Controlling the Stealth Effect of Nanocarriers through Understanding the Protein Corona

Recent advances and challenges in graphene-based nanocomposite scaffolds for tissue engineering application

Graphene-based nanocomposites have recently attracted increasing attention in tissue engineering because of their extraordinary features. These biocompatible substances, in the presence of an apt microenvironment, can stimulate and sustain the growth and differentiation of stem cells into different lineages. This review discusses the characteristics of graphene and its derivatives, such as their excellent electrical signal transduction, carrier mobility, outstanding mechanical strength with improving surface characteristics, self-lubrication, antiwear properties, enormous specific surface area, and ease of functional group modification. Moreover, safety issues in the application of graphene and its derivatives in terms of biocompatibility, toxicity, and interaction with immune cells are discussed. We also describe the applicability of graphene-based nanocomposites in tissue healing and organ regeneration, particularly in the bone, cartilage, teeth, neurons, heart, skeletal muscle, and skin. The impacts of special textural and structural characteristics of graphene-based nanomaterials on the regeneration of various tissues are highlighted. Finally, the present review gives some hints on future research for the transformation of these exciting materials in clinical studies.

Temperature, concentration, and surface modification influence the cellular uptake and the protein corona of polystyrene nanoparticles

The composition of the protein corona varies depending on several parameters and influences the cellular fate of the nanocarriers. Here, we investigated the influence of three key parameters (surface charge, temperature, and plasma concentration) on the formation and composition of the protein corona of polystyrene nanoparticles and ultimately on the cellular uptake of pre-coated nanoparticles. At a fixed temperature and concentration, the surface charge, and surfactant influence its composition. We observed that the composition of the corona formed at low temperatures (4°C) is different from that formed at physiological temperatures (37°C). At low plasma concentrations (up to 25%), the corona consists of more diverse proteins than at higher concentrations. Finally, we concluded that regardless of the nanoparticle formulation, the degree of uptake by model cancer and endothelial cells of the nanoparticles decreased when pre-coated at increasing temperature or plasma concentration. STATEMENT OF SIGNIFICANCE: Drug delivery through nanocarriers is an increasingly important concept in research and medicine. One problem in the application of nanocarriers in medicine is the protein corona that forms around the nanocarriers when they get in contact with protein-containing fluids. So far, several factors have been identified that influence the composition of the protein corona and thus the biological identity of the particles. However, lacking comparability remains between the studies because different concentrations or temperatures of the protein solutions are used. In this study we demonstrate how the incubation temperature or the concentration of plasma influences the protein corona and thus the cellular uptake of polystyrene nanoparticles.

Protein corona-coated immunomagnetic nanoparticles with enhanced isolation of circulating tumor cells

Immunomagnetic nanoparticles (IMNs) have been widely developed as a detection tool to isolate rare circulating tumor cells (CTCs) from whole blood as a potential method for early cancer diagnosis, metastasis examination, and treatment guidance. However, a spontaneous interaction between nanoparticles and proteins results in the formation of a protein corona that reduces the performance of IMNs when they enter body fluids. To address this issue, the protein corona was precoated onto magnetic nanoparticles (C-MNs), and then their surfaces were conjugated with an immuno-antibody. The adsorption of proteins on C-MNs was decreased 6-fold and non-specific cell binding was reduced 5-fold, compared with magnetic nanoparticles (MNs). Furthermore, the immuno-antibody functionalized C-MNs (IC-MNs) maintained highly specific CTC capture performance when exposed to blood plasma. By using artificial spiked blood samples, IC-MNs exhibited 90.2% CTC isolation efficiency, compared with 60.3% by using IMNs. IC-MNs also successfully captured CTCs with high purity in 24 out of 26 female breast cancer patient blood samples. This work demonstrated that a novel preformed protein corona strategy can provide a useful clinically applicable diagnostic tool.

Squaric Ester-Based Nanogels Induce No Distinct Protein Corona but Entrap Plasma Proteins into their Porous Hydrogel Network

After intravenous administration of nanocarriers, plasma proteins may rapidly adsorb onto their surfaces. This process hampers the prediction of the nanocarriers' pharmacokinetics as it determines their physiological identity in a complex biological environment. Toward clinical translation it is therefore an essential prerequisite to investigate the nanocarriers' interaction with plasma proteins. Here, this work evaluates a highly "PEGylated" squaric ester-based nanogel with inherent prolonged blood circulation properties. After incubation with human blood plasma, the nanogels are isolated by asymmetrical flow-field flow fractionation. Multiangle light scattering measurements confirm the absence of significant size increases as well as aggregation upon plasma incubation. However, proteomic analyses by gel electrophoresis find minor absolute amounts of proteins (3 wt%), whereas label-free liquid chromatography mass spectrometry identify 65 enriched proteins. Interestingly, the relative abundance of these proteins is almost similar to their proportion in pure native plasma. Due to the nanogels' hydrated and porous network morphology, it is concluded that the detected proteins rather result from passive diffusion into the nanogel network than from specific interactions at the plasma particle interface. Consequently, these results do not indicate a classical surface protein corona but rather reflect the highly outer and inner stealth-like behavior of the porous hydrogel network.

Antibody-Incorporated Nanomedicines for Cancer Therapy

Antibody-based cancer therapy, one of the most significant therapeutic strategies, has achieved considerable success and progress over the past decades. Nevertheless, obstacles including limited tumor penetration, short circulation half-lives, undesired immunogenicity, and off-target side effects remain to be overcome for the antibody-based cancer treatment. Owing to the rapid development of nanotechnology, antibody-containing nanomedicines that have been extensively explored to overcome these obstacles have already demonstrated enhanced anticancer efficacy and clinical translation potential. This review intends to offer an overview of the advancements of antibody-incorporated nanoparticulate systems in cancer treatment, together with the nontrivial challenges faced by these next-generation nanomedicines. Diverse strategies of antibody immobilization, formats of antibodies, types of cancer-associated antigens, and anticancer mechanisms of antibody-containing nanomedicines are provided and discussed in this review, with an emphasis on the latest applications. The current limitations and future research directions on antibody-containing nanomedicines are also discussed from different perspectives to provide new insights into the construction of anticancer nanomedicines.

Peptide-decorated nanocarriers penetrating the blood-brain barrier for imaging and therapy of brain diseases

Blood-Brain Barrier (BBB) is one of the most important physiological barriers strictly restricting the substance exchange between blood and brain tissues. While the BBB protects the brain from infections and toxins and maintains brain homeostasis, it is also recognized as the main obstacle to the penetration of therapeutics and imaging agents into the brain. Due to high specificity and affinity, peptides are frequently exploited to decorate nanocarriers across the BBB for diagnosis and/or therapy purposes. However, there are still some challenges that restrict their clinical application, such as stability, safety and immunocompatibility. In this review, we summarize the biological and pathophysiological characteristics of the BBB, strategies across the BBB, and recent progress on peptide decorated nanocarriers for brain diseases diagnosis and therapy. The challenges and opportunities for their translation are also discussed.

An overview on the exploring the interaction of inorganic nanoparticles with microtubules for the advancement of cancer therapeutics

Targeting microtubules (MTs), dynamic and stable proteins in cells, by different ligands have been reported to be a potential strategy to combat cancer cells. Inorganic nanoparticles (NPs) have been widely used as anticancer, antibacterial, and free radical scavenging agents, where the come in contact with biological macromolecules. The interaction between the NPs and biological macromolecules like MTs frequently occurs through different mechanisms. A prerequisite for a detailed exploration of MT structures and functions for biomedical applications like cancer therapy is to investigate profoundly the mechanisms involved in MT-NP interactions, for which the full explanation and characterization of the parameters that are responsible for the formation of a NP-protein complex are crucial. Therefore, in view of the fact that the goal of the rational NP-based future drug design and new therapies is to rely on the information of the structural details and protein-NPs binding mechanisms to manipulate the process of developing new potential drugs, a comprehensive investigation of the essence of the molecular recognition/interaction is also of considerable importance. In the present review, first, the microtubule (MT) structure and its binding sites upon interaction with MT stabilizing agents (MSAs) and MT destabilizing agents (MDAs) are introduced and rationalized. Next, MT targeting in cancer therapy and interaction of NPs with MTs are discussed. Furthermore, interaction of NPs with proteins and the manipulation of protein corona (PC), experimental techniques, and direct interaction of NPs with MTs, are discussed, and finally the challenges and future perspective of the field are introduced. We envision this review can provide useful information on the manipulation of the MT lattice for the progress of cancer nanomedicine.

Chemical and Biophysical Signatures of the Protein Corona in Nanomedicine

An inconvenient hurdle in the practice of nanomedicine is the protein corona, a spontaneous collection of biomolecular species by nanoparticles in living systems. The protein corona is dynamic in composition and may entail improved water suspendability and compromised delivery and targeting to the nanoparticles. How much of this nonspecific protein ensemble is determined by the chemistry of the nanoparticle core and its surface functionalization, and how much of this entity is dictated by the biological environments that vary spatiotemporally in vivo? How do we "live with" and exploit the protein corona without significantly sacrificing the efficacy of nanomedicines in diagnosing and curing human diseases? This article discusses the chemical and biophysical signatures of the protein corona and ponders challenges ahead for the field of nanomedicine.

Reduced cytotoxicity of nanomaterials driven by nano-bio interactions: Case study of single protein coronas enveloping polymersomes

The protein adsorption onto poly(acrylic acid)-block-polystyrene (PAA₂₂-b-PS₁₄₄) polymersomes has been investigated with regard to structural features, thermodynamic aspects and biological consequences. The light scattering measurements revealed the formation of protein coronas enveloping the polymeric capsules regardless of the chemical nature of the biomacromolecules. The experiments were conducted by using lysozyme, immunoglobulin G - IgG and bovine serum albumin - BSA as model proteins due to their differences concerning size and residual surface charge at physiological pH. The protein adsorption was further confirmed by isothermal titration calorimetry, and the experimental data suggest that the phenomenon is mainly governed by hydrogen bonding and van der Waals interactions. The pre-existing protein layer via the pre-incubation in protein environments notably attenuates the cytotoxicity of the nanomaterial compared to the pristine counterparts. This approach can possibly be extended to different types of assemblies when intermolecular interactions are able to induce protein adsorption and the development of protein coronas around nanoparticles. Such fairly simple method may be convenient to engineer safer nanomaterials towards a variety of biomedical applications when the nanotoxicity is an issue. Additionally, the strategy can possibly be used to tailor the surface properties of nanoparticles by adsorbing specific proteins for targeting purposes.

Fabrication strategies and biomedical applications of three-dimensional bacterial cellulose-based scaffolds: A review

Bacterial cellulose (BC), an extracellular polysaccharide, is a versatile biopolymer due to its intrinsic physicochemical properties, broad-spectrum applications, and remarkable achievements in different fields, especially in the biomedical field. Presently, the focus of BC-related research is on the development of scaffolds containing other materials for in-vitro and in-vivo biomedical applications. To this end, prime research objectives concern the biocompatibility of BC and the development of three-dimensional (3D) BC-based scaffolds. This review summarizes the techniques used to develop 3D BC scaffolds and discusses their potential merits and limitations. In addition, we discuss the various biomedical applications of BC-based scaffolds for which the 3D BC matrix confers desired structural and conformational features. Overall, this review provides comprehensive coverage of the idea, requirements, synthetic strategies, and current and prospective applications of 3D BC scaffolds, and thus, should be useful for researchers working with polysaccharides, biopolymers, or composite materials.

Unravelling Heterogeneities in Complement and Antibody Opsonization of Individual Liposomes as a Function of Surface Architecture

Coating nanoparticles with poly(ethylene glycol) (PEG) is widely used to achieve long-circulating properties after infusion. While PEG reduces binding of opsonins to the particle surface, immunogenic anti-PEG side-effects show that PEGylated nanoparticles are not truly "stealth" to surface active proteins. A major obstacle for understanding the complex interplay between opsonins and nanoparticles is the averaging effects of the bulk assays that are typically applied to study protein adsorption to nanoparticles. Here, a microscopy-based method for directly quantifying opsonization at the single nanoparticle level is presented. Various surface coatings are investigated on liposomes, including PEG, and show that opsonization by both antibodies and complement C3b is highly dependent on the surface chemistry. It is further demonstrated that this opsonization is heterogeneous, with opsonized and non-opsonized liposomes co-existing in the same ensemble. Surface coatings modify the percentage of opsonized liposomes and/or opsonin surface density on the liposomes, with strikingly different patterns for antibodies and complement. Thus, this assay provides mechanistic details about opsonization at the single nanoparticle level previously inaccessible to established bulk assays.

Nanomaterials-based photosensitizers and delivery systems for photodynamic cancer therapy

The increasing cancer morbidity and mortality requires the development of high-efficiency and low-toxicity anticancer approaches. In recent years, photodynamic therapy (PDT) has attracted much attention in cancer therapy due to its non-invasive features and low side effects. Photosensitizer (PS) is one of the key factors of PDT, and its successful delivery largely determines the outcome of PDT. Although a few PS molecules have been approved for clinical use, PDT is still limited by the low stability and poor tumor targeting capacity of PSs. Various nanomaterial systems have shown great potentials in improving PDT, such as metal nanoparticles, graphene-based nanomaterials, liposomes, ROS-sensitive nanocarriers and supramolecular nanomaterials. The small molecular PSs can be loaded in functional nanomaterials to enhance the PS stability and tumor targeted delivery, and some functionalized nanomaterials themselves can be directly used as PSs. Herein, we aim to provide a comprehensive understanding of PDT, and summarize the recent progress of nanomaterials-based PSs and delivery systems in anticancer PDT. In addition, the concerns of nanomaterials-based PDT including low tumor targeting capacity, limited light penetration, hypoxia and nonspecific protein corona formation are discussed. The possible solutions to these concerns are also discussed.

A Nanoparticle's Journey to the Tumor: Strategies to Overcome First-Pass Metabolism and Their Limitations

Simple Summary

Traditional cancer therapeutics suffer from off-target toxicity, limiting their effective dose and preventing patients’ tumors from being sufficiently treated by chemotherapeutics alone. Nanomedicine is an emerging class of therapeutics in which a drug is packaged into a nanoparticle that promotes uptake of the drug at a tumor site, shielding it from uptake by peripheral organs and enabling the safe delivery of chemotherapeutics that have poor aqueous solubility, short plasma half-life, narrow therapeutic window, and toxic side effects. Despite the advantages of nanomedicines for cancer, there remains significant challenges to improve uptake at the tumor and prevent premature clearance from the body. In this review, we summarize the effects of first-pass metabolism on a nanoparticle’s journey to a tumor and outline future steps that we believe will improve the efficacy of cancer nanomedicines.

Abstract

Nanomedicines represent the cutting edge of today’s cancer therapeutics. Seminal research decades ago has begun to pay dividends in the clinic, allowing for the delivery of cancer drugs with enhanced systemic circulation while also minimizing off-target toxicity. Despite the advantages of delivering cancer drugs using nanoparticles, micelles, or other nanostructures, only a small fraction of the injected dose reaches the tumor, creating a narrow therapeutic window for an otherwise potent drug. First-pass metabolism of nanoparticles by the reticuloendothelial system (RES) has been identified as a major culprit for the depletion of nanoparticles in circulation before they reach the tumor site. To overcome this, new strategies, materials, and functionalization with stealth polymers have been developed to improve nanoparticle circulation and uptake at the tumor site. This review summarizes the strategies undertaken to evade RES uptake of nanomedicines and improve the passive and active targeting of nanoparticle drugs to solid tumors. We also outline the limitations of current strategies and the future directions we believe will be explored to yield significant benefits to patients and make nanomedicine a promising treatment modality for cancer.

Metallodrugs in cancer nanomedicine

Metal complexes are extensively used for cancer therapy. The multiple variables available for tuning (metal, ligand, and metal-ligand interaction) offer unique opportunities for drug design, and have led to a vast portfolio of metallodrugs that can display a higher diversity of functions and mechanisms of action with respect to pure organic structures. Clinically approved metallodrugs, such as cisplatin, carboplatin and oxaliplatin, are used to treat many types of cancer and play prominent roles in combination regimens, including with immunotherapy. However, metallodrugs generally suffer from poor pharmacokinetics, low levels of target site accumulation, metal-mediated off-target reactivity and development of drug resistance, which can all limit their efficacy and clinical translation. Nanomedicine has arisen as a powerful tool to help overcome these shortcomings. Several nanoformulations have already significantly improved the efficacy and reduced the toxicity of (chemo-)therapeutic drugs, including some promising metallodrug-containing nanomedicines currently in clinical trials. In this critical review, we analyse the opportunities and clinical challenges of metallodrugs, and we assess the advantages and limitations of metallodrug delivery, both from a nanocarrier and from a metal-nano interaction perspective. We describe the latest and most relevant nanomedicine formulations developed for metal complexes, and we discuss how the rational combination of coordination chemistry with nanomedicine technology can assist in promoting the clinical translation of metallodrugs.

Nanoscale Biocompatible Structures Generated from Fluorinated Tripodal Phenylenes on Gold Nanoprisms

Modification of gold substrates with a stable, uniform and ultrathin layer of biocompatible materials is of tremendous interest for the development of bio-devices. We present the fabrication of hybrid systems consisting of triangular prism gold nanoparticles (Au@NTPs) covalently covered with tripod-shaped oligo(p-phenylenes) featuring trifluoromethyl groups. Their synthesis is accomplished using a biphenyl boronic ester as the key compound. Au@NTPs were prepared through a seedless procedure using 3-butenoic acid and benzyldimethyl ammonium chloride, and modified with aminothiol groups. Coverage of this amine-modified gold substrate with a self-assembled monolayer (SAM) of tripod-shaped molecules is carried out in ethanolic solution. The hybrid system avoids up to 70 % of protein corona formation, and allows unspecific attachment for bulky adsorbates, providing an optimal biosensing platform. Chemical composition and morphology are analyzed by transmission electron microscopy (TEM), UV-visible spectroscopy and field emission scanning electron microscopy (FESEM).

Exploring Various Techniques for the Chemical and Biological Synthesis of Polymeric Nanoparticles

Nanoparticles (NPs) have remarkable properties for delivering therapeutic drugs to the body's targeted cells. NPs have shown to be significantly more efficient as drug delivery carriers than micron-sized particles, which are quickly eliminated by the immune system. Biopolymer-based polymeric nanoparticles (PNPs) are colloidal systems composed of either natural or synthetic polymers and can be synthesized by the direct polymerization of monomers (e.g., emulsion polymerization, surfactant-free emulsion polymerization, mini-emulsion polymerization, micro-emulsion polymerization, and microbial polymerization) or by the dispersion of preformed polymers (e.g., nanoprecipitation, emulsification solvent evaporation, emulsification solvent diffusion, and salting-out). The desired characteristics of NPs and their target applications are determining factors in the choice of method used for their production. This review article aims to shed light on the different methods employed for the production of PNPs and to discuss the effect of experimental parameters on the physicochemical properties of PNPs. Thus, this review highlights specific properties of PNPs that can be tailored to be employed as drug carriers, especially in hospitals for point-of-care diagnostics for targeted therapies.

Nano-Bio Interface-Guided Nanoparticle Protein Corona Antigen for Immunoassays and Immunoimaging in a Complex Matrix

Engineered nanoparticles are widely used in biological imaging and drug delivery because of their excellent physical and chemical properties, but almost all the original functions of engineered nanoparticles suffer from a complex matrix. Herein, we proposed a strategy of preparing nanoparticle protein corona antigens (NPCAgs) through exposing a magnetic core silicon shell (Fe₃O₄@SiO₂) fluorescent probe to an antigen protein solution, which could reduce the adsorption of nanoparticles (NPs) with other proteins in serum. In the presence of target anti-BSA IgG, a competitive-type displacement reaction was implemented between NPs@BSA and other proteins by target anti-BSA IgG through the specific antigen-antibody reaction. In addition, secondary structure analysis showed that almost all of the NPCAgs retained their natural conformation, which ensured the function of the NPCAgs, specifically capturing an antibody. Therefore, the NPCAgs showed good performance in immunoassays and immunoimaging, which should shed light on the application in imaging and identification of other nanomaterials.

Nanoparticle-protein corona complex: understanding multiple interactions between environmental factors, corona formation, and biological activity

The surfaces of pristine nanoparticles become rapidly coated by proteins in biological fluids, forming the so-called protein corona. The corona modifies key physicochemical characteristics of nanoparticle surfaces that modulate its biological and pharmacokinetic activity, biodistribution, and safety. In the two decades since the protein corona was identified, the importance of nanoparticles surface properties in regulating biological responses have been recognized. However, there is still a lack of clarity about the relationships between physiological conditions and corona composition over time, and how this controls biological activities/interactions. Here we review recent progress in characterizing the structure and composition of protein corona as a function of biological fluid and time. We summarize the influence of nanoparticle characteristics on protein corona composition and discuss the relevance of protein corona to the biological activity and fate of nanoparticles. The aim is to provide a critical summary of the key factors that affect protein corona formation (e.g. characteristics of nanoparticles and biological environment) and how the corona modulates biological activity, cellular uptake, biodistribution, and drug delivery. In addition to a discussion on the importance of the characterization of protein corona adsorbed on nanoparticle surfaces under conditions that mimic relevant physiological environment, we discuss the unresolved technical issues related to the characterization of nanoparticle-protein corona complexes during their journey in the body. Lastly, the paper offers a perspective on how the existing nanomaterial toxicity data obtained from in vitro studies should be reconsidered in the light of the presence of a protein corona, and how recent advances in fields, such as proteomics and machine learning can be integrated into the quantitative analysis of protein corona components.

The impact of protein corona on the biological behavior of targeting nanomedicines

For successful translation of targeting nanomedicines from bench to bedside, it is vital to address their most common drawbacks namely rapid clearance and off-target accumulation. These complications evidently originate from a phenomenon called "protein corona (PC) formation" around the surface of targeting nanoparticles (NPs) which happens once they encounter the bloodstream and interact with plasma proteins with high collision frequency. This phenomenon endows the targeting nanomedicines with a different biological behavior followed by an unexpected fate, which is usually very different from what we commonly observe in vitro. In addition to the inherent physiochemical properties of NPs, the targeting ligands could also remarkably dictate the amount and type of adsorbed PC. As very limited studies have focused their attention on this particular factor, the present review is tasked to discuss the best simulated environment and latest characterization techniques applied to PC analysis. The effect of PC on the biological behavior of targeting NPs engineered with different targeting moieties is further discussed. Ultimately, the recent progresses in manipulation of nano-bio interfaces to achieve the most favorite therapeutic outcome are highlighted.

Temperature-Responsive Nanoparticles Enable Specific Binding of Apolipoproteins from Human Plasma

Apolipoproteins are an important class of proteins because they provide a so-called stealth effect to nanoparticles. The stealth effect on nanocarriers leads to a reduced unspecific uptake into immune cells and thereby to a prolonged blood circulation time. Herein, a novel strategy to bind apolipoproteins specifically on nanoparticles by adjusting the temperature during their incubation in human plasma is presented. This specific binding, in turn, allows a control of the stealth behavior of the nanoparticles. Nanoparticles with a well-defined poly(N-isopropylacrylamide) shell are prepared, displaying a reversible change of hydrophobicity at a temperature around 32 °C. It is shown by label-free quantitative liquid chromatography-mass spectrometry that the nanoparticles are largely enriched with apolipoprotein J (clusterin) at 25 °C while they are enriched with apolipoprotein A1 and apolipoprotein E at 37 °C. The temperature-dependent protein binding is found to significantly influence the uptake of the nanoparticles by RAW264.7 and HeLa cells. The findings imply that the functionalization of nanoparticles with temperature-responsive materials is a suitable method for imparting stealth properties to nanocarriers for drug-delivery.

Complement Activation Dramatically Accelerates Blood Plasma Fouling On Antifouling Poly(2-hydroxyethyl methacrylate) Brush Surfaces

Non-specific protein adsorption (fouling) triggers a number of deleterious events in the application of biomaterials. Antifouling polymer brushes successfully suppress fouling, however for some coatings an extremely high variability of fouling for different donors remains unexplained. The authors report that in the case of poly(2-hydroxyethyl methacrylate) (poly(HEMA)) this variability is due to the complement system activation that causes massive acceleration in the fouling kinetics of blood plasma. Using plasma from various donors, the fouling kinetics on poly(HEMA) is analyzed and correlated with proteins identified in the deposits on the surface and with the biochemical compositions of the plasma. The presence of complement components in fouling deposits and concentrations of C3a in different plasmas indicate that the alternative complement pathway plays a significant role in the fouling on poly(HEMA) through the "tick-over" mechanism of spontaneous C3 activation. The generated C3b binds to the poly(HEMA) surface and amplifies complement activation locally. Heat-inactivated plasma prevents accelerated fouling kinetics, confirming the central role of complement activation. The results highlight the need to take into account the variability between individuals when assessing interactions between biomaterials and blood plasma, as well as the importance of the mechanistic insight that can be gained from protein identification.

Shape-Dependent Cellular Uptake of Nanostructures Produced from Supramolecular Structure-Directing Unit-Appended Hydrophilic Polymers

Cellular uptake is an important event in drug delivery and other biomedical applications. Amphiphilic polymers produce aggregates of different size and shape depending on the intrinsic structural differences and the packing parameter. Although they have been explored for various biomedical applications with immense interest, the relationship between the shape of the aggregate and cellular uptake has been studied only in limited examples. This work reports two polymers (P1 and P2), both of which contain a hydrophobic supramolecular structure-directing unit (SSDU) at the chain-end of a fluorescence dye-labeled hydrophilic polymer. Depending on the difference in the structure of the single H-bonding functional group (hydrazide or amide) of the SSDU, P1 and P2 produce polymersomes (NS1) and spherical micelles (NS2), respectively. An aged solution of P2 produces cylindrical micelles (NS3). Confocal microscopy studies reveal that the uptake of these nanostructures in HeLa cells greatly depends on the shape of the aggregate. Spherical NS1 and NS2 show appreciable uptake at 1 or 4 h of incubation, whereas NS3 shows negligible uptake. Temperature-dependent cellular uptake studies reveal an energy-dependent endocytosis pathway. Kinetic studies show gradual increase in the cellular uptake with time, and at 24 h the relative uptake ratio (NS1:NS2:NS3) is 1.0:0.2:<0.1, implying the polymersome morphology (NS1) is most efficient for cellular uptake compared to the spherical or cylindrical micelles. The same trend was also noticed for MDA-MB 231 cells. Confocal microscopy studies further reveal cellular internalization and intracellular location of NS1, which showed maximum cellular uptake. As the intrinsic difference in the chemical structure of the two polymers is negligible, the observed difference can be explicitly assigned to their difference in shape.

Core-crosslinked, temperature- and pH-responsive micelles: design, physicochemical characterization, and gene delivery application

Stimuli-responsive block copolymer micelles can provide tailored properties for the efficient delivery of genetic material. In particular, temperature- and pH-responsive materials are of interest, since their physicochemical properties can be easily tailored to meet the requirements for successful gene delivery. Within this study, a stimuli-responsive micelle system for gene delivery was designed based on a diblock copolymer consisting of poly(N,N-diethylacrylamide) (PDEAm) as a temperature-responsive segment combined with poly(aminoethyl acrylamide) (PAEAm) as a pH-responsive, cationic segment. Upon temperature increase, the PDEAm block becomes hydrophobic due to its lower critical solution temperature (LCST), leading to micelle formation. Furthermore, the monomer 2-(pyridin-2-yldisulfanyl)ethyl acrylate (PDSAc) was incorporated into the temperature-responsive PDEAm building block enabling disulfide crosslinking of the formed micelle core to stabilize its structure regardless of temperature and dilution. The cloud points of the PDEAm block and the diblock copolymer were investigated by turbidimetry and fluorescence spectroscopy. The temperature-dependent formation of micelles was analyzed by dynamic light scattering (DLS) and elucidated in detail by an analytical ultracentrifuge (AUC), which provided detailed insights into the solution dynamics between polymers and assembled micelles as a function of temperature. Finally, the micelles were investigated for their applicability as gene delivery vectors by evaluation of cytotoxicity, pDNA binding, and transfection efficiency using HEK293T cells. The investigations showed that core-crosslinking resulted in a 13-fold increase in observed transfection efficiency. Our study presents a comprehensive investigation from polymer synthesis to an in-depth physicochemical characterization and biological application of a crosslinked micelle system including stimuli-responsive behavior.

Role of proteins in the biosynthesis and functioning of metallic nanoparticles

Proteins are known to play important roles in the biosynthesis of metallic nanoparticles (NPs), which are biological substitutes for conventionally used chemical capping and stabilizing agents. When a pristine nanoparticle comes in contact with a biological media or system, a bimolecular layer is formed on the surface of the nanoparticle and is primarily composed of proteins. The role of proteins in the biosynthesis and further uptake, translocation, and bio-recognition of nanoparticles is documented in the literature. But, a complete understanding has not been achieved concerning the mechanism for protein-mediated nanoparticle biosynthesis and the role proteins play in the interaction and recognition of nanoparticles, aiding its uptake and assimilation into the biological system. This review critically evaluates the knowledge and gaps in the protein-mediated biosynthesis of nanoparticles. In particular, we review the role of proteins in multiple facets of metallic nanoparticle biosynthesis, the interaction of proteins with metallic nanoparticles for recognition and interaction with cells, and the toxic potential of protein-nanoparticle complexes when presented to the cell.

Size Dependence Unveiling the Adsorption Interaction of High-Density Lipoprotein Particles with PEGylated Gold Nanoparticles in Biomolecular Corona Formation

Apolipoproteins have been often found to be highly enriched in the serum protein coronas produced on various engineered nanoparticles (NPs), which is also known to greatly influence the behaviors of protein corona NPs in the biological systems. As most of the apolipoproteins in blood are associated with lipoproteins, it suggests the active involvement of lipoproteins in the formation of biomolecular coronas on NPs. However, the interactions of lipoprotein complexes with NPs in the corona formation have been rarely understood. In this study, to obtain insights into the interactions, the formation of biomolecular coronas of high-density lipoproteins (HDLs) on the PEGylated gold NPs (PEG-AuNPs) of various sizes (20-150 nm dia.) was investigated as a model system. The results of this study revealed a noticeable size dependence, which is a drastic increase in the affinity of HDL for larger NPs and thus less-curved NP surfaces. For example, only a few HDLs per NP, which correspond to 5% surface coverage, were found to constitute the hard coronas of HDLs on 20 nm PEG-AuNPs, whereas 73% surface coverage was assessed for larger 150 nm PEG-AuNPs. However, the relative affinities of HDL and apolipoprotein A-1 (APOA1) examined in competition with human serum albumin exhibited the opposite size dependences, which suggests that the adsorption of HDLs is not driven by the constituent protein, APOA1. In fact, the total strength of non-covalent intermolecular interactions between a HDL particle and a NP relies on the physical contact between the two particles, which thus depends on the varying curvatures of spherical NPs in this case. Therefore, it was concluded that it is whole HDL complex that interacts with the spherical PEG-AuNPs in the initial stage of adsorption toward biomolecular coronas, which is unveiled by the distinct size dependence observed in this study.

Thermodynamic Insights into Protein Adsorption on Supramolecular Assemblies of π-Amphiphiles

Nonspecific adsorption of proteins on the surface of nanocarriers plays a critical role in their cellular uptake and other biological functions. This article reports vesicular assemblies of two π-amphiphiles (NDI-1 and NDI-2) and thermodynamic aspects of their interaction with bovine serum albumin (BSA). Both contain a hydrophobic naphthalene-diimide (NDI) core and two oligo-oxyethylene (OE) wedges but differ by the presence of the hydrazide group in NDI-1. NDI-2 exhibits a constricted π-stacking and enthalpy-driven adsorption of BSA. In contrast, NDI-1 exhibits a stronger interaction due to enhanced entropy contribution. It is postulated that a tight packing of NDI chromophores in NDI-2 results in an inadequate space in the corona, leading to the dehydration of OE chains, which contributes to the observed enthalpy-driven binding. On the other hand, due to H-bonding along the direction of π-stacking in NDI-1, an enhanced interchromophoric distance provides more space in the shell, resulting in less dehydration of the OE chains, which results in an entropy gain from the BSA binding-induced release of water from the OE chains. Intercalation of an electron-rich pyrene in the electron-deficient NDI-1 stack further reduces the grafting density of the OE chains, resulting in negligible BSA adsorption, similar to a stealth polymer. A correlation can be seen between the thermodynamic landscape of the protein adsorption and the trend of their lower critical solution temperature (LCST), which follows the order NDI-1 + Py < NDI-1 < NDI-2.

Sub-50 nm ultra-small organic drug nanosuspension prepared by cavi-precipitation and its brain targeting potential

The purpose of this study was to show whether it is possible to prepare sub 100 nm or preferably sub-50 nm drug nanosuspension (NS) of suitable quality for intravenous administration. Furthermore, we have studied how the brain targeting potential of such small size organic NS differs from relatively bigger size NS. Two combination technologies (cavi-precipitation, H96) and a standard high-pressure homogenization (HPH) technology were used to prepare drug NS of different sizes. The cavi-precipitation process generated the smallest AmB NS, i.e., 27 nm compared to 79 nm by H96 technology and 252 nm by standard HPH technology. Dialysis of the nanosuspension in the original dispersion media was found to be the most efficient solvent removal method without negatively affecting particle size. The removal of organic solvent was found to drastically improve the stability of the formulations. The protein adsorption pattern shows that the small size NS particles obtained by the cavi-precipitation process have the potential to circulate longer in the bloodstream and have the potential to be taken up by the blood-brain barrier. The cavi-precipitation process generated ultrafine NS particles, which fulfilled the quality requirements for intravenous administration and offer a potential solution for brain targeting.

Toward the Specificity of Bare Nanomaterial Surfaces for Protein Corona Formation

Aiming at creating smart nanomaterials for biomedical applications, nanotechnology aspires to develop a new generation of nanomaterials with the ability to recognize different biological components in a complex environment. It is common opinion that nanomaterials must be coated with organic or inorganic layers as a mandatory prerequisite for applications in biological systems. Thus, it is the nanomaterial surface coating that predominantly controls the nanomaterial fate in the biological environment. In the last decades, interdisciplinary studies involving not only life sciences, but all branches of scientific research, provided hints for obtaining uncoated inorganic materials able to interact with biological systems with high complexity and selectivity. Herein, the fragmentary literature on the interactions between bare abiotic materials and biological components is reviewed. Moreover, the most relevant examples of selective binding and the conceptualization of the general principles behind recognition mechanisms were provided. Nanoparticle features, such as crystalline facets, density and distribution of surface chemical groups, and surface roughness and topography were encompassed for deepening the comprehension of the general concept of recognition patterns.

The protein corona and its effects on nanoparticle-based drug delivery systems

In most cases, once nanoparticles (NPs) enter the blood, their surface is covered by biological molecules, especially proteins, forming a so-called protein corona (PC). As a result, what the cells of the body "see" is not the NPs as formulated by the chemists, but the PC. In this way, the PC can influence the effects of the NPs and even mask the desired effects of the NP components. While this can argue for trying to inhibit protein-nanomaterial interactions, encapsulating NPs in an endogenous PC may increase their clinical usefulness. In this review, we briefly introduce the concept of the PC, its formation and its effects on the behavior of NPs. We also discuss how to reduce the formation of PCs or exploit them to enhance NP functions. Studying the interactions between proteins and NPs will provide insights into their clinical activity in health and disease. STATEMENT OF SIGNIFICANCE: The formation of protein corona (PC) will affect the operation of nanoparticles (NPs) in vivo. Since there are many proteins in the blood, it is impossible to completely overcome the formation of PC. Therefore, the use of PCs to deliver drug is the best choice. De-opsonins adsorbed on NPs can reduce macrophage phagocytosis and cytotoxicity of NPs, and prolong their circulation in blood. Albumin, apolipoprotein and transferrin are typical de-opsonins. In present review, we mainly discuss how to optimize the delivery of nanoparticles through the formation of albumin corona, transferrin corona and apolipoprotein corona in vivo or in vitro.

Effect of Protein Corona on Mitochondrial Targeting Ability and Cytotoxicity of Triphenylphosphonium Conjugated with Polyglycerol-Functionalized Nanodiamond

Functionalization of nanoparticles (NPs) with targeting moieties has a high potential to advance precision nanomedicine. However, the targeting moieties on a NP surface are known to be masked by a protein corona in biofluids, lowering the targeting efficiency. Although it has been demonstrated at the cellular level, little is known about the influence of the protein corona on the subcellular targeting. Herein, we adopted triphenylphosphonium (TPP) as a mitochondrial targeting moiety and investigated the effects of protein coronas from fetal bovine serum and human plasma on its targeting ability and cytotoxicity. Specifically, we introduced TPP in low (l) and high (h) densities on the surface of nanodiamond (ND) functionalized with polyglycerol (PG). Despite the "corona-free" PG interface, we found that the TPP moiety attracted proteins to form a corona layer with clear linearity between the TPP density and the protein amount. By performing investigations on human cervix epithelium (HeLa) and human lung epithelial carcinoma (A549) cells, we further demonstrated that (1) the protein corona alleviated the cytotoxicity of both ND-PG-TPP-l and -h, (2) a smaller amount of proteins on the surface of ND-PG-TPP-l did not affect its mitochondrial targeting ability, and (3) a larger amount of proteins on the surface of ND-PG-TPP-h diminished its targeting specificity by restricting the NDs inside the endosome and lysosome compartments. Our findings will provide in-depth insights into the design of NPs with active targeting moiety for more precise and safer delivery at the subcellular level.

Fluorescence Liquid Biopsy for Cancer Detection Is Improved by Using Cationic Dendronized Hyperbranched Polymer

(1) Background: Biophysical techniques applied to serum samples characterization could promote the development of new diagnostic tools. Fluorescence spectroscopy has been previously applied to biological samples from cancer patients and differences from healthy individuals were observed. Dendronized hyperbranched polymers (DHP) based on bis(hydroxymethyl)propionic acid (bis-MPA) were developed in our group and their potential biomedical applications explored. (2) Methods: A total of 94 serum samples from diagnosed cancer patients and healthy individuals were studied (20 pancreatic ductal adenocarcinoma, 25 blood donor, 24 ovarian cancer, and 25 benign ovarian cyst samples). (3) Results: Fluorescence spectra of serum samples (fluorescence liquid biopsy, FLB) in the presence and the absence of DHP-bMPA were recorded and two parameters from the signal curves obtained. A secondary parameter, the fluorescence spectrum score (FSscore), was calculated, and the diagnostic model assessed. For pancreatic ductal adenocarcinoma (PDAC) and ovarian cancer, the classification performance was improved when including DHP-bMPA, achieving high values of statistical sensitivity and specificity (over 85% for both pathologies). (4) Conclusions: We have applied FLB as a quick, simple, and minimally invasive promising technique in cancer diagnosis. The classification performance of the diagnostic method was further improved by using DHP-bMPA, which interacted differentially with serum samples from healthy and diseased subjects. These preliminary results set the basis for a larger study and move FLB closer to its clinical application, providing useful information for the oncologist during patient diagnosis.

Fabrication of PεCL-AuNP-BSA core-shell-corona nanoparticles for flexible spatiotemporal drug delivery and SERS detection

Nanoparticles with protein coronae can be used as promising multifunctional platforms for nanomedicine due to the possibility of performing surface functionalization on protein molecules and the achievement of biomedical properties. In this research, nanoparticles (NPs) with poly(ε-caprolactone) (PεCL) cores, gold NP (AuNP) shells and BSA coronae were fabricated by a self-assembly approach. The hydrophobic PεCL cores were used to encapsulate curcumin (CUR), the AuNP shells were decorated with a Raman probe, and the protein molecules in the coronae were functionalized with folic acid (FA). The self-assembly behaviors, drug delivery and the surface-enhanced Raman scattering (SERS) effect of the hybrid NPs were investigated in this research. The sizes of the core-shell-corona NPs (CSCNPs) are dependent on the initial concentrations of PεCL and AuNPs. The CUR in CSCNPs show enzyme-triggered release properties. The added lipase or trypsin can facilitate the CUR release from the hybrid NPs. The functionalization of CSCNPs with FA can significantly improve the internalization of NPs into 4T1 tumor cells due to the overexpressed folate receptors on the cells. In addition, the SERS effect of CSCNPs can be achieved when the AuNPs are decorated with 2-naphthalenethiol. The hybrid CSCNPs can be used as a promising platform for spatiotemporal drug delivery, cell imaging, and theranostics. Based on the same CSCNP platform, flexible functions can be adjusted according to the application needs.

Toolbox of Biodegradable Dendritic (Poly glycerol sulfate)-SS-poly(ester) Micelles for Cancer Treatment: Stability, Drug Release, and Tumor Targeting

In this paper, we present well-defined dPGS-SS-PCL/PLGA/PLA micellar systems demonstrating excellent capabilities as a drug delivery platform in light of high stability and precise in vitro and in vivo drug release combined with active targetability to tumors. These six amphiphilic block copolymers were each targeted in two different molecular weights (8 or 16 kDa) and characterized using ¹H NMR, gel permeation chromatography (GPC), and elemental analysis. The block copolymer micelles showed monodispersed size distributions of 81-187 nm, strong negative charges between -52 and -41 mV, and low critical micelle concentrations (CMCs) of up to 1.13-3.58 mg/L (134-527 nM). The serum stability was determined as 94% after 24 h. The drug-loading efficiency for Sunitinib ranges from 38 to 83% (8-17 wt %). The release was selectively triggered by glutathione (GSH) and lipase, reaching 85% after 5 days, while only 20% leaching was observed under physiological conditions. Both the in vitro and in vivo studies showed sustained release of Sunitinib over 1 week. CCK-8 assays on HeLa lines demonstrated the high cell compatibility (1 mg/mL, 94% cell viability, 48 h) and the high cancer cell toxicity of Sunitinib-loaded micelles (IC₅₀ 2.5 μg/mL). By in vivo fluorescence imaging studies on HT-29 tumor-bearing mice, the targetability of dPGS_7.8-SS-PCL_7.8 enabled substantial accumulation in tumor tissue compared to nonsulfated dPG_3.9-SS-PCL_7.8. As a proof of concept, Sunitinib-loaded dPGS-SS-poly(ester) micelles improved the antitumor efficacy of the chemotherapeutic. A tenfold lower dosage of loaded Sunitinib led to an even higher tumor growth inhibition compared to the free drug, as demonstrated in a HeLa human cervical tumor-bearing mice model. No toxicity for the organism was observed, confirming the good biocompatibility of the system.

The differences of the impact of a lipid and protein corona on the colloidal stability, toxicity, and degradation behavior of iron oxide nanoparticles

AIM

In this study, the influence of a serum albumin (SA) and human plasma (HP) derived protein- and lipid molecule corona on the toxicity and biodegradability of different iron oxide nanoparticles (IONP) was investigated.

METHODS

IONP were synthesized and physicochemically characterized regarding size, charge, and colloidal stability. The adsorbed proteins were quantified and separated by gel electrophoresis. Adsorbed lipids were profiled by ultraperformance liquid chromatography-ESI-tandem mass spectrometry. The biocompatibility was investigated using isolated erythrocytes and a shell-less hen's egg model. The biodegradability was assessed by iron release studies in artificial body fluids.

RESULTS

The adsorption patterns of proteins and lipids varied depending on the surface characteristics of the IONP like charge and hydrophobicity. The biomolecule corona modified IONP displayed favorable colloidal stability and toxicological profile compared to IONP without biomolecule coronas, reducing erythrocyte aggregation and hemolysis in vitro as well as the corresponding effects ex ovo/in vivo. The coronas decreased the degradation speed of all tested IONP compared to bare particles, but, whereas all IONP degraded at the same rate for the SA corona, substantial differences were evident for IONP with HP-derived corona depending on the lipid adsorption profile.

CONCLUSION

In this study the impact of the proteins and lipids in the biomolecule corona on the entire IONP application cycle from the injection process to the degradation was demonstrated.

Zinc Oxide Nanoparticles Protected with Terpenoids as a Substance in Redox Imbalance Normalization in Burns

Preliminary protection of zinc oxide nanoparticles (ZnO NPs) with terpenoids such as betulin, its derivatives, and essential oils components has been proposed to produce gel-like oleophilic and hydrophilic formulations. We studied the properties of gel-like dispersions of ZnO NPs with immobilized terpenoids and their effects on the activity of LDH, GR, G6PDH, restoration of redox balance of co-enzyme pairs NAD+/NADH and NADP+/NADPH, as well as the activity of SOD, catalase, AlDH in erythrocytes in the treatment of burns in rats. Hysteresis loops on the rheograms of studied dispersions characterize their thixotropic properties. ZnO NPs with betulin diphosphate in the water-ethanol medium lead to a 20-fold increase in the hydrodynamic radius at pH 7.3 compared to the initial ZnO NPs, and facilitate the formation of Zn2+ ions and their penetration into the viable epidermis, unlike oleophilic dispersions. All dispersions reduce the healing time by one and a half times compared with the untreated control group, increase the activity of LDH, GR, G6PDH, SOD, catalase, AlDH, and contribute to the normalization of coenzyme balance. Normalization of the redox balance and wound state was more effective using hydrophilic dispersions due to Zn2 + penetration.

Molecular Modeling of Protein Corona Formation and Its Interactions with Nanoparticles and Cell Membranes for Nanomedicine Applications

The conformations and surface properties of nanoparticles have been modified to improve the efficiency of drug delivery. However, when nanoparticles flow through the bloodstream, they interact with various plasma proteins, leading to the formation of protein layers on the nanoparticle surface, called protein corona. Experiments have shown that protein corona modulates nanoparticle size, shape, and surface properties and, thus, influence the aggregation of nanoparticles and their interactions with cell membranes, which can increases or decreases the delivery efficiency. To complement these experimental findings and understand atomic-level phenomena that cannot be captured by experiments, molecular dynamics (MD) simulations have been performed for the past decade. Here, we aim to review the critical role of MD simulations to understand (1) the conformation, binding site, and strength of plasma proteins that are adsorbed onto nanoparticle surfaces, (2) the competitive adsorption and desorption of plasma proteins on nanoparticle surfaces, and (3) the interactions between protein-coated nanoparticles and cell membranes. MD simulations have successfully predicted the competitive binding and conformation of protein corona and its effect on the nanoparticle-nanoparticle and nanoparticle-membrane interactions. In particular, simulations have uncovered the mechanism regarding the competitive adsorption and desorption of plasma proteins, which helps to explain the Vroman effect. Overall, these findings indicate that simulations can now provide predications in excellent agreement with experimental observations as well as atomic-scale insights into protein corona formation and interactions.

Engineering the Interface between Inorganic Nanoparticles and Biological Systems through Ligand Design

Nanoparticles (NPs) provide multipurpose platforms for a wide range of biological applications. These applications are enabled through molecular design of surface coverages, modulating NP interactions with biosystems. In this review, we highlight approaches to functionalize nanoparticles with "small" organic ligands (Mw < 1000), providing insight into how organic synthesis can be used to engineer NPs for nanobiology and nanomedicine.

Activable Multi-Modal Nanoprobes for Imaging Diagnosis and Therapy of Tumors

Malignant tumors have become one of the major causes of human death, but there remains a lack of effective methods for tiny tumor diagnosis, metastasis warning, clinical efficacy prediction, and effective treatment. In this context, localizing tiny tumors via imaging and non-invasively extracting molecular information related to tumor proliferation, invasion, metastasis, and drug resistance from the tumor microenvironment have become the most fundamental tasks faced by cancer researchers. Tumor-associated microenvironmental physiological parameters, such as hypoxia, acidic extracellular pH, protease, reducing conditions, and so forth, have much to do with prognostic indicators for cancer progression, and impact therapeutic administrations. By combining with various novel nanoparticle-based activatable probes, molecular imaging technologies can provide a feasible approach to visualize tumor-associated microenvironment parameters noninvasively and realize accurate treatment of tumors. This review focuses on the recent achievements in the design of “smart” nanomedicine responding to the tumor microenvironment-related features and highlights state-of- the-art technology in tumor imaging diagnosis and therapy.

Effect of Protein Corona on Nanoparticle-Lipid Membrane Binding: The Binding Strength and Dynamics

All-atom molecular dynamics simulations of the 10 nm-sized anionic polystyrene (PS) particle complexed with plasma proteins (human serum albumin, immunoglobulin gamma-1 chain-C, and apolipoprotein A-I) adsorbed onto lipid bilayers [asymmetrically composed of extracellular (zwitterionic) and cytosolic (anionic) leaflets] are performed. Free energies calculated from umbrella sampling simulations show that proteins on the particle more weakly bind to the zwitterionic leaflet than do bare particles, in agreement with experiments showing the suppression of the particle-bilayer binding by protein corona. Proteins on the particle interact more strongly with the anionic leaflet than with the zwitterionic leaflet because of charge interactions between cationic protein residues and anionic lipid headgroups, to an extent dependent on various plasma proteins. In particular, hydrogen bonds between proteins and zwitterionic leaflets restrict the motion of lipids and thus reduce the lateral dynamics of bilayers, while the tight binding between proteins and anionic leaflets disrupts the helical structure of proteins and disorders lipids, leading to an increase in the lateral dynamics of bilayers. These findings help explain the experimental observation regarding the fact that the bilayer dynamics decreases when interacting with protein corona and suggest that the effect of protein corona on the binding strength and bilayer dynamics depends on protein types and bilayer charges.

Antifouling Strategies of Nanoparticles for Diagnostic and Therapeutic Application: A Systematic Review of the Literature

Nanoparticles (NPs) are promising platforms for the development of diagnostic and therapeutic tools. One of the main hurdle to their medical application and translation into the clinic is the fact that they accumulate in the spleen and liver due to opsonization and scavenging by the mononuclear phagocyte system. The “protein corona” controls the fate of NPs in vivo and becomes the interface with cells, influencing their physiological response like cellular uptake and targeting efficiency. For these reasons, the surface properties play a pivotal role in fouling and antifouling behavior of particles. Therefore, surface engineering of the nanocarriers is an extremely important issue for the design of useful diagnostic and therapeutic systems. In recent decades, a huge number of studies have proposed and developed different strategies to improve antifouling features and produce NPs as safe and performing as possible. However, it is not always easy to compare the various approaches and understand their advantages and disadvantages in terms of interaction with biological systems. Here, we propose a systematic study of literature with the aim of summarizing current knowledge on promising antifouling coatings to render NPs more biocompatible and performing for diagnostic and therapeutic purposes. Thirty-nine studies from 2009 were included and investigated. Our findings have shown that two main classes of non-fouling materials (i.e., pegylated and zwitterionic) are associated with NPs and their applications are discussed here highlighting pitfalls and challenges to develop biocompatible tools for diagnostic and therapeutic uses. In conclusion, although the complexity of biofouling strategies and the field is still young, the collective data selected in this review indicate that a careful tuning of surface moieties is a pivotal step to lead NPs through their future clinical applications.

Wound Healing Composite Materials of Bacterial Cellulose and Zinc Oxide Nanoparticles with Immobilized Betulin Diphosphate

A design of new nanocomposites of bacterial cellulose (BC) and betulin diphosphate (BDP) pre-impregnated into the surface of zinc oxide nanoparticles (ZnO NPs) for the production of wound dressings is proposed. The sizes of crystalline BC and ZnO NPs (5-25%) corresponded to 5-6 nm and 10-18 nm, respectively (powder X-ray diffractometry (PXRD), Fourier-infrared (FTIR), ultraviolet (UV), atomic absorption (AAS) and photoluminescence (PL) spectroscopies). The biological activity of the wound dressings "BC-ZnO NPs-BDP" was investigated in rats using a burn wound model. Morpho-histological studies have shown that more intensive healing was observed during treatment with hydrophilic nanocomposites than the oleophilic standard (ZnO NPs-BDP oleogel; p < 0.001). Treatment by both hydrophilic and lipophilic agents led to increases in antioxidant enzyme activity (superoxide dismutase (SOD), catalase) in erythrocytes and decreases in the malondialdehyde (MDA) concentration by 7, 10 and 21 days (p < 0.001). The microcirculation index was restored on the 3rd day after burn under treatment with BC-ZnO NPs-BDP wound dressings. The results of effective wound healing with BC-ZnO NPs-BDP nanocomposites can be explained by the synergistic effect of all nanocomposite components, which regulate oxygenation and microcirculation, reducing hypoxia and oxidative stress in a burn wound.

In vivo protein corona on nanoparticles: does the control of all material parameters orient the biological behavior?

Nanomaterials have a huge potential in research fields from nanomedicine to medical devices. However, surface modifications of nanoparticles (NPs) and thus of their physicochemical properties failed to predict their biological behavior. This requires investigating the "missing link" at the nano-bio interface. The protein corona (PC), the set of proteins binding to the NPs surface, plays a critical role in particle recognition by the innate immune system. Still, in vitro incubation offers a limited understanding of biological interactions and fails to explain the in vivo fate. To date, several reports explained the impact of PC in vitro but its applications in the clinical field have been very limited. Furthermore, PC is often considered as a biological barrier reducing the targeting efficiency of nano vehicles. But the protein binding can actually be controlled by altering PC both in vitro and in vivo. Analyzing PC in vivo could accordingly provide a deep understanding of its biological effect and speed up the transfer to clinical applications. This review demonstrates the need for clarifications on the effect of PC in vivo and the control of its behavior by changing its physicochemical properties. It unfolds the recent in vivo developments to understand mechanisms and challenges at the nano-bio interface. Finally, it reports recent advances in the in vivo PC to overcome and control the limitations of the in vitro PC by employing PC as a boosting resource to prolong the NPs half-life, to improve their formulations and thereby to increase its use for biomedical applications.

Evidence of protein coronas around soft nanoparticles regardless of the chemical nature of the outer surface: structural features and biological consequences

The formation of biomolecular coronas around nanoparticles as soon as they come in contact with biological media is nowadays well accepted. The self-developed biological outer surfaces can affect the targeting capability of the colloidal carriers as well as their cytotoxicity and cellular uptake behavior. In this framework, we explored the structural features and biological consequences of protein coronas around block copolymer assemblies consisting of a common pH-responsive core made by poly[2-(diisopropylamino) ethyl methacrylate] (PDPA) and hydrophilic shells of different chemical natures: zwitterionic poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) or highly hydrophilic poly(ethylene oxide) (PEO) and poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA). We demonstrated the presence of ∼50 nm protein coronas around the nanoparticles regardless of the chemical nature of the polymeric shells. The thickness is understood as the sum of the soft and hard layers and it is the actual interface seen by the cells. Although the soft corona composition is difficult to determine because the proteins are loosely bound to the outer surface of the assemblies, the tightly bound proteins (hard corona) could be identified and quantified. The compositional analysis of the hard corona demonstrated that human serum albumin (HSA), immunoglobulin G (IgG) and fibrinogen are the main components of the protein coronas, and serotransferrin is present particularly in the protein corona of the zwitterionic-stabilized assemblies. The protein coronas substantially reduce the cellular uptake of the colloidal particles due to their increased size and the presence of HSA which is known to reduce nanoparticle-cell adhesion. On the other hand, their existence also reduces the levels of cytotoxicity of the polymeric assemblies, highlighting that protein coronas should not be always understood as artifacts that need to be eliminated due to their positive outputs.

Optimizing pDNA Lipo-polyplexes: A Balancing Act between Stability and Cargo Release

When optimizing nanocarriers, structural motifs that are beneficial for the respective type of cargo need to be identified. Here, succinoyl tetraethylene pentamine (Stp)-based lipo-oligoaminoamides (OAAs) were optimized for the delivery of plasmid DNA (pDNA). Structural variations comprised saturated fatty acids with chain lengths between C2 and C18 and terminal cysteines as units promoting nanoparticle stabilization, histidines for endosomal buffering, and disulfide building blocks for redox-sensitive release. Biophysical and tumor cell culture screening established clear-cut relationships between lipo-OAAs and characteristics of the formed pDNA complexes. Based on the optimized alternating Stp-histidine backbones, lipo-OAAs containing fatty acids with chain lengths around C6 to C10 displayed maximum gene transfer with around 500-fold higher gene expression than that of C18 lipo-OAA analogues. Promising lipo-OAAs, however, showed only moderate in vivo efficiency. In vitro testing in 90% full serum, revealing considerable inhibition of lytic and gene-transfer activity, was found as a new screening model predictive for intravenous applications in vivo.

Black Phosphorus Nanosheets Induced Oxidative Stress In Vitro and Targeted Photo-thermal Antitumor Therapy

Black phosphorus (BP) nanosheets with excellent features have been broadly employed for cancer therapy. BPs in blood were known to form BP nanomaterial-corona complexes, yet not explored their biological effects. In this study, BPs as delivery vehicles loaded with doxorubicin (DOX) (BP-DOX) by electrostatic interaction had been successfully prepared for photo-thermal/chemotherapy with a tumor inhibition rate of 81.47% more than the rates of BPs (69.50%) and free DOX (51.91%) in the Hela-bearing mice model by a pH/photo-responsive controlled drug release property. Then, in vivo experiments demonstrated that the treatment of healthy mice with BPs led to mild inflammation in the body and oxidative stress in the liver and lung which caused cell apoptosis. In vitro studies further showed that oxidative stress and metabolic disorders could be induced by BPs in A549, HepG2, Beas-2B, and LO2 cells. Lastly, the RGD peptide-conjugated red blood cell (RBC) membrane-coated BPs (RGD-RBC@BP) was prepared by lipid insertion and co-ultrasound methods for efficient photo-thermal therapy (PTT) cancer via a tumor-targeted strategy. RGD-RBC@BP showed positive biocompatibility, photo-thermal properties, and increased cellular uptake by Hela cells benefited by the long circulation property of RBC and RGD peptides. Pharmacokinetics and bio-distribution study of RGD-RBC@BP were found to prolong circulation time and tended to accumulate in the tumors, which overexpression of ανβ3 integrin rather than livers after intravenous injection 24 h in vivo. After 808 nm laser irradiation, RGD-RBC@BP nanoparticles exhibited a better PTT than PEGylated BPs (BP-PEG). The active-targeting strategy of biomimetic nanomaterials based on the tumor microenvironment have been proved to have favorable biological prospects in cancer PTT.

Effect of Core-Crosslinking on Protein Corona Formation on Polymeric Micelles

Most nanomaterials acquire a protein corona upon contact with biological fluids. The magnitude of this effect is strongly dependent both on surface and structure of the nanoparticle. To define the contribution of the internal nanoparticle structure, protein corona formation of block copolymer micelles with poly(N-2-hydroxypropylmethacrylamide) (pHPMA) as hydrophilic shell, which are crosslinked-or not-in the hydrophobic core is comparatively analyzed. Both types of micelles are incubated with human blood plasma and separated by asymmetrical flow field-flow fractionation (AF4). Their size is determined by dynamic light scattering and proteins within the micellar fraction are characterized by gel electrophoresis and quantified by liquid chromatography-high-resolution mass spectrometry-based label-free quantitative proteomics. The analyses reveal only very low amounts of plasma proteins associated with the micelles. Notably, no significant enrichment of plasma proteins is detectable for core-crosslinked micelles, while noncrosslinked micelles show a significant enrichment of plasma proteins, indicative of protein corona formation. The results indicate that preventing the reorganization of micelles (equilibrium with unimers) by core-crosslinking is crucial to reduce the interaction with plasma proteins.

Disentangling Biomolecular Corona Interactions With Cell Receptors and Implications for Targeting of Nanomedicines

Nanoparticles are promising tools for nanomedicine in a wide array of therapeutic and diagnostic applications. Yet, despite the advances in the biomedical applications of nanomaterials, relatively few nanomedicines made it to the clinics. The formation of the biomolecular corona on the surface of nanoparticles has been known as one of the challenges toward successful targeting of nanomedicines. This adsorbed protein layer can mask targeting moieties and creates a new biological identity that critically affects the subsequent biological interactions of nanomedicines with cells. Extensive studies have been directed toward understanding the characteristics of this layer of biomolecules and its implications for nanomedicine outcomes at cell and organism levels, yet several aspects are still poorly understood. One aspect that still requires further insights is how the biomolecular corona interacts with and is “read” by the cellular machinery. Within this context, this review is focused on the current understanding of the interactions of the biomolecular corona with cell receptors. First, we address the importance and the role of receptors in the uptake of nanoparticles. Second, we discuss the recent advances and techniques in characterizing and identifying biomolecular corona-receptor interactions. Additionally, we present how we can exploit the knowledge of corona-cell receptor interactions to discover novel receptors for targeting of nanocarriers. Finally, we conclude this review with an outlook on possible future perspectives in the field. A better understanding of the first interactions of nanomaterials with cells, and -in particular -the receptors interacting with the biomolecular corona and involved in nanoparticle uptake, will help for the successful design of nanomedicines for targeted delivery.