Advances in chiral separation using capillary electromigration techniques

Chiral CE-MS

This review article addresses the developments and applications of capillary electromigration methods coupled on-line with MS for chiral analysis. The multiple enantiomeric applications of this hyphenated technology are covered including chiral analysis of drugs, food compounds, pesticides, natural metabolites, etc. in different matrices such as plasma, urine, medicines, foods, etc. This work intends to provide an updated overview (including works published till September 2009) on the principal chiral applications carried out by CZE-MS, CEC-MS and MEKC-MS, discussing their main advantages and drawbacks in all their different areas of application as well as their foreseeable development in the not too distant future.

A high-throughput multivariate optimization for the simultaneous enantioseparation and detection of barbiturates in micellar electrokinetic chromatography-mass spectrometry

The R- and S-configurations of barbiturates display differences in potency and biological activity. In this study, multivariate micellar electrokinetic chromatography-mass spectrometry (MEKC-MS) approach for the simultaneous analysis of three chiral barbiturates (mephobarbital, pentobarbital, and secobarbital) is developed using a polymeric chiral surfactant. After screening 11 amino acid polymeric surfactants, polysodium N-undecenoxycarbonyl-L-isoleucinate (poly-L-SUCIL) was found to be the best chiral selector. The multivariate central composite design (CCD) is used to optimize the chiral resolution, decrease the total analysis time, and improve the ESI-MS signal-to-noise (S/N) ratio. In the preliminary set of experiments, the ranges of the factors investigated in the multivariate approaches are determined. Next, the CCD design is conducted to determine the best overall chiral resolution with shortest possible run times. This optimization resulted in simultaneous enantioseparation in less than 32 min of all three barbiturates with 3-5 fold higher sensitivity by MS compared to UV detection. The adequacy of the multivariate model is validated by three replicate experimental runs at the predicted optimum conditions. The predicted results of MEKC-MS are found to be in good agreement with the experimental data for migration times, resolution, and S/N ratio. The optimized method provided good results in terms of linearity and recovery values of chiral barbiturates spiked in human serum after solid-phase extraction procedure.

Effect of the nature of the single-isomer anionic CD and the BGE composition on the enantiomeric separation of beta-blockers in NACE

The separation of ten beta-blockers has been investigated in NACE systems using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD (HDMS-beta-CD) and heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-CD (HDAS-beta-CD). The influence on enantioresolution, mobility difference and selectivity of the nature of both anionic CD and BGE anion as well as their concentrations were studied by means of a multivariate approach. A D-optimal design with 25 experimental points was applied. For all studied analytes, the enantiomeric resolution was shown to be significantly influenced by both CD nature and concentration. Except for two compounds, HDAS-beta-CD was found to give higher enantioresolution values than HDMS-beta-CD. The best enantioseparation for all compounds was achieved in the presence of a high chiral selector concentration and for most of them at a low BGE anion concentration. For each investigated compound, operating conditions leading to the best enantiomeric resolution were deduced. A generic NACE system was then recommended, namely 10 mM ammonium acetate and 40 mM HDAS-beta-CD in methanol acidified with 0.75 M formic acid. This generic system was able to completely resolve the enantiomers of all beta-blockers, with a R(s) value of at least 4. Finally, the optimal conditions obtained modelling resolution, mobility difference and selectivity were compared.

Advanced CE for chiral analysis of drugs, metabolites, and biomarkers in biological samples

An analysis of recent trends indicates that CE can show real advantages over chromatographic methods in ultratrace enantioselective determination of biologically active compounds in complex biological matrices. It is due to high separation efficiency and many applicable in-capillary electromigration effects in CE (countercurrent migration, stacking effects) enhancing significantly (enantio)separability and enabling effective sample preparation (preconcentration, purification, analyte derivatization). Other possible on-line combinations of CE, such as column coupled CE-CE techniques and implementation of nonelectrophoretic techniques (extraction, membrane filtration, flow injection) into CE, offer additional approaches for highly effective sample preparation and separation. CE matured to a highly flexible and compatible technique enabling its hyphenation with powerful detection systems allowing extremely sensitive detection (e.g. LIF) and/or structural characterization of analytes (e.g. MS). Within the last decade, more as well as less conventional analytical on-line approaches have been effectively utilized in this field and their practical potentialities are demonstrated on many new application examples in this article. Here, three basic areas of (enantioselective) drug bioanalysis are highlighted and supported by a brief theoretical description of each individual approach in a compact review structure (to create integrated view on the topic), including (i) progressive enantioseparation approaches and new enantioselective agents, (ii) in-capillary sample preparation (preconcentration, purification, derivatization), and (iii) detection possibilities related to enhanced sensitivity and structural characterization.

Chiral analysis of anti-acquired immunodeficiency syndrome drug, 9-(R)-[2-(phosphonomethoxy)propyl]adenine (tenofovir), and related antiviral acyclic nucleoside phosphonates by CE using beta-CD as chiral selector

A new CZE method has been developed for chiral analysis of an important anti-acquired immunodeficiency syndrome drug, 9-(R)-[2-(phosphonomethoxy)propyl]adenine ((R)-PMPA, tenofovir), and six related antiviral acyclic nucleoside phosphonates using beta-CD as a chiral selector. The influence of the composition, concentration and pH of the BGE and the type and concentration of chiral selector on enantiomer resolution was investigated. Complete separations of (R,S)-enantiomers of PMPA with very good resolution (R(s)=1.50-3.64) were achieved within a short time (4-15 min) in 20-50 mM sodium borate or sodium tetraborate BGEs, pH 10.0, at 20 mg/mL concentration of beta-CD. (R,S)-enantiomers of five similar PMPA analogs containing purine bases (adenine, diaminopurine or guanine) and hydroxyl or fluor substituents at C3 carbon atom of propyl chain were baseline separated within 10-17 min in 35 mM sodium tetraborate BGE, pH 10.0, at 20 mg/mL beta-CD concentration. Another important antiviral used by acquired immunodeficiency syndrome patients, derived from pyrimidine base cytosine, 1-(S)-[3-hydroxy-2-(phosphonomethoxy)propyl]cytosine (cidofovir), and the (R)-enantiomer of this drug were successfully separated in 50 mM sodium tetraborate BGE, pH 10.5, at 20 mg/mL beta-CD concentration within 45 min. Using the UV-absorption detection at 206 nm, the concentration detection limits of the analyzed acyclic nucleoside phosphonates were determined in the submicromolar to micromolar range (0.15-2.51 microg/mL level).

Chiral separations by CE employing CDs

This paper summarizes the history of chiral separations done by using electromigration methods with CDs. Several enantioresolution mechanisms and a wide number of chiral selectors have been applied to the separation of optical isomers by CE. Among them inclusion-complexation with CDs or their derivatives played a very important role in CE. Since the beginning our group was involved in studying method optimization for enantiomer resolution by using these chiral selectors. One of our publications was the basis for further development in the field, at least for us. New chiral selectors, development of theory, new methodological approaches and a wide number of practical applications are the main results achieved in the last almost 25 years using CE as an enantioseparative technique.

Enantioselective in-line and off-line CE methods for the kinetic study on cimetidine and its chiral metabolites with reference to flavin-containing monooxygenase genetic isoforms

An in-line screening and an off-line chiral CE method were developed to determine the stereoselectivity of flavin-containing monooxygenase (FMO) isoforms using cimetidine (CIM) as a substrate. The S-oxygenation of CIM was investigated using achiral chemical oxidants and (human supersomes) enzymatic metabolism procedures. In the off-line setup, the chiral selector sulfobutylether-beta-CD was chosen to separate the CIM S-oxide (CSO) metabolites. The electrophoretic migration order of CSO was confirmed to be (+) before (-) through the use of single enantiomers obtained by preparative chromatography. For the electrophoretically mediated microanalysis method, the in-line enzymatic reaction was performed in 100 mM phosphate reaction buffer (pH 8.3), whereas 50 mM phosphate buffer with 30 mM chiral selector (pH 2.5) was used as a BGE. During the screening of FMO isoenzymes by the electrophoretically mediated microanalysis method, formation of the new chiral center on the CIM sulfur was found to be stereoselective. FMO1 produces more (-)-CSO-enantiomer, while FMO3 generates mainly (+)-CSO-enantiomer. On the other hand, FMO5 shows no activity. The kinetic constants of FMO1 and FMO3 were measured by the off-line method. A K(m)=4.31 mM for the formation of the (+)-CSO-enantiomer and a K(m)=4.56 mM for the (-)-CSO-enantiomer are reported for the first time for FMO1.

Application of Click-chemistry-based perphenylcarbamated beta-CD chiral stationary phase in CEC

A novel chiral stationary phase (CSP) was prepared by anchoring mono-6-azido-6-deoxyperphenylcarbamated beta-CD onto omega-alkynyl functionalized silica (5 microm) via organic soluble Cu(I)-catalyzed Click chemistry. The obtained CSP was thereafter packed into fused-silica capillary (100 microm id) with an effective length of 9 cm and tested in aqueous CEC to separate a series of racemic aryl alcohols. High separation factors with good resolution were achieved using the current novel CSP. Some pharmaceutical compounds could also be well resolved on this newly derived CSP. The analytical results demonstrate that Click-chemistry-based perphenylcarbamated CSP affords high stability in high electric field and depicts excellent enantioseparation in CEC. The effects of pH value, buffer concentration, applied voltage, concentration of organic modifier and analyte structure on the enantioseparation are also discussed.

Enantioseparation of nicotine alkaloids in cigarettes by CE using sulfated beta-CD as a chiral selector and a capillary coated with amino groups

Nicotine (NC) and its related compounds (cotinine (CN), nornicotine (NN), anatabine (AT) and anabasine (AB)) were simultaneously enantioseparated by CE using a capillary with amino groups and sulfated beta-CD as a chiral selector. The optimum running conditions were found to be 30 mM acetate buffer (pH 5.0) containing 8% sulfated beta-CD with an applied voltage of +15 kV at 30 degrees C using direct detection at 260 nm. Using a capillary coated with amino groups, the EOF migrates toward the positive pole. However, when sulfated beta-CD was added to the BGE, it was found that the EOF migrated toward the negative pole due to ionic adsorption of sulfated beta-CD to amino groups on the capillary inner wall. All the cationic analytes migrated as anions, suggesting that they formed stable anionic complexes with sulfated beta-CD. With this system and a simple pretreatment with mini-cartridges, NC alkaloids in five cigarette samples were enantioseparated. As a result, each of the compounds except for CN was detected. In the case of NC, only (S)-NC was detected (more than 99.9%), but in the case of NN, AT and AB, the ratios of (S)-isomer to total isomers were in the ranges 58-70, 81-85 and 59-65%, respectively. On the other hand, only NC was detected in cigarette smoke and the ratio of (S)- and (R)-NCs was 96:4. The amounts of NC alkaloids in cigarettes suggest that the production of (R)-NC resulted from racemization due to the high temperature/burning of the cigarette.

Cyclodextrins in capillary electrophoresis enantioseparations--recent developments and applications

Capillary EKC has been established as a versatile and robust CE method for the separation of enantiomers. Within the chiral selectors added to the BGE CDs continue as the most widely used selectors due to their structural variety and commercial availability. This is reflected in the large number of practical applications of CDs to analytical enantioseparations that have been reported between January 2006 and January 2008, the period of time covered by this review. Most of these applications cover aspects of life sciences such as drug analysis, bioanalysis, environmental analysis, or food analysis. Moreover, new CD derivatives have been developed in an attempt to achieve altered enantioselectivities and to further broaden the application range. Finally, efforts will be summarized that aim at an understanding of the molecular level of the chiral recognition between CDs and the analytes.

The role of cyclodextrins in chiral capillary electrophoresis

The members of the enantiomeric pairs frequently show rather different biological effects, so their chiral selective synthesis, pharmacological studies and analysis are necessary. CE has unique advantages in chiral analysis. The most frequently used chiral selectors are CDs in this field. This paper gives a short view on the advantages on CE in direct chiral separations, emphasizing the role of CDs. The reason for the broad selectivity spectra of CDs is discussed in detail. The physical background of chiral selective separations is briefly shown in CE. Their interaction mechanisms are shortly defined. The general trend of their use is statistically evaluated. Most frequently used CDs and CD derivatives are characterized. Advantages of ionizable CDs and single-isomer derivatives are shown. The general trend of their use is established.

Chiral separation of amino acids and glycyl dipeptides by chiral ligand-exchange capillary electrophoresis comparing Cu(II), Co(II), Ni(II) and Zn(II) complexes of three different sugar acids

This paper deals with comparative studies on the use of copper(II), cobalt(II), nickel(II) and zinc(II) complexes of d-gluconic acid, d-saccharic acid and l-threonic acid as chiral selectors for the enantioseparation of aromatic amino acids and glycyl dipeptides using the principle of ligand-exchange capillary electrophoresis. Although copper(II) is the most frequently used central ion in ligand-exchange capillary electrophoresis, in the case of d-gluconic acid cobalt(II) was shown to be an alternative for the enantioseparation of amino acids. Glycyl dipeptides, however, were resolved only with copper(II) complexes. Zn(II) as a central ion was not effective in all cases and with Ni(II) only some partial separations were achieved.

Electrokinetic chromatography with polymeric pseudostationary phases

Recent research and development efforts concerning polymeric pseudostationary phases (PSPs) for electrokinetic chromatography are reviewed. The introduction of new materials, characterization of structural effects on performance and selectivity, applications, and the use of polymeric PSPs with mass spectrometric detection are considered. Very interesting results concerning the effects of polymer structure have been reported. Significant developments have also been reported in the development of novel applications of polymeric PSPs, particularly for sample preconcentration using micellar affinity gradient focusing. The use of mass spectrometric detection with electrokinetic chromatography has seen significant development, and recent reports indicate that this is a robust and sensitive approach.

Recent developments in CE and CEC of peptides

The article brings a comprehensive survey of recent developments and applications of high-performance capillary electromigration methods, zone electrophoresis, ITP, IEF, affinity electrophoresis, EKC, and electrochromatography, to analysis, preparation, and physicochemical characterization of peptides. New approaches to the theoretical description and experimental verification of electromigration behavior of peptides and to methodology of their separations, such as sample preparation, adsorption suppression, and detection, are presented. Novel developments in individual CE and CEC modes are shown and several types of their applications to peptide analysis are presented: conventional qualitative and quantitative analysis, purity control, determination in biomatrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid and sequence analysis, and peptide mapping of proteins. Some examples of micropreparative peptide separations are given and capabilities of CE and CEC techniques to provide important physicochemical characteristics of peptides are demonstrated.

Determination of enantiomeric impurity of linezolid by capillary electrophoresis using heptakis-(2,3-diacetyl-6-sulfato)-beta-cyclodextrin

A method for the enantioseparation of linezolid, the first compound of a truly new class of antibiotics-the oxazolidinones, was developed. The elaborated method of linezolid enantiomers separation was successfully performed using an anionic single-isomer cyclodextrin-heptakis-(2,3-diacetyl-6-sulfato)-beta-cyclodextrin (HDAS-beta-CD) as a resolving agent with the help of the charged resolving agent migration model (CHARM model). The best results were obtained with 27.5mM HDAS-beta-CD dissolved in 50mM borate buffer, pH 9.0, 15 degrees C, normal polarity. The facile strategies for the reversal of the enantiomers elution order are also described. Afterwards, the optimized method was validated in terms of sensitivity, linearity, accuracy and precision.

Determination of organic acids by CE and CEC methods

A comprehensive overview of the analysis of low-molecular-mass organic acids employing electromigration methods in the capillary format is given. This review includes papers published since 2003 and can be seen as an update of the review paper published by Galli et al. in 2003. Tables included in this review contain application papers describing the determination of organic acids from a variety of fields like the analysis of food and beverages, environmental samples, samples from clinical origin, and from natural products.

Validated chiral separation of M9, a Mannich ketone compound, by chiral ligand-exchange chromatography

Enantioseparation of the Mannich ketone M9, a potential antifungal compound, was examined using chiral ligand-exchange chromatography. The chiral mobile phase contained complexes of Cu(II) with the optically active selector L-aspartame (APM) and the organic modifier methanol. The separation was optimized with respect to the concentration of the Cu(II)-(L-APM) complexes, pH of mobile phase, methanol content, and column temperature. A baseline separation (R(s) = 3.08) was achieved for enantiomers of M9 under optimal conditions, and the analysis was accomplished in eleven minutes. The developed method was extensively validated. The sample stability, linearity, precision (method repeatability and intermediate precision) and accuracy, and the limits of detection and quantification of the developed method were studied. The proposed method was shown to be accurate and suitable for the quantitative determination of each enantiomer of M9.