Counter-Intuitive Gas-Phase Reactivities of [V2 ]+ and [V2 O]+ towards CO2 Reduction: Insight from Electronic Structure Calculations

[V2 O]+ remains "invisible" in the thermal gas-phase reaction of bare [V2 ]+ with CO2 giving rise to [V2 O2 ]+ ; this is because the [V2 O]+ intermediate is being consumed more than 230 times faster than it is generated. However, the fleeting existence of [V2 O]+ and its involvement in the [V2 ]+ → [V2 O2 ]+ chemistry are demonstrated by a cross-over labeling experiment with a 1:1 mixture of C16 O2 /C18 O2 , generating the product ions [V2 16 O2 ]+ , [V2 16 O18 O]+ , and [V2 18 O2 ]+ in a 1:2:1 ratio. Density functional theory (DFT) calculations help to understand the remarkable and unexpected reactivity differences of [V2 ]+ versus [V2 O]+ towards CO2 .

Nonadiabatic Electronic Energy Transfer in the Chemical Oxygen-Iodine Laser: Powered by Derivative Coupling or Spin-Orbit Coupling?

Derivative couplings near a conical intersection and spin-orbit couplings between different spin states are known to facilitate nonadiabatic transitions in molecular systems. Here, we investigate a prototypical electronic energy transfer process, I(²P_3/2) + O₂(a¹Δ_g) → I(²P_1/2) + O₂(X³Σ_g^-), which is of great importance for the chemical oxygen-iodine laser. To understand the nonadiabatic dynamics, this multistate process is investigated in full dimensionality with quantum wave packets using diabatic potential energy surfaces coupled by both derivative and spin-orbit couplings, all determined from first principles. A near quantitative agreement with structural, energetic, and kinetic measurements is achieved. Detailed analyses suggest that the nonadiabatic dynamics is largely controlled by derivative coupling near conical intersections, which leads to a small effective barrier and hence a slightly positive temperature dependence of the rate coefficient. The new results should extend our understanding of energy transfer, provide a quantitative basis for numerical simulations of the chemical oxygen-iodine laser, and have important implications in other electronic energy transfer processes.

On the Crucial Role of Isolated Electronic States in the Thermal Reaction of ReC+ with Dihydrogen

Presented here is that isolated, long‐lived electronic states of ReC⁺ serve as the root cause for distinctly different reactivities of this diatomic ion in the thermal activation of dihydrogen. Detailed high‐level quantum chemical calculations support the experimental findings obtained in the highly diluted gas phase using FT‐ICR mass spectrometry. The origin for the existence of these long‐lived excited electronic states and the resulting implications for the varying mechanisms of dihydrogen splitting are addressed.

Spin Crossover in 3D Metal Centers Binding Halide-Containing Ligands: Magnetism, Structure and Computational Studies

The capability of a given substance to change its spin state by the action of a stimulus, such as a change in temperature, is by itself a very challenging property. Its interest is increased by the potential applications and the need to find sustainable functional materials. 3D transition metal complexes, mainly with octahedral geometry, display this property when coordinated to particular sets of ligands. The prediction of this behavior has been attempted by many authors. It is, however, made very difficult because spin crossover (SCO), as it is called, occurs most often in the solid state, where besides complexes, counter ions, and solvents are also present in many cases. Intermolecular interactions definitely play a major role in SCO. In this review, we decided to analyze SCO in mono- and binuclear transition metal complexes containing halogens as ligands or as substituents of the ligands. The aim was to try and find trends in the properties which might be correlated to halogen substitution patterns. Besides a revision of the properties, we analyzed structures and other information. We also tried to build a simple model to run Density Functional Theory (DFT) calculations and calculate several parameters hoping to find correlations between calculated indices and SCO data. Although there are many experimental studies and single-crystal X-ray diffraction structures, there are only few examples with the F, Cl, Br and series. When their intermolecular interactions were not very different, T1/2 (temperature with 50% high spin and 50% low spin states) usually increased with the calculated ligand field parameter (Δoct) within a given family. A way to predict SCO remains elusive.

Constructing Spin-Adiabatic States for the Modeling of Spin-Crossing Reactions. I. A Shared-Orbital Implementation

In the modeling of spin-crossing reactions, it has become popular to directly explore the spin-adiabatic surfaces. Specifically, through constructing spin-adiabatic states from a two-state Hamiltonian (with spin-orbit coupling matrix elements) at each geometry, one can readily employ advanced geometry optimization algorithms to acquire a "transition state" structure, where the spin crossing occurs. In this work, we report the implementation of a fully-variational spin-adiabatic approach based on Kohn-Sham density functional theory spin states (sharing the same set of molecular orbitals) and the Breit-Pauli one-electron spin-orbit operator. For three model spin-crossing reactions [predissociation of N₂O, singlet-triplet conversion in CH₂, and CO addition to Fe(CO)₄], the spin-crossing points were obtained. Our results also indicated the Breit-Pauli one-electron spin-orbit coupling can vary significantly along the reaction pathway on the spin-adiabatic energy surface. On the other hand, due to the restriction that low-spin and high-spin states share the same set of molecular orbitals, the acquired spin-adiabatic energy surface shows a cusp (i.e. a first-order discontinuity) at the crossing point, which prevents the use of standard geometry optimization algorithms to pinpoint the crossing point. An extension with this restriction removed is being developed to achieve the smoothness of spin-adiabatic surfaces.

Spin-Forbidden Reactivity of Transition Metal Oxo Species: Exploring the Potential Energy Surfaces

Spin-forbidden reactions are frequently encountered when transition metal oxo species are involved, particularly in oxygen transfer reactivity. The computational study of such reactions is challenging, because reactants and products are located on different spin potential energy surfaces (PESs). One possible approach to describe these reactions is the so-called minimum energy crossing point (MECP) between the diabatic reactants and products PESs. Alternatively, inclusion of spin-orbit coupling (SOC) effects allows to locate a saddle point on a single adiabatic PES (TS SOC). The TS SOC approach is rarely applied because of its high computational cost. Recently evidence for a TS SOC impact on significantly lowering the activation barrier in dioxygen addition to a carbene-gold(I)-hydride complex reaction (Chem. Sci. 2016, 7, 7034-7039) or even on predicting a qualitatively different reaction mechanism in mercury methylation by cobalt corrinoid (Angew. Chem. Int. Ed. 2016, 55, 11503-11506) has been put forward. Using MECP and TS SOC approaches a systematic analysis is provided here of three prototypical transition metal oxo spin-forbidden processes to investigate their implications on reactivity. Cycloaddition of ethylene to chromyl chloride (CrO₂ Cl₂ +C₂ H₄ ), iron oxide cation insertion into the hydrogen molecule (FeO⁺ +H₂ ) and H-abstraction from toluene by a Mn^V -oxo-porphyrin cation (MnOP(H₂ O)⁺ +C₆ H₅ CH₃ ) are case studies. For all these processes the MECP and TS SOC results are compared, which show that the spin-forbidden reactivity of transition metal oxo species can be safely described by a MECP approach, at least for the first-row transition metals investigated here, where the spin-orbit coupling is relatively weak. However, for the Mn-oxo reactivity, the MECP and TS SOC have been found to be crucial for a correct description of the reaction mechanism. In particular, the TS SOC approach allows to straightforwardly explore detailed features of the adiabatic potential energy surface which in principle could affect the overall reaction rate in cases where the involved diabatic PESs are tricky.

Revealing the Iron-Catalyzed β-Methyl Scission of tert-Butoxyl Radicals via the Mechanistic Studies of Carboazidation of Alkenes

We describe here a mechanistic study of the iron-catalyzed carboazidation of alkenes involving an intriguing metal-assisted β-methyl scission process. Although t-BuO radical has frequently been observed in experiments, the β-methyl scission from a t-BuO radical into a methyl radical and acetone is still broadly believed to be thermodynamically spontaneous and difficult to control. An iron-catalyzed β-methyl scission of t-BuO is investigated in this work. Compared to a free t-BuO radical, the coordination at the iron atom reduces the activation energy for the scission from 9.3 to 3.9 ~ 5.2 kcal/mol. The low activation energy makes the iron-catalyzed β-methyl scission of t-BuO radicals almost an incomparably facile process and explains the selective formation of methyl radicals at low temperature in the presence of some iron catalysts. In addition, a radical relay process and an outer-sphere radical azidation process in the iron-catalyzed carboazidation of alkenes are suggested by density functional theory (DFT) calculations.

Reduced-Dimensionality Quantum Dynamics Study of the 3Fe(CO)4 + H2 1FeH2(CO)4 Spin-inversion Reaction

Many chemical reactions of transition metal compounds involve a change in spin state via spin inversion, which is induced by relativistic spin-orbit coupling. In this work, we theoretically study the efficiency of a typical spin-inversion reaction, ³Fe(CO)₄ + H₂ → ¹FeH₂(CO)₄. Structural and vibrational information on the spin-inversion point, obtained through the spin-coupled Hamiltonian approach, is used to construct three degree-of-freedom potential energy surfaces and to obtain singlet-triplet spin-orbit couplings. Using the developed spin-diabatic potential energy surfaces in reduced dimensions, we perform quantum nonadiabatic transition state wave packet calculations to obtain the cumulative reaction probability. The calculated cumulative reaction probability is found to be significantly larger than that estimated from the one-dimensional surface-hopping probability. This indicates the importance of both multidimensional and nuclear quantum effects in spin inversion for polyatomic chemical reaction systems.

Understanding the Role of Solvents and Spin-Orbit Coupling in an Oxygen-Assisted SN 2-Type Oxidative Transmetalation Reaction

The aerial oxidation of Pd^II to Pd^IV has emerged as an integral component of sustainable catalytic C-H functionalization processes. However, a proper understanding of the factors that control the viability of this oxidative process remains elusive. An investigation of the intricate mechanism of the transmetalation reaction of the aerial oxidative transformation of [(Me₃ tacn)Pd^II Me₂ ] (Me₃ tacn=N,N',N''-trimethyl-1,4,7-triazacyclononane) to [(Me₃ tacn)Pd^IV Me₃ ]⁺ has been conducted by using DFT, along with multireference methods, such as second-order n-electron valence-state perturbation theory (NEVPT2) with complete active space self-consistent field theory (CASSCF). The present endeavor predicts that the thermodynamics and kinetics of the oxygen activation step are primarily dictated by the polarity of the solvents, which determine the amount of charge transfer to the oxygen molecule from the Pd^II center. Additionally, it is observed that the presence of a protic solvent has a significant effect on the spin-orbit coupling term at the minimum energy crossing point of the triplet and singlet surfaces. Moreover, it is shown that the intermetal ligand-transfer phenomenon is an important instance of an oxygen-assisted S_N 2 reaction.

Understanding the Reactivity of Mn-Oxo Porphyrins for Substrate Hydroxylation: Theoretical Predictions and Experimental Evidence Reconciled

The Mn-oxo porphyrin (MnOP) mechanism for substrate hydroxylation is computationally studied with the aim to better understand reactivity in these systems. Theoretical studies suggest Mn(V)OP species to be very reactive intermediates with thermally accessible reaction barriers represented by low-spin/high-spin-crossover occurring in the Mn(V)OP oxidant, and kinetics for selected Mn(V)OP species indeed find high reactivity. On the other hand, MnOP complexes lead to modest yields in hydroxylation reactions of several different substrates, implying low rate constants and high reaction barriers. The resolution of this inconsistency is very important to understand the reactivity of Mn-oxo porphyrins and to improve the catalytic conditions. In this work we use the toluene hydroxylation by the Mn(V)OP(H₂O)⁺ complex as a case study to gain deep insight into the reaction mechanism. Minimum energy crossing point (MECP) results on the H-abstraction process from toluene indicate a first crossover from a singlet to a triplet spin state of the Mn(V)OP(H₂O)⁺ species with a thermally accessible barrier, followed by a very facile H-abstraction by the triplet complex. Issues concerning (i) the validation of the level of the density functional theory employed (BP86) to describe the singlet-triplet energy gap in the Mn(V)OP(H₂O)⁺ system versus highly accurate DMRG-CASPT2/CC calculations, and (ii) the influence of the axial ligand (X = none, Cl^-, CH₃CN, OH^-, and O^2-) on MnOP reactivity, which models the different experimental conditions, are addressed. The ligand trans influence mainly controls the reactivity through the singlet-triplet energy gap modulation, with the porphyrin ruffling distortion also finely tuning it. Finally, a stepwise model for the H-abstraction process is proposed which allows a direct comparison between the calculated and experimentally measured Gibbs free activation energy barriers ( Zhang et al. J. Am. Chem. Soc. 2005 , 127 , 6573 - 6582 ). The low yields in catalysis are shown not to be due to low reactivity of Mn(V).

Bridging the Homogeneous-Heterogeneous Divide: Modeling Spin for Reactivity in Single Atom Catalysis

Single atom catalysts (SACs) are emergent catalytic materials that have the promise of merging the scalability of heterogeneous catalysts with the high activity and atom economy of homogeneous catalysts. Computational, first-principles modeling can provide essential insight into SAC mechanism and active site configuration, where the sub-nm-scale environment can challenge even the highest-resolution experimental spectroscopic techniques. Nevertheless, the very properties that make SACs attractive in catalysis, such as localized d electrons of the isolated transition metal center, make them challenging to study with conventional computational modeling using density functional theory (DFT). For example, Fe/N-doped graphitic SACs have exhibited spin-state dependent reactivity that remains poorly understood. However, spin-state ordering in DFT is very sensitive to the nature of the functional approximation chosen. In this work, we develop accurate benchmarks from correlated wavefunction theory (WFT) for relevant octahedral complexes. We use those benchmarks to evaluate optimal DFT functional choice for predicting spin state ordering in small octahedral complexes as well as models of pyridinic and pyrrolic nitrogen environments expected in larger SACs. Using these guidelines, we determine Fe/N-doped graphene SAC model properties and reactivity as well as their sensitivities to DFT functional choice. Finally, we conclude with broad recommendations for computational modeling of open-shell transition metal single-atom catalysts.

Spin Interconversion of Heme-Peroxo-Copper Complexes Facilitated by Intramolecular Hydrogen-Bonding Interactions

Synthetic peroxo-bridged high-spin (HS) heme-(μ-η2:η1-O22-)-Cu(L) complexes incorporating (as part of the copper ligand) intramolecular hydrogen-bond (H-bond) capabilities and/or steric effects are herein demonstrated to affect the complex's electronic and geometric structure, notably impacting the spin state. An H-bonding interaction with the peroxo core favors a low-spin (LS) heme-(μ-η1:η1-O22-)-Cu(L) structure, resulting in a reversible temperature-dependent interconversion of spin state (5 coordinate HS to 6 coordinate LS). The LS state dominates at low temperatures, even in the absence of a strong trans-axial heme ligand. Lewis base addition inhibits the H-bond facilitated spin interconversion by competition for the H-bond donor, illustrating the precise H-bonding interaction required to induce spin-crossover (SCO). Resonance Raman spectroscopy (rR) shows that the H-bonding pendant interacts with the bridging peroxide ligand to stabilize the LS but not the HS state. The H-bond (to the Cu-bound O atom) acts to weaken the O-O bond and strengthen the Fe-O bond, exhibiting ν(M-O) and ν(O-O) values comparable to analogous known LS complexes with a strong donating trans-axial ligand, 1,5-dicyclohexylimidazole, (DCHIm)heme-(μ-η1:η1-O22-)-Cu(L). Variable-temperature (-90 to -130 °C) UV-vis and 2H NMR spectroscopies confirm the SCO process and implicate the involvement of solvent binding. Examining a case of solvent binding without SCO, thermodynamic parameters were obtained from a van't Hoff analysis, accounting for its contribution in SCO. Taken together, these data provide evidence for the H-bond group facilitating a core geometry change and allowing solvent to bind, stabilizing a LS state. The rR data, complemented by DFT analysis, reveal a stronger H-bonding interaction with the peroxo core in the LS compared to the HS complexes, which enthalpically favors the LS state. These insights enhance our fundamental understanding of secondary coordination sphere influences in metalloenzymes.

Benchmarking quantum chemistry methods for spin-state energetics of iron complexes against quantitative experimental data

The accuracy of relative spin-state energetics predicted by selected quantum chemistry methods: coupled cluster theory at the CCSD(T) level, multiconfigurational perturbation theory (CASPT2, NEVPT2), multireference configuration interaction at the MRCISD+Q level, and a number of DFT methods, is quantitatively evaluated by comparison with the experimental data of four octahedral iron complexes. The available experimental data, either spin-forbidden transition energies or spin crossover enthalpies, are corrected for relevant environmental effects in order to derive the quantitative benchmark set of iron spin-state energetics. Comparison of theory predictions with the resulting reference data: (1) validates the high accuracy of the CCSD(T) method, particularly when based on Kohn-Sham orbitals, giving the maximum error below 2 kcal mol-1 and the mean absolute error (MAE) below 1 kcal mol-1; (2) corroborates the tendency of CASPT2 to systematically overstabilize higher-spin states by up to 5.5 kcal mol-1; (3) confirms that the latter problem is partly remedied by the recently proposed CASPT2/CC approach [Phung et al., J. Chem. Theory Comput., 2018, 14, 2446-2455]; (4) demonstrates that NEVPT2 performs worse than CASPT2, by giving errors up to 7 kcal mol-1; (5) shows that the accuracy of MRCISD+Q spin-state energetics strongly depends on the size-consistency correction: the Davidson-Silver and Pople corrections perform best (MAE < 3 kcal mol-1), whereas the standard Davidson correction is not recommended (MAE of 7 kcal mol-1). Only a few DFT methods (including the best performing ones identified in this study: B2PLYP-D3 and OPBE) are able to provide a balanced description of the spin-state energetics for all four studied iron complexes simultaneously, corroborating the non-universality problem of approximate density functionals.

Thermal Activation of CH4 and H2 as Mediated by the Ruthenium Oxide Cluster Ions [RuOx ]+ (x=1-3): On the Influence of Oxidation States

Thermal gas-phase reactions of the ruthenium-oxide clusters [RuO_x ]⁺ (x=1-3) with methane and dihydrogen have been explored by using FT-ICR mass spectrometry complemented by high-level quantum chemical calculations. For methane activation, as compared to the previously studied [RuO]⁺ /CH₄ couple, the higher oxidized Ru systems give rise to completely different product distributions. [RuO₂ ]⁺ brings about the generations of [Ru,O,C,H₂ ]⁺ /H₂ O, [Ru,O,C]⁺ /H₂ /H₂ O, and [Ru,O,H₂ ]⁺ /CH₂ O, whereas [RuO₃ ]⁺ exhibits a higher selectivity and efficiency in producing formaldehyde and syngas (CO+H₂ ). Regarding the reactions with H₂ , as compared to CH₄ , both [RuO]⁺ and [RuO₂ ]⁺ react similarly inefficiently with oxygen-atom transfer being the main reaction channel; in contrast, [RuO₃ ]⁺ is inert toward dihydrogen. Theoretical analysis reveals that the reduction of the metal center drives the overall oxidation of methane, whereas the back-bonding orbital interactions between the cluster ions and dihydrogen control the H-H bond activation. Furthermore, the reactivity patterns of [RuO_x ]⁺ (x=1-3) with CH₄ and H₂ have been compared with the previously reported results of Group 8 analogues [OsO_x ]⁺ /CH₄ /H₂ (x=1-3) and the [FeO]⁺ /H₂ system. The electronic origins for their distinctly different reaction behaviors have been addressed.

A Missing Piece of the Mechanism in Metal-Catalyzed Hydrogenation: Co(-I)/Co(0)/Co(+I) Catalytic Cycle for Co(-I)-Catalyzed Hydrogenation

Hydrogenation catalyzed by unusually low-valent Co(-I) and Fe(-I) catalysts were recently reported. In contrast to the classical M(I)/M(III) (M = Rh or Ir) or Ir(III)/Ir(V) catalytic cycles in the singlet state (adiabatic reactions) for Rh- or Ir-catalyzed hydrogenation, our systematic DFT study elucidates a new Co(-I)/Co(0)/Co(+I) catalytic cycle involving both singlet and triplet states (nonadiabatic reaction). Also, the more electron-rich cobalt center of the Co(-I) catalyst was found to contribute higher reactivity for alkene hydrogenation.

Room Temperature Iron-Catalyzed Transfer Hydrogenation and Regioselective Deuteration of Carbon-Carbon Double Bonds

An iron catalyst has been developed for the transfer hydrogenation of carbon-carbon multiple bonds. Using a well-defined β-diketiminate iron(II) precatalyst, a sacrificial amine and a borane, even simple, unactivated alkenes such as 1-hexene undergo hydrogenation within 1 h at room temperature. Tuning the reagent stoichiometry allows for semi- and complete hydrogenation of terminal alkynes. It is also possible to hydrogenate aminoalkenes and aminoalkynes without poisoning the catalyst through competitive amine ligation. Furthermore, by exploiting the separate protic and hydridic nature of the reagents, it is possible to regioselectively prepare monoisotopically labeled products. DFT calculations define a mechanism for the transfer hydrogenation of propene with ⁿBuNH₂ and HBpin that involves the initial formation of an iron(II)-hydride active species, 1,2-insertion of propene, and rate-limiting protonolysis of the resultant alkyl by the amine N-H bond. This mechanism is fully consistent with the selective deuteration studies, although the calculations also highlight alkene hydroboration and amine-borane dehydrocoupling as competitive processes. This was resolved by reassessing the nature of the active transfer hydrogenation agent: experimentally, a gel is observed in catalysis, and calculations suggest this can be formulated as an oligomeric species comprising H-bonded amine-borane adducts. Gel formation serves to reduce the effective concentrations of free HBpin and ⁿBuNH₂ and so disfavors both hydroboration and dehydrocoupling while allowing alkene migratory insertion (and hence transfer hydrogenation) to dominate.

Intrinsic Reactivity of Diatomic 3d Transition-Metal Carbides in the Thermal Activation of Methane: Striking Electronic Structure Effects

Mechanistic aspects of the C-H bond activation of methane by metal-carbide cations MC⁺ of the 3d transition-metals Sc-Zn were elucidated by NEVPT2//CASSCF quantum-chemical calculations and verified experimentally for M = Ti, V, Fe, and Cu by using Fourier transform ion-cyclotron resonance mass spectrometry. While MC⁺ species with M = Sc, Ti, V, Cr, Cu, and Zn activate CH₄ at ambient temperature, this is prevented with carbide cations of M = Mn, Fe, and Co by high apparent barriers; NiC⁺ has a small apparent barrier. Hydrogen-atom transfers from methane to metal-carbide cations were found to proceed via a proton-coupled electron transfer mechanism for M = Sc-Co; wherein the doubly occupied π_xz/yz-orbitals between metal and carbon at the carbon site serve as electron donors and the corresponding metal-centered vacant π*_xz/yz-orbitals as electron acceptors. Classical hydrogen-atom transfer transpires only in the case of NiC⁺, while ZnC⁺ follows a mechanistic scenario, in which a formally hydridic hydrogen is transferred. CuC⁺ reacts by a synchronous activation of two C-H bonds. While spin density is often so crucial for the reactions of numerous MO⁺/CH₄ couples, it is much less important for the C-H bond activation by carbide cations of the 3d transition-metals, in which one notes large changes in bond dissociation energies, spin states, number of d-electrons, and charge distributions. All these factors jointly affect both the reactivity of the metal carbides and their mechanisms of C-H bond activation.

Selective Nitrogen-Atom Transfer Driven by a Highly Efficient Intersystem Crossing in the [CeON]+ /CH4 System

The thermal gas-phase reactions of [CeON]⁺ with methane have been explored by FT-ICR mass spectrometry and high-level quantum-chemical calculations. Nitrogen-atom transfer from the cluster ion to methane was observed as the only reaction channel. Based on computational work, the neutral molecule formed corresponds to either CH₂ NH₂ or CH₃ NH. In addition to a rather weak OCe⁺ -N bond, this reaction benefits from a highly efficient intersystem crossing. Mechanistic aspects and the associated electronic origins are discussed, and a detailed comparison of [CeON]⁺ , [CeO]⁺ , [CeN]⁺ , [CeO₂ ]⁺ , and atomic N in their reactions with CH₄ is given.

Selective C-O Coupling Hidden in the Thermal Reaction of [Al2 CuO5 ]+ with Methane

The thermal gas-phase reaction of [Al₂ CuO₅ ]⁺ with methane has been explored by using FT-ICR mass spectrometry complemented by high-level quantum chemical calculations. The generation of atomic [Cu]⁺ from the [Al₂ CuO₅ ]⁺ /CH₄ couple corresponds to the only reaction channel. Labeling experiments and computational studies strongly suggest that methane activation is indeed involved in the production of [Cu]⁺ , and generation of CH₂ O prevails. Mechanistic aspects and the associated doping effects are discussed.

Theoretical Investigations on Mechanisms and Pathways of C₂H₅O₂ with BrO Reaction in the Atmosphere

In this work, feasible mechanisms and pathways of the C₂H₅O₂ + BrO reaction in the atmosphere were investigated using quantum chemistry methods, i.e., QCISD(T)/6-311++G(2df,2p)//B3LYP/6-311++G(2df,2p) levels of theory. Our result indicates that the title reaction occurs on both the singlet and triplet potential energy surfaces (PESs). Kinetically, singlet C₂H₅O₃Br and C₂H₅O₂BrO were dominant products under the atmospheric conditions below 300 K. CH₃CHO₂ + HOBr, CH₃CHO + HOBrO, and CH₃CHO + HBrO₂ are feasible to a certain extent thermodynamically. Because of high energy barriers, all products formed on the triplet PES are negligible. Moreover, time-dependent density functional theory (TDDFT) calculation implies that C₂H₅O₃Br and C₂H₅O₂BrO will photolyze under the sunlight.