Kinetic Control of Metal-Organic Framework Crystallization Investigated by Time-Resolved In Situ X-Ray Scattering

Synthesis of MOFs: a personal view on rationalisation, application and exploration

This perspective highlights some studies and insights in the synthesis of metal-organic frameworks (MOFs) in a brief and comprehensive manner. The understanding of the synthesis procedures investigated by in and ex situ methods is of special interest since knowledge on the nucleation and crystallisation mechanism will ideally lead to an improved control over product formation. The prospective developments associated with the manufacturing of such materials (or devices consisting thereof) are discussed as well. A major challenge is the adjustment of the synthesis conditions to yield quantities suitable for real life applications. Last but not least, vast opportunities are yet to be explored involving the synthesis of both known and novel compounds. Thus the crucial points involving the synthesis of MOFs summarized in this perspective are rationalisation, application and exploration. For each subtopic we have also attempted to anticipate future challenges and developments.

Comment on “Insight into the reversible structural crystalline-state transformation from MIL-53(Al) to MIL-68(Al)” by A. Perea-Cachero, E. Romero, C. Téllez and J. Coronas, CrystEngComm, 2018, 20, 402

The inadvertently published phase transformation from MIL-53 to MIL-68 is merely a deformation of the MIL-53 structure upon DMF adsorption.

Retracted Article: Insight into the reversible structural crystalline-state transformation from MIL-53(Al) to MIL-68(Al)

The reversible crystalline transformation from MIL-53(Al) into MIL-68(Al) was accomplished.

Unprecedented NH2-MIL-101(Al)/n-Bu4NBr system as solvent-free heterogeneous catalyst for efficient synthesis of cyclic carbonates via CO2 cycloaddition

NH₂-MIL-101(Al)/n-Bu₄NBr is an excellent solvent-free catalyst for CO₂ cycloaddition to epoxides that highlights the benefits of micro–mesoporous system containing both acidic and basic functionalities.

Kinetic-Controlled Formation of Bimetallic Metal-Organic Framework Hybrid Structures

Heterometallic metal-organic frameworks (MOFs) are constructed from two or more kinds of metal ions, while still remaining their original topologies. Due to distinct reaction kinetics during MOF formation, partial distribution of different metals within a single MOF crystal can lead to sophisticated heterogeneous nanostructures. Here, this study reports an investigation of reaction kinetics for different metal ions in a bimetallic MOF system, the ZIF-8/67 (M(2-mIM)₂ , M = Zn for ZIF-8, and Co for ZIF-67, 2-mIM = 2-methylimidazole), by in situ optical method. Distinct kinetics of the two metals forming single-component MOFs are revealed, and when both Co and Zn ions are present in the starting solution, homogeneous distributions of the two metals are only achieved at high Co/Zn ratio, while at low Co/Zn ratio concentration gradient from Co-rich cores to Zn-rich shells is observed. Further, by adding the two metals in sequence, more sophisticated structures are achieved. Specifically, when Co²⁺ is added first, ZIF-67@ZIF-8/67 core-shell nanocrystals are achieved with tunable core/shell thickness ratio depending on the time intervals; while when Zn²⁺ is added first, only agglomerates of irregular shape form due to the weak nucleation ability of Zn²⁺ .

Adsorption and Reactive Desorption on Metal-Organic Frameworks: A Direct Strategy for Lactic Acid Recovery

Biomass-derived lactic acid (LA) is an important platform chemical towards the sustainable production of numerous materials. However, the fermentation process currently in use is limited by the difficult recovery of the LA product from the fermentation broth and results in the generation of stoichiometric amounts of gypsum waste. Herein, we show that metal-organic frameworks (MOFs) of the UiO-66(Zr) type are effective adsorbents for the separation of LA from aqueous (buffer) solutions. These frameworks based on zirconium clusters and terephthalic acid derivatives display a tremendous uptake (up to 42 wt %) and a high affinity for LA. The latter can further be tuned by changing the hydrogen-bonding properties of the functional groups present on the organic ligand. A Rietveld refinement disclosed the specific interaction of LA with the clusters of UiO-66(Zr) and a preferential adsorption on open zirconium sites. Taking advantage of the catalytic activity of UiO-66(Zr), desorption of LA was performed in alcohols to recover up to 73 % as ester. Applied to the recovery of LA, adsorption and reactive desorption offer a direct and gypsum-free strategy as an alternative for the current multi-step process.

Study of synthesis parameters of MIL-53(Al) using experimental design methodology for CO2/CH4 separation

In this study hydrothermal method was used to synthesize MIL-53(Al) (MIL stands for Materials Institute of Lavoisier). Plackett–Burman (P–B) as an experimental design method was applied to investigate the effect of synthesis and activation conditions on specific surface area, relative crystallinity, and production yield of MIL-53(Al) synthesis. Some parameters such as ligand-to-metal molar ratio, synthesis time, synthesis temperature, calcination temperature, and calcination time were selected as the variables. The Brunauer–Emmett–Teller (BET) technique was used in order to estimate the specific surface area of samples while the relative crystallinity of the samples was estimated by comparing their X-Ray Diffraction (XRD) pattern. The morphology of the samples was investigated by field emission scanning electron microscopy. The yield of final products was determined based on organic ligands. The results revealed the significant effect of synthesis temperature on BET surface area, particle size, yield, and crystallinity. The calcination temperature has significant positive effect on BET and crystallinity. Also, the negative significant effect of molar ratio on yield was concluded from the results. However, negligible effect of synthesis and calcination time on the properties of prepared materials were observed. Furthermore, separation capability of a selected sample for carbon dioxide (CO2) and methane (CH4) was measured. Pure gas adsorption data were successfully fitted to Langmuir, Sips, and Toth models. The selected sample provided high adsorption capacity for both gases. The binary adsorption of gases was also investigated based on extended Langmuir equations and the ideal adsorbed solution theory (IAST) models. Comparing the experimental and models data indicated good agreement between the IAST model and experiments. Finally, high CO2/CH4 selectivity of 7.6 was obtained experimentally for the CO2/CH4 molar ratio of 0.2/0.8.

Combined in- and ex situ studies of pyrazine adsorption into the aliphatic MOF Al-CAU-13: structures, dynamics and correlations

The intercalation of different pyrazine derivatives into the trans-1,4-cyclohexanedicarboxylate (CDC²⁻) based Al-MOF [Al(OH)(CDC)], denoted as CAU-13, was investigated ex- and in-situ.

Mechanochemical Immobilisation of Metathesis Catalysts in a Metal-Organic Framework

A simple, one-step mechanochemical procedure for immobilisation of homogeneous metathesis catalysts in metal-organic frameworks was developed. Grinding MIL-101-NH₂ (Al) with a Hoveyda-Grubbs second-generation catalyst resulted in a heterogeneous catalyst that is active for metathesis and one of the most stable immobilised metathesis catalysts. During the mechanochemical immobilisation the MIL-101-NH₂ (Al) structure was partially converted to MIL-53-NH₂ (Al). The Hoveyda-Grubbs catalyst entrapped in MIL-101-NH₂ (Al) is responsible for the observed catalytic activity. The developed synthetic procedure was also successful for the immobilisation of a Zhan catalyst.

Evidence for a chemical clock in oscillatory formation of UiO-66

Chemical clocks are often used as exciting classroom experiments, where an induction time is followed by rapidly changing colours that expose oscillating concentration patterns. This type of reaction belongs to a class of nonlinear chemical kinetics also linked to chaos, wave propagation and Turing patterns. Despite its vastness in occurrence and applicability, the clock reaction is only well understood for liquid-state processes. Here we report a chemical clock reaction, in which a solidifying entity, metal–organic framework UiO-66, displays oscillations in crystal dimension and number, as shown by X-ray scattering. In rationalizing this result, we introduce a computational approach, the metal–organic molecular orbital methodology, to pinpoint interaction between the tectonic building blocks that construct the metal–organic framework material. In this way, we show that hydrochloric acid plays the role of autocatalyst, bridging separate processes of condensation and crystallization.

Reactions with non-linear kinetics, such as chemical clocks, are reasonably common but only well understood in the liquid phase. Here, the authors report and rationalize a chemical clock reaction taking place in a solidifying metal-organic framework.

Adsorption behavior of magnetic amino-functionalized metal–organic framework for cationic and anionic dyes from aqueous solution

The mechanisms of interactions such as electrostatic interaction, hydrogen bonding, and π–π stacking interaction were discussed for the adsorption of cationic and anionic dyes onto magnetic NH₂-MIL-101(Al).

Mixed-metal or mixed-linker metal organic frameworks as heterogeneous catalysts

This review illustrates the recent developments in heterogeneous catalysis using mixed metal or mixed linker MOFs.

Metal-Organic Frameworks in Adsorption-Driven Heat Pumps: The Potential of Alcohols as Working Fluids

A large fraction of global energy is consumed for heating and cooling. Adsorption-driven heat pumps and chillers could be employed to reduce this consumption. MOFs are often considered to be ideal adsorbents for heat pumps and chillers. While most published works to date on this topic have focused on the use of water as a working fluid, the instability of many MOFs to water and the fact that water cannot be used at subzero temperatures pose certain drawbacks. The potential of using alcohol-MOF pairs in adsorption-driven heat pumps and chillers is investigated. To this end, 18 different selected MOF structures in combination with either methanol or ethanol as a working fluid are considered, and their potential is assessed on the basis of adsorption measurements and thermodynamic efficiencies. If alcohols are used instead of water, then (1) adsorption occurs at lower relative pressures for methanol and even lower pressure for ethanol, (2) larger pores can be utilized efficiently, as hysteresis is absent for pores smaller than 3.4 nm (2 nm for water), (3) larger pore sizes need to be employed to ensure the desired stepwise adsorption, (4) the effect of (polar/apolar) functional groups in the MOF is far less pronounced, (5) the energy released or taken up per cycle is lower, but heat and mass transfer may be enhanced, (6) stability of MOFs seems to be less of an issue, and (7) cryogenic applications (e.g., ice making) become feasible. From a thermodynamic perspective, UiO-67, CAU-3, and ZIF-8 seem to be the most promising MOFs for both methanol and ethanol as working fluids. Although UiO-67 might not be completely stable, both CAU-3 and ZIF-8 have the potential to be applied, especially in subzero-temperature adsorption chillers (AC).

Adsorption on Mesoporous Metal-Organic Frameworks in Solution: Aromatic and Heterocyclic Compounds

Adsorption and desorption play major roles in separations, purification of water, waste streams, liquid fuels, catalysis, biomedicine and chromatography. Mesoporous metal-organic frameworks (MOFs) with pore sizes 2-50 nm are particularly suitable for adsorption of organic compounds in solution. Tens of thousands of aromatic and heterocyclic compounds are major components of liquid fuels, feedstock for industrial synthesis, solvents, dyestuffs, agricultural chemicals, medicinal drugs, food additives, and so forth. This Review provides a systematization and analysis of studies on adsorption/desorption on mesoporous MOFs in solution and their underlying chemical mechanisms. The (in)stability of mesoporous MOFs in water is critically discussed. Adsorption capacity and selectivity are covered for organic dyes, medicinal drugs, major components of liquid fuels, and miscellaneous industrial chemicals. Ionic interactions, Brønsted acid-base interactions, hydrogen bonding, coordination bonding, π-π interactions, and non-specific interactions are covered amongst adsorption mechanisms. The effects of post-synthetic modifications of mesoporous MOFs on their stability, adsorption capacity, selectivity, and mechanisms of adsorption and desorption are analyzed. To encourage research in this quickly growing field, we identify "niches" for which no application-oriented and/or mechanistic studies were reported. Perspectives and limitations of a wide use of mesoporous MOFs as industrial sorbents are discussed.

Impact of the Nature of the Organic Spacer on the Crystallization Kinetics of UiO-66(Zr)-Type MOFs

The influence of the constitutive dicarboxylate linkers (size, functional group) over the crystallization kinetics of a series of porous Zr metal-organic frameworks with the UiO-66 topology has been investigated by in situ time-resolved energy dispersive X-ray diffraction (EDXRD). Both large aromatic spacers (2,6-naphthalene-, 4,4'-biphenyl- and 3,3'-dichloro-4,4'-azobenzene-dicarboxylates) and a series of X-functionalized terephthalates (X=NH2 , NO2 , Br, CH3 ) were investigated in dimethylformamide (DMF) at different temperatures and compared with the parent UiO-66. Using different crystallization models, rate constants and further kinetic parameters (such as activation energy) have been extracted. Finally, the impact of the replacement of the toxic DMF by water on the crystallization kinetics was studied through the synthesis of the functionalized UiO-66-NO2 solid.

Metal organic framework synthesis in the presence of surfactants: towards hierarchical MOFs?

The effect of synthesis pH and H₂O/EtOH molar ratio on the textural properties of different aluminium trimesate metal organic frameworks (MOFs) prepared in the presence of the well-known cationic surfactant cetyltrimethylammonium bromide (CTAB) at 120 °C was studied with the purpose of obtaining a MOF with hierarchical pore structure. Depending on the pH and the solvent used, different topologies were obtained (namely, MIL-96, MIL-100 and MIL-110). On the one hand, MIL-110 was obtained at lower temperatures than those commonly reported in the literature and without additives to control the pH; on the other hand, MIL-100 with crystallite sizes as small as 30 ± 10 nm could be easily synthesized in a mixture of H₂O and EtOH with a H₂O/EtOH molar ratio of 3.4 at pH 2.6 in the presence of CTAB. The resulting material displays a hierarchical porosity that combines the microporosity from the MOF and the non-ordered mesopores defined in between the MOF nanoparticles. Interestingly, the maximum of the pore size distribution could be varied between 3 and 33 nm. Finally, at pH 2.5 and using water as a solvent, platelets of MIL-96, a morphology never observed before for this MOF, were synthesized with a (001) preferential crystal orientation, the (001) plane running parallel to the bipyramidal cages of the MIL-96 topology.

Sailing into uncharted waters: recent advances in the in situ monitoring of catalytic processes in aqueous environments

This review presents recent advances inin situstudies of catalytic processes in the aqueous environment with an outlook of mesoscale imaging.

In situ studies of solvothermal synthesis of energy materials

Solvothermal and hydrothermal synthesis, that is, synthesis taking place in a solvent at elevated temperature and pressure, is a powerful technique for the production of advanced energy materials as it is versatile, cheap, and environmentally friendly. However, the fundamental reaction mechanisms dictating particle formation and growth under solvothermal conditions are not well understood. In order to produce tailor-made materials with specific properties for advanced energy technologies, it is essential to obtain an improved understanding of these processes and, in this context, in situ studies are an important tool as they provide real time information on the reactions taking place. Here, we present a review of the use of powder diffraction and total scattering methods for in situ studies of synthesis taking place under solvothermal and hydrothermal conditions. The experimental setups used for in situ X-ray and neutron studies are presented, and methods of data analysis are described. Special attention is given to the methods used to extract structural information from the data, for example, Rietveld refinement, whole powder pattern modelling and pair distribution function analysis. Examples of in situ studies are presented to illustrate the types of chemical insight that can be obtained.

A Review on Breathing Behaviors of Metal-Organic-Frameworks (MOFs) for Gas Adsorption

Metal-organic frameworks (MOFs) are a new class of microporous materials that possess framework flexibility, large surface areas, "tailor-made" framework functionalities, and tunable pore sizes. These features empower MOFs superior performances and broader application spectra than those of zeolites and phosphine-based molecular sieves. In parallel with designing new structures and new chemistry of MOFs, the observation of unique breathing behaviors upon adsorption of gases or solvents stimulates their potential applications as host materials in gas storage for renewable energy. This has attracted intense research energy to understand the causes at the atomic level, using in situ X-ray diffraction, calorimetry, Fourier transform infrared spectroscopy, and molecular dynamics simulations. This article is developed in the following order: first to introduce the definition of MOFs and the observation of their framework flexibility. Second, synthesis routes of MOFs are summarized with the emphasis on the hydrothermal synthesis, owing to the environmental-benign and economically availability of water. Third, MOFs exhibiting breathing behaviors are summarized, followed by rationales from thermodynamic viewpoint. Subsequently, effects of various functionalities on breathing behaviors are appraised, including using post-synthetic modification routes. Finally, possible framework spatial requirements of MOFs for yielding breathing behaviors are highlighted as the design strategies for new syntheses.

Molecular promoting of aluminum metal-organic framework topology MIL-101 by N,N-dimethylformamide

In situ NMR and DFT modeling demonstrate that N,N-dimethylformamide (DMF) promotes the formation of metal-organic framework NH2-MIL-101(Al). In situ NMR studies show that upon dissociation of an aluminum-coordinated aqua ligand in NH2-MOF-235(Al), DMF forms a H-Cl-DMF complex during synthesis. This reaction induces a transformation from the MOF-235 topology into the MIL-101 topology. Electronic structure density functional theory (DFT) calculations show that the use of DMF instead of water as the synthesis solvent decreases the energy gap between the kinetically favored MIL-101 and thermodynamically favored MIL-53 products. DMF therefore promotes MIL-101 topology both kinetically and thermodynamically.

High valence 3p and transition metal based MOFs

This article focuses on high valence 3p and transition metal based metal organic frameworks.

A tetrazole-based fluorescence “turn-on” sensor for Al(iii) and Zn(ii) ions and its application in bioimaging

A dual fluorescent chemosensor for Al³⁺and Zn²⁺ions based on inhibition of ESIPT can be applied in bioimaging.