient acceptors, the exploration of high-performing large band gap (LBG) polymer donors with complementary optical absorption ranging from 400 to 700 nm remains critical. In this work, the strategy of concurrently incorporating fluorine (-F) and unsaturated nitrogen (-N) substituents along the polymer backbones is used to develop the LBG polymer donor PB[N][F]. Results show that the F- and N-substituted polymer donor PB[N][F] realizes up to 14.4% efficiency in BHJ photovoltaic devices when paired with a benchmark molecule acceptor Y6, which largely outperforms the analogues PB with an efficiency of only 3.6% and PB[N] with an efficiency of 11.8%. Systematic examinations show that synergistic effects of polymer backbone fluorination and nitrogenation can significantly increase ionization potential values, improve charge transport, and reduce bimolecular recombination and trap-assisted recombination in the PB[N][F]:Y6 BHJ system. Importantly, our study shows that the F- and N-substituted conjugated polymers are promising electron-donor materials for solution-processed non-fullerene BHJ solar cells.

Reduced Energy Loss in Non-Fullerene Organic Solar Cells with Isomeric Donor Polymers Containing Thiazole π-Spacers

Large energy loss is one of the key factors that limit the power conversion efficiency (PCE) of organic solar cells (OSCs). In this work, we report reduced energy losses of OSCs via introducing thiazole π-spacers with different orientations to replace the thiophene π-spacers of the prototype polymer PBDB-T. The newly formed thiazole-containing isomeric polymers, PBDBTz-2 and PBDBTz-5, exhibited blue-shifted absorption and deeper lying energy levels compared to PBDB-T. When blended with IT-4F, the two polymers realized PCEs of 10.4% for PBDBTz-2 and 9.6% for PBDBTz-5, respectively, which were higher than that of PBDB-T (PCE = 9.3%). More critically, considerable open-circuit voltage (V_oc) enhancements were achieved by PBDBTz-2 and PBDBTz-5, which were 0.14 and 0.21 V higher than that of PBDB-T. A detailed analysis showed that the reduced energy loss resulted from the lower radiative recombination below the band gap and nonradiative recombination loss. This study demonstrated that the introduction of thiazole π-spacers with different orientations is effective to reduce the energy losses of OSCs, which provided valuable inspirations for the development of new conjugated polymers to the efficiency breakthrough of OSCs in future.

Effect of site energy fluctuation on charge transport in disordered organic molecules

Effect of dynamics of site energy disorder on charge transport in organic molecular semiconductors is not yet well-established. In order to study the relationship between the dynamics of site energy disorder and charge transport, we have performed a multiscale study on dialkyl substituted thienothiophene capped benzobisthiazole (BDHTT-BBT) and methyl-substituted dicyanovinyl-capped quinquethiophene (DCV5T-Me) molecular solids. In this study, we explore the structural dynamics and correlated charge transport by electronic structure calculations, molecular dynamics, and kinetic Monte-Carlo simulations. We have also proposed the differential entropy dependent diffusion and charge density equations to study the electric field drifted diffusion property and carrier density. In this investigation, we have addressed the transformation mechanism from dynamic to static disorder in the extended stacked molecular units. Here, the decrease in the charge transfer rate due to site energy fluctuations reveals the dispersion transport along the extended π-stacked molecules. Furthermore, the calculated current density for a different set of site energy difference values shows the validity and the limitations of the Einstein relation. Based on the calculated ideality factor, we have classified the charge transport in these molecules as either the Langevin or the Shockley-Read-Hall type mechanism. Through the calculated mobility, current density, and ideality factor analysis, we categorize the applicability of molecules of interest for photovoltaic or light emitting diode applications.

Nanoscale Film Morphology and n-Type Digital Memory Characteristics of π-Conjugated Donor-Acceptor Alternating Copolymer Based on Thiophene and Thiadiazole Units

Various molecular weight π-conjugated donor-acceptor polymers based on thiadiazole and thiophene units are investigated with respect to nanoscale film morphology and digital memory performance. Interestingly, all polymers reveal excellent n-type digital permanent memory characteristics, which are governed by the combination of Ohmic and trap-limited space charge limited conductions via a hopping process using thiadiazole and thiophene units as charge traps and stepping stones. The digital memory performance is significantly influenced by the film morphology details that vary with the polymer molecular weight as well as the film thickness. A higher population of face-on structure formation, as well as higher molecular weight, provides a wider film thickness window of digital memory operation. Overall, π-conjugated PBTDzTV polymers are suitable for the production of high-performance, programmable n-type permanent memory devices with very low power consumption.

BODIPY-Based Semiconducting Materials for Organic Bulk Heterojunction Photovoltaics and Thin-Film Transistors

The rapid emergence of organic (opto)electronics as a promising alternative to conventional (opto)electronics has been achieved through the design and development of novel π-conjugated systems. Among various semiconducting structural platforms, 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) π-systems have recently attracted attention for use in organic thin-films transistors (OTFTs) and organic photovoltaics (OPVs). This Review article provides an overview of the developments in the past 10 years on the structural design and synthesis of BODIPY-based organic semiconductors and their application in OTFT/OPV devices. The findings summarized and discussed here include the most recent breakthroughs in BODIPYs with record-high charge carrier mobilities and power conversion efficiencies (PCEs). The most up-to-date design rationales and discussions providing a strong understanding of structure-property-function relationships in BODIPY-based semiconductors are presented. Thus, this review is expected to inspire new research for future materials developments/applications in this family of molecules.

Efficient Electron Mobility in an All-Acceptor Napthalenediimide-Bithiazole Polymer Semiconductor with Large Backbone Torsion

An all-acceptor napthalenediimide-bithiazole-based co-polymer, P(NDI2OD-BiTz), was synthesized and characterized for application in thin-film transistors. Density functional theory calculations point to an optimal perpendicular dihedral angle of 90° between acceptor units along isolated polymer chains; yet optimized transistors yield electron mobility of 0.11 cm²/(V s) with the use of a zwitterionic naphthalene diimide interlayer. Grazing incidence X-ray diffraction measurements of annealed films reveal that P(NDI2OD-BiTz) adopts a highly ordered edge-on orientation, exactly opposite to similar bithiophene analogs. This report highlights an NDI and thiazole all-acceptor polymer and demonstrates high electron mobility despite its nonplanar backbone conformation.

Effects of Pyrazine Derivatives and Substituted Positions on the Photoelectric Properties and Electromemory Performance of D⁻A⁻D Series Compounds

Pyrazine derivatives quinoxaline and pyridopyrazine were selected as the acceptors, and benzocarbazole was used as the donor to synthesize four different D⁻A⁻D compounds. The results showed that 2,3-bis(decyloxy)pyridine[3,4-b]pyrazine (DPP) exhibited stronger electron-withdrawing ability than that of 2,3-bis(decyloxy)quinoxaline (DPx), because DPP possesses one more nitrogen (N) atom, resulting in a red-shift of the intramolecular charge transfer (ICT) absorption bands and fluorescent emission spectra for compounds with DPP as the acceptor compared with those that use DPx as the acceptor. The band-gap energy (Eg) of the four D⁻A⁻D compounds were 2.82 eV, 2.70 eV, 2.48 eV, and 2.62 eV, respectively, for BPC-2DPx, BPC-3DPx, BPC-2DPP, and BPC-3DPP. The solvatochromic effect was insignificant when the four compounds were in the ground state, which became significant in an excited state. With increasing solvent polarity, a 30⁻43 nm red shift was observed in the emissive spectra of the compounds. The thermal decomposition temperatures of the four compounds between 436 and 453 °C had very high thermal stability. Resistor-type memory devices based on BPC-2DPx and BPC-2DPP were fabricated in a simple sandwich configuration, Al/BPC-2DPx/ITO or Al/BPC-2DPP/ITO. The two devices showed a binary non-volatile flash memory, with lower threshold voltages and better repeatability.

Solvents Effects on Film Morphologies and Memory Behavior of a Perylenediimide-Containing Pendent Polymer

The large polydispersity index of functional pendant polymers has hindered their application in semiconductors. Herein, a novel pendant polymer with perylenediimide (PDI) in the side chains was successfully synthesized through ring-opening metathesis polymerization (ROMP) with a very low polydispersity index. The synthesized polymers were spin-coated on indium tin oxide (ITO) substrate by using a mixture of 1,2-dichlorobenzene (o-DCB) and methanol (MeOH) solvents. The surface morphologies and intermolecular π-π stacking of the fabricated film could be adjusted through tuning of the ratio of o-DCB and MeOH, and thus, the sandwich-structured device of ITO/polymer/aluminum exhibited different electrical behavior. The threshold voltages of the devices decreased as the MeOH content was increased from 0 to 30 % (v/v); however, the device changed from being unrewritable to rewritable if the MeOH content was increased to 40 %; a probable mechanism for this process is discussed. It is hoped that this new idea of synthesizing narrow polydispersity index pendant polymers, and the fabrication of high-quality films through the use of a mixture of solvents could allow high-performance memory devices to be prepared in the future.

Thiazole Imide-Based All-Acceptor Homopolymer: Achieving High-Performance Unipolar Electron Transport in Organic Thin-Film Transistors

High-performance unipolar n-type polymer semiconductors are critical for advancing the field of organic electronics, which relies on the design and synthesis of new electron-deficient building blocks with good solubilizing capability, favorable geometry, and optimized electrical properties. Herein, two novel imide-functionalized thiazoles, 5,5'-bithiazole-4,4'-dicarboxyimide (BTzI) and 2,2'-bithiazolothienyl-4,4',10,10'-tetracarboxydiimide (DTzTI), are successfully synthesized. Single crystal analysis and physicochemical study reveal that DTzTI is an excellent building block for constructing all-acceptor homopolymers, and the resulting polymer poly(2,2'-bithiazolothienyl-4,4',10,10'-tetracarboxydiimide) (PDTzTI) exhibits unipolar n-type transport with a remarkable electron mobility (μ_e ) of 1.61 cm² V^-1 s^-1 , low off-currents (I_off ) of 10^-10 -10^-11 A, and substantial current on/off ratios (I_on /I_off ) of 10⁷ -10⁸ in organic thin-film transistors. The all-acceptor homopolymer shows distinctive advantages over prevailing n-type donor-acceptor copolymers, which suffer from ambipolar transport with high I_off s > 10^-8 A and small I_on /I_off s < 10⁵ . The results demonstrate that the all-acceptor approach is superior to the donor-acceptor one, which results in unipolar electron transport with more ideal transistor performance characteristics.

Synthesis and characterization of two new TiO2-containing benzothiazole-based imine composites for organic device applications

The effect of the presence of titanium dioxide in two new imines, (E,E)-(butane-1,4-diyl)bis(oxybutane-4,1-diyl) bis(4-{[(benzo[d][1,3]thiazol-2-yl)methylidene]amino}benzoate) (SP1) and (E)-N-[(benzo[d][1,3]thiazol-2-yl)methylidene]-4-dodecylaniline (SP2), on the properties and stability of imine:TiO₂ composites for organic device applications were examined. The investigated titanium dioxide (in anatase form, obtained via the sol-gel method) exhibited a surface area of 59.5 m²/g according to Brunauer-Emmett-Teller theory, and its structure is a combination of both meso- and microporous. The average pore diameter calculated by the Barrett-Joyner-Halenda method was 6.2 nm and the cumulative volume of pores was 0.117 m³/g. The imine SP1 exhibited columnar organization (Col), while SP2 revealed a hexagonal columnar crystalline phase (Col_hk). The imine:TiO₂ mixtures in various weight ratio (3:0, 3:1, 3:2, 3:3) showed a lower energy gap and HOMO-LUMO energy levels compared to pure TiO₂. This implies that TiO₂ provides not only a larger surface area for sensitizer adsorption and good electron collection, but also causes a shift of the imine energy levels resulting from intermolecular interaction. Also the temperature of the phase transition was slightly affected with the increase of TiO₂ concentration in imine-based composites. The changes observed in the Fourier transform middle-infrared absorption (FT-MIR) spectra confirmed the significant influence of TiO₂ on structural properties of both investigated imines. Similar interactions of oxygen vacancies existing on the TiO₂ surface with SP1 and SP2 were observed. The imine:TiO₂ mixtures showed good air stability and reusability, which demonstrates its potential for organic device applications.

Mechanochemical solid-state synthesis of 2-aminothiazoles, quinoxalines and benzoylbenzofurans from ketones by one-pot sequential acid- and base-mediated reactions

α-Chloroketones - obtained by the atom-economical chlorination of ketones with trichloroisocyanuric acid (TCCA) in the presence of p-TSA under ball-milling conditions - were set up for a sequential base-mediated condensation reaction with thiourea/thiosemicarbazides, o-phenylenediamine and salicylaldehyde to afford 2-aminothiazoles, 2-hydrazinylthiazoles, quinoxalines and benzoylbenzofurans, respectively, in respectable yields. The viability of one-pot sequential acid- and base-mediated reactions in the solid state under ball-milling conditions is thus demonstrated.

Trithiazolyl-1,3,5-triazines bearing decyloxybenzene moieties: synthesis, photophysical and electrochemical properties, and self-assembly behavior

We synthesized the first members of trithiazolyl-1,3,5-triazines that combine attractive photophysical and self-assembling properties.

Polymer semiconductors incorporating head-to-head linked 4-alkoxy-5-(3-alkylthiophen-2-yl)thiazole

Head-to-head linked bithiophenes with planar backbones hold distinctive advantages for constructing organic semiconductors, such as good solubilizing capability, enabling narrow bandgap, and effective tuning of frontier molecular orbital (FMO) levels using minimal thiophene numbers. In order to realize planar backbone, alkoxy chains are typically installed on thiophene head positions, owing to the small van der Waals radius of oxygen atom and accompanying noncovalent S⋯O interaction. However, the strong electron donating alkoxy chains on the electron-rich thiophenes lead to elevated FMO levels, which are detrimental to material stability and device performance. Thus, a new design approach is needed to counterbalance the strong electron donating property of alkoxy chains to bring down the FMOs. In this study, we designed and synthesized a new head-to-head linked building block, 4-alkoxy-5-(3-alkylthiophen-2-yl)thiazole (TRTzOR), using an electron-deficient thiazole to replace the electron-rich thiophene. Compared to previously reported 3-alkoxy-3′-alkyl-2,2′-bithiophene (TRTOR), TRTzOR is a weaker electron donor, which considerably lowers FMOs and maintains planar backbone through the noncovalent S⋯O interaction. The new TRTzOR was copolymerized with benzothiadiazoles with distinct F numbers to yield a series of polymer semiconductors. Compared to TRTOR-based analogous polymers, these TRTzOR-based polymers have broader absorption up to 950 nm with lower-lying FMOs by 0.2–0.3 eV, and blending these polymers with PC₇₁BM leads to polymer solar cells (PSCs) with improved open-circuit voltage (V_oc) by ca. 0.1 V and a much smaller energy loss (E_loss) as low as 0.59 eV. These results demonstrate that thiazole substitution is an effective approach to tune FMO levels for realizing higher V_ocs in PSCs and the small E_loss renders TRTzOR a promising building block for developing high-performance organic semiconductors.

A new head-to-head linked thienylthiazole was synthesized, enabling polymer semiconductors with low energy loss of 0.59 eV in solar cells.

A new approach to thiazoloisoindigo and derivatives using a lithium tetramethylpiperidine promoted cyclization to thiazoloisatin

Thiazoloisoindigo and its derivatives were synthesized for the first time from thiazoloisatin, which was obtained via a novel cyclization strategy.

NIR-Absorbing Donor-Acceptor Based 1,1,4,4-Tetracyanobuta-1,3-Diene (TCBD)- and Cyclohexa-2,5-Diene-1,4-Ylidene-Expanded TCBD-Substituted Ferrocenyl Phenothiazines

A series of unsymmetrical (D-A-D₁ , D₁ -π-D-A-D₁ , and D₁ -A₁ -D-A₂ -D₁ ; A=acceptor, D=donor) and symmetrical (D₁ -A-D-A-D₁ ) phenothiazines (4 b, 4 c, 4 c', 5 b, 5 c, 5 d, 5 d', 5 e, 5 e', 5 f, and 5 f') were designed and synthesized by a [2+2] cycloaddition-electrocyclic ring-opening reaction of ferrocenyl-substituted phenothiazines with tetracyanoethylene (TCNE) and 7,7,8,8-tetracyanoquinodimethane (TCNQ). The photophysical, electrochemical, and computational studies show a strong charge-transfer (CT) interaction in the phenothiazine derivatives that can be tuned by varying the number of TCNE/TCNQ acceptors. Phenothiazines 4 b, 4 c, 4 c', 5 b, 5 c, 5 d, 5 d', 5 e, 5 e', 5 f and 5 f' show redshifted absorption in the λ=400 to 900 nm region, as a result of a low HOMO-LUMO gap, which is supported by TD-DFT calculations. The electrochemical study exhibits reduction waves at low potential due to strong 1,1,4,4-tetracyanobuta-1,3-diene (TCBD) and cyclohexa-2,5-diene-1,4-ylidene-expanded TCBD acceptors. The incorporation of cyclohexa-2,5-diene-1,4-ylidene-expanded TCBD stabilized the LUMO energy level to a greater extent than TCBD.

Modular synthesis of thiazoline and thiazole derivatives by using a cascade protocol

The first common synthetic protocol for thiazolines and thiazoles.

Thiazolines and thiazoles are an integral part of numerous natural products, a number of drugs, and many useful molecules such as ligands for metal catalysis. We report the first common synthetic protocol for the synthesis of thiazoles and thiazolines. Novel molecules are efficiently synthesized by using readily available and inexpensive substrates. The reaction conditions are mild and pure products are obtained without work-up and column purification.

Bithiazole: An Intriguing Electron-Deficient Building for Plastic Electronic Applications

The heterocyclic thiazole unit has been extensively used as electron-deficient building block in π-conjugated materials over the last decade. Its incorporation into organic semiconducting materials is particularly interesting due to its structural resemblance to the more commonly used thiophene building block, thus allowing the optoelectronic properties of a material to be tuned without significantly perturbing its molecular structure. Here, we discuss the structural differences between thiazole- and thiophene-based organic semiconductors, and the effects on the physical properties of the materials. An overview of thiazole-based polymers is provided, which have emerged over the past decade for organic electronic applications and it is discussed how the incorporation of thiazole has affected the device performance of organic solar cells and organic field-effect transistors. Finally, in conclusion, an outlook is presented on how thiazole-based polymers can be incorporated into all-electron deficient polymers in order to obtain high-performance acceptor polymers for use in bulk-heterojunction solar cells and as organic field-effect transistors. Computational methods are used to discuss some newly designed acceptor building blocks that have the potential to be polymerized with a fused bithiazole moiety, hence propelling the advancement of air-stable n-type organic semiconductors.

Hybrid photoluminescent materials containing a benzobisthiazole core for liquid crystal and gel applications

Tetra- and hexacatenar amide compounds containing a linear centrosymmetric benzobisthiazole core were synthesized with good yields. These compounds were characterized and their structures confirmed by elemental analysis, and FT-IR, Maldi mass and NMR spectroscopy. All compounds exhibited excellent thermal stability up to 330 °C. The tetracatenar series containing a double substitution in the meta positions did not show mesomorphic behaviour, whereas the hexacatenar and tetracatenar series having a double substitution in the meta and para positions showed liquid crystal properties with optical textures typical of columnar mesophases corroborated by POM analysis. The mesomorphic properties were dependent on the length, number and position of alkoxy chains attached at the end of the rigid core. XRD studies of the hexacatenar series showed the hexagonal columnar structure of the mesophases. Photoluminescence properties in solution were observed in the visible region, with good quantum yields. In the solid state, these compounds behave as blue emitters and they are able to change colour with acid or base addition. The hexacatenar benzobisthiazole compound with an alkoxy chain of 14 carbons presented properties of a supergelator in chloroform, leading to the formation of a fluorescent organogel material with fluorescence emission in the blue region.

Impact of Preferential π-Binding in Catalyst-Transfer Polycondensation of Thiazole Derivatives

Polymerizing electron-deficient arenes in a controlled, chain-growth fashion remains a significant challenge despite a decade of research on catalyst-transfer polycondensation. The prevailing hypothesis is that the chain-growth mechanism stalls at a strongly associated metal-polymer π-complex, preventing catalyst turnover. To evaluate this hypothesis, we performed mechanistic studies using thiazole derivatives and identified approaches to improve their chain-growth polymerization. These studies revealed a surprisingly high barrier for chain-walking toward the reactive C-X bond. In addition, a competitive pathway involving chain-transfer to monomer was identified. This pathway is facilitated by ancillary ligand dissociation and N-coordination to the incoming monomer. We found that this chain-transfer pathway can be attenuated by using a rigid ancillary ligand, leading to an improved polymerization. Combined, these studies provide mechanistic insight into the challenges associated with electron-deficient monomers as well as ways to improve their living, chain-growth polymerization. Our mechanistic studies also revealed an unexpected radical anion-mediated oligomerization in the absence of catalyst, as well as a surprising oxidative addition into the thiazole C-S bond in a model system.