Semiconducting Polymer Nanoparticles with Persistent Near-Infrared Luminescence for In Vivo Optical Imaging

Near-IR emissive rare-earth nanoparticles for guided surgery

Intraoperative image-guided surgery (IGS) has attracted extensive research interests in determination of tumor margins from surrounding normal tissues. Introduction of near infrared (NIR) fluorophores into IGS could significantly improve the in vivo imaging quality thus benefit IGS. Among the reported NIR fluorophores, rare-earth nanoparticles exhibit unparalleled advantages in disease theranostics by taking advantages such as large Stokes shift, sharp emission spectra, and high chemical/photochemical stability. The recent advances in elements doping and morphologies controlling endow the rare-earth nanoparticles with intriguing optical properties, including emission span to NIR-II region and long life-time photoluminescence. Particularly, NIR emissive rare earth nanoparticles hold advantages in reduction of light scattering, photon absorption and autofluorescence, largely improve the performance of nanoparticles in biological and pre-clinical applications. In this review, we systematically compared the benefits of RE nanoparticles with other NIR probes, and summarized the recent advances of NIR emissive RE nanoparticles in bioimaging, photodynamic therapy, drug delivery and NIR fluorescent IGS. The future challenges and promises of NIR emissive RE nanoparticles for IGS were also discussed.

H2S-activatable near-infrared afterglow luminescent probes for sensitive molecular imaging in vivo

Afterglow luminescent probes with high signal-to-background ratio show promise for in vivo imaging; however, such probes that can be selectively delivered into target sites and switch on afterglow luminescence remain limited. We optimize an organic electrochromic material and integrate it into near-infrared (NIR) photosensitizer (silicon 2,3-naphthalocyanine bis(trihexylsilyloxide) and (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) containing nanoparticles, developing an H2S-activatable NIR afterglow probe (F12+-ANP). F12+-ANP displays a fast reaction rate (1563 ± 141 M-1 s-1) and large afterglow turn-on ratio (~122-fold) toward H2S, enabling high-sensitivity and -specificity measurement of H2S concentration in bloods from healthy persons, hepatic or colorectal cancer patients. We further construct a hepatic-tumor-targeting and H2S-activatable afterglow probe (F12+-ANP-Gal) for noninvasive, real-time imaging of tiny subcutaneous HepG2 tumors (<3 mm in diameter) and orthotopic liver tumors in mice. Strikingly, F12+-ANP-Gal accurately delineates tumor margins in excised hepatic cancer specimens, which may facilitate intraoperative guidance of hepatic cancer surgery.

Highly Efficient Organic Afterglow from a 2D Layered Lead-Free Metal Halide in Both Crystals and Thin Films under an Air Atmosphere

Organic afterglow materials (OAMs) with a lifetime longer than 0.1 s have recently received much attention for their fascinating properties meeting the critical requirements of applications in newly emerged technologies. However, the development of OAMs lags behind for their low luminescence efficiency. Usually, enhancing the phosphorescence efficiency of organic materials causes a short lifetime. Here, we report two kinds of OAMs, two-dimensional (2D) layered organic-inorganic hybrid zinc bromides (PEZB-NTA and PEZB-BPA), obtained in an environmentally friendly ethanol solvent by a low-temperature solution method. They display highly efficient and persistent luminescence in air in both crystals and thin films with phosphorescence quantum yields up to 42% in crystals and 27% in films. For OAMs, the two quantum yields are the highest values ever reported for crystals and films. Due to the excellent crystalline and film-forming ability, PEZB-NTA and PEZB-BPA in ethanol can be used as inks to construct patterns on various rigid and flexible substrates, including paper, iron, plastic, marble, tin foil, and cloth. Consequently, the novel OAMs show great application prospects in the fields of anti-counterfeiting and information storage because of their economic synthesis, solution processing, and easy operation.

π-Type halogen bonding enhanced the long-lasting room temperature phosphorescence of Zn(ii) coordination polymers for photoelectron response applications

Long-lasting phosphorescence emission was achieved via π-type halogen bonding in Zn(ii) based coordination polymers. The delocalized H-aggregates afforded large electron channels for efficient charge transport and high photoelectron response.

Self-Illuminating Agents for Deep-Tissue Optical Imaging

Optical imaging plays an indispensable role in biology and medicine attributing to its noninvasiveness, high spatiotemporal resolution, and high sensitivity. However, as a conventional optical imaging modality, fluorescence imaging confronts issues of shallow imaging depth due to the need for real-time light excitation which produces tissue autofluorescence. By contrast, self-luminescence imaging eliminates the concurrent light excitation, permitting deeper imaging depth and higher signal-to-background ratio (SBR), which has attracted growing attention. Herein, this review summarizes the progress on the development of near-infrared (NIR) emitting self-luminescence agents in deep-tissue optical imaging with highlighting the design principles including molecular- and nano-engineering approaches. Finally, it discusses current challenges and guidelines to develop more effective self-illuminating agents for biomedical diagnosis and treatment.

An Organic Afterglow Protheranostic Nanoassembly

Cancer theranostics holds potential promise for precision medicine; however, most existing theranostic nanoagents are simply developed by doping both therapeutic agents and imaging agent into one particle entity, and thus have an "always-on" pharmaceutical effect and imaging signals regardless of their in vivo location. Herein, the development of an organic afterglow protheranostic nanoassembly (APtN) that specifically activates both the pharmaceutical effect and diagnostic signals in response to a tumor-associated chemical mediator (hydrogen peroxide, H₂ O₂ ) is reported. APtN comprises an amphiphilic macromolecule and a near-infrared (NIR) dye acting as the H₂ O₂ -responsive afterglow prodrug and the afterglow initiator, respectively. Such a molecular architecture allows APtN to passively target tumors in living mice, specifically release the anticancer drug in the tumor, and spontaneously generate the uncaged afterglow substrate. Upon NIR light preirradiation, the afterglow initiator generates singlet oxygen to react and subsequently transform the uncaged afterglow substrate into an active self-luminescent form. Thus, the intensity of generated afterglow luminescence is correlated with the drug release status, permitting real-time in vivo monitoring of prodrug activation. This study proposes a background-free design strategy toward activatable cancer theranostics.

Crucial Breakthrough of Functional Persistent Luminescence Materials for Biomedical and Information Technological Applications

Persistent luminescence is a phenomenon in which luminescence is maintained for minutes to hours without an excitation source. Owing to their unique optical properties, various kinds of persistent luminescence materials (PLMs) have been developed and widely employed in numerous areas, such as bioimaging, phototherapy, data-storage, and security technologies. Due to the complete separation of two processes, -excitation and emission-, minimal tissue absorption, and negligible autofluorescence can be obtained during biomedical fluorescence imaging using PLMs. Rechargeable PLMs with super long afterglow life provide novel approaches for long-term phototherapy. Moreover, owing to the exclusion of external excitation and the optical rechargeable features, multicolor PLMs, which have higher decoding signal-to-noise ratios and high storage capability, exhibited an enormous application potential in information technology. Therefore, PLMs have significantly promoted the application of optics in the fields of multimodal bioimaging, theranostics, and information technology. In this review, we focus on the recently developed PLMs, including inorganic, organic and inorganic-organic hybrid PLMs to demonstrate their superior applications potential in biomedicine and information technology.

Application of Förster Resonance Energy Transfer (FRET) technique to elucidate intracellular and In Vivo biofate of nanomedicines

Extensive studies on nanomedicines have been conducted for drug delivery and disease diagnosis (especially for cancer therapy). However, the intracellular and in vivo biofate of nanomedicines, which is significantly associated with their clinical therapeutic effect, is poorly understood at present. This is because of the technical challenges to quantify the disassembly and behaviour of nanomedicines. As a fluorescence- and distance-based approach, the Förster Resonance Energy Transfer (FRET) technique is very successful to study the interaction of nanomedicines with biological systems. In this review, principles on how to select a FRET pair and construct FRET-based nanomedicines have been described first, followed by their application to study structural integrity, biodistribution, disassembly kinetics, and elimination of nanomedicines at intracellular and in vivo levels, especially with drug nanocarriers including polymeric micelles, polymeric nanoparticles, and lipid-based nanoparticles. FRET is a powerful tool to reveal changes and interaction of nanoparticles after delivery, which will be very useful to guide future developments of nanomedicine.

Predicting Phosphorescence Rates of Light Organic Molecules Using Time-Dependent Density Functional Theory and the Path Integral Approach to Dynamics

In this work, we present a general method for predicting phosphorescence rates and spectra for molecules using time-dependent density functional theory (TD-DFT) and a path integral approach for the dynamics that relies on the harmonic oscillator approximation for the nuclear movement. We first discuss the theory involved in including spin–orbit coupling (SOC) among singlet and triplet excited states and then how to compute the corrected transition dipole moments and phosphorescence rates. We investigate the dependence of these rates on some TD-DFT parameters, such as the nature of the functional, the number of roots, and the Tamm–Dancoff approximation. After that, we evaluate the effect of different SOC integral schemes and show that our best method is applicable to a large number of systems with different excited state characters.

Radioluminescence in biomedicine: physics, applications, and models

The electromagnetic spectrum contains different frequency bands useful for medical imaging and therapy. Short wavelengths (ionizing radiation) are commonly used for radiological and radionuclide imaging and for cancer radiation therapy. Intermediate wavelengths (optical radiation) are useful for more localized imaging and for photodynamic therapy (PDT). Finally, longer wavelengths are the basis for magnetic resonance imaging and for hyperthermia treatments. Recently, there has been a surge of interest for new biomedical methods that synergize optical and ionizing radiation by exploiting the ability of ionizing radiation to stimulate optical emissions. These physical phenomena, together known as radioluminescence, are being used for applications as diverse as radionuclide imaging, radiation therapy monitoring, phototherapy, and nanoparticle-based molecular imaging. This review provides a comprehensive treatment of the physics of radioluminescence and includes simple analytical models to estimate the luminescence yield of scintillators and nanoscintillators, Cherenkov radiation, air fluorescence, and biologically endogenous radioluminescence. Examples of methods that use radioluminescence for diagnostic or therapeutic applications are reviewed and analyzed in light of these quantitative physical models of radioluminescence.

Near-Infrared Afterglow Luminescent Aggregation-Induced Emission Dots with Ultrahigh Tumor-to-Liver Signal Ratio for Promoted Image-Guided Cancer Surgery

Afterglow imaging through the collection of persistent luminescence after the stopping of light excitation holds enormous promise for advanced biomedical uses. However, efficient near-infrared (NIR)-emitting afterglow luminescent materials and probes (particularly the organic and polymeric ones) are still very limited, and their in-depth biomedical applications such as precise image-guided cancer surgery are rarely reported. Here, we design and synthesize a NIR afterglow luminescent nanoparticle with aggregation-induced emission (AIE) characteristics (named AGL AIE dots). It is demonstrated that the AGL AIE dots emit rather-high NIR afterglow luminescence persisting over 10 days after the stopping of a single excitation through a series of processes occurring in the AIE dots, including singlet oxygen production by AIE luminogens (AIEgens), Schaap's dioxetane formation, chemiexcitation by dioxetane decomposition, and energy transfer to NIR-emitting AIEgens. The animal studies reveal that the AGL AIE dots have the innate property of fast afterglow signal quenching in normal tissues, including the liver, spleen, and kidney. After the intravenous injection of AGL AIE dots into peritoneal carcinomatosis bearing mice, the tumor-to-liver ratio of afterglow imaging is nearly 100-fold larger than that for fluorescence imaging. The ultrahigh tumor-to-liver signal ratio, together with low afterglow background noise, enables AGL AIE dots to give excellent performance in precise image-guided cancer surgery.

Facile synthesis of a micro-scale MOF host–guest with long-lasting phosphorescence and enhanced optoelectronic performance

Micro-scale MOF host–guest with tunable phosphorescence and enhanced optoelectronic performance can be obtained by a facile and scalable precipitation process in aqueous solution.

Facile core–shell nanoparticles with controllable antibacterial activity assembled by chemical and biological molecules

A newly switchable antibacterial self-assembly was developed by conjugated polymer nanoparticles, DNA, Hoechst 33258 and deoxyribonuclease I.

Development of fluorescent nanoparticles with aggregation-induced delayed fluorescence features, improved brightness and photostability for living cells imaging

Bright, photostable fluorescent nanoparticles with long fluorescence lifetimes were fabricated based on fluorophores with AIE and TADF characteristics for bioimaging.

Self-Assembled Fluorescent Organic Nanomaterials for Biomedical Imaging

Fluorescent nanomaterials, self-assembled from building blocks through multiple intermolecular interactions show diversified structures and functionalities, and are potential fluorescence contrast agents/probes for high-performance biomedical imaging. Self-assembled nanomaterials exhibit high stability, long circulation time, and targeted biological distribution. This review summarizes recent advances of self-assembled nanomaterials as fluorescence contrast agents/probes for biomedical imaging. The self-assembled nanomaterials are classified into two groups, i.e., ex situ and in situ construction of self-assembled nanomaterials. The advantages of ex situ as well as in situ constructed nanomaterials for biomedical applications are discussed thoroughly. The directions of future developments for self-assembled nanomaterials are provided.

Wide-Range Tuning and Enhancement of Organic Long-Persistent Luminescence Using Emitter Dopants

Most long-persistent luminescent (LPL) materials, which slowly release energy absorbed from ambient light, are based on inorganic compounds. Organic long-persistent luminescent (OLPL) systems have advantages over inorganic LPL materials in terms of solubility, transparency, and flexibility. Here, the characteristics of OLPL emission are improved by doping emitter molecules into an OLPL matrix. Greenish-blue to red and even warm white emission are achieved by energy transfer from exciplex in the OLPL matrix to the emitter dopants. The dopants also improve brightness and emission duration through efficient radiative decay and the trapping of electrons, respectively. This technique will enable the development of a wide range of organic glow-in-the-dark paints.

Semiconducting Photosensitizer-Incorporated Copolymers as Near-Infrared Afterglow Nanoagents for Tumor Imaging

The fact that cancer metastasis is the main cause of death for most cancer patients necessitates the development of imaging tools for sensitive detection of metastases. Although optical imaging has high temporospatial resolution, tissue autofluorescence compromises the sensitivity for in vivo imaging of cancer metastasis. Herein, the synthesis of a series of photosensitizer-incorporated poly(p-phenylenevinylene)-based semiconducting copolymers and their utility as near-infrared (NIR) afterglow imaging nanoagents that emit light after cessation of light irradiation are reported. As compared with nondoped nanoparticles, the nanoparticles derived from the photosensitizer-incorporated copolymers have red-shifted NIR luminescence and amplified afterglow signals, allowing the detection of tiny peritoneal metastatic tumors almost invisible to naked eye. Moreover, the intrinsic oxygen-sensitive nature of afterglow makes those nanoagents potentially useful for in vivo imaging of oxygen levels. Thus, this study introduces a generation of light-excitation-free background-minimized optical imaging agents for the sensitive detection of diseased tissues in vivo.

The evolution of artificial light actuators in living systems: from planar to nanostructured interfaces

Artificially enhancing light sensitivity in living cells allows control of neuronal paths or vital functions avoiding the wiring associated with the use of stimulation electrodes. Many possible strategies can be adopted for reaching this goal, including the direct photoexcitation of biological matter, the genetic modification of cells or the use of opto-bio interfaces. In this review we describe different light actuators based on both inorganic and organic semiconductors, from planar abiotic/biotic interfaces to nanoparticles, that allow transduction of a light signal into a signal which in turn affects the biological activity of the hosting system. In particular, we will focus on the application of thiophene-based materials which, thanks to their unique chemical-physical properties, geometrical adaptability, great biocompatibility and stability, have allowed the development of a new generation of fully organic light actuators for in vivo applications.

Organic emitter integrating aggregation-induced delayed fluorescence and room-temperature phosphorescence characteristics, and its application in time-resolved luminescence imaging

A luminophore integrating aggregation-induced delayed fluorescence and room-temperature phosphorescence for time-resolved luminescence imaging.

Thermally activated delayed fluorescence (TADF) with a substantially long lifetime furnishes a new paradigm in developing probes for time-resolved imaging. Herein, a novel TADF fluorophore, namely, PXZT, with terpyridine as the acceptor and phenoxazine (PXZ) as the donor, was rationally designed and synthesized. The new compound shows typical thermally activated delayed fluorescence, aggregation-induced emission and crystallization-induced room-temperature phosphorescence (RTP). The coordination of PXZT with a zinc ion causes the quenching of the fluorescence of PXZT due to the enhanced intramolecular charge transfer of the resulting complex ZnPXZT1. With the dissociation of the ZnPXZT1 to release PXZT and the subsequent in situ hydrophobic aggregation of the free PXZT to resist the influence of oxygen, the TADF emission of PXZT is recovered. This zinc-assisted process is successfully used for time-resolved imaging of HeLa and 3T3 cells. This work presents a simple and effective strategy for time-resolved imaging by in situ forming TADF aggregates to turn on the TADF emission.

Self-Assembled Semiconducting Polymer Nanoparticles for Ultrasensitive Near-Infrared Afterglow Imaging of Metastatic Tumors

Detection of metastatic tumor tissues is crucial for cancer therapy; however, fluorescence agents that allow to do share the disadvantage of low signal-to-background ratio due to tissue autofluorescence. The development of amphiphilic poly(p-phenylenevinylene) derivatives that can self-assemble into the nanoagent (SPPVN) in biological solutions and emit near-infrared afterglow luminescence after cessation of light irradiation for ultrasensitive imaging of metastatic tumors in living mice is herein reported. As compared with the counterpart nanoparticle (PPVP) prepared from the hydrophobic PPV derivate, SPPVN has smaller size, higher energy transfer efficiency, and brighter afterglow luminescence. Moreover, due to the higher PEG density of SPPVN relative to PPVP poly(ethylene glycol), SPPVN has a better accumulation in tumor. Such a high sensitivity and ideal biodistribution allow SPPVN to rapidly detect xenograft tumors with the size as small as 1 mm³ and tiny peritoneal metastatic tumors that are almost invisible to naked eye, which is not possible for PPVP. Moreover, the oxygen-sensitive afterglow makes SPPVN potentially useful for in vivo imaging of oxygen levels. By virtue of enzymatic biodegradability and ideal in vivo clearance, these organic agents can serve as a platform for the construction of advanced afterglow imaging tools.

Efficient Blue to Red Afterglow Tuning in a Binary Nanocomposite Plastic Film

Colorful spectra are important for the diverse applications of persistent phosphors. A color conversion concept is developed to obtain abundant persistent luminescence color by mining capacities of known persistent phosphors with the most efficient persistent properties. Here, SiO₂/Sr₂MgSi₂O₇:Eu,Dy nanoparticles are chosen as a blue persistent luminescence donor nanophosphor, while ultrafine CaAlSiN₃:Eu is utilized as a red conversion phosphor to tune the persistent luminescence spectra from blue to red. The red afterglow emission can persist for more than 5 h. The decay of the red afterglow follows nearly the same kinetics as that of the blue one. Continuous color tuning can be successfully obtained by simply changing the mass ratio of the donor/conversion phosphor pair. This color conversion strategy may be significant in indicating numerous persistent/conversion nanocomposites or nanostructures and advance the development of persistent phosphors in diverse fields which need colorful spectral properties.

Diketopyrrolopyrrole-based semiconducting polymer nanoparticles for in vivo second near-infrared window imaging and image-guided tumor surgery

A diketopyrrolopyrrole-based semiconducting polymer nanoparticle (PDFT1032) has been developed as a NIR-II (near infrared window II, 1000-1700 nm) fluorescent probe. It shows high photostability, a favorable absorption peak at 809 nm, a large Stokes shift of 223 nm, outstanding biocompatibility and minimal in vivo toxicity. More importantly, the versatile use of PDFT1032 for several important biomedical applications in the NIR-II window has been demonstrated, including the NIR-II optical imaging of tumors on a subcutaneous osteosarcoma model, assessing the vascular embolization therapy of tumors, and NIR-II image-guided orthotopic tumor surgery and sentinel lymph node biopsy (SLNB) with high spatial and temporal resolution. Overall, excellent biocompatibility, favorable hydrophilicity, and desirable chemical and optical properties make the semiconducting polymer nanoparticle PDFT1032 a highly promising NIR-II imaging probe with the potential to be widely applicable in clinical imaging and the surgical treatment of malignancy.

Induction of long-lived room temperature phosphorescence of carbon dots by water in hydrogen-bonded matrices

Phosphorescence shows great potential for application in bioimaging and ion detection because of its long-lived luminescence and high signal-to-noise ratio, but establishing phosphorescence emission in aqueous environments remains a challenge. Herein, we present a general design strategy that effectively promotes phosphorescence by utilising water molecules to construct hydrogen-bonded networks between carbon dots (CDs) and cyanuric acid (CA). Interestingly, water molecules not only cause no phosphorescence quenching but also greatly enhance the phosphorescence emission. This enhancement behaviour can be explained by the fact that the highly ordered bound water on the CA particle surface can construct robust bridge-like hydrogen-bonded networks between the CDs and CA, which not only effectively rigidifies the C=O bonds of the CDs but also greatly enhances the rigidity of the entire system. In addition, the CD-CA suspension exhibits a high phosphorescence lifetime (687 ms) and is successfully applied in ion detection based on its visible phosphorescence.

Near infrared-emitting persistent luminescent nanoparticles for Hepatocellular Carcinoma imaging and luminescence-guided surgery

Hepatocellular carcinoma (HCC), the fifth most common cancer worldwide, is increasing nowadays and poses a serious threat to human health. However, if treated effectively and timely, it is clinically manageable or curable. Therefore, accurate detection and complete surgical resection remain priorities for HCC with a high potential of improving both survival and quality of life. Lacking of real-time guide technology, traditional surgery are usually relied on the subjective experience of surgeon, which have the limitation of high sensitivity detection tumor. Here, we developed a contrast agent, ZnGa₂O₄Cr_0.004 (ZGC), used for guided surgery during operation to accurate delineation of HCC. ZGC showed excellent long-lasting afterglow properties that lasted for hours, which can aid in real-time guided surgery. Meanwhile, ZGC display high spatial resolution and deep penetration during pre-operation for diagnostic computed tomography (CT). Interestingly, we observed reverse imaging in the tumor region, known as a "dark hole", which further improves the contrast for surgery. This new multi-modality nanoparticle has great potential for accurate liver cancer imaging and resection guidance.

Recent progress on semiconducting polymer nanoparticles for molecular imaging and cancer phototherapy

As a new class of organic optical nanomaterials, semiconducting polymer nanoparticles (SPNs) have the advantages of excellent optical properties, high photostability, facile surface functionalization, and are considered to possess good biocompatibility for biomedical applications. This review surveys recent progress made on the design and synthesis of SPNs for molecular imaging and cancer phototherapy. A variety of novel polymer design, chemical modification and nanoengineering strategies have been developed to precisely tune up optoelectronic properties of SPNs to enable fluorescence, chemiluminescence and photoacoustic (PA) imaging in living animals. With these imaging modalities, SPNs have been demonstrated not only to image tissues such as lymph nodes, vascular structure and tumors, but also to detect disease biomarkers such as reactive oxygen species (ROS) and protein sulfenic acid as well as physiological indexes such as pH and blood glucose concentration. The potentials of SPNs in cancer phototherapy including photodynamic and photothermal therapy are also highlighted with recent examples. Future efforts should further expand the use of SPNs in biomedical research and may even move them beyond pre-clinical studies.

Twisted Molecular Structure on Tuning Ultralong Organic Phosphorescence

Compared to planar carbazole, the molecular conjugation of iminodibenzyl (Id) was destroyed by a C-C bond and a twisted structure was formed, which exhibited blue-shifted ultralong phosphorescence with a lifetime of 402 ms in a crystal under ambient conditions. For the presence of an oscillating C-C bond between the two benzene rings in Id, more than one molecular configuration in the crystal was discovered by X-ray single-crystal analysis. Moreover, its ultralong phosphorescence color changed from blue to green by varying the excitation wavelength in solution at 77 K. Theoretical calculations also confirmed that different molecular configurations had certain impact on the phosphorescent photophysical properties. This result will allow a major step forward in expanding the scope of ultralong organic phosphorescent (UOP) materials, building a bridge to realize the relationship between molecular structure and UOP property.

Carbon Dots/Prussian Blue Satellite/Core Nanocomposites for Optical Imaging and Photothermal Therapy

Integration of optical imaging modality with photothermal therapy (PTT) for simultaneously providing oncotherapy and bioimaging enables an optimized therapeutic efficacy and higher treatment accuracy and therefore has emerged as a prospective cancer treatment. However, it remains challenging to develop biocompatible PTT nanoagents capable of imaging, monitoring, and diagnosis. Carbon dots (CDs) possess unique photoluminescent (PL) properties and intrinsic biocompatibility; while Prussian blue nanoparticles (PBNPs) are nontoxic with efficient photothermal conversion capacity for PTT. Herein, a simple, cost-effective, and environmentally benign method was developed to strategically fabricate CD-decorated PBNP (CDs/PBNP) nanocomposites with satellite/core structure. The CDs/PBNPs possess distinct green PL emission and near-infrared photoabsorption with high efficiency and photothermal stability. In vitro and in vivo toxicity tests prove the biocompatibility of the CDs/PBNPs. Moreover, the applicability of CDs/PBNPs as nanotheranostic agents was tested, which suggests that CDs/PBNPs possess promising imaging and effective tumor ablation properties.

Optical molecular imaging for tumor detection and image-guided surgery

We have witnessed rapid development of fluorescence molecular imaging of solid tumors for cancer diagnosis and image-guided surgery in the past decade. Many biomarkers unique to cancer cells or tumor microenvironment, such as cell surface receptors, hypoxia, secreted proteases and extracellular acidosis have been characterized, and can be used to distinguish cancer from normal tissue. A variety of optical imaging probes have been developed to target these biomarkers to improve tumor contrast over the background tissue. Unlike conventional anatomical and molecular imaging technologies, fluorescent imaging method benefits from its safety, high-spatial resolution and real-time capability, and therefore, has become a highly adoptable imaging method for tumor detection and image-guided surgery in clinics. In this review, we summarize recent progress in 'always-ON' and stimuli-activatable fluorescent imaging probes, and discuss their potentials in tumor detection and image-guided surgery.

Near-Infrared Emissive Discrete Platinum(II) Metallacycles: Synthesis and Application in Ammonia Detection

Two novel discrete organoplatinum(II) metallacycles are prepared by means of coordination-driven self-assembly of a 90° organoplatinum(II) acceptor, cis-(PEt3)2Pt(OTf)2, with two donors, a pyridyl donor, 9,10-di(4-pyridylvinyl)anthracene, and one of two dicarboxylate ligands. Both metallacycles display aggregation-induced emission as well as solvatochromism. More interestingly, both metallacycles exhibit near-infrared fluorescent emission in the solid state and can be used to detect ammonia gas.

Molecular afterglow imaging with bright, biodegradable polymer nanoparticles

Afterglow optical agents, which emit light long after cessation of excitation, hold promise for ultrasensitive in vivo imaging because they eliminate tissue autofluorescence. However, afterglow imaging has been limited by its reliance on inorganic nanoparticles with relatively low brightness and short-near-infrared (NIR) emission. Here we present semiconducting polymer nanoparticles (SPNs) <40 nm in diameter that store photon energy via chemical defects and emit long-NIR afterglow luminescence at 780 nm with a half-life of ∼6 min. In vivo, the afterglow intensity of SPNs is more than 100-fold brighter than that of inorganic afterglow agents, and the signal is detectable through the body of a live mouse. High-contrast lymph node and tumor imaging in living mice is demonstrated with a signal-to-background ratio up to 127-times higher than that obtained by NIR fluorescence imaging. Moreover, we developed an afterglow probe, activated only in the presence of biothiols, for early detection of drug-induced hepatotoxicity in living mice.

Single Near-Infrared Emissive Polymer Nanoparticles as Versatile Phototheranostics

Attaining consistently high performance of diagnostic and therapeutic functions in one single nanoplatform is of great significance for nanomedicine. This study demonstrates the use of donor-acceptor (D-A) structured polymer (TBT) to develop a smart "all-five-in-one" theranostic that conveniently integrates fluorescence/photoacoustic/thermal imaging and photodynamic/photothermal therapy into single nanoparticle. The prepared nanoparticles (TBTPNPs) exhibit near-infrared emission, high water solubility, excellent light resistance, good pH stability, and negligible toxicity. Additionally, the TBTPNPs exhibit an excellent singlet oxygen (1O2) quantum yield (40%) and high photothermal conversion efficiency (37.1%) under single-laser irradiation (635 nm). Apart from their two phototherapeutic modalities, fluorescence, photoacoustic signals, and thermal imaging in vivo can be simultaneously achieved because of their enhanced permeability and retention effects. This work demonstrates that the prepared TBTPNPs are "all-five-in-one" phototheranostic agents that can exhibit properties to satisfy the "one-fits-all" requirement for future phototheranostic applications. Thus, the prepared TBTPNPs can provide fundamental insights into the development of PNP-based nanoagents for cancer therapy.

Bio-degradable highly fluorescent conjugated polymer nanoparticles for bio-medical imaging applications

Conjugated polymer nanoparticles exhibit strong fluorescence and have been applied for biological fluorescence imaging in cell culture and in small animals. However, conjugated polymer particles are hydrophobic and often chemically inert materials with diameters ranging from below 50 nm to several microns. As such, conjugated polymer nanoparticles cannot be excreted through the renal system. This drawback has prevented their application for clinical bio-medical imaging. Here, we present fully conjugated polymer nanoparticles based on imidazole units. These nanoparticles can be bio-degraded by activated macrophages. Reactive oxygen species induce scission of the conjugated polymer backbone at the imidazole unit, leading to complete decomposition of the particles into soluble low molecular weight fragments. Furthermore, the nanoparticles can be surface functionalized for directed targeting. The approach opens a wide range of opportunities for conjugated polymer particles in the fields of medical imaging, drug-delivery, and theranostics.

Conjugated polymer nanoparticles have been applied for biological fluorescence imaging in cell culture and in small animals, but cannot readily be excreted through the renal system. Here the authors show fully conjugated polymer nanoparticles based on imidazole units that can be bio-degraded by activated macrophages.

Versatile Polymer Nanoparticles as Two-Photon-Triggered Photosensitizers for Simultaneous Cellular, Deep-Tissue Imaging, and Photodynamic Therapy

Clinical applications of current photodynamic therapy (PDT) photosensitizers (PSs) are often limited by their absorption in the UV-vis range that possesses limited tissue penetration ability, leading to ineffective therapeutic response for deep-seated tumors. Alternatively, two-photon excited PS (TPE-PS) using NIR light triggered is one the most promising candidates for PDT improvement. Herein, multimodal polymer nanoparticles (PNPs) from polythiophene derivative as two-photon fluorescence imaging as well as two-photon-excited PDT agent are developed. The prepared PNPs exhibit excellent water dispersibility, high photostability and pH stability, strong fluorescence brightness, and low dark toxicity. More importantly, the PNPs also possess other outstanding features including: (1) the high ¹ O₂ quantum yield; (2) the strong two-photon-induced fluorescence and efficient ¹ O₂ generation; (3) the specific accumulation in lysosomes of HeLa cells; and (4) the imaging detection depth up to 2100 µm in the mock tissue under two-photon. The multifunctional PNPs are promising candidates as TPE-PDT agent for simultaneous cellular, deep-tissue imaging, and highly efficient in vivo PDT of cancer.

A Versatile Near Infrared Light Triggered Dual-Photosensitizer for Synchronous Bioimaging and Photodynamic Therapy

Photodynamic therapy (PDT) based on Tm³⁺-activated up-conversion nanoparticles (UCNPs) can effectively eliminate tumor cells by triggering inorganic photosensitizers to generate cytotoxic reactive oxygen species (ROS) upon tissue penetrating near-infrared (NIR) light irradiation. However, the partial use of the emitted lights from UCNPs greatly hinders their application. Here we develop a novel dual-photosensitizer nanoplatform by coating mesoporous graphitic-phase carbon nitride (g-C₃N₄) layer on UCNPs core, followed by attaching ultrasmall Au₂₅ nanoclusters and PEG molecules (named as UCNPs@g-C₃N₄-Au₂₅-PEG). The ultraviolet-visible (UV-vis) light and the intensive near infrared (NIR) emission from UCNPs can activate g-C₃N₄ and excite Au₂₅ nanoclusters to produce ROS, respectively, and thus realize the simultaneous activation of two kinds of photosensitizers for enhanced the efficiency of PDT mediated by a single NIR light excitation. A markedly higher PDT efficacy for the dual-photosensitizer system than any single modality has been verified by the enhanced ROS production and in vitro and in vivo results. By combining the inherent multi-imaging properties (up-conversion, CT, and MRI) of UCNPs, an imaging guided therapeutic platform has been built. As the first report of dual-inorganic-photosensitizer PDT agent, our developed system may be of high potential in future NIR light induced PDT application.

Thermally Activated Delayed Fluorescence Organic Dots (TADF Odots) for Time-Resolved and Confocal Fluorescence Imaging in Living Cells and In Vivo

The fluorophores with long-lived fluorescent emission are highly desirable for time-resolved fluorescence imaging (TRFI) in monitoring target fluorescence. By embedding the aggregates of a thermally activated delayed fluorescence (TADF) dye, 2,3,5,6-tetracarbazole-4-cyano-pyridine (CPy), in distearoyl-sn-glycero-3-phosphoethanolamine-poly(ethylene glycol) (DSPE-PEG2000) matrix, CPy-based organic dots (CPy-Odots) with a long fluorescence lifetime of 9.3 μs (in water at ambient condition) and high brightness (with an absolute fluorescence quantum efficiency of 38.3%) are fabricated. CPy-Odots are employed in time-resolved and confocal fluorescence imaging in living Hela cells and in vivo. The green emission from the CPy-Odots is readily differentiated from the cellular autofluorescence background because of their stronger emission intensities and longer lifetimes. Unlike other widely studied DSPE-PEG2000 encapsulated Odots which are always distributed in cytoplasm, CPy-Odots are located mainly in plasma membrane. In addition, the application of CPy-Odots as a bright microangiography agent for TRFI in zebrafish is also demonstrated. Much broader application of CPy-Odots is also prospected after further surface functionalization. Given its simplicity, high fluorescence intensity, and wide availability of TADF materials, the method can be extended to develop more excellent TADF Odots for accomplishing the challenges in future bioimaging applications.