Growth cones turn and migrate up an immobilized gradient of the laminin IKVAV peptide

Regulation of axonal outgrowth and pathfinding by integrin-ECM interactions

Developing neurons use a combination of guidance cues to assemble a functional neural network. A variety of proteins immobilized within the extracellular matrix (ECM) provide specific binding sites for integrin receptors on neurons. Integrin receptors on growth cones associate with a number of cytosolic adaptor and signaling proteins that regulate cytoskeletal dynamics and cell adhesion. Recent evidence suggests that soluble growth factors and classic axon guidance cues may direct axon pathfinding by controlling integrin-based adhesion. Moreover, because classic axon guidance cues themselves are immobilized within the ECM and integrins modulate cellular responses to many axon guidance cues, interactions between activated receptors modulate cell signals and adhesion. Ultimately, growth cones control axon outgrowth and pathfinding behaviors by integrating distinct biochemical signals to promote the proper assembly of the nervous system. In this review, we discuss our current understanding how ECM proteins and their associated integrin receptors control neural network formation.

Biomaterials for the development of peripheral nerve guidance conduits

Currently, surgical treatments for peripheral nerve injury are less than satisfactory. The gold standard of treatment for peripheral nerve gaps >5 mm is the autologous nerve graft; however, this treatment is associated with a variety of clinical complications, such as donor site morbidity, limited availability, nerve site mismatch, and the formation of neuromas. Despite many recent advances in the field, clinical studies implementing the use of artificial nerve guides have yielded results that are yet to surpass those of autografts. Thus, the development of a nerve guidance conduit, which could match the effectiveness of the autologous nerve graft, would be beneficial to the field of peripheral nerve surgery. Design strategies to improve surgical outcomes have included the development of biopolymers and synthetic polymers as primary scaffolds with tailored mechanical and physical properties, luminal "fillers" such as laminin and fibronectin as secondary internal scaffolds, surface micropatterning, stem cell inclusion, and controlled release of neurotrophic factors. The current article highlights approaches to peripheral nerve repair through a channel or conduit, implementing chemical and physical growth and guidance cues to direct that repair process.

Quantitative photochemical immobilization of biomolecules on planar and corrugated substrates: a versatile strategy for creating functional biointerfaces

Methods for the generation of substratespresenting biomolecules in a spatially controlled manner are enabling tools for applications in biosensor systems, microarray technologies, fundamental biological studies and biointerface science. We have implemented a method to create biomolecular patterns by using light to control the direct covalent immobilization of biomolecules onto benzophenone-modified glass substrates. We have generated substrates presenting up to three different biomolecules patterned in sequence, and demonstrate biomolecular photopatterning on corrugated substrates. The chemistry of the underlying monolayer was optimized to incorporate poly(ethylene glycol) to enable adhesive cell adhesion onto patterned extracellular matrix proteins. Substrates were characterized with contact angle goniometry, AFM, and immunofluorescence microscopy. Importantly, radioimmunoassays were performed to quantify the site density of immobilized biomolecules on photopatterned substrates. Retained function of photopatterned proteins was demonstrated both by native ligand recognition and cell adhesion to photopatterned substrates, revealing that substrates generated with this method are suitable for probing specific cell receptor-ligand interactions. This molecularly general photochemical patterning method is an enabling tool for the creation of substrates presenting both biochemical and topographical variation, which is an important feature of many native biointerfaces.

Microfluidic generation of haptotactic gradients through 3D collagen gels for enhanced neurite growth

We adapted a microfluidic system used previously to generate durotactic gradients of stiffness in a 3D collagen gel, to produce haptotactic gradients of adhesive ligands through the collagen gel. Oligopeptide sequences that included bioactive peptide sequences from laminin, YIGSR, or IKVAV, were grafted separately onto type I collagen using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC). Solutions of peptide-grafted collagen and untreated collagen were then used as source and sink input solutions, respectively, in an H-shaped microfluidic network fabricated using traditional soft lithography. One-dimensional gradients of the peptide-grafted collagen solution were generated in the channel that connected the source and sink channels, and these gradients became immobilized upon self-assembly of the collagen into a 3D fibrillar gel. The slope and average concentration of the gradients were adjusted by changing the concentration of the source solutions and by changing the length of the cross-channel. A separate, underlying channel in the microfluidic construct allowed the introduction of a chick embryo dorsal root ganglion into the network. Neurites from these explants grew significantly longer up steep gradients of YIGSR, but shallow gradients of IKVAV in comparison to untreated collagen controls. When these two gradients were presented in combination, the bias in growth acceleration was the largest and most consistent. No differences were observed in the number of neurites choosing to grow up or down the gradients in any condition. These results suggest that the incorporation of distinct gradients of multiple bioactive ligands can improve directional acceleration of regenerating axons.

Pioneering studies on the mechanisms of neuronal morphogenesis

Axon outgrowth and pathfinding occurs through a complex series of interacting biochemical signaling pathways that regulate the motility of neuronal growth cones. Over the past 30 years, Paul Letourneau and his students have explored the molecular basis of growth cone motility and have contributed immensely to this field. In celebration of his 65th birthday, this essay is written in gratitude for Paul's many contributions and training.

Microscale plasma-initiated patterning of electrospun polymer scaffolds

Microscale plasma-initiated patterning (μPIP) is a novel micropatterning technique used to create biomolecular micropatterns on polymer surfaces. The patterning method uses a polydimethylsiloxane (PDMS) stamp to selectively protect regions of an underlying substrate from oxygen plasma treatment resulting in hydrophobic and hydrophilic regions. Preferential adsorption of the biomolecules onto either the plasma-exposed (hydrophilic) or plasma-protected (hydrophobic) regions leads to the biomolecular micropatterns. In the current work, laminin-1 was applied to an electrospun polyamide nanofibrillar matrix following plasma treatment. Radial glial clones (neural precursors) selectively adhered to these patterned matrices following the contours of proteins on the surface. This work demonstrates that textured surfaces, such as nanofibrillar scaffolds, can be micropatterned to provide external chemical cues for cellular organization.

In vivo imaging of cell behaviors and F-actin reveals LIM-HD transcription factor regulation of peripheral versus central sensory axon development

Background

Development of specific neuronal morphology requires precise control over cell motility processes, including axon formation, outgrowth and branching. Dynamic remodeling of the filamentous actin (F-actin) cytoskeleton is critical for these processes; however, little is known about the mechanisms controlling motile axon behaviors and F-actin dynamics in vivo. Neuronal structure is specified in part by intrinsic transcription factor activity, yet the molecular and cellular steps between transcription and axon behavior are not well understood. Zebrafish Rohon-Beard (RB) sensory neurons have a unique morphology, with central axons that extend in the spinal cord and a peripheral axon that innervates the skin. LIM homeodomain (LIM-HD) transcription factor activity is required for formation of peripheral RB axons. To understand how neuronal morphogenesis is controlled in vivo and how LIM-HD transcription factor activity differentially regulates peripheral versus central axons, we used live imaging of axon behavior and F-actin distribution in vivo.

Results

We used an F-actin biosensor containing the actin-binding domain of utrophin to characterize actin rearrangements during specific developmental processes in vivo, including axon initiation, consolidation and branching. We found that peripheral axons initiate from a specific cellular compartment and that F-actin accumulation and protrusive activity precede peripheral axon initiation. Moreover, disruption of LIM-HD transcriptional activity has different effects on the motility of peripheral versus central axons; it inhibits peripheral axon initiation, growth and branching, while increasing the growth rate of central axons. Our imaging revealed that LIM-HD transcription factor activity is not required for F-actin based protrusive activity or F-actin accumulation during peripheral axon initiation, but can affect positioning of F-actin accumulation and axon formation.

Conclusion

Our ability to image the dynamics of F-actin distribution during neuronal morphogenesis in vivo is unprecedented, and our experiments provide insight into the regulation of cell motility as neurons develop in the intact embryo. We identify specific motile cell behaviors affected by LIM-HD transcription factor activity and reveal how transcription factors differentially control the formation and growth of two axons from the same neuron.

Student award winner in the undergraduate's degree category for the Society for Biomaterials 35th Annual Meeting, Orlando, Florida, April 13-16, 2011. Neurite growth in PEG gels: effect of mechanical stiffness and laminin concentration

Within a 3D environment, the chemical and mechanical properties of a scaffold can significantly influence nerve behavior. How these properties influence with nerve cells is important for optimizing neurite extension within a scaffold. The purpose of this study was to investigate the effect of low concentration poly(ethylene glycol) (PEG) with added laminin on 3D growth of dissociated dorsal root ganglia. Because of its high affinity for neurite adhesion and ability to promote extension, laminin was conjugated to the PEG chain, as well as mixed in the gel, at various concentrations to provide chemical cues. Gel stiffness, as determined by G*, significantly decreased with decreasing PEG concentration and with increasing laminin conjugate. Extension within the gels increased as the concentration of laminin increased with no difference between how laminin was presented (mixed or conjugated) to the cells. For example, in 3% PEG, extension increased from 92.29 ± 5.27 μm to 146.35 ± 13.12 μm as laminin conjugate concentration increased from plain to 100 μg/ml. Results indicated that the chemical properties of the scaffold influenced neurite growth more than the mechanical properties as laminin concentration had a greater impact on growth than the stiffness of the gel over the range studied. Neurite length as a function of scaffold stiffness and adhesion properties was also characterized and demonstrated a positive linear relationship between rate of neurite extension and laminin concentration. This study further demonstrates the importance of characterizing interactions between cell behavior and the chemical and mechanical environment.

Controlling neurite outgrowth with patterned substrates

In vivo, neurons form neurites, one of which develops into the axon while others become dendrites. While this neuritogenesis process is well programmed in vivo, there are limited methods to control the number and location of neurite extension in vitro. Here we report a method to control neuritogenesis by confining neurons in specific regions using cell resistant poly(oligoethyleneglycol methacrylate-co-methacrylic acid (OEGMA-co-MA)) or poly(ethyleneglycol-block-lactic acid) PEG-PLA. Line patterned substrates reduce multiple extension of neurites and stimulate bi-directional neurite budding for PC12 and cortical neurons. PC12 cells on 20 and 30 μm line patterns extended one neurite in each direction along the line pattern while cortical neuron on 20 and 30 μm line patterns extended one or two neurites in each direction along the line pattern. Statistical analysis of neurite lengths revealed that PC12 cells and cortical neurons on line patterns extend longer neurites. The ability to guide formation of neurites on patterned substrates is useful for generating neural networks and promoting neurite elongation.

Combinatorial and high-throughput screening of biomaterials

Combinatorial and high-throughput methods have been increasingly used to accelerate research and development of new biomaterials. These methods involve creating miniaturized libraries that contain many specimens in one sample in the form of gradients or arrays, followed by automated data collection and analysis. This article reviews recent advances in utilizing combinatorial and high-throughput methods to better understand cell-material interactions, particularly highlighting our efforts at the NIST Polymers Division. Specifically, fabrication techniques to generate controlled surfaces (2D) and 3D cell environments (tissue engineering scaffolds) as well as methods to characterize and analyze material properties and cell-material interactions are described. In conclusion, additional opportunities for combinatorial methods for biomaterials research are noted, including streamlined sample fabrication and characterization, appropriate and automated bioassays, and data analysis.

Live cell imaging of neuronal growth cone motility and guidance in vitro

The neuronal growth cone, a highly motile structure at the tip of neuronal processes, is an excellent model system for studying directional cell movements. While biochemical and genetic approaches unveiled molecular interactions between ligand, receptor, signaling, and cytoskeleton-associated proteins controlling axonal growth and guidance, in vitro live cell imaging has emerged as a crucial approach for dissecting cellular mechanisms of growth cone motility and guidance. Important insights into these mechanisms have been gained from studies using the large growth cones elaborated by Aplysia californica neurons, an outstanding model system for live cell imaging for a number of reasons. Identified neurons can be isolated and imaged at room temperature. Aplysia growth cones are five to ten times larger than growth cones from other species, making them suitable for quantitative high-resolution imaging of cytoskeletal protein dynamics and biophysical approaches. Lastly, protein, RNA, fluorescent probes, and small molecules can be microinjected into the neuronal cell body for localization and functional studies. This chapter describes culturing of Aplysia bag cell neurons, live cell imaging of neuronal growth cones using differential interference contrast and fluorescent speckle microscopy as well as the restrained bead interaction assay to induce adhesion-mediated growth cone guidance in vitro.

Fasciculation and defasciculation of neurite bundles on micropatterned substrates

We describe experiments of fasciculation, i.e., bundling, of chick sensory neurites on 2D striped substrates. By Fourier decomposition, we separate left-going and right-going neurite components from in vitro images, and we find first that neurite bundles orient toward preferred angles with respect to the stripe direction, and second that in vitro bundles travel in leftward and rightward directions nearly uninterrupted by crossings of bundles traveling in the opposing direction. We explore mechanisms that lead to these behaviors, and summarize implications for future models for neurite outgrowth and guidance.

A stochastic model of neuronal growth cone guidance regulated by multiple sensors

Neuronal growth cones migrate directionally under the control of axon guidance molecules, thereby forming synapses in the developing brain. The signal transduction system by which a growth cone detects surrounding guidance molecules, analyzes the detected signals, and then determines the overall behavior remains undetermined. In this study, we describe a novel stochastic model of this behavior that utilizes multiple sensors on filopodia to respond to guidance molecules. Overall growth cone behavior is determined by using only the concentration gradients of guidance molecules in the immediate vicinity of each sensor. The detected signal at each sensor, which is treated as a vector quantity, is sent to the growth cone center and then integrated to determine axonal growth in the next step by means of a simple vector operation. We compared the results of computer simulations of axonal growth with observations of actual axonal growth from co-culture experiments using olfactory bulb and septum. The probabilistic distributions of axonal growth generated by the computer simulation were consistent with those obtained from the culture experiments, indicating that our model accurately simulates growth cone behavior. We believe that this model will be useful for elucidating the as yet unknown mechanisms responsible for axonal growth in vivo.

Covalently immobilized RGD gradient on PEG hydrogel scaffold influences cell migration parameters

Understanding the influence of a controlled spatial distribution of biological cues on cell activities can be useful to design "cell instructive" materials, able to control and guide the formation of engineered tissues in vivo and in vitro. To this purpose, biochemical and mechanical properties of the resulting biomaterial must be carefully designed and controlled. In this work, the effect of covalently immobilized RGD peptide gradients on poly(ethylene glycol) diacrylate hydrogels on cell behaviour was studied. We set up a mechanical device generating gradients based on a fluidic chamber. Cell response to RGD gradients with different slope (0.7, 1 and 2 mM cm(-1)) was qualitatively and quantitatively assessed by evaluating cell adhesion and, in particular, cell migration, compared to cells seeded on hydrogels with uniform distribution of RGD peptides. To evaluate the influence of RGD gradient and to exclude any concentration effect on cell response, all analyses were carried out in a specific region of the gradients which displayed the same average concentration of RGD (1.5 mM). Results suggest that cells recognize the RGD gradient and adhere onto it assuming a stretched shape. Moreover, cells tend to migrate in the direction of the gradient, as their speed is higher than that of cells migrating on hydrogels with a uniform distribution of RGD and increases by increasing RGD gradient steepness. This increment is due to an augmentation of bias speed component of the mean squared speed, that is, the drift of the cell population migrating on the anisotropic surface provided by the RGD gradient.

The use of immobilized neurotrophins to support neuron survival and guide nerve fiber growth in compartmentalized chambers

We answered two major questions: (1) does retrograde signaling involve retrograde transport of nerve growth factor (NGF); and (2) is a gradient of immobilized NGF sufficient to promote and guide local axonal growth? To answer these questions, we developed a technique that resulted in stably immobilized NGF and combined this with compartmented chambers. NGF was photochemically-immobilized on a chitosan surface either in the cell body (CB) compartment, distal axon (DA) compartment, or both. Neuron survival and axon outgrowth were found to be insignificantly different from positive controls where soluble NGF was present. When NGF was immobilized on chitosan surfaces in the DA compartment, and in the absence of soluble NGF, neuron survival was observed, likely due to the retrograde signal of the activated TrkA receptor and NGF-induced signals, but not the retrograde signal of NGF itself. Axons were guided towards the higher end of the step concentration gradient of NGF that was photoimmobilized on the chitosan surface in the DA compartment by laser confocal patterning, demonstrating axonal guidance. These studies provide better insight into NGF signaling mechanisms which are important to both understanding developmental disorders and degenerative diseases of the nervous system, as well as improving design strategies to promote nerve regeneration after injury.

The effect of laminin peptide gradient in enzymatically cross-linked collagen scaffolds on neurite growth

Guided neurite growth is critical in both peripheral nervous system and central nervous system nerve regeneration. Scaffolds that provide structural and guidance cues for neuronal cells have a potential role in neural regeneration application. Type I collagen is suitable to be processed as an engineered scaffold for nerve regeneration because of its biological and structural properties. A few previous studies have shown that cross-linking of collagen scaffolds with microbial transglutaminase improves the mechanical strength and degradation properties of the scaffolds. It was shown that laminin 5 can regulate neurite outgrowth and extension. A motif (PPFLMLLKGSTR) in the human laminin 5 alpha 3 chain is crucial for both integrin alpha 3 beta 1 receptor binding and cell adhesion. In the present work, we studied the guidance effect of a laminin peptide (PPFLMLLKGSTR) gradient in collagen and cross-linked collagen scaffolds on neurite growth. Neurites of rat pheochromocytoma (PC12) cells showed a preferential growth toward the high laminin concentration level on the collagen scaffold, while the incorporation of laminin peptide in the scaffold did not influence neurite length of PC12 cells.

Rapid multicomponent optical protein patterning

Cells sense spatial distributions of molecules which trigger signal transduction pathways that induce the cell to migrate or extend by remodelling the cytoskeleton. However, the influence of local and small variations of extracellular protein concentration on chemotaxis is not fully understood, due in part to the lack of simple and precise methods to pattern proteins in vitro. We recently developed a new technology to fabricate such patterns which relies on photobleaching fluorophores to adsorb proteins on a cell culture substrate: laser-assisted protein adsorption by photobleaching (LAPAP). Here we report several key improvements to LAPAP: we created arbitrary patterns made of several different proteins simultaneously, we reduced the fabrication time more than one order of magnitude and we used secondary antibodies to significantly enlarge the spectrum of proteins that can be employed. As a result, multicomponent protein gradients can be produced using reagents that are typically available in life science research laboratories on a standard inverted microscope equipped with a camera port.

Current tissue engineering and novel therapeutic approaches to axonal regeneration following spinal cord injury using polymer scaffolds

This review highlights current tissue engineering and novel therapeutic approaches to axonal regeneration following spinal cord injury. The concept of developing 3-dimensional polymer scaffolds for placement into a spinal cord transection model has recently been more extensively explored as a solution for restoring neurologic function after injury. Given the patient morbidity associated with respiratory compromise, the discrete tracts in the spinal cord conveying innervation for breathing represent an important and achievable therapeutic target. The aim is to derive new neuronal tissue from the surrounding, healthy cord that will be guided by the polymer implant through the injured area to make functional reconnections. A variety of naturally derived and synthetic biomaterial polymers have been developed for placement in the injured spinal cord. Axonal growth is supported by inherent properties of the selected polymer, the architecture of the scaffold, permissive microstructures such as pores, grooves or polymer fibres, and surface modifications to provide improved adherence and growth directionality. Structural support of axonal regeneration is combined with integrated polymeric and cellular delivery systems for therapeutic drugs and for neurotrophic molecules to regionalize growth of specific nerve populations.

Direct biophotolithographic method for generating substrates with multiple overlapping biomolecular patterns and gradients

We describe an approach to generate multicomponent surface-immobilized patterns and gradients on the basis of the photochemically controlled covalent coupling of solution-phase biomolecules to benzophenone-modified substrates. Gradients were simply achieved by continuously varying the exposure to nondamaging UV light across the surface with the gradient profile controlled by biomolecule concentration and the spatial and temporal illumination of the surface. Sequential exposure of the same surface in the presence of different biomolecules resulted in overlapping patterns and gradients of proteins and carbohydrates. Finally, we preliminarily demonstrate that the resulting surfaces are suitable for generating model substrates to probe cell-substrate interactions.

Co-assembling peptides as defined matrices for endothelial cells

Self-assembling peptides and peptide derivatives bearing cell-binding ligands are increasingly being investigated as defined cell culture matrices and as scaffolds for regenerative medicine. In order to systematically refine such scaffolds to elicit specific desired cell behaviors, ligand display should ideally be achieved without inadvertently altering other physicochemical properties such as viscoelasticity. Moreover, for in vivo applications, self-assembled biomaterials must exhibit low immunogenicity. In the present study, multi-peptide co-assembling hydrogels based on the beta-sheet fibrillizing peptide Q11 (QQKFQFQFEQQ) were designed such that they presented RGDS or IKVAV ligands on their fibril surfaces. In co-assemblies of the ligand-bearing peptides with Q11, ligand incorporation levels capable of influencing the attachment, spreading, morphology, and growth of human umbilical vein endothelial cells (HUVECs) did not significantly alter the materials' fibrillization, beta-turn secondary structure, or stiffness. RGDS-Q11 specifically increased HUVEC attachment, spreading, and growth when co-assembled into Q11 gels, whereas IKVAV-Q11 exerted a more subtle influence on attachment and morphology. Additionally, Q11 and RGDS-Q11 were minimally immunogenic in mice, making Q11-based biomaterials attractive candidates for further investigation as defined, modular extracellular matrices for applications in vitro and in vivo.

Enhanced neurite alignment on micro-patterned poly-L-lactic acid films

The ability of the damaged central nervous system and peripheral nervous system to properly recover hinges on the regenerative mechanisms and functional reconnection to appropriate targets. Successful pathfinding of axons is controlled by a complex interplay of diffusible or substrate-bound biochemical and electrical cues. Physical guidance has also been shown to occur in vivo and in vitro, either via cell-cell or cell-extracellular matrix mediated contact. In the current study, we probe the role of contact guidance in facilitating neural regeneration and pathfinding. Using soft lithographic techniques, we have created thin films of poly-L-lactic acid polymer (PLLA) possessing periodic features approaching the nanometer regime. Rat PC-12 cells and chick sympathetic neurons were subsequently cultured onto these substrates and parameters, such as neurite emergence and orientation angle, neurite length, and neuronal architecture are characterized. Our results reveal that both PC-12 and chick sympathetic neurites can be effectively guided by unidirectional grooves as small as 100 nm in height and 1 microm in width. Moreover, sympathetic cells produced neurites that were longer on patterned substrata than on controls. The development of novel degradable micro/nanopatterned substrates for cell study will permit more in-depth analysis of contact mediated guidance mechanisms in addition to having applications in neural and tissue engineering.

Adenosine induces growth-cone turning of sensory neurons

The formation of appropriate connections between neurons and their specific targets is an essential step during development and repair of the nervous system. Growth cones are located at the leading edges of the growing neurites and respond to environmental cues in order to be guided to their final targets. Directional information can be coded by concentration gradients of substrate-bound or diffusible-guidance molecules. Here we show that concentration gradients of adenosine stimulate growth cones of sensory neurons (dorsal root ganglia) from chicken embryos to turn towards the adenosine source. This response is mediated by adenosine receptors. The subsequent signal transduction process involves cAMP. It may be speculated that the in vivo function of this response is concerned with the formation or the repair and regeneration of the peripheral nervous system.

Patterning protein concentration using laser-assisted adsorption by photobleaching, LAPAP

The study of cellular responses to changes in the spatial distribution of molecules in development, immunology and cancer, requires reliable methods to reproduce in vitro the precise distributions of proteins found in vivo. Here we present a straightforward method for generating substrate-bound protein patterns which has the simplicity required to be implemented in typical life science laboratories. The method exploits photobleaching of fluorescently tagged molecules to generate patterns and concentration gradients of protein with sub-micron spatial resolution. We provide an extensive characterization of the technique and demonstrate, as proof of principle, axon guidance by gradients of substrate-bound laminin peptide generated in vitro using LAPAP.

Strategies and applications for incorporating physical and chemical signal gradients in tissue engineering

From embryonic development to wound repair, concentration gradients of bioactive signaling molecules guide tissue formation and regeneration. Moreover, gradients in cellular and extracellular architecture as well as in mechanical properties are readily apparent in native tissues. Perhaps tissue engineers can take a cue from nature in attempting to regenerate tissues by incorporating gradients into engineering design strategies. Indeed, gradient-based approaches are an emerging trend in tissue engineering, standing in contrast to traditional approaches of homogeneous delivery of cells and/or growth factors using isotropic scaffolds. Gradients in tissue engineering lie at the intersection of three major paradigms in the field-biomimetic, interfacial, and functional tissue engineering-by combining physical (via biomaterial design) and chemical (with growth/differentiation factors and cell adhesion molecules) signal delivery to achieve a continuous transition in both structure and function. This review consolidates several key methodologies to generate gradients, some of which have never been employed in a tissue engineering application, and discusses strategies for incorporating these methods into tissue engineering and implant design. A key finding of this review was that two-dimensional physicochemical gradient substrates, which serve as excellent high-throughput screening tools for optimizing desired biomaterial properties, can be enhanced in the future by transitioning from two dimensions to three dimensions, which would enable studies of cell-protein-biomaterial interactions in a more native tissue-like environment. In addition, biomimetic tissue regeneration via combined delivery of graded physical and chemical signals appears to be a promising strategy for the regeneration of heterogeneous tissues and tissue interfaces. In the future, in vivo applications will shed more light on the performance of gradient-based mechanical integrity and signal delivery strategies compared to traditional tissue engineering approaches.

Autonomous turning of cerebellar granule cells in vitro by intrinsic programs

External guidance cues play a role in controlling neuronal cell turning in the developing brain, but little is known about whether intrinsic programs are also involved in controlling the turning. In this study, we examined whether granule cells undergo autonomous changes in the direction of migration in the microexplant cultures of the early postnatal mouse cerebellum. We found that granule cells exhibit spontaneous and periodical turning without cell-cell contact and in the absence of external guidance cues. The frequency of turning was increased by stimulating the Ca(2+) influx and the internal Ca(2+) release, or inhibiting the cAMP signaling pathway, while the frequency was reduced by inhibiting the Ca(2+) influx. Granule cell turning in vitro was classified into four distinct modes, which were characterized by the morphological changes in the leading process and the trailing process, such as bifurcating, turning, withdrawing, and changing the polarity. The occurrence of the 1st and 2nd modes of turning was differentially affected by altering the Ca(2+) and cAMP signaling pathways. Collectively, the results demonstrate that intrinsic programs regulate the autonomous turning of cerebellar granule cells in vitro. Furthermore, the results suggest that extrinsic signals play a role as essential modulators of intrinsic programs.

The cell adhesion molecule Tag1, transmembrane protein Stbm/Vangl2, and Lamininalpha1 exhibit genetic interactions during migration of facial branchiomotor neurons in zebrafish

Interactions between a neuron and its environment play a major role in neuronal migration. We show here that the cell adhesion molecule Transient Axonal Glycoprotein (Tag1) is necessary for the migration of the facial branchiomotor neurons (FBMNs) in the zebrafish hindbrain. In tag1 morphant embryos, FBMN migration is specifically blocked, with no effect on organization or patterning of other hindbrain neurons. Furthermore, using suboptimal morpholino doses and genetic mutants, we found that tag1, lamininalpha1 (lama1) and stbm, which encodes a transmembrane protein Vangl2, exhibit pairwise genetic interactions for FBMN migration. Using time-lapse analyses, we found that FBMNs are affected similarly in all three single morphant embryos, with an inability to extend protrusions in a specific direction, and resulting in the failure of caudal migration. These data suggest that tag1, lama1 and vangl2 participate in a common mechanism that integrates signaling between the FBMN and its environment to regulate migration.

Miniaturized system of neurotrophin patterning for guided regeneration

Understanding the fundamentals of cell behaviour is imperative for designing and improving engineering strategies for regenerative medicine. By combining the precision of confocal microscopy with photochemistry, nerve growth factor (NGF) was chemically immobilized on chitosan films either in distinct areas or as concentration gradients. Using rhodamine as a proxy for NGF, a series of immobilized concentration gradients were created, using the number of rastering scans within a defined area and the distance between each area as a way to control the resulting gradient. The same photochemistry was applied to create NGF patterns on chitosan films which were visualized by immunostaining, and the immobilized NGF remained bioactive as demonstrated with a neuron survival assay. Neuron survival was 73.2+/-1.3% after 3 days of culture on chitosan films with 30 ng/cm(2) of homogenously immobilized NGF, which was comparable to 74.8+/-3.4% neuron survival on chitosan with 50 ng/ml of soluble NGF present. Interestingly, when neurons were plated on a chitosan film that had distinct immobilized NGF-patterned areas surrounded by unmodified chitosan, the neurons remained predominantly as single cells in the NGF-patterned regions, but formed aggregates outside of these patterns on the plain chitosan film. Thus, the immobilized NGF pattern influenced neuron behaviour and can be used to further probe mechanisms of other neuron behaviour such as axon guidance. Importantly, the versatility of the confocal laser patterning technique reported here can be extended to other factors to elucidate fundamental cell functions, and hence design strategies in regenerative medicine.

Fabrication of protein gradients for cell culture using a miniature squeegee

We present a straightforward method to create spatial gradients of substrate bound protein for live cell studies using only mechanical parts. Protein concentration gradients on a micron scale can be fabricated in several minutes for a relatively low cost using a method that is generally applicable to any protein and substrate combination. We describe the details of the device construction, and provide examples of mammalian cells grown on substrates patterned with protein concentration gradients using this technique.

Transient axonal glycoprotein-1 (TAG-1) and laminin-alpha1 regulate dynamic growth cone behaviors and initial axon direction in vivo

BACKGROUND

How axon guidance signals regulate growth cone behavior and guidance decisions in the complex in vivo environment of the central nervous system is not well understood. We have taken advantage of the unique features of the zebrafish embryo to visualize dynamic growth cone behaviors and analyze guidance mechanisms of axons emerging from a central brain nucleus in vivo.

RESULTS

We investigated axons of the nucleus of the medial longitudinal fascicle (nucMLF), which are the first axons to extend in the zebrafish midbrain. Using in vivo time-lapse imaging, we show that both positive axon-axon interactions and guidance by surrounding tissue control initial nucMLF axon guidance. We further show that two guidance molecules, transient axonal glycoprotein-1 (TAG-1) and laminin-alpha1, are essential for the initial directional extension of nucMLF axons and their subsequent convergence into a tight fascicle. Fixed tissue analysis shows that TAG-1 knockdown causes errors in nucMLF axon pathfinding similar to those seen in a laminin-alpha1 mutant. However, in vivo time-lapse imaging reveals that while some defects in dynamic growth cone behavior are similar, there are also defects unique to the loss of each gene. Loss of either TAG-1 or laminin-alpha1 causes nucMLF axons to extend into surrounding tissue in incorrect directions and reduces axonal growth rate, resulting in stunted nucMLF axons that fail to extend beyond the hindbrain. However, defects in axon-axon interactions were found only after TAG-1 knockdown, while defects in initial nucMLF axon polarity and excessive branching of nucMLF axons occurred only in laminin-alpha1 mutants.

CONCLUSION

These results demonstrate how two guidance cues, TAG-1 and laminin-alpha1, influence the behavior of growth cones during axon pathfinding in vivo. Our data suggest that TAG-1 functions to allow growth cones to sense environmental cues and mediates positive axon-axon interactions. Laminin-alpha1 does not regulate axon-axon interactions, but does influence neuronal polarity and directional guidance.

A microfluidics-based turning assay reveals complex growth cone responses to integrated gradients of substrate-bound ECM molecules and diffusible guidance cues

Neuronal growth cones contain sophisticated molecular machinery precisely regulating their migration in response to complex combinatorial gradients of diverse external cues. The details of this regulation are still largely unknown, in part due to limitations of the currently available experimental techniques. Microfluidic devices have been shown to be capable of generating complex, stable and precisely controlled chemical gradients, but their use in studying growth cone migration has been limited in part due to the effects of shear stress. Here we describe a microfluidics-based turning-assay chip designed to overcome this issue. In addition to generating precise gradients of soluble guidance cues, the chip can also fabricate complex composite gradients of diffusible and surface-bound guidance cues that mimic the conditions the growth cones realistically counter in vivo. Applying this assay to Xenopus embryonic spinal neurons, we demonstrate that the presence of a surface-bound laminin gradient can finely tune the polarity of growth cone responses (repulsion or attraction) to gradients of brain-derived neurotrophic factor (BDNF), with the guidance outcome dependent on the mean BDNF concentration. The flexibility inherent in this assay holds significant potential for refinement of our understanding of nervous system development and regeneration, and can be extended to elucidate other cellular processes involving chemotaxis of shear sensitive cells.

Poly(HEMA) hydrogels with controlled pore architecture for tissue regeneration applications

The technique for fabrication of soft porous hydrogels, in which both the size and the orientation of inner pores can be controlled, was developed. Three-dimensional hydrophilic gels based on poly[2-hydroxyethyl methacrylate] are designed as scaffolds for regeneration of soft tissues, e.g., nerve tissue. Anisotropic macropores of the size ranging from 10 to 50 microm were formed (1) by using a porogen-leaching method with a solid organic porogen, (2) by phase-separation during gelation in solvent-nonsolvent mixture, or (3) by combination of solid porogen elimination and phase-separation. As a porogen, poly(L-lactide) fibers were applied and consequently washed away under mild conditions to obtain desired spatial orientation of pores. Highly water-swollen polymer gels were characterized with high pressure (low vacuum) scanning electron microscopy (AquaSEM). The morphology of voids remaining after removing the solid PLLA porogen (the macropores) was clearly shown.

Substrate-bound protein gradients for cell culture fabricated by microfluidic networks and microcontact printing

Graded distributions of proteins are pivotal for many signaling processes during development, such as morphogenesis, cell migration, and axon guidance. Here, we describe a technique to fabricate substrate-bound stepwise protein gradients by means of a microfluidic network etched into a silicon wafer with an array of parallel 14-micrometer-wide channels, which can be filled with a series of arbitrarily chosen protein solutions. In a subsequent microcontact printing step, the protein pattern is transferred onto a surface and is used as a substrate for cell culture. Cellular responses to a defined microscopic pattern of a protein, such as guided axonal outgrowth and directed migration, cell polarization, changes in morphology, and signaling, can be thus studied in a controlled in vitro environment.

Smart Polymeric Gels: Redefining the Limits of Biomedical Devices

This review describes recent progresses in the development and applications of smart polymeric gels, especially in the context of biomedical devices. The review has been organized into three separate sections: defining the basis of smart properties in polymeric gels; describing representative stimuli to which these gels respond; and illustrating a sample application area, namely, microfluidics. One of the major limitations in the use of hydrogels in stimuli-responsive applications is the diffusion rate limited transduction of signals. This can be obviated by engineering interconnected pores in the polymer structure to form capillary networks in the matrix and by downscaling the size of hydrogels to significantly decrease diffusion paths. Reducing the lag time in the induction of smart responses can be highly useful in biomedical devices, such as sensors and actuators. This review also describes molecular imprinting techniques to fabricate hydrogels for specific molecular recognition of target analytes. Additionally, it describes the significant advances in bottom-up nanofabrication strategies, involving supramolecular chemistry. Learning to assemble supramolecular structures from nature has led to the rapid prototyping of functional supramolecular devices. In essence, the barriers in the current performance potential of biomedical devices can be lowered or removed by the rapid convergence of interdisciplinary technologies.

Crk-associated substrate (Cas) signaling protein functions with integrins to specify axon guidance during development

Members of the Cas family of Src homology 3 (SH3)-domain-containing cytosolic signaling proteins are crucial regulators of actin cytoskeletal dynamics in non-neuronal cells; however, their neuronal functions are poorly understood. Here, we identify a Drosophila Cas (DCas), find that Cas proteins are highly expressed in neurons and show that DCas is required for correct axon guidance during development. Functional analyses reveal that Cas specifies axon guidance by regulating the degree of fasciculation among axons. These guidance defects are similar to those observed in integrin mutants, and genetic analysis shows that integrins function together with Cas to facilitate axonal defasciculation. These results strongly support Cas proteins working together with integrins in vivo to direct axon guidance events.

Microcontact printing of axon guidance molecules for generation of graded patterns

Microcontact printing (microCP) of proteins has been successfully used for patterning surfaces in various contexts. Here we describe a simple 'lift-off' method to print precise patterns of axon guidance molecules, which are used as substrate for growing chick retinal ganglion cell (RGC) axons. Briefly, the etched pattern of a silicon master is transferred to a protein-coated silicone cuboid (made from polydimethylsiloxane, PDMS), which is then used as a stamp on a glass coverslip. RGC explants are placed adjacent to the pattern and cultured overnight. Fluorescent labeling of the printed proteins allows the quantitative analysis of the interaction of axons and growth cones with single protein dots and of the overall outgrowth and guidance rate in variously designed patterns. Patterned substrates can be produced in 3-4 h and are stable for up to one week at 4 degrees C; the entire protocol can be completed in 3 d.

Covalent surface chemistry gradients for presenting bioactive peptides

The activation of surfaces by covalent attachment of bioactive moieties is an important strategy for improving the performance of biomedical materials. Such techniques have also been used as tools to study cellular responses to particular chemistries of interest. The creation of gradients of covalently bound chemistries is a logical extension of this technique. Gradient surfaces may permit the rapid screening of a large range of concentrations in a single experiment. In addition, the biological response to the gradient itself may provide new information on receptor requirements and cell signaling. The current work describes a rapid and flexible technique for the covalent addition of bioactive peptide gradients to a surface or gel and a simple fluorescence technique for assaying the gradient. In this technique, bioactive peptides with a terminal cysteine are bound via a heterobifunctional coupling agent to primary amine-containing surfaces and gels. A gradient in the coupling agent is created on the surfaces or gels by varying the residence time of the coupling agent across the surface or gel, thereby controlling the extent of reaction. We demonstrate this technique using poly(l-lysine)-coated glass surfaces and fibrin gels. Once the surface or gel has been activated by the addition of the coupling agent gradient, the bioactive peptide is added. Quantitation of the gradient is achieved by measuring the reaction kinetics of the coupling agent with the surface or gel of interest. This can be done either by fluorescently labeling the coupling agent (in the case of surfaces) or by spectrophotometrically detecting the release of pyridine-2-thione, which is produced when the thiol-reactive portion of the coupling agent reacts. By these methods, we can obtain reasonably precise estimates for the peptide gradients without using expensive spectroscopic or radiolabeling techniques. Validation with changes in fibroblast cell migration behavior across a bioactive peptide gradient illustrates preservation of peptide function as well as the usefulness of this technique.

Spatially patterned gene delivery for localized neuron survival and neurite extension

Natural tissues can have complex architectures, which arise in part from spatial patterns in gene expression. Regenerative strategies for damaged tissue must recreate these architectures to restore function. In this article, we demonstrate spatially controlled gene delivery from a substrate for directing cellular processes. Non-viral vectors were immobilized to substrates in linear patterns using microfluidic techniques, and cells cultured on the surface had localized gene expression within the cell population. Transfection was achieved in pattern widths as low as 100 mum, with efficiencies dependent on the microchannel treatment and vector concentration. The ability of patterned expression to localize cellular processes was investigated using a neuronal co-culture model. Patterned expression of the diffusible neurotrophic factor nerve growth factor initiated neuron survival and neurite out-growth primarily within the pattern, which decreased significantly in regions directly adjacent to the pattern. Primary neurite density was significantly greater on patterned substrates than on surfaces without patterns. This approach demonstrates the basic technology to create patterns of gene expression that can direct tissue formation and could be employed in regenerative strategies to recreate the complex cellular architectures observed in tissues.

Anisotropic scaffolds facilitate enhanced neurite extension in vitro

Tissue engineering (TE) techniques to enhance nerve regeneration following nerve damage have had limited success in matching the performance of autografts across short nerve gaps (< 10 mm). For regeneration over longer nerve gaps, TE techniques have been less successful than autografts. Most engineered scaffolds do not present directional cues to the regenerating nerves. In our efforts to design a TE scaffold to replace the autograft, we hypothesize that anisotropic hydrogel scaffolds with gradients of a growth-promoting glycoprotein, laminin-1 (LN-1), may promote directional neurite extension and enhance regeneration. In this study we report the engineering of three-dimensional (3D) agarose scaffolds with photoimmobilized gradients of LN-1 of differing slopes. Dorsal root ganglia (DRG) from chicken embryos were cultured in the agarose scaffolds and their neurite extension rate was determined. DRG neurite extension rates were significantly higher in the anisotropic scaffolds, with a maximal growth rate in an anisotropic scaffold twice that of the maximal growth rate in isotropic scaffolds of LN-1. We suggest that these anisotropic scaffolds, presenting an optimal gradient of LN-1, may significantly impact nerve regeneration. Such anisotropic scaffolds may represent a new generation of tissue engineered materials with built-in directional cues for guided tissue or nerve regeneration.

Anisotropic three-dimensional peptide channels guide neurite outgrowth within a biodegradable hydrogel matrix

The objective of this study was to investigate the neurite guidance potential of concentration gradients of glycine-arginine-glycine-aspartic acid-serine (GRGDS) oligopeptides immobilized within three-dimensional patterned cylindrical volumes created in a biodegradable nerve guidance matrix. This was achieved using ultraviolet (UV) laser micropatterning of a hyaluronan (HA) hydrogel matrix modified with S-2-nitrobenzyl cysteine. Upon exposure to focused laser light, the 2-nitrobenzyl group was cleaved, exposing thiol groups which reacted with maleimide-terminated GRGDS exclusively within these laser-defined volumes. We show that the UV laser micropatterning technique can be used to create GRGDS peptide concentration gradients within the oligopeptide channels and that these channels guide neurite outgrowth from primary neural cells.

Synthesis of cell-adhesive dextran hydrogels and macroporous scaffolds

Dextran hydrogels have been previously investigated as drug delivery vehicles and more recently as macroporous scaffolds; however, the non-cell-adhesive nature of dextran has limited its utility for tissue engineering. To overcome this limitation, macroporous scaffolds of methacrylated dextran (Dex-MA) copolymerized with aminoethyl methacrylate (AEMA) were synthesized, thereby introducing primary amine groups for covalent immobilization of extracellular-matrix-derived peptides. The amino group density for hydrogels copolymerized with 0.5 wt% AEMA was found to be 36.1+/-0.4 micromol/cm(3) by elemental analysis. To further enhance cellular interaction, poly(Dex-MA-co-AEMA) hydrogels were modified with either CRGDS or a mixture of CDPGYIGSR and CQAASIKVAV (1:1, v/v) using sulfo-(N-maleimidomethyl)cyclohexane-1-carboxylate (sulfo-SMCC). The immobilized peptide concentration was determined using amino acid analysis at: 2.6+/-0.9 micromol/cm(3) for CRGDS-derived hydrogels and 2.2+/-0.3 micromol/cm(3) plus 1.9+/-0.2 micromol/cm(3) for CDPGYIGSR plus CQAASIKVAV-derived hydrogels, respectively. Cellular interactions of primary embryonic chick dorsal root ganglia (DRGs) were compared on the hydrogels. Cell adhesion and neurite outgrowth on poly(Dex-MA) increased with copolymerization of AEMA and further improved with peptide modification and significantly for CDPGYIGSR/CQAASIKVAV-derived poly(Dex-MA-co-AEMA) hydrogels. Moreover, DRGs penetrated within the first 600 microm of the scaffolds, thereby demonstrating the potential of this scaffold for guided cell and axonal regeneration in vivo.

Zebrafish bashful/laminin-alpha 1 mutants exhibit multiple axon guidance defects

Laminin is known to provide a highly permissive substratum and in some cases directional information for axon outgrowth in vitro. However, there is still little known about laminin function in guiding axons in vivo. We investigated the axon guidance role of laminin-alpha1 in the developing zebrafish nervous system. Analysis of zebrafish bashful (bal)/laminin-a1 mutants revealed multiple functions for laminin-alpha1 in the outgrowth and guidance of central nervous system (CNS) axons. Most CNS axon pathways are defective in bal embryos. Some axon types, including retinal ganglion cell axons, early forebrain axons, and hindbrain reticulospinal axons, make specific pathfinding errors, suggesting laminin-alpha1 is required for directional decisions. Other axon tracts are defasciculated or not fully extended in bal embryos, suggesting a function for laminin-alpha1 in regulating adhesion or providing a permissive substratum for growth. In addition, some neurons have excessively branched axons in bal, indicating a potential role for laminin-alpha1 in branching. In contrast to CNS axons, most peripheral axons appear normal in bal mutants. Our results, thus, reveal important and diverse functions for laminin-alpha1 in guiding developing axons in vivo.

Effects of substrate geometry on growth cone behavior and axon branching

At the leading edge of a growing axon, the growth cone determines the path the axon takes and also plays a role in the formation of branches, decisions that are regulated by a complex array of chemical signals. Here, we used microfabrication technology to determine whether differences in substrate geometry, independent of changes in substrate chemistry, can modulate growth cone motility and branching, by patterning a polylysine grid of narrow (2 or 5 microm wide) intersecting lines. The shape of the intersections varied from circular nodes 15 microm in diameter to simple crossed lines (nodeless intersections). Time-lapse recordings of cultured hippocampal neurons showed that simple variations in substrate geometry changed growth cone shape, and altered the rate of growth and the probability of branching. When crossing onto a node intersection the growth cone paused, often for hours, and microtubules appeared to defasciculate. Once beyond the node, filopodia and lamellipodia persisted at that site, sometimes forming a collateral branch. At nodeless intersections, the growth cone passed through with minimal hesitation, often becoming divided into separate areas of motility that led to the growth of separate branches. When several lines intersected at a common point, growth cones sometimes split into several subdivisions, resulting in the emergence of as many as five branches. Such experiments revealed an intrinsic preference for branches to form at angles less than 90 degrees . These data show that simple changes in the geometry of a chemically homogeneous substrate are detected by the growth cone and can regulate axonal growth and the formation of branches.