In vivo strain in cranial sutures: the zygomatic arch

Enlargement of the temporalis muscle and alterations in the lateral cranial vault

The purpose of this study was to test the hypothesis that increased masticatory muscle accompanied morphologic changes in the temporal bone and squamosal suture. Ten mice deficient for the protein myostatin (Mstn -/-) had significantly increased skeletal muscle mass and were compared with nine controls (Mstn +/+). Variables measured include linear and areal metrics describing temporal size and temporal bone shape as well as the extent of the area of the squamosal suture that overlaps, or bevels, with parietal bones. Mstn-/- mice showed significantly larger temporalis muscles. Their temporal bones showed significantly decreased size as well as decreased beveling of the squamosal suture. These decreases were absolute as well as relative and were not restricted to either vertical or horizontal axes. The increased masticatory musculature of Myostatin-null mice had a shrinking effect on the temporal aspect of the cranium. These results are inconsistent with the interpretation that increased temporalis mass induces morphologic changes in temporal bone that compensate for putative increases in compressive forces transduced at this region. Rather than increase in the area of overlap between two calvarial bones, potential increase in biomechanical loading along the temporal squama led to a smaller bevel which would presumably weaken this joint. It is unclear why this is so. Either compressive forces are not anabolic to suture beveling or they do upregulate growth of the suture bevel, with compression not being the primary loading regime at this suture.

A quantitative analysis of the Eutherian orbit: correlations with masticatory apparatus

The mammalian orbit, or eye-socket, is a highly plastic region of the skull. It comprises between seven and nine bones, all of which vary widely in their contribution to this region among the different mammalian orders and families. It is hypothesised that the structure of the mammalian orbit is principally influenced by the forces generated by the jaw-closing musculature. In order to quantify the orbit, fourteen linear, angular and area measurements were taken from 84 species of placental mammals using a Microscribe-3D digitiser. The results were then analysed using principal components analysis. The results of the multivariate analysis on untransformed data showed a clear division of the mammalian taxa into temporalis-dominant forms and masseter-dominant forms. This correlation between orbital structure and masticatory musculature was reinforced by results from the size-corrected data, which showed a separation of the taxa into the three specialised feeding types proposed by Turnbull (1970): i.e. 'carnivore-shear', 'ungulate-grinding' and 'rodent-gnawing'. Moreover, within the rodents there was a clear distinction between species in which the masseter is highly developed and those in which the temporalis has more prominence. These results were reinforced by analysis of variance which showed significant differences in the relative orbital areas of certain bones between temporalis-dominant and masseter-dominant taxa. Subsequent cluster analysis suggested that most of the variables could be grouped into three assemblages: those associated with the length of the rostrum; those associated with the width of the skull; and those associated with the relative size of the orbit and the shape of the face. However, the relative area of the palatine bone showed weak correlations with the other variables and did not fit into any group. Overall the relative area of the palatine was most closely correlated with feeding type, and this measure that appeared to be most strongly associated with the arrangement of the masticatory musculature. These results give a strong indication that, although orbital structure is in part determined by the relative size and orientation of the orbits, the forces generated by the muscles of mastication also have a large effect.

Ontogeny and diachronic changes in sexual dimorphism in the craniofacial skeleton of rhesus macaques from Cayo Santiago, Puerto Rico

Insight into the ontogeny of sexual dimorphism is important to our understanding of life history, ecology, and evolution in primates. This study applied a three-dimensional method, Euclidean Distance Matrix Analysis, to investigate sexual dimorphism and its diachronic changes in rhesus macaque (Macaca mulatta) skulls. Twenty-one landmarks in four functional areas of the craniofacial skeleton were digitized from macaques of known age and sex from the Cayo Santiago collections. Then, a series of mean form matrices, form difference matrices, and growth matrices were computed to demonstrate growth curves, rates and duration of growth, and sexual dimorphism within the neurocranium, basicranium, palate, and face. The inclusion of fully adult animals revealed a full profile of sexual dimorphism. Additionally, we demonstrate for the first time diachronic change in adult sexual dimorphism caused by extended growth in adult females. A quicker growth rate in males from ages 2 to 8 was offset by a longer duration of growth in adult females that resulted in diminished dimorphism between the ages of 8 and 15. Four functional areas showed different sex-specific growth patterns, and the rate and duration of growth in the anterior facial skeleton contributed most to the changing profiles of sexual dimorphism. The late maturation in size of the female facial skeleton corresponds to later and less complete fusion of facial sutures. The prolongation of growth in females is hypothesized to be an evolutionary response to high levels of intrasexual competition, as is found in other primate species such as common chimpanzees with similar colony structure and reproductive behavior. Further investigation is required to determine (1) if this phenomenon observed in craniofacial skeletons is linked to sexual dimorphism in body size, and (2) whether this diachronic change in sexual dimorphism is species specific. The changing profile of sexual dimorphism in adult rhesus macaques suggests caution in studying sexual dimorphism in fossil primate and human forms.

Stress and displacement patterns in the craniofacial skeleton with rapid maxillary expansion: A finite element method study

INTRODUCTION

The purpose of this finite element study was to evaluate stress distribution along craniofacial sutures and displacement of various craniofacial structures with rapid maxillary expansion (RME) therapy.

METHODS

The analytic model for this study was developed from sequential computed tomography scan images taken at 2.5-mm intervals of a dry young human skull. Subsequently, a finite element method model was developed from computed tomography images by using AutoCAD software (2004 version, Autodesk, Inc, San Rafael, Calif) and ANSYS software (version 10, Belcan Engineering Group, Downers Grove, Ill).

RESULTS

The maxilla moved anteriorly and downward and rotated clockwise in response to RME. The pterygoid plates were displaced laterally. The distant structures of the craniofacial skeleton--zygomatic bone, temporal bone, and frontal bone--were also affected by transverse orthopedic forces. The center of rotation of the maxilla in the X direction was somewhere between the lateral and the medial pterygoid plates. In the frontal plane, the center of rotation of the maxilla was approximately at the superior orbital fissure. The maximum von Mises stresses were found along the frontomaxillary, nasomaxillary, and frontonasal sutures. Both tensile and compressive stresses could be demonstrated along the same suture.

CONCLUSIONS

RME facilitates expansion of the maxilla in both the molar and the canine regions. It also causes downward and forward displacement of the maxilla and thus can contribute to the correction of mild Class III malocclusion. The downward displacement and backward rotation of the maxilla could be a concern in patients with excessive lower anterior facial height. High stresses along the deep structures and the various sutures of the craniofacial skeleton signify the role of the circummaxillary sutural system in downward and forward displacement of the maxilla after RME.

Terrestrial-style feeding in a very early aquatic tetrapod is supported by evidence from experimental analysis of suture morphology

There is no consensus on when in the fish-tetrapod transition suction feeding, the primary method of prey capture in the aquatic realm, evolved into the direct biting on prey typical of terrestrial animals. Here, we show that differences in the morphology of selected cranial sutures between species that span the fish-tetrapod transition (the Devonian osteolepiform fish Eusthenopteron, the aquatic Devonian tetrapod Acanthostega, and the Permian terrestrial tetrapod Phonerpeton) can be used to infer when terrestrial feeding first appeared. Our approach consists of defining a sutural morphospace, assigning functional fields to that morphospace based on our previous measurements of suture function made during feeding in the living fish Polypterus, inferring the functions of the fossil sutures based on where they fall in the morphospace, and then using the correlation between feeding mode and the patterns of inferred suture function across the skull roof in taxa where feeding mode is unambiguous to infer the feeding mode practiced by Acanthostega. Using this procedure, we find that the suture morphologies of Acanthostega are inconsistent with the hypothesis that it captured prey primarily by means of suction, which suggests that it may have bitten directly on prey at or near the water's edge. Thus, our data strongly support the hypothesis that the terrestrial mode of feeding first emerged in aquatic taxa.

Linking form and function of the fibrous joints in the skull: a new quantification scheme for cranial sutures using the extant fish Polypterus endlicherii

The aim of this study is to connect specific sutural morphologies with the specific types of deformation they experience. To meet this goal, we quantified the morphologies of the interfrontal (IF), interparietal (IP), and frontoparietal (FP) sutures in the extant fish Polypterus endlicherii, and used our published measurements of in vivo deformation of these sutures during feeding to infer how suture morphology and function are connected. Specifically, we found that three relatively simple measures of cross-sectional suture complexity (i.e., the ratio of total sutural length to its shortest end-to-end length; amount of sutural overlap; and size of the largest interdigitation) can be used to distinguish between the IF, FP, and IP sutures, which exhibit very different cross-sectional shapes and responses to loading. Interestingly, these differences in cross-sectional morphology are not reflected by the linear traces of these sutures on the surface of the skull, implying that cross-sectional shape of a suture must be known to infer the loading conditions it experiences. Plotting the three cross-sectional metrics against one another to yield a sutural morphospace shows that the IF, IP, and FP sutures define regions that are largely distinct from one another. Our previous measurements of strain across these sutures suggested that the FP region would lie between the IF and IP regions; instead, the FP region is largely set apart from the other two fields. Based on this discovery, and on the locations of cranial muscles, we propose a new model of deformation in the skull of P. endlicherii during feeding, in which rotation parallel to the skull roof is combined with bending, subjecting the FP suture to complex shearing. Finally, although the sutures of P. endlicherii appear to be significantly less complex than those of mammals, these fish sutures show a similar range of morphologies and perform similar functions as do mammalian sutures.

Remodeling the dentofacial skeleton: the biological basis of orthodontics and dentofacial orthopedics

Orthodontic tooth movement is dependent upon the remodeling of the periodontal ligament and alveolar bone by mechanical means. Facial sutures are also fibrous articulations, and by remodeling these joints, one can alter the positional relationships of the bones of the facial skeleton. As might be expected from the structure and mobility of the temporomandibular joint (TMJ), this articulation is more resistant to mechanical deformation, and whether functional mandibular displacement can alter the growth of the condyle remains controversial. Clinical investigations of the effects of the Andresen activator and its variants on dentofacial growth suggest that the changes are essentially dento-alveolar. However, with the popularity of active functional appliances, such as the Herbst and twin-block based on 'jumping the bite', attention has focused on how they achieve dentofacial change. Animal experimentation enables informed decisions to be made regarding the effects of orthodontic treatment on the facial skeleton at the tissue, cellular, and molecular levels. Both rat and monkey models have been widely used, and the following conclusions can be drawn from such experimentation: (1) Facial sutures readily respond to changes in their mechanical environment; (2) anterior mandibular displacement in rat models does not increase the mitotic activity of cells within the condyle to be of clinical significance, and (3) mandibular displacement in non-human primates initiates remodeling activity within the TMJ and can alter condylar growth direction. This last conclusion may have clinical utility, particularly in an actively growing child.

Cellular response to force application at craniofacial sutures

OBJECTIVES

To provide a comprehensive review of the literature describing research done on the responses of suture cells to force application in vitro and in vivo.

DESIGN AND RESULTS

This review outlines the types of forces that can be applied, methods of applying the forces, the sutures used in experiments, and the changes in morphology, molecular biology (gene and protein expression), and cell biology (proliferation, differentiation, apoptosis) in response to these forces.

CONCLUSION

The molecular response of sutures to force needs to be further investigated as these molecules can be used to enhance the way in which craniofacial sutures respond to mechanical force during orthopedic-orthodontic treatment.

Ontogeny of bone strain: the zygomatic arch in pigs

At the time of weaning, infant animals have little experience with hard food, and thus their skulls are not likely to be epigenetically adapted for the loads imposed by mastication. We examined bone strain in the zygomatic arch of 4-week-old weanling piglets. Functional strains in piglets differed from those previously reported for older pigs in that the squamosal bone was not bent in the horizontal plane and the principal tensile strain on the zygomatic bone did not correspond to the direction of masseter muscle pull. Strain patterns were more variable in piglets than in older pigs. In older pigs, masticatory strains can be reproduced by stimulating the masseter muscles. When the piglet masseter was stimulated, strain patterns were more similar to those of older pigs, but shear strain magnitudes were the largest yet recorded from mammalian skull bones, up to 4000 muepsilon. To put these findings in the context of skeletal adaptation, 45 dry skulls, including some animals from the strain study, were measured. Reduced major axis regressions indicated that the infant arch was rounder in cross section and straighter than that of older animals. With growth, the arch became dorsoventrally higher, while mediolateral thickness decreased in the squamosal bone. Overall, these changes should make strain more predictable, explaining the lower variability in older animals. Other factors likely to be important in causing unique strain regimes in piglets include (1) unfamiliarity with hard food, (2) greater importance of muscles other than the same-side masseter and (3) greater proximity of molariform teeth to the arch. Collectively, these data indicate that the skeleton is not pre-adapted for specific functional loads.

In vivocranial suture function and suture morphology in the extant fishPolypterus: implications for inferring skull function in living and fossil fish

This study describes the mechanical role that cranial sutures play in fish during feeding. The long-term goal of our work is to establish relationships between suture form and function, so that functional inferences can be made from suture morphology in fossil taxa. To this end, strain gauges were surgically implanted across selected sutures in the skull roof of four individuals of Polypterus endlicherii. After surgery, bone and suture strains during feeding were recorded along with high-speed video of the feeding events. Each trial was designated as a suction feeding or biting on prey trial, and neurocranial elevation, hyoid position and gape were quantified to aid in interpreting the strain data. The strains due to suction feeding are different from those observed during biting. Suction feeding results in a fairly stereotyped strain pattern, with the interfrontal and frontoparietal sutures experiencing tension, while the interparietal suture is compressed. Biting causes much more variable strain patterns. However, both suction and biting result in compression in the back of the skull, and tension between the frontals. Peak strains, and the time at which they occur in the feeding cycle, were compared between suction and biting. In general, peak suture strains are higher during suction than during biting, but not all of these differences are significant. Peak suture and bone strains occur at or near maximum gape during both suction and biting, suggesting that these strains are caused by muscle contraction involved in mouth opening and closing. Micro-computed tomography (microCT) scans of the experimental specimens indicate that the interfrontal and frontoparietal sutures, typically loaded in tension, are less interdigitated in cross section than the interparietal suture, which experiences compression. This is consistent with published correlations of suture form and function in mammals, where interdigitated sutures indicate compression and lack of interdigitation is associated with tension.

Load transmission in the nasofrontal suture of the pig, Sus scrofa

The nasofrontal suture links the nasal complex with the braincase and is subject to compressive strain during mastication and (theoretically) tensile strain during growth of nasal soft tissues. The suture's ability to transmit compressive and tensile loads therefore affects both cranioskeletal stress distribution and growth. This study investigated the in vitro viscoelastic and failure properties of the nasofrontal suture in the pig, Sus scrofa. Suture specimens from two ages were tested in compression and tension and at fast and slow rates. In additional specimens, strain gauges were applied to the suture and nasal bone for strain measurement during testing. Relaxation testing demonstrated higher elastic moduli in tension than compression, regardless of test rate or pig age. In contrast, maximum elastic moduli from failure tests, as well as peak stresses, were significantly higher in compression than in tension. Sutures from older pigs tended to have higher elastic moduli and peak stresses, significantly so for tensile relaxation moduli. Strain gauge results showed that deformation at the suture was much greater than that of the nasal bone. These data demonstrate the viscoelasticity and deformability of the nasofrontal sutural ligament. The suture achieved maximal resistance to tensile deformation at low loads, corresponding with the low tensile loads likely to occur during growth of nasal soft tissues. In contrast, the maximal stiffness in compression at high loads indicates that the suture functions with a substantial safety factor during mastication.

Functional influence on sutural bone apposition in the growing rat

INTRODUCTION

The aim of this study was to quantify the influence of reduced masticatory muscle function on sutural bone apposition in the growing rat.

METHODS

Twenty-six growing male albino rats were randomly divided into 2 equal groups; 1 (hard-diet group) received the ordinary diet of hard pellets, and the other (soft-diet group) received the powdered form of the ordinary diet mixed with water. The experimental period started when the rats were 4 weeks old and lasted 42 days. At days 0, 14, and 28, calcein was injected into all animals. At the end of the experiment, the animals were killed, and the heads were taken for preparation of undecalcified frontal sections, 120 microm thick. Three representative homologous sections for each animal in both groups were selected and studied under a fluorescence microscope. The level of bone apposition at the time of calcein injection was marked with separate fluorescing lines. Because the lines from the first injection could not be seen in all areas, bone apposition in the internasal, naso-premaxillary, and inter-premaxillary sutures was quantified from day 14 to the end of the experimental period, by using an image analysis software.

RESULTS

In both groups, greater bone apposition was found between days 14 and 28 than between days 28 and 42 of the experimental period. Less bone apposition was found in the soft-diet group than in the hard-diet group in all sutures studied.

CONCLUSIONS

The findings suggest that bone apposition in the studied facial sutures in the anterior facial skeleton of the growing rat is significantly affected by reduced masticatory function.

Fusion patterns of craniofacial sutures in rhesus monkey skulls of known age and sex from Cayo Santiago

Bones of the face and cranial vault meet at sutural boundaries. These sutures are of great importance for craniofacial growth. Although the effects that the sutures have on modulating craniofacial strains have been investigated, how sutural fusion influences primate craniofacial biomechanics and adaptation are less considered. Confounding this problem is the lack of any systematic data on patterns of craniofacial sutural fusion from animals of known age and sex. This study examined the status of 28 sutures in Macaca mulatta skulls from a collection of animals of known age and sex from Cayo Santiago, Puerto Rico. Survival analysis showed that most animals died before all sutures fused. There was high variation in the age at which individual sutures or sutural sections were fused in M. mulatta, and significant differences in the amount of sutural fusion among regions and between males and females. Intensive fusion of sutures took place between ages 5 and 15. Sutures in the facial area tended to be less fused than in the cranial vault. Between adolescence and adulthood, males tended to have more sutural fusion than females, especially in the facial area. These differences might be biomechanical adaptations during ontogeny to craniofacial sexual dimorphism. These findings enrich our understanding of variation in sutural morphology in rhesus monkeys. Comparative information across primate species is essential for understanding the biomechanics of craniofacial form throughout primate evolution.

Do homoiologies impede phylogenetic analyses of the fossil hominids? An assessment based on extant papionin craniodental morphology

Homoiologies are phylogenetically misleading resemblances among taxa that can be attributed to phenotypic plasticity. Recently, it has been claimed that homoiologies are widespread in the hominid skull, especially in those regions affected by mastication-related strain, and that their prevalence is a major reason why researchers have so far been unable to obtain a reliable estimate of hominid phylogeny. To evaluate this "homoiology hypothesis", we carried out analyses of a group of extant primates for which a robust molecular phylogeny is available-the papionins. We compiled a craniometric dataset from measurements that differ in their susceptibility to mastication-related strain according to developmental considerations and experimental evidence. We used the coefficient of variation and analysis of variance with post hoc least significant difference comparisons in order to evaluate the variability of the measurements. The prediction from the homoiology hypothesis was that dental measurements, which do not remodel in response to strain, should be less variable than low-to-moderate-strain measurements, and that the latter should be less variable than high-strain measurements. We then performed phylogenetic analyses using characters derived from the measurements and compared the resulting phylogenetic hypotheses to the group's consensus molecular phylogeny. The prediction was that, if the homoiology hypothesis is correct, the agreement between the craniometric and molecular phylogenies would be best in the analyses of dental characters, intermediate in the analyses of low-to-moderate-strain characters, and least in the analyses of high-strain characters. The results of this study support the suggestion that mastication-related mechanical loading can result in variation in hominid cranial characters. However, they do not support the hypothesis that homoiology is a major reason why phylogenetic analyses of hominid crania have so far yielded conflicting and weakly supported hypotheses of relationship. These findings are consistent with a recent test of the homoiology hypothesis using craniodental data from extant hominoids, and cast doubt on the validity of the homoiology hypothesis, as originally formulated.

Using finite-element analysis to investigate suture morphology: a case study using large carnivorous dinosaurs

Finite-element analysis (FEA) can be used to investigate the mechanical significance of sutures and regions of intracranial flexibility in skulls. By modeling the stress response to feeding forces in a finite-element skull model (with appropriate boundary conditions), one can compare the axis of distortion and orientation of stress and strain in the model to the degree of movement at actual sutural contacts in the real skull. Hypotheses detailing the effect of introducing patency or flexibility on mechanical performance can be constructed and subsequently tested. In this study, the correlation between stress environment, cranial strength, and sutural morphology and mobility is investigated in the cranium of the large theropod dinosaur Allosaurus fragilis. Theropods are an especially interesting model system as their skulls were massive (over 100 cm in some cases), may have generated extremely large bite forces, yet patent sutures persisted between many of the facial bones. In this analysis, it was discovered that Allosaurus cranial sutures appear generally capable of accommodating stress and strain patterns generated during biting. This study highlights the potential of FEA in devising and testing hypotheses of form and function and argues that useful information can be obtained from finite-element models of extinct animals, providing that adequate assumptions are made and appropriate questions asked.

Cranial sutures and bones: growth and fusion in relation to masticatory strain

Cranial bones and sutures are mechanically loaded during mastication. Their response to masticatory strain, however, is largely unknown, especially in the context of age change. Using strain gages, this study investigated masticatory strain in the posterior interfrontal and the anterior interparietal sutures and their adjacent bones in 3- and 7-month-old miniature swine (Sus scrofa). Double-fluorochrome labeling of these animals and an additional 5-month group was used to reveal suture and bone growth as well as features of suture morphology and fusion. With increasing age, the posterior interfrontal suture strain decreased in magnitude and changed in pattern from pure compression to both compression and tension, whereas the interparietal suture remained in tension and the magnitude increased unless the suture was fused. Morphologically, the posterior interfrontal suture was highly interdigitated at 3 months and then lost interdigitation ectocranially in older pigs, whereas the anterior interparietal suture remained butt-ended. Mineralization apposition rate (MAR) decreased with age in both sutures and was unrelated to strain. Bone mineralization was most vigorous on the ectocranial surface of the frontal and the parietal bones. Unlike the sutures, with age bone strain remained constant while bone MARs significantly increased and were correlated with bone thickness. Fusion had occurred in the interparietal suture of some pigs. In all cases fusion was ectocranial rather than endocranial. Fusion appeared to be associated with increased suture strain and enhanced bone growth on the ectocranial surface. Collectively, these results indicate that age is an important factor for strain and growth of the cranium. .

Effects of food processing on masticatory strain and craniofacial growth in a retrognathic face

Changes in the technology of food preparation over the last few thousand years (especially cooking, softening, and grinding) are hypothesized to have contributed to smaller facial size in humans because of less growth in response to strains generated by chewing softer, more processed food. While there is considerable comparative evidence to support this idea, most experimental tests of this hypothesis have been on non-human primates or other very prognathic mammals (rodents, swine) raised on hard versus very soft (nearly liquid) diets. Here, we examine facial growth and in vivo strains generated in response to raw/dried foods versus cooked foods in a retrognathic mammal, the rock hyrax (Procavia capensis). The results indicate that the hyrax cranium resembles the non-human primate cranium in having a steep gradient of strains from the occlusal to orbital regions, but differs from most non-anthropoids in being primarily twisted; the hyrax mandible is bent both vertically and laterally. In general, higher strains, as much as two-fold at some sites, are generated by masticating raw versus cooked food. Hyraxes raised on cooked food had significantly less growth (approximately 10%) in the ventral (inferior) and posterior portions of the face, where strains are highest, resembling many of the differences evident between humans raised on highly processed versus less processed diets. The results support the hypothesis that food processing techniques have led to decreased facial growth in the mandibular and maxillary arches in recent human populations.

Effects of masticatory muscle function on craniofacial morphology in growing ferrets (Mustela putorius furo)

Studying the effects of masticatory muscle function on craniofacial morphology in animal models with different masticatory systems is important for further understanding of related issues in humans. Forty 5-wk-old male ferrets were equally divided into two groups. One group was fed a diet of hard pellets (HDG) and the other group was fed the same diet but softened with water (SDG). Lateral and dorsoventral cephalograms were taken on each group after 6 months. Cephalometric measurements were performed by digital procedures. For SDG ferrets, the hard palate plane was more distant from the cranial base plane, and canines were more proclined compared with HDG ferrets. The SDG ferrets were also found to have smaller interfrontal and interparietal widths, and a slenderer zygomatic arch than the HDG ferrets. In the mandible, the coronoid process was generally shorter and narrower for the SDG ferrets. The effects of the altered masticatory muscle function on craniofacial morphology in growing ferrets seemed to differ from those previously reported in other animal models studied under similar experimental conditions. Such differences in the effects are presumably related to the differences in the mode of mastication, craniofacial anatomy and growth pattern in different animal models.

Effects of increased muscle mass on mouse sagittal suture morphology and mechanics

The purpose of this study is to test predicted form-function relationships between cranial suture complexity and masticatory muscle mass and biomechanics in a mouse model. Specifically, to test the hypothesis that increased masticatory muscle mass increases sagittal suture complexity, we measured the fractal dimension (FD), temporalis mass, and temporalis bite force in myostatin-deficient (GDF8(-/-)) mice and wild-type CD-1 mice (all male, 6 months old). Myostatin is a negative regulator of muscle mass, and myostatin-deficient mice show a marked increase in muscle mass compared to normal mice. We predicted that increased sagittal suture complexity would decrease suture stiffness. The data presented here demonstrate that increased suture complexity (measured as FD) was observed in a hypermuscular mouse model (GDF8(-/-)) with significantly increased temporalis muscle mass and bite forces. Hypermuscular mice were also found to possess suture connective tissue that was less stiff (i.e., underwent more displacement before failure occurred) when loaded in tension. By decreasing stiffness, suture complexity apparently helps to dissipate mechanical loads within the cranium that are related to chewing. These results suggest that cranial suture connective tissue locally adapts to functional demands of the biomechanical suture environment. As such, cranial sutures provide a novel model for studies in connective tissue mechanotransduction.

At the feet of the dinosaurs: the early history and radiation of lizards

Lizards, snakes and amphisbaenians together constitute the Squamata, the largest and most diverse group of living reptiles. Despite their current success, the early squamate fossil record is extremely patchy. The last major survey of squamate palaeontology and evolution was published 20 years ago. Since then, there have been major changes in systematic theory and methodology, as well as a steady trickle of new fossil finds. This review examines our current understanding of the first 150 million years of squamate evolution in the light of the new data and changing ideas. Contrary to previous reports, no squamate fossils are currently documented before the Jurassic. Nonetheless, indirect evidence predicts that squamates had evolved by at least the middle Triassic, and had diversified into existing major lineages before the end of this period. There is thus a major gap in the squamate record at a time when key morphological features were evolving. With the exception of fragmentary remains from Africa and India, Jurassic squamates are known only from localities in northern continents (Laurasia). The situation improves in the Early Cretaceous, but the southern (Gondwanan) record remains extremely poor. This constrains palaeobiogeographic discussion and makes it difficult to predict centres of origin for major squamate clades on the basis of fossil evidence alone. Preliminary mapping of morphological characters onto a consensus tree demonstrates stages in the sequence of acquisition for some characters of the skull and postcranial skeleton, but many crucial stages--most notably those relating to the acquisition of squamate skull kinesis--remain unclear.

Biomechanics of the rostrum and the role of facial sutures

The rostrum is a large diameter, thin-walled tubular structure that receives loads from the teeth. The rostrum can be conceptualized both as a rigid structure and as an assemblage of several bones that interface at sutures. Using miniature pigs, we measured in vivo strains in rostral bones and sutures to gain a better understanding of how the rostrum behaves biomechanically. Strains in the premaxillary and nasal bones were low but the adjacent maxillary-premaxillary, internasal, and intermaxillary suture strains were larger by an order of magnitude. While this finding emphasizes the composite nature of the rostrum, we also found evidence in the maxillary and nasal bones for rigid structural behavior. Namely, maxillary strain is consistent with a short beam model under shear deformation from molar loading. Strain in the nasal bones is only partially supported by a long beam model; rather, a complex pattern of dorsal bending of the rostrum from incisor contact and lateral compression is suggested. Torsion of the maxilla is ruled out due to the bilateral occlusion of pigs and the similar working and balancing side strains, although it may be important in mammals with a unilateral bite. Torsional loading does appear important in the premaxillae, which demonstrate working and balancing side changes in strain orientation. These differences are attributed to asymmetrical incisor contact occurring at the end of the power stroke.

Comparative analysis of methods for determining bite force in the spiny dogfishSqualus acanthias

Many studies have identified relationships between the forces generated by the cranial musculature during feeding and cranial design. Particularly important to understanding the diversity of cranial form amongst vertebrates is knowledge of the generated magnitudes of bite force because of its use as a measure of ecological performance. In order to determine an accurate morphological proxy for bite force in elasmobranchs, theoretical force generation by the quadratomandibularis muscle of the spiny dogfish Squalus acanthias was modeled using a variety of morphological techniques, and lever-ratio analyses were used to determine resultant bite forces. These measures were compared to in vivo bite force measurements obtained with a pressure transducer during tetanic stimulation experiments of the quadratomandibularis. Although no differences were found between the theoretical and in vivo bite forces measured, modeling analyses indicate that the quadratomandibularis muscle should be divided into its constituent divisions and digital images of the cross-sections of these divisions should be used to estimate cross-sectional area when calculating theoretical force production. From all analyses the maximum bite force measured was 19.57 N. This relatively low magnitude of bite force is discussed with respect to the ecomorphology of the feeding mechanism of S. acanthias to demonstrate the interdependence of morphology, ecology, and behavior in organismal design.

Mechanical properties of the periosteum in the pig, Sus scrofa

The fibrous periosteum forms an intermediary between muscle and ligament forces and the underlying osteoblastic tissue, thus the mechanical properties of the periosteum are critical to understanding osteogenic stimuli. Regional and directional variation in periosteal properties may contribute to the biomechanical regulation of growth in some bones. Periostea of the pig mandibular body, zygomatic arch and metacarpal were loaded to failure under continuous tension. Each tissue type was tested in both the long-axis and transverse orientation. Stiffness, peak stress and peak strain were compared between orientations and among regions. Within the zygomatic periosteum there was little indication of regional difference, and neither zygomatic nor mandibular periosteum showed directional differences. The metacarpal periosteum showed a directional effect only in peak strain, which was greater longitudinally than transversely. There were striking differences, however, among the periostea of the three bones. The zygomatic arch periosteum was the stiffest tissue (91.7+/-30.5 MPa) and showed the highest strength (12.3+/-4.6 MPa). The metacarpal periosteum demonstrated slightly lower stiffness and strength (84.7+/-35.1 and 11.3+/-5.3 MPa), and peak strains in zygomatic and metacarpal periostea were similarly high (17.7+/-3.7 and 17.9+/-3.7 MPa, respectively). The periosteum of the mandibular body was the most deformable tissue (63.0+/-25.4 MPa), with the lowest-peak strain (15.6+/-3.0 MPa) and the least strength (8.2+/-4.1 MPa). These results correspond with those of previous work in long bones, in that periosteum interfacing with ligament or muscle (e.g. zygomatic, metacarpal) demonstrates greater stiffness and strength than periosteum adjacent to loose connective tissue (e.g. mandibular body). Therefore, the degree to which the periosteal tissue serves as a functional interface between bone and muscle is reflected in the different failure properties of periostea from different bones. The structural fortification of the zygomatic arch periosteum relative to other periosteal tissues suggests a role for the periosteum in stabilizing the zygomatic arch-muscle functional complex. On the other hand, the similar failure properties of zygomatic and squamosal periostea from the zygomatic arch mean that the differential growth of these bones cannot be attributed to mechanical stimuli intrinsic to the periosteal tissue.

Transmission of bone strain in the craniofacial bones of edentulous human skulls upon dental implant loading

STATEMENT OF PROBLEM

Little is known about how craniofacial bones that are distant from dental implants are loaded. Whether bone experiences different strain when implants of different diameters are loaded is unknown.

PURPOSE

This study was designed to (1) characterize bone strain both adjacent to and distant from dental implants and (2) compare bone strain in response to the same loads on small-diameter and large-diameter implants.

MATERIAL AND METHODS

On 4 edentulous, dry adult human skulls, the buccopalatal midpoint of the edentulous occlusal surface was marked unilaterally in the maxillary first molar area with a round bur. A hole for implant placement was prepared, and 2 self-tapping titanium implants (3.75 x 7 mm and 4 x 7 mm) were placed in the same location and at the same orientation, one after the other. A 4-mm-long titanium abutment was connected to the implant. Each implant was loaded 10 degrees lateral to its longitudinal axis, simulating a lateral occlusal force in 3 of the skulls. In skull 2, loading was along the longitudinal axis of the implant and simulated a vertical occlusal force. The magnitude of the ramp forces was 0 to 100 N. Uniaxial strain gages and/or 3-element strain rosettes were implanted in the supramolar cortical bone, the supraincisor cortical bone, the zygomaticomaxillary suture, and the zygomaticotemporal suture. All strain gages/rosettes were excited with 500 mV DC, and the output signals were recorded with a strain conditioner. Tensile strain was expressed as positive values and compressive strain as negative values. Student t tests were used to test for normal distribution of bone strain within each skull; Wilcoxon tests were applied for skewed distribution between small- and large-diameter implants and between 50-N and 100-N loads (P<or=.05).

RESULTS

Bone strain both adjacent to and distant from the implants was complex: compressive strain in the buccal cortical bone superior to the implants; tensile strain in the ipsilateral supraincisor cortical bone but compressive strain in the contralateral supraincisor cortical bone; and tensile strain anterior to the zygomaticotemporal suture but compressive strain posterior to the suture. With the same applied loads, bone strain was higher for large-diameter implants than for small-diameter implants for all the above cortical locations (P<.01 to.001) except posterior to the zygomaticotemporal suture.

CONCLUSION

Within the limitations of this study, bone strain resulting from dental implant loading was distributed to cortices not only adjacent to but also distant from dental implants. The large-diameter implant was more facilitative of stress transfer to cortical bone than the small-diameter implant tested.

Future directions for the analysis of musculoskeletal design and locomotor performance

New techniques and conceptual frameworks offer new challenges and exciting opportunities for research on the biomechanics and physiology of vertebrate musculoskeletal design and locomotor performance. Past research based on electromyography and two-dimensional kinematics has greatly advanced the field of vertebrate functional morphology. Studies using these approaches have revealed much about vertebrate structure and function and have emphasized the importance of incorporating historical and developmental constraint and ecological context. Continued use of these experimental tools, but with greater emphasis on three-dimensional analysis of body movement, in combination with 3D kinetics and flow visualization of fluid movement past moving organisms, can now take advantage of the considerable advances in computing power and digital video technology. Indeed, surprisingly few detailed 3D analyses of movement for many locomotor modes and differing organisms are presently available. A challenge of 3D analyses will be to reduce the complexity of the data obtained in order to identify general principles of movement and biomechanics. New techniques and approaches for measuring muscle forces and length changes, together with activation patterns and movement, under dynamic conditions of more varied motor behavior are now also available. These provide the opportunity to study the mechanics and physiology of muscle function at greater depth and under more realistic conditions than has been previously possible. The importance of studying intact, behaving organisms under a broader range of locomotor conditions (other than steady state) and in the context of their natural environment remains a critical need for vertebrate biologists. This provides the much-needed opportunity for placing advances at more cellular and molecular levels into the context of whole organism function. Hence, studies at the organismal level remain paramount.

Jaw muscles and the skull in mammals: the biomechanics of mastication

Among non-mammalian vertebrates, rigid skulls with tight sutural junctions are associated with high levels of cranial loading. The rigid skulls of mammals presumably act to resist the stresses of mastication. The pig, Sus scrofa, is a generalized ungulate with a diet rich in resistant foods. This report synthesizes previous work using strain gages bonded to the bones and sutures of the braincase, zygomatic arch, jaw joint, and mandible with new studies on the maxilla. Strains were recorded during unrestrained mastication and/or in anesthetized pigs during muscle stimulation. Bone strains were 100-1000 micro epsilon, except in the braincase, but sutural strains were higher, regardless of region. Strain regimes were specific to different regions, indicating that theoretical treatment of the skull as a unitary structure is probably incorrect. Muscle contraction, especially the masseter, caused strain patterns by four mechanisms: (1) direct loading of muscle attachment areas; (2) a compressive reaction force at the jaw joint; (3) bite force loading on the snout and mandible; and (4) movement causing new points of contact between mandible and cranium. Some expected patterns of loading were not seen. Most notably, strains did not differ for right and left chewing, perhaps because pigs have bilateral occlusion and masseter activity.

In vivo function of the craniofacial haft: the interorbital "pillar"

The craniofacial haft resists forces generated in the face during feeding, but the importance of these forces for the form of the craniofacial haft remains to be determined. In vivo bone strain data were recorded from the medial orbital wall in an owl monkey (Aotus), rhesus macaques (Macaca mulatta), and a galago (Otolemur) during feeding. These data were used to determine whether: the interorbital region can be modeled as a simple beam under bending or shear; the face is twisting on the brain case during unilateral biting or mastication; the interorbital "pillar" is being axially compressed during incisor loading and both axially compressed and laterally bent during mastication; and the interorbital "pillar" transmits axial compressive forces from the toothrow to the braincase. The strain data reveal that the interorbital region cannot be modeled as a anteroposteriorly oriented beam bent superiorly in the sagittal plane during incision or mastication. The strain orientations recorded in the majority of experiments are concordant with those predicted for a short beam under shear, although the anthropoids displayed evidence of multiple loading regimes in the medial orbital wall. Strain orientation data corroborate the hypothesis that the strepsirrhine face is twisted during mastication. The hypothesis that the interorbital region is a member in a rigid frame subjected to axial compression during mastication receives some support. The hypothesis that the interorbital region is a member in a rigid frame subjected to lateral bending during mastication is supported by the epsilon1/absolute value epsilon2 ratio data but not by the strain orientation data. The timing of peak shear strains in the medial orbital wall of anthropoids does not bear a consistent relationship to the timing of peak shear strain in the mandibular corpus, suggesting that bite force is not the only external force influencing the medial orbital wall. Strain orientation data suggest the existence of two distinct loading regimes, possibly associated with masseter or medial pterygoid contraction. Regardless of the loading regime, all taxa showed low strain magnitudes in the medial orbital wall relative to the anterior root of the zygoma and the mandibular corpus. The strain gradients documented here and elsewhere suggest that, in anthropoids at least, local effects of external forces are more important than a single global loading regime. The low strain magnitudes in the medial orbital wall and in other thin bony plates around the orbit suggest that these structures are not optimally designed for resisting feeding forces. It is hypothesized that their function is to provide rigid support and protection for soft-tissue structures such as the nasal epithelium, the brain, meninges, and the eye and its adnexa. In contrast with the face of Otolemur, which appears to be subjected to a single predominant loading regime, anthropoids may experience different loading regimes in different parts of the face. This implies that the anthropoid and strepsirrhine facial skulls might be optimized for different functions.

Craniodental variation in Paranthropus boisei: a developmental and functional perspective

What levels and patterns of craniodental variation among a fossil hypodigm are necessary to reject the null hypothesis that only a single species is sampled? We suggest how developmental and functional criteria can be used to predict where in the skeleton of fossil hominins we should expect more, or less, within-species variation. We present and test three hypotheses about the factors contributing to craniodental variation in extant primate taxa, and then apply these results to the interpretation of the P. boisei hypodigm. Within the comparative samples of extant Homo, Pan, Gorilla, Pongo, and Colobus, variables from the cranial base, neurocranium, and face that are not subject to high magnitudes of strain have consistently lower levels of intraspecific variation than variables from regions of the face subject to high levels of strain. Dental size variables are intermediate in terms of their reliability. P. boisei is found to have a low degree of variability relative to extant primates for variables shown to be generally useful for testing taxonomic hypotheses. Contrary to the claims of Suwa et al. ([1997] Nature 389:489-492), the recently discovered material from Konso falls within the range of variation of the "pre-Konso" hypodigm of P. boisei for available conventional metrical variables. Those aspects of the Konso material that appear to extend the range of the P. boisei hypodigm involve regions of the skull predicted to be prone to high levels of within-species variation. The approach used in this study focuses on craniodental data, but it is applicable to other regions of the skeleton.

Strain in the braincase and its sutures during function

The skull is distinguished from other parts of the skeleton by its composite construction. The sutures between bony elements provide for interstitial growth of the cranium, but at the same time they alter the transmission of stress and strain through the skull. Strain gages were bonded to the frontal and parietal bones of miniature pigs and across the interfrontal, interparietal and coronal sutures. Strains were recorded 1) during natural mastication in conjunction with electromyographic activity from the jaw muscles and 2) during stimulation of various cranial muscles in anesthetized animals. Vault sutures exhibited vastly higher strains than did the adjoining bones. Further, bone strain primarily reflected torsion of the braincase set up by asymmetrical muscle contraction; the tensile axis alternated between +45 degrees and -45 degrees depending on which diagonal masseter/temporalis pair was most active. However, suture strains were not related to overall torsion but instead were responses to local muscle actions. Only the coronal suture showed significant strain (tension) during jaw opening; this was caused by the contraction of neck muscles. All sutures showed strain during jaw closing, but polarity depended on the pattern of muscle usage. For example, masseter contraction tensed the coronal suture and the anterior part of the interfrontal suture, whereas the temporalis caused compression in these locations. Peak tensile strains were larger than peak compressive strains. Histology suggested that the skull is bent at the sutures, with the ectocranial surface tensed and the endocranial surface predominantly compressed. Collectively, these results indicate that skulls with patent sutures should be analyzed as complexes of independent parts rather than solid structures.

Why fuse the mandibular symphysis? A comparative analysis

Fused symphyses, which evolved independently in several mammalian taxa, including anthropoids, are stiffer and stronger than unfused symphyses. This paper tests the hypothesis that orientations of tooth movements during occlusion are the primary basis for variations in symphyseal fusion. Mammals whose teeth have primarily dorsally oriented occlusal trajectories and/or rotate their mandibles during occlusion will not benefit from symphyseal fusion because it prevents independent mandibular movements and because unfused symphyses transfer dorsally oriented forces with equal efficiency; mammals with predominantly transverse power strokes are predicted to benefit from symphyseal fusion or greatly restricted mediolateral movement at the symphysis in order to increase force transfer efficiency across the symphysis in the transverse plane. These hypotheses are tested with comparative data on symphyseal and occlusal morphology in several mammals, and with kinematic and EMG analyses of mastication in opossums (Didelphis virginiana) and goats (Capra hircus) that are compared with published data on chewing in primates. Among mammals, symphyseal fusion or a morphology that greatly restricts movement correlates significantly with occlusal orientation: species with more transversely oriented occlusal planes tend to have fused symphyses. The ratio of working- to balancing-side adductor muscle force in goats and opossums is close to 1:1, as in macaques, but goats and opossums have mandibles that rotate independently during occlusion, and have predominantly vertically oriented tooth movements during the power stroke. Symphyseal fusion is therefore most likely an adaptation for increasing the efficiency of transfer of transversely oriented occlusal forces in mammals whose mandibles do not rotate independently during the power stroke.

Ontogeny of histochemical fiber types and muscle function in the masseter muscle of miniature swine

In this study of masticatory maturation, the ontogeny of the histochemical fiber type composition of musculus masseter is examined in the omnivorous miniature swine (Sus scrofa). Fiber type characteristics are interpreted by comparison with electromyography (EMG) recorded during feeding behavior. Similar to locomotion studies, the results suggest a correspondence between the composition and arrangement of motor units and their recruitment pattern. Serial sections of masseter muscles from 10 minipigs, ranging from 2 weeks to slightly over 1 year of age, were stained for myosin adenosine triphosphatase (mATPase) activity to distinguish slow-twitch from fast-twitch fibers, and for nicotinamide adenosine dehydrogenase-tetrazolium reductase to assess the aerobic capacity of the same fibers. Although maintaining a uniformly high aerobic capacity throughout ontogeny and in adult animals, a transition is observed in the relative proportions of fast- and slow-twitch fibers. The primarily fast-twitch neonatal pig masseter eventually comprises approximately 25-30% slow-twitch fibers in adults, with a higher predominance of slow fibers in the deep (vs. superficial) and anterior (vs. posterior) regions of the muscle. Furthermore, while individual fibers of adult masseters generally stain for either alkaline- or acid-stable mATPase activity, a substantial proportion of cells in developing animals exhibits the presence of both isozymes. EMG results indicate functional heterogeneity within the masseter of adult pigs. During chewing, when pig chow is replaced by cracked corn, EMG activity in the deep portion of the muscle either decreases or increases slightly. In the superficial portion, however, muscle amplitudes become dramatically higher for corn, surpassing levels generated for chewing the less obdurate chow. These results are consistent with a behavioral transition from neonatal suckling to sustained mastication of foods of more complex textures eaten by adult pigs. The relationship between these fiber type and EMG results for pig masseter corresponds to those pertaining to motor unit recruitment in the extensor muscles of locomotion. Implications of this work for the evolutionary morphology of mastication also are discussed.

Three-dimensional loading and growth of the zygomatic arch

Despite a number of previous biomechanical studies on the zygomatic arch, unanswered questions remain about its three-dimensional loading and growth. Using young miniature swine, we have for the first time recorded strains from both the medial and lateral aspects of the squamosal bone during mastication and masseter muscle stimulation. Strains from the zygomatic bone flange and zygomatic arch growth data were also obtained from the same animals. A second study on a younger group of animals examined the growth of the zygomatic flange following partial removal of the masseter. Strain data indicated that the squamosal bone is bent out-of-plane and that this pattern of loading is quite different from that of the adjacent zygomatic bone, which experiences much lower strains with little evidence of out-of-plane bending. Surprisingly, strains were higher in the zygomatic flange during contralateral chews and contralateral masseter stimulations than during ipsilateral chews/stimulations. These strains proved to arise from movement of the condyle, explaining why partial removal of the masseter had little effect on the growth of the flange. Other growth results indicated an approximately threefold greater rate of subperiosteal deposition on the lateral surface of the squamosal bone than on the zygomatic bone. This difference in growth rate is attributed to the presence of sutures that contribute to the lateral displacement of the zygomatic bone but not the squamosal bone. This explanation does not exclude the possibility that the rapid apposition on the lateral squamosal surface is regulated by the high surface strains that result from out-of-plane bending.

Increased in vivo levels of neurotransmitters to trigeminal motoneurons: effects on craniofacial bone and TMJ

The results of chronic, in vivo delivery of excitatory and inhibitory neurotransmitter substances upon the craniofacial skeleton are of ongoing interest to clinician and basic scientist alike. Our purpose was to document and compare the effects of biodegradable glycine, glutamate, and thyrotropin-releasing hormone (TRH) microspheres upon the craniofacial skeleton and TMJ of actively growing rats. Glycine, glutamate, TRH, and blank microspheres were stereotactically implanted in proximity to motoneurons within the trigeminal motor nucleus in order to test the following null hypotheses: (1) neurotransmitter microspheres implanted near trigeminal motoneurons of growing rats have no significant effect on the craniofacial skeleton and temporomandibular joints of implanted animals, and (2) there are no significant differences between the relative effects of glutamate, TRH (excitatory to trigeminal motoneurons), and glycine (inhibitory to trigeminal motoneurons) implants upon the craniofacial skeleton and temporomandibular joint. Fifty male Sprague-Dawley rats underwent stereotactic neurosurgery at 35 days; five rats each were killed at 14 and 21 days postoperative for data collection and comparison between glycine-, glutamate-, TRH-, blank-microsphere, and sham-surgery rats. Glycine rats had significantly (P < or = 0.05, 0. 01) smaller implant-side cranial dimensions and mandibular condyles, all glycine rats showed increased gracility of implant-side bones, and deviation of their facial skeleton away from the implant-side; this was in contrast to the generally larger implant-side bony structures in both glutamate and TRH rats. The two null hypotheses were both rejected. Due to their inhibitory and excitatory effects upon trigeminal motoneurons, masticatory muscles, and their neuromuscular generation of biomechanical forces that affect bone, the neurotransmitter substances glycine, glutamate, and TRH appear to play an important role in the growth and development of the mammalian craniofacial skeleton and TMJ.

Craniofacial sutures: morphology, growth, and in vivo masticatory strains

The growth and morphology of craniofacial sutures are thought to reflect their functional environment. However, little is known about in vivo sutural mechanics. The present study investigates the strains experienced by the internasal, nasofrontal, and anterior interfrontal sutures during masticatory activity in 4-6-month-old miniature swine (Sus scrofa). Measurements of the bony/fibrous arrangements and growth rates of these sutures were then examined in the context of their mechanical environment. Large tensile strains were measured in the interfrontal suture (1,036 microepsilon +/- 400 SD), whereas the posterior internasal suture was under moderate compression (-440 microepsilon +/- 238) and the nasofrontal suture experienced large compression (-1,583 microepsilon +/- 506). Sutural interdigitation was associated with compressive strain. The collagen fibers of the internasal and interfrontal sutures were clearly arranged to resist compression and tension, respectively, whereas those of the nasofrontal suture could not be readily characterized as either compression or tension resisting. The average linear rate of growth over a 1-week period at the nasofrontal suture (133.8 micrometer, +/- 50.9 S.D) was significantly greater than that of both the internasal and interfrontal sutures (39.2 micrometer +/- 11.4 and 65. 5 micrometer +/- 14.0, respectively). Histological observations suggest that the nasofrontal suture contains chondroid tissue, which may explain the unexpected combination of high compressive loading and rapid growth in this suture.

Rigid fixation and strain patterns in the pig zygomatic arch and suture

PURPOSE

In orthognathic surgery, rigid fixation is routinely used to hold together bone fragments that may experience heavy force from attached masticatory muscles. Internal fixation plates are assumed to hold bony parts rigidly, but the mobility at such sites subjected to normal masticatory function has not been measured. The purpose of this study was to investigate in vivo the degree to which a linear plate immobilizes separated bones, specifically sutures.

MATERIALS AND METHODS

Three female miniature pigs (Sus scrofa) had 1.3-mm Synthes titanium plates placed across the suture in the zygomatic arch. Foil strain gauges were used to record load deformation in the zygomatic and squamosal (temporal) bones and across the vertical and horizontal parts of the suture. Strain was recorded in vivo during mastication and in anesthetized pigs with electrical stimulation of masticatory muscles.

RESULTS

Strain at the suture was not reduced from normal levels. The plate induced increases in strain within the bones, but the changes were slight.

CONCLUSION

The results indicate that linear "rigid fixation" does not immobilize sutures.

In vivo bone strain patterns in the zygomatic arch of macaques and the significance of these patterns for functional interpretations of craniofacial form

It has been proposed that the mammalian facial skeleton is optimized for countering or dissipating masticatory stress. As optimized load-bearing structures by definition exhibit maximum strength with a minimum amount of material, this hypothesis predicts that during chewing and biting there should be relatively high and near uniform amounts of strain throughout the facial skeleton. If levels of strain in certain areas of the facial skeleton are relatively low during these behaviors, this indicates that the amount of bone mass in these areas could be significantly reduced without resulting in the danger of structural failure due to repeated masticatory loads. Furthermore, and by definition, this indicates that these areas are not optimized for countering masticatory stress, and instead their overall morphology and concentration of bone mass has most likely been selected or influenced mainly by factors unrelated to the dissipation or countering of chewing and biting forces. An analysis of in vivo bone strain along the lateral aspect of the zygomatic arch of macaques indicates the clear absence of a high and near uniform strain environment throughout its extent. Instead, there is a steep strain gradient along the zygomatic arch, with the highest strains along its anterior portion, intermediate strains along its middle portion, and the lowest strains along its posterior portion. These data, in combination with earlier published data (Hylander et al., 1991), indicate that levels of functional strains during chewing and biting are highly variable from one region of the face to the next, and therefore it is unlikely that all facial bones are especially designed so as to minimize bone tissue and maximize strength for countering masticatory loads. Thus, the functional significance of the morphology of certain facial bones need not necessarily bear any important or special relationship to routine and habitual cyclical mechanical loads associated with chewing or biting. Furthermore, the presence of these steep strain gradients within the facial skeleton suggests that the amount of bone mass in the low-strain areas may be largely determined by factors unrelated to processes frequently referred to as "functional adaptation," or conversely, that the "optimal strain environment" of bone varies enormously throughout the facial skeleton (cf., Rubin et al., 1994). Based solely on anatomical considerations, it is likely that the zygomatic arch is bent in both the parasagittal and transverse planes and twisted about its long axis. Due to constraints on rosette position, the strain data are incapable of determining if one or more of these loading conditions predominate. Instead, the strain data simply provide limited support for the possible presence of all of these loading regimes. Finally, as the masseter muscle is concentrated along the anterior portion of the zygomatic arch and as the arch has fixed ends, the largest shearing forces and the largest bending and twisting moments are located along its anterior portion. This in turn explains why the largest strains are found along the anterior portion of the zygomatic arch.

Patterns of bone strain in the zygomatic arch

BACKGROUND

The transmission of force through the skull is complicated by the irregular form of the bones, the interposed sutures, and the multiplicity of loads from the teeth, muscles, and environment. The in vivo relationship between bone strain and muscle function in the mammalian skull is best investigated empirically.

METHODS

We studied the zygomatic arch of pigs (Sus scrofa) by simultaneous strain gauge recording and electromyography. Seventeen juvenile animals were used, employing multiple strain gauges arranged either in rosettes or strips. Strain was recorded during mastication and muscle stimulations. Bony architecture was examined on sectioned specimens.

RESULTS

Strain patterns were complex even in this beamlike structure. During masseteric contraction, the more anterior zygomatic bone showed in-plane bending such that its lower border became more convex, and the major principal strain axis (tension) was parallel to the masseter muscle. The posterior squamosal bone was slightly bent in the opposite direction, and the major principal strain was rotated 45-60 degrees from the masseteric line of action. Strain magnitudes in the squamosal were larger than those in the zygomatic. Woven bone composing the surface of the arch appeared denser in the zygomatic bone, where its predominant orientation corresponded with compressive strain. In the squamosal bone trabeculae were more regularly arranged, but their orientation did not correspond with strain axes.

CONCLUSIONS

The magnitude differences are probably related to the different architecture of the zygomatic and squamosal bones, whereas the different strain patterns primarily reflect the influence of the sutures in selectively damping or transmitting loads. In particular, the zygomatic bone may be loaded by three-point, distributed-load bending, whereas the squamosal, loaded at only two points, may be sheared. We conclude that each cranial bone functions in a unique strain environment, with the sutures serving to redirect loading.

Anatomic and directional variation in the mechanical properties of the mandibular condyle in pigs

Stereologic studies of trabecular architecture suggest that the pig mandibular condyle is strongest when loaded supero-inferiorly, and that stress is concentrated in the antero-inferior region (Teng and Herring, 1995). To test these hypotheses, we investigated the uni-axial mechanical properties of 22 pig mandibular condyles in three loading directions at a mean strain rate of 0.14 (+/- 0.12)% s-1. A total of 91 rectangular beam specimens (averaging 9.0 mm x 6.0 mm x 5.0 mm) was tested. For each specimen, 5 or 6 non-destructive tests were performed before compressive failure. Strain in both longitudinal and transverse directions was measured by foil strain gauges on the central part of the specimen. Data were normalized at a strain rate of 0.1% s-1, specimen length of 9 mm, and cross-sectional area of 30.25 mm2. Generally, modulus of elasticity (E) and ultimate stress (sigma u) in the anterior regions of the condyle were greater than those in the posterior. E, sigma u, and Poisson's ratio (upsilon) were significantly different among the test directions, but ultimate strain (epsilon u) was not. The highest values of E (4.04 GPa), sigma u (14.97 MPa), and rho (0.81 g/cm3) were seen in the anterior inferior/middle region under supero-inferior loading. The lowest values (0.94 GPa for E, 2.38 MPa for sigma u, and 0.52 g/cm3 for rho) were found in the inferior/posterior region in medio-lateral loading. Although the mechanical properties of the condyle vary depending upon location, these results verify that the condyle is strongest and stiffest under compressive loads in the supero-inferior direction, and that the anterior-inferior region is particularly strong and stiff.

In vivo and in vitro bone strain in the owl monkey circumorbital region and the function of the postorbital septum

Anthropoids and tarsiers are the only vertebrates possessing a postorbital septum. This septum, formed by the frontal, alisphenoid, and zygomatic bones, separates the orbital contents from the temporal muscles. Three hypotheses suggest that the postorbital septum evolved to resist stresses acting on the skull during mastication or incision. The facial-torsion hypothesis posits that the septum resists twisting of the face about a rostrocaudal axis during unilateral mastication; the transverse-bending hypothesis argues that the septum resists caudally directed forces acting at the lateral orbital margin during mastication or incision; and the tension hypothesis suggests that the septum resists ventrally directed components of masseter muscle force during mastication and incision. This study evaluates these hypotheses using in vitro and in vivo bone strain data recorded from the circumorbital region of owl monkeys. Incisor loading of an owl monkey skull in vitro bends the face upward in the sagittal plane, compressing the interorbital region rostrocaudally and "buckling" the lateral orbital walls. Unilateral loading of the toothrow in vitro also bends the face in the sagittal plane, compressing the interorbital region rostrocaudally and buckling the working side lateral orbital wall. When the lateral orbital wall is partially cut, so as to reduce the width of its attachment to the braincase, the following changes in circumorbital bone strain patterns occur. During loading of the incisors, lower bone strain magnitudes are recorded in the interorbital region and lateral orbital walls. In contrast, during unilateral loading of the P3, higher bone strain magnitudes are observed in the interorbital region, and generally lower bone strain magnitudes are observed in the lateral orbital walls. During unilateral loading of the M2, higher bone strain magnitudes are observed in both the interorbital region and in the lateral orbital wall ipsilateral to the loaded molar. Comparisons of the in vitro results with data gathered in vivo suggest that, during incision and unilateral mastication, the face is subjected to upward bending in the sagittal plane resulting in rostrocaudal compression of the interorbital region. Modeling the lateral orbital walls as curved plates suggests that during mastication the working side wall is buckled due to the dorsally directed component of the maxillary bite force which causes upward bending of the face in the sagittal plane. The balancing side lateral orbital wall may also be buckled due to upward bending of the face in the sagittal plane as well as being twisted by the caudoventrally directed components of the superficial masseter muscle force. The in vivo data do not exclude the possibility that the postorbital septum functions to improve the structural integrity of the postorbital bar during mastication. However, there is no reason to believe that a more robust postorbital bar could not also perform this function. Hypotheses stating that the postorbital septum originally evolved to reinforce the skull against routine masticatory loads must explain why, rather than evolving a postorbital septum, the stem anthropoids did not simply enlarge their postorbital bars.

Sutural effects of fronto-occipital cranial modification

Maya adult crania from the site of Lamanai, Belize provide a retrospective means of examining growth processes in the cranial vault. The Lamanai population practiced fronto-occipital deformation which is found to be significantly associated with premature sagittal synostosis and wormian bones of the lambdoidal suture. The undeformed members of the population also exhibit an abnormally high frequency of sagittal synostosis, but a significantly lower frequency than the deformed sample. It is suggested that the deforming apparatus creates tensile forces on the sagittal suture during the peak period of growth of the parietals, and that these forces might induce an adaptive response important in producing premature sagittal synostosis. The undeformed sample may have an increased congenital risk of sagittal synostosis created by their natural brachycephalic morphology in utero. The frequency patterning of wormian bones suggests a mixture of genetic and environmental causes in which tensile forces may also play a role.

The role of sutures in normal and abnormal craniofacial growth

The paper is a shortened version of a paper read at the symposium on craniofacial growth, in which the literature on various aspects of sutures was reviewed. Suture development, structure, growth, and closure are covered, and the response of sutures to orthopedic forces and their role in craniosynostosis exemplified. Rather than being an extensive review, references are included preferably to present diversity in results and methods within the subtitle of the symposium, 'mechanisms and study methods'.

Sutural biology and the correlates of craniosynostosis

The purpose of this paper is to provide a new perspective on craniosynostosis by correlating what is known about sutural biology with the events of craniosynostosis per se. A number of key points emerge from this analysis: 1) Sutural initiation may take place by overlapping, which results in beveled sutures, or by end-to-end approximation, which produces nonbeveled, end-to-end sutures. All end-to-end sutures occur in the midline (e.g., sagittal and metopic) probably because embryonic biomechanical forces on either side of the initiating suture tend to be equal in magnitude. A correlate appears to be that only synostosed sutures of the midline have pronounced bony ridging. 2) Long-term histologic observations of the sutural life cycle call into question the number of layers within sutures. The structure varies not only in different sutures, but also within the same suture over time. 3) Few, if any, of the many elegant experimental research studies in the field of sutural biology have increased our understanding of craniosynostosis per se. An understanding of the pathogenesis of craniosynostosis requires a genetic animal model with primary craniosynostosis and molecular techniques to understand the gene defect. This may allow insight into pathogenetic mechanisms involved in primary craniosynostosis. It may prove to be quite heterogeneous at the basic level. 4) The relationship between suture closure, cessation of growth, and functional demands across sutures poses questions about various biological relationships. Two conclusions are provocative. First, cessation of growth does not necessarily, or always lead to fusion of sutures. Second, although patent sutures aid in the growth process, some growth can take place after suture closure. 5) In an affected suture, craniosynostosis usually begins at a single point and then spreads along the suture. This has been shown by serial sectioning and calls into question results of studies in which the affected sutures are only histologically sampled. 6) Craniosynostosis is etiologically and pathogenetically heterogeneous. Known human causes are reviewed. Is craniosynostosis simply normal suture closure commencing too early?(ABSTRACT TRUNCATED AT 400 WORDS)

Sutural complexity in artificially deformed human (Homo sapiens) crania

The pattern of complexity of cranial sutures is highly variable both among and within species. Intentional cranial vault deformation in human populations provides a controlled natural experiment by which we were able to quantify aspects of sutural complexity and examine the relationship between sutural patterns and mechanical loading. Measures of sutural complexity (interdigitation, number, and size of sutural bones) were quantified from digitized tracings of 13 sutures and compared among three groups of crania (n = 70) from pre-European contact Peru. These groups represent sample populations deformed in 1) anteroposterior (AP) and 2) circumferential (C) directions and 3) an undeformed population. Intergroup comparisons show few differences in degree or asymmetry of sutural interdigitation. In the few comparisons which show differences, the C group is always more interdigitated than the other two while the AP group has more sutural bones. The sutures surrounding the temporal bone (sphenotemporal, occipitotemporal, and temporoparietal) most frequently show significant differences among groups. These differences are related to the more extreme binding of C type deformation and are consistent with hypothesized increases in tension at coronally oriented sutures in this group. The larger number of sutural bones in the AP group is consistent with the general broadening of the cranium in this group and with experimental evidence indicating the development of ossicles in areas of tension. We suggest that so few changes in sutural complexity occurred either because the magnitude of the growth vectors, unlike their direction, is not substantially altered or because mechanisms other than sutural growth modification are responsible for producing the altered vault shapes. In addition, the presence of fontanelles in the infant skulls during binding and the static nature of the binding may have contributed to the similarity in complexity among groups.