Nonnoble-Metal-Based Plasmonic Nanomaterials: Recent Advances and Future Perspectives

pH and Redox Dual-Response Disulfide Bond-Functionalized Red-Emitting Gold Nanoclusters for Monitoring the Contamination of Organophosphorus Pesticides in Foods

Most of the fluorescence sensors require choline oxidase or quenchers to detect organophosphorus pesticides (OPs) based on a single hydrolysate and suffer from high cost, complex procedures, weak stability, and low sensitivity. Here, we proposed a brand-new fluorescence strategy for highly sensitive detection of OPs based on both hydrolysate-response disulfide bond-functionalized gold nanoclusters (S-S-AuNCs) without additional substances. S-S-AuNCs were synthesized via a facile one-step redox reaction and emitted bright red light with ultrasmall size and high water dispersion. Interestingly, S-S-AuNCs displayed a unique response to thiol compounds and low pH values and were thus pioneered as a high-efficiency sensor for OPs based on acetylcholinesterase (AChE)-catalyzed hydrolysis of acetylthiocholine into thiocholine and CH₃COOH and OP inhibition of AChE activity. Further, S-S-AuNCs were employed to monitor the residue, distribution, and metabolization of methidathion in pakchoi with acceptable results. We believe that this work supplies a simpler and more highly sensitive approach for OP assay than the known ones and opens a new avenue to development of multistimulus-responsive and high-performance fluorescence substances.

Multi-frequency impedance sensing for detection and sizing of DNA fragments

Electronic biosensors for DNA detection typically utilize immobilized oligonucleotide probes on a signal transducer, which outputs an electronic signal when target molecules bind to probes. However, limitation in probe selectivity and variable levels of non-target material in complex biological samples can lead to nonspecific binding and reduced sensitivity. Here we introduce the integration of 2.8 μm paramagnetic beads with DNA fragments. We apply a custom-made microfluidic chip to detect DNA molecules bound to beads by measuring Impedance Peak Response (IPR) at multiple frequencies. Technical and analytical performance was evaluated using beads containing purified Polymerase Chain Reaction (PCR) products of different lengths (157, 300, 613 bp) with DNA concentration ranging from 0.039 amol to 7.8 fmol. Multi-frequency IPR correlated positively with DNA amounts and was used to calculate a DNA quantification score. The minimum DNA amount of a 300 bp fragment coupled on beads that could be robustly detected was 0.0039 fmol (1.54 fg or 4750 copies/bead). Additionally, our approach allowed distinguishing beads with similar molar concentration DNA fragments of different lengths. Using this impedance sensor, purified PCR products could be analyzed within ten minutes to determine DNA fragment length and quantity based on comparison to a known DNA standard.

One-Pot Heterointerfacial Metamorphosis for Synthesis and Control of Widely Varying Heterostructured Nanoparticles

Despite remarkable facileness and potential in forming a wide variety of heterostructured nanoparticles with extraordinary compositional and structural complexity, one-pot synthesis of multicomponent heterostructures is largely limited by the lack of fundamental mechanistic understanding, designing principles, and well-established, generally applicable chemical methods. Herein, we developed a one-pot heterointerfacial metamorphosis (1HIM) method that allows heterointerfaces inside a particle to undergo multiple equilibrium stages to form a variety of highly crystalline heterostructured nanoparticles at a relatively low temperature (<100 °C). As proof-of-concept experiments, it was shown that widely different single-crystalline semiconductor-metal anisotropic nanoparticles with synergistic chemical, spectroscopic, and band-gap-engineering properties, including a series of metal-semiconductor nanoframes with high structural and compositional tunability, can be formed by using the 1HIM approach. 1HIM offers a new paradigm to synthesize previously unobtainable or poorly controllable heterostructures with unique or synergistic properties and functions.

Designing Carbonized Loofah Sponge Architectures with Plasmonic Cu Nanoparticles Encapsulated in Graphitic Layers for Highly Efficient Solar Vapor Generation

Solar vapor generation represents a promising approach to alleviate water shortage for producing fresh water from undrinkable water resources. Although Cu-based plasmonics have attracted tremendous interest due to efficient light-to-heat conversion, their application faces great challenges in the oxidation resistance of Cu and low evaporation rate. Herein, a hybrid of three-dimensional carbonized loofah sponges and graphene layers encapsulated Cu nanoparticles is successfully synthesized via a facile pyrolysis method. In addition to effective light harvesting, the localized heating effect of stabilized Cu nanoparticles remarkably elevated the surface temperature of Cu@C/CLS to 72 °C, and a vapor generation rate as high as 1.54 kg m^-2 h^-1 with solar thermal efficiency reaching 90.2% under 1 Sun illumination was achieved. A study in the purification of sewage and muddy water with Cu@C/CLS demonstrates a promising perspective in a practical application. These results may offer a new inspiration for the design of efficient nonprecious Cu-based photothermal materials.

Self-assembled Janus plasmene nanosheets as flexible 2D photocatalysts

A leaf is a free-standing photocatalytic system that can effectively harvest solar energy and convert CO₂ and H₂O into carbohydrates in a continuous manner without the need for regeneration or tedious product extraction steps. Despite encouraging advances achieved in designing artificial photocatalysts, most of them function in bulk solution or on rigid surfaces. Here, we report on a 2D flexible photocatalytic system based on close packed Janus plasmene nanosheets. One side of the Janus nanosheets is hydrophilic with catalytically active palladium, while the opposite side is hydrophobic with plasmonic nanocrystals. Such a unique design ensures a stable nanostructure on a flexible polymer substrate, preventing dissolution/degradation of plasmonic photocatalysts during chemical conversion in aqueous solutions. Using catalytic reduction of 4-nitrophenol as a model reaction, we demonstrated efficient plasmon-enhanced photochemical conversion on our flexible Janus plasmene. The photocatalytic efficiency could be tuned by adjusting the palladium thickness or types of constituent building blocks or their orientations, indicating the potential for tailor-made catalyst design for desired reactions. Furthermore, the flexible Janus plasmene nanosheets were designed into a small 3D printed artificial tree, which could continuously convert 30 mL of chemicals in 45 minutes.

Plasmonic Nanoparticles: Basics to Applications (I)

This review presents the main characteristics of metal nanoparticles (NPs), especially consisting of noble metal such as Au and Ag, and brief information on their synthesis methods. The physical and chemical properties of the metal NPs are described, with a particular focus on the optically variable properties (surface plasmon resonance based properties) and surface-enhanced Raman scattering of plasmonic materials. In addition, this chapter covers ways to achieve advances by utilizing their properties in the biological studies and medical fields (such as imaging, diagnostics, and therapeutics). These descriptions will help researchers new to nanomaterials for biomedical diagnosis to understand easily the related knowledge and also will help researchers involved in the biomedical field to learn about the latest research trends.

Gallium chiral nanoshaping for circular polarization handling

In this work we report the local growth of ordered arrays of 3D core-shell chiral nanohelices based on plasmonic gallium metal. The structures can be engineered in a single step using focused ion beam induced deposition, where a Ga⁺ ion source is used to shape the metallic nanohelix core, while the dielectric precursor is dissociated to create dielectric shells. The solubility of gallium in the different investigated dielectric matrices controls the core-shell thickness ratio of the nanohelices. The chiral plasmonic behaviour of these gallium-based nanostructures is experimentally measured by circularly polarized light transmission through nanostructure arrays and compared with numerical simulations. Large chiroptical effects in the visible range are demonstrated due to the plasmonic effects arising from gallium nanoclusters in the core.

Enhanced Spatial Light Confinement of All Inorganic Perovskite Photodetectors Based on Hybrid Plasmonic Nanostructures

3D incident light confinement by radical electromagnetic fields offers a facile and novel way to break through the performance limit of inorganic perovskite CsPbBr₃ quantum dots (QDs). Herein, metallic nanoparticles decorated anodic aluminum oxide (AAO) hybrid plasmonic nanostructures with geometric control are first proposed for cyclic light utilization of perovskite photodetectors, enabled by spatially extended light confinement. The drastic multiple interference induced by plasmonic coupling within AAO matrixes are generated as a function of pore sizes, which can effectively collect the transmitted photons back to the surface. In addition, the self-assembled metallic nanoparticles simultaneously concentrate the incident and reflected light beams into the CsPbBr₃ QD layers. The light confinement inherently stems from the metallic nanoparticles due to the variation of the near surface electromagnetic fields. As a result, perovskite photodetectors based on Al nanoparticles/AAO hybrid plasmonic nanostructures with a pore size of 220 nm exhibit enhanced photoresponse behavior with remarkably increased photocurrent by ≈43× and maintain low dark current under 490 nm light illumination at 1 V.

Chiral Nanoceramics

The study of different chiral inorganic nanomaterials has been experiencing rapid growth during the past decade, with its primary focus on metals and semiconductors. Ceramic materials can substantially expand the range of mechanical, optical, chemical, electrical, magnetic, and biological properties of chiral nanostructures, further stimulating theoretical, synthetic, and applied research in this area. An ever-expanding toolbox of nanoscale engineering and self-organization provides a chirality-based methodology for engineering of hierarchically organized ceramic materials. However, fundamental discoveries and technological translations of chiral nanoceramics have received substantially smaller attention than counterparts from metals and semiconductors. Findings in this research area are scattered over a variety of sources and subfields. Here, the diversity of chemistries, geometries, and properties found in chiral ceramic nanostructures are summarized. They represent a compelling materials platform for realization of chirality transfer through multiple scales that can result in new forms of ceramic materials. Multiscale chiral geometries and the structural versatility of nanoceramics are complemented by their high chiroptical activity, enantioselectivity, catalytic activity, and biocompatibility. Future development in this field is likely to encompass chiral synthesis, biomedical applications, and optical/electronic devices. The implementation of computationally designed chiral nanoceramics for biomimetic catalysts and quantum information devices may also be expected.

AlGaN Deep-Ultraviolet Light-Emitting Diodes with Localized Surface Plasmon Resonance by a High-Density Array of 40 nm Al Nanoparticles

We present a remarkable improvement in the efficiency of AlGaN deep-ultraviolet light-emitting diodes (LEDs) enabled by the coupling of localized surface plasmon resonance (LSPR) mediated by a high-density array of Al nanoparticles (NPs). The Al NPs with an average diameter of ∼40 nm were uniformly distributed near the Al_0.43Ga_0.57N/Al_0.50Ga_0.50N multiple quantum well active region for coupling 285 nm emission by block copolymer lithography. The internal quantum efficiency is enhanced by 57.7% because of the decreased radiative recombination lifetime by the LSPR. As a consequence, the AlGaN LEDs with an array of Al NPs show 33.3% enhanced electroluminescence with comparable electrical properties to those of reference LEDs without Al NPs.

Synthesis and Multipole Plasmon Resonances of Spherical Aluminum Nanoparticles

In comparison to Au and Ag, the high plasma frequency of Al allows multipole plasmon resonances from the ultraviolet to visible (UV-vis) range to be achieved by its nanoparticles with much smaller sizes and even a spherical shape. Herein, we report the high-supersaturation growth of monodisperse spherical Al nanoparticles (Al NPs) from 84 to 200 nm and their distinctive size-dependent multipole plasmon resonance properties in the UV-vis range. Linear relationships between the particle diameter and resonance peak positions of the dipole, quadrupole, and octupole were observed experimentally and confirmed by finite-difference time-domain (FDTD) calculations. FDTD calculations further reveal the high scattering-to-extinction ratio of multipole modes for the particle diameters >100 nm. The extinction coefficients of spherical Al NPs with different diameters were also determined. The excellent matching between the experimental and simulated results in the present work not only offers a standard for the synthesis and characterization of high-quality Al NPs but also provides new insight into the multipole plasmonic properties of Al NPs for advanced optical and sensing applications.

Shapes, Plasmonic Properties, and Reactivity of Magnesium Nanoparticles

Localized surface plasmon resonances have attracted much attention due to their ability to enhance light-matter interactions and manipulate light at the subwavelength level. Recently, alternatives to the rare and expensive noble metals Ag and Au have been sought for more sustainable and large-scale plasmonic utilization. Mg supports plasmon resonances, is one of the most abundant elements in earth's crust, and is fully biocompatible, making it an attractive framework for plasmonics. This feature article first reports the hexagonal, folded, and kite-like shapes expected theoretically from a modified Wulff construction for single crystal and twinned Mg structures and describes their excellent match with experimental results. Then, the optical response of Mg nanoparticles is overviewed, highlighting Mg's ability to sustain localized surface plasmon resonances across the ultraviolet, visible, and near-infrared electromagnetic ranges. The various resonant modes of hexagons, leading to the highly localized electric field characteristic of plasmonic behavior, are presented numerically and experimentally. The evolution of these modes and the associated field from hexagons to the lower symmetry folded structures is then probed, again by matching simulations, optical, and electron spectroscopy data. Lastly, results demonstrating the opportunities and challenges related to the high chemical reactivity of Mg are discussed, including surface oxide formation and galvanic replacement as a synthetic tool for bimetallics. This Feature Article concludes with a summary of the next steps, open questions, and future directions in the field of Mg nanoplasmonics.

Dispersion control in a near-infrared subwavelength resonator with a tailored hyperbolic metamaterial

We demonstrate experimentally and computationally an intricate cavity size dependence of the anomalous near-infrared mode spectrum of an ordinary optical resonator that is combined with a ZnO:Ga-based hyperbolic metamaterial (HMM). Specifically, we reveal the existence of a resonance in subwavelength-sized cavities and demonstrate control over the first-order cavity mode dispersion. We elaborate that these effects arise due to the HMM combining the mode dispersions of purely metallic and purely dielectric cavity cores into a distinct intermediate regime. By tailoring the HMM fill factor, this unique dispersion of a subwavelength resonator can be freely tuned between these two limiting cases.

Cobalt Plasmonic Superstructures Enable Almost 100% Broadband Photon Efficient CO2 Photocatalysis

The efficiency of heterogeneous photocatalysis for converting solar to chemical energy is low on a per photon basis mainly because of the difficulty of capturing and utilizing light across the entire solar spectral wavelength range. This challenge is addressed herein with a plasmonic superstructure, fashioned as an array of nanoscale needles comprising cobalt nanocrystals assembled within a sheath of porous silica grown on a fluorine tin oxide substrate. This plasmonic superstructure can strongly absorb sunlight through different mechanisms including enhanced plasmonic excitation by the hybridization of Co nanoparticles in close proximity, as well as inter- and intra-band transitions. With nearly 100% sunlight harvesting ability, it drives the photothermal hydrogenation of carbon dioxide with a 20-fold rate increase from the silica-supported cobalt catalyst. The present work bridges the gap between strong light-absorbing plasmonic superstructures with photothermal CO₂ catalysis toward the complete utilization of the solar energy.

Overview of Synthetic Methods to Prepare Plasmonic Transition-Metal Nitride Nanoparticles

The search for new plasmonic materials that are low-cost, chemically and thermally stable, and exhibit low optical losses has garnered significant attention among researchers. Recently, metal nitrides have emerged as promising alternatives to conventional, noble-metal-based plasmonic materials, such as silver and gold. Many of the initial studies on metal nitrides have focused on computational prediction of the plasmonic properties of these materials. In recent years, several synthetic methods have been developed to enable empirical analysis. This review highlights synthetic techniques for the preparation of plasmonic metal nitride nanoparticles, which are predominantly free-standing, by using solid-state and solid-gas phase reactions, nonthermal and arc plasma methods, and laser ablation. The physical properties of the nanoparticles, such as shape, size, crystallinity, and optical response, obtained with such synthetic methods are also summarized.

Photothermal Transduction Efficiencies of Plasmonic Group 4 Metal Nitride Nanocrystals

The photothermal transduction efficiencies of group 4 metal nitrides, TiN, ZrN, and HfN, at λ = 850 nm are reported, and the performance of these materials is compared to an Au nanorod benchmark. Transition metal nitride nanocrystals with an average diameter of ∼15 nm were prepared using a solid-state metathesis reaction. HfN exhibited the highest photothermal transduction efficiency of 65%, followed by ZrN (58%) and TiN (49%), which were all higher than those of the commercially purchased Au nanorods (43%). Computational studies performed using a finite element method showed HfN and Au to have the lowest and highest scattering cross section, respectively, which could be a contributing factor to the efficiency trends observed. Furthermore, the changes in temperature as a function of illumination intensity and solution concentration, as well as the cycling stability of the metal nitride solutions, were studied in detail.

Solar-driven plasmonic heterostructure Ti/TiO2-x with gradient doping for sustainable plasmon-enhanced catalysis

Plasmon-enhanced harvesting of photons has contributed to the photochemical conversion and storage of solar energy. However, high dependence on noble metals and weak coupling in heterostructures constrain the progress towards sustainable plasmonic enhancement. Here earth-abundant Ti is studied to achieve the plasmonic enhancement of catalytic activity in a solar-driven heterostructure Ti/TiO2-x. The heterostructure was fabricated by engineering an intense coupling of a surface-etched Ti metal and a gradient-based TiO2-x dielectric via diffusion doping. Ti/TiO2-x exhibits a highly resonant light absorption band associated with surface plasmon resonances that exhibit strong near-field enhancement (NFE) and hot electron injection effects. In a photoelectrochemical system, intense interaction of the resonant plasmons with a vicinal TiO2-x dielectric accelerates the transfer of solar energy to charge carriers for plasmon-enhanced water splitting reactions. Moreover, the plasmonic Ti/TiO2-x structure presents sustained enhanced redox activities over 100 h. The intense coupling by gradient doping offers an effective approach to enable the plasmon resonances of Ti excited by visible light. The Ti-based plasmonic heterostructure potentially opens an alternative avenue towards sustainable plasmon-enhanced catalysis.

Microfluidic Generation of Nanomaterials for Biomedical Applications

As nanomaterials (NMs) possess attractive physicochemical properties that are strongly related to their specific sizes and morphologies, they are becoming one of the most desirable components in the fields of drug delivery, biosensing, bioimaging, and tissue engineering. By choosing an appropriate methodology that allows for accurate control over the reaction conditions, not only can NMs with high quality and rapid production rate be generated, but also designing composite and efficient products for therapy and diagnosis in nanomedicine can be realized. Recent evidence implies that microfluidic technology offers a promising platform for the synthesis of NMs by easy manipulation of fluids in microscale channels. In this Review, a comprehensive set of developments in the field of microfluidics for generating two main classes of NMs, including nanoparticles and nanofibers, and their various potentials in biomedical applications are summarized. Furthermore, the major challenges in this area and opinions on its future developments are proposed.

Decoration of plasmonic Mg nanoparticles by partial galvanic replacement

Plasmonic structures have attracted much interest in science and engineering disciplines, exploring a myriad of potential applications owing to their strong light-matter interactions. Recently, the plasmonic concentration of energy in subwavelength volumes has been used to initiate chemical reactions, for instance by combining plasmonic materials with catalytic metals. In this work, we demonstrate that plasmonic nanoparticles of earth-abundant Mg can undergo galvanic replacement in a nonaqueous solvent to produce decorated structures. This method yields bimetallic architectures where partially oxidized 200-300 nm Mg nanoplates and nanorods support many smaller Au, Ag, Pd, or Fe nanoparticles, with potential for a stepwise process introducing multiple decoration compositions on a single Mg particle. We investigated this mechanism by electron-beam imaging and local composition mapping with energy-dispersive X-ray spectroscopy as well as, at the ensemble level, by inductively coupled plasma mass spectrometry. High-resolution scanning transmission electron microscopy further supported the bimetallic nature of the particles and provided details of the interface geometry, which includes a Mg oxide separation layer between Mg and the other metal. Depending on the composition of the metallic decorations, strong plasmonic optical signals characteristic of plasmon resonances were observed in the bulk with ultraviolet-visible spectrometry and at the single particle level with darkfield scattering. These novel bimetallic and multimetallic designs open up an exciting array of applications where one or multiple plasmonic structures could interact in the near-field of earth-abundant Mg and couple with catalytic nanoparticles for applications in sensing and plasmon-assisted catalysis.

Plasmon-Mediated Chemical Reactions on Nanostructures Unveiled by Surface-Enhanced Raman Spectroscopy

Surface plasmons (SPs) originating from the collective oscillation of conduction electrons in nanostructured metals (Au, Ag, Cu, etc.) can redistribute not only the electromagnetic fields but also the excited carriers (electrons and holes) and heat energy in time and space. Therefore, SPs can engage in a variety of processes, such as molecular spectroscopy and chemical reaction. Recently, plenty of demonstrations have made plasmon-mediated chemical reactions (PMCRs) a very active research field and make it as a promising approach to facilitate light-driven chemical reactions under mild conditions. Concurrently, making use of the same SPs, surface-enhanced Raman spectroscopy (SERS) with a high surface sensitivity and energy resolution becomes a powerful and commonly used technique for the in situ study of PMCRs. Typically, various effects induced by SPs, including the enhanced electromagnetic field, local heating, excited electrons, and excited holes, can mediate chemical reactions. Herein, we use the para-aminothiophenol (PATP) transformation as an example to elaborate how SERS can be used to study the mechanism of PMCR system combined with theoretical calculations. First, we distinguish the chemical transformation of PATP to 4,4'-dimercaptoazobenzene (DMAB) from the chemical enhancement mechanism of SERS through a series of theoretical and in situ SERS studies. Then, we focus on disentangling the photothermal, hot electrons, and "hot holes" effects in the SPs-induced PATP-to-DMAB conversion. Through varying the key reaction parameters, such as the wavelength and intensity of the incident light, using various core-shell plasmonic nanostructures with different charge transfer properties, we extract the key factors that influence the efficiency and mechanism of this reaction. We confidently prove that the transformation of PATP can occur on account of the oxygen activation induced by the hot electrons or because of the action of hot holes in the absence of oxygen and confirm the critical effect of the interface between the plasmonic nanostructure and reactants. The products of these two process are different. Furthermore, we compare the correlation between PMCRs and SERS, discuss different scenario of PMCRs in situ studied by SERS, and provide some suggestions for the SERS investigation on the PMCRs. Finally, we comment on the mechanism studies on how to distinguish the multieffects of SPs and their influence on the PMCRs, as well as on how to power the chemical reaction and regulate the product selectivity in higher efficiencies.

High Spatial Resolution Mapping of Localized Surface Plasmon Resonances in Single Gallium Nanoparticles

Plasmonics has emerged as an attractive field driving the development of optical systems in order to control and exploit light-matter interactions. The increasing interest around plasmonic systems is pushing the research of alternative plasmonic materials, spreading the operability range from IR to UV. Within this context, gallium appears as an ideal candidate, potentially active within a broad spectral range (UV-VIS-IR), whose optical properties are scarcely reported. Importantly, the smart design of active plasmonic materials requires their characterization at high spatial and spectral resolution to access the optical fingerprint of individual nanostructures, attainable by transmission electron microscopy techniques (i.e., by means of electron energy-loss spectroscopy, EELS). Therefore, the optical response of individual Ga nanoparticles (NPs) by means of EELS measurements is analyzed, in order to spread the understanding of the plasmonic response of Ga NPs. The results show that single Ga NPs may support several plasmon modes, whose nature is extensively discussed.

Cost-Effective and High-Throughput Plasmonic Interference Coupled Nanostructures by Using Quasi-Uniform Anodic Aluminum Oxide

Large-area and uniform plasmonic nanostructures have often been fabricated by simply evaporating noble metals such as gold and silver on a variety of nanotemplates such as nanopores, nanotubes, and nanorods. However, some highly uniform nanotemplates are limited to be utilized by long, complex, and expensive fabrication. Here, we introduce a cost-effective and high-throughput fabrication method for plasmonic interference coupled nanostructures based on quasi-uniform anodic aluminum oxide (QU-AAO) nanotemplates. Industrial aluminum, with a purity of 99.5%, and copper were used as a base template and a plasmonic material, respectively. The combination of these modifications saves more than 18 h of fabrication time and reduces the cost of fabrication 30-fold. From optical reflectance data, we found that QU-AAO based plasmonic nanostructures exhibit similar optical behaviors to highly ordered (HO) AAO-based nanostructures. By adjusting the thickness of the AAO layer and its pore size, we could easily control the optical properties of the nanostructures. Thus, we expect that QU-AAO might be effectively utilized for commercial plasmonic applications.

Stirring revealed new functions of ethylenediamine and hydrazine in the morphology control of copper nanowires

Cu nanowires, as promising candidates in many fields because of their merits, are commonly prepared by the solution phase based synthesis which is a simple and scalable method. However, precise control of the morphology, particularly surface roughness, of Cu nanowires is still challenging; and moreover, detailed formation mechanisms of Cu nanowires, in solution phase based synthesis, are still unclear. We here show the morphology manipulation of Cu nanowires by adjusting the stirring rate and the amounts of ethylenediamine and hydrazine (N2H4), yielding Cu nanowires with either smooth or rough surface. Importantly, according to our experimental results and theoretical investigation, new functions of ethylenediamine and N2H4 are found, and a growth process of Cu nanowires is proposed accordingly. In addition to typically accepted roles of ethylenediamine and N2H4, we find that ethylenediamine can facilitate the growth of Cu nanowires by etching Cu oxides and even Cu on the surface of Cu nanowires. Meanwhile, N2H4 molecules can modulate the growth of Cu nanowires as a capping agent, which can be easily influenced by stirring. Additionally, the as-synthesized Cu nanowires with different morphologies exhibit different optical and catalytic properties. This study provides new fundamental insights into the growth mechanism of Cu nanowires, and thus can facilitate controlled synthesis of Cu nanowires for further applications, including electronics, catalysis, and sensing.

Nanoplasmonics in Paper-Based Analytical Devices

Chemical and biological sensing are crucial tools in science and technology. Plasmonic nanoparticles offer a virtually limitless number of photons for sensing applications, which can be available for visual detection over long periods. Moreover, cellulosic materials, such as paper, represent a versatile building block for implementation of simple, yet valuable, microfluidic analytical devices. This mini review outlines the basic theory of nanoplasmonics and the usability of paper as a nanoplasmonic substrate exploiting its features as a (bio)sensing platform based on different mechanisms depending on localized surface plasmon resonance response. Progress, current trends, challenges and opportunities are also underscored. It is intended for general researchers and technologists who are new to the topic as well as specialist/experts in the field.

Boosting the Efficiency of Photoelectrolysis by the Addition of Non-Noble Plasmonic Metals: Al & Cu

Solar water splitting by semiconductor based photoanodes and photocathodes is one of the most promising strategies to convert solar energy to chemical energy to meet the high demand for energy consumption in modern society. However, the state-of-the-art efficiency is too low to fulfill the demand. To overcome this challenge and thus enable the industrial realization of a solar water splitting device, different approaches have been taken to enhance the overall device efficiency, one of which is the incorporation of plasmonic nanostructures. Photoanodes and photocathodes coupled to the optimized plasmonic nanostructures, matching the absorption wavelength of the semiconductors, can exhibit a significantly increased efficiency. So far, gold and silver have been extensively explored to plasmonically enhance water splitting efficiency, with disadvantages of high cost and low enhancement. Instead, non-noble plasmonic metals such as aluminum and copper, are earth-abundant and low cost. In this article, we review their potentials in photoelectrolysis, towards scalable applications.

Label-Free SERS Quantum Semiconductor Probe for Molecular-Level and in Vitro Cellular Detection: A Noble-Metal-Free Methodology

Accurate in vitro molecular-level analysis is an essential step prior to in vivo and clinical application for early diagnosis and cancer treatment. Among the diagnostic techniques, surface-enhanced Raman scattering (SERS) biosensing has shown growing potential due to its noninvasive and real-time characterization of the biomolecules. However, the application of SERS biosensing is mostly limited to the plasmonic noble metals, in the form of either nanoparticles or tips and substrates (fixed probe), on which surface plasmon resonance (SPR) is the prominent enhancement principle. The semiconductor quantum particles have been explored in several optoelectronics applications, but have never been reported to be exploited as a means of surface-enhanced Raman scattering (SERS) for molecular-level and intracellular sensing. Here, we report on the new generation of noble-metal-free SERS probe; Si@SiO₂ quantum probe (Si@SiO₂ Q-probe) whose affinity to functional groups not only imitates a self-driven labeling attribution that enables charge transfer (CT) as an augmented enhancement principle but also its mobile nature in miniaturized scale facilitates endocytosis for in situ live cell biosensing. Moreover, a significant enhancement factor of 10⁶ of rhodamine 6G (R6G) and 10⁷ of glutathione (GSH) at ∼5 × 10^-12 pM concentration has been achieved that is comparable to inherently plasmonic noble metals. Our results showed a capability of the Si@SiO₂ Q-probe to unveil the "biochemical fingerprint" of substantial components of mammalian and cancerous cervical cells, which leads to diagnosis of cervical cancer. These unique attributions of the Si@SiO₂ Q-probe can provide better insight into cell mutation and malignancy.

Non plasmonic semiconductor quantum SERS probe as a pathway for in vitro cancer detection

Surface-enhanced Raman scattering (SERS)-based cancer diagnostics is an important analytical tool in early detection of cancer. Current work in SERS focuses on plasmonic nanomaterials that suffer from coagulation, selectivity, and adverse biocompatibility when used in vitro, limiting this research to stand-alone biomolecule sensing. Here we introduce a label-free, biocompatible, ZnO-based, 3D semiconductor quantum probe as a pathway for in vitro diagnosis of cancer. By reducing size of the probes to quantum scale, we observed a unique phenomenon of exponential increase in the SERS enhancement up to ~106 at nanomolar concentration. The quantum probes are decorated on a nano-dendrite platform functionalized for cell adhesion, proliferation, and label-free application. The quantum probes demonstrate discrimination of cancerous and non-cancerous cells along with biomolecular sensing of DNA, RNA, proteins and lipids in vitro. The limit of detection is up to a single-cell-level detection.