Evaluation of amorphous and lipid-based formulation strategies to increase the in vivo cannabidiol bioavailability in piglets

Cannabidiol (CBD) suffers from poor oral bioavailability due to poor aqueous solubility and high metabolism, and is generally administered in liquid lipid vehicles. Solid-state formulations of CBD have been developed, but their ability to increase the oral bioavailability has not yet been proven in vivo. Various approaches are investigated to increase this bioavailability. This study aimed to demonstrate the enhancement of the oral bioavailability of oral solid dosage forms of amorphous CBD and lipid-based CBD formulation compared to crystalline CBD. Six piglets received the three formulations, in a cross-over design. CBD and 7 - COOH - CBD, a secondary metabolite used as an indicator of hepatic degradation, were analyzed in plasma. A 10.9-fold and 6.8-fold increase in oral bioavailability was observed for the amorphous and lipid formulations, respectively. However, the lipid-based formulation allowed reducing the inter-variability when administered to fasted animals. An entero-hepatic cycle was confirmed for amorphous formulations. Finally, this study showed that the expected protective effect of lipids against hepatic degradation of the lipid-based formulation did not occur, since the ratio CBD/metabolite was higher than that of the amorphous one.

An Intravenous Pharmacokinetic Study of Cannabidiol Solutions in Piglets through the Application of a Validated Ultra-High-Pressure Liquid Chromatography Coupled to Tandem Mass Spectrometry Method for the Simultaneous Quantification of CBD and Its Carboxylated Metabolite in Plasma

Cannabidiol (CBD) has multiple therapeutic benefits that need to be maximized by optimizing its bioavailability. Numerous formulations are therefore being developed and their pharmacokinetics need to be studied, requiring analytical methods and data from intravenous administration. As CBD is susceptible to hepatic metabolism, the requirement of any method is to quantify metabolites such as 7-COOH-CBD. We demonstrated that CBD and 7-COOH-CBD could be simultaneously and correctly quantified in piglet plasma by using an UHPLC-MS/MS technique. The validated method allowed for an accurate bioanalysis of an intravenously injected solution consisting of CBD-HPβCD complexes. The experimental pharmacokinetic profile of CBD showed multi-exponential decay characterized by a fast apparent distribution half-life (0.25 h) and an elimination half-life of two hours. The profile of 7-COOH-CBD was not linked with the first-pass metabolism, since 80% of the maximum metabolite concentration was reached at the first sampling time point, without any decrease during the period of study. A two-compartment model was optimal to describe the experimental CBD profile. This model allowed us to calculate macro-micro constants and volumes of distribution (Vss = 3260.35 ± 2286.66 mL) and clearance (1514.5 ± 261.16 mL·h-1), showing that CBD is rapidly distributed to peripheral tissues once injected and slowly released into the bloodstream.

Performance evaluation of a MIP for the MISPE-LC determination of p-[18F]MPPF and a potential metabolite in human plasma

Within the family of serotonin (5-HT) receptors, the 5-HT_1A subtype is particularly interesting as it may be involved in various physiological processes or psychological disorders. The p-[¹⁸F]MPPF, a highly selective 5-HT_1A antagonist, is used for in vivo studies in human or animal by means of positron emission tomography (PET) [1]. In order to selectively extract p-[¹⁸F]MPPF and its main metabolites from plasma, molecularly imprinted polymer (MIP) was prepared against these compounds by using the p-MPPF as template. For the control of the selectivity, non-imprinted polymer (NIP) was also synthesized without template. The MIP sorbent, packed in disposable extraction cartridges (DECs), was then evaluated as molecularly imprinted solid-phase extraction (MISPE) prior to the LC determination. The conditions of extraction were evaluated in order to obtain the highest selective retention of the p-[¹⁸F]MPPF and its metabolites on this MIP. The MIP selectivity was exploited in the loading and washing steps by adjusting the pH of plasma samples at a suitable value and by selecting mixtures for the washing step to limit the contribution of non-specific interactions. Other important parameters involved in the conditioning and elution steps were also studied. Finally, a pre-validation was carried out with optimal extraction conditions to demonstrate the performance of this MISPE-LC method as a generic method in the context of evaluation of new MISPE for p-[¹⁸F]MPPF and its potential for metabolites extraction from human plasma.

Penetration of oxytetracycline into the nasal secretions and relationship between nasal secretions and plasma oxytetracycline concentrations after oral and intramuscular administration in healthy pigs

The penetration of oxytetracycline (OTC) in plasma and nasal secretions of healthy pigs was evaluated during the first study, in response to oral dose of 20 mg of OTC per kg of body weight (bwt) per day as a 400 mg/kg feed medication (n = 5) and to intramuscular (i.m.)-administered formulations at 10 mg/kg bwt (n = 5), 20 mg/kg bwt (n = 5), 40 mg/kg bwt (n = 5). Concentrations of OTC in plasma and nasal secretions were determined by a validated ultra-high performance liquid chromatography associated to tandem mass spectrometry method (UPLC/MS/MS). The objectives were to select the efficacy treatment and to evaluate the possibility to predict nasal secretions concentrations from those determined in plasma. The animals were housed together in each experiment. In each group, the treatment was administered once daily during 6 consecutive days, and nasal secretions and plasma were collected after 4 and 24 h at day 2 and day 6. For oral administration, only one medicated feed was prepared and distributed to all the animals together and was consumed in approximately 1 h. To meet recommendations of efficacy for OTC in nasal secretions, only the i.m. of 40 mg/kg bwt associated to an inter-dosing interval of 24 h provides and maintains concentrations in nasal secretions ≥1 μg/mL, appropriate to the MIC 50 and 90 of Pasteurella multocida and Bordetella bronchiseptica, respectively, the main pathological strains in nasal secretions. It has been demonstrated that, using a generalized linear mixed model (GLMM), OTC in the nasal secretions (μg/mL) can be predicted taking into account the OTC concentrations in plasma (μg/mL), according to the following equation: OTC(nasal secretions)  = 0.28 OTC(plasma) -1.49. In a second study, the pharmacokinetic behaviour of OTC in plasma and nasal secretions of healthy pigs was investigated, after single-dose i.m. of 40 mg/kg bwt of the drug. Blood samples and nasal secretions were collected at predetermined times after drug administration. The data collected in 10 pigs for OTC were subjected to non-compartmental analysis. In plasma, the maximum concentration of drug (C(max) ), the time at which this maximum concentration of drug (T(max) ) was reached, the elimination half-life (t½) and the area under the concentration vs. time curve (AUC) were, respectively, 19.4 μg/mL, 4.0, 5.1 h and 150 μg·h/mL. In nasal secretions, C(max) , T(max) , t½ and AUC were, respectively, 6.29 μg/mL, 4.0, 6.6 h and 51.1 μg·h/mL.

Penetration of enrofloxacin into the nasal secretions and relationship between nasal secretions and plasma enrofloxacin concentrations after intramuscular administration in healthy pigs

The pharmacokinetic behaviour of enrofloxacin (ENRO) in plasma and nasal secretions of healthy pigs was investigated, after a single-dose intramuscular administration of 2.5 mg/kg body weight of the drug. Blood samples and nasal secretions were collected at predetermined times after drug administration. Concentrations of ENRO and its active metabolite ciprofloxacin (CIPRO) were determined in plasma and nasal secretions by high-performance liquid chromatography (HPLC). CIPRO was not detected probably because we investigated young weaned pigs. The data collected in 12 pigs for ENRO were subjected to noncompartmental analysis. In plasma, the maximum concentration of drug (C(max)), the time at which this maximum concentration of drug (T(max)) was reached, the elimination half-life (t(1/2)(beta)) and the area under the concentration vs. time curve (AUC) were, respectively, 694.7 ng/mL, 1.0 h, 9.3 h and 8903.2 ngxh/mL. In nasal secretions, C(max), T(max), t(1/2)(beta) and AUC were, respectively, 871.4 ng/mL, 2.0 h, 12.5 h and 11 198.5 ngxh/mL. In a second experiment conducted in 10 piglets, the relationship between concentrations of ENRO measured in the plasma and the nasal secretions has been determined following single-dose intramuscular administration of 2.5, 10 or 20 mg/kg body weight of the drug. It has been demonstrated that, among several variables, i.e., (1) the dose administered, (2) the time between intramuscular injection and blood sampling, (3) the age, (4) the sex, (5) the animal body weight and (6) the plasma concentration of the drug, only the latter influenced significantly the ENRO concentration in nasal secretions. Practically, using a generalized linear mixed model, ENRO concentrations in the nasal secretions (microg/mL) can be predicted taking into account the ENRO concentrations in plasma (microg/mL), according to the following equation:

Generic systems for the enantioseparation of basic drugs in NACE using single-isomer anionic CDs

The enantioseparation of 10 basic drugs was evaluated in NACE systems using heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)-β-CD (HMAS-β-CD). For this purpose, a D-optimal design with 21 experimental points was applied. Four antifungal agents (econazole, isoconazole, miconazole, sulconazole), three local anesthetics (bupivacaine, mepivacaine and prilocaine), two sympathomimetics (salbutamol and terbutaline) and one β-blocker (carvedilol) were selected as basic model analytes. The influence on the enantiomeric resolution of anionic CD and BGE anion concentrations as well as the BGE anion nature was investigated. For all studied analytes, the enantiomeric resolution was shown to be significantly influenced by the CD concentration. Based on the observed results, a generic NACE system was recommended, namely 20mM HMAS-β-CD and 10mM ammonium camphor SO(3)(-) in methanol acidified with 0.75 M formic acid. Moreover, this NACE system was compared to previous conditions with heptakis(2,3-di-O-methyl-6-O-sulfo)-β-CD (HDMS-β-CD) or heptakis(2,3-di-O-acetyl-6-O-sulfo)-β-CD (HDAS-β-CD). Finally, two generic systems using either HDAS-β-CD or HMAS-β-CD were proposed and evaluated for the enantioseparation of ketamine and norketamine after incubation of ketamine in phenobarbital-induced male rat liver microsomes systems.

Association of two single-isomer anionic CD in NACE for the chiral and achiral separation of fenbendazole, its sulphoxide and sulphone metabolites: application to their determination after in vitro metabolism

A NACE method was developed for the separation of fenbendazole (FBZ), a prochiral drug giving rise to chiral (oxfendazole or OFZ) and nonchiral (FBZ sulphone or FBZSO(2)) metabolites. First, the effect of the nature and the concentration of CD as well as that of the acidic BGE on the enantiomeric separation of OFZ were studied. OFZ enantiomers were completely resolved using a BGE made up of 10 mM ammonium formate and 0.5 M TFA in methanol containing 10 mM heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-CD and 10 mM heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD. Moreover, the NACE method was found to be particularly well suited to the simultaneous determination of FBZ, OFZ enantiomers, and FBZSO(2). Thiabendazole was selected as an internal standard. The CD-NACE potential was then evaluated for in vitro metabolism studies using FBZ as a model case. The OFZ enantiomers and FBZSO(2) could be detected after incubation of FBZ in the phenobarbital-induced male rat liver microsomes systems.

Effect of the nature of the single-isomer anionic CD and the BGE composition on the enantiomeric separation of beta-blockers in NACE

The separation of ten beta-blockers has been investigated in NACE systems using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD (HDMS-beta-CD) and heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-CD (HDAS-beta-CD). The influence on enantioresolution, mobility difference and selectivity of the nature of both anionic CD and BGE anion as well as their concentrations were studied by means of a multivariate approach. A D-optimal design with 25 experimental points was applied. For all studied analytes, the enantiomeric resolution was shown to be significantly influenced by both CD nature and concentration. Except for two compounds, HDAS-beta-CD was found to give higher enantioresolution values than HDMS-beta-CD. The best enantioseparation for all compounds was achieved in the presence of a high chiral selector concentration and for most of them at a low BGE anion concentration. For each investigated compound, operating conditions leading to the best enantiomeric resolution were deduced. A generic NACE system was then recommended, namely 10 mM ammonium acetate and 40 mM HDAS-beta-CD in methanol acidified with 0.75 M formic acid. This generic system was able to completely resolve the enantiomers of all beta-blockers, with a R(s) value of at least 4. Finally, the optimal conditions obtained modelling resolution, mobility difference and selectivity were compared.

Enantioresolution of basic pharmaceuticals using cellulose tris(4-chloro-3-methylphenylcarbamate) as chiral stationary phase and polar organic mobile phases

A polysaccharide-based chiral stationary phase (Sepapak-4), with cellulose tris(4-chloro-3-methylphenylcarbamate) as chiral selector, has been investigated in liquid chromatography (LC). Its enantioresolution power was evaluated towards 13 basic amino-drugs with widely different structures and polarities, using polar organic mobile phases. After preliminary experiments, acetonitrile was selected as the main mobile phase component, to which a low concentration of diethylamine (0.1%) was systematically added in order to obtain efficient and symmetrical peaks. Different organic solvents were first added in small proportions (5-10%) to acetonitrile to modulate analyte retention. Polar organic modifiers were found to decrease retention and enantioresolution while hexane had the opposite effect, indicating normal-phase behaviour under these conditions. The addition of an organic acid (formic, acetic or trifluoroacetic acid) was found to strongly influence the retention of the basic amino drugs in these nonaqueous systems. The nature and proportion of the acidic additive in the mobile phase had also deep impact on enantioresolution. Therefore, the studied compounds could be subdivided in three groups in respect to the acidic additive used. All analytes could be enantioseparated in relatively short analysis times (10-20 min) using these LC conditions.

Development of a mass spectrometry method for the determination of a melanoma biomarker, 5-S-cysteinyldopa, in human plasma using solid phase extraction for sample clean-up

5-S-cysteinyldopa is a well-known pigment intermediate and analysis of its plasma concentration is interesting for the early diagnosis, as well as for evaluation of treatment and follow-up of malignant melanoma. A determination method of 5-SCD in human plasma was developed using solid phase extraction (SPE) on disposable cartridges and liquid chromatography electrospray mass spectrometry (LC-ESI-MS-MS). Compound's sensitivity to light and oxidation requires the addition of anti-oxidative agents (AO), to work in acidic media at 4 degrees C and to avoid light exposure of samples since blood collection. Different solid phases involving covalent binding to phenylboronic groups or dual retention mechanisms were evaluated and extraction cartridges containing both hydrophobic and strong cation exchange functionalities were finally selected. The LC separation of 5-SCD from endogenous catecholamines was achieved by gradient elution on a C18 stationary phase. 5-SCD was detected by multiple reaction monitoring (MRM) performed on ES(+) generated ions. Finally, the method was prevalidated in the lower ng/ml range. Good results with respect to accuracy, trueness and precision were obtained.

Harmonization of strategies for the validation of quantitative analytical procedures. A SFSTP proposal--part II

As reported in a previous paper, the main objective of the new commission of the Société Française des Sciences et Techniques Pharmaceutiques (SFSTP) was the harmonisation of approaches for the validation of quantitative analytical procedures. In a series of meetings, members of this Commission have first tried to review the objectives of analytical methods and the objectives of validation methods and to recommend the use of two-sided beta-expectation tolerance intervals for total error of validation samples (accuracy profile) in the acceptance/rejection of analytical method in validation phase. In the context of the harmonization, the other objectives were: (i) to propose a consensus on the norms usually recognized, while widely incorporating the ISO terminology; (ii) to recommend to validate the analytical procedure accordingly to the way it will be used in routine; (iii) to elaborate a rational, practical and statistically reliable strategy to assure the quality of the analytical results generated. This strategy has been formalised in a guide and the three latter objectives made by the Commission are summarised in the present paper which is the second part of summary report of the SFSTP commission. The SFSTP guide has been produced to help analysts to validate their analytical methods. It is the result of a consensus between professionals having expertise in analytical and/or statistical fields. The suggestions presented in this paper should therefore help the analyst to design and perform the minimum number validation experiments needed to obtain all the required information to establish and demonstrate the reliability of its analytical procedure.

Nonaqueous capillary electrophoretic behavior of 2-aryl propionic acids in the presence of an achiral ionic liquid

Ionic liquids (ILs) appear really attractive as electrolyte additives in nonaqueous capillary electrophoresis (NACE). These salts may offer new possibilities of interactions to modulate analyte effective mobilities. The presence of 1-n-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (BMIM NTf2) in acetonitrile/alcohol background electrolytes (BGEs) was investigated in this work. The aim of this study was to elucidate the influence of the IL concentration on the electrophoretic behavior of four arylpropionic acids and to identify the interactions between the analytes and the IL cation. The influence on mobility of the IL concentration, the nature and the proportion of the organic solvents, and the concentration of the ionic components of the BGE was first studied by a univariate approach. A four-factor D-optimal experimental design was then applied to provide a deeper insight into analyte interaction with IL cation present both free in BGE and adsorbed onto the capillary wall.

Enantiomeric separation of acidic compounds using single-isomer amino cyclodextrin derivatives in nonaqueous capillary electrophoresis

The enantiomeric separation of a series of acidic pharmaceuticals (mostly nonsteroidal anti-inflammatory drugs) has been investigated in NACE systems using single-isomer amino beta-CD derivatives. The first part of this study consisted of the selection of the basic experimental conditions to separate efficiently the enantiomers of acidic drugs. Several parameters, such as the nature of the ionic BGE components, were studied and a methanolic solution of ammonium acetate containing the cationic CD was selected as BGE. A D-optimal design with 20 experimental points was then applied and the nature and concentration of the CD were found to have a significant effect on the enantiomeric resolution for all studied compounds. Resolution (R(s)) values were always higher with 6-monodeoxy-6-mono(3-hydroxy)propylamino-beta-CD (PA-beta-CD) compared to those obtained with 6-monodeoxy-6-mono(2-hydroxy)propylamino-beta-CD (IPA-beta-CD). However, the latter led to shorter migration times. Generic NACE conditions were then selected by means of the multivariate approach in order to obtain the highest R(s) values in a minimum amount of time. Finally, dependence of separation selectivity, resolution, as well as mobility difference on chiral selector concentration was discussed and binding constants with PA-beta-CD were estimated for the two enantiomers of one of the model compounds, suprofen in these NACE systems.

The transfer of a LC-UV method for the determination of fenofibrate and fenofibric acid in Lidoses: Use of total error as decision criterion

Two new statistical approaches to assess the validity of the transfer of a LC-UV method for the determination of fenofibrate and fenofibric acid were investigated and compared to the conventional approaches generally used in this domain. These new approaches, namely the Tolerance Interval and the Risk approaches, are based on the simultaneous evaluation of the systematic (or trueness) and random (or precision) errors of the transfer into a single criterion called total error (or accuracy). The results of the transfer showed that only the total error based approaches fulfilled the objective of an analytical method transfer, i.e. to give guarantees that each future measurement made by the receiving laboratory will be close enough to the true value of the analyte in the sample. Furthermore the Risk approach was the most powerful one and allowed the estimation of the risk to have future measurements out of specification in the receiving laboratory, therefore being a risk management tool.

Pharmacokinetic study of a new synthetic MMP inhibitor (Ro 28-2653) after IV and oral administration of cyclodextrin solutions

Ro 28-2653 (5-biphenyl-4-yl-5-[4-(4-nitro-phenyl)-piperazin-1-yl]-pyrimidine-2,4,6-trione) is a new synthetic inhibitor of matrix metalloproteinases (MMPs) with a high selectivity towards MMP2, MMP9 and membrane type 1-MMP. It has been shown that cyclodextrins (CDs) are able to form inclusion complexes with Ro 28-2653 and to increase its aqueous solubility. The aim of this study is to demonstrate that an increase in Ro 28-2653 solubility, via ternary complex formation, can lead to an increase in the oral bioavailability of this drug. This study shows that a synergistic effect exists between hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and l-lysine. The use of this multicomponent system enabled the preparation of oral and intravenous solutions of Ro 28-2653. In vivo evaluation of the oral solution of the inclusion complex of Ro 28-2653 in comparison with a suspension of the same uncomplexed drug showed a significant (p<0.05) increase in absolute bioavailability. The area under curve (AUC) and the peak serum concentration (Cmax) were approximately 10 times higher than those obtained with the suspension, while the time (Tmax) to reach Cmax was reduced. Moreover, in vivo administration of Ro 28-2653 solutions highlighted some information about the pharmacokinetic behavior of Ro 28-2653: a long biologic half-life (about 15.5h) and a small overall volume of distribution (8l).

Precision study on capillary electrophoresis methods for metacycline

A CE method for metacycline (MTC) determination was investigated in an inter-laboratory experiment. Many problems were encountered in this study, most of which were related to the transfer of the method to different CE equipment. The reported problems could be classified into different categories: problems related to the precision, to the parameters in the protocol, and to the MTC peak shape. As the peak shape problem was partially responsible for the poor precision, a new CE method was developed in order to obtain a good MTC peak shape on all equipment. The precision of this new method for MTC determination was examined in an intermediate precision study, where the influence of the factors "time" and "equipment" was investigated. Although the new method could be transferred to different instruments, the precision remained poor mainly due to the contributions of the between-replicate and the between-injection variances.

Nonaqueous capillary electrophoresis method for the enantiomeric purity determination of S-timolol using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin: validation using the accuracy profile strategy and estimation of uncertainty

Nonaqueous capillary electrophoresis (NACE) was successfully applied to the enantiomeric purity determination of S-timolol maleate using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin (HDMS-beta-CD) as chiral selector. With a background electrolyte made up of a methanolic solution of 0.75 M formic acid, 30 mM potassium camphorsulfonate and containing 30 mM HDMS-beta-CD, the determination of 0.1% of R-timolol in S-timolol could be performed with an enantiomeric resolution of 8.5. Pyridoxine was selected as internal standard. The NACE method was then fully validated by applying a novel strategy using accuracy profiles. It is based on beta-expectation tolerance intervals for the total measurement error which includes trueness and intermediate precision. The uncertainty of measurements derived from beta-expectation tolerance intervals was estimated at each concentration level of the validation standards. To confirm the suitability of the developed and validated method, several real samples of S-timolol maleate containing R-timolol maleate at different concentrations were analysed and the results were compared to those obtained by liquid chromatography.

On-line coupling of cyclodextrin mediated nonaqueous capillary electrophoresis to mass spectrometry for the determination of salbutamol enantiomers in urine

The usefulness of the on-line coupling of nonaqueous capillary electrophoresis (NACE) with electrospray ionization (ESI) mass spectrometry (MS) using heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-cyclodextrin (HDAS-beta-CD) was demonstrated for the enantioselective determination of low concentrations of salbutamol in human urine. After optimization of several parameters, such as sheath-liquid composition and flow rate, nebulizing gas pressure, CE counter-pressure and position of the CE capillary outlet, a limit of quantification of 18 and 20 ng/ml was obtained for salbutamol enantiomers. Moreover, the relative standard deviation values for repeatability at a concentration of 30 ng/ml were below 7% for both enantiomers. Typical regression lines obtained after application of a simple linear regression model revealed a good relationship between peak area and analyte concentration (with 0.9988 and 0.9966 as coefficients of determination). This paper proposes an easy to use and sensitive NACE-MS method to determine enantiomers of a basic chiral drug in biological fluids preceded by solid-phase extraction as sample cleanup.

[The transfer of an automated method for the determination of noradrenaline in human urine: using total error as decision criterion]

Two new statistical approaches based on the total error of measurements were applied to the transfer of an automated method for the determination of noradrenalin in human urine by LC-ECD coupled on-line to SPE. They showed that the receiving laboratory was mastering the analytical procedure allowing it to use the method in routine. Furthermore the risk based approach gave guarantee that the risk to have future measurements out of specification in the receiving laboratory was smaller than 5%, therefore being a risk management tool.

[Comparison of three approaches for uncertainty estimation]

Three different approaches for the estimation of uncertainty measurements using the same analytical method were compared, namely validation, robustness and inter-laboratory studies. The uncertainty obtained with the robustness study! predicted well the uncertainty of the inter-laboratory study. On the other hand, the uncertainty estimation obtained with the validation study is lower than those obtained with the two other approaches but is still acceptable as long as the analytical method will be used in a single laboratory.

Pharmacological profile and therapeutic potential of BM-573, a combined thromboxane receptor antagonist and synthase inhibitor

BM-573 (N-terbutyl-N'-[2-(4'-methylphenylamino)-5-nitro-benzenesulfonyl]urea), a torsemide derivative, is a novel non-carboxylic dual TXA2 synthase inhibitor and receptor antagonist. The pharmacological profile of the drug is characterized by a higher affinity for the thromboxane receptor than that of SQ-29548, one of the most powerful antagonists described to date, by a complete prevention of human platelet aggregation induced by arachidonic acid at a lower dose than either torsemide or sulotroban, and by a significantly prolonged closure time measured by the platelet function analyser (PFA-100). Moreover, at the concentrations of 1 and 10 microM, BM-573 completely prevented production of TXB2 by human platelets activated by 0.6 mM of arachidonic acid. BM-573 prevents rat fundus contraction induced by U-46619 but not by prostacyclin or other prostaglandins. Despite possessing a chemical structure very similar to that of a diuretic torsemide, BM-573 has no diuretic activity. BM-573 does not prolong bleeding time and, unlike some of the other sulfonylureas, has no effect on blood glucose levels. In vivo, BM-573 appears to have antiplatelet and antithrombotic activities since it reduced thrombus weight and prolonged the time to abdominal aorta occlusion induced by ferric chloride. BM-573 also relaxed rat aorta and guinea pig trachea precontracted with U-46619. In pigs, BM-573 completely antagonized pulmonary hypertensive effects of U-46619 and reduced the early phase of pulmonary hypertension in models of endotoxic shock and pulmonary embolism. Finally, BM-573 protected pigs from myocardial infarction induced by coronary thrombosis. These results suggest that BM-573 should be viewed as a promising therapeutic agent in the treatment of pulmonary hypertension and syndromes associated with platelet activation.

Influence of the nature of the electrolyte on the chiral separation of basic compounds in nonaqueous capillary electrophoresis using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin

The influence on the enantiomeric resolution of the nature of the cationic BGE component (sodium, ammonium or potassium) and that of the anionic component (chloride, formate, methanesulfonate or camphorsulfonate) as well as the concentration of heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin (HDMS-beta-CD), the selected chiral selector, was studied in nonaqueous capillary electrophoresis (NACE). For this purpose, two D-optimal designs with 33 and 26 experimental points were applied. Three beta-blockers (atenolol, celiprolol and propranolol) and three local anesthetics (bupivacaine, mepivacaine and prilocaine) were selected as basic model compounds. Both cationic and anionic BGE components were found to have a deep impact on the enantiomeric resolution of the investigated analytes but it is the cationic component that has shown the strongest influence. Indeed, in some cases, the change of the latter led to a complete loss of enantioresolution. Based on the observed results, two NACE systems were recommended, namely ammonium formate and potassium camphorsulfonate in a methanolic solution containing HDMS-beta-CD and acidified with formic acid, in order to separate efficiently the enantiomers of basic drugs.

Harmonization of strategies for the validation of quantitative analytical procedures. A SFSTP proposal--Part I

This paper is the first part of a summary report of a new commission of the Société Française des Sciences et Techniques Pharmaceutiques (SFSTP). The main objective of this commission was the harmonization of approaches for the validation of quantitative analytical procedures. Indeed, the principle of the validation of theses procedures is today widely spread in all the domains of activities where measurements are made. Nevertheless, this simple question of acceptability or not of an analytical procedure for a given application, remains incompletely determined in several cases despite the various regulations relating to the good practices (GLP, GMP, ...) and other documents of normative character (ISO, ICH, FDA, ...). There are many official documents describing the criteria of validation to be tested, but they do not propose any experimental protocol and limit themselves most often to the general concepts. For those reasons, two previous SFSTP commissions elaborated validation guides to concretely help the industrial scientists in charge of drug development to apply those regulatory recommendations. If these two first guides widely contributed to the use and progress of analytical validations, they present, nevertheless, weaknesses regarding the conclusions of the performed statistical tests and the decisions to be made with respect to the acceptance limits defined by the use of an analytical procedure. The present paper proposes to review even the bases of the analytical validation for developing harmonized approach, by distinguishing notably the diagnosis rules and the decision rules. This latter rule is based on the use of the accuracy profile, uses the notion of total error and allows to simplify the approach of the validation of an analytical procedure while checking the associated risk to its usage. Thanks to this novel validation approach, it is possible to unambiguously demonstrate the fitness for purpose of a new method as stated in all regulatory documents.

Automated method for the determination of a new matrix metalloproteinase inhibitor in ovine plasma and serum by coupling of restricted access material for on-line sample clean-up to liquid chromatography

A fully automated liquid chromatographic method was developed for the determination of Ro 28-2653, a new synthetic inhibitor of matrix metalloproteinases (MMPs), in ovine serum and plasma. The method was based on the coupling of a pre-column packed with restricted access material, namely LiChrospher RP-8 ADS (alkyl diol silica), for sample clean-up to an analytical column containing octyl silica stationary phase. One hundred microl of biological sample, to which 2-propanol was automatically added, were injected onto the ADS pre-column, which was then washed with a washing liquid consisting of a mixture of 25 mM phosphate buffer (pH 7.0) and acetonitrile (90:10; v/v) for 10 min. By rotation of the switching valve, the analyte was then eluted in the back-flush mode with the LC mobile phase composed of a mixture of acetonitrile and 25 mM phosphate buffer (pH 7.0) (57:43; v/v). The UV detection was performed at 395 nm. The main parameters likely to influence the sample preparation technique were investigated. The method was then validated over a concentration range from 17.5 to 1950 ng/ml, the first concentration level corresponding to the lower limit of quantitation. At this concentration level, the mean bias and the R.S.D. value for intermediate precision were -2.4% and 4.2%, respectively.

Enantiomeric separation of basic compounds using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin in combination with potassium camphorsulfonate in nonaqueous capillary electrophoresis: optimization by means of an experimental design

The enantiomeric separation of a series of basic pharmaceuticals (beta-blockers, local anesthetics, sympathomimetics) has been investigated in nonaqueous capillary electrophoresis (NACE) systems using heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-cyclodextrin (HDMS-beta-CD) in combination with potassium camphorsulfonate (camphorSO3-). For this purpose, a face-centered central composite design with 11 experimental points was applied. The effect of the concentrations of HDMS-beta-CD and camphorSO3- on enantioresolution was statistically evaluated and depended largely on the considered analyte. The presence of camphorSO3- was found to be particularly useful for the enantioseparation of compounds with high affinity for the anionic CD. CamphorSO3- seems to act as a competitor, reducing the affinity for the CD, probably by ion-pair formation with these analytes. For compounds with lower affinity for HDMS-beta-CD, the combination of camphorSO3- and the CD appeared to have a favorable effect on enantioresolution only if the optimal CD concentration could be reached. On the other hand, for compounds characterized by a very low affinity for the anionic CD, the association of camphorSO3- and HDMS-beta-CD is always unfavorable. Finally, experimental conditions were selected by means of the multivariate approach in order to obtain the highest resolution (Rs) value for each studied compound.

Integrated on-line sample clean-up using cation exchange restricted access sorbent for the LC determination of atropine in human plasma coupled to UV detection

A new, simple and fully automated liquid chromatographic (LC) method with UV detection has been developed for the direct determination of atropine in plasma. Sample clean-up was based on the use of cation exchange restricted access material (RAM) in a pre-column, coupled to LC by means of a column switching system. After direct injection of a 200 microl-volume of plasma sample, the biological matrix was washed out for 10 min using a washing liquid composed of 2 mM lithium perchlorate adjusted to pH 3.0 and methanol (97:3; v/v). By rotation of the switching valve, atropine was then eluted in the back-flush mode for 2 min and transferred to the analytical column packed with octadecyl silica by the LC mobile phase constituted of a mixture of acetonitrile and potassium phosphate buffer (pH 3.0; 50 mM) containing 2 mM sodium heptanesulfonate (16:84; v/v). The UV detection was performed at 220 nm. The method was validated according to a new approach based on accuracy profile over a concentration range from 25 ng/ml, corresponding to the limit of quantitation, to 1000 ng/ml. The method was then applied for the determination of atropine in plasma after intravenous administration to hospitalised patients.

Development and validation of a fully automated LC method for the determination of cloxacillin in human plasma using anion exchange restricted access material for sample clean-up

In the framework of a preliminary investigation on the plasma profile of cloxacillin after oral administration, a simple and rapid LC method was developed for the direct determination of this compound in human plasma. The on-line sample clean-up was carried out using a weak anion exchanger (diethylaminoethyl groups) as restricted access material (RAM). The effects of the washing liquid pH, the ionic strength and the addition of organic modifier to the washing liquid were studied in order to obtain an efficient sample clean-up and a high recovery of cloxacillin. The separation was achieved on octadecylsilica stationary phase using a mobile phase consisting in a mixture of phosphate buffer (pH 4.0; 25 mM) and acetonitrile (72:28, v/v). The UV detection was performed at 215 nm. The most appropriate regression model of the response function as well as the limit of quantitation (LOQ) were first selected during the pre-validation step. These criteria were then assessed during the formal validation step. The LOQ was 50 ng/ml. The method was also validated with respect to analyte recovery, precision, trueness, accuracy and linearity. Finally, it was successfully applied for the analysis of the first plasma samples obtained from patients having taken an oral dose of 500 mg cloxacillin.

Fully automated method for the liquid chromatographic-tandem mass spectrometric determination of cyproterone acetate in human plasma using restricted access material for on-line sample clean-up

A new automated method for the quantitative analysis of cyproterone acetate (CPA) in human plasma has been developed using on-line solid phase extraction (SPE) prior to the LC-MS/MS determination. The method was based on the use of a pre-column packed with internal-surface reversed-phase material (LiChrospher RP-4 ADS, 25 mm x 2 mm) for sample clean-up coupled to LC separation on an octadecyl silica stationary phase by means of a column switching system. A 30 microl plasma sample volume was injected directly onto the pre-column using a mixture of water, acetonitrile and formic acid (90:10:0.1 (v/v/v)) adjusted to pH 4.0 with diluted ammonia as washing liquid. The analyte was then eluted in the back-flush mode with the LC mobile phase consisting of water, methanol and formic acid (10:90:0.1 (v/v/v)). The dispensing flow rates of the washing liquid and the LC mobile phase were 300 microl min(-1). Medroxyprogesterone acetate (MPA) was used as internal standard. The MS ionization of the analytes was achieved using electrospray (ESI) in the positive ion mode. The pseudomolecular ionic species of CPA and MPA (417.4 and 387.5) were selected to generate daughter ions at 357.4 and 327.5, respectively. Finally, the developed method was validated according to a new approach using accuracy profiles as a decision tool. Very good results with respect to accuracy, detectability, repeatability, intermediate precision and selectivity were obtained. The LOQ of cyproterone acetate was 300 pg ml(-1).

Development and validation of a high-performance liquid chromatographic method for the determination of cyproterone acetate in human skin

In the framework of a preliminary study on the transdermal penetration of cyproterone acetate (CPA), a simple and rapid procedure involving an extraction step coupled to a HPLC-UV determination has been developed for the separation and quantification of CPA in the two main skin layers-epidermis and dermis-after local application. The separation of epidermis and dermis layers was carefully carried out by means of a sharp spatula after skin immersion in heated water at 65 degrees C. The two skin layers were then treated separately according to the same process: (1) sample homogenization by vibration after freezing with liquid nitrogen in a Mikro-Dismembrator; (2) CPA extraction with methanol after addition of the internal standard (betamethasone dipropionate); (3) centrifugation; (4) evaporation of a supernatant aliquot; (5) dissolution of the dry residue in methanol and addition of water; (6) centrifugation; (7) injection of a supernatant aliquot into the HPLC system. The separation was achieved on octadecylsilica stationary phase using a mobile phase consisting in a mixture of acetonitrile and water (40:60 (v/v)). The method was then validated using a new approach based on accuracy profiles over a CPA concentration range from 33 to 667 ng/ml for each skin layer. Finally, the method was successfully applied to the determination of CPA to several skin samples after topical application of different gel formulations containing CPA.

Development and validation of a high performance liquid chromatographic method for quantitative determination of aporphine alkaloids from different samples of Cassytha filiformis

A sensitive and accurate procedure based on an alkaloid extraction coupled to an HPLC-UV-MS determination has been developed for the separation and quantification of the major aporphines in Cassytha filiformis. The extraction step and the liquid chromatography conditions were optimized in order to improve the selectivity of the method. The HPLC mobile phase consisted of a mixture of water containing 10 mM ammonium acetate adjusted to pH 3 with acetic acid-acetonitrile (90: 10, v/v) (A) and acetonitrile (B) used in a gradient mode (0 to 40%). The stationary phase was an RP-select B (5 micro m) column. The method was completely validated using cassythine, one of the major aporphines in our samples, as reference standard and successfully applied to the determination of these pharmacologically interesting aporphines in seven different batches of C. filiformis. The detection and quantitation limits of cassythine were found to be 13 and 20 micrograms/mL, respectively. The results showed variations in the total alkaloid content in samples from 0.11 to 0.43%.

Determination of salbutamol enantiomers in human urine using heptakis(2,3-di-O-acetyl-6-O-sulfo)-β-cyclodextrin in nonaqueous capillary electrophoresis

Nonaqueous capillary electrophoresis (NACE) was successfully applied to the resolution and the determination of salbutamol enantiomers in urine samples using heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-cyclodextrin (HDAS-beta-CD). After optimization of the electrophoretic parameters, namely the background electrolyte (BGE) composition and the HDAS-beta-CD concentration, salbutamol enantiomers were completely resolved using a BGE made up of 10 mM ammonium formate and 15 mM HDAS-beta-CD in methanol acidified with 0.75 M formic acid. Isoprenaline was selected as internal standard. Solid-phase extraction (SPE) was used for sample cleanup prior to the CE separation. Different sorbents involving polar, nonpolar interactions or dual retention mechanisms were evaluated and extraction cartridges containing both nonpolar and strong cation-exchange functionalities were finally selected. Salbutamol enantiomers recoveries from urine samples were determined. The method was then successfully validated using a new approach based on accuracy profiles over a concentration range from 375 to 7500 ng/mL for each enantiomer.

Evaluation of a novel anion-exchange restricted-access sorbent for on-line sample clean-up prior to the determination of acidic compounds in plasma by liquid chromatography

A new kind of silica-based restricted-access material (RAM) with anionic properties has been tested in pre-columns for on-line solid-phase extraction of acidic compounds from directly injected plasma samples prior to their determination by reversed-phase liquid chromatography (LC), using the column-switching technique. The outer surface of the porous RAM particles contains hydrophilic diol groups while diethylaminoethyl (DEAE) groups are bound to the internal surface which gives the sorbent the properties of a weak anion exchanger towards low-molecular-mass compounds. Due to an appropriate pore diameter (about 6 nm), macromolecules, such as proteins, are physically excluded from the pores and flushed directly out during the sample clean-up process, while small compounds have access to the inner surface and can be retained mainly by electrostatic interactions. The retention capability of this novel packing material has been tested for some hydrophilic acidic compounds such as aspartic acid, glutamic acid, ascorbic acid and acetylcysteine as well as for some more hydrophobic drugs such as naproxen, ibuprofen and diclofenac, used as model compounds. The influence of the composition of the washing liquid on the retention of the analytes in the pre-column has been investigated. The efficiency of the sorbent to clean-up complex matrices was also tested using human plasma and urine samples. A generic washing liquid composition was then selected in order to obtain efficient and selective sample clean-up as well as a high recovery of the acidic analytes.