Chirality-Dependent Second-Order Nonlinear Optical Effect in 1D Organic-Inorganic Hybrid Perovskite Bulk Single Crystal

0D chiral hybrid indium(III) halides for second harmonic generation

Chiral metal halides have shown great potential for application in next generation nonlinear optical (NLO) devices owing to their intrinsic non-centrosymmetry. However, the structures and properties of chiral hybrid indium halides have been rarely reported, especially when it comes to second-harmonic generation (SHG) in NLO. In this work, we have synthesized a pair of new zero-dimensional (0D) chiral hybrid indium halides, (R-MPEA)₆InCl₉ and (S-MPEA)₆InCl₉, and studied their NLO properties. The as-prepared chiral hybrid indium halides crystallize in non-centrosymmetric P3₂21 and P3₁21 space groups, respectively. NLO studies show that 0D chiral hybrid indium halide crystals exhibit strong SHG responses with high polarization ratio and high laser damage threshold (LDT). This work enriches the family of chiral hybrid metal halide materials and offers a feasible strategy for the targeted design and synthesis of intrinsically non-centrosymmetric metal halide materials for NLO applications.

Methylpiperazine based 0D chiral hybrid lead halides for second harmonic generation

Hybrid organic-inorganic metal halides (HOMHs) have recently attracted broad research interest for their structural tunability and remarkable optoelectronic properties. Among them, chiral HOMHs have demonstrated promising applications in second-order nonlinear optics (NLO) on account of their inherent noncentrosymmetric structures. Herein, we synthesized two new chiral HOMHs, (S-/R-2-C₅H₁₄N₂)₂PbI₆, based on S-/R-2-methylpiperazine chiral amines. They feature a band gap close to 2.9 eV with high phase purity as well as environmental and thermal stability. The induction of the chiral optical properties of (S-/R-2-C₅H₁₄N₂)₂PbI₆ by chiral organic cations was verified by circular dichroism (CD) spectroscopy. Moreover, the resulted HOMHs materials demonstrate a strong second harmonic generation response with a large laser damage threshold (∼2.97 mJ cm^-2), showing promising applications in NLO photonic devices.

Contactless Manipulation of Write-Read-Erase Data Storage in Diarylethene Ferroelectric Crystals

The optical manipulation of polarization has gained widespread attention because it offers a promising route to new contactless memories and switches. However, the current research basically focuses on the photocontrol of data storage rather than data reading, which cannot realize the whole process of contactless write-read-erase data storage. Here, we present a pair of enantiomorphic diarylethene derivative ferroelectric crystals, showing a light-driven phase transition triggered by photoisomerization between the open and closed forms. Under the visible light, they exhibit a binary-domain state in the open form with white color and the band gap of 3.26 eV, while they show a single-domain state in the closed form with blue color and the band gap of 1.68 eV after UV irradiation of 254/365 nm. In addition to writing and erasing ferroelectric domains with light, we can also use light to read their color to determine the polarization state of domains. Moreover, diarylethene derivatives have better thermal stability, higher photoexcited conversion efficiency, and larger changes of the absorption wavelength between two isomers than those in salicylideneaniline derivatives. This work not only discovers the first diarylethene-based ferroelectric crystals but also successfully realizes completely contactless manipulation of write-read-erase data storage in the organic ferroelectric semiconductors.

Domain memory effect in the organic ferroics

Shape memory alloys have been used extensively in actuators, couplings, medical guide wires, and smart devices, because of their unique shape memory effect and superelasticity triggered by the reversible martensitic phase transformations. For ferroic materials, however, almost no memory effects have been found for their ferroic domains after reversible phase transformations. Here, we present a pair of single-component organic enantiomorphic ferroelectric/ferroelastic crystals, (R)- and (S)-N-3,5-di-tert-butylsalicylidene-1-(1-naphthyl)ethylamine SA-NPh-(R) and SA-NPh-(S). It is notable that not only can their ferroic domain patterns disappear and reappear during reversible thermodynamic phase transformations, but they can also disappear and reappear during reversible light-driven phase transformations induced by enol-keto photoisomerization, both of which are from P1 to P21 polar space groups. Most importantly, the domain patterns are exactly the same in the initial and final states, demonstrating the existence of a memory effect for the ferroic domains in SA-NPh-(R) and SA-NPh-(S). As far as we are aware, the domain memory effect triggered by both thermodynamic and light-driven ferroelectric/ferroelastic phase transformations remains unexplored in ferroic materials. Thermal and optical control of domain memory effect would open up a fresh research field for smart ferroic materials.

Spin-orbit coupling and the fine optical structure of chiral helical polymers

With the discovery of the chiral-induced spin selectivity (CISS) effect, it has been recognized that spin and structural spin-orbit coupling (SOC) play important roles in the electro-optical properties of chiral materials. We redefine the spin-dependent current and magnetic moment operators to include chiral-induced SOC in a helical polymer and deduce optical absorption and circular dichroism (CD) formulae. The fine structure in the optical spectra is calculated for a helical polymer described with the tight-binding model. The effects of both the electron orbit and spin on the optical absorption and CD are discussed. Our investigations demonstrate that the synergy between the electron orbit and spin will contribute to higher-sensitivity circularly polarized light (CPL) detection.

Chiral Hybrid Copper(I) Halides for High Efficiency Second Harmonic Generation with a Broadband Transparency Window

Chiral hybrid organic-inorganic metal halides (HOMHs) with intrinsic noncentrosymmetry have shown great promise for applications in second-order nonlinear optics (NLO). However, established chiral HOMHs often suffer from their relatively small band gaps, which lead to negative impacts on transparent window and laser-induced damage thresholds (LDT). Here, we have synthesized two chiral HOMHs based on Cu^I halides, namely (R-/S-MBA)CuBr₂ , which feature well-balanced NLO performances with a highly efficient SHG response, outstanding optical transparency, and high LDT. The effective second-order NLO coefficient of (R-MBA)CuBr₂ has been determined to be ≈24.7 pm V^-1 , which is two orders of magnitude higher than that of their Cu^II counterparts. This work shows the promising potential of Cu^I -based chiral HOMHs for nonlinear photonic applications in wide wavelength regions.

Two-step nonlinear optical switch in a hydrogen-bonded perovskite-type crystal

Switchable nonlinear optical (NLO) materials have aroused broad interest on account of their captivating optical and electronic properties. We demonstrate a novel perovskite-type crystal with exceptional hydrogen bond interactions that are associated with the onset of reorientational motions of organic cations and thus induce the occurrence of two successive phase transitions to be a two-step NLO switch. This finding affords an alternative approach for the design and assembly of switchable NLO materials.

Regulating Optical Activity and Anisotropic Second-Harmonic Generation in Zero-Dimensional Hybrid Copper Halides

Structural engineering permits the introduction of chirality into organic-inorganic hybrid metal halides (HMHs), which creates a promising and exclusive material for applications in various optoelectronics. However, the optical activity regulation of chiral HMHs remains largely unexplored. In this work, we have synthesized two pairs of lead-free chiral HMHs with a zero-dimensional tetrahedral arrangement, i.e., (R- and S-1-(1-naphthyl)ethylammonium)₂CuCl₄ and (R- and S-1-(2-naphthyl)ethylammonium)₂CuCl₄. The magnitude of optical activity in these HMHs can be efficiently modulated as a result of the different magnetic transition dipole moments. Furthermore, these HMHs exhibited effective second-harmonic generation (SHG) and distinct SHG-circular dichroism (CD), with (R-1-(1-naphthyl)ethylammonium)₂CuCl₄ having an anisotropy factor (g_SHG-CD) of up to 0.41. This work not only provides insights into regulating the optical activity and anisotropic SHG effect of lead-free chiral HMHs but also confirms the feasibility of SHG-CD spectroscopy as a promising tool for characterizing the intrinsic optical activity of chiral materials.

Transfer Printing of Perovskite Whispering Gallery Mode Laser Cavities by Thermal Release Tape

The outstanding optoelectrical properties and high-quality factor of whispering gallery mode perovskite nanocavities make it attractive for applications in small lasers. However, efforts to make lasers with better performance have been hampered by the lack of efficient methods for the synthesis and transfer of perovskite nanocavities on desired substrate at quality required for applications. Here, we report transfer printing of perovskite nanocavities grown by chemical vapor deposition from mica substrate onto SiO₂ substrate. Transferred perovskite nanocavity has an RMS roughness of ~ 1.2 nm and no thermal degradation in thermal release process. We further use femtosecond laser to excite a transferred perovskite nanocavity and measures its quality factor as high as 2580 and a lasing threshold of 27.89 μJ/cm² which is almost unchanged as compared with pristine perovskite nanocavities. This method represents a significant step toward the realization of perovskite nanolasers with smaller sizes and better heat management as well as application in optoelectronic devices.

A novel 2-(aminomethyl)pyridineH2PO4 crystal with second-order nonlinear optical performance

Single-crystal structure diagram and SHG response of (2-Ampy)H2PO4 crystal.

Spin selectivity in chiral metal-halide semiconductors

Controlling the spin states of freedom represents a significant challenge for the next-generation optoelectronic and spintronic devices. Chiral metal-halide semiconductors (MHS) have recently emerged as an important class of materials for spin-dependent photonic and electronic applications. In this Minireview, we first discussed the chemical and structural diversity of chiral MHS, highlighting the chirality formation mechanism. We then provided our current understanding on the spin-sensitive photophysical and transport process with a focus on how chirality enables the spin selectivity in chiral MHS. We summarized recent progress on the experimental demonstration of spin control in various photonic and spintronic devices. Finally, we discussed ongoing challenges and opportunities associated with chiral MHS.