Electrosynthesis of Hydrogen Peroxide Synergistically Catalyzed by Atomic Co-Nx -C Sites and Oxygen Functional Groups in Noble-Metal-Free Electrocatalysts

Electrochemical Synthesis of Hydrogen Peroxide Catalyzed by Carbon Nanotubes with Surface Co-NX Sites and Encapsulated Co Nanoparticles

The exploitation of M-N_X sites, where M is a transition metal atom, is widely regarded as an effective catalytic strategy to promote the oxygen reduction reaction (ORR). In addition, some studies have shown that transition metal nanoparticles (M-NPs) coated with carbon layers can improve the reactivity of ORR and ameliorate the overpotential of the reaction. In this study, we synthesized carbon nanotubes with single-atom Co-N_X active sites, Co-NPs outside the tube, and Co-NPs wrapped in the tube by the complexation-pyrolysis synthesis method and explored the role of the particles and Co-N_X sites through different pickling steps. The catalyst synthesized with the new stratagem in this study shows outstanding selectivity and also ORR activity. Furthermore, a natural air diffusion electrode fabricated using this material can produce H₂O₂ at 323 mg L^-1 h^-1 under neutral conditions without oxygen aeration.

Intrinsic Carbon Defects for the Electrosynthesis of H2O2

Carbon materials have manifested promising potential in electrochemical reduction of O₂ to H₂O₂. The oxygen functional groups have been identified as the catalytic sites. However, the intrinsic carbon defects abundant in carbon materials have often been neglected. Herein, a three-dimensional carbon framework with abundant intrinsic defects and oxygen functional groups (the oxygen content and chemical states of oxygen are comparable to those of commercial carbon black) was introduced and exhibited outstanding catalytic activity and selectivity toward H₂O₂ electrosynthesis. Through a combination of in situ Raman spectroscopy and density functional theory calculations, the intrinsic carbon defects, such as zigzag edge and zigzag pentagon sites with optimal binding energy for OOH, were also determined to be active sites. It was further revealed that intrinsic carbon defects with large negative charge density and asymmetric spin density may have high activity toward H₂O₂ production.

Super-Coordinated Nickel N4 Ni1 O2 Site Single-Atom Catalyst for Selective H2 O2 Electrosynthesis at High Current Densities

Electrochemical production of hydrogen peroxide (H₂ O₂ ) from O₂ on single-atom catalysts has attracted great attention, yet the quest for robust catalysts is driven by achieving >90 % Faradaic efficiency (FE) under industrial-relevant current densities (>100 mA cm^-2 ). Herein we synthesize a catalyst that contains single nickel site coordinated by four nitrogen and two oxygen atoms (i.e., N₄ Ni₁ O₂ ) via involving carboxyl functionalized multiwall carbon nanotubes as a substrate to provide extra O coordination to the regular NiN₄ site. It has a cathodic energy efficiency of approximately 82 % and a H₂ O₂ FE of around 96 % at 200 mA cm^-2 current density, outperforming the reported single-atom catalysts for H₂ O₂ electrosynthesis.

Lattice Strained B-Doped Ni Nanoparticles for Efficient Electrochemical H2 O2 Synthesis

Surface strains are necessary to optimize the oxygen adsorption energy during the oxygen reduction reaction (ORR) in the four-electron process, but the surface strains regulation for ORR in the two-electron process to produce hydrogen peroxide (H₂ O₂ ) is rarely studied. Herein, it is reported that the tensile strained B-doped Ni nanoparticles on carbon support (Ni-B@BNC) could enhance the adsorption of O₂ , stabilize OO bond, and boost the electrocatalytic ORR to H₂ O₂ . Moreover, the Ni-B@BNC catalysts exhibit volcano-type activity for electrocatalytic ORR to H₂ O₂ as a function of the strain intensity, which is controlled by B content. Among them, Ni₄ -B₁ @BNC exhibits the highest H₂ O₂ selectivity of over 86%, H₂ O₂ yield of 128.5 mmol h^-1  g^-1 , and Faraday efficiency of 94.9% at 0.6 V vs reversible hydrogen electrode as well as durable stability after successive cycling, being one of the state-of-the-art electrocatalysts for two-electron ORR. The density functional theory calculations reveal that tensile strain introduced by doping B into Ni nanoparticles could decrease the state density of Ni-3d orbital and optimize the binding energy of OOH* during ORR. A new direction is provided here for the design of highly active and stable catalysts for potential H₂ O₂ production and beyond.

Synergistic Effects in N,O-Comodified Carbon Nanotubes Boost Highly Selective Electrochemical Oxygen Reduction to H2 O2

Electrochemical 2-electron oxygen reduction reaction (ORR) is a promising route for renewable and on-site H2 O2 production. Oxygen-rich carbon nanotubes have been demonstrated their high selectivity (≈80%), yet tailoring the composition and structure of carbon nanotubes to further enhance the selectivity and widen working voltage range remains a challenge. Herein, combining formamide condensation coating and mild temperature calcination, a nitrogen and oxygen comodified carbon nanotubes (N,O-CNTs) electrocatalyst is synthesized, which shows excellent selective (>95%) H2 O2 selectivity in a wide voltage range (from 0 to 0.65 V versus reversible hydrogen electrode). It is significantly superior to the corresponding selectivity values of CNTs (≈50% in 0-0.65 V vs RHE) and O-CNTs (≈80% in 0.3-0.65 V vs RHE). Density functional theory calculations revealed that the C neighbouring to N is the active site. Introducing O-related species can strengthen the adsorption of intermediates *OOH, while N-doping can weaken the adsorption of in situ generated *O and optimize the *OOH adsorption energy, thus improving the 2-electron pathway. With optimized N,O-CNTs catalysts, a Janus electrode is designed by adjusting the asymmetric wettability to achieve H2 O2 productivity of 264.8 mol kgcat -1 h-1 .

Fluorine dopants in tungsten sulfide boost the efficiency of H2O2 electro-synthesis via the oxygen reduction reaction

In this work, we report fluorine-doped tungsten sulfide as an exceptional electrocatalyst for H₂O₂ generation (95% at 0.6 V vs. RHE). The fluorine dopants boost the catalytic efficiency by reducing the binding strength between the catalytic center and OOH* species.

Morphology Control Strategy of Bimetallic MOF Nanosheets for Upgrading the Sensitivity of Noninvasive Glucose Detection

The precise measurement of glucose level is significant for the health management of the human body. However, the existing sensitive materials and detection methods for glucose are less satisfying for practical applications. Herein, an ultrathin reticular two-dimensional nanosheets array composed of trimesic acid (H₃BTC)-based bimetal metal-organic frameworks (MOFs) and carbon cloth (CC), which is constructed through a morphology control strategy, is reported for glucose sensing. Meanwhile, this nonmoving sweat glucose sensor based on a NiCo-BTC/CC electrode has been successfully prepared by a screen printing method. Benefiting from the regular and ultrathin nanosheets array, the NiCo-BTC/CC electrode has an excellent sensitivity of 2701.29 μA mM^-1 cm^-2, which is about 2.4 times that of its unregulated counterpart (1127.85 μA mM^-1 cm^-2) in the linear range 5-205 μM. In addition, an ultralow detection limit (0.09 μM, S/N = 3) and good selectivity of NiCo-BTC/CC were also obtained. The high sensitivity of the glucose sensor based on NiCo-BTC/CC electrode is 0.174 μA μM^-1 (50-1000 μM). Remarkably, the preciously designed sensor is used to detect glucose concentration in sweat with a noninvasive mode, and the results are basically consistent with those of a commercial glucose device with an invasive mode. This research exhibits potential methodology for the morphology design of bimetallic MOFs nanosheets to achieve a high accuracy rate and noninvasive and timeless measurement of a glucose sensor.

Identification of the Highly Active Co-N4 Coordination Motif for Selective Oxygen Reduction to Hydrogen Peroxide

Electrosynthesis of hydrogen peroxide (H2O2) through oxygen reduction reaction (ORR) is an environment-friendly and sustainable route for obtaining a fundamental product in the chemical industry. Co-N4 single-atom catalysts (SAC) have sparkled attention for being highly active in both 2e- ORR, leading to H2O2 and 4e- ORR, in which H2O is the main product. However, there is still a lack of fundamental insights into the structure-function relationship between CoN4 and the ORR mechanism over this family of catalysts. Here, by combining theoretical simulation and experiments, we unveil that pyrrole-type CoN4 (Co-N SACDp) is mainly responsible for the 2e- ORR, while pyridine-type CoN4 catalyzes the 4e- ORR. Indeed, Co-N SACDp exhibits a remarkable H2O2 selectivity of 94% and a superb H2O2 yield of 2032 mg for 90 h in a flow cell, outperforming most reported catalysts in acid media. Theoretical analysis and experimental investigations confirm that Co-N SACDp─with weakening O2/HOO* interaction─boosts the H2O2 production.

Electrosynthesis of H2O2 through a two-electron oxygen reduction reaction by carbon based catalysts: From mechanism, catalyst design to electrode fabrication

Hydrogen peroxide (H2O2) is an efficient oxidant with multiple uses ranging from chemical synthesis to wastewater treatment. The in-situ H2O2 production via a two-electron oxygen reduction reaction (ORR) will bring H2O2 beyond its current applications. The development of carbon materials offers the hope for obtaining inexpensive and high-performance alternatives to substitute noble-metal catalysts in order to provide a full and comprehensive picture of the current state of the art treatments and inspire new research in this area. Herein, the most up-to-date findings in theoretical predictions, synthetic methodologies, and experimental investigations of carbon-based catalysts are systematically summarized. Various electrode fabrication and modification methods were also introduced and compared, along with our original research on the air-breathing cathode and three-phase interface theory inside a porous electrode. In addition, our current understanding of the challenges, future directions, and suggestions on the carbon-based catalyst designs and electrode fabrication are highlighted.

Tuning Two-Electron Oxygen-Reduction Pathways for H2 O2 Electrosynthesis via Engineering Atomically Dispersed Single Metal Site Catalysts

The hydrogen peroxide (H₂ O₂ ) generation via the electrochemical oxygen reduction reaction (ORR) under ambient conditions is emerging as an alternative and green strategy to the traditional energy-intensive anthraquinone process and unsafe direct synthesis using H₂ and O₂ . It enables on-site and decentralized H₂ O₂ production using air and renewable electricity for various applications. Currently, atomically dispersed single metal site catalysts have emerged as the most promising platinum group metal (PGM)-free electrocatalysts for the ORR. Further tuning their central metal sites, coordination environments, and local structures can be highly active and selective for H₂ O₂ production via the 2e^- ORR. Herein, recent methodologies and achievements on developing single metal site catalysts for selective O₂ to H₂ O₂ reduction are summarized. Combined with theoretical computation and advanced characterization, a structure-property correlation to guide rational catalyst design with a favorable 2e^- ORR process is aimed to provide. Due to the oxidative nature of H₂ O₂ and the derived free radicals, catalyst stability and effective solutions to improve catalyst tolerance to H₂ O₂ are emphasized. Transferring intrinsic catalyst properties to electrode performance for viable applications always remains a grand challenge. The key performance metrics and knowledge during the electrolyzer development are, therefore, highlighted.

Molecule Confined Isolated Metal Sites Enable the Electrocatalytic Synthesis of Hydrogen Peroxide

The direct synthesis of hydrogen peroxide (H₂ O₂ ) through the two-electron oxygen reduction reaction is a promising alternative to the industrial anthraquinone oxidation process. Selectivity to H₂ O₂ is however limited by the four-electron pathway during oxygen reduction. Herein, it is reported that aminoanthraquinone confined isolated metal sites on carbon supports selectively steer oxygen reduction to H₂ O₂ through the two-electron pathway. Confining isolated NiN_x sites under aminoanthraquinone increases the selectivity to H₂ O₂ from below 55% to above 80% over a wide potential range. Spectroscopy characterization and density functional theory calculations indicate that isolated NiN_x sites are confined within a nanochannel formed between the molecule and the carbon support. The confinement reduces the thermodynamic barrier for OOH* desorption versus further dissociation, thus increasing the selectivity to H₂ O₂ . It is revealed how tailoring noncovalent interactions beyond the binding site can empower electrocatalysts for the direct synthesis of H₂ O₂ through oxygen reduction.

Theory-guided design of hydrogen-bonded cobaltoporphyrin frameworks for highly selective electrochemical H2O2 production in acid

The pursuit of selective two-electron oxygen reduction reaction to H2O2 in acids is demanding and largely hampered by the lack of efficient non-precious-metal-based electrocatalysts. Metal macrocycles hold promise, but have been relatively underexplored. Efforts are called for to promote their inherent catalytic activities and/or increase the surface exposure of active sites. In this contribution, we perform the high-throughput computational screening of thirty-two different metalloporphyrins by comparing their adsorption free energies towards key reaction intermediates. Cobalt porphyrin is revealed to be the optimal candidate with a theoretical overpotential as small as 40 mV. Guided by the computational predictions, we prepare hydrogen-bonded cobaltoporphyrin frameworks in order to promote the solution accessibility of catalytically active sites for H2O2 production in acids. The product features an onset potential at ~0.68 V, H2O2 selectivity of >90%, turnover frequency of 10.9 s-1 at 0.55 V and stability of ~30 h, the combination of which clearly renders it stand out from existing competitors for this challenging reaction.

Entropy Enhanced Perovskite Oxide Ceramic for Efficient Electrochemical Reduction of Oxygen to Hydrogen Peroxide

The electrochemical oxygen reduction reaction (ORR) offers a most promising and efficient route to produce hydrogen peroxide (H2 O2 ), yet the lack of cost-effective and high-performance electrocatalysts have restricted its practical application. Herein, an entropy-enhancement strategy has been employed to enable the low-cost perovskite oxide to effectively catalyze the electrosynthesis of H2 O2 . The optimized Pb(NiWMnNbZrTi)1/6 O3 ceramic is available on a kilogram-scale and displays commendable ORR activity in alkaline media with high selectivity over 91 % across the wide potential range for H2 O2 including an outstanding degradation property for organic dyes through the Fenton process. The exceptional performance of this perovskite oxide is attributed to the entropy stabilization-induced polymorphic transformation assuring the robust structural stability, decreased charge mobility as well as synergistic catalytic effects which we confirm using advanced in situ Raman, transient photovoltage, Rietveld refinement as well as finite elemental analysis.

Tailoring surface carboxyl groups of mesoporous carbon boosts electrochemical H2O2 production

Oxygen-doped porous carbon materials have been shown promising performance for electrochemical two-electron oxygen reduction reaction (2e^- ORR), an efficient approach for the safe and continuous on-site generation of H₂O₂. The regulation and mechanism understanding of active oxygen-containing functional groups (OFGs) remain great challenges. Here, OFGs modified porous carbon were prepared by thermal oxidation (MC-12-Air), HNO₃ oxidation (MC-12-HNO₃) and H₂O₂ solution hydrothermal treatment (MC-12-H₂O₂), respectively. Structural characterization showed that the oxygen doping content of three catalysts reached about 20%, with the almost completely maintained specific surface area (exception of MC-12- HNO₃). Spectroscopic characterization further revealed that hydroxyl groups are mainly introduced into MC-12-Air, while carboxyl groups are mainly introduced into MC-12- HNO₃ and MC-12- H₂O₂. Compared with the pristine catalyst, three oxygen-functionalized catalysts showed enhanced activity and H₂O₂ selectivity in 2e^- ORR. Among them, MC-12-H₂O₂ exhibited the highest catalytic activity and selectivity of 94 %, as well as a considerable HO₂^- accumulation of 46.2 mmol L^-1 and excellent stability in an extended test over 36 h in a H-cell. Electrochemical characterization demonstrated the promotion of OFGs on ORR kinetics and the greater contribution of carboxyl groups to the intrinsically catalytic activity. DFT calculations confirmed that the electrons are transferred from carboxyl groups to adjacent carbon and the enhanced adsorption strength toward *OOH intermediate, leading to a lower energy barrier for forming *OOH on carboxyl terminated carbon atoms.

Tafel Analysis Guided Optimization of ZnNP-O-C Catalysts for the Selective 2-Electron Oxygen Reduction Reaction in Neutral Media

The lack of characterizations of the adsorption capability toward intermediates during reactions causes difficulties in determining the structural optimization principle of the catalysts for the 2-electron oxygen reduction reaction (2e^- ORR). Here, a Tafel-θ method is proposed to evaluate the surface coverage (θ) of important intermediates (*OOH and *OH) on the material surface and further help optimize the catalyst. With the assistance of Tafel-θ analysis, a Zn nanoparticle incorporated oxygen-doped carbon (Zn_NP-O-C) catalyst with high 2e^- ORR performance (onset of ∼0.57 V and selectivity of >90.4%) in neutral media was achieved. Both the theoretical calculation and characterization results are consistent with the Tafel-θ deduction, revealing that an appropriate ratio of Zn nanoparticles and bridging O can optimize the *OOH adsorption/desorption strength of the adjacent carbon site. This study not only provides an advanced Zn_NP-O-C catalyst for electrochemical H₂O₂ production but also proposes a fast and precise method for the comprehensive assessment of future catalysts.

Boosting Oxygen Reduction for High-Efficiency H2 O2 Electrosynthesis on Oxygen-Coordinated CoNC Catalysts

Atomically dispersed CoNC is a promising material for H₂ O₂ selective electrosynthesis via a two-electron oxygen reduction reaction. However, the performance of typical CoNC materials with routine CoN₄ active center is insufficient and needs to be improved further. This can be done by fine-tuning its atomic coordination configuration. Here, a single-atom electrocatalyst (Co/NC) is reported that comprises a specifically penta-coordinated CoNC configuration (OCoN₂ C₂ ) with Co center coordinated by two nitrogen atoms, two carbon atoms, and one oxygen atom. Using a combination of theoretical predictions and experiments, it is confirmed that the unique atomic structure slightly increases the charge state of the cobalt center. This optimizes the adsorption energy towards *OOH intermediate, and therefore favors the two-electron ORR relevant for H₂ O₂ electrosynthesis. In neutral solution, the as-synthesized Co/NC exhibits a selectivity of over 90% over a potential ranging from 0.36 to 0.8 V, with a turnover frequency value of 11.48 s^-1 ; thus outperforming the state-of-the-art carbon-based catalysts.

Enhanced Electrochemical O2 -to-H2 O2 Synthesis Via Cu-Pb Synergistic Interplay

Electrocatalytic reduction of oxygen (O₂ ) to produce hydrogen peroxide (H₂ O₂ ) frequently suffers from the low activity and poor selectivity of catalysts owing to the lack of systematic strategies. The resulting enhancement to enable the further design of a new bimetallic catalyst with the synergistic interplay, as exemplified by Cu-Pb catalyst for two-electron oxygen reduction reaction (2e^- ORR), is reported here. Critically, in-depth evidence, including density functional theory (DFT) calculations, electrochemical signals, in-situ Raman, and H₂ O₂ -proof work, allude to a catalytic favor to the 2e^- ORR of Cu-Pb.

Highly efficient and selective electrocatalytic hydrogen peroxide production on Co-O-C active centers on graphene oxide

Electrochemical oxygen reduction provides an eco-friendly synthetic route to hydrogen peroxide (H2O2), a widely used green chemical. However, the kinetically sluggish and low-selectivity oxygen reduction reaction (ORR) is a key challenge to electrochemical production of H2O2 for practical applications. Herein, we demonstrate that single cobalt atoms anchored on oxygen functionalized graphene oxide form Co-O-C@GO active centres (abbreviated as Co1@GO for simplicity) that act as an efficient and durable electrocatalyst for H2O2 production. This Co1@GO electrocatalyst shows excellent electrochemical performance in O2-saturated 0.1 M KOH, exhibiting high reactivity with an onset potential of 0.91 V and H2O2 production of 1.0 mg cm-2 h-1 while affording high selectivity of 81.4% for H2O2. Our combined experimental observations and theoretical calculations indicate that the high reactivity and selectivity of Co1@GO for H2O2 electrogeneration arises from a synergistic effect between the O-bonded single Co atoms and adjacent oxygen functional groups (C-O bonds) of the GO present in the Co-O-C active centres.

Coupling Co-N-C with MXenes Yields Highly Efficient Catalysts for H2O2 Production in Acidic Media

The electrochemical oxygen reduction reaction (ORR) offers a promising method to replace the anthraquinone process for hydrogen peroxide (H₂O₂) production. However, the efficiency of this process suffers from sluggish kinetics, particularly in an acidic environment. Therefore, employing catalysts with high electroactivity is highly desirable for H₂O₂ synthesis. Here, an effective strategy for preparing Co-N-C/Ti₃C₂T_x with high H₂O₂ selectivity and ORR reactivity is proposed. The acquired Co-N-C/Ti₃C₂T_x shows excellent H₂O₂ electrosynthesis performance in acidic media with H₂O₂ productivity of up to 3200 ppm h^-1, superior to state-of-the-art catalysts. Interestingly, a H₂O₂ concentration of 6.0 wt % was obtained after the stability test, and the Co-N-C/Ti₃C₂T_x catalyst was found to effectively catalyze organic dye degradation. Further analysis reveals that the enhanced H₂O₂ electrosynthesis performance originates from the layered structure and the oxygen functional groups of Ti₃C₂T_x. The layered structure can effectively promote increased exposure of active sites, while the oxygen functional groups will fine-tune the electronic structure of Co atoms, allowing a selective ORR pathway to produce H₂O₂. This work provides a strategy to design and fabricate highly efficient catalysts for H₂O₂ production and degradation of organic pollutants.

Hydrogen spillover in complex oxide multifunctional sites improves acidic hydrogen evolution electrocatalysis

Improving the catalytic efficiency of platinum for the hydrogen evolution reaction is valuable for water splitting technologies. Hydrogen spillover has emerged as a new strategy in designing binary-component Pt/support electrocatalysts. However, such binary catalysts often suffer from a long reaction pathway, undesirable interfacial barrier, and complicated synthetic processes. Here we report a single-phase complex oxide La₂Sr₂PtO_7+δ as a high-performance hydrogen evolution electrocatalyst in acidic media utilizing an atomic-scale hydrogen spillover effect between multifunctional catalytic sites. With insights from comprehensive experiments and theoretical calculations, the overall hydrogen evolution pathway proceeds along three steps: fast proton adsorption on O site, facile hydrogen migration from O site to Pt site via thermoneutral La-Pt bridge site serving as the mediator, and favorable H₂ desorption on Pt site. Benefiting from this catalytic process, the resulting La₂Sr₂PtO_7+δ exhibits a low overpotential of 13 mV at 10 mA cm⁻², a small Tafel slope of 22 mV dec⁻¹, an enhanced intrinsic activity, and a greater durability than commercial Pt black catalyst.

While renewable H₂ production offers a promising route for clean energy production, there is an urgent need to improve catalyst performances. Here, authors design a Pt-containing complex oxide that utilizes atomic-scale hydrogen spillover to promote H₂ evolution electrocatalysis in acidic media.

Sulfide with Oxygen-Rich Carbon Network for Good Lithium-Storage Kinetics

Transition metal sulfides are of great interest as electrode material for alkali metal-ion batteries due to their high theoretical capacity. However, sluggish ion migration and electron transfer kinetics lead to poor cycling stability and rate performance, which hinders their practical applications. Herein, we develop a two-step localized carbonization and sulfurization method to construct a CoS₂ composite material (CoS₂@CNTs@C) from an in situ integrated zeolitic imidazolate framework (ZIF-67) and multiwalled carbon nanotube precursor (ZIF-67@CNTs). The as-prepared CoS₂@CNTs@C composites with a nanoscale carbon skeleton inherit a large specific surface area and suitable nanopore size distribution from ZIF-67 and incredibly abundant oxygenated functional groups from CNTs. The theoretical calculation and material characterization demonstrate that the oxygenated functional groups on the porous carbon networks accelerate lithium-ion diffusion and electron transfer and especially electrocatalyze the progressive conversion of Li₂S₆ to the final product Li₂S. Meanwhile, the three-dimensional conductive network guarantees the conductive and structural stability of CoS₂@CNTs@C during the repeated lithium-storage process. Therefore, the CoS₂@CNTs@C electrode material can deliver an initial discharge capacity of 1282.3 mA h g^-1 at 200 mA g^-1 with a high Coulombic efficiency of 93.5% and a reversible capacity of 558.8 mA h g^-1 at 2000 mA g^-1 in 600 cycles with a high capacity retention of 96.1%.

In Situ Construction of Bifunctional N-Doped Carbon-Anchored Co Nanoparticles for OER and ORR

Designing highly active and more durable oxygen electrocatalysts for regenerative metal-air batteries and water splitting is of practical significance. Herein, an advanced Co/N-C-800 catalyst composed of abundant Co-N_x structures and carbon defects derived from cobalt phthalocyanine is synthesized. Remarkably, this catalyst exhibits favorable catalytic performance toward the oxygen evolution reaction (OER) with a receivable overpotential of 274 mV in an alkaline medium achieving a current density of 10 mA cm^-2 and a Tafel slope of 43.6 mV decade^-1, outperforming the commercial RuO₂ catalyst. It further displays a high half-wave potential (0.82 V) for the oxygen reduction reaction in 0.1 M KOH. Theoretical calculations reveal that the Co-N_x active sites along with the carbon defects can decrease the adsorption energy of intermediates (OH*, O*, and OOH*) and enhance the electron-transfer ability, thus boosting the OER process.

Electrochemical Hydrogen Peroxide Synthesis from Selective Oxygen Reduction over Metal Selenide Catalysts

Se-based nanoalloys as an emerging class of metal chalcogenide with tunable crystalline structure, component distribution, and electronic structure have attracted considerable interest in renewable energy conversion and utilization. In this Letter, we report a series of nanosized M-Se catalysts (M = Cu, Ni, Co) as prepared from laser ablation method and screen their electrocatalytic performance for onsite H₂O₂ generation from selective oxygen reduction reaction (ORR) in alkaline media. A flexible control on 2e^-/4e^- ORR pathway has been achieved by engineering the alloying component. Moreover, through a feedback loop between theory and experiment an optimized scaling relationship between oxygenated ORR intermediates has been discovered on cubic Cu_7.2Se₄ nanocrystals, that is, the ensemble effect of isolated Cu component destabilizes O* binding while the ligand effect of Se to Cu fine-tunes the binding strength of OOH*, leading to a superb H₂O₂ selectivity above 90% over a wide potential window even after 1400 potential cycles.

Nanocatalytic Materials for Energy-Related Small-Molecules Conversions: Active Site Design, Identification and Structure-Performance Relationship Discovery

The catalytic conversion of energy-related small-molecules is a critical process in the fields of chemical production, environmental restoration, and energy conversion and storage. Over the years, numerous nanocatalytic materials have been explored in efforts to substantially boost the inherently sluggish catalytic processes. Despite achievements, the lack of fundamental insights into the design and identification of active sites and the structure-performance relationship has been one of the main obstacles to further improvement in catalytic performance. With the development of first-principles density functional theory (DFT) calculations and state-of-art spectroscopic techniques, the pace of research has started to move forward again.In this Account, we illustrate our recent representative attempts to gain fundamental insights into the rational development of efficient nanocatalytic materials and thus boost the typical electrochemical and mechanochemical conversions of energy-related small-molecules, including for the hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), and ammonia synthesis. DFT calculations and advanced spectroscopic techniques, such as synchrotron radiation-based X-ray absorption spectroscopy (XAS, hard and soft X-ray), were properly adopted for this purpose.Specifically, to achieve a fast-electrochemical hydrogen evolution process, Ir active sites with balanced hydrogen adsorption/desorption behaviors were first computationally designed via orbital modulation and experimentally identified, and they showed significantly enhanced catalytic activity toward HER in acidic media. For the electrochemical reduction of oxygen, well-designed Zn-N₂ active sites and quinone functional groups were introduced into the different carbon matrixes and structurally identified by the XAS technique, utilizing hard and soft X-rays, respectively. Both experimental and DFT studies revealed that Zn-N₂ active sites with their unique structure can greatly activate the adsorbed oxygen species, leading to a highly efficient and selective four-electron oxygen reduction pathway, while the quinone functional groups are able to modify the activation mode and alter it into a selective two-electron oxygen reduction pathway for H₂O₂ production.In another study, inspired by the dissociation of stable nitrogen molecules on the surface of Fe, dynamic strained Fe active sites were designed for mechanochemical ammonia synthesis. Combined XAS and Mössbauer spectroscopy revealed the formation of a short-range Fe₄N structure by the Fe active sites and dissociated nitrogen during the ball milling process, facilitating robust hydrogenation and ammonia production under mild conditions.Thanks to the theoretical methods and advanced spectroscopic techniques, fundamental insights into the design and identification of active sites and understanding of the structure-performance relationship can be easily obtained using such tools, which will guide the development of nanocatalytic materials and boost the conversions of energy-related small-molecules for various applications.

Deciphering the selectivity descriptors of heterogeneous metal phthalocyanine electrocatalysts for hydrogen peroxide production

The electrocatalytic 2e⁻ oxygen reduction reaction (2e⁻ ORR) provides an appealing pathway to produce hydrogen peroxide (H₂O₂) in a decentralized and clean manner, which drives the demand for developing high selectivity electrocatalysts. However, current understanding on selectivity descriptors of 2e⁻ ORR electrocatalysts is still insufficient, limiting the optimization of catalyst design. Here we study the catalytic performances of a series of metal phthalocyanines (MPcs, M = Co, Ni, Zn, Cu, Mn) for 2e⁻ ORR by combining density functional theory calculations with electrochemical measurements. Two descriptors (ΔG_*O − ΔG_*OOH and ΔG_*H2O2) are uncovered for manipulating the selectivity of H₂O₂ production. ΔG_*O − ΔG_*OOH reflects the preference of O–O bond breaking of *OOH, affecting the intrinsic selectivities. Due to the high value of ΔG_*O − ΔG_*OOH, the molecularly dispersed electrocatalyst (MDE) of ZnPc on carbon nanotubes exhibits high selectivity, even superior to the previously reported NiPc MDE. ΔG_*H2O2 determines the possibility of further H₂O₂ reduction to affect the measured selectivities. Enhancing the hydrophobicity of the catalytic layer can increase ΔG_*H2O2, leading to selectivity improvement, especially under high H₂O₂ production rates. In the gas diffusion electrode measurements, both ZnPc and CoPc MDEs with polytetrafluoroethylene (PTFE) exhibit low overpotentials, high selectivities, and good stability. This study provides guidelines for rational design of 2e⁻ ORR electrocatalysts.

Two selectivity descriptors for the 2e⁻ oxygen reduction reaction are found on molecularly dispersed electrocatalysts of metal phthalocyanines anchored on carbon nanotubes. The optimized catalysts can produce H₂O₂ with high selectivity at high rates.

Oxygen vacancy on Nb2O5 enhanced the performance of H2O2 electrosynthesis from O2 reduction

A serial oxygen vacancy (OV) on Nb2O5 is synthesised by H2 calcination, the H-300 exhibited high selectivity and activity of H2O2 (93.4%, 562.5 mmol gcat-1). The volcano relationship is identified...

Electronic Structure Regulation of Single-Atom Catalysts for Electrochemical Oxygen Reduction to H2 O2

Electrochemical synthesis of hydrogen peroxide (H₂ O₂ ) via the 2-electron oxygen reduction reaction (ORR) has emerged as a promising alternative to the energy-intensive anthraquinone process and catalysts combining high selectivity with superior activity are crucial for enhancing the efficiency of H₂ O₂ electrosynthesis. In recent years, single-atom catalysts (SACs) with the merits of maximum atom utilization efficiency, tunable electronic structure, and high mass activity have attracted extensive attention for the selective reduction of O₂ to H₂ O₂ . Although considerable improvements are made in the performance of SACs toward the 2-electron ORR process, the principles for modulating the catalytic properties of SACs by adjusting the electronic structure remain elusive. In this review, the regulation strategies for optimizing the 2-electron ORR activity and selectivity of SACs by different methods of electronic structure tuning, including the altering of the central metal atoms, the modulation of the coordinated atoms, the substrate effect, and alloy engineering are summarized. Finally, the challenges and future prospects of advanced SACs for H₂ O₂ electrosynthesis via the 2-electron ORR process are proposed.

Carbon-Based Electrocatalysts for Efficient Hydrogen Peroxide Production

Hydrogen peroxide (H₂ O₂ ) is an environment-friendly and efficient oxidant with a wide range of applications in different industries. Recently, the production of hydrogen peroxide through direct electrosynthesis has attracted widespread research attention, and has emerged as the most promising method to replace the traditional energy-intensive multi-step anthraquinone process. In ongoing efforts to achieve highly efficient large-scale electrosynthesis of H₂ O₂ , carbon-based materials have been developed as 2e^- oxygen reduction reaction catalysts, with the benefits of low cost, abundant availability, and optimal performance. This review comprehensively introduces the strategies for optimizing carbon-based materials toward H₂ O₂ production, and the latest advances in carbon-based hybrid catalysts. The active sites of the carbon-based materials and the influence of coordination heteroatom doping on the selectivity of H₂ O₂ are extensively analyzed. In particular, the appropriate design of functional groups and understanding the effect of the electrolyte pH are expected to further improve the selective efficiency of producing H₂ O₂ via the oxygen reduction reaction. Methods for improving catalytic activity by interface engineering and reaction kinetics are summarized. Finally, the challenges carbon-based catalysts face before they can be employed for commercial-scale H₂ O₂ production are identified, and prospects for designing novel electrochemical reactors are proposed.

Understanding the activity origin of oxygen-doped carbon materials in catalyzing the two-electron oxygen reduction reaction towards hydrogen peroxide generation

Oxygen-doped carbon materials (OCM) have received a lot of attention for catalyzing the two-electron oxygen reduction reaction (2eORR) towards hydrogen peroxide generation, but the origin of their activity is not well understood. Based on density functional theory calculations, we introduce the Fukui function (f⁰), a more comprehensive and accurate method for identifying active sites and systematically investigating the activity of carbon materials doped with typical oxygen functional groups (OGs). According to the results, only ether or carbonyl has the potential to become the activity origin. The 2eORR activities of carbon materials co-doped by different OGs were then investigated, and a significant synergistic effect was discovered between different OGs (particularly between epoxy and other OGs), which might be the real active centers in OCM. To further understand the cause of the activity, the Fundamental Gap (E_g) was introduced to investigate the ability of various OCM to gain and lose electrons. The results show that the decrease in overpotential after oxygen co-doping can be attributed to the decrease in E_g. This work introduces descriptors (f⁰ and E_g) that can aid in the efficient design of catalysts and adds to our understanding of the 2eORR activity origin of OCM.

Effect of Coordination Environment Surrounding a Single Pt Site on the Liquid-Phase Aerobic Oxidation of 5-Hydroxymethylfurfural

As the frontier in heterogeneous catalyst, a monomer and positively charged active sites in the single-atom catalyst (SAC), anchored by high electronegative N, O, S, P, etc., atoms, may not be active for the multispecies (O₂, substrates, intermediates, solvent etc.) involved liquid-phase aerobic oxidation. Here, with catalytic, aerobic oxidation of 5-hydroxymethylfurfural as an example, Pt SAC (Pt₁-N₄) was synthesized and tested first. With commercial Pt/C (Pt loading of 5 wt %) as a benchmark, 2,5-furandicarboxylic acid (FDCA) yield of 97.6% was obtained. Pt SAC (0.56 wt %) gave a much lower FDCA yield (28.8%). By changing the coordination atoms from highly electronegative N to low electronegative Co atoms, the prepared Pt single-atom alloy (SAA, Pt₁-Co₃) catalyst with ultralow Pt loading (0.06 wt %) gave a much high FDCA yield (99.6%). Density functional theory (DFT) calculations indicated that positively charged Pt sites (+0.712e) in Pt₁-N₄ almost lost the capability for oxygen adsorption and activation, as well as the adsorption for the key intermediate. In Pt₁-Co₃ SAA, the central negatively charged Pt atom (-0.446e) facilitated the adsorption of the key intermediate; meanwhile, the nearby Co atoms around the Pt atom constituted the O₂-preferred adsorption/activation sites. This work shows the difference between the SAC with NPs and the SAA during liquid-phase oxidation of HMF and gives a useful guide in the future single-atom catalyst design in other related reactions.

Nanoporous Graphene via a Pressing Organization Calcination Strategy for Highly Efficient Electrocatalytic Hydrogen Peroxide Generation

Nanoporous graphenes (NPGs) have recently attracted huge attention owing to their designable structures and diverse properties. Many important properties of NPGs are determined by their structural regularity and homogeneity. The mass production of NPGs with periodic well-defined pore structures under a solvent-free green synthesis poses a great challenge and is largely unexplored. A facile synthetic strategy of NPGs via pressing organization calcination (POC) of readily available halogenated polycyclic aromatic hydrocarbons is developed. The gram-scale synthesized NPGs have ordered structures and possess well-defined nanopores, which can be easily exfoliated to few layers and oxidized in controllable approaches. After being decorated with oxygen species, the oxidized NPGs with tunable catalytic centers exhibit high activity, selectivity, and stability toward electrochemical hydrogen peroxide generation.

Anchoring Sites Engineering in Single-Atom Catalysts for Highly Efficient Electrochemical Energy Conversion Reactions

Single-atom catalysts (SACs) have been at the frontier of research field in catalysis owing to the maximized atomic utilization, unique structures and properties. The atomically dispersed and catalytically active metal atoms are necessarily anchored by surrounding atoms. As such, the structure and composition of anchoring sites significantly influence the catalytic performance of SACs even with the same metal element. Significant progress has been made to understand structure-activity relationships at an atomic level, but in-depth understanding in precisely designing highly efficient SACs for the targeted reactions is still required. In this review, various anchoring sites in SACs are summarized and classified into five different types (doped heteroatoms, defect sites, surface atoms, metal sites, and cavity sites). Then, their impacts on catalytic performance are elucidated for electrochemical reactions based on their distance from the metal center (first coordination shell and beyond). Further, SACs anchored on two typical types of hosts, carbon- and metal-based materials, are highlighted, and the effects of anchoring points on achieving the desirable atomic structure, catalytic performance, and reaction pathways are elaborated. At last, insights and outlook to the SAC field based on current achievements and challenges are presented.

Nanoscaled and Atomic Ruthenium Electrocatalysts Confined Inside Super-Hydrophilic Carbon Nanofibers for Efficient Hydrogen Evolution Reaction

A series of Ru-based catalysts have been developed for the hydrogen evolution reaction (HER) by the facile impregnation of copious and eco-friendly bacterial cellulose (BC) with Ru(bpy)₃ Cl₂ (bpy = 2,2'-bipyridine) followed by pyrolysis. After the oxidation and molecular recomposition processes that occur within the BC precursors during pyrolysis, sub-2 nm Ru nanoparticles (NPs) and atomic Ru species confined within surface-oxidized N-doped carbon nanofibers (CNFs) can be observed in the derived catalysts. The surface oxidation of CNFs leads the derived catalysts with super hydrophilicity and water-absorbing capacity, and also provides dimensional confinement for the nanoscaled and atomic Ru species. With these added structural advantages and the component synergy, the derived catalysts show superior HER activities, for which the overpotentials are as low as 19.6 mV (1 m KOH) and 55.0 mV (0.5 m H₂ SO₄ ) for the most active case at the current density of 10 mA cm^-2 . Moreover, superior HER activity can be also achieved for the catalysts derived with a wide range of Ru loadings. Finally, the influence of Ru NP size on HER activity is investigated by density functional theory simulations. This method provides a reliable protocol for preparing highly active HER catalysts for scale-up applications.

Janus graphite felt cathode dramatically enhance the H2O2 yield from O2 electroreduction by the hydrophilicity-hydrophobicity regulation

Hydrogen peroxide (H₂O₂) electrosynthesis from 2-electron O₂ reduction reaction (2eORR) is widely regarded as a promising alternative to the current industry-dominant anthraquinone process. Design and fabrication of effective, low-cost carbon-based electrodes is one of the priorities. Many previous work well confirmed that hydrophilic carbon-based electrodes are preferable for 2eORR. Here, we proposed a strategy of hydrophilicity-hydrophobicity regulation. By using commercially available graphite felt (GF) as electrodes, we showed that both hydrophilic GF, hydrophobic GF, and Janus GF yielded significantly higher H₂O₂ production, which is 7.3 times, 7.6 times, and 7.7 times higher than the original GF, respectively. Results showed that currents and stirring rates affect the H₂O₂ yields. The enhancement of hydrophilic GF is due to the incorporation of oxygen-containing functional groups, while the hydrophobic and Janus GF comes from the locally confined O₂ bubbles, which built a gas-liquid-solid interface inside GF and thus enhance the H₂O₂ formation kinetics. Finally, the effectiveness of the hydrophilicity-hydrophobicity regulation concept was tested in Electro-Fenton process by removing typical dyes and antibiotics. This work supply an effective but facile strategy to enhance the performance of carbon-based electrodes towards 2eORR by regulating the micro-environment of electrodes.

Highly efficient metal-free electro-Fenton degradation of organic contaminants on a bifunctional catalyst

Heterogeneous electro-Fenton (e-Fenton) is a promising technology for the treatment of persistent organic pollutants, in which H₂O₂ is produced via 2e^- oxygen reduction and is simultaneously activated into •OH by the iron-based catalyst. This system often suffers from the inevitable metal dissolution in the acidic or even neutral environment, leading to poor pH adaptation and low stability. In this work, we designed a metal-free e-Fenton system, using O-doped carbon nanotubes (OCNTs) as the bifunctional metal-free cathode for the degradation of organic pollutants. The system showed the excellent e-Fenton performance under neutral conditions with the phenol degradation kinetic constant of 0.071 min^-1, and the corresponding TOC removal was 76.6% within 300 min. It also exhibited excellent performance for actual coking wastewater treatment with the specific energy consumption of 7.4 kW h kg^-1 COD^-1, which was lower than that reported heterogeneous electro-Fenton system (9.2-14.4 kW h kg^-1 COD^-1). The in-situ metal-free e-Fenton system could be regarded as a promising strategy for actual wastewater treatment.

Transforming C60 Molecules into Polyhedral Carbon Micro-Nano Shells for Electrochemically Producing H2O2 in Neutral Electrolytes

The electrochemical production of hydrogen peroxide (H₂O₂) via the two-electron oxygen reduction reaction (ORR) can realize the customer-oriented onsite synthesis of H₂O₂ in a green and sustainable method. The ongoing challenge that needs to be solved is the fabrication of robust electrocatalysts of excellent performance. In this work, C₆₀ was selected as a precursor due to its uniform structure and abundant pentagon rings. Thanks to the strong interaction between C₆₀ and thiophene, after heteromolecule assembly in the liquid reaction and subsequent reconstruction of the carbon topological structure in solid calcination, C₆₀ was successfully transformed into polyhedral carbon micro-nano shells (PCMNS) with an effective pore structure for the first time, which exhibited excellent capacity for production of H₂O₂ via two-electron ORR, especially in neutral media. In addition to the high onset potential (0.49 V vs reversible hydrogen electrode (RHE)) and low Tafel slope (72 mV dec^-1), its selectivity reached >90% within the potential range of 0.30-0.45 V and maintained >80% after constant potential electrolysis for 10 h. The yield rate of H₂O₂ was 1102.5 mmol g_cat^-1 h^-1, determined by an H-type electrolytic cell, which was one of the highest values of metal-free carbon-based ORR electrocatalysts ever reported. Such excellent two-electron ORR performance of PCMNS was attributed to its abundant accessible active sites and hierarchical pore structures.

Recent Progress of Electrochemical Production of Hydrogen Peroxide by Two-Electron Oxygen Reduction Reaction

Shifting electrochemical oxygen reduction reaction (ORR) via two-electron pathway becomes increasingly crucial as an alternative/green method for hydrogen peroxide (H2 O2 ) generation. Here, the development of 2e- ORR catalysts in recent years is reviewed, in aspects of reaction mechanism exploration, types of high-performance catalysts, factors to influence catalytic performance, and potential applications of 2e- ORR. Based on the previous theoretical and experimental studies, the underlying 2e- ORR catalytic mechanism is firstly unveiled, in aspect of reaction pathway, thermodynamic free energy diagram, limiting potential, and volcano plots. Then, various types of efficient catalysts for producing H2 O2 via 2e- ORR pathway are summarized. Additionally, the catalytic active sites and factors to influence catalysts' performance, such as electronic structure, carbon defect, functional groups (O, N, B, S, F etc.), synergistic effect, and others (pH, pore structure, steric hindrance effect, etc.) are discussed. The H2 O2 electrogeneration via 2e- ORR also has various potential applications in wastewater treatment, disinfection, organics degradation, and energy storage. Finally, potential future directions and prospects in 2e- ORR catalysts for electrochemically producing H2 O2 are examined. These insights may help develop highly active/selective 2e- ORR catalysts and shape the potential application of this electrochemical H2 O2 producing method.

Chemical Identification of Catalytically Active Sites on Oxygen-doped Carbon Nanosheet to Decipher the High Activity for Electro-synthesis Hydrogen Peroxide

Electrochemical production of hydrogen peroxide (H₂ O₂ ) through two-electron (2 e^- ) oxygen reduction reaction (ORR) is an on-site and clean route. Oxygen-doped carbon materials with high ORR activity and H₂ O₂ selectivity have been considered as the promising catalysts, however, there is still a lack of direct experimental evidence to identify true active sites at the complex carbon surface. Herein, we propose a chemical titration strategy to decipher the oxygen-doped carbon nanosheet (OCNS₉₀₀ ) catalyst for 2 e^- ORR. The OCNS₉₀₀ exhibits outstanding 2 e^- ORR performances with onset potential of 0.825 V (vs. RHE), mass activity of 14.5 A g^-1 at 0.75 V (vs. RHE) and H₂ O₂ production rate of 770 mmol g^-1  h^-1 in flow cell, surpassing most reported carbon catalysts. Through selective chemical titration of C=O, C-OH, and COOH groups, we found that C=O species contributed to the most electrocatalytic activity and were the most active sites for 2 e^- ORR, which were corroborated by theoretical calculations.

Efficient Electrochemical Production of H2O2 on Hollow N-Doped Carbon Nanospheres with Abundant Micropores

Electrocatalytic two-electron (2e-) oxygen reduction reaction (ORR) has been regarded as an efficient strategy to achieve onsite H2O2 generation under ambient conditions. However, due to the sluggish kinetics and competitive reaction between 2e- and 4e- ORR, exploring more efficient ORR catalysts with dominant 2e- ORR selectivity is of significance. Herein, hollow N-doped carbon spheres (HNCS) with abundant micropores through a template-directed method are presented. Consequently, the selectivity of the HNCS reaches ∼91.9% at 0.7 V (vs RHE), and the output for H2O2 production is up to 618.5 mmol gcatalyst-1 h-1 in 0.1 M KOH solution. The enhanced performance of HNCS for H2O2 electrosynthesis could be attributed to the hollow structure and heteroatom/defect/pore incorporation. The strategy presented here could shed light on the design of efficient carbon-based materials for improved 2e- ORR.

Co/CoOx heterojunctions encapsulated N-doped carbon sheets via a dual-template-guided strategy as efficient electrocatalysts for rechargeable Zn-air battery

Developing highly efficient oxygen electrocatalysts is of vital importance for rechargeable Zn-air batteries (ZABs). Herein, Co/CoO_x nano-heterojunctions encapsulated into nitrogen-doped carbon sheets (NCS@Co/CoO_x) are fabricated via a dual-template-guided approach by using zeolitic imidazolate frameworks (ZIFs) as templates. The synergistic integration of structural and compositional advantages endows such catalyst with superior catalytic properties to benchmark noble-metal catalysts. To be specific, the hierarchical micro/mesopores affords massive mass transport channels and maximizes the exposure of accessible active sites, whereas the NCS matrix accelerates electron transfer and prevents the self-aggregation of active species during the electrocatalytic reaction. Moreover, abundant and synergistic Co-based active sites (CoO, Co₃O₄, Co-N_x) greatly promote the catalytic activity. As the cathode of both liquid and flexible solid-state ZABs, excellent device properties are achieved, outperforming those assembled with commercial Pt/C+RuO₂ catalyst. This work presents a feasible and cost-effective strategy for developing oxygen electrocatalysts derived from ZIFs templates.