Genetically encoded cyclopropene directs rapid, photoclick-chemistry-mediated protein labeling in mammalian cells

Synthesis and evaluation of photo-activatable β-diarylsydnone-l-alanines for fluorogenic photo-click cyclization of peptides

β-Diarylsydnone-l-alanines were designed and introduced into peptides allowing photo-cyclization only in phosphate containing buffer with concomitant fluorescence generation in live cells.

Hydrophilic azaspiroalkenes as robust bioorthogonal reporters

Two hydrophilic spiroalkenes, azaspiro[2.3]hex-1-ene and azaspiro[2.4]hept-1-ene, were designed and synthesized. Compared to the previously reported spiro[2.3]hex-1-ene, the azaspiroalkenes exhibited greater water solubility and reactivity as dipolarophiles in the photoinduced tetrazole-alkene cycloaddition reaction. In addition, an azaspiro[2.3]hex-1-ene-containing amino acid, AsphK, was found to be charged by an engineered pyrrolysyl-tRNA synthetase into proteins via amber codon suppression in E. coli as well as in mammalian cells.

Lipidated cyclopropenes via a stable 3-N spirocyclopropene scaffold

Lipidated cyclopropenes serve as useful bioorthogonal reagents for imaging cell membranes due to the cyclopropene's small size and ability to ligate with pro-fluorescent tetrazines. Previously, the lipidation of cyclopropenes required modification at the C3 position because methods to append lipids at C1/C2 were not available. Herein, we describe C1/C2 lipidation with the biologically active lipid ceramide and a common phospholipid using a cyclopropene scaffold whose reactivity with 1,2,4,5-tetrazines has been caged.

Intrinsically Fluorescent, Stealth Polypyrazoline Nanoparticles with Large Stokes Shift for In Vivo Imaging

Recent advances in super-resolution microscopy and fluorescence bioimaging allow exploring previously inaccessible biological processes. To this end, there is a need for novel fluorescent probes with specific features in size, photophysical properties, colloidal and optical stabilities, as well as biocompatibility and ability to evade the reticuloendothelial system. Herein, novel fluorescent nanoparticles are introduced based on an inherently fluorescent polypyrazoline (PPy) core and a polyethylene glycol (PEG) shell, which address all aforementioned challenges. Synthesis of the PPy-PEG amphiphilic block copolymer by phototriggered step-growth polymerization is investigated by NMR spectroscopy, size-exclusion chromatography, and mass spectrometry. The corresponding nanoparticles are characterized for their luminescent properties and hydrodynamic size in various aqueous environments (e.g., cell culture media). PPy nanoparticles particularly exhibit a large Stokes shift (Δλ = 160 nm or Δν > 7000 cm^-1 ) with visible light excitation and strong colloidal stability. While clearance by macrophages and endothelial cells is minimal, PPy displays good biocompatibility. Finally, PPy nanoparticles prove to be long circulating when injected in zebrafish embryos, as observed by in vivo time-lapse fluorescence microscopy. In summary, PPy nanoparticles are highly promising to be further developed as fluorescent nanodelivery systems with low toxicity and exquisite retention in the blood stream.

A genetically encoded 19F NMR probe for lysine acetylation

Advances in acetylated protein-protein/DNA interactions depend on the development of a novel NMR (nuclear magnetic resonance) probe to study the conformational changes of acetylated proteins. However, the method for detecting the acetylated protein conformation is underdeveloped. Herein, an acetyllysine mimic has been exploited for detecting the conformational changes of acetylated p53-protein/DNA interactions by genetic code expansion and 19F NMR. This 19F NMR probe shows high structural similarity to acetyllysine and could not be deacetylated by sirtuin deacetylase in vitro/vivo. Moreover, acetylation of p53 K164 is reported to be deacetylated by SIRT2 for the first time.

Constructing New Bioorthogonal Reagents and Reactions

Chemical tools are transforming our understanding of biomolecules and living systems. Included in this group are bioorthogonal reagents-functional groups that are inert to most biological species, but can be selectively ligated with complementary probes, even in live cells and whole organisms. Applications of these tools have revealed fundamental new insights into biomolecule structure and function-information often beyond the reach of genetic approaches. In many cases, the knowledge gained from bioorthogonal probes has enabled new questions to be asked and innovative research to be pursued. Thus, the continued development and application of these tools promises to both refine our view of biological systems and facilitate new discoveries. Despite decades of achievements in bioorthogonal chemistry, limitations remain. Several reagents are too large or insufficiently stable for use in cellular environments. Many bioorthogonal groups also cross-react with one another, restricting them to singular tasks. In this Account, we describe our work to address some of the voids in the bioorthogonal toolbox. Our efforts to date have focused on small reagents with a high degree of tunability: cyclopropenes, triazines, and cyclopropenones. These motifs react selectively with complementary reagents, and their unique features are enabling new pursuits in biology. The Account is organized by common themes that emerged in our development of novel bioorthogonal reagents and reactions. First, natural product structures can serve as valuable starting points for probe design. Cyclopropene, triazine, and cyclopropenone motifs are all found in natural products, suggesting that they would be metabolically stable and compatible with a variety of living systems. Second, fine-tuning bioorthogonal reagents is essential for their successful translation to biological systems. Different applications demand different types of probes; thus, generating a collection of tools that span a continuum of reactivities and stabilities remains an important goal. We have used both computational analyses and mechanistic studies to guide the optimization of various cyclopropene and triazine probes. Along the way, we identified reagents that are chemoselective but best suited for in vitro work. Others are selective and robust enough for use in living organisms. The last section of this Account highlights the need for the continued pursuit of new reagents and reactions. Challenges exist when bioorthogonal chemistries must be used in concert, given that many exploit similar mechanisms and cannot be used simultaneously. Such limitations have precluded certain multicomponent labeling studies and other biological applications. We have relied on mechanistic and computational insights to identify mutually orthogonal sets of reactions, in addition to exploring unique genres of reactivity. The continued development of mechanistically distinct, biocompatible reactions will further diversify the bioorthogonal reaction portfolio for examining biomolecules.

Orthogonal Protein Translation Using Pyrrolysyl-tRNA Synthetases for Single- and Multiple-Noncanonical Amino Acid Mutagenesis

To date, the two systems most extensively used for noncanonical amino acid (ncAA) incorporation via orthogonal translation are based on the Methanococcus jannaschii TyrRS/tRNA _CUA^Tyr and the Methanosarcina barkeri/Methanosarcina mazei PylRS/tRNA _CUA^Pyl pairs. Here, we summarize the development and usage of the pyrrolysine-based system for orthogonal translation, a process that allows for the recombinant production of site-specifically labeled proteins and peptides. Via stop codon suppression in Escherichia coli and mammalian cells, genetically encoded biomolecules can be equipped with a great diversity of chemical functionalities including click chemistry handles, post-translational modifications, and photocaged sidechains.

Optimizing the Genetic Incorporation of Chemical Probes into GPCRs for Photo-crosslinking Mapping and Bioorthogonal Chemistry in Live Mammalian Cells

The genetic incorporation of non-canonical amino acids (ncAAs) via amber stop codon suppression is a powerful technique to install artificial probes and reactive moieties onto proteins directly in the live cell. Each ncAA is incorporated by a dedicated orthogonal suppressor-tRNA/amino-acyl-tRNA-synthetase (AARS) pair that is imported into the host organism. The incorporation efficiency of different ncAAs can greatly differ, and be unsatisfactory in some cases. Orthogonal pairs can be improved by manipulating either the AARS or the tRNA. However, directed evolution of tRNA or AARS using large libraries and dead/alive selection methods are not feasible in mammalian cells. Here, a facile and robust fluorescence-based assay to evaluate the efficiency of orthogonal pairs in mammalian cells is presented. The assay allows screening tens to hundreds of AARS/tRNA variants with a moderate effort and within a reasonable time. Use of this assay to generate new tRNAs that significantly improve the efficiency of the pyrrolysine orthogonal system is described, along with the application of ncAAs to the study of G-protein coupled receptors (GPCRs), which are challenging objects for ncAA mutagenesis. First, by systematically incorporating a photo-crosslinking ncAA throughout the extracellular surface of a receptor, binding sites of different ligands on the intact receptor are mapped directly in the live cell. Second, by incorporating last-generation ncAAs into a GPCR, ultrafast catalyst-free receptor labeling with a fluorescent dye is demonstrated, which exploits bioorthogonal strain-promoted inverse Diels Alder cycloaddition (SPIEDAC) on the live cell. As ncAAs can be generally applied to any protein independently on its size, the method is of general interest for a number of applications. In addition, ncAA incorporation does not require any special equipment and is easily performed in standard biochemistry labs.

Sterically Shielded, Stabilized Nitrile Imine for Rapid Bioorthogonal Protein Labeling in Live Cells

In pursuit of fast bioorthogonal reactions, reactive moieties have been increasingly employed for selective labeling of biomolecules in living systems, posing a challenge in attaining reactivity without sacrificing selectivity. To address this challenge, here we report a bioinspired strategy in which molecular shape controls the selectivity of a transient, highly reactive nitrile imine dipole. By tuning the shape of structural pendants attached to the ortho position of the N-aryl ring of diaryltetrazoles-precursors of nitrile imines, we discovered a sterically shielded nitrile imine that favors the 1,3-dipolar cycloaddition over the competing nucleophilic addition. The photogenerated nitrile imine exhibits an extraordinarily long half-life of 102 s in aqueous medium, owing to its unique molecular shape that hinders the approach of a nucleophile as shown by DFT calculations. The utility of this sterically shielded nitrile imine in rapid (∼1 min) bioorthogonal labeling of glucagon receptor in live mammalian cells was demonstrated.

Inverse electron demand Diels-Alder reactions in chemical biology

The emerging inverse electron demand Diels-Alder (IEDDA) reaction stands out from other bioorthogonal reactions by virtue of its unmatchable kinetics, excellent orthogonality and biocompatibility. With the recent discovery of novel dienophiles and optimal tetrazine coupling partners, attention has now been turned to the use of IEDDA approaches in basic biology, imaging and therapeutics. Here we review this bioorthogonal reaction and its promising applications for live cell and animal studies. We first discuss the key factors that contribute to the fast IEDDA kinetics and describe the most recent advances in the synthesis of tetrazine and dienophile coupling partners. Both coupling partners have been incorporated into proteins for tracking and imaging by use of fluorogenic tetrazines that become strongly fluorescent upon reaction. Selected notable examples of such applications are presented. The exceptional fast kinetics of this catalyst-free reaction, even using low concentrations of coupling partners, make it amenable for in vivo radiolabelling using pretargeting methodologies, which are also discussed. Finally, IEDDA reactions have recently found use in bioorthogonal decaging to activate proteins or drugs in gain-of-function strategies. We conclude by showing applications of the IEDDA reaction in the construction of biomaterials that are used for drug delivery and multimodal imaging, among others. The use and utility of the IEDDA reaction is interdisciplinary and promises to revolutionize chemical biology, radiochemistry and materials science.

Bioorthogonal Strategies for Engineering Extracellular Matrices

Hydrogels are commonly used as engineered extracellular matrix (ECM) mimics in applications ranging from tissue engineering to in vitro disease models. Ideal mechanisms used to crosslink ECM-mimicking hydrogels do not interfere with the biology of the system. However, most common hydrogel crosslinking chemistries exhibit some form of cross-reactivity. The field of bio-orthogonal chemistry has arisen to address the need for highly specific and robust reactions in biological contexts. Accordingly, bio-orthogonal crosslinking strategies have been incorporated into hydrogel design, allowing for gentle and efficient encapsulation of cells in various hydrogel materials. Furthermore, the selective nature of bio-orthogonal chemistries can permit dynamic modification of hydrogel materials in the presence of live cells and other biomolecules to alter matrix mechanical properties and biochemistry on demand. In this review, we provide an overview of bio-orthogonal strategies used to prepare cell-encapsulating hydrogels and highlight the potential applications of bio-orthogonal chemistries in the design of dynamic engineered ECMs.

Design and Synthesis of a BODIPY-Tetrazole Based "Off-On" in-Cell Fluorescence Reporter of Hydrogen Peroxide

BODIPY-linked bithiophene-tetrazoles were designed and synthesized for bioorthogonal photoclick reactions in vitro and in vivo. The reactivity of these tetrazoles toward dimethyl fumarate was found to depend on the BODIPY attachment site, with the meta-linked BODIPY-tetrazole being the most reactive. The resulting pyrazoline cycloadduct showed drastically reduced BODIPY fluorescence. However, BODIPY fluorescence recovered after treatment with hydrogen peroxide. This turn-on effect was attributed to conversion from the pyrazoline to a pyrazole. Finally, we showed that this unique BODIPY-tetrazole off-on fluorescence probe can be used to detect hydrogen peroxide inside HeLa cells.

A rapidly photo-activatable light-up fluorescent nucleoside and its application in DNA base variation sensing

A new DNA building block (d(Tet)U) bearing a tetrazole and allyloxy group at N-phenyl ring linked through an aminopropynyl linker to the 5-position of 2'-deoxyuridine was synthesized. The modified DNA can be lit up via a photoinduced intramolecular tetrazole-alkene cycloaddition reaction, but quenched when the fully-matched double strand is formed. This conspicuous difference in fluorescence could open a door for DNA single nucleotide polymorphism (SNP) typing.

Improved Photoinduced Fluorogenic Alkene-Tetrazole Reaction for Protein Labeling

The 1,3-dipolar cycloaddition reaction between an alkene and a tetrazole represents one elegant and rare example of fluorophore-forming bioorthogonal chemistry. This is an attractive reaction for imaging applications in live cells that requires less intensive washing steps and/or needs spatiotemporal resolutions. In the present work, as an effort to improve the fluorogenic property of the alkene-tetrazole reaction, an aromatic alkene (styrene) was investigated as the dipolarophile. Over 30-fold improvement in quantum yield of the reaction product was achieved in aqueous solution. According to our mechanistic studies, the observed improvement is likely due to an insufficient protonation of the styrene-tetrazole reaction product. This finding provides useful guidance to the future design of alkene-tetrazole reactions for biological studies. Fluorogenic protein labeling using the styrene-tetrazole reaction was demonstrated both in vitro and in vivo. This was realized by the genetic incorporation of an unnatural amino acid containing the styrene moiety. It is anticipated that the combination of styrene with different tetrazole derivatives can generally improve and broaden the application of alkene-tetrazole chemistry in real-time imaging in live cells.

A genetically encoded cyclobutene probe for labelling of live cells

We have identified an aminoacyl-tRNA synthetase/tRNA pair for the efficient and site-specific incorporation of a cyclobutene-containing amino acid into proteins in response to an amber nonsense codon. Fast and fluorescent labeling of purified proteins and intact proteins in live cells was demonstrated using the inverse electron demand Diels-Alder reaction with a tetrazine.

Bioorthogonal Cycloadditions: Computational Analysis with the Distortion/Interaction Model and Predictions of Reactivities

Bioorthogonal chemistry has had a major impact on the study of biological processes in vivo. Biomolecules of interest can be tracked by using probes and reporters that do not react with cellular components and do not interfere with metabolic processes in living cells. Much time and effort has been devoted to the screening of potential bioorthogonal reagents experimentally. This Account describes how our groups have performed computational screening of reactivity and mutual orthogonality. Our collaborations with experimentalists have led to the development of new and useful reactions. Dozens of bioorthogonal cycloadditions have been reported in the literature in the past few years, but as interest in tracking multiple targets arises, our computational screening has gained importance for the discovery of new mutually orthogonal bioorthogonal cycloaddition pairs. The reactivities of strained alkenes and alkynes with common 1,3-dipoles such as azides, along with mesoionic sydnones and other novel 1,3-dipoles, have been explored. Studies of "inverse-electron-demand" dienes such as triazines and tetrazines that have been used in bioorthogonal Diels-Alder cycloadditions are described. The color graphics we have developed give a snapshot of whether reactions are fast enough for cellular applications (green), adequately reactive for labeling (yellow), or only useful for synthesis or do not occur at all (red). The colors of each box give an instant view of rates, while bar graphs provide an analysis of the factors that control reactivity. This analysis uses the distortion/interaction or activation strain model of cycloaddition reactivity developed independently by our group and that of F. Matthias Bickelhaupt in The Netherlands. The model analyzes activation barriers in terms of the energy required to distort the reactants to the transition state geometry. This energy, called the distortion energy or activation strain, constitutes the major component of the activation energy. The strong bonding interaction between the termini of the two reactants, which we call the interaction energy, overcomes the distortion energy and leads to the new bonds in the products. This Account describes how we have analyzed and predicted bioorthogonal cycloaddition reactivity using the distortion/interaction model and how our experimental collaborators have employed these insights to create new bioorthogonal cycloadditions. The graphics we use document and predict which combinations of cycloadditions will be useful in bioorthogonal chemistry and which pairs of reactions are mutually orthogonal. For example, the fast reaction of 5-phenyl-1,2,4-triazine and a thiacycloheptyne will not interfere with the other fast reaction of 3,6-diphenyl-1,2,4,5-tetrazine and a cyclopropene. No cross reactions will occur, as these are very slow reactions.

Fine-Tuning Strain and Electronic Activation of Strain-Promoted 1,3-Dipolar Cycloadditions with Endocyclic Sulfamates in SNO-OCTs

The ability to achieve predictable control over the polarization of strained cycloalkynes can influence their behavior in subsequent reactions, providing opportunities to increase both rate and chemoselectivity. A series of new heterocyclic strained cyclooctynes containing a sulfamate backbone (SNO-OCTs) were prepared under mild conditions by employing ring expansions of silylated methyleneaziridines. SNO-OCT derivative 8 outpaced even a difluorinated cyclooctyne in a 1,3-dipolar cycloaddition with benzylazide. The various orbital interactions of the propargylic and homopropargylic heteroatoms in SNO-OCT were explored both experimentally and computationally. The inclusion of these heteroatoms had a positive impact on stability and reactivity, where electronic effects could be utilized to relieve ring strain. The choice of the heteroatom combinations in various SNO-OCTs significantly affected the alkyne geometries, thus illustrating a new strategy for modulating strain via remote substituents. Additionally, this unique heteroatom activation was capable of accelerating the rate of reaction of SNO-OCT with diazoacetamide over azidoacetamide, opening the possibility of further method development in the context of chemoselective, bioorthogonal labeling.

Vinyluridine as a Versatile Chemoselective Handle for the Post-transcriptional Chemical Functionalization of RNA

The development of modular and efficient methods to functionalize RNA with biophysical probes is very important in advancing the understanding of the structural and functional relevance of RNA in various cellular events. Herein, we demonstrate a two-step bioorthogonal chemical functionalization approach for the conjugation of multiple probes onto RNA transcripts using a 5-vinyl-modified uridine nucleotide analog (VUTP). VUTP, containing a structurally noninvasive and versatile chemoselective handle, was efficiently incorporated into RNA transcripts by in vitro transcription reactions. Furthermore, we show for the first time the use of a palladium-mediated oxidative Heck reaction in functionalizing RNA with fluorogenic probes by reacting vinyl-labeled RNA transcripts with appropriate boronic acid substrates. The vinyl label also permitted the post-transcriptional functionalization of RNA by a reagent-free inverse electron demand Diels-Alder (IEDDA) reaction in the presence of tetrazine substrates. Collectively, our results demonstrate that the incorporation of VUTP provides newer possibilities for the modular functionalization of RNA with variety of reporters.

Bio-orthogonal Fluorescent Labelling of Biopolymers through Inverse-Electron-Demand Diels-Alder Reactions

Bio-orthogonal labelling schemes based on inverse-electron-demand Diels-Alder (IEDDA) cycloaddition have attracted much attention in chemical biology recently. The appealing features of this reaction, such as the fast reaction kinetics, fully bio-orthogonal nature and high selectivity, have helped chemical biologists gain deeper understanding of biochemical processes at the molecular level. Listing the components and discussing the possibilities and limitations of these reagents, we provide a recent snapshot of the field of IEDDA-based biomolecular manipulation with special focus on fluorescent modulation approaches through the use of bio-orthogonalized building blocks. At the end, we discuss challenges that need to be addressed for further developments in order to overcome recent limitations and to enable researchers to answer biomolecular questions in more detail.

Cyclopropenes: a new tool for the study of biological systems

Cyclopropenes have become an important mini-tag tool in chemical biology, participating in fast inverse electron demand Diels–Alder and photoclick reactions in biological settings.

Photo-clickable microRNA for in situ fluorescence labeling and imaging of microRNA in living cells

A photo-clickable microRNA was constructed for in situ fluorescence labeling and imaging of microRNA in living cells with spatiotemporal resolution.

Unveiling a versatile heterocycle: pyrazoline – a review

The design and synthesis of novel fluorescent heterocyclic dyes is a “hotspot” research area, due to their favourable photophysical and electronic properties, which could allow huge advances in the fields of physics, chemistry and biology.

Bicyclo[6.1.0]nonyne and tetrazine amino acids for Diels–Alder reactions

Here we report a general method for the de novo synthesis of a bicyclo[6.1.0]nonyne group containing an amino acid, and used Marfey's reagent for chiral analysis.

A photocaged, cyclopropene-containing analog of the amino acid neurotransmitter glutamate

Substituted cyclopropenes serve as compact biorthogonal appendages that enable analysis of biomolecules in complex systems. Neurotransmitters, a chemically diverse group of biomolecules that control neuron excitation and inhibition, are not among the systems that have been studied using biorthogonal chemistry. Here we describe the synthesis of cyclopropene-containing analogs of the excitatory amino acid neurotransmitter glutamate starting from a Garner's aldehyde-derived alkyne. The deprotected cyclopropene glutamate was stable in solution but decomposed upon concentration. Appending a light-cleavable group improved the stability of the cyclopropene while simultaneously caging the neurotransmitter. This strategy has the potential to permit deployment of cyclopropene-modified glutamate as a bioorthogonal probe of the neurotransmitter glutamate in vivo with spatiotemporal precision.

Fluorogenic protein labeling using a genetically encoded unstrained alkene

A new fluorogenic bioorthogonal reaction between styrene (an unstrained alkene) and a tetrazine was developed.

We developed a new fluorogenic bioorthogonal reaction that is based on the inverse electron-demand Diels–Alder reaction between styrene (an unstrained alkene) and a simple tetrazine. The reaction forms a new fluorophore with no literature precedent. We have identified an aminoacyl-tRNA synthetase/tRNA pair for the efficient and site-specific incorporation of a styrene-containing amino acid into proteins in response to amber nonsense codon. Fluorogenic labeling of purified proteins and intact proteins in live cells were demonstrated. The fluorogenicity of the styrene–tetrazine reaction can be potentially applied to the study of protein folding and function under physiological conditions with low background fluorescence interference.

Getting a grip on glycans: A current overview of the metabolic oligosaccharide engineering toolbox

This review discusses the advances in metabolic oligosaccharide engineering (MOE) from 2010 to 2016 with a focus on the structure, preparation, and reactivity of its chemical probes. A brief historical overview of MOE is followed by a comprehensive overview of the chemical probes currently available in the MOE molecular toolbox and the bioconjugation techniques they enable. The final part of the review focusses on the synthesis of a selection of probes and finishes with an outlook on recent and potential upcoming advances in the field of MOE.

Metabolic Glycoengineering with N-Acyl Side Chain Modified Mannosamines

In metabolic glycoengineering (MGE), cells or animals are treated with unnatural derivatives of monosaccharides. After entering the cytosol, these sugar analogues are metabolized and subsequently expressed on newly synthesized glycoconjugates. The feasibility of MGE was first discovered for sialylated glycans, by using N-acyl-modified mannosamines as precursor molecules for unnatural sialic acids. Prerequisite is the promiscuity of the enzymes of the Roseman-Warren biosynthetic pathway. These enzymes were shown to tolerate specific modifications of the N-acyl side chain of mannosamine analogues, for example, elongation by one or more methylene groups (aliphatic modifications) or by insertion of reactive groups (bioorthogonal modifications). Unnatural sialic acids are incorporated into glycoconjugates of cells and organs. MGE has intriguing biological consequences for treated cells (aliphatic MGE) and offers the opportunity to visualize the topography and dynamics of sialylated glycans in vitro, ex vivo, and in vivo (bioorthogonal MGE).

Novel Strategy for Preparing Dual-Modality Optical/PET Imaging Probes via Photo-Click Chemistry

Preparation of small molecule based dual-modality probes remains a challenging task due to the complicated synthetic procedure. In this study, a novel concise and generic strategy for preparing dual-modality optical/PET imaging probes via photo-click chemistry was developed, in which the diazole photo-click linker functioned not only as a bridge between the targeting-ligand and the PET imaging moiety, but also as the fluorophore for optical imaging. A dual-modality AE105 peptidic probe was successfully generated via this strategy and subsequently applied in the fluorescent staining of U87MG cells and the (68)Ga based PET imaging of mice bearing U87MG xenograft. In addition, dual-modality monoclonal antibody cetuximab has also been generated via this strategy and labeled with (64)Cu for PET imaging studies, broadening the application of this strategy to include the preparation of macromolecule based imaging probes.

Fast and selective labeling of N-terminal cysteines at neutral pH via thiazolidino boronate formation

Facile labeling of proteins of interest is highly desirable in proteomic research as well as in the development of protein therapeutics.

Facile labeling of proteins of interest is highly desirable in proteomic research as well as in the development of protein therapeutics. Herein we report a novel method that allows for fast and selective labeling of proteins with an N-terminal cysteine. Although N-terminal cysteines are well known to conjugate with aldehydes to give thiazolidines, the reaction requires acidic conditions and suffers from slow kinetics. We show that benzaldehyde with an ortho-boronic acid substituent readily reacts with N-terminal cysteines at neutral pH, giving rate constants on the order of 10³ M^–1 s^–1. The product features a thiazolidino boronate (TzB) structure and exhibits improved stability due to formation of the B–N dative bond. While stable at neutral pH, the TzB complex dissociates upon mild acidification. These characteristics make the TzB conjugation chemistry potentially useful for the development of drug–protein conjugates that release the small molecule drug in acidic endosomes.

Efficient one-pot synthesis of 1-arylcycloprop-2-ene-1-carboxamides

An expeditious and cost-efficient method for synthesis of 1-arylcycloprop-2-ene-1-carboxamides was developed. This one-pot protocol involving coupling of amines with acyl chlorides, generated upon treatment of cyclopenylcarboxylic acids with oxalyl chloride, is applicable for the preparation of sensitive products with a reactive, unsubstituted strained double bond.

Photochemical Microcontact Printing by Tetrazole Chemistry

We developed a simple method to pattern self-assembled monolayers of tetrazole triethoxylsilane with a variety of different molecules by photochemical microcontact printing. Under irradiation, tetrazoles form highly reactive nitrile imines, which react with alkenes, alkynes, and thiols. The covalent linkage to the surface could be unambiguously demonstrated by fluorescence microscopy, because the reaction product is fluorescent in contrast to tetrazole. The modified surfaces were further analyzed by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), atomic force microscopy (AFM), and contact angle goniometry. Protein-repellent micropatterns, a biotin-streptavidin array, and structured polymer brushes could be fabricated with this straightforward method for surface functionalization.

Photo-Triggered Click Chemistry for Biological Applications

In the last decade and a half, numerous bioorthogonal reactions have been developed with a goal to study biological processes in their native environment, i.e., in living cells and animals. Among them, the photo-triggered reactions offer several unique advantages including operational simplicity with the use of light rather than toxic metal catalysts and ligands, and exceptional spatiotemporal control through the application of an appropriate light source with pre-selected wavelength, light intensity and exposure time. While the photoinduced reactions have been studied extensively in materials research, e.g., on macromolecular surface, the adaptation of these reactions for chemical biology applications is still in its infancy. In this chapter, we review the recent efforts in the discovery and optimization the photo-triggered bioorthogonal reactions, with a focus on those that have shown broad utility in biological systems. We discuss in each cases the chemical and mechanistic background, the kinetics of the reactions and the biological applicability together with the limiting factors.

Discovery of new mutually orthogonal bioorthogonal cycloaddition pairs through computational screening

Density functional theory (DFT) calculations and experiments in tandem led to discoveries of new reactivities and selectivities involving bioorthogonal sydnone cycloadditions. Dibenzocyclooctyne derivatives (DIBAC and BARAC) were identified to be especially reactive dipolarophiles, which undergo the (3 + 2) cycloadditions with N-phenyl sydnone with the rate constant of up to 1.46 M-1 s-1. Most significantly, the sydnone-dibenzocyclooctyne and norbornene-tetrazine cycloadditions were predicted to be mutually orthogonal. This was validated experimentally and used for highly selective fluorescence labeling of two proteins simultaneously.

Making a Long Journey Short: Alkyne Functionalization of Natural Product Scaffolds

Biological selection makes natural products promising scaffolds for drug development and the ever growing number of newly identified, structurally diverse molecules helps to fill the gaps in chemical space. Elucidating the function of a small molecule, such as identifying its protein binding partners, its on- and off-targets, is becoming increasingly important. Activity- and affinity-based protein profiling are modern strategies to acquire such molecular-level information. Introduction of a molecular handle (azide, alkyne, biotin) can shed light on the mode of action of small molecules. This Concept article covers central points on synthetic methodology for integrating a terminal alkyne into a molecule of interest.

Photo-induced coupling reactions of tetrazoles with carboxylic acids in aqueous solution: application in protein labelling

The coupling reactions of diaryltetrazoles with carboxylic acids under UV irradiation were investigated. Application of these transformations in chemical biology was demonstrated in photo-labelling the proteinogenic carboxylic acids in purified proteins, cell lysates and living cells.

Expansion of bioorthogonal chemistries towards site-specific polymer–protein conjugation

Bioorthogonal chemistries have been used to achieve polymer-protein conjugation with the retained critical properties.

Ring-opening metathesis polymerization of 1,2-disubstituted cyclopropenes

We report the first study of ROMP of 1,2-CPs, which yielded narrowly dispersed polymers but exhibited a surprising slow termination reaction.

Inverse Electron-Demand Diels-Alder Bioorthogonal Reactions

Bioorthogonal reactions have been widely used over the last 10 years for imaging, detection, diagnostics, drug delivery, and biomaterials. Tetrazine reactions are a recently developed class of inverse electron-demand Diels-Alder reactions used in bioorthogonal applications. Given their rapid tunable reaction rate and highly fluorogenic properties, tetrazine bioorthogonal reactions have come to be considered highly attractive tools for elucidating biological functions and messages in vitro and in vivo. In this chapter, we present recent advances expanding the scope of precursor reactivity and we introduce new biomedical methodology based on bioorthogonal tetrazine chemistry. We specifically highlight novel applications for different kinds of biomolecules, including nucleic acid, protein, antibodies, lipids, glycans, and bioactive small molecules, in the areas of imaging, detection, and diagnostics. We also briefly present other recently developed inverse electron-demand Diels-Alder bioorthogonal reactions. Lastly, we consider future directions and potential roles that inverse electron-demand Diels-Alder reactions may play in the fields of bioorthogonal and biomedical chemistry.

Rapid probing of sialylated glycoproteins in vitro and in vivo via metabolic oligosaccharide engineering of a minimal cyclopropene reporter

ManNAc analogues are important chemical tools for probing sialylation dynamically via metabolic oligosaccharide engineering (MOE). The size of N-acyl and the nature of the chemical handle are two determinants of metabolic incorporation efficiency. We demonstrated a minimal, stable, bioorthogonal, and reactive N-Cp (N-(cycloprop-2-ene-1-ylcarbonyl)) group and the imaging of sialylated glycans using Ac4ManNCp in vitro and in vivo. The results revealed that the Cp group can efficiently be incorporated into the cellular sialic acid and detected rapidly by the reaction with FITC-Tz in different cells. The metabolic incorporation efficiency of non-cytotoxic Ac4ManNCp is not only superior to Ac4ManNMCp, but also superior to the widely-used Ac4ManNAz in some cell lines. Moreover, when Ac4ManNCp was administered to mice, a rapid and intense labelling of splenocytes as well as glycoproteins of sera and organs was observed. This is the first reported metabolic labelling of cyclopropene-modified sugars in vivo. Therefore, Ac4ManNCp is a powerful probe for efficient and rapid MOE and it may find wide applications in the labelling of glycans.