The molecular structures of starch components and their contribution to the architecture of starch granules: A comprehensive review

Morpho-chemical characterization of individual ancient starches retrieved on ground stone tools from Palaeolithic sites in the Pontic steppe

Despite the extensive literature on the retrieval of digestible starches from archaeological contexts, there are still significant concerns regarding their genuine origin and durability. Here, we propose a multi-analytical strategy to identify the authenticity of ancient starches retrieved from macrolithic tools excavated at Upper Paleolithic sites in the Pontic steppe. This strategy integrates the morphological discrimination of starches through optical microscopy and scanning electron microscopy with single starch chemo-profiling using Fourier transform infrared imaging and microscopy. We obtained evidence of aging and biomineralization in the use-related starches from Palaeolithic sites, providing a methodology to establish their ancient origin, assess their preservation status, and attempt their identification. The pivotal application of this multidisciplinar approach demonstrates that the macrolithic tools, from which starches were dislodged, were used for food-processing across the Pontic Steppe around 40,000 years ago during the earliest colonization of Eurasia by Homo sapiens.

Granular architecture of lotus seed starch and its impact on physicochemical properties

Lotus seed starch has high apparent amylose content (AAM). A representative definition of its granular architecture (e.g., lamellar structure) remained absent. This study defined the granular shape, crystalline and lamellar structures, and digestibility of twenty-two samples of lotus seed starch (LS) by comparing with those of potato and maize starches. LS granules had more elongated shape and longer repeat distance of lamellae than potato and maize starch granules. The enzymatic susceptibility of LS granules was more affected by AAM than granular architecture. Using these LSs as a model system, the relationships between lamellar structure of starch granules and properties of their gelatinized counterparts were investigated. In LSs, thinner amorphous lamella and thicker crystalline lamella were associated with higher swelling power and yield stress. The relationships were found to be connected via certain structural characteristics of amylopectin.

Location of the photosynthetic carbon metabolism in microcompartments and separated phases in microalgal cells

Carbon acquisition, assimilation and storage in eukaryotic microalgae and cyanobacteria occur in multiple compartments that have been characterised by the location of the enzymes involved in these functions. These compartments can be delimited by bilayer membranes, such as the chloroplast, the lumen, the peroxisome, the mitochondria or monolayer membranes, such as lipid droplets or plastoglobules. They can also originate from liquid-liquid phase separation such as the pyrenoid. Multiple exchanges exist between the intracellular microcompartments, and these are reviewed for the CO2 concentration mechanism, the Calvin-Benson-Bassham cycle, the lipid metabolism and the cellular energetic balance. Progress in microscopy and spectroscopic methods opens new perspectives to characterise the molecular consequences of the location of the proteins involved, including intrinsically disordered proteins.

Physicochemical Properties of Granular and Gelatinized Lotus Rhizome Starch with Varied Proximate Compositions and Structural Characteristics

As a traditional and popular dietary supplement, lotus rhizome starch (LRS) has health benefits for its many nutritional components and is especially suitable for teenagers and seniors. In this paper, the approximate composition, apparent amylose content (AAC), and structural characteristics of five LRS samples from different regions were investigated, and their correlations with the physicochemical properties of granular and gelatinized LRS were revealed. LRS exhibited rod-shaped and ellipsoidal starch granules, with AAC ranging from 26.6% to 31.7%. LRS-3, from Fuzhou, Jiangxi Province, exhibited a deeper hydrogel color and contained more ash, with 302.6 mg/kg iron, and it could reach the pasting temperature of 62.6 °C. In comparison, LRS-5, from Baoshan, Yunnan Province, exhibited smoother granule surface, less fragmentation, and higher AAC, resulting in better swelling power and freeze-thaw stability. The resistant starch contents of LRS-3 and LRS-5 were the lowest (15.3%) and highest (69.7%), respectively. The enzymatic digestion performance of LRS was positively correlated with ash content and short- and long-term ordered structures but negatively correlated with AAC. Furthermore, the color and network firmness of gelatinized LRS was negatively correlated with its ash content, and the retrograde trend and freeze-thaw stability were more closely correlated with AAC and structural characteristics. These results revealed the physicochemical properties of LRS from different regions and suggested their advantages in appropriate applications as a hydrogel matrix.

Understanding CaCl2 induces surface gelatinization to promote cold plasma modified maize starch: Structure-effect relations

To investigate the influence of surface gelatinization on cold plasma (CP) modification of starch, this study used CaCl2 to modify maize starch by surface gelatinization, further combined with CP treatment and characterized its multi-scale structure and physicochemical properties. The results revealed that starch surface gelatinization causes roughness and fragmentation on the granule surface, and CP undergoes etching effects. The synergistic modification promotes starch degradation, as evidenced by molecular weight decrease and short-chain ratio increase. Although the growth rings, FT-IR patterns, and crystal types of starch remained unchanged, the synergistic modification induced a reduction in the short-range orderliness and crystallinity of starch, thus causing a decrease in the pasting properties and contributing to its solubility. Notably, the CP treatment improved the RDS and SDS contents of the gelatinized starch due to more active sites on the granule surface after gelatinization, and this finding may provide insight into the deep processing of starch.

Impact of long-term ultrasound treatment on structural and physicochemical properties of starches differing in granule size

Granule size is a critical parameter affecting starch processing properties. Ultrasound treatments of up to 22 h were applied on two starches differing in granule size (quinoa starch and maize starch). The two starches showed significantly different trends in both structural and physicochemical aspects affected by the ultrasound treatments. For the small granule starch (volume-weighted mean particle size of 1.79 μm), short-term ultrasonication caused an increase of swelling power. As the treatment time increased, the physicochemical properties were influenced by the degradation of amylopectin external chains. The X-ray diffraction results showed a decrease of relative crystallinity and changes of peak areas with long-term treatment. On the other hand, a balance between amylose leaching and surface damages was seen for the large granule starch (volume-weighted mean particle size of 18.3 μm). The effect of ultrasound modification on starches with different molecular and granular structures was discussed. A possible mechanism of the ultrasound effect was proposed.

Short-chain glucan self-assembly for green synthesis of functional biomaterials: Mechanism, synthesis, and microstructural control

Short-chain glucan (SCG) is a linear homopolymer containing 10 to 50 glucose units linked with α(1,4) glycosidic bonds. With its abundant, low-cost, nontoxic, biodegradable/biocompatible nature, self-assembled SCG particles (SSC) have emerged as functional biomaterials, which have recently attracted tremendous attentions in various fields. SCG self-assembly occurs through the spontaneous association of molecules under equilibrium conditions into stable and structurally well-defined nanoscale or micrometer-scale aggregates, which is governed by various intermolecular non-covalent interactions, including hydrogen-bonding, electrostatic, hydrophobic, and van der Waals. With precise and effective control of the self-assembly process of SSC, its structural modulation and function integration can be expected. Thus, we convinced that SCG self-assembly could provide an effective means of developing starch-based functional biomaterials with beneficial health properties and wide application in food industries. In this review, we provide an overview of recent advances in the green approach for the self-assembly of SSC, as well as the influence of thermodynamic and kinetic factors on its morphology and physicochemical properties. We highlight recent contributions to developing strategies for the construction of SSC with increasing complexity and functionality that are suitable for a variety of food applications. Finally, we briefly outline our perspectives and discuss the challenges in the field.

Recent preparation, modification and application progress of starch nanocrystals: A review

Due to the advantages of wide sources, high biocompatibility and favorable biodegradability, starch nanocrystals (SNCs) have gradually attracted attention and have bright development prospects in food, agriculture, materials, medicine and other fields. However, the traditional preparation method of SNCs is time-consuming and inefficient, and the physicochemical properties cannot fully meet the needs of multiple applications. Fortunately, the unique onion-like structure of starch granules and the large number of hydroxyl groups present on the surface entitle SNCs to efficient preparation and modification. This paper comprehensively reviewed the improvement methods of SNCs preparation process in recent years, and the advantages and disadvantages of the two improvement strategies were compared. Besides, the importance of introducing different pretreatment methods into the SNCs preparation process was emphasized. It also focused on the different modification treatment and application progress of SNCs, especially in the starch-based surface coating of fruits and vegetables. The information will contribute to further improve the preparation efficiency and physicochemical properties of SNCs, and ultimately expand the application field.

Highly stable and versatile α-amylase from Anoxybacillus vranjensis ST4 suitable for various applications

α-Amylase from the thermophilic bacterial strain Anoxybacillus vranjensis ST4 (AVA) was cloned into the pMALc5HisEk expression vector and successfully expressed and purified from the Escherichia coli ER2523 host strain. AVA belongs to the GH13_5 subfamily of glycoside hydrolases and has 7 conserved sequence regions (CSRs) distributed in three distinct domains (A, B, C). In addition, there is a starch binding domain (SBD) from the CBM20 family of carbohydrate binding modules (CBMs). AVA is a monomer of 66 kDa that achieves maximum activity at 60-80 °C and is active and stable over a wide pH range (4.0-9.0). AVA retained 50 % of its activity after 31 h of incubation at 60 °C and was resistant to a large number of denaturing agents. It hydrolyzed starch granules very efficiently, releasing maltose, maltotriose and maltopentaose as the main products. The hydrolysis rates of raw corn, wheat, horseradish, and potato starch, at a concentration of 10 %, were 87.8, 85.9, 93.0, and 58 %, respectively, at pH 8.5 over a 3 h period. This study showed that the high level of expression as well as the properties of this highly stable and versatile enzyme show all the prerequisites for successful application in industry.

Soluble and insoluble α-glucan synthesis in yeast by enzyme suites derived exclusively from maize endosperm

Molecular mechanisms that distinguish the synthesis of semi-crystalline α-glucan polymers found in plant starch granules from the synthesis of water-soluble polymers by nonplant species are not well understood. To address this, starch biosynthetic enzymes from maize (Zea mays L.) endosperm were isolated in a reconstituted environment using yeast (Saccharomyces cerevisiae) as a test bed. Ninety strains were constructed containing unique combinations of 11 synthetic transcription units specifying maize starch synthase (SS), starch phosphorylase (PHO), starch branching enzyme (SBE), or isoamylase-type starch debranching enzyme (ISA). Soluble and insoluble branched α-glucans accumulated in varying proportions depending on the enzyme suite, with ISA function stimulating distribution into the insoluble form. Among the SS isoforms, SSIIa, SSIII, and SSIV individually supported the accumulation of glucan polymer. Neither SSI nor SSV alone produced polymers; however, synergistic effects demonstrated that both isoforms can stimulate α-glucan accumulation. PHO did not support α-glucan production by itself, but it had either positive or negative effects on polymer content depending on which SS or a combination thereof was present. The complete suite of maize enzymes generated insoluble particles resembling native starch granules in size, shape, and crystallinity. Ultrastructural analysis revealed a hierarchical assembly starting with subparticles of approximately 50 nm diameter that coalesce into discrete structures of approximately 200 nm diameter. These are assembled into semi-crystalline α-glucan superstructures up to 4 μm in length filling most of the yeast cytosol. ISA was not essential for the formation of such particles, but their abundance was increased dramatically by ISA presence.

Metal ion-mediated modulation of morphology, physicochemical properties, and digestibility of type 3 resistant starch microparticle

Short-chain glucan (SCG) derived from debranched amylopectin has emerged as a promising candidate for the production of resistant starch particle (RSP) due to its controllable self-assembly features. Here, we investigated the effect of metal cations with different valencies and concentrations on the morphology, physicochemical properties, and digestibility of RSP formed by the self-assembly of SCG. The effect of cations on the formation of RSP followed the valency in the following order: Na⁺, Ka⁺, Mg²⁺, Ca²⁺, Fe³⁺, and Al³⁺, of which 10 mM trivalent cations increased the particle size of RSP over 2 μm and considerably decreased the crystallinity by 49.5 % ~ 50.9 %, which were significantly different from that of mono- and divalent ones. Importantly, RSP formed with divalent cations switched the surface charge from -18.6 mV to 12.9 mV, which significantly increased the RS level, indicating that metal cations would be useful for regulating physicochemical properties and digestibility of RSP.

Structural and Functional Properties of Porous Corn Starch Obtained by Treating Raw Starch with AmyM

Porous starch is attracting considerable attention for its high surface area and shielding ability, properties which are useful in many food applications. In this study, native corn starch with 15, 25, and 45% degrees of hydrolysis (DH-15, DH-25, and DH-45) were prepared using a special raw starch-digesting amylase, AmyM, and their structural and functional properties were evaluated. DH-15, DH-25, and DH-45 exhibited porous surface morphologies, diverse pore size distributions and pore areas, and their adsorptive capacities were significantly enhanced by improved molecular interactions. Structural measures showed that the relative crystallinity decreased as the DH increased, while the depolymerization of starch double helix chains promoted interactions involving disordered chains, followed by chain rearrangement and the formation of sub-microcrystalline structures. In addition, DH-15, DH-25, and DH-45 displayed lower hydrolysis rates, and DH-45 showed a decreased C∞ value of 18.9% with higher resistant starch (RS) content and lower glucose release. Our results indicate that AmyM-mediated hydrolysis is an efficient pathway for the preparation of porous starches with different functionalities which can be used for a range of applications.

Effect of Ball-Milling on Starch Crystalline Structure, Gelatinization Temperature, and Rheological Properties: Towards Enhanced Utilization in Thermosensitive Systems

Starch's crystalline structure and gelatinization temperature might facilitate or hinder its use. Ball milling has frequently been mentioned in the literature as a method for reducing starch size and as a more environmentally friendly way to change starch, such as by increasing surface area and reactivity, which has an impact on other starch properties. In this study, starch samples were milled for varying durations (1, 5, 10, 20, and 30 h) and at different starch-to-ball mass ratios (1:6 and 1:20). Microscopy and XRD revealed that prolonged milling resulted in effective fragmentation and a decrease in crystallinity of the starch granules. Increasing milling times resulted in an increase in amylose content. Rheology and thermal studies revealed that gelatinization temperatures dropped with milling duration and that viscosity and thixotropy were directly influenced. The samples milled for 10, 20, and 30 h at a ratio of 1:20 were the most fragmented and upon drying formed a transparent film at ambient temperature, because of the lower gelatinization temperature. Starch ball milling could lead to the use of this material in thermosensitive systems.

Starch Modification with Molecular Transformation, Physicochemical Characteristics, and Industrial Usability: A State-of-the-Art Review

Starch is a readily available and abundant source of biological raw materials and is widely used in the food, medical, and textile industries. However, native starch with insufficient functionality limits its utilization in the above applications; therefore, it is modified through various physical, chemical, enzymatic, genetic and multiple modifications. This review summarized the relationship between structural changes and functional properties of starch subjected to different modified methods, including hydrothermal treatment, microwave, pre-gelatinization, ball milling, ultrasonication, radiation, high hydrostatic pressure, supercritical CO₂, oxidation, etherification, esterification, acid hydrolysis, enzymatic modification, genetic modification, and their combined modifications. A better understanding of these features has the potential to lead to starch-based products with targeted structures and optimized properties for specific applications.

Microwave-Induced Behavior and Digestive Properties of the Lotus Seed Starch-Chlorogenic Acid Complex

The effect of chlorogenic acid (CA) on the dielectric response of lotus seed starch (LS) after microwave treatment, the behavior and digestive characteristics of the resulting starch/chlorogenic acid complex (LS-CA) at different degrees of gelatinization and the inhibition of α-amylase by chlorogenic acid were investigated. The variation in dielectric loss factor, ε″, and dielectric loss tangent, tanδε, of the microwave thermal conversion indicated that LS-CA had a more efficient microwave-energy-to-thermal-energy conversion efficiency than LS. This gelatinized LS-CA to a greater extent at any given temperature between 65 and 85 °C than LS, and it accelerated the degradation of the starch crystalline structure. The greater disruption of the crystal structure decreased the bound water content and increased the thermal stability of LS-CA compared to LS. The simulated in vitro digestion found that the presence of the LS-CA complex improved the slow-digestion property of lotus seed starch by increasing its content of resistant and slowly digested starch. In addition, the release of chlorogenic acid during α-amylase hydrolysis further slowed starch digestion by inhibiting α-amylase activity. These findings provide a foundation for understanding the correlation between the complex behavior and digestive properties of naturally polyphenol-rich, starch-based foods, such as LS, under microwave treatment, which will facilitate the development of starch-based foods with tailored digestion rates, lower final degrees of hydrolysis and glycemic indices.

Advances in Starch Nanoparticle for Emulsion Stabilization

Starch nanoparticles (SNPs) are generally defined as starch grains smaller than 600-1000 nm produced from a series of physical, chemical, or biologically modified starches. Many studies have reported the preparation and modification of SNPs, which are mostly based on the traditional "top-down" strategy. The preparation process generally has problems with process complexity, long reaction periods, low yield, high energy consumption, poor repeatability, etc. A "bottom-up" strategy, such as an anti-solvent method, is proven to be suitable for the preparation of SNPs, and they are synthesized with small particle size, good repeatability, a low requirement on equipment, simple operation, and great development potential. The surface of raw starch contains a large amount of hydroxyl and has a high degree of hydrophilicity, while SNP is a potential emulsifier for food and non-food applications.

Enhancing Oil Recovery by Polymeric Flooding with Purple Yam and Cassava Nanoparticles

Significant amounts of oil remain in the reservoir after primary and secondary operations, and to recover the remaining oil, enhanced oil recovery (EOR) can be applied as one of the feasible options remaining nowadays. In this study, new nano-polymeric materials have been prepared from purple yam and cassava starches. The yield of purple yam nanoparticles (PYNPs) was 85%, and that of cassava nanoparticles (CSNPs) was 90.53%. Synthesized materials were characterized through particle size distribution (PSA), Zeta potential distribution, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The performance of PYNPs in recovering oil was better than CSNPs, as found from the recovery experiments. Zeta potential distribution results confirmed the stability of PYNPs over CSNPs (-36.3 mV for PYNPs and -10.7 mV for CSNPs). The optimum concentration for these nanoparticles has been found from interfacial tension measurements and rheological properties, and it was 0.60 wt.% for PYNPs and 0.80 wt.% for CSNPs. A more incremental recovery (33.46%) was achieved for the polymer that contained PYNPs in comparison to the other nano-polymer (31.3%). This paves the way for a new technology for polymer flooding that may replace the conventional method, which depends on partially hydrolyzed polyacrylamide (HPAM).

Impact of crystalline structure on the digestibility of amylopectin-based starch-lipid complexes

In this study, chain-elongated waxy corn starch (mWCS) was complexed with lauric acid (LA) to produce starch-lipid complexes (mWCS@LA) with a mixture of B- and V-type crystalline structures. Results from in vitro digestion showed that mWCS@LA had higher digestibility than mWCS, and the logarithm of slope plots of mWCS@LA revealed a two-stage digestion pattern, with digestion rate of the first stage (k₁ = 0.038 min^-1) being much higher than that of the following stage (k₂ = 0.0116 min^-1). The complexation between the long branch chains of mWCS and LA formed amylopectin-based V-type crystallites that were rapidly hydrolyzed during the first stage. The digesta isolated from the second stage of digestion had a B-type crystallinity of 52.6 %, and starch chains with degree of polymerization of 24-28 mainly contributed to the formation of the B-type crystalline structure. The results from the present study reveal that the B-type crystallites were more resistant to amylolytic hydrolysis than the amylopectin-based V-type crystallites.

The effect of chitosan oligosaccharides on the shelf-life and quality of fresh wet noodles

In this study, the effects of chitosan oligosaccharides (COS) on the microbial stability and quality properties of fresh wet noodles were evaluated. The addition of COS prolonged the shelf-life of fresh wet noodles at 4 °C by 3-6 days and effectively inhibited the growth of acidity value. However, the presence of COS increased the cooking loss of noodles significantly (P < 0.05) and decreased the hardness as well as tensile strength significantly (P < 0.05). The enthalpy of gelatinization (ΔH) was decreased by COS in the differential scanning calorimetry (DSC) analysis. Meanwhile, the addition of COS decreased the relative crystallinity of starch (from 24.93 % to 22.38 %) without changing the type of X-ray diffraction pattern, revealing that COS weakened the structural stability of starch. In addition, COS was observed to impair the development of compact gluten network by confocal laser scanning micrographs. Further, the free-sulfhydryl groups content and sodium dodecyl sulphate-extractable protein (SDS-EP) values of cooked noodles increased significant (P < 0.05), confirming the obstruction on the polymerization of gluten proteins during the hydrothermal process. Although COS adversely affected the quality of noodles, it was outstanding and feasible for the preservation of fresh wet noodles.

BE3 is the major branching enzyme isoform required for amylopectin synthesis in Chlamydomonas reinhardtii

Starch-branching enzymes (BEs) are essential for starch synthesis in both plants and algae where they influence the architecture and physical properties of starch granules. Within Embryophytes, BEs are classified as type 1 and type 2 depending on their substrate preference. In this article, we report the characterization of the three BE isoforms encoded in the genome of the starch producing green algae Chlamydomonas reinhardtii: two type 2 BEs (BE2 and BE3) and a single type 1 BE (BE1). Using single mutant strains, we analyzed the consequences of the lack of each isoform on both transitory and storage starches. The transferred glucan substrate and the chain length specificities of each isoform were also determined. We show that only BE2 and BE3 isoforms are involved in starch synthesis and that, although both isoforms possess similar enzymatic properties, BE3 is critical for both transitory and storage starch metabolism. Finally, we propose putative explanations for the strong phenotype differences evidenced between the C. reinhardtii be2 and be3 mutants, including functional redundancy, enzymatic regulation or alterations in the composition of multimeric enzyme complexes.

LIKE EARLY STARVATION 1 and EARLY STARVATION 1 promote and stabilize amylopectin phase transition in starch biosynthesis

Starch, the most abundant carbohydrate reserve in plants, primarily consists of the branched glucan amylopectin, which forms semi-crystalline granules. Phase transition from a soluble to an insoluble form depends on amylopectin architecture, requiring a compatible distribution of glucan chain lengths and a branch-point distribution. Here, we show that two starch-bound proteins, LIKE EARLY STARVATION 1 (LESV) and EARLY STARVATION 1 (ESV1), which have unusual carbohydrate-binding surfaces, promote the phase transition of amylopectin-like glucans, both in a heterologous yeast system expressing the starch biosynthetic machinery and in Arabidopsis plants. We propose a model wherein LESV serves as a nucleating role, with its carbohydrate-binding surfaces helping align glucan double helices to promote their phase transition into semi-crystalline lamellae, which are then stabilized by ESV1. Because both proteins are widely conserved, we suggest that protein-facilitated glucan crystallization may be a general and previously unrecognized feature of starch biosynthesis.

Interfacial Catalysis during Amylolytic Degradation of Starch Granules: Current Understanding and Kinetic Approaches

Enzymatic hydrolysis of starch granules forms the fundamental basis of how nature degrades starch in plant cells, how starch is utilized as an energy resource in foods, and develops efficient, low-cost saccharification of starch, such as bioethanol and sweeteners. However, most investigations on starch hydrolysis have focused on its rates of degradation, either in its gelatinized or soluble state. These systems are inherently more well-defined, and kinetic parameters can be readily derived for different hydrolytic enzymes and starch molecular structures. Conversely, hydrolysis is notably slower for solid substrates, such as starch granules, and the kinetics are more complex. The main problems include that the surface of the substrate is multifaceted, its chemical and physical properties are ill-defined, and it also continuously changes as the hydrolysis proceeds. Hence, methods need to be developed for analyzing such heterogeneous catalytic systems. Most data on starch granule degradation are obtained on a long-term enzyme-action basis from which initial rates cannot be derived. In this review, we discuss these various aspects and future possibilities for developing experimental procedures to describe and understand interfacial enzyme hydrolysis of native starch granules more accurately.

Main Characteristics of Processed Grain Starch Products and Physicochemical Features of the Starches from Maize (Zea mays L.) with Different Genotypes

To understand the relationship between the genotype of maize plants and differences in their origin and the ploidy of the genome, which carry gene alleles programming the biosynthesis of various starch modifications, the thermodynamic and morphological features of starches from the grains of these plants have been studied. This study investigated the peculiarities of starch extracted from subspecies of maize (the dry matter mass (DM) fraction, starch content in grain DM, ash content in grain DM, and amylose content in starch) belonging to different genotypes within the framework of the program for the investigation of polymorphism of the world collection of plant genetic resources VIR. Among the starch genotypes of maize studied, four groups comprised the waxy (wx), conditionally high amylose ("ae"), sugar (su), and wild (WT) genotypes. Starches with an amylose content of over 30% conditionally belonged to the "ae" genotype. The starches of the su genotype had fewer starch granules than other investigated genotypes. An increase in amylose content in the investigated starches, accompanied by a decrease in their thermodynamic melting parameters, induced the accumulation of defective structures in the starches under study. The thermodynamic parameters evaluated for dissociation of the amylose-lipid complex were temperature (T_aml) and enthalpy (H_aml); for the su genotype, temperature and enthalpy values of dissociation of the amylose-lipid complex were higher than in the starches from the "ae" and WT genotypes. This study has shown that the amylose content in starch and the individual features of the maize genotype determine the thermodynamic melting parameters of the starches under study.

Physicochemical properties and molecular structure of lotus seed starch

Current understanding of physicochemical properties of lotus seed starch (LS) is scarce partly due to its largely unknown molecular structure. This study compared the physicochemical and molecular characteristics of LSs of a wide collection to those of conventional starches (potato (PS) and maize starches (MS)). Variations were found in the chemical composition, physicochemical properties, and molecular structure of LSs. Amylose content and weight-based ratio of short to long chains of amylopectin (APS:APL) were principal factors affecting the physicochemical properties of LSs from different origins. Compared with PS and MS, LSs had higher gelatinization temperatures, lower amylose leaching, and faster retrogradation. These unique properties of LSs were related to their molecular structure and chemical composition. LSs had higher amylose contents than PS and MS as evaluated by various methods. A majority of amylose chains in LS were longer than those in MS but were shorter than those in PS. The APS:APL of LSs were higher than that of MS but lower than that of PS. The results provided a structural basis for understanding the properties of LS and suggested that this unconventional starch may be complementary to conventional starches for industrial applications.

Purple red rice bran anthocyanins reduce the digestibility of rice starch by forming V-type inclusion complexes

Purple red rice bran, a by-product of the rice polishing process, contained abundant anthocyanins. However, most of them were discarded resulting in a waste of resources. This study investigated the effects of purple red rice bran anthocyanin extracts (PRRBAE) on the physicochemical properties and digestive properties of rice starch and its mechanism of action. Infrared spectroscopy and X-ray diffraction indicated that PRRBAE could interact with rice starch through non-covalent bonds to form intrahelical V-type complexes. The DPPH and ABTS⁺ assays showed that PRRBAE could confer better antioxidant activity on rice starch. In addition, the PRRBAE could increase the resistant starch content and decrease the enzyme activities by changing the tertiary and secondary structure of starch-digesting enzymes. Further, molecular docking suggested that aromatic amino acids play a key role in the interaction of starch-digesting enzymes with PRRBAE. These findings will contribute to a better understanding of the mechanism of PRRBAE reducing starch digestibility, and to the development of high value-added products and low glycemic index (GI) foods.

The Fluorescence Response of Four Crystalline Starches According to Ultrasound-Assisted Starch-Salicylic Acid Inclusions

Fluorescence has shown its superior performance in the fields of starch physicochemical properties, starch–based materials, and the interactions of starch with small molecules. However, it has not been well explored in the fluorescence characteristics of starch. Herein, the fluorescence properties of four crystalline starches (A–type tapioca starch, B–type potato starch, C–type pea starch, and V–type starch, prepared with corn starch and stearic acid) were investigated using salicylic acid (SA) as an indicator. The results of inverted fluorescence microscopy, Fourier transform infrared spectroscopy, and thermogravimetric analysis indicated that SA could be included by starch. X–ray diffraction analysis further demonstrated that the inclusion of SA did not change the crystalline of the four crystal types of starches, which could provide a prerequisite for comparing the different fluorescence properties of the four crystal types of starches. Fluorescence enhancements of the four inclusions were 264.5 (B–type), 206 (C–type), 51.2 (V–type), and 28 (A–type). These results provide new insights for analyzing the fluorescence response of starch.

Optimization of starch extraction from Amorphophallus paeoniifolius corms using response surface methodology (RSM) and artificial neural network (ANN) for improving yield with tenable chemical attributes

The development of the extraction process for improving the starch yield from unconventional plants is emerging as a topic of interest. In this respect, the present work aimed to optimize the starch extraction from the corms of elephant foot yam (Amorphophallus paeoniifolius) with the help of response surface methodology (RSM) and artificial neural network (ANN). The RSM model performed better than the ANN in predicting the starch yield with higher precision. In this connection, this study for the first time reports the significant improvement of starch yield from A. paeoniifolius (51.76 g/100 g of the corm dry weight). The extracted starch samples based on yield - high (APHS), medium (APMS), and low (APLS) exhibited a variable granule size (7.17-14.14 μm) along with low ash content, moisture content, protein, and free amino acid indicating purity and desirability. The FTIR analysis also confirmed the chemical composition and purity of the starch samples. Moreover, the XRD analysis showed the prevalence of C-type starch (2θ = 14.303°). Based on other physicochemical, biochemical, functional, and pasting properties, the three starch samples showed more or less similar characteristics thereby indicating the sustentation of beneficial attributes of starch molecules irrespective of the variation in extraction parameters.

Effect of protein-starch interactions on starch retrogradation and implications for food product quality

Starch retrogradation is a consequential part of food processing that greatly impacts the texture and acceptability of products containing both starch and proteins, but the effect of proteins on starch retrogradation has only recently been explored. With the increased popularity of plant-based proteins in recent years, incorporation of proteins into starch-based products is more commonplace. These formulation changes may have unforeseen effects on ingredient functionality and sensory outcomes of starch-containing products during storage, which makes the investigation of protein-starch interactions and subsequent impact on starch retrogradation and product quality essential. Protein can inhibit or promote starch retrogradation based on its exposed residues. Charged residues promote charge-dipole interactions between starch-bound phosphate and protein, hydrophobic groups restrict amylose release and reassociation, while hydrophilic groups impact water/molecular mobility. Covalent bonds (disulfide linkages) formed between proteins may enhance starch retrogradation, while glycosidic bonds formed between starch and protein during high-temperature processing may limit starch retrogradation. With these protein-starch interactions in mind, products can be formulated with proteins that enhance or delay textural changes in starch-containing products. Future work to understand the impact of starch-protein interactions on retrogradation should focus on integrating the fields of proteomics and carbohydrate chemistry. This interdisciplinary approach should result in better methods to characterize mechanisms of interaction between starch and proteins to optimize their food applications. This review provides useful interpretations of current literature characterizing the mechanistic effect of protein on starch retrogradation.

Novel Approach for Quantitative Characterization of Short-Range Molecular Order in Gelatinized Starch by X-ray Diffraction

A novel quantitative method was developed to characterize short-range molecular order in gelatinized wheat and potato starches using X-ray diffraction (XRD). Gelatinized starches with different amounts of short-range molecular order and amorphous starches with no short-range molecular order were prepared and characterized by the intensity and area of Raman spectral bands. The degree of short-range molecular order in the gelatinized wheat and potato starches decreased with increasing water content used for gelatinization. By comparing XRD patterns of gelatinized and amorphous starch, the XRD peak at 33° (2θ) was shown to be typical of gelatinized starch. The relative peak area (RPA), intensity, and full width at half-maximum (FWHM) of the XRD peak at 33° (2θ) decreased with the increase in water content for gelatinization. We propose that the RPA of the XRD peak at 33° (2θ) can be used to quantify the amount of short-range molecular order in gelatinized starch. The method developed in this study will help to explore and understand the relationship between the structure and functionality of gelatinized starch in food and nonfood applications.

Effects of lactic acid bacteria fermentation on the physicochemical and structural characteristics of starch in blends of glutinous and japonica rice

In this study, the effects of lactic acid bacteria (LAB) fermentation on the physicochemical and structural characteristics of mixed starches in blends of glutinous and japonica rice were investigated. Five starter cultures improved in varying degrees the hydration ability, transparency, and freeze-thaw stability of the mixed starches. Mixed starch I, prepared by fermentation of Lactobacillus acidophilus HSP001, exhibited optimal water-holding capacity, solubility, and swelling power. In comparison, mixed starches V and III involved fermentation of L. acidophilus HSP001 and Latilactobacillus sakei HSP002, using ratios of 2:1 and 1:1 to achieve higher transparency and freeze-thaw stability, respectively. The LAB-fermented, mixed starches exhibited excellent pasting properties due to their high peak viscosities and low setback values. Moreover, the viscoelasticity of mixed starches III-V, prepared by compound fermentation of L. acidophilus HSP001 and L. sakei HSP002 in ratios of 1:1, 1:2, and 2:1, respectively, proved superior to their single strain fermentation counterparts. Meanwhile, LAB fermentation resulted in reduced gelatinization enthalpy, relative crystallinity, and short-range ordered degree. Thus, the effects of five LAB starter cultures on mixed starches were inconsistent, but these results provide a theoretical basis for the application of mixed starches. PRACTICAL APPLICATION: Lactic acid bacteria was used to ferment blends of glutinous and japonica rice. Fermented mixed starch had better hydration, transparency, and freeze-thaw stability. Fermented mixed starch exhibited nice pasting properties and viscoelasticity. LAB fermentation corroded starch granules, leading to the decrease of ΔH. Relative crystallinity and short-range order of fermented mixed starch decreased.

Influences of high hydrostatic pressure on structures and properties of mung bean starch and quality of cationic starch

It is difficult to improve the quality of chemical-modified starch by traditional technology. Hence, in this study, mung bean starch with poor chemical activity was used as raw material, the native starch was treated and the cationic starch was prepared under high hydrostatic pressure (HHP) at 500 MPa and 40 °C. By studying the changes in the structure and properties of native starch after HHP treatment, the influence mechanism of HHP on improving the quality of cationic starch was analyzed. Results showed high pressure could make water and etherifying agent enter the starch granules through pores, and HHP made the structure of starch undergone three stages similar to mechanochemical effect. After HHP treated for 5 and 20 min, the degree of substitution, reaction efficiency and other qualities of cationic starch increased remarkably. Hence, proper HHP treatment could help to improve the chemical activity of starch and quality of cationic starch.

Modulation of the self-assembly kinetics and digestibility of type 3 resistant starch particles by co-crystallization with amino acid

The effect of eight different l-amino acids (L-AA) on type-3 resistant starch particles (rSPs) derived from short chain glucan (SCG) was investigated. The L-AA were categorized based on their charge and polarity. The results reveal that positively charged L-AA, such as lysine and arginine, decreased the nucleation and growth rate of rSPs, while non-charged L-AA have negligible effects. Negatively charged L-AA, such as glutamic acid and aspartic acid, had a significant impact on the morphology and crystallinity of the rSPs, resulting in particle size of around 3 μm and crystallinity of around 35%. This implies that charged L-AA influence the arrangement of SCG double helices in the particles. Furthermore, the complexation of SCG with charged L-AA reduced the level of RS in rSPs, indicating that L-AA could be useful in modulating the physical properties and digestibility of rSPs.

Exploring the mechanism of high hydrostatic pressure on the chemical activity of starch based on its structure and properties changes

High hydrostatic pressure (HHP) could induce changes in the structure and properties of starch. Native corn starch was treated and octenyl succinic anhydride (OSA)-modified corn starch was prepared under different pressures (200, 350, 500 and 600 MPa) at 40℃ for 20 min. The mechanism of HHP on the chemical activity of starch was elucidated by analyzing the relationship between the changes of native starch structure and properties and the quality of OSA-modified starch. Results showed that HHP not only helped water and OSA to penetrate the starch granules but also made the structure of starch granules undergone three changes similar to mechanochemical effects. The starch granules treated by 200 MPa were in the stress stage, and the starch granules treated by 500 MPa were in the transition stage from aggregation to agglomeration. Proper pressure treatment could significantly improve chemical activity of starch and quality of OSA-modified starch.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

Starch Nanoparticles: Preparation, Properties and Applications

Starch as a natural polymer is abundant and widely used in various industries around the world. In general, the preparation methods for starch nanoparticles (SNPs) can be classified into 'top-down' and 'bottom-up' methods. SNPs can be produced in smaller sizes and used to improve the functional properties of starch. Thus, they are considered for the various opportunities to improve the quality of product development with starch. This literature study presents information and reviews regarding SNPs, their general preparation methods, characteristics of the resulting SNPs and their applications, especially in food systems, such as Pickering emulsion, bioplastic filler, antimicrobial agent, fat replacer and encapsulating agent. The aspects related to the properties of SNPs and information on the extent of their utilisation are reviewed in this study. The findings can be utilised and encouraged by other researchers to develop and expand the applications of SNPs.

Efficient Accumulation of Amylopectin and Its Molecular Mechanism in the Submerged Duckweed Mutant

Large-scale use of fossil fuels has brought about increasingly serious problems of environmental pollution, development and utilization of renewable energy is one of the effective solutions. Duckweed has the advantages of fast growth, high starch content and no occupation of arable land, so it is a promising starchy energy plant. A new submerged duckweed mutant (sub-1) with abundant starch accumulation was obtained, whose content of amylopectin accounts for 84.04% of the starch granules. Compared with the wild type (Lemna aequinoctialis), the branching degree of starch in sub-1 mutant was significantly increased by 19.6%. Chain length DP 6-12, DP 25-36 and DP > 36 of amylopectin significantly decreased, while chain length DP 13-24 significantly increased. Average chain length of wild-type and sub-1 mutant starches were greater than DP 22. Moreover, the crystal structure and physical properties of starch have changed markedly in sub-1 mutant. For example, the starch crystallinity of sub-1 mutant was only 8.94%, while that of wild-type was 22.3%. Compared with wild type, water solubility of starch was significantly reduced by 29.42%, whereas swelling power significantly increased by 97.07% in sub-1 mutant. In order to further analyze the molecular mechanism of efficient accumulation of amylopectin in sub-1 mutant, metabolome and transcriptome were performed. The results showed that glucose accumulated in sub-1 mutant, then degradation of starch to glucose mainly depends on α-amylase. At night, the down-regulated β-amylase gene resulted in the inhibition of starch degradation. The starch and sucrose metabolism pathways were significantly enriched. Up-regulated expression of SUS, AGPase2, AGPase3, PYG, GPI and GYS provide sufficient substrate for starch synthesis in sub-1 mutant. From the 0H to 16H light treatment, granule-bound starch synthase (GBSS1) gene was inhibited, on the contrary, the starch branching enzyme (SBE) gene was induced. Differential expression of GBSS1 and SBE may be an important reason for the decrease ratio of amylose/amylopectin in sub-1 mutant. Taken together, our results indicated that the sub-1 mutant can accumulate the amylopectin efficiently, potentially through altering the differential expression of AGPase, GBSS1, SBE, and BAM. This study also provides theoretical guidance for creating crop germplasm with high amylopectin by means of synthetic biology in the future.

Effect of heat-moisture treatment (HMT) on thermal stability of starch gel and the surface adhesiveness of vermicelli

The molecular structure has an important influence on the surface adhesion of starch gel. In the present study, the surface adhesiveness of vermicelli after cooking was reduced by heat-moisture treatment (HMT), and the mechanism underlying the increased thermal stability was explored by measuring the changes in short-range order, crystallinity, the thickness of the crystalline layer, and the length of the double helix in the dry starch gel. The surface adhesiveness decreased by 72.12 % when the moisture content was 26 %. HMT increased the crystallinity, and the thickness of the crystalline layer of the starch gel increased from 14.61 nm to 14.83-17.30 nm at 20-26 % moisture content. The molecular rearrangement and destruction of unstable short double helixes increased the proportion of long double helixes, resulting in an increased crystallinity and layer thickness.

Microstructures of Starch Granules with Different Amylose Contents and Allomorphs as Revealed by Scattering Techniques

In this study, as-is (ca. 12% moisture by mass) and hydrated (50% water by mass) granules of waxy potato (WP), waxy wheat (WW), waxy maize, normal maize, and high-amylose maize (HAM) starches were investigated by using small-angle neutron and X-ray scattering (SANS and SAXS), wide-angle X-ray scattering, and ultra-small-angle neutron scattering. The SANS and SAXS data were fitted using the two-phase stacking model of alternating crystalline and amorphous layers. The partial crystalline lamellar structures inside the growth rings of granules were analyzed based on the inter-lamellar distances, thicknesses of the crystalline lamellae and amorphous layers, thickness polydispersities, and water content in each type of layer. Despite having a longer average chain length of amylopectin, the WP and HAM starches, which had B-type allomorph, had a shorter inter-lamellar distance than the other three starches with A-type allomorph. The WP starch had the most uniform crystalline lamellar thickness. After hydration, the amorphous layers were expanded, resulting in an increase of inter-layer distance. The low-angle intensity upturn in SANS and SAXS was attributed to scattering from interfaces/surfaces of larger structures, such as growth rings and macroscopic granule surfaces. Data analysis methods based on model fitting and 1D correlation function were compared. The study emphasized─owing to inherent packing disorder inside granules─that a comprehensive analysis of different parameters was essential in correlating the microstructures with starch properties.

Analysis and detection using novel terahertz spectroscopy technique in dietary carbohydrate-related research: Principles and application advances

As one of the main functional substances, carbohydrates account for a large proportion of the human diet. Conventional analysis and detection methods of dietary carbohydrates and related products are destructive, time-consuming, and labor-intensive. In order to improve the efficiency of measurement and ensure food nutrition and consumer health, rapid and nondestructive quality evaluation techniques are needed. In recent years, terahertz (THz) spectroscopy, as a novel detection technology with dual characteristics of microwave and infrared, has shown great potential in dietary carbohydrate analysis. The current review aims to provide an up-to-date overview of research advances in using the THz spectroscopy technique in analysis and detection applications related to dietary carbohydrates. In the review, the principles of the THz spectroscopy technique are introduced. Advances in THz spectroscopy for quantitative and qualitative analysis and detection in dietary carbohydrate-related research studies from 2013 to 2022 are discussed, which include analysis of carbohydrate concentrations in liquid and powdery foods, detection of foreign body and chemical residues in carbohydrate food products, authentication of natural carbohydrate produce, monitoring of the fermentation process in carbohydrate food production and examination of crystallinity in carbohydrate polymers. In addition, applications in dietary carbohydrate-related detection research using other spectroscopic techniques are also briefed for comparison, and future development trends of THz spectroscopy in this field are finally highlighted.

Crystal-by-Crystal Assembly in Two Types of Periodically Banded Aggregates of Poly(p-Dioxanone)

The exterior and interior lamellar assemblies of poly(p-dioxanone) (PPDO) crystallized at 76 °C yield the most regular ones to interpret the 3D assembly mechanisms and potential for structural coloration iridescence, which are investigated using atomic-force microscopy (AFM), and scanning electron microscopy (SEM). PPDO displays two types of ring-banded spherulites within a range of Tc with dual-type birefringent spherulites (positive and negative-type) only within a narrow range of Tcs = 70−78 °C. At Tc > 80 °C, the inter-band spacing decreases from a maximum and the crystal assembly becomes irregularly corrupted and loses the capacity for light interference. Periodic grating assemblies are probed by in-depth 3D dissection into periodically banded crystal aggregates of poly(p-dioxanone) (PPDO) to disclose such layered gratings possessing iridescence features similar to nature’s structural coloration. This work amply demonstrates that grating assembly by orderly stacked crystal layers is feasible not only for accounting for the periodic birefringent ring bands with polarized light but also the distinct iridescence by interfering with white light.

High-amylose maize starch: Structure, properties, modifications and industrial applications

High-amylose maize refers to a special type of maize cultivar with a 50 %-90 % amylose content of the total starch. High-amylose maize starch (HAMS) is of interest because it possesses unique functionalities and provides many health benefits for humans. Therefore, many high-amylose maize varieties have been developed via mutation or transgenic breeding approaches. From the literature reviewed, the fine structure of HAMS is different from the waxy and normal corn starches, influencing its gelatinization, retrogradation, solubility, swelling power, freeze-thaw stability, transparency, pasting and rheological properties, and even in vitro digestion. HAMS has undergone physical, chemical, and enzymatical modifications to enhance its characteristics and thereby broaden its possible uses. HAMS has also been used for the benefit of increasing resistant starch levels in food products. This review summarizes the recent developments in our understanding of the extraction and chemical composition, structure, physicochemical properties, digestibility, modifications, and industrial applications of HAMS.

Starch fine molecular structures: The basis for designer rice with slower digestibility and desirable texture properties

Development of whole rice with low glycaemic index has been achieved, however, these rices are frequently associated with a poor texture property. Recent advances in terms of understanding the importance of starch fine molecular structures on the starch digestibility/texture of cooked whole rice have shed new insights on mechanisms of starch digestibility and texture from molecular levels. With an extensive discussion on the correlative and causal relationships among starch molecular structure, texture and starch digestibility of cooked whole rice, this review identified desirable starch fine molecular structures contributing to both slow starch digestibility and preferable textures. For instance, the selection of rice variety having more amylopectin intermediate chains while less amylopectin long chains might help develop cooked whole rice with both slower starch digestibility and softer texture. The information could help rice industry transform cooked whole rice into a healthier food product with slow starch digestibility and desirable texture.

Adhesive Interfaces toward a Zero-Waste Industry

This Feature Article evaluates ongoing efforts to adapt adhesives toward the goal of zero-waste living and suggests the most promising future directions. Adhesives are not always considered in zero-waste manufacturing because they represent only a small fraction of a product and offer no additional functionality. However, their presence restricts the reintegration of constituent parts into a circular economy, so a new generation of adhesives is required. Furthermore, their production often leads to harmful pollutants. Here, two main approaches toward addressing these problems are considered: first, the use of natural materials that replace petroleum-based polymers from which conventional adhesives are made and second, the production of dismantlable adhesives capable of debonding on demand with the application of an external stimulus. These approaches, either individually or combined, offer a new paradigm in zero-waste industrial production and consumer applications.