Polyoxazolines for Nonfouling Surface Coatings - A Direct Comparison to the Gold Standard PEG

Plasma deposited poly-oxazoline nanotextured surfaces dictate osteoimmunomodulation towards ameliorative osteogenesis

Developing "osteoimmune-smart" bone substitute materials have become the forefront of research in bone regeneration. Biocompatible polymer coatings are applied widely to improve the bioactivity of bone substitute materials. In this context, polyoxazolines (Pox) have attracted substantial attention recently due to properties such as biocompatibility, stability, and low biofouling. In view of these useful properties, it is interesting to explore the capacity of Pox as an osteoimmunomodulatory agent to generate a favorable osteoimmune environment for osteogenesis. We applied a technique called plasma polymerization and succeeded in preparing Pox-like coatings (Ppox) and engineered their nanotopography at the nanoscale. We found that Ppox switched macrophages towards M2 extreme, thus inhibiting the release of inflammatory cytokines. The underlying mechanism may be related to the suppression of TLR pathway. The generated osteoimmune environment improved osteogenesis while inhibited osteoclastogenesis. This may be related to the release of osteogenic factors, especially Wnt10b from macrophages. The addition of nanotopography (16 nm, 38 nm, 68 nm) can tune the Ppox-mediated inhibition on inflammation and osteoclastic activities, while no significant effects were observed within the tested nano sizes on the Ppox-mediated osteogenesis. These results collectively suggest that Ppox can be useful as an effective osteoiumunomodulatory agent to endow bone substitute materials with favourable osteoimmunomodulatory property. STATEMENT OF SIGNIFICANCE: In this study, we succeeded in preparing plasma deposited Pox-like nano-coatings (Ppox) via plasma polymerization and found that Ppox nanotopographies are useful osteoimmunomodulatory tools. Their osteoimmunodolatory effects and underlying mechanisms are unveiled. It is the first investigation into the feasibility of applying poly-oxazoline as an osteoimmunomodulatory agent. This expand the application of poly-oxazoline into the forefront in bone regeneration area for the development of advanced "osteoimmune-smart" bone substitute materials.

Temperature-Dependent Rheological and Viscoelastic Investigation of a Poly(2-methyl-2-oxazoline)-b-poly(2-iso-butyl-2-oxazoline)-b-poly(2-methyl-2-oxazoline)-Based Thermogelling Hydrogel

The synthesis and characterization of an ABA triblock copolymer based on hydrophilic poly(2-methyl-2-oxazoline) (pMeOx) blocks A and a modestly hydrophobic poly(2-iso-butyl-2-oxazoline) (piBuOx) block B is described. Aqueous polymer solutions were prepared at different concentrations (1-20 wt %) and their thermogelling capability using visual observation was investigated at different temperatures ranging from 5 to 80 °C. As only a 20 wt % solution was found to undergo thermogelation, this concentration was investigated in more detail regarding its temperature-dependent viscoelastic profile utilizing various modes (strain or temperature sweep). The prepared hydrogels from this particular ABA triblock copolymer have interesting rheological and viscoelastic properties, such as reversible thermogelling and shear thinning, and may be used as bioink, which was supported by its very low cytotoxicity and initial printing experiments using the hydrogels. However, the soft character and low yield stress of the gels do not allow real 3D printing at this point.

Ecotoxicological impact of selected polyethylenimines toward their potential application as nitrogen fertilizers with prolonged activity

Poly(2-oxazoline) polymers have found extensive application in the preparation of microcapsules for biomedical purposes. However, there is a scarcity of information related to their ecotoxicological assessment. Therefore, in this study, we focused on the ecotoxicity of selected polyethylenimines (PEIs) including poly(2-ethyl-2-oxazoline) (PEtOx) as an N-acyl-substituted PEI, linear polyethylenimine (LPEI) and branched polyethylenimine (BPEI). Oat (a monocotyledon) (Avena sativa) and radish (a dicotyledon) (Raphanus sativus) were selected as the representative plants, which are recommended by the Organization for Economic Cooperation and Development (OECD) 208 as the standard to test for plant growth. Shoot and root length, fresh and dry matter, level of total nitrogen in green parts of the plants, as well as total chlorophyll and carotenoids were determined. Phytotoxicity of all the tested parameters was dependent on the concentration of the examined polymers in the soil as well as on the time of their incubation in the soil. According to our results, the amount of nitrogen in green parts of the plants was increased compared to the control plants, which revealed the uptake of the plant-available form of nitrogen released from the tested PEIs. This was especially true for the plants treated with LPEI. Ecotoxicological impact of the incubated polymers in the soil against marine bacteria Allivibrio fischeri proved that, the all tested polyethylenimines may be classified as not harmful to aquatic microorganisms.

Peptide Cross-Linked Poly(2-oxazoline) as a Sensor Material for the Detection of Proteases with a Quartz Crystal Microbalance

Inflammatory conditions are frequently accompanied by increased levels of active proteases, and there is rising interest in methods for their detection to monitor inflammation in a point of care setting. In this work, new sensor materials for disposable single-step protease biosensors based on poly(2-oxazoline) hydrogels cross-linked with a protease-specific cleavable peptide are described. The performance of the sensor material was assessed targeting the detection of matrix metalloproteinase-9 (MMP-9), a protease that has been shown to be an indicator of inflammation in multiple sclerosis and other inflammatory conditions. Films of the hydrogel were formed on gold-coated quartz crystals using thiol-ene click chemistry, and the cross-link density was optimized. The degradation rate of the hydrogel was monitored using a quartz crystal microbalance (QCM) and showed a strong dependence on the MMP-9 concentration. A concentration range of 0-160 nM of MMP-9 was investigated, and a lower limit of detection of 10 nM MMP-9 was determined.

Tailoring the self-assembly of a tripeptide for the formation of antimicrobial surfaces

The accumulation of bacteria on surfaces is currently one of the greatest concerns for the management of proper healthcare systems, water and energy. Here, we describe the mechanism by which a single peptide forms two pH-dependent supramolecular particles that resist bacterial contamination. By using NMR and molecular dynamics (MD), we determined the structures of the peptide monomers and showed the forces directing the self-assembly of each structure under different conditions. These peptide assemblies change the characteristics of bare glass and confer it with the ability to prevent biofilm formation. Furthermore, they can adsorb and release active compounds as demonstrated with an anticancer drug, antibiotic and enzyme. This synergism and the detailed understanding of the processes are necessary for developing new sterile surfaces for healthcare systems, water purification devices, food packaging or any environment that suffers from biocontamination.

P4VP Modified Zwitterionic Polymer for the Preparation of Antifouling Functionalized Surfaces

Zwitterionic polymers are suitable for replacing poly(ethylene glycol) (PEG) polymers because of their better antifouling properties, but zwitterionic polymers have poor mechanical properties, strong water absorption, and their homopolymers should not be used directly. To solve these problems, a reversible-addition fragmentation chain transfer (RAFT) polymerization process was used to prepare copolymers comprised of zwitterionic side chains that were attached to an ITO glass substrate using spin-casting. The presence of 4-vinylpyridine (4VP) and zwitterion chains on these polymer-coated ITO surfaces was confirmed using 1H NMR, FTIR, and GPC analyses, with successful surface functionalization confirmed using water contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) studies. Changes in water contact angles and C/O ratios (XPS) analysis demonstrated that the functionalization of these polymers with β-propiolactone resulted in hydrophilic mixed 4VP/zwitterionic polymers. Protein adsorption and cell attachment assays were used to optimize the ratio of the zwitterionic component to maximize the antifouling properties of the polymer brush surface. This work demonstrated that the antifouling surface coatings could be readily prepared using a "P4VP-modified" method, that is, the functionality of P4VP to modify the prepared zwitterionic polymer. We believe these materials are likely to be useful for the preparation of biomaterials for biosensing and diagnostic applications.

A Versatile Protein and Cell Patterning Method Suitable for Long-Term Neural Cultures

Herein, we present an easy-to-use protein and cell patterning method relying solely on pipetting, rinsing steps and illumination with a desktop lamp, which does not require any expensive laboratory equipment, custom-built hardware or delicate chemistry. This method is based on the adhesion promoter poly(allylamine)-grafted perfluorophenyl azide, which allows UV-induced cross-linking with proteins and the antifouling molecule poly(vinylpyrrolidone). Versatility is demonstrated by creating patterns with two different proteins and a polysaccharide directly on plastic well plates and on glass slides, and by subsequently seeding primary neurons and C2C12 myoblasts on the patterns to form islands and mini-networks. Patterning characterization is done via immunohistochemistry, Congo red staining, ellipsometry, and infrared spectroscopy. Using a pragmatic setup, patterning contrasts down to 5 μm and statistically significant long-term stability superior to the gold standard poly(l-lysine)-grafted poly(ethylene glycol) could be obtained. This simple method can be used in any laboratory or even in classrooms and its outstanding stability is especially interesting for long-term cell experiments, e.g., for bottom-up neuroscience, where well-defined microislands and microcircuits of primary neurons are studied over weeks.

Protein Adsorption and Coordination-Based End-Tethering of Functional Polymers on Metal-Phenolic Network Films

Metal-phenolic network (MPN) coatings have generated increasing interest owing to their biologically inspired nature, facile fabrication, and near-universal adherence, especially for biomedical applications. However, a key issue in biomedicine is protein fouling, and the adsorption of proteins on tannic acid-based MPNs remains to be comprehensively studied. Herein, we investigate the interaction of specific biomedically relevant proteins in solution (e.g., bovine serum albumin (BSA), immunoglobulin G (IgG), fibrinogen) and complex biological media (serum) using layer-by-layer-assembled tannic acid/Fe^III MPN films. When Fe^III was the outermost layer, galloyl-modified poly(2-ethyl-2-oxazoline) (P(EtOx)-Gal) could be grafted to the films through coordination bonds. Protein fouling and bacterial adhesion were greatly suppressed after functionalization with P(EtOx)-Gal and the mass of adsorbed protein was reduced by 79%. Interestingly, larger proteins adsorbed more on both the MPNs and P(EtOx)-functionalized MPNs. This study provides fundamental information on the interactions of MPNs with single proteins, mixtures of proteins as encountered in serum, and the noncovalent, coordination-based, functionalization of MPN films.

Biologically Functional Ultrathin Films Made of Zwitterionic Block Copolymer Micelles

We report the preparation of ultrathin coatings of zwitterionic block copolymer micelles and a comparison of their protein adsorption, adhesiveness, and antibacterial properties. Zwitterionic block copolymer micelles were obtained through pH-induced self-assembly of poly[3-dimethyl(methacryloyloxyethyl)ammonium propanesulfonate- b-2-(diisopropylamino)ethyl methacrylate] (βPDMA- b-PDPA) at pH 7.5. βPDMA- b-PDPA micelles with zwitterionic βPDMA-corona and pH-responsive PDPA-core were then used as building blocks to prepare layer-by-layer (LbL) assembled multilayer films together with hyaluronic acid (HA), tannic acid (TA), or poly(sodium 4-styrenesulfonate) (PSS). Protein adsorption tests showed that 3-layer βPDMA- b-PDPA micelles/HA films were the most effective to reduce the adhesion of BSA, lysozyme, ferritin, and casein. In contrast, βPDMA- b-PDPA micelles/TA films were the most attractive surfaces for protein adsorption. Bacterial antiadhesive tests against a model Gram-negative bacterium, Escherichia coli, and a model Gram-positive bacterium, Staphylococcus aureus, were in good agreement with the protein adsorption properties of the films. The differences in the antiadhesive properties between these three different film systems are discussed within the context of chemical nature and the functional chemical groups of the polyanions, layer number, and surface morphology of the films. Multilayers were found to lose their antiadhesiveness in the long term. However, by taking advantage of the pH-responsive hydrophobic micellar cores, we show that an antibacterial agent could be loaded into the micelles and multilayers could exhibit antibacterial activity in the long term especially at moderately acidic conditions. In contrast to antiadhesive properties, no significant differences were recorded in the antibacterial properties between the different film types.

Synthesis of defined high molar mass poly(2-methyl-2-oxazoline)

In this communication, we report for the first time the synthesis of defined high molar mass poly(2-methyl-2-oxazoline) (PMeOx), a water-soluble polymer with excellent anti-fouling properties.

Mixing Poly(ethylene glycol) and Poly(2-alkyl-2-oxazoline)s Enhances Hydration and Viscoelasticity of Polymer Brushes and Determines Their Nanotribological and Antifouling Properties

Poly(2-alkyl-2-oxazoline)s (PAOXAs) have progressively emerged as suitable alternatives for replacing poly(ethylene glycol) (PEG) in a variety of biomaterial-related applications, especially in the designing of polymer brush-based biointerfaces because of their stealth properties and chemical robustness. When equimolar mixtures of PEG and PAOXAs are assembled on surfaces to yield mixed polymer brushes, the interfacial physicochemical properties of the obtained films are significantly altered, in some cases, surpassing the biopassive and lubricious characteristics displayed by single-component PAOXA and PEG counterparts. With a combination of variable angle spectroscopic ellipsometry, quartz crystal microbalance with dissipation, and atomic force microscopy-based methods, we demonstrate that mixing of PEG brushes with equimolar amounts of PAOXA grafts determines an increment in film's hydration and viscoelasticity. In the case of mixtures of PEG and poly(2-methyl-2-oxazoline) or poly(2-ethyl-2-oxazoline), brushes displaying full inertness toward serum proteins and improved lubricity with respect to the corresponding single-component layers can be generated, while providing a multifunctional surface that substantially enlarges the applicability of the designed coatings.

Robust and Biocompatible Functionalization of ZnS Nanoparticles by Catechol-Bearing Poly(2-methyl-2-oxazoline)s

Zinc sulfide (ZnS) nanoparticles (NPs) are particularly interesting materials for their electronic and luminescent properties. Unfortunately, their robust and stable functionalization and stabilization, especially in aqueous media, has represented a challenging and not yet completely accomplished task. In this work, we report the synthesis of colloidally stable, photoluminescent and biocompatible core-polymer shell ZnS and ZnS:Tb NPs by employing a water-in-oil miniemulsion (ME) process combined with surface functionalization via catechol-bearing poly-2-methyl-2-oxazoline (PMOXA) of various molar masses. The strong binding of catechol anchors to the metal cations of the ZnS surface, coupled with the high stability of PMOXA against chemical degradation, enable the formation of suspensions presenting excellent colloidal stability. This feature, combined with the assessed photoluminescence and biocompatibility, make these hybrid NPs suitable for optical bioimaging.

Surface-Initiated Poly(oligo(2-alkyl-2-oxazoline)methacrylate) Brushes

Polymer brushes are particularly performant antifouling coatings, owing to their high grafting density that prevents unwanted biomacromolecules to diffuse through the coating and adhere to the underlying substrate. In addition to this structural feature, polymer brushes require a relatively high level of hydrophilicity and a globally neutral structure to display ultrahigh protein resistance. Poly(2-alkyl-2-oxaolines) are attractive building blocks for such coatings as they can display relatively high hydrophilicity, owing to their amide repeat units, but can also be side-chain and end-chain functionalized relatively readily. However, poly(2-alkyl-2-oxazolines) have not yet been introduced through a radical-mediated grafting from polymer brush structure that would confer the high level of grafting density that is the hallmark of highly protein resistant brushes. Here, we present the formation of a series of poly(oligo(2-alkyl-2-oxazoline)methacrylate) brushes generated via a grafting from approach, via atom transfer radical polymerization. We characterize the chemical structure of the resulting coatings via ellipsometry, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. We show that allyl end groups can be introduced as a side chain of these brushes to allow functionalization via thiol-ene chemistry. We demonstrate the excellent protein resistance of these coatings in single protein solutions as well as serum solutions at concentration typically used for cell culture. Finally, we demonstrate the feasibility of using these brushes for the micropatterning of cells and the generation of cell-based assays.

Investigation of drug release modulation from poly(2-oxazoline) micelles through ultrasound

Among external stimuli used to trigger release of a drug from a polymeric carrier, ultrasound has gained increasing attention due to its non-invasive nature, safety and low cost. Despite this attention, there is only limited knowledge about how materials available for the preparation of drug carriers respond to ultrasound. This study investigates the effect of ultrasound on the release of a hydrophobic drug, dexamethasone, from poly(2-oxazoline)-based micelles. Spontaneous and ultrasound-mediated release of dexamethasone from five types of micelles made of poly(2-oxazoline) block copolymers, composed of hydrophilic poly(2-methyl-2-oxazoline) and hydrophobic poly(2-n-propyl-2-oxazoline) or poly(2-butyl-2-oxazoline-co-2-(3-butenyl)-2-oxazoline), was studied. The release profiles were fitted by zero-order and Ritger-Peppas models. The ultrasound increased the amount of released dexamethasone by 6% to 105% depending on the type of copolymer, the amount of loaded dexamethasone, and the stimulation time point. This study investigates for the first time the interaction between different poly(2-oxazoline)-based micelle formulations and ultrasound waves, quantifying the efficacy of such stimulation in modulating dexamethasone release from these nanocarriers.

C1q-Mediated Complement Activation and C3 Opsonization Trigger Recognition of Stealth Poly(2-methyl-2-oxazoline)-Coated Silica Nanoparticles by Human Phagocytes

Poly(2-methyl-2-oxazoline) (PMOXA) is an alternative promising polymer to poly(ethylene glycol) (PEG) for design and engineering of macrophage-evading nanoparticles (NPs). Although PMOXA-engineered NPs have shown comparable pharmacokinetics and in vivo performance to PEGylated stealth NPs in the murine model, its interaction with elements of the human innate immune system has not been studied. From a translational angle, we studied the interaction of fully characterized PMOXA-coated vinyltriethoxysilane-derived organically modified silica NPs (PMOXA-coated NPs) of approximately 100 nm in diameter with human complement system, blood leukocytes, and macrophages and compared their performance with PEGylated and uncoated NP counterparts. Through detailed immunological and proteomic profiling, we show that PMOXA-coated NPs extensively trigger complement activation in human sera exclusively through the classical pathway. Complement activation is initiated by the sensing molecule C1q, where C1q binds with high affinity ( K_d = 11 ± 1 nM) to NP surfaces independent of immunoglobulin binding. C1q-mediated complement activation accelerates PMOXA opsonization with the third complement protein (C3) through the amplification loop of the alternative pathway. This promoted NP recognition by human blood leukocytes and monocyte-derived macrophages. The macrophage capture of PMOXA-coated NPs correlates with sera donor variability in complement activation and opsonization but not with other major corona proteins, including clusterin and a wide range of apolipoproteins. In contrast to these observations, PMOXA-coated NPs poorly activated the murine complement system and were marginally recognized by mouse macrophages. These studies provide important insights into compatibility of engineered NPs with elements of the human innate immune system for translational steps.

Emerging medical and engineering strategies for the prevention of long-term indwelling catheter blockage

Urinary catheters have been used on an intermittent or indwelling basis for centuries, in order to relieve urinary retention and incontinence. Nevertheless, the use of urinary catheters in the clinical setting is fraught with complication, the most common of which is the development of nosocomial urinary tract infections, known as catheter-associated urinary tract infections. Infections of this nature are not only significant owing to their high incidence rate and subsequent economic burden but also to the severe medical consecutions that result. A range of techniques have been employed in recent years, utilising various technologies in attempts to counteract the perilous medical cascade following catheter blockage. This review will focus on the current advancement (within the last 10 years) in prevention of encrustation and blockage of long-term indwelling catheters both from engineering and medical perspectives, with particular emphasis on the importance of stimuli-responsive systems.

Morphometric analysis of spread platelets identifies integrin αIIbβ3-specific contractile phenotype

Haemostatic platelet function is intimately linked to cellular mechanics and cytoskeletal morphology. How cytoskeletal reorganizations give rise to a highly contractile phenotype that is necessary for clot contraction remains poorly understood. To elucidate this process in vitro, we developed a morphometric screen to quantify the spatial organization of actin fibres and vinculin adhesion sites in single spread platelets. Platelets from healthy donors predominantly adopted a bipolar morphology on fibrinogen and fibronectin, whereas distinguishable, more isotropic phenotypes on collagen type I or laminin. Specific integrin α_IIbβ₃ inhibitors induced an isotropic cytoskeletal organization in a dose-dependent manner. The same trend was observed with decreasing matrix stiffness. Circular F-actin arrangements in platelets from a patient with type II Glanzmann thrombasthenia (GT) were consistent with the residual activity of a small number of α_IIbβ₃ integrins. Cytoskeletal morphologies in vitro thus inform about platelet adhesion receptor identity and functionality, and integrin α_IIbβ₃ mechanotransduction fundamentally determines the adoption of a bipolar phenotype associated with contraction. Super-resolution microscopy and electron microscopies further confirmed the stress fibre-like contractile actin architecture. For the first time, our assay allows the unbiased and quantitative assessment of platelet morphologies and could help to identify defective platelet behaviour contributing to elusive bleeding phenotypes.

Antimicrobial and Antifouling Strategies for Polymeric Medical Devices

Hospital-acquired infections arising from implanted polymeric medical devices continue to pose a significant challenge for medical professionals and patients. Often times, these infections arise from biofilm accumulation on the device, which is difficult to eradicate and usually requires antibiotic treatment and device removal. In response, significant efforts have been made to design functional polymeric devices or coatings that possess antimicrobial or antifouling properties that limit biofilm formation and subsequent infection by inhibiting or eliminating bacteria near the device surface or by limiting the initial attachment of proteins and bacteria. In this Viewpoint, we highlight the magnitude of device-associated infections, the role of biofilm formation in human pathogenesis, and recent advances in antimicrobial and antifouling polymers, as well as current strategies employed in commercial devices for preventing infection.

Cyclic Polymer Grafts That Lubricate and Protect Damaged Cartilage

Tissue-reactive graft copolymers were designed to protect the cartilage against enzymatic degradation and restore its lubrication properties during the early stages of osteoarthritis (OA). The copolymers feature a poly(glutamic acid) (PGA) backbone bearing hydroxybenzaldehyde (HBA) functions and cyclic poly(2-methyl-2-oxazoline) (PMOXA) side chains. PGA-PMOXA-HBA species chemisorb on the degraded tissue via Schiff bases and expose the biopassive and lubricious PMOXA cyclic grafts at the interface. The smaller hydrodynamic radius by cyclic PMOXA side chains coupled to the intrinsic absence of chain ends generate denser and more lubricious films on cartilage when compared to those produced by copolymers bearing linear PMOXA. Topology effects demonstrate how the introduction of cyclic polymers within tissue-reactive copolymers substantially improve their tribological and biopassive properties, suggesting a plethora of possible applications for cyclic macromolecules in biomaterials formulations.

Enzymatically crosslinked poly(2-alkyl-2-oxazoline) networks for 3D cell culture

Cellularized poly(2-alkyl-2-oxazoline) hydrogels fabricated by sortase-mediated crosslinking feature tunable mechanical properties and enable extremely high cell viability.

Maleimide end-functionalized poly(2-oxazoline)s by the functional initiator route: synthesis and (bio)conjugation

The synthesis of poly(2-ethyl-2-oxazoline)s with a maleimide group at the α chain end was carried out from new sulfonate ester initiators bearing a furan-protected maleimide group. The conditions of the polymerization were optimized for 50 °C using conventional heating (in contrast to microwave irradiation) to counteract the thermal lability of the cycloadduct introduced to protect the maleimide double bond. At this temperature, a tosylate variant was found to be unable to initiate the polymerization after several days. The controlled polymerization of 2-ethyl-2-oxazoline with a nosylate derivative was, however, successful as shown by kinetic experiments monitored by gas chromatography (GC) and size-exclusion chromatography (SEC). Poly(2-ethyl-oxazoline)s of various molar masses (4500 < M_n < 12 000 g mol⁻¹) with narrow dispersity (Đ < 1.2) were obtained. The stability of the protected maleimide functionality during the polymerization, its deprotection, and the reactivity of the deprotected end group by coupling with a model thiol molecule were proven by ¹H NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Finally, the conjugation of maleimide-functionalized poly(2-oxazoline) to a model protein (bovine serum albumin) was demonstrated by gel electrophoresis and MALDI-ToF mass spectrometry.

A new route for the synthesis of polyoxazolines with a maleimide end group is reported using a functional initiator.

Design and characterization of ultrastable, biopassive and lubricious cyclic poly(2-alkyl-2-oxazoline) brushes

Bilayer films featuring cyclic, poly(2-alkyl-2-oxazoline) brush interfaces display excellent biopassivity, lubrication and long-term stability in chemically harsh aqueous environments.

Smart functional polymer coatings for paper with anti-fouling properties

Preparation of functionalized cellulose films on SiO₂ to introduce protein repellent properties evaluated by spectroscopic in situ ellipsometry.

Protein Resistant Polymeric Biomaterials

Toward improving implantable medical devices as well as diagnostic performance, the development of polymeric biomaterials having resistance to proteins remains a priority. Herein, we highlight key strategies reported in the recent literature that have relied upon improvement of surface hydrophilicity via direct surface modification methods or with bulk modification using surface modifying additives (SMAs). These approaches have utilized a variety of techniques to incorporate the surface hydrophilization agent, including physisorption, hydrogel network formation, surface grafting, layer-by-layer (LbL) assembly and blending base polymers with SMAs. While poly(ethylene glycol) (PEG) remains the gold standard, new alternatives have emerged such as polyglycidols, poly(2-oxazoline)s (POx), polyzwitterions, and amphiphilic block copolymers. While these new strategies provide encouraging results, the need for improved correlation between in vitro and in vivo protein resistance is critical. This may be achieved by employing complex protein solutions as well as strides to enhance the sensitivity of protein adsorption measurements.

Easy to Apply Polyoxazoline-Based Coating for Precise and Long-Term Control of Neural Patterns

Arranging cultured cells in patterns via surface modification is a tool used by biologists to answer questions in a specific and controlled manner. In the past decade, bottom-up neuroscience emerged as a new application, which aims to get a better understanding of the brain via reverse engineering and analyzing elementary circuitry in vitro. Building well-defined neural networks is the ultimate goal. Antifouling coatings are often used to control neurite outgrowth. Because erroneous connectivity alters the entire topology and functionality of minicircuits, the requirements are demanding. Current state-of-the-art coating solutions such as widely used poly(l-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) fail to prevent primary neurons from making undesired connections in long-term cultures. In this study, a new copolymer with greatly enhanced antifouling properties is developed, characterized, and evaluated for its reliability, stability, and versatility. To this end, the following components are grafted to a poly(acrylamide) (PAcrAm) backbone: hexaneamine, to support spontaneous electrostatic adsorption in buffered aqueous solutions, and propyldimethylethoxysilane, to increase the durability via covalent bonding to hydroxylated culture surfaces and antifouling polymer poly(2-methyl-2-oxazoline) (PMOXA). In an assay for neural connectivity control, the new copolymer's ability to effectively prevent unwanted neurite outgrowth is compared to the gold standard, PLL-g-PEG. Additionally, its versatility is evaluated on polystyrene, glass, and poly(dimethylsiloxane) using primary hippocampal and cortical rat neurons as well as C2C12 myoblasts, and human fibroblasts. PAcrAm-g-(PMOXA, NH₂, Si) consistently outperforms PLL-g-PEG with all tested culture surfaces and cell types, and it is the first surface coating which reliably prevents arranged nodes of primary neurons from forming undesired connections over the long term. Whereas the presented work focuses on the proof of concept for the new antifouling coating to successfully and sustainably prevent unwanted connectivity, it is an important milestone for in vitro neuroscience, enabling follow-up studies to engineer neurologically relevant networks. Furthermore, because PAcrAm-g-(PMOXA, NH₂, Si) can be quickly applied and used with various surfaces and cell types, it is an attractive extension to the toolbox for in vitro biology and biomedical engineering.

Quantitative fabrication, performance optimization and comparison of PEG and zwitterionic polymer antifouling coatings

A versatile fabrication and performance optimization strategy of PEG and zwitterionic polymer coatings is developed on the sensor chip of surface plasma resonance (SPR) instrument. A random copolymer bearing phosphorylcholine zwitterion and active ester side chains (PMEN) and carboxylic PEG coatings with comparable thicknesses were deposited on SPR sensor chips via amidation coupling on the precoated polydopamine (PDA) intermediate layer. The PMEN coating showed much stronger resistance to bovine serum albumin (BSA) adsorption than PEG coating at very thin thickness (∼1nm). However, the BSA resistant efficacy of PEG coating could exceed that of PMEN due to stronger steric repelling effect when the thickness increased to 1.5∼3.3nm. Interestingly, both the PEG and PMEN thick coatings (≈3.6nm) showed ultralow fouling by BSA and bovine plasma fibrinogen (Fg). Moreover, changes in the PEG end group from -OH to -COOH, protein adsorption amount could increase by 10-fold. Importantly, the optimized PMEN and PEG-OH coatings were easily duplicated on other substrates due to universal adhesion of the PDA layer, showed excellent resistance to platelet, bacteria and proteins, and no significant difference in the antifouling performances was observed. These detailed results can explain the reported discrepancy in performances between PEG and zwitterionic polymer coatings by thickness. This facile and substrate-independent coating strategy may benefit the design and manufacture of advanced antifouling biomedical devices and long circulating nanocarriers.

STATEMENT OF SIGNIFICANCE

Prevention of biofouling is one of the biggest challenges for all biomedical applications. However, it is very difficult to fabricate a highly hydrophilic antifouling coating on inert materials or large devices. In this study, PEG and zwitterion polymers, the most widely investigated polymers with best antifouling performance, are conveniently immobilized on different kinds of substrates from their aqueous solutions by precoating a polydopamine intermediate layer as the universal adhesive and readily re-modifiable surface. Importantly, the coating fabrication and antifouling performance can be monitored and optimized quantitatively by a surface plasma resonance (SPR) system. More significantly, the SPR on-line optimized coatings were successfully duplicated off-line on other substrates, and supported by their excellent antifouling properties.

Healable Antifouling Films Composed of Partially Hydrolyzed Poly(2-ethyl-2-oxazoline) and Poly(acrylic acid)

Antifouling polymeric films can prevent undesirable adhesion of bacteria but are prone to accidental scratches, leading to a loss of their antifouling functions. To solve this problem, we report the fabrication of healable antifouling polymeric films by layer-by-layer assembly of partially hydrolyzed poly(2-ethyl-2-oxazoline) (PEtOx-EI-7%) and poly(acrylic acid) (PAA) based on hydrogen-bonding interaction as the driving force. The thermally cross-linked (PAA/PEtOx-EI-7%)*100 films show strong resistance to adhesion of both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis bacteria due to the high surface and bulk concentration of the antifouling polymer PEtOx-EI-7%. Meanwhile, the dynamic nature of the hydrogen-bonding interactions and the high mobility of the polymers in the presence of water enable repeated healing of cuts of several tens of micrometers wide in cross-linked (PAA/PEtOx-EI-7%)*100 films to fully restore their antifouling function.