Emerging pollutants in water environment: Occurrence, monitoring, fate, and risk assessment

Contaminants of emerging concern (CECs) in aquaculture effluent: Insight into breeding and rearing activities, alarming impacts, regulations, performance of wastewater treatment unit and future approaches

The contamination of aquaculture products and effluents by contaminants of emerging concern (CECs) from the direct chemical use in aquaculture activities or surrounding industries is currently an issue of increasing concern as these CECs exert acute and chronic effects on living organisms. CECs have been detected in aquaculture water, sediment, and culture species, and antibiotics, antifoulants, and disinfectants are the commonly detected groups. Through accumulation, CECs can reside in the tissue of aquaculture products and eventually consumed by humans. Currently, effluents containing CECs are discharged to the surrounding environment while producing sediments that eventually contaminate rivers as receiving bodies. The rearing (grow-out) stages of aquaculture activities are issues regarding CECs-contamination in aquaculture covering water, sediment, and aquaculture products. Proper regulations should be imposed on all aquaculturists to control chemical usage and ensure compliance to guidelines for appropriate effluent treatment. Several techniques for treating aquaculture effluents contaminated by CECs have been explored, including adsorption, wetland construction, photocatalysis, filtration, sludge activation, and sedimentation. The challenges imposed by CECs on aquaculture activities are discussed for the purpose of obtaining insights into current issues and providing future approaches for resolving associated problems. Stakeholders, such as researchers focusing on environment and aquaculture, are expected to benefit from the presented results in this article. In addition, the results may be useful in establishing aquaculture-related CECs regulations, assessing toxicity to living biota, and preventing pollution.

Detection and Removal of Priority Substances and Emerging Pollutants from Stormwater: Case Study of the Kołobrzeska Collector, Gdańsk, Poland

Progressive urban development affects environmental balance and disrupts the hydrologic cycle, in which rainfall plays a significant role. Since rainwater is considered a valuable resource of the environment, many technical solutions are implemented that enable effective rainwater management. On the other hand, stormwater runoff from urban areas contains numerous (also toxic) substances, and therefore should be properly treated. In this study, a multistage constructed wetland (MCW) pilot installation was used to remove selected groups of priority substances and emerging pollutants from rainwater discharged from the urbanized catchment of the Kołobrzeska stormwater collector in Gdańsk, Poland. The obtained results show that rainwater runoff was characterized by a variable concentrations of heavy metals (Zn, Cd, Cu, Ni, Pb, Hg), polycyclic aromatic hydrocarbons (benzo(a)pyrene, benzo(b)fluoranthene, phenanthrene, fluoranthene and pyrene) and microplastics. Depending on the hydraulic load of the bed, the reduction efficiency for heavy metals ranged from 26.19 to 100%, and for microplastics from 77.16 to 100%, whereas for polycyclic aromatic hydrocarbons it was consistently high, and equaled 100%.

Unravelling the role of membrane pore size in polar organic chemical integrative samplers (POCIS) to broaden the polarity range of sampled analytes

Polar organic chemical integrative samplers (POCIS) are widely used in their standard configuration for sampling contaminants in water bodies. A wider polyethersulfone (PES) membrane pore size was employed in POCIS exposed in a static calibration experiment to investigate the uptake of 21 emerging contaminants ranging from hydrophilic (perfluoroalkyl compounds, xanthines, an artificial sweetener) to more hydrophobic compounds (pharmaceuticals, oestrogens, UV filters). Compared to standard POCIS with 0.1-µm pore size PES membranes, the POCIS with 5-µm pore size PES membranes did not increase sampling rates for compounds of relatively low and mid-hydrophobicity. However, the uptake of more hydrophobic and anionic compounds, which either poorly diffuse through or are retained within the standard 0.1-µm PES membrane, showed a marked increase. This led to the first ever recorded sampling rates for triclosan (0.249 L day^-1) and two UV filters (0.075-0.123 L day^-1). Based on these results, more attention should be placed on the choice of the appropriate membrane for each POCIS application. The most suitable configuration depends on the studied compound physico-chemical characteristics-such as the polarity and the compound membrane-to-sorbent partitioning coefficient-but also on the site conditions (deployment time, fouling, flow variations, et.).

Multifunctional Membranes-A Versatile Approach for Emerging Pollutants Removal

This paper presents a comprehensive literature review surveying the most important polymer materials used for electrospinning processes and applied as membranes for the removal of emerging pollutants. Two types of processes integrate these membrane types: separation processes, where electrospun polymers act as a support for thin film composites (TFC), and adsorption as single or coupled processes (photo-catalysis, advanced oxidation, electrochemical), where a functionalization step is essential for the electrospun polymer to improve its properties. Emerging pollutants (EPs) released in the environment can be efficiently removed from water systems using electrospun membranes. The relevant results regarding removal efficiency, adsorption capacity, and the size and porosity of the membranes and fibers used for different EPs are described in detail.

Comparative Study on UV-AOPs for Efficient Continuous Flow Removal of 4-tert-Butylphenol

In the present study, UV-light-driven advanced oxidation processes (AOPs) have been employed for the degradation of 4-tert-Butylphenol (4-t-BP) in water under continuous flow conditions. The effects of varying space time (10, 20, 40, 60 and 120 min) and oxidant dosage (88.3 mg/L, 176.6 mg/L and 264 mg/L) were examined. 4-t-BP degradation efficiency in the UV-induced AOPs followed the order of UV/H2O2 (264.9 mg/L) ≈ UV/Fe2+/H2O2 > UV/Fe3+/H2O2 > UV/H2O2 (176.6 mg/L) > UV/H2O2 (88.3 mg/L) > UV/Fe-TiO2 > UV/TiO2 > UV, while UV/Fe3+/H2O2 was the most efficient process in terms of Total Organic Carbon (TOC) removal (at the space time of 60 min) among those tested. The combination of UV with 88.3 mg/L H2O2 enhanced pollutant removal from 51.29% to 93.34% after 10 min of irradiation. The presence of H2O2 contributed to the highest 4-t-BP and TOC removal values. Interestingly, the increase in space time from 20 to 60 min resulted in surpassing of the activity of the Fe-TiO2 over commercial TiO2, although it had an almost negligible positive impact on the performance of the UV/H2O2 system as well as H2O2 concentration. The results obtained showed that more than 80% of 4-t-BP could be successfully degraded by both heterogeneous and homogeneous AOPs after 60 min.

Effects of emerging pollutants on the occurrence and transfer of antibiotic resistance genes: A review

The emergence and spread of antibiotic resistance genes (ARGs) have become major concerns for both public health and environmental ecosystems. Emerging pollutants (EPs) that accumulate in environmental compartments also pose a potential risk for the enrichment of ARGs in indigenous microorganisms. This paper presents a comprehensive review of the effects and intrinsic mechanisms of EPs, including microplastics, engineered nanomaterials, disinfection byproducts, pharmaceuticals, and personal care products, on the occurrence and dissemination of ARGs. State-of-the-art methods for identifying culture-independent ARG-host interactions and monitoring horizontal gene transfer (HGT) processes in real-time are first reviewed. The contributions of EPs to the abundance and diversity of ARGs are then summarized. Finally, we discussed the underlying mechanisms related to the regulation of HGT, increased mutagenesis, and the evolution of microbial communities. Further details of three HGT (i.e., conjugation, transformation, and transduction) frequency patterns in response to various EPs are also examined. This review contemplates and reassesses the risks of ARG evolution posed by the manufacture and application of EPs.

Removal of Ibuprofen at Low Concentration Using a Newly Formulated Emulsion Liquid Membrane

Ibuprofen (IBP) is a pharmaceutical product that is widely prescribed as an over-the-counter painkiller. It has been classified as a contaminant of emerging concern (CEC) that has received global attention in the search for a better wastewater separation technology. The emulsion liquid membrane (ELM) is one of the potential solutions for IBP removal from wastewater owing to its advantages, such as the ability to remove a highly soluble solute, energy efficient and tuneable formulation. To develop this ELM, a series of parameters such as stirring speed, emulsification time, organic to internal phase volume ratio (O/I), internal phase concentration, carrier concentration and surfactant concentration were studied. The extraction was carried out for 15 min stirring time and the concentration of IBP in the feed phase was determined using a UV-Vis spectrophotometer. The optimum formulation for the ELM was found at 300 rpm stirring speed, 20 min emulsification time, 3:1 of O/I, 0.1 M ammonia, NH₃ (stripping agent), 6 wt% trioctylamine, TOA (carrier) and 2 wt% sorbitan monooleate, Span 80 (non-ionic surfactant). IBP removal of 89% was achieved at the optimum parameters of ELM. The current research demonstrated that a newly formulated ELM has great potential in removing a low concentration IBP from wastewater.

Various Natural and Anthropogenic Factors Responsible for Water Quality Degradation: A Review

Recognition of sustainability issues around water resource consumption is gaining traction under global warming and land utilization complexities. These concerns increase the challenge of gaining an appropriate comprehension of the anthropogenic activities and natural processes, as well as how they influence the quality of surface water and groundwater systems. The characteristics of water resources cause difficulties in the comprehensive assessment regarding the source types, pathways, and pollutants behaviors. As the behavior and prediction of widely known contaminants in the water resources remain challenging, some new issues have developed regarding heavy metal pollutants. The main aim of this review is to focus on certain essential pollutants’ discharge from anthropogenic activities categorized based on land-use sectors such as industrial applications (solid/liquid wastes, chemical compounds, mining activities, spills, and leaks), urban development (municipal wastes, land use practices, and others), and agricultural practices (pesticides and fertilizers). Further, important pollutants released from natural processes classified based on climate change, natural disasters, geological factors, soil/matrix, and hyporheic exchange in the aquatic environment, are also discussed. Moreover, this study addresses the major inorganic substances (nitrogen, fluoride, and heavy metals concentrations). This study also emphasizes the necessity of transdisciplinary research and cross-border communication to achieve sustainable water quality using sound science, adaptable legislation, and management systems.

Occurrence of Pharmaceuticals and Personal Care Products in the Water Environment of Poland: A Review

The issue of pharmaceuticals and personal care products (PPCPs) in the water environment has gained increasing interest worldwide. To determine the nature and extent of this problem for Poland, this paper presents a review of research on the presence of PPCPs in Poland, looking at results for different water samples, including wastewater (before and after treatment), landfill leachate, surface water (standing water bodies and rivers), seawater, groundwater and drinking water. The review is based on over 50 scientific articles and dissertations referring to studies of PPCPs. It also briefly outlines possible sources and the fate of PPCPs in the aquatic environment. The review of Polish research has revealed that studies have previously covered at least 39 PPCP groups (270 compounds in total). These studies focused mainly on wastewater and rivers, and only a few concerned landfill leachate and seawater. They most often reported on nonsteroidal anti-inflammatory drugs and antibiotics. The highest concentrations of the analysed PPCPs were found mainly in raw wastewater (e.g., naproxen, up to 551,960 ng/L), but they were also occasionally found in surface water (e.g., azithromycin, erythromycin, irbesartan and metoprolol) and in groundwater (e.g., N,N-diethyl-meta-toluamide, known as DEET, up to 17,280 ng/L). Extremely high concentrations of bisphenol A (up to 2,202,000 ng/L) and diclofenac (up to 108,340 ng/L) were found in landfill leachate. Although numerous substances have been detected, PPCPs are still not monitored regularly, which makes it difficult to obtain a clear understanding of their incidence in the water environment.

In Danger One of the Largest Aquifers in the World, the Great Mayan Aquifer, Based on Monitoring the Cenotes of the Yucatan Peninsula

The aquifer flowing beneath the Yucatan Peninsula, México, is one of the largest in the world and is in direct contact with the surface through "cenotes" (sinkholes) that have been documented to be contaminated with various classes of pollutants. The objective of this study was to evaluate the environmental status of the Great Mayan Aquifer through a review of data published on pollution of the cenotes. Approximately 1000 known georeferenced cenotes on the Yucatan Peninsula were geographically located. A map was generated using the geographic information system software. High-resolution satellite images were processed to complement the "QuickMap Services" and the formatting service of the Environmental Systems Research Institute. From the literature, 173 cenotes were identified as being sampled for various pollutants, and of these, one or more classes of pollutants were detected in 160 (i.e., greater than 92%) of the cenotes. Pollutants reported to be present included bacteria and viruses of human origin, fecal sterols, polycyclic aromatic hydrocarbons (PAHs), pesticides, pharmaceuticals, illicit drugs and personal care products. From the review of the literature, only 13 cenotes were reported to be free of the target pollutants. From this study, it can be concluded that the aquifer system with the Yucatan Peninsula is vulnerable to contamination from pollutants originating from wastewater, as well as surface runoff and infiltration from urban and agricultural lands.

Current Applications of Magnetic Nanomaterials for Extraction of Mycotoxins, Pesticides, and Pharmaceuticals in Food Commodities

Environmental pollutants, such as mycotoxins, pesticides, and pharmaceuticals, are a group of contaminates that occur naturally, while others are produced from anthropogenic sources. With increased research on the adverse ecological and human health effects of these pollutants, there is an increasing need to regularly monitor their levels in food and the environment in order to ensure food safety and public health. The application of magnetic nanomaterials in the analyses of these pollutants could be promising and offers numerous advantages relative to conventional techniques. Due to their ability for the selective adsorption, and ease of separation as a result of magnetic susceptibility, surface modification, stability, cost-effectiveness, availability, and biodegradability, these unique magnetic nanomaterials exhibit great achievement in the improvement of the extraction of different analytes in food. On the other hand, conventional methods involve longer extraction procedures and utilize large quantities of environmentally unfriendly organic solvents. This review centers its attention on current applications of magnetic nanomaterials and their modifications in the extraction of pollutants in food commodities.

UV filters and UV stabilisers adsorbed in microplastic debris from beach sand

Microplastics (MPs) in oceans adsorb different types of pollutants, which can negatively impact the food chain. The extensive use of personal care products (PCPs) has led to their ubiquitous environmental presence, and their partition between plastic matrices and surroundings is determined by their physico-chemical characteristics and environmental conditions. This work develops and applies a methodology to determine 12 UV filters (UVFs) and UV stabilisers (UVSs) in MPs collected in beach sand. The analyses were carried out by ultrasound-assisted extraction and ultrahigh-performance liquid chromatography with tandem mass spectrometry detection. The validated procedure was applied to MPs samples taken in sand samples from 13 beaches on the Canary Islands (Spain). The results showed the presence of 10 UV filters and UV stabilisers at concentrations between 1 and 4031 ng·g^-1, where octocrylene was the most frequently found. The target analytes were present in all the sampling beaches.

Predicting the Adsorption of Amoxicillin and Ibuprofen on Chitosan and Graphene Oxide Materials: A Density Functional Theory Study

The occurrence, persistence, and accumulation of antibiotics and non-steroidal anti-inflammatory drugs (NSAIDs) represent a new environmental problem due to their harmful effects on human and aquatic life. A suitable absorbent for a particular type of pollutant does not necessarily absorb other types of compounds, so knowing the compatibility between a particular pollutant and a potential absorbent before experimentation seems to be fundamental. In this work, the molecular interactions between some pharmaceuticals (amoxicillin, ibuprofen, and tetracycline derivatives) with two potential absorbers, chitosan and graphene oxide models (pyrene, GO-1, and coronene, GO-2), were studied using the ωB97X-D/6-311G(2d,p) level of theory. The energetic interaction order found was amoxicillin/chitosan > amoxicillin/GO-1 > amoxicillin/GO-2 > ibuprofen/chitosan > ibuprofen/GO-2 > ibuprofen/GO-1, the negative sign for the interaction energy in all complex formations confirms good compatibility, while the size of Eint between 24-34 kcal/mol indicates physisorption processes. Moreover, the free energies of complex formation were negative, confirming the spontaneity of the processes. The larger interaction of amoxicillin Gos, compared to ibuprofen Gos, is consistent with previously reported experimental results, demonstrating the exceptional predictability of these methods. The second-order perturbation theory analysis shows that the amoxicillin complexes are mainly driven by hydrogen bonds, while van der Waals interactions with chitosan and hydrophobic interactions with graphene oxides are modelled for the ibuprofen complexes. Energy decomposition analysis (EDA) shows that electrostatic energy is a major contributor to the stabilization energy in all cases. The results obtained in this work promote the use of graphene oxides and chitosan as potential adsorbents for the removal of these emerging pollutants from water.

Non-target screening of organic compounds in offshore produced water by GC×GC-MS

Produced water is the largest by-product of oil and gas production. At off-shore installations, the produced water is typically reinjected or discharged into the sea. The water contains a complex mixture of dispersed and dissolved oil, solids and inorganic ions. A better understanding of its composition is fundamental to (1) improve environmental impact assessment tools and (2) develop more efficient water treatment technologies. The objective of the study was to screen produced water sampled from a producing field in the Danish region of the North Sea to identify any containing organic compounds. The samples were taken at a test separator and represent an unfiltered picture of the composition before cleaning procedures. The analytes were isolated by liquid-liquid extraction and derivatized using a silylation reagent to increase the volatility of oxygenated compounds. The final extracts were analyzed by comprehensive multi-dimensional gas chromatography coupled to a high-resolution mass spectrometer. A non-target processing workflow was implemented to extract features and quantify the confidence of library matches by correlation to retention indices and the presence of molecular ions. Approximately 120 unique compounds were identified across nine samples. Of those, 15 were present in all samples. The main types of compounds are aliphatic and aromatic carboxylic acids with a small fraction of hydrocarbons. The findings have implications for developing improved environmental impact assessment tools and water remediation technologies.

Vitamin C assisted synthesis of rGO-Ag/PANI nanocomposites for improved photocatalytic degradation of pharmaceutical wastes

A highly efficient visible light active polyaniline (PANI)/Ag composites grafted reduced graphene oxide (rGO-Ag/PANI) was prepared for the efficient photocatalytic degradation of paracetamol. The structural, morphological, and light absorption properties of the as-synthesized rGO-Ag/PANI were characterized by UV-Visible (UV-Vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Paracetamol was taken as a model water pollutant to investigate the photocatalytic degradation efficiency of the rGO-PANI/Ag nanocomposites under visible light radiation. The result shows the degradation of paracetamol to be 99.6% in the acidic medium (pH 5) and 75.76% in the basic medium (pH 9), respectively. The enhanced degradation efficiency is attributed to the synergetic effect of rGO, PANI, and Ag NPs in the nanocomposites. This synergy of the rGO-Ag/PANI is explained by the strong adsorption efficiency, charge separation, and light absorption in the visible region.

Occurrence and Fate of Emerging Pollutants in Water Environment and Options for Their Removal

Emerging pollutants (EPs) are chemicals known to cause major impacts on the terrestrial, aquatic life and human health as a result of their chronic and acute toxicity. Although lots of studies on EPs behavior in the aquatic environment are currently available in literature, an urgent requirement exists to complete toxicological studies and develop and implement efficient and ecological methods for their removal. This paper raises some relevant problems related to water environment pollution with EPs, the risks they can generate for aquatic life and humans and opportunities to reduce the effects of pollution by EPs removal. Categories of emerging chemicals of concern in the environment, their sources, fate and impacts, with some examples are discussed. Organic UV filters are shortly presented as a relative new EPs category, with a focus on the need to develop extensive experimental studies on their environmental occurrence, fate and removal. Furthermore, sources for the aquatic environment resulting from discharging EPs directly into rivers from wastewater treatment plants are examined. The incidence of environmental and human health risks related to EPs is also considered. The removal of EPs from the environment as a solution to risk mitigation is addressed, with emphasis on several non-conventional processes involving biological removal of EPs. The paper provides a critical look at the current challenges posed by the presence of emerging pollutants in the aquatic environment, with critical comments and recommendations for further research to reduce the impact of EPs on water and human health and improve the performance of developed methods for their removal.

Conditions that promote the formation of black bloom in aquatic microcosms and its effects on sediment bacteria related to iron and sulfur cycling

Black bloom occurs frequently in eutrophic waters. We investigated the conditions promoted the formation of black bloom via in-situ measurement in two aquatic microcosms and the effects of black bloom on the bacterial community composition. Although larger changes in dissolved oxygen (DO) were detected in the Hydrilla verticillata-dominated microcosm over the 90-day simulation, black bloom occurred more readily in the phytoplankton-dominated than macrophyte-dominated microcosm under conditions of O₂ depletion and temperature above 30 °C. The sediment bacterial community composition shifted after black bloom; the relative abundance of Thiobacillus and Sideroxydans, which oxidize iron (Fe) and sulfur (S), decreased by 47% and 48%, respectively, in the phytoplankton-dominated microcosm and by 18% and 20% in the macrophyte-dominated microcosm. By contrast, Desulfatiglans increased by 13% and 19%, respectively, after black bloom. Furthermore, inter-taxa correlations remarkably changed according to co-occurrence network analysis. Thirty-six different taxa from the phylum to the genus level were identified as biomarkers of sediments collected before and after the black bloom event. Most of these biomarkers are related to Fe/S cycling in aquatic ecosystems.

Microplastic's story

The problem of microplastic pollution is now the order of the day in front of everyone's eyes affecting the environment and the health of leaving creature. This work aims to retrace the history of microplastics in a critical way through a substantial bibliographic collection, defining the points still unresolved and those that can be resolved. Presence of marine litter in different environments is reviewed on a global scale, focusing in particular on micro and macro plastics definition, classification and characterization techniques.

Sorption and biodegradation parameters of selected pharmaceuticals in laboratory column experiments

Pharmaceutically active compounds have increasingly been detected in groundwater worldwide. Despite constituting a risk for human health and ecosystems, their fate in the environment has still not been exhaustively investigated. This study characterizes the transport behavior of five selected pharmaceutically active compounds (antipyrine, atenolol, caffeine, carbamazepine and sulfamethoxazole) in two sediments (coarse quartz sand and sandy loam) using column experiments with long-term injection of spiked groundwater. Transport parameters were estimated using an analytical reactive transport model. When five selected compounds were injected simultaneously, transport behavior of antipyrine, carbamazepine and the antibiotic sulfamethoxazole were similar to the conservative tracer in both sediments and under varying redox conditions. Atenolol and caffeine were retarded significantly stronger in the sandy loam sediment than in the coarse quartz sand. Biodegradation of caffeine was observed in both sediments after an adaption period and depended on dissolved oxygen. The identification of biodegradation processes was supported by monitoring of intracellular adenosine triphosphate (ATP_itc) as a measure for microbial activity. ATP_itc was present in varying concentrations in all sediments and was highest when biodegradation of pharmaceuticals, especially caffeine, was observed. When only caffeine and sulfamethoxazole were injected simultaneously, sulfamethoxazole was degraded while caffeine degradation was reduced. The latter seemed to be influenced by low concentrations in dissolved oxygen rather than the presence of the antibiotic sulfamethoxazole. Results of these experiments emphasize the impact on pharmaceutical sorption and (bio)degradation of sediment type and redox conditions, as well as available time for microbial adaption and the combination of pharmaceuticals that are released together into groundwater.

Column Experiments on Sorption Coefficients and Biodegradation Rates of Selected Pharmaceuticals in Three Aquifer Sediments

The presence of pharmaceuticals in the environment, and in groundwater, has been recognized as a great environmental concern. Biodegradation and sorption are the main processes leading to the removal of contamination from the water phase. The aim of this study was to determine the transport processes of selected pharmaceuticals (antipyrine, atenolol, carbamazepine, caffeine, diclofenac, ketoprofen, sulfamethoxazole) in selected sediments (coarse sand, medium sand, sandy loam) in laboratory experiments. Moreover, the impact of flow velocities on the sorption and degradation rates of the selected compounds was studied. Column experiments were performed at three flow velocities, under abiotic and biotic conditions, applying conservative (bromide) and reactive tracers (pharmaceuticals). From the breakthrough curves, retardation factors and degradation rates were determined and the influence of variable flow conditions on transport parameters was evaluated. Low observed concentrations and recoveries of atenolol indicated a strong influence of sorption on its transport. Diclofenac, caffeine, and carbamazepine were also affected by sorption but to a lesser extent. Sulfamethoxazole, ketoprofen, and antipyrine were recovered nearly completely, indicating an almost conservative transport behavior. Biodegradation was small for all the compounds, as the results from biotic and abiotic column experiments were similar. Transport of the tested pharmaceuticals was not influenced by different flow velocities, as similar modelled degradation rates and retardation factors were found for all tested flow velocities.