Biochemical and physical characterization of parvovirus minute virus of mice virus-like particles

Identification of the sialic acid structures recognized by minute virus of mice and the role of binding affinity in virulence adaptation

Sialic acid binding is required for infectious cell surface receptor recognition by parvovirus minute virus of mice (MVM). We have utilized a glycan array consisting of approximately 180 different carbohydrate structures to identify the specific sialosides recognized by the prototype (MVMp) and immunosuppressive (MVMi) strains of MVM plus three virulent mutants of MVMp, MVMp-I362S, MVMp-K368R, and MVMp-I362S/K368R. All of the MVM capsids specifically bound to three structures with a terminal sialic acid-linked alpha2-3 to a common Galbeta1-4GlcNAc motif: Neu5Acalpha2-3Galbeta1-4GlcNAcbeta1-4Galbeta1-4GlcNAc (3'SiaLN-LN), Neu5Acalpha2-3Galbeta1-4GlcNAcbeta1-3Galbeta1-4GlcNAcbeta1-3Galbeta1-4GlcNAc (3'SiaLN-LN-LN), and Neu5Acalpha2-3Galbeta1-4(Fucalpha1-3)-GlcNAcbeta1-3Galbeta1-4(Fucalpha1-3)GlcNAcbeta1-3Galbeta1-4(Fucalpha1-3)GlcNAc (sLe(x)-Le(x)-Le(x)). In addition, MVMi also recognized four multisialylated glycans with terminal alpha2-8 linkages: Neu5Acalpha2-8Neu5Acalpha2-8Neu5Acalpha ((Sia)(3)), Neu5Acalpha2-8Neu5Acalpha2-3Galbeta1-4Glc (GD3), Neu5Acalpha2-8Neu5Acalpha2-8Neu5Acalpha2-3Galbeta1-4Glc (GT3), and Neu5Acalpha2-8Neu5Acalpha2-3(GalNAcbeta1-4)Galbeta1-4Glc (GD2). Interestingly, the virulent MVMp-K368R mutant also recognized GT3. Analysis of the relative binding affinities using a surface plasmon resonance biospecific interaction (BIAcore) assay showed the wild-type MVMp and MVMi capsids binding with higher affinity to selected glycans compared with the virulent MVMp mutants. The reduced affinity of the virulent MVMp mutants are consistent with previous in vitro cell binding assays that had shown weaker binding to permissive cells compared with wild-type MVMp. This study identifies the sialic acid structures recognized by MVM. It also provides rationale for the tropism of MVM for malignant transformed cells that contain sLe(x) motifs and the neurotropism of MVMi, which is likely mediated via interactions with multisialylated glycans known to be tumor cell markers. Finally, the observations further implicate a decreased binding affinity for sialic acid in the in vivo adaptation of MVMp to a virulent phenotype.

Structural Tolerance versus Functional Intolerance to Mutation of Hydrophobic Core Residues Surrounding Cavities in a Parvovirus Capsid

The structural and functional relevance of amino acid residues surrounding cavities within the hydrophobic core of the protein subunits that form the capsid of parvoviruses has been investigated. Several of the evolutionarily conserved, hydrophobic residues that delimit these cavities in the capsid of the minute virus of mice were replaced by other hydrophobic residues that would affect the size and/or shape of the cavity. When four or more methylene-sized groups were introduced, or six or more groups removed, capsid assembly was drastically impaired. In contrast, the introduction or removal of up to three groups had no significant effect on capsid assembly or thermostability. However, many of these mutations affected a capsid conformational transition needed for viral infectivity. Replacement of some polar residues around the largest cavity showed that capsid assembly requires a carboxylate buried within this cavity, but both aspartate and glutamate are structurally accepted. Again, only the aspartate allowed the production of infectious viruses, because of a specific role in encapsidation of the viral genome. These observations provide evidence of a remarkable structural tolerance to mutation of the hydrophobic core of the protein subunits in a viral capsid, and of an involvement of core residues and internal cavities in capsid functions needed for infectivity.

Modeling Virus Self-Assembly Pathways: Avoiding Dynamics Using Geometric Constraint Decomposition

We develop a model for elucidating the assembly pathways by which an icosahedral viral shell forms from 60 identical constituent protein monomers. This poorly understood process a remarkable example of macromolecular self-assembly occuring in nature and possesses many features that are desirable while engineering self-assembly at the nanoscale. The model uses static geometric and tensegrity constraints to represent the driving (weak) forces that cause a viral shell to assemble and hold it together. The goal is to answer focused questions about the structural properties of a successful assembly pathway. Pathways and their properties are carefully defined and computed using computational algebra and geometry, specifically state-of-art concepts in geometric constraint decomposition. The model is analyzable and refinable and avoids expensive dynamics. We show that it has a provably tractable and accurate computational simulation and that its predictions are roughly consistent with known information about viral shell assembly. Justifications for mathematical and biochemical assumptions are provided, and comparisons are drawn with other virus assembly models. A method for more conclusive experimental validation involving specific viruses is sketched. Overall, the paper indicates a strong and direct, mutually beneficial interplay between (a) the concepts underlying macromolecular assembly; and (b) a wide variety of established as well as novel concepts from combinatorial and computational algebra, geometry and algebraic complexity.

Nuclear Transport of Trimeric Assembly Intermediates Exerts a Morphogenetic Control on the Icosahedral Parvovirus Capsid

The connection between nuclear transport and morphogenesis of a large macromolecular entity has been investigated using the karyophylic capsid of the parvovirus minute virus of mice (MVM) as a model. The VP1 (82 kDa) and VP2 (63 kDa) proteins forming the T = 1 icosahedral MVM capsid at the respective 1:5 molar ratio of synthesis, could be covalently cross-linked with dimethyl suberimidate into two types of oligomeric assemblies, which were present at stoichiometric amounts in infected cell extracts and purified viral particles. The larger species contained VP1 and corresponded in size (200 kDa) to a heterotrimer of one VP1 and two VP2 subunits. The smaller species contained VP2 only and corresponded in size (180 kDa) to a homotrimer. The introduction of bulky residues or the truncation of side-chains involved in multiple interactions at the interfaces between trimers of VPs in the MVM capsid, produced the accumulation of trimeric intermediates that were competent in nuclear translocation but not in capsid assembly. These results indicate that MVM maturation proceeds by cytoplasmic oligomerization of the capsid subunits into two types of trimers, which are the assembly intermediates competent to translocate across the nuclear membrane. Consistent with this conclusion, mutations at basic residues that inactivate a previously identified beta-stranded nuclear localization motif, which notably are not involved in inter or intra-subunit contacts, led to cytoplasmic retention of the two types of trimers, with no evidence for other assembly intermediates. Although a fraction of the VP1-containing trimers were translocated into the nucleus driven by the conventional nuclear transport signal of VP1 N terminus, their further assembly in the absence of the VP2-only trimers yielded large molecular mass amorphous aggregates. Therefore, the nuclear transport stoichiometry of assembly intermediates may exert a morphogenetic quality control on macromolecular complexes like the MVM capsid.

Host-selected amino acid changes at the sialic acid binding pocket of the parvovirus capsid modulate cell binding affinity and determine virulence

The role of receptor recognition in the emergence of virulent viruses was investigated in the infection of severe combined immunodeficient (SCID) mice by the apathogenic prototype strain of the parvovirus minute virus of mice (MVMp). Genetic analysis of isolated MVMp viral clones (n = 48) emerging in mice, including lethal variants, showed only one of three single changes (V325M, I362S, or K368R) in the common sequence of the two capsid proteins. As was found for the parental isolates, the constructed recombinant viruses harboring the I362S or the K368R single substitutions in the capsid sequence, or mutations at both sites, showed a large-plaque phenotype and lower avidity than the wild type for cells in the cytotoxic interaction with two permissive fibroblast cell lines in vitro and caused a lethal disease in SCID mice when inoculated by the natural oronasal route. Significantly, the productive adsorption of MVMp variants carrying any of the three mutations selected through parallel evolution in mice showed higher sensitivity to the treatment of cells by neuraminidase than that of the wild type, indicating a lower affinity of the viral particle for the sialic acid component of the receptor. Consistent with this, the X-ray crystal structure of the MVMp capsids soaked with sialic acid (N-acetyl neuraminic acid) showed the sugar allocated in the depression at the twofold axis of symmetry (termed the dimple), immediately adjacent to residues I362 and K368, which are located on the wall of the dimple, and approximately 22 A away from V325 in a threefold-related monomer. This is the first reported crystal structure identifying an infectious receptor attachment site on a parvovirus capsid. We conclude that the affinity of the interactions of sialic-acid-containing receptors with residues at or surrounding the dimple can evolutionarily regulate parvovirus pathogenicity and adaptation to new hosts.

Low pH-dependent endosomal processing of the incoming parvovirus minute virus of mice virion leads to externalization of the VP1 N-terminal sequence (N-VP1), N-VP2 cleavage, and uncoating of the full-length genome

Minute virus of mice (MVM) enters the host cell via receptor-mediated endocytosis. Although endosomal processing is required, its role remains uncertain. In particular, the effect of low endosomal pH on capsid configuration and nuclear delivery of the viral genome is unclear. We have followed the progression and structural transitions of DNA full-virus capsids (FC) and empty capsids (EC) containing the VP1 and VP2 structural proteins and of VP2-only virus-like particles (VLP) during the endosomal trafficking. Three capsid rearrangements were detected in FC: externalization of the VP1 N-terminal sequence (N-VP1), cleavage of the exposed VP2 N-terminal sequence (N-VP2), and uncoating of the full-length genome. All three capsid modifications occurred simultaneously, starting as early as 30 min after internalization, and all of them were blocked by raising the endosomal pH. In particles lacking viral single-stranded DNA (EC and VLP), the N-VP2 was not exposed and thus it was not cleaved. However, the EC did externalize N-VP1 with kinetics similar to those of FC. The bulk of all the incoming particles (FC, EC, and VLP) accumulated in lysosomes without signs of lysosomal membrane destabilization. Inside lysosomes, capsid degradation was not detected, although the uncoated DNA of FC was slowly degraded. Interestingly, at any time postinfection, the amount of structural proteins of the incoming virions accumulating in the nuclear fraction was negligible. These results indicate that during the early endosomal trafficking, the MVM particles are structurally modified by low-pH-dependent mechanisms. Regardless of the structural transitions and protein composition, the majority of the entering viral particles and genomes end in lysosomes, limiting the efficiency of MVM nuclear translocation.

Structural determinants of tissue tropism and in vivo pathogenicity for the parvovirus minute virus of mice

Two strains of the parvovirus minute virus of mice (MVM), the immunosuppressive (MVMi) and the prototype (MVMp) strains, display disparate in vitro tropism and in vivo pathogenicity. We report the crystal structures of MVMp virus-like particles (MVMp(b)) and native wild-type (wt) empty capsids (MVMp(e)), determined and refined to 3.25 and 3.75 A resolution, respectively, and their comparison to the structure of MVMi, also refined to 3.5 A resolution in this study. A comparison of the MVMp(b) and MVMp(e) capsids showed their structures to be the same, providing structural verification that some heterologously expressed parvovirus capsids are indistinguishable from wt capsids produced in host cells. The structures of MVMi and MVMp capsids were almost identical, but local surface conformational differences clustered from symmetry-related capsid proteins at three specific domains: (i) the icosahedral fivefold axis, (ii) the "shoulder" of the protrusion at the icosahedral threefold axis, and (iii) the area surrounding the depression at the icosahedral twofold axis. The latter two domains contain important determinants of MVM in vitro tropism (residues 317 and 321) and forward mutation residues (residues 399, 460, 553, and 558) conferring fibrotropism on MVMi. Furthermore, these structural differences between the MVM strains colocalize with tropism and pathogenicity determinants mapped for other autonomous parvovirus capsids, highlighting the importance of common parvovirus capsid regions in the control of virus-host interactions.

Functional Relevance of Amino Acid Residues Involved in Interactions with Ordered Nucleic Acid in a Spherical Virus

In the spherical virion of the parvovirus minute virus of mice, several amino acid side chains of the capsid were previously found to be involved in interactions with the viral single-stranded DNA molecule. We have individually truncated by mutation to alanine many (ten) of these side chains and analyzed the effects on capsid assembly, stability and conformation, viral DNA encapsidation, and virion infectivity. Mutation of residues Tyr-270, Asp-273, or Asp-474 led to a drastic reduction in infectivity. Mutant Y270A was defective in capsid assembly; mutant D273A formed stable capsids, but it was essentially unable to encapsidate the viral DNA or to externalize the N terminus of the capsid protein VP2, a connected conformational event. Mutation of residues Asp-58, Trp-60, Asn-183, Thr-267, or Lys-471 led to a moderate reduction in infectivity. None of these mutations had an effect on capsid assembly or stability, or on the DNA encapsidation process. However, those five mutant virions were substantially less stable than the parental virion in thermal inactivation assays. The results with this model spherical virus indicate that several capsid residues that are found to be involved in polar interactions or multiple hydrophobic contacts with the viral DNA molecule contribute to preserving the active conformation of the infectious viral particle. Their effect appears to be mediated by the non-covalent interactions they establish with the viral DNA. In addition, at least one acidic residue at each DNA-binding region is needed for DNA packaging.

Nuclear export of the nonenveloped parvovirus virion is directed by an unordered protein signal exposed on the capsid surface

It is uncertain whether nonenveloped karyophilic virus particles may actively traffic from the nucleus outward. The unordered amino-terminal domain of the VP2 major structural protein (2Nt) of the icosahedral parvovirus minute virus of mice (MVM) is internal in empty capsids, but it is exposed outside of the shell through the fivefold axis of symmetry in virions with an encapsidated single-stranded DNA genome, as well as in empty capsids subjected to a heat-induced structural transition. In productive infections of transformed and normal fibroblasts, mature MVM virions were found to efficiently exit from the nucleus prior to cell lysis, in contrast to the extended nuclear accumulation of empty capsids. Newly formed mutant viruses lacking the three phosphorylated serine residues of 2Nt were hampered in their exit from the human transformed NB324K nucleus, in correspondence with the capacity of 2Nt to drive microinjected phosphorylated heated capsids out of the nucleus. However, in normal mouse A9 fibroblasts, in which the MVM capsid was phosphorylated at similar sites but with a much lower rate, the nuclear exit of virions and microinjected capsids harboring exposed 2Nt required the infection process and was highly sensitive to inhibition of the exportin CRM1 in the absence of a demonstrable interaction. Thus, the MVM virion exits the nucleus by accessing nonconventional export pathways relying on cell physiology that can be intensified by infection but in which the exposure of 2Nt remains essential for transport. The flexible 2Nt nuclear transport signal may illustrate a common structural solution used by nonenveloped spherical viruses to propagate in undamaged host tissues.

The ubiquitin-proteasome machinery is essential for nuclear translocation of incoming minute virus of mice

Minute virus of mice (MVM) infection is disrupted by proteasome inhibitors. Here, we show that inhibition of the ubiquitin-proteasome pathway did not affect viral entry and had influence neither on the natural proteolytic cleavage of VP2 to VP3 nor on the externalization of the N terminal of VP1. In both MG132-treated and untreated cells, MVM particles accumulated progressively in the perinuclear region. However, in MG132-treated cells, MVM was not able to penetrate into the nuclei, remaining blocked in the perinuclear region without capsid disassembly. MVM was similarly sensitive to MG132 in the two cell lines tested, A9 and NB324K. After releasing from the reversible MG132 block, MVM recovered the ability to translocate to the nuclei and replicate. Analysis of viral capsid proteins during internalization showed no evidence of capsid ubiquitination or degradation. We examined the effect of MG132 on two other parvoviruses, canine (CPV) and bovine parvovirus (BPV). Similarly to MVM, CPV infection was sensitive to MG132; however, BPV infection, as previously shown for adeno-associated viruses (AAVs), was not disturbed. These findings suggest that parvoviruses follow divergent strategies for nuclear transport, some of them requiring active proteasomes.

Role of interfacial amino acid residues in assembly, stability, and conformation of a spherical virus capsid

Twenty-eight amino acid residues involved in most noncovalent interactions between trimeric protein subunits in the capsid of the parvovirus minute virus of mice were truncated individually to alanine, and the effects on capsid assembly, thermostability, and conformation were analyzed. Only seven side chains were essential for protein subunit recognition. These side chains virtually corresponded with those that either buried a large hydrophobic surface on trimer association or formed buried intertrimer hydrogen bonds or salt bridges. The seven residues are evolutionarily conserved, and they define regularly spaced spots on a thin equatorial belt surrounding each trimer. Truncation of the many side chains that were dispensable for assembly, including those participating in solvent-accessible polar interactions, did not substantially affect capsid thermostability either. However, the interfacial residues located at the base of the pores delineating the capsid five-fold axes participated in a heat-induced conformational rearrangement associated with externalization of the capsid protein N terminus, and they were needed for infectivity. Thus, at the subunit interfaces of this model virus capsid, only key residues involved in the strongest interactions are critical for assembly and stability, but additional residues fulfill other important biological roles.

In vitro disassembly of a parvovirus capsid and effect on capsid stability of heterologous peptide insertions in surface loops

We have analyzed the in vitro disassembly of the capsid of the minute virus of mice, and the stability of capsid chimeras carrying heterologous epitope insertions. Upon heating in a physiological buffer, empty capsids formed by 60 copies of protein VP2 underwent first a reversible conformational change with a small enthalpy change detected by fluorescence. This change was associated with, but not limited to, externalization of the VP2 N terminus. Irreversible capsid dissociation as detected by changes in fluorescence, hemagglutination activity, and electrophoretic mobility occurred at much higher temperatures. Differential scanning calorimetry in the same conditions indicated that the dissociation/denaturation transition involved a high enthalpy change and proceeded through one or more intermediates. In contrast, in the presence of 1.5 M guanidinium chloride, heat-induced disassembly fitted a two-state irreversible process. Both thermally and chemically induced dissociation/denaturation yielded a form that had lost a part of the tertiary structure, but still retained the native secondary structure. Data from chemical dissociation indicates this form may correspond to a molten globule-like monomeric state of the capsid protein. All five antigenic peptide insertions attempted in exposed loops, despite being perhaps among the least disruptive, led to defects in folding/assembly of the capsid and, in most cases, to reduced capsid stability against thermal dissociation. The results with one of the simplest viral capsids reveal a complex pathway for disassembly, and a reduction in capsid assembly and stability upon insertion of peptides, even within the most exposed capsid loops.

Serodiagnosis of mice minute virus and mouse parvovirus infections in mice by enzyme-linked immunosorbent assay with baculovirus-expressed recombinant VP2 proteins

Mice minute virus (MMV) and mouse parvovirus (MPV) type 1 are the two parvoviruses known to naturally infect laboratory mice and are among the most prevalent infectious agents found in contemporary laboratory mouse colonies. Serologic assays are commonly used to diagnose MMV and MPV infections in laboratory mice; however, highly accurate, high-throughput serologic assays for the detection of MMV- and MPV-infected mice are needed. To this end, the major capsid viral protein (VP2) genes of MMV and MPV were cloned and MMV recombinant VP2 (rVP2) and MPV rVP2 proteins were expressed by using a baculovirus system. MMV rVP2 and MPV rVP2 spontaneously formed virus-like particles that were morphologically similar to empty parvovirus capsids. These proteins were used as antigens in enzyme-linked immunosorbent assays (ELISAs) to detect anti-MMV or anti-MPV antibodies in the sera of infected mice. Sera from mice experimentally infected with MMV (n = 43) or MPV (n = 35) and sera from uninfected mice (n = 30) were used to evaluate the ELISAs. The MMV ELISA was 100% sensitive and 100% specific in detecting MMV-infected mice, and the MPV ELISA was 100% sensitive and 98.6% specific in detecting MPV-infected mice. Both assays outperformed a parvovirus ELISA that uses a recombinant nonstructural protein (NS1) of MMV as antigen. The MMV rVP2 and MPV rVP2 proteins provide a ready source of easily produced antigen, and the ELISAs developed provide highly accurate, high-throughput assays for the serodiagnosis of MMV and MPV infections in laboratory mice.

Complementary roles of multiple nuclear targeting signals in the capsid proteins of the parvovirus minute virus of mice during assembly and onset of infection

This report describes the distribution of conventional nuclear localization sequences (NLS) and of a beta-stranded so-called nuclear localization motif (NLM) in the two proteins (VP1, 82 kDa; VP2, 63 kDa) forming the T=1 icosahedral capsid of the parvovirus minute virus of mice (MVM) and their functions in viral biogenesis and the onset of infection. The approximately 10 VP1 molecules assembled in the MVM particle harbor in its 142-amino-acid (aa) N-terminal-specific region four clusters of basic amino acids, here called BC1 (aa 6 to 10), BC2 (aa 87 to 90), BC3 (aa 109 to 115), and BC4 (aa 126 to 130), that fit consensus NLS and an NLM placed toward the opposite end of the polypeptide (aa 670 to 680) found to be necessary for VP2 nuclear uptake. Deletions and site-directed mutations constructed in an infectious MVM plasmid showed that BC1, BC2, and NLM are cooperative nuclear transport sequences in singly expressed VP1 subunits and that they conferred nuclear targeting competence on the VP1/VP2 oligomers arising in normal infection, while BC3 and BC4 did not display nuclear transport activity. Notably, VP1 proteins mutated at BC1 and -2, and particularly with BC1 to -4 sequences deleted, induced nuclear and cytoplasmic foci of colocalizing conjugated ubiquitin that could be rescued from the ubiquitin-proteasome degradation pathway by the coexpression of VP2 and NS2 isoforms. These results suggest a role for VP2 in viral morphogenesis by assisting cytoplasmic folding of VP1/VP2 subviral complexes, which is further supported by the capacity of NLM-bearing transport-competent VP2 subunits to recruit VP1 into the nuclear capsid assembly pathway regardless of the BC composition. Instead, all four BC sequences, which are located in the interior of the capsid, were absolutely required by the incoming infectious MVM particle for the onset of infection, suggesting either an important conformational change or a disassembly of the coat for nuclear entry of a VP1-associated viral genome. Therefore, the evolutionarily conserved BC sequences and NLM domains provide complementary nuclear transport functions to distinct supramolecular complexes of capsid proteins during the autonomous parvovirus life cycle.

Production of core and virus-like particles with baculovirus infected insect cells

In this paper the fundamental aspects of process development for the production of core and virus-like particles with baculovirus infected insect cells are reviewed. The issues addressed include: particle formation and monomer composition, chemical and physical conditions for optimal cell growth, baculovirus replication and product expression, multiplicity of infection strategy, and scale-up of the process. Study of the differences in the metabolic requirements of infected and non-infected cells is necessary for high cell density processes. In the bioreactor, the specific oxygen uptake rate (OURsp) plays a central role in process scale-up, leading to the specification of the bioreactor operational parameters. Shear stress can also be an important variable for bioreactor operation due to its influence on cell growth and product expression. The determination of the critical variables in process development is discussed, showing the relevance of the mathematical models that have been developed for the insect cells/baculovirus system in process implementation and control.

The structure of porcine parvovirus: comparison with related viruses

The structure of baculovirus-expressed porcine parvovirus (PPV) capsids was solved using X-ray crystallography and was found to be similar to the related canine parvovirus (CPV) and minute virus of mice (MVM). The PPV capsid protein has 57 % and 49 % amino acid sequence identity with CPV and MVM, respectively, but the degree of conservation of surface-exposed residues is lower than average. Consequently, most of the structural differences are on the surface and are the probable cause of the known variability in antigenicity and host range. The NADL-2 and Kresse strains of PPV have distinct tissue tropisms and pathogenicity, which are mediated by one or more of the amino acid residues 381, 386, and 436. These residues are on or near the surface of the virus capsid, where they are likely to be associated with virus-cell interactions.

Canine parvovirus capsid assembly and differences in mammalian and insect cells

We examined the assembly processes of the capsid proteins of canine parvovirus (CPV) in mammalian and insect cells. In CPV-infected cells empty capsids assembled within 15 min, and then continued to form over the following 1 h, while full (DNA-containing) capsids were detected only after 60 min, and those accumulated slowly over several hours. In cells expressing VP1 and VP2 or only VP2, empty capsid formation was also efficient, but was slightly slower than that in infected cells. Small amounts of trimer forms of VP2 were detected in cells expressing wild type capsid proteins, but were not seen for mutants containing changes that prevented capsid assembly. CPV capsids accumulated in the cell nucleus, but mutant VP1 and VP2 proteins that did not assemble became distributed throughout the nucleus and the cytoplasm, irrespective of whether they were expressed as VP1 and VP2, or as VP2 only. Urea or pH treatment of empty capsids released dimer, trimer, or pentamer capsid protein combinations, while treatment of full capsids consistently released trimer and, in some cases, pentamer forms. When wild type or assembly-defective VP2 genes were expressed from recombinant baculoviruses in insect cells, most of the protein was recovered as noncapsid aggregates, and only a small proportion assembled into capsids. Both the assembled capsids and the noncapsid aggregates were seen primarily in the cytoplasm of the insect cells. The VP2 expressed in insect cells that was recovered in aggregates had an isoelectric point of about pH 6.3, while that recovered from assembled capsids had a pI of about 5.2, similar to that seen for the VP2 of capsids recovered from mammalian cells.

Phosphorylation status of the parvovirus minute virus of mice particle: mapping and biological relevance of the major phosphorylation sites

The core of the VP-1 and VP-2 proteins forming the T=1 icosahedral capsid of the prototype strain of the parvovirus minute virus of mice (MVMp) share amino acids sequence and a common three-dimensional structure; however, the roles of these polypeptides in the virus infection cycle differ. To gain insights into this paradox, the nature, distribution, and biological significance of MVMp particle phosphorylation was investigated. The VP-1 and VP-2 proteins isolated from purified empty capsids and from virions containing DNA harbored phosphoserine and phosphothreonine amino acids, which in two-dimensional tryptic analysis resulted in complex patterns reproducibly composed by more than 15 unevenly phosphorylated peptides. Whereas secondary protease digestions and comigration of most weak peptides in the fingerprints revealed common phosphorylation sites in the VP-1 and VP-2 subunits assembled in capsids, the major tryptic phosphopeptides were remarkably characteristic of either polypeptide. The VP-2-specific peptide named B, containing the bulk of the (32)P label of the MVMp particle in the form of phosphoserine, was mapped to the structurally unordered N-terminal domain of this polypeptide. Mutations in any or all four serine residues present in peptide B showed that the VP-2 N-terminal domain is phosphorylated at multiple sites, even though none of them was essential for capsid assembly or virus formation. Chromatographic analysis of purified wild-type (wt) and mutant peptide B digested with a panel of specific proteases allowed us to identify the VP-2 residues Ser-2, Ser-6, and Ser-10 as the main phosphate acceptors for MVMp capsid during the natural viral infection. Phosphorylation at VP-2 N-terminal serines was not necessary for the externalization of this domain outside of the capsid shell in particles containing DNA. However, the plaque-forming capacity and plaque size of VP-2 N-terminal phosphorylation mutants were severely reduced, with the evolutionarily conserved Ser-2 determining most of the phenotypic effect. In addition, the phosphorylated amino acids were not required for infection initiation or for nuclear translocation of the expressed structural proteins, and thus a role at a late stage of MVMp life cycle is proposed. This study illustrates the complexity of posttranslational modification of icosahedral viral capsids and underscores phosphorylation as a versatile mechanism to modulate the biological functions of their protein subunits.