Weakly Humidity-Dependent Proton-Conducting COF Membranes

An Ionic Diode Covalent Organic Framework Membrane for Efficient Osmotic Energy Conversion

Heterogeneous membranes that exhibit an ionic diode effect are promising candidates for osmotic energy conversion. However, existing heterogeneous membranes lack molecular-level designed ion channels, thereby limiting their power densities. Here, we demonstrate ionic diode covalent organic framework (COF) membranes with well-defined ion channels, asymmetric geometry and surface charge polarity as high-performance osmotic power generators. The COF diode membranes are comprised of heterojunctions combining a positively charged ultrathin COF layer and a negatively charged COF layer supported by a porous COF nanofiber scaffold, exhibiting an ionic diode effect that effectuates fast unidirectional ion diffusion and anion selectivity. Density functional theory calculations reveal that the differentiated interactions between anions and COF channels contributed to superior I^- transport over other anions. Consequently, the COF diode membranes achieved high output power densities of 19.2 and 210.1 W m^-2 under a 50-fold NaCl and NaI gradient, respectively, outperforming state-of-the-art heterogeneous membranes. This work suggests the great potential of COF diode membranes for anion transport and energy-related applications.

Supramolecular Anchoring of Polyoxometalate Amphiphiles into Nafion Nanophases for Enhanced Proton Conduction

Advanced proton exchange membranes (PEMs) are highly desirable in emerging sustainable energy technology. However, the further improvement of commercial perfluorosulfonic acid PEMs represented by Nafion is hindered by the lack of precise modification strategy due to their chemical inertness and low compatibility. Here, we report the robust assembly of polyethylene glycol grafted polyoxometalate amphiphile (GSiW₁₁) into the ionic nanophases of Nafion, which largely enhances the comprehensive performance of Nafion. GSiW₁₁ can coassemble with Nafion through multiple supramolecular interactions and realize a stable immobilization. The incorporation of GSiW₁₁ can increase the whole proton content in the system and induce the hydrated ionic nanophase to form a wide channel for proton transport; meanwhile, GSiW₁₁ can reinforce the Nafion ionic nanophase by noncovalent cross-linking. Based on these synergistic effects, the hybrid PEMs show multiple enhancements in proton conductivity, tensile strength, and fuel cell power density, which are all superior to the pristine Nafion. This work demonstrates the intriguing advantage of molecular nanoclusters as supramolecular enhancers to develop high-performance electrolyte materials.

Aqueous Two-Phase Interfacial Assembly of COF Membranes for Water Desalination

Aqueous two-phase system features with ultralow interfacial tension and thick interfacial region, affording unique confined space for membrane assembly. Here, for the first time, an aqueous two-phase interfacial assembly method is proposed to fabricate covalent organic framework (COF) membranes. The aqueous solution containing polyethylene glycol and dextran undergoes segregated phase separation into two water-rich phases. By respectively distributing aldehyde and amine monomers into two aqueous phases, a series of COF membranes are fabricated at water-water interface. The resultant membranes exhibit high NaCl rejection of 93.0-93.6% and water permeance reaching 1.7-3.7 L m^-2 h^-1 bar^-1, superior to most water desalination membranes. Interestingly, the interfacial tension is found to have pronounced effect on membrane structures. The appropriate interfacial tension range (0.1-1.0 mN m^-1) leads to the tight and intact COF membranes. Furthermore, the method is extended to the fabrication of other COF and metal-organic polymer membranes. This work is the first exploitation of fabricating membranes in all-aqueous system, confering a green and generic method for advanced membrane manufacturing.

Short hydrogen-bond network confined on COF surfaces enables ultrahigh proton conductivity

The idea of spatial confinement has gained widespread interest in myriad applications. Especially, the confined short hydrogen-bond (SHB) network could afford an attractive opportunity to enable proton transfer in a nearly barrierless manner, but its practical implementation has been challenging. Herein, we report a SHB network confined on the surface of ionic covalent organic framework (COF) membranes decorated by densely and uniformly distributed hydrophilic ligands. Combined experimental and theoretical evidences have pointed to the confinement of water molecules allocated to each ligand, achieving the local enrichment of hydronium ions and the concomitant formation of SHBs in water-hydronium domains. These overlapped water-hydronium domains create an interconnected SHB network, which yields an unprecedented ultrahigh proton conductivity of 1389 mS cm⁻¹ at 90 °C, 100% relative humidity.

When hydronium ions are enriched in confined water, short hydrogen bonds (SHBs) form due to the constrained space of excess protons between pairs of water molecules. Here authors demonstrate a SHB network confined on the surface of ionic COF membranes with tunable -SO₃H groups, with proton conductivity of 1389 mS cm^-1 at 90 ^oC.

Ultrathin Covalent Organic Framework Membranes Prepared by Rapid Electrophoretic Deposition

Covalent organic frameworks (COFs) are a disruptive material platform for various novel applications including nanofiltration for water purification due to their excellent physicochemical features. Nevertheless, the currently available approaches for preparing COF membranes need stringent synthesis conditions, prolonged fabrication time, and tedious post-processing, leading to poor productivity. Herein, a simple and efficient layer-by-layer stacking assembly strategy is developed based on electrophoretic deposition (EPD) to rapidly generate ionic COF membranes due to the uniform driving force for nanosheet assembly. A new two-cell EPD design avoids the usual EPD problems such as bubbles and acidic/alkaline microenvironments in the near-electrode region in aqueous EPD processes. Ultrathin COF membranes with homogenous structures can be produced within several minutes. Consequently, the prepared COF membranes exhibit outstanding permselectivity and possess good stability and anti-pressure ability due to their uniform architecture and unique chemical composition.

Covalent organic framework-based porous ionomers for high-performance fuel cells

Lowering platinum (Pt) loadings without sacrificing power density and durability in fuel cells is highly desired yet challenging because of the high mass transport resistance near the catalyst surfaces. We tailored the three-phase microenvironment by optimizing the ionomer by incorporating ionic covalent organic framework (COF) nanosheets into Nafion. The mesoporous apertures of 2.8 to 4.1 nanometers and appendant sulfonate groups enabled the proton transfer and promoted oxygen permeation. The mass activity of Pt and the peak power density of the fuel cell with Pt/Vulcan (0.07 mg of Pt per square centimeter in the cathode) both reached 1.6 times those values without the COF. This strategy was applied to catalyst layers with various Pt loadings and different commercial catalysts.

Facile, Direct, De Novo Synthesis of an Alkyl Phosphoric Acid-Decorated Covalent Organic Framework

The development and understanding of proton conductors based on phosphoric acid are critical for the field of chemistry, biology, and energy. Covalent organic frameworks (COFs), featuring highly crystalline structures and controllable pore sizes, are suitable for constructing phosphoric acid-based proton conductors. However, because of tedious and intricate synthesis, how to develop COFs based on phosphoric acid remains a substantial challenge. Herein, we contributed a side-chain decorated strategy to construct a phosphoric acid-functionalized, imine-linked COF by de novo synthesis. The phosphoric acid side chains with vigorous motion integrating with 1D nanochannels endow the resulting COF with intrinsic proton conductivity. This work expectantly provides a competitive alternative for producing phosphoric acid-functionalized COFs with high intrinsic proton conductivity. This article is protected by copyright. All rights reserved.

In Situ Growth of Covalent Organic Framework Nanosheets on Graphene as the Cathode for Long-Life High-Capacity Lithium-Ion Batteries

The poor electronic and ionic conductivities of covalent organic frameworks (COFs) severely restrict the development of COF-based electrodes for practical rechargeable batteries, therefore inspiring more research interest from the direction of both material synthesis and technology. Herein, a dual-porous COF, USTB-6, with good crystallinity and rich redox-active sites is conceived and fabricated by the polymerization of 2,3,8,9,14,15-hexa(4-formylphenyl)diquinoxalino [2,3-a:2',3'-c]phenazine and 2,7-diaminopyrene-4,5,9,10-tetraone. In particular, the heterogeneous polymerization of the same starting materials in the presence of graphene affords uniformly dispersed COF nanosheets with a thickness of 8.3 nm on a conductive carbon substrate, effectively enhancing the electronic conductivity of the COF-based electrode. Such a graphene-supported USTB-6 nanosheets cathode when used in a lithium-ion battery exhibits a specific capacity of 285 mA h g^-1 at a current density of 0.2 C and excellent rate performance with a prominent capacity of 188 mA h g^-1 at 10 C. More importantly, a capacity of 170 mA h g^-1 is retained by using the USTB-6 nanosheets cathode after 6000 cycles charge and discharge measurement at 5 C.

Highly Effective Proton-Conductive Matrix-Mixed Membrane Based on a -SO3H-Functionalized Polyphosphazene

A polyphosphazene with in-built -SO₃H moieties (PP-PhSO₃H) was facilely synthesized by the polymeric combination of hexachlorocyclotriphosphazene (HCCP) and sulfonate p-phenylenediamine. Characterization reveals that it is a highly stable amorphous polymer. Proton conductivity investigations showed that the synthesized PP-PhSO₃H exhibits a proton conductivity of up to 6.64 × 10^-2 S cm^-1 at 353 K and 98% relative humidity (RH). This value is almost 2 orders of magnitude higher than the corresponding value for its -SO₃H-free analogue, PP-Ph, which is 1.72 × 10^-4 S cm^-1 when measured under the same condition. Consequently, matrix-mixed membranes (labeled PP-PhSO₃H-PAN) were further prepared by mixing PP-PhSO₃H with polyacrylonitrile (PAN) in different ratios to test its potential application in the proton-exchange membrane (PEM) fuel cell. The analysis results indicate that when the weight ratio of PP-PhSO₃H/PAN is 3:1 [named PP-PhSO₃H-PAN (3:1)], its proton conductivity can reach up to 5.05 × 10^-2 S cm^-1 at 353 K and 98% RH, which is even comparable with those of proton-conductive electrolytes currently used in PEM fuel cells. Furthermore, the continuous test demonstrates that the PP-PhSO₃H-PAN (3:1) has long-life reusability. This research reveals that by using phosphazene and sulfonated multiple-amine modules as precursors, organic polymers with excellent proton conductivity for the assembly of matrix-mixed membranes in PEM fuel cells can be easily synthesized by a simple polymeric process.

Charged Nanochannels in Covalent Organic Framework Membranes Enabling Efficient Ion Exclusion

Controllable ion transport through nanochannels is crucial for biological and artificial membrane systems. Covalent organic frameworks (COFs) with regular and tunable nanochannels are emerging as an ideal material platform to develop synthetic membranes for ion transport. However, ion exclusion by COF membranes remains challenging because most COF materials have large-sized nanochannels leading to nonselective transport of small ions. Here we develop ionic COF membranes (iCOFMs) to control ion transport through charged framework nanochannels, the interior surfaces of which are covered with arrayed sulfonate groups to render superior charge density. The overlap of an electrical double layer in charged nanochannels blocks the entry of co-ions, narrows their passageways, and concomitantly restrains the permeation of counterions via the charge balance. These highly charged large-sized nanochannels within the iCOFM enable ion exclusion while maintaining intrinsically high water permeability. Our results reveal possibilities for controllable ion transport based on COF membranes for water purification, ionic separation, sensing, and energy conversion.

Facile construction of a highly proton-conductive matrix-mixed membrane based on a -SO3H functionalized polyamide

Developing a facile strategy to construct low-cost and efficient proton-conductive electrolytes is pivotal in the practical application of proton exchange membrane (PEM) fuel cells. Herein, a polyamide with in-built -SO₃H moieties, PA(PhSO3H)2, was synthesized via a simple one-pot polymeric acylation process. Investigations via electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA(PhSO3H)2 displays a proton conductivity of up to 5.54 × 10^-2 S cm^-1 at 353 K under 98% relative humidity (RH), which is more than 2 orders of magnitude higher than that of its -SO₃H-free analogue PA(Ph)2 (2.38 × 10^-4 S cm^-1) under the same conditions. Therefore, after mixing with polyacrylonitrile (PAN) at different ratios, PA(PhSO3H)2-based matrix-mixed membranes were subsequently made and the analysis results revealed that the proton conductivity can reach up to 5.82 × 10^-2 S cm^-1 at 353 K and 98% RH when the weight ratio of PA(PhSO3H)2 : PAN is in 3 : 1 (labeled as PA(PhSO3H)2-PAN(3 : 1)), the value of which is comparable even to those of commercially available electrolytes that are used in PEM fuel cells. In addition, continuous testing shows that PA(PhSO3H)2-PAN(3 : 1) possesses long-life reusability. This work demonstrates that, utilizing the simple reaction of polymeric acylation with a sulfonated module as a precursor, highly effective proton-conductive membranes for PEM fuel cells can be achieved in a facile manner.

Dispersive 2D Triptycene-Based Crystalline Polymers: Influence of Regioisomerism on Crystallinity and Morphology

The merging of good crystallinity and high dispersibility into two-dimensional (2D) layered crystalline polymers (CPs) still represents a challenge because a high crystallinity is often accompanied by intimate interlayer interactions that are detrimental to the material processibility. We herein report a strategy to address this dilemma using rationally designed three-dimensional (3D) monomers and regioisomerism-based morphology control. The as-synthesized CPs possess layered 2D structures, where the assembly of layers is stabilized by relatively weak van der Waals interactions between C-H bonds other than the usual π-π stackings. The morphology and dispersibility of the CPs are finely tuned via regioisomerism. These findings shed light on how to modulate the crystallinity, morphology, and ultimate function of crystalline polymers using the spatial arrangements of linking groups.

Giant Osmotic Energy Conversion through Vertical-Aligned Ion-Permselective Nanochannels in Covalent Organic Framework Membranes

Nanofluidic membranes have been demonstrated as promising candidates for osmotic energy harvesting. However, it remains a long-standing challenge to fabricate high-efficiency ion-permselective membranes with well-defined channel architectures. Here, we demonstrate high-performance osmotic energy conversion membranes based on oriented two-dimensional covalent organic frameworks (COFs) with ultrashort vertically aligned nanofluidic channels that enabled efficient and selective ion transport. Experiments combined with molecular dynamics simulations revealed that exquisite control over channel orientation, charge polarity, and charge density contributed to high ion selectivity and permeability. When applied to osmotic energy conversion, a pair of 100 nm thick oppositely charged COF membranes achieved an ultrahigh output power density of 43.2 W m^-2 at a 50-fold salinity gradient and up to 228.9 W m^-2 for the Dead Sea and river water system. The achieved power density outperforms the state-of-the-art nanofluidic membranes, suggesting the great potential of oriented COF membranes in the fields of advanced membrane technology and energy conversion.

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide

Developing a low-cost and effective proton-conductive electrolyte to meet the requirements of the large-scale manufacturing of proton exchange membrane (PEM) fuel cells is of great significance in progressing towards the upcoming “hydrogen economy” society. Herein, utilizing the one-pot acylation polymeric combination of acyl chloride and amine precursors, a polyamide with in-built -SO₃H moieties (PA-PhSO₃H) was facilely synthesized. Characterization shows that it possesses a porous feature and a high stability at the practical operating conditions of PEM fuel cells. Investigations of electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA-PhSO₃H displays a proton conductivity of up to 8.85 × 10⁻² S·cm⁻¹ at 353 K under 98% relative humidity (RH), which is more than two orders of magnitude higher than that of its -SO₃H-free analogue, PA-Ph (6.30 × 10⁻⁴ S·cm⁻¹), under the same conditions. Therefore, matrix-mixed membranes were fabricated by mixing with polyacrylonitrile (PAN) in different ratios, and the EIS analyses revealed that its proton conductivity can reach up to 4.90 × 10⁻² S·cm⁻¹ at 353 K and a 98% relative humidity (RH) when the weight ratio of PA-PhSO₃H:PAN is 3:1 (labeled as PA-PhSO₃H-PAN (3:1)), the value of which is even comparable with those of commercial-available electrolytes being used in PEM fuel cells. Additionally, continuous tests showed that PA-PhSO₃H-PAN (3:1) possesses a long-life reusability. This work demonstrates, using the simple acylation reaction with the sulfonated module as precursor, that low-cost and highly effective proton-conductive electrolytes for PEM fuel cells can be facilely achieved.

Asymmetric Hydrophosphonylation of Imines to Construct Highly Stable Covalent Organic Frameworks with Efficient Intrinsic Proton Conductivity

Imine-linked covalent organic frameworks (COFs) have received widespread attention because of their structure features such as high crystallinity and tunable pores. However, the intrinsic reversibility of the imine bond leads to the poor stability of imine-linked COFs under strong acid conditions. Also, their thermal stability is significantly lower than that of many other COFs. Herein, we report for the first time that the reversible imine bonds in the skeleton of COFs can be locked through the asymmetric hydrophosphonylation reaction of phosphite. The functionalized COFs not only retain the crystallinity and porous structure but also exhibit evidently improved chemical and thermal stabilities. In addition, the phosphorous acid groups generated by acidic hydrolysis attached to the skeleton endow the COFs with good intrinsic proton conductivity. Due to the diversity of phosphite derivatives and imine-linked COFs, this work may provide an avenue for extending the COF structures and functions through the asymmetric hydrophosphonylation reaction.

In Situ Growth of COF on PAN Nanofibers to Improve Proton Conductivity and Dimensional Stability in Proton Exchange Membranes

Perfluorosulfonic acid (PFSA) polymer is considered as a proton exchange membrane material with great potential. Nevertheless, excessive water absorption caused by abundant sulfonic acid groups makes PFSA have low dimensional stabilities. In order to improve the dimensional stability of PFSA membranes, nanofibers are introduced into PFSA membranes. However, because nanofibers lack proton conducting groups, it usually reduces the proton conductivities of PFSA membranes. It is a challenge to improve dimensional stabilities while maintaining high proton conductivities. Due to the structural designability, covalent organic frameworks (COFs) with proton conductive groups are chosen to improve the overall performance of PFSA membranes. Herein, COFs synthesized in situ on three-dimensional PAN nanofibers were introduced into PFSA to prepare PFSA@PAN/TpPa-SO3H sandwiched membranes. The PFSA@PAN/TpPa-SO3H-5 composite membrane exhibited outstanding proton conductivity, which reached 260.81 mS·cm−1 at 80 °C and 100% RH, and only decreased by 4.7% in 264 h. The power density of a single fuel cell with PFSA@PAN/TpPa-SO3H-5 was as high as 392.7 mW·cm−2. Compared with the pristine PFSA membrane, the conductivity of PFSA@PAN/TpPa-SO3H-5 increased by 70.0 mS·cm−1, and the area swelling ratio decreased by 8.1%. Our work provides a novel strategy to prepare continuous proton transport channels to simultaneously improve conductivities and dimensional stabilities of proton exchange membranes.

Ultrathin Membranes for Separations: A New Era Driven by Advanced Nanotechnology

Ultrathin membranes are at the forefront of membrane research, offering great opportunities in revolutionizing separations with ultrafast transport. Driven by advanced nanomaterials and manufacturing technology, tremendous progresses are made over the last 15 years in the fabrications and applications of sub-50 nm membranes. Here, an overview of state-of-the-art ultrathin membranes is first introduced, followed by a summary of the fabrication techniques with an emphasis on how to realize such extremely low thickness. Then, different types of ultrathin membranes, categorized based on their structures, that is, network, laminar, or framework structures, are discussed with a focus on the interplays among structure, fabrication methods, and separation performances. Recent research and development trends are highlighted. Meanwhile, the performances and applications of current ultrathin membranes for representative separations (gas separation and liquid separation) are thoroughly analyzed and compared. Last, the challenges in material design, structure construction, and coordination are given, in order to fully realize the potential of ultrathin membranes and facilitate the translation from scientific achievements to industrial productions.

Covalent Organic Frameworks with Record Pore Apertures

The pore apertures dictate the guest accessibilities of the pores, imparting diverse functions to porous materials. It is highly desired to construct crystalline porous polymers with predesignable and uniform mesopores that can allow large organic, inorganic, and biological molecules to enter. However, due to the ease of the formation of interpenetrated and/or fragile structures, the largest pore aperture reported in the metal-organic frameworks is 8.5 nm, and the value for covalent organic frameworks (COFs) is only 5.8 nm. Herein, we construct a series of COFs with record pore aperture values from 7.7 to 10.0 nm by designing building blocks with large conformational rigidness, planarity, and suitable local polarity. All of the obtained COFs possess eclipsed stacking structures, high crystallinity, permanent porosity, and high stability. As a proof of concept, we successfully employed these COFs to separate pepsin that is ∼7 nm in size from its crudes and to protect tyrosinase from heat-induced deactivation.

2D Polymer Nanosheets for Membrane Separation

Since the discovery of single-layer graphene in 2004, the family of 2D inorganic nanosheets is considered as ideal membrane materials due to their ultrathin atomic thickness and fascinating physicochemical properties. However, the intrinsically nonporous feature of 2D inorganic nanosheets hinders their potential to achieve a higher flux to some extent. Recently, 2D polymer nanosheets, originated from the regular and periodic covalent connection of the building units in 2D plane, have emerged as promising candidates for preparing ultrafast and highly selective membranes owing to their inherently tunable and ordered pore structure, light weight, and high specific surface. In this review, the synthetic methodologies (including top-down and bottom-up methods) of 2D polymer nanosheets are first introduced, followed by the summary of 2D polymer nanosheets-based membrane fabrication as well as membrane applications in the fields of gas separation, water purification, organic solvent separation, and ion exchange/transport in fuel cells and lithium-sulfur batteries. Finally, based on their current achievements, the authors' personal insights are put forward into the existing challenges and future research directions of 2D polymer nanosheets for membrane separation. The authors believe this comprehensive review on 2D polymer nanosheets-based membrane separation will definitely inspire more studies in this field.

Ultralarge Free-Standing Imine-Based Covalent Organic Framework Membranes Fabricated via Compression

Demand continues for processing methods to shape covalent organic frameworks (COFs) into macroscopic objects that are needed for their practical applications. Herein, a simple compression method to prepare large-scale, free-standing homogeneous and porous imine-based COF-membranes with dimensions in the centimeter range and excellent mechanical properties is reported. This method entails the compression of imine-based COF-aerogels, which undergo a morphological change from an elastic to plastic material. The COF-membranes fabricated upon compression show good performances for the separation of gas mixtures of industrial interest, N₂ /CO₂ and CH₄ /CO₂ . It is believed that the new procedure paves the way to a broader range of COF-membranes.

Assembling covalent organic framework membranes with superior ion exchange capacity

Ionic covalent organic framework membranes (iCOFMs) hold great promise in ion conduction-relevant applications because the high content and monodispersed ionic groups could afford superior ion conduction. The key to push the upper limit of ion conductivity is to maximize the ion exchange capacity (IEC). Here, we explore iCOFMs with a superhigh ion exchange capacity of 4.6 mmol g⁻¹, using a dual-activation interfacial polymerization strategy. Fukui function is employed as a descriptor of monomer reactivity. We use Brønsted acid to activate aldehyde monomers in organic phase and Brønsted base to activate ionic amine monomers in water phase. After the dual-activation, the reaction between aldehyde monomer and amine monomer at the water-organic interface is significantly accelerated, leading to iCOFMs with high crystallinity. The resultant iCOFMs display a prominent proton conductivity up to 0.66 S cm⁻¹, holding great promise in ion transport and ionic separation applications.

Covalent organic framework-based membranes are highly tunable materials with potential use in a variety of applications. Here the authors report a dual-activation interfacial polymerization strategy to prepare ionic covalent organic framework membranes with high ion exchange capacity.

One-pot self-assembly synthesis of H3+xPMo12−xVxO40@[Cu6O(TZI)3(H2O)9(NO3)n]·(H2O)15 for enhanced proton conduction materials

One-pot self-assembly encapsulation of PMoVx in rht-MOF-1 affords enhanced the proton conduction material PMoVx@rht-MOF-1.

A Visible Light/Heat Responsive Covalent Organic Framework for Highly Efficient and Switchable Proton Conductivity

In recent years, covalent organic frameworks (COFs) have attracted enormous interest as a new generation of proton-exchange membranes, chemical sensors and electronic devices. However, to design high proton conductivity COFs,...

Porous polyelectrolyte frameworks: synthesis, post-ionization and advanced applications

Porous organic polymers (POPs), which feature high surface areas, robust skeletons, tunable pores, adjustable functionality and versatile applicability, have constituted a designable platform to develop advanced organic materials. Endowing polyelectrolytes with the distinct characteristics of POPs will attract mounting interest as the structural diversity of polyelectrolytes will bring the new hope of intriguing applications and potential benefits. In this review, the striking progress in ionized POPs (i-POPs) has been systematically summarized with regard to their synthetic strategies and applications. In the synthesis of i-POPs, we illustrate the representative ionic building blocks and charged functional groups capable of constructing the polyelectrolyte frameworks. The synthetic methods, including direct synthesis and post-modification, are detailed for the i-POPs with amorphous or crystalline structures, respectively. Subsequently, we outline the distinctive performances of i-POPs in adsorption, separation, catalysis, sensing, ion conduction and biomedical applications. The survey concerns the interplay between the surface chemistry, ionic interaction and pore confinement that cooperatively promote the performance of i-POPs. Finally, we conclude with the remaining challenges and promising opportunities for the on-going development of i-POPs.

Hybrid Nafion Membranes of Ionic Hydrogen-Bonded Organic Framework Materials for Proton Conduction and PEMFC Applications

As the high-power density and environmentally friendly energy resources, proton exchange membrane fuel cells (PEMFCs) have a promising future in portable power generation. Herein, the hybrid Nafion membranes of ionic hydrogen-bonded organic frameworks (iHOFs) for PEMFC applications are demonstrated. By adjusting the position of sulfonic groups on naphthalene disulfonic acid compounds, four iHOFs with different types of hydrogen bonds were synthesized successfully based on 1,1'-diamino-4,4'-bipyridylium and naphthalene disulfonic acid. The formation of hydrogen bond interactions between amino and sulfonate groups provides a rich hydrogen bond network, which makes such iHOFs have high conductivity, and the maximum value is 2.76 × 10^-3 S·cm^-1 at 100 °C and 98% RH. Besides, composite membrane materials were obtained by mixing Nafion and iHOFs, and the maximum proton conductivity values can achieve 1.13 × 10^-2 S·cm^-1 for 6%-iHOF-3/Nafion and 2.87 × 10^-3 S·cm^-1 for 6%-iHOF-4/Nafion membranes at 100 °C under 98% RH. Through the H₂/O₂ fuel cell performance test by using iHOF/Nafion as the solid electrolyte, the maximum power and current density values of hybrid membranes are 0.36 W·cm^-2 and 1.10 A·cm^-2 for 6%-iHOF-3/Nafion and 0.42 W·cm^-2 and 1.20 A·cm^-2 for 6%-iHOF-4/Nafion at 80 °C and 100% RH. This work provides a practicable approach for establishing high-performance proton exchange hybrid membranes by doping high proton-conducting iHOFs into the Nafion matrix.

Ionic Covalent Organic Frameworks for Energy Devices

Covalent organic frameworks (COFs) are a class of porous crystalline materials whose facile preparation, functionality, and modularity have led to their becoming powerful platforms for the development of molecular devices in many fields of (bio)engineering, such as energy storage, environmental remediation, drug delivery, and catalysis. In particular, ionic COFs (iCOFs) are highly useful for constructing energy devices, as their ionic functional groups can transport ions efficiently, and the nonlabile and highly ordered all-covalent pore structures of their backbones provide ideal pathways for long-term ionic transport under harsh electrochemical conditions. Here, current research progress on the use of iCOFs for energy devices, specifically lithium-based batteries and fuel cells, is reviewed in terms of iCOF backbone-design strategies, synthetic approaches, properties, engineering techniques, and applications. iCOFs are categorized as anionic COFs or cationic COFs, and how each of these types of iCOFs transport lithium ions, protons, or hydroxides is illustrated. Finally, the current challenges to and future opportunities for the utilization of iCOFs in energy devices are described. This review will therefore serve as a useful reference on state-of-the-art iCOF design and application strategies focusing on energy devices.

Oriented Two-Dimensional Covalent Organic Framework Membranes with High Ion Flux and Smart Gating Nanofluidic Transport

Nanofluidic ion transport holds high promise in bio-sensing and energy conversion applications. However, smart nanofluidic devices with high ion flux and modulable ion transport capabilities remain to be realised. Herein, we demonstrate smart nanofluidic devices based on oriented two-dimensional covalent organic framework (2D COF) membranes with vertically aligned nanochannel arrays that achieved a 2-3 orders of magnitude higher ion flux compared with that of conventional single-channel nanofluidic devices. The surface-charge-governed ion conductance is dominant for electrolyte concentration up to 0.01 M. Moreover, owing to the customisable pH-responsivity of imine and phenol hydroxyl groups, the COF-DT membranes attained an actively modulable ion transport with a high pH-gating on/off ratio of ≈100. The customisable structure and rich chemistry of COF materials will offer a promising platform for manufacturing nanofluidic devices with modifiable ion/molecular transport features.

Three-dimensional covalent organic frameworks based on a π-conjugated tetrahedral node

The construction of three-dimensional (3D) covalent organic frameworks (COFs), especially fully conjugated 3D COFs, is a long-standing challenge. Herein, we report a saddle-like, π-conjugated cyclooctatetrathiophene (COTh) as a tetrahedral node to construct fully conjugated 3D COFs. The present work enriches the structural diversities and potential applications of 3D COFs.

Oil-Water-Oil Triphase Synthesis of Ionic Covalent Organic Framework Nanosheets

Ionic covalent organic framework nanosheets (iCOFNs) with long-range ordered and mono-dispersed ionic groups hold great potential in many advanced applications. Considering the inherent drawbacks of oil-water biphase method, herein, we explore an oil-water-oil triphase method based on phase engineering strategy for the bottom-up synthesis of iCOFNs. The middle water phase serves as a confined reaction region, and the two oil phases are reservoirs for storing and supplying monomers to the water phase. A large aqueous space and low monomer concentration lead to the anisotropic gradual growth of iCOFNs into few-layer thickness, large lateral size, and high crystallinity. Notably, the resulting three cationic and anionic iCOFNs exhibit ultra-high aspect ratios of up to 20,000. We further demonstrate their application potential by processing into ultrathin defect-free COF membranes for efficient biogas separation. Our triphase method may offer an alternative platform technology for the synthesis and innovative applications of iCOFNs.